Decorative finishing of doorways without doors. How to ennoble the doorway of the front door - professional advice. Tools and materials

To increase the space, as well as just for aesthetic purposes, door blocks are removed on interior partitions. During the redevelopment of the apartment, most often they equip a free passage between the hallway and the hall. No less popular is an opening without a door, which combines the kitchen with the living room. The expansion of space occurs due to getting rid of the dead zone reserved for opening the sash. However, redevelopment creates new problem related to the design doorway without a door, which is sometimes difficult for the owner to solve.

In the house, not every opening can be left without a door. The open passage of the bathroom or pantry will look ridiculous. The secluded area is considered to be the kitchen, bedroom and office, but there is an exception to the rule for these rooms. To organize intimacy, the openings are finished with curtains, sliding screens and other similar devices. As a result, a visual illusion of separation of rooms is created, while the space remains without a dead zone.

Open passages emphasize the integrity of the living space. All openings are made of the same shape and decorated with material similar in structure to form a single ensemble.

They get rid of the door leaf when making an opening between the kitchen and the living room, or when one of these rooms is connected to the hallway. However, it is desirable to provide visual separation at least with curtains.

If a gas stove is installed in the kitchen, for safety reasons the room will have to be fenced off with at least a sliding system.

Free passage is arranged when combining a hall or kitchen with a balcony. The process involves the simultaneous removal of the door and window frames. If an office or a small bedroom is set up on the balcony, the rooms are separated by curtains or a screen.

When we are not talking about fencing off a kitchen with a gas stove, the passage is often decorated with shelves. Curly flowers, figurines and other elements are placed on decorative shelving.

Getting rid of the door not only expands the space. Air circulates freely through open passages. Even in a small apartment in the summer it becomes fresher.

When making an opening, doors are not required in the following cases:

A modern solution for redevelopment is an interior portal that allows you to save the rectangular shape of the opening. Without a door, the passage becomes freer, and the decoration of massive decorative elements gives aesthetics.

Popular are arched passages. In an apartment with high ceilings, they prefer the classics, equipping the opening with a semicircular configuration. For a building with low ceilings, it is desirable to visually raise the walls with an elliptical arch.

The door block is abandoned by owners who like irregularly configured aisles. When decorating, asymmetric arches, triangles, trapeziums are in demand. A rectangular portal looks beautiful, the corners of which are rounded at different radii. The only negative is the limitation of the passage size. It will not work to make an opening if its width is less than 80 cm.

Doors are abandoned when decorating the passage with a bar counter, stained glass elements, and mosaic fragments. Often such techniques are appropriate for studio apartments.

Advantages and disadvantages

If you compare a beautifully designed open opening with a door block, you will be able to identify a number of advantages:

The integrity of the space of the combined rooms is created. The apartment becomes free, bright, while maintaining the functionality of each zone. The kitchen remains the kitchen, the living room remains the living room.
When framing the doorway, materials that do not require complex maintenance are used. The absence of a sash eliminates the loosening of the box, the formation of a dead zone.
Without a door leaf, the opening can be given an original configuration that allows you to emphasize the style of the interior of the entire room.
Making an interior portal even with the most expensive materials will turn out to be more cost-effective than installing a high-quality door block.

The disadvantage of an open passage is the impossibility of using it for and a pantry. With any type of design, a passage without a door is not able to provide the intimacy of a specific purpose area.

Free ventilation through open openings will bring great inconvenience when combining the kitchen with living rooms. Smells during cooking, along with fat vapors, will spread throughout the apartment.

Forms

You can design the opening while maintaining the original configuration or modify the passage. Often the shape of the structure depends on the materials used for finishing. An important role is played by the skill of the master.

Of all types of doorways, the simplest option is the classic rectangular shape. To assemble such a structure is within the power of an inexperienced person. To design the opening, the entire door block is removed along with the frame. The ends of the walls along the contour are trimmed with decorative cladding. If it is difficult to dismantle the boat, only one leaf can be removed. Sheathe the remaining elements of the frame with MDF or plastic. The disadvantage of this method is the narrowing of the doorway due to the remaining elements of the box.

In the case of arched openings choice of forms huge:

Considered a classic semicircular arch. The transition is suitable for combining any rooms. If the apartment has low ceilings, it is better to refuse a semicircular arch or expand the passage.

arches trapezoidal forms are easier to manufacture, suitable for apartments with low ceilings, often installed when combining a kitchen with a living space. However, designers rarely use a trapezoid due to its association with the shape of ritual accessories.

Fans of unusual configurations prefer triangular arches. The design has many subspecies, more suitable for spacious rooms with high ceilings.

Modern apartments are increasingly equipped with doorways asymmetric forms. The design is easier to make from drywall. For decoration use LED backlight, equip niches, shelves and other decorative elements. Asymmetric designs allow you to hide large defects in the passage and the interior partition itself.

How to decorate a doorway?

When making an opening without a door, almost any material used for wall decoration is suitable. A budget option is a drywall construction, followed by painting or wallpapering. It is optimal to choose a GKL in the manufacture of an asymmetric device. Plastic or MDF will be cheap.

Of more expensive materials used to decorate a doorway fake diamond, tiles, precious woods. The pinnacle of art is the decoration of the passage with stucco.

When choosing the option of finishing a doorway without a door, one must take into account the style of the entire room. The design should harmoniously fit the passage into the interior, and not highlight it as a separate design.

The portal in the apartment is equipped with two types: full - with a top and side elements, two-sided - only side faces without a top. Similarly, they provide for the installation of a threshold and platbands or refuse these elements.

Installation of slopes and plasterboard arches

If you decide to arrange a doorway without a door with your own hands in the form of an arch, it is better to use drywall for decoration. Sheets are inexpensive, easy to cut and install. In the manufacture of the arch, a frame is assembled from a galvanized profile. The structures give the shape of the future opening. The frame is sheathed with fragments cut from GKL sheets. Fixation takes place with self-tapping screws. The finished arch is treated with a primer, a perforated corner is glued, puttied, and after drying it is sanded.

If there is no desire to build an arch, the slopes are simply lined with drywall. To further refine the doorway, water-based paint is used or wallpaper is glued.

How to trim a doorway with stone?

The decoration of the portal with a decorative stone looks stylish. The material is made of natural crumbs with the addition of coloring pigments and polymers. When framing an opening, they rarely adhere to even boundaries. Most often, preference is given to torn edges. To aesthetically decorate the doorway inside the room, use a stone with a small, almost smooth relief pattern. Elements with a deep texture create a bulky design. They are used to finish the openings of the entrance doors from the side of the street.

Decorative stone cuts well, but for corners it is better to use ready-made corner elements. Installation is carried out with an adhesive solution for tiles or liquid nails.

Finishing with dobors and platbands

Simply and tastefully, it will turn out to finish the rectangular doorway and made in the form of planks. Elements are made of wood, MDF or plastic. The latter look less aesthetically pleasing.

From MDF there are ordinary ones, with an edge at the end and telescopic ones. In the first version, the edge of the bar without decorative coating. Joints need to be tight. Edge trims have a finished look. The end is sealed with a decorative film and in case of flaws, the joints look presentable.

They produce flat, rounded and other shapes. Wooden planks can be decorated with carvings. Installation of elements is carried out on glue, nails or self-tapping screws. Telescopic architraves are fixed with a lock to a pre-fixed bar.

Finishing the interior opening MDF

MDF panels will turn out to be a beautiful and inexpensive finish of the portal, only platbands are still selected from a similar material. The disadvantage of facing is the fear of dampness. MDF is better do not use to decorate the passage connecting the kitchen with the living room. If above the oven is organized good system hoods, then dampness does not threaten the material.

To sheathe an MDF doorway, first a frame is constructed from wooden slats. The panels are cut to size and fixed with special metal clips. Between themselves, the planks are joined with a tongue-and-groove locking connection.

MDF panels without locks are planted on adhesive solutions. The frame is not built. For gluing the planks, a perfectly flat surface is prepared. The joints are closed with a decorative strip, and the edges of the passage are framed with platbands.

Decorating a doorway with plastic

The principle of ennobling the opening with plastic resembles a finish MDF panels. Only the material is different. PVC plastic panels are fixed to the frame with fastening clips or glued. The frame is completed by a trim made of a similar material, attached to the guide bar.

PVC panels trim doorway rectangular, semicircular and other configurations. Ready-made kits for lining arches are sold in stores, you just need to choose the product according to the size of the passage.

Advantages of polyurethane stucco

Gypsum stucco is rarely used because of its fragility and heavy weight. If the apartment has high ceilings, and a Venetian or other similar style is chosen for decoration, then the decoration of doorways is carried out with polyurethane elements. The material is not fragile, light, can be painted.

For the installation of such stucco, a flat, durable surface is prepared. Pre-treatment with a deep penetration primer. The elements are fixed with an adhesive mixture. After the glue has hardened, the joints are puttied and then sanded with sandpaper.

wood finish

Lovers of natural materials prefer a wooden portal lined with trims and platbands. When making a door portal with your own hands, you can even use cheap pine wood. After good polishing, treatment with protective impregnations and varnishing, the material will be difficult to distinguish from valuable wood. Decorate wooden portal doorway can be carved ornament.

The elements are being installed on the frame. First, flat planks are fixed to the slopes, then trims are installed. The facing of the doorway is fixed with self-tapping screws. Hats are recessed in drilled secret holes, and rubbed with putty on top. I glue the platbands, fix them with nails or self-tapping screws.

curtain decoration

A simple option to decorate doorways without a door is to hang curtains. The whole process consists in fixing the cornice over the passage. Curtains will hide the opening without a door from the field of view, divert attention, do not clutter up the space. The main requirement is not to use curtains with horizontal opening. They will become an obstacle in the free passage. It is optimal to use curtains for doorways with vertical closing. When open, the curtains are tied to the wall.

If you make every effort, decorating a free interior passage will turn out better than a door block. If expensive materials are used, it is advisable to take the advice of specialists so that the costs are not in vain.

Proper design of the doorway can emphasize the interior and bring zest to it. Therefore, when creating such structures, designers often resort to the most unexpected tricks. In order for the selected finish to harmoniously fit into the design of the room, it is important to clearly understand how best to highlight this part.

Regardless of the type of structure, doors are required to enter it, as well as to communicate between its premises, which are usually installed in doorways. At the same time, to create a presentable appearance input structure and processing slopes, it is necessary to use extensions and platbands. are panels that are designed to gain the missing width of the box and mask the slopes in the opening. Such products are attached to the box and fill the space that forms between the door frame and the other side of the wall. To complete the complex wall decoration, platbands are used. The immediate task of such elements is to frame and create a holistic design.

Advantages of interior openings without and with doors

In the table, we consider the features of each of the options.

Opening without a door	opening with a door
More space	Noise isolation
Visually, the effect of dividing the rooms still remains	thermal insulation
More light	Possibility to put a lock if necessary
Suitable for small spaces	Opportunity to choose the option of doors with glass or plastic inserts for greater "lightness"
Free up space for furniture
Can be original decoration

Options for finishing the doorway without extensions, platbands and doors

Often the opening is trimmed without installing a door leaf. Such a design move allows you to simultaneously erase the boundaries between rooms and at the same time visually make the room more spacious. To create a reliable and spectacular design interior design without doors is not necessarily guided by standard options.

To design an interior doorway, you can use any material used for finishing walls and slopes.

In this case, decoration can be performed using the following materials:

drywall;
clinker tiles;
decorative rock;
siding;
plastic panels;
textile.

Arched structures are often used to improve the internal perception of the interior. At the same time, if the room has standard ceilings, then arches with small roundings will look better here. It is better to decorate an interior passage without extensions and platbands in houses with high ceilings with classic arches in a non-standard design: trapezoidal, elliptical and asymmetric. You can decorate the slopes with brick, wood, stucco, plaster relief overlays, sandrik or artificial stone.

Framing slopes with drywall

The option of decorating slopes with drywall is simple and budgetary. Such material is easy to process and does not require large volumes. preparatory work. has good adhesion, has a long service life and looks great on the wall.

Design with drywall is concise

Decoration with clinker tiles

Due to the variety of colors and ease of use, clinker tiles are often used for wall decoration. Tile is convenient for tiling corners doorways without platbands and extras. This option is suitable for the design of rectangular, arched and semi-arched structures.

Tiles give the room a special style

Stone doorway decoration

In the interior space, decorative stone allows you to hide all the imperfections of the wall, as well as transform the interior. The material is highly resistant to external influences, durable and has excellent aesthetic properties.

Through the use of stone, the entrance structure becomes more interesting.

Plastic panels

With the help of plastic, you can imitate the appearance and texture natural stone, wood and expensive materials. Framing the wall with plastic can visually increase the size of the interior passage and ceilings. Facing in this way can be done independently.

Plastic can imitate expensive materials

siding finish

Due to the textured surface, facing the doorway with siding looks advantageous in any interior. Such material is distinguished by a variety of models and colors, ease of maintenance and installation.

The textured surface of the siding fits perfectly into any interior.

Use of textiles

For decor interior structures expensive and dense textiles can be used. This technique helps to hide the opening, divert attention and lighten the space a little. At the same time, the textile fabric can be of any kind, the main thing is that it ultimately harmonizes with the overall style of the room.

Finishing a doorway with a door

For some rooms, a clear delimitation of space is very important. Therefore, it is customary to leave doors in them. When choosing the design option for such a passage without extensions and platbands, the structures should be selected in accordance with the color and texture of the door leaf. For this, the following can be used:

blinds;
ceramic tile;
tree;
laminate;

shutter doors

There is a double practicality in this idea. Firstly, shutter doors are very original, and often cheaper than standard doors. Secondly, you can decorate the doorway with slats from the blinds, which gives the whole structure a single style.

Blinds in the opening add lightness and airiness

Finishing with ceramic tiles

The tile has a number of advantages, such as ease of maintenance, a large selection of colors and patterns, and durability.

The most important - beautifully cut and join the edges for which you need a special tool.

Tiles are the most practical option

Wood is a timeless classic

If you want your opening to look classic, and at the same time you are for naturalness, then wood is your choice.

natural wood adds warmth, suits many styles in design

Laminate looks expensive

If you want something custom, durable and practical, laminate flooring is a great choice. It's just as easy to install as regular architraves, but it looks much more expensive.

When ennobling the opening of the entrance or interior door take into account the peculiarities of its design. The presence or absence of a sash affects the choice of material. There are many options for finishing the doorway, but when implementing a design idea, one must take into account the harmonious combination with the interior of the entire room.

To choose correct solution for a doorway, first think over its shape. The front door is traditionally associated with a rectangle. Interior rooms in the absence of a sash are given curly configurations.

Classic

Classic style technology allows you to ennoble the passage between rooms without affecting its shape. A traditional rectangle, with or without a sash, is lined with platbands. For finishing wide slopes, extensions are used. As platbands, you can glue a decorative corner. The stained-glass windows above the doorway, made of multi-colored glass inserts, look beautiful.

Arch

The arched shape is considered the most popular way to decorate an opening without a sash. Its advantage lies in smoothing sharp corners. Smooth upper transitions door structure let the imagination run wild. In low rooms, the arch visually makes the ceiling higher, and in high rooms - lower. The effect is achieved due to the size of the structure. The more the arch expands, the lower the ceiling appears.

The wood frame of the arched doorway between the rooms looks rich. In the budget option, you can use plastic or MDF. Arches usually separate the hall from the kitchen or hallway, and are also used when combining an insulated loggia with a living room.

Trapeze

Not a very popular form for decorating a passage in a partition, especially in a small apartment. Sharp corners will make the room uncomfortable. The trapezoid fits a wide doorway in big apartment, A the best option facings - materials of light and warm shades. In a house with low ceilings, it is undesirable to make a narrow upper part of the trapezoid. A small jumper will visually lower the ceiling, reduce the room and give the interior a heavy look.

Asymmetrical shape

For achievement modern interior, the design of the room is often associated with the idea of arranging an asymmetric opening on interior partition. Hardware stores offer ready-made kits. When implementing your idea, a bizarre shape is created with a galvanized profile, and sheathed with drywall on top.

Asymmetric configuration involves the formation of smooth transitions in different parts designs. Avoid sharp corners. Finishing is usually done by painting or wallpapering.

Curtain decoration

Free passage between rooms without a sash is decorated with a screen or curtains. This is the most affordable way to decorate. Curtains made of fabric look cozy. Unusual interior create thread curtains. In the "eco" style, the room is decorated with bamboo curtains.

Materials for finishing the doorway

Plaster

Stucco, which is gradually losing popularity, is used as a budget option when you need to arrange a doorway for painting or wallpapering. The disadvantage of the method is the complexity of the work and a large amount of dirt. If the technology is violated, the formation of cracks and even shedding is possible. In stores, plaster is sold in the form of a mixture. The composition is different. The method of preparation and application to the wall depends on the type of plaster.

In outline Finishing work consist of the following steps:

Mix the solution in the container. The amount of one batch is calculated for half an hour of work.
The solution is thrown onto the surface of the wall, distributing it with a rule and a spatula.

When applying a thick layer of plaster, beacons are used. Guides will help to perfectly level the surface.
So that a thick layer of plaster does not crack, after applying 1 cm of mortar thickness, a reinforcing mesh is laid.

Decorative plaster can be painted. If this rough finish, then the surface is covered with textured putty.

Drywall

Finish the doorway with drywall in two cases:

when changing dimensions or shape;
if you just need to sheathe the opening instead of plaster for subsequent finishing.

To create figured openings, a galvanized profile is used. First, a metal structure of the required shape is assembled, and then it is sheathed with plasterboard.

Drywall can be used to correct large irregularities without changing the shape of the opening. The slopes are sewn up with sheets, and the corners are aligned with a profile.

After installation, the GKL surface is primed. Seams, protruding caps of the self-tapping screw and other defects are sealed with glue with a sickle lining. After the surface has dried, a layer of starting putty is applied. If it is intended not to wallpaper the opening, but to paint, another layer of finishing putty is applied. After drying, the surface is rubbed with a sanding net.

MDF panels

The advantage of finishing the MDF doorway is that there is no need to additionally prepare the surface by applying plaster or plasterboard sheathing. A wide selection of colors allows you to choose the material even under the old metal door. When sheathing is done door slope MDF panels, take into account the total thickness of the cladding. It should not interfere with the opening of the sash.

Installation is carried out on the frame. The structure is assembled from a metal profile or wooden slats. Attached to the wall with dowels and screws. Sheathing starts from the top crossbar, then goes to the side slopes. The joints at the corners are sealed with a decorative strip matched to the color of the panels.

Plastic

PVC door trim plastic panels similar to MDF board. However, the disadvantage of the material is its brittleness. The sheathed frame creates cells with voids between the slats. Near the door, someone will definitely press the slope with their hand and the lining will break through.

PVC panels are best glued with liquid nails. The color is selected with imitation of natural materials, most often wood. Nice classic white. Glue the panels on a perfectly flat surface, pre-finished with plaster or drywall. Before installation, the back of the plastic is rubbed with sandpaper. The roughness will provide better adhesion to the adhesive. The joints at the inner and outer corners are hidden by corners.

Laminate

To beautifully finish the door slope with a laminate with your own hands, you need to choose the right material. The color of the panels is selected so that it matches the shades of the doors, floor covering and even skirting boards. The slope, which stands out in contrasting colors, looks tasteless.

Fix the laminate in three ways:

On a perfectly flat surface, the panels are glued with liquid nails. The process is identical to the installation of plastic. Slopes are first plastered or sheathed with plasterboard. Laminate begin to glue on the top crossbar, then go to the sides.
Mounting on the frame allows you to lay thermal insulation in the cells. Simultaneously with the finishing, the opening is insulated.
Gluing with mounting foam is similar to using liquid nails. The difference is that there is no need for a perfectly flat base. The foam itself will even out the flaws when it swells.

Facing made of high-quality laminate will last up to 20 years.

Decorative rock

IN modern apartments fashionable decoration of the doorway with a decorative stone that does not differ appearance from natural material. Facing is best done with small elements with a weak relief. The design of doorways with a decorative stone with a deep texture inside the room creates the effect of a bulky structure.

A variety of material allows you to embody bold design ideas. Imitation looks good on the entrance door slope brickwork. Fans of the classics are offered elements with the texture of clinker tiles. To finish the corners of doorways, there are special corner plates that eliminate the need to cut stone.

To get a beautiful door slope, you need a flat surface. Elements are glued with liquid nails. The resulting seams are covered with grout.

Polyurethane

The elements used to frame the doorway made of polyurethane have completely replaced the gypsum moldings. Lightweight and durable material sticks well, does not break when dropped, and is resistant to moisture. The resulting seams are covered with putty, and after they dry, they are rubbed with sandpaper. Polyurethane stucco is suitable for rooms with high ceilings.

Dobory

To finish the doorway with extensions, they buy a kit. It consists of wooden or MDF planks. When assembled, a product is obtained that hides slopes protruding beyond door frame. The end result is a complete structure.

There are three types of extensions on the door slope:

simple;
with an edge at the end;
telescopic.

The first option is a plank with a raw edge. Tape-edged extensions allow you to hide the uneven edge in case of installation flaws. Telescopic boards are equipped with mounting grooves.

Tile

Finishing the door slope with tiles is justified if the material is in harmony with the design of the walls. The option is optimal for a bathroom or kitchen. Tiles are produced different shapes, which allows you to veneer not only rectangular areas, but also arches. For styling ceramic tiles you need a flat hard surface. Installation takes place on the adhesive composition. The joints are covered with decorative grout.

Gypsum

Making a doorway with gypsum stucco is rare. The material is quite brittle and heavy. In case of poor fastening, the falling element will break, and can also injure a person. To make it work beautiful decoration doorway, there should be a lot of plaster, and one style should be observed. This can only be achieved in a large spacious room with high ceilings.

Wallpaper

The easiest and oldest way is to glue the wallpaper on the slope. Moreover, the door leaf itself is often pasted over. Wallpapers are selected high-quality, resistant to abrasion and dampness. If you are finishing with photo wallpaper, the opening can be designed in the form of a living corner. To hide the doors from view, the slopes and canvases are pasted over with the wallpaper that was used for the walls. For contrasting highlighting, the sash is partially pasted over with patterns. Geometric shapes or pattern fragments are acceptable.

Doors and objects adjacent to them are considered the hallmark of the house. It is not worth saving on the design of this site, because it first of all catches the eye of guests.

It is enough to figure out what materials and how to ennoble the doorway after installing the metal entrance structure, so that this operation can be performed by yourself, saving on expensive services of craftsmen.

Face modern building or residential premises - the front door. The attractiveness of the external appearance of the building depends on the quality of its manufacture and installation. In most cases, the owners of apartments, offices, houses today install iron structures that are durable, reliable in operation, and easy to maintain. It is easy for the consumer to choose the ideal door in all respects. You can purchase a product of the most unpretentious design or a truly spectacular design with original decorative inserts and elements.

Plastering is the easiest way to finish door slopes

At the same time, regardless of the type of door, care should be taken to properly ennoble the opening after its installation. Only in this case the entrance to the house will look perfect. Finishing the doorway after installing one or another iron door often trusted by experts. But their services cost a lot of money. Any House master can avoid spending money. To do this, you just need to figure out how the ennoblement of the doorway is performed. Most often the layout entrance group carried out in the following ways:

1. Plastering with compositions based on sand and cement. Well known finish. It is optimal for decorating doors in household and utility buildings, baths, garages. If you use plaster mixtures to decorate the entrance to a dwelling, you need to additionally decorate the opening with suitable finishing materials with high decorative characteristics.
2. Improvement of slopes with wood-fiber (MDF) boards. These products are inexpensive, their use allows you to perform high-quality thermal insulation of the doorway and at the same time give it an aesthetic appearance.
3. Finishing with sheets of drywall (gypsum plasterboard). An affordable way to decorate a door. It is actively used by owners of commercial and residential premises.

Also, PVC panels and decorative stone are used for decoration.

Finishing with plaster - ready for the hard work?

If the repair measures in the room are not completed, you can finish the opening metal structure plaster mix. This work, let's say right away, requires a considerable amount of physical strength, as well as knowledge of the basic rules for the preparation and use of cement-sand compositions. The procedure is performed according to the following scheme:

Remove the old plaster mixture, thoroughly clean the opening from dirt and debris.
Apply the primer to the cleaned substrate. We recommend using for concrete and brick surfaces.
Place the beacons using the building level, and fix them with cement mortar.
Cover the door frame and areas around it with masking tape.
Install a reinforcing fiberglass mesh on the surface to be improved.
Add water to the plaster. It is better to purchase ready-made mixtures in a hardware store, not so much material is required, it makes no sense to mix sand and cement on your own. The required amount of liquid is indicated on the package with plaster.

Now proceed to the main stage of the operation. First, fill with plaster voids in the wall surface, large potholes. And then press the rule to the beacons and treat the surface with the composition as evenly as possible. You will have to wait until the mixture hardens, after which you should evaluate the results of your work. Often, bumps and small cracks appear on the plastered dried areas. Of course they need to be removed. This can be done by puttying (use finishing mixtures) and painting the leveled surface with a suitable color paint.

It takes 2-3 days for the plaster to dry completely. It is best to take acrylic paint, intended for decorating facades. She is not afraid low temperatures and moisture. The plastered and painted doorway visually looks very neat. It can then be further ennobled to your liking. finishing material. But do not forget that not every home craftsman will be able to beautifully finish the slopes with plaster. If you are not confident in your abilities, it is better to abandon this venture.

opening finishing front door wood fiber products is relatively simple. You will need to purchase three pieces of a bending decorative corner, platbands and MDF panels, about 9 meters of guide rails, dowels, self-tapping screws, liquid nails, a jigsaw, mounting foam, cement mortar, chisel, brace, chisel, tape measure, construction knife, simple pencil. Immediately select the type of finishing products. They are painted, laminated and veneered.

The first type of wood fiber panels is not suitable for finishing a metal structure (they have low strength). Laminated material is very beautiful in appearance, has good strength characteristics. Veneered products are considered the most reliable. Now we will describe in detail how to decorate the doorway of the front door with MDF panels as competently as possible. But first, let's give some important tips. Firstly, you need to very accurately determine the parameters of the door leaf (up to a millimeter). Secondly, the distance between the internal slopes of the structure is always taken less than the distance between the external ones. It is important. Thirdly, in relation to the level of the box, the slopes should be mounted 15–20 mm lower.

With the help of MDF panels, you can perform high-quality thermal insulation of the doorway and give it an aesthetic appearance.

The finishing process itself is as follows. Remove from slopes old paint, whitewash, plaster, seal the gaps between the door and the wall surface with foam, as well as the holes on the surface. After hardening, cut off excess mounting material with a construction knife. Treat the slopes with a primer solution, level them with cement mortar or plaster. Press (carefully) the mounting profile into the corners of the surface to be treated. These guides will become the basis for decorating the slopes.

Then cut out the top and two side elements from the MDF panels, focusing on the dimensions of the door. Treat the upper part of the slope with adhesive and press the prepared part to it. Do the same with the side elements. You need to press the panels hard enough and hold them until you feel that the glue has completely seized. After that, the gaps between the wall and the MDF products are closed with a plastic corner (such material is easy to find in any hardware store), which is fixed. The outer parts of the slopes can be ennobled with cashing (nailed with nails of suitable size) or with the same decorative corner.

Some self-taught masters do not pre-level the slopes. They simply nail the guide rails, and then mount MDF products on them. You can try to trim the front door opening in a similar way.

GKL are suitable for refining surfaces adjacent to doors from the side of the room (from the inside). In this case, wall drywall is used. Also prepare in advance a bucket for mixing plaster, a hammer, a tape measure, metal screws, 6x60 mm mushroom dowels, an adhesive for plasterboard, a perforator, plastic guide and starting profiles, a spatula, a screwdriver, stationery or special knife.

GKL are suitable for refining surfaces adjacent to doors from the side of the room (from the inside).

Algorithm for designing slopes from the inside:

1. Blow the mounting foam into the gaps and recesses on the surface. Cut off (after hardening) excess pieces with a knife or spatula.
2. Every 0.2 m, drill holes along the perimeter of the slopes with a puncher. Install dowels with screws. It is not necessary to tighten the hardware until it stops.
3. On three sides of the opening, measure the dimensions of the profile (starting). Mount the latter, fix it with metal screws.
4. Cut to the right size GKL into three parts. The width of the opening and the slope from above should be the same.
5. Prepare the adhesive according to the manufacturer's instructions. Stir the composition thoroughly (the presence of lumps in the composition is not allowed).
6. Lubricate the plasterboard strips and the areas where the dowels are mounted with glue.
7. Get the edge of the drywall strip into the guide from above, press it. Put spacers and wait 2-3 hours. During this time, the adhesive will seize tightly.

Then install the side strips in the same way. Be sure to check the accuracy of installation with a building level. Glue protruding onto the surface of the drywall should be wiped off with a rag without delay. If you leave it, the GKL is guaranteed to bend, and instead of a beautiful decorative finishes you will get unattractive curved slopes.

After completing all the described procedures, wait 12 hours and proceed to puttying the slopes. And then paint the opening in the desired color and enjoy the impeccable look of the door structure.

When repairing small apartments with narrow corridors, the door to the kitchen is increasingly being abandoned. An open entrance allows you to visually increase the space and save space. At the same time, there remains a partition that performs the functions of zoning.

In large private houses, a beautifully finished entrance to kitchen room from the hall or living room can be a whole work of art and interior decoration.

A wide span can be so functional.

After dismantling the door frame, the entrance from the corridor and other adjacent rooms, for example, the dining room or living room, can be issued various materials and different shapes. But at the same time, you need to remember a few important points.

It is forbidden:

Dismantle the door in the gasified kitchen. In this case, the claim for a fine may be from the gas service. Here the door is necessary for your own safety. gas stoves in the kitchen were common in old houses, in modern apartment buildings installed mainly electrical.
The expansion of the opening is a redevelopment, which entails changes in technical documentation. Be sure to coordinate such work with the BTI and other authorized services.

It should also be taken into account that the expansion of the entrance will require the installation of a more powerful hood. Especially if the kitchen opens into the living room. Otherwise, odors will freely spread throughout the apartment.

Open doorway - more good idea if there is a corridor between the kitchen and other rooms.

Entrance to the kitchen in Khrushchev

When entering the living room, you may need not only a powerful, but also a quieter hood so as not to interfere with the rest of the guests.

Examples of the most successful design options

In the decoration of an open opening, there are practically no restrictions on the choice of materials.

It can be a design under a stone, a brick.

You can finish the span with the same materials as the walls.

Can be used gypsum plaster to create a semblance of stucco.

It is necessary to take into account the possibility of caring for the surface, especially if the entrance is located next to the stove or sink.

Here are a few solutions on how to design a doorway without a door to the kitchen.

Trimmed rectangular opening

The most versatile and easiest option. After dismantling the door frame, the span to the kitchen is left the same shape.

Or they can be distinguished by plastic or wood paneling, revetted with wallpaper or decorative plaster. The choice of materials depends on the style of the interior.