Finishing stone doorways and corners. What is needed to finish the front door with a decorative stone, and how is it done? Natural decorative stone

There is an opinion that this method of designing openings is not suitable for residential premises. However, many experts recommend in some cases to trim the door jamb with a decorative stone. A detailed investigation with this technology leads to the thought: this type of framing allows you to realize original design ideas, and do it yourself.

The expediency of using decorative stone is determined on the spot; it depends on many factors - the overall interior, appearance installed in the doorway, its geometry and others. But in some cases, this material is simply irreplaceable.

For opening openings in large, spacious rooms. As an option - small, but with a minimum of furniture.
If the walls in the area of the door jamb have significant, difficult-to-remove defects, decorative rock hides them well.
In cases where this finishing material is integral part decor. For example, if the room is stylized antique.

There are two types of decorative stones on sale - natural and artificial. The former are used in the interior of residential premises not so often due to high cost and complexity of facing; they are characterized by high weight. And this is the load on the floor, and certain difficulties in fixing the samples on the jamb. The tiles are an imitation of natural analogues, moreover, they do not contain "chemistry" (or its concentration is negligible and is not taken into account). The raw material is crushed rocks; dyes are introduced into the mixture prepared for molding to give the desired shade. In order to reduce the weight of samples and increase fracture strength, some manufacturers add granular polymers.

Advantages of artificial stone

A variety of shapes, shades, textures of decorative plate products.

Ease of fastening. Imitation natural material characterized by the correct geometry, low weight and easy to cut, which facilitates the fitting of fragments when finishing door jambs.
Increased sample strength and abrasion resistance.
Inertness in relation to climatic factors and aggressive chemical compounds. Therefore, door decoration with decorative stone can be carried out in any room, regardless of its specifics. Even in those where there are sharp changes in humidity / temperature and their high / low values.
Convenience of choice. All artificial stones are different standard sizes and thickness. In addition, they have smooth edges, and this facilitates the calculation of the required number of products for finishing a specific area.
Consistency of color over time. The dye introduced at the stage of preparation of the mixture is evenly distributed over the entire structure of the material.
Decorative stone does not burn, does not block the base; it "breathes", which has a beneficial effect on the microclimate of the room.
Good maintainability of the jamb facing.

Features of choice

The color must contain at least two shades. The uniformity of color levels the naturalness of the decorative stone. It is immediately clear that this is just an imitation, and not the most successful one.
Facets. The front surface is without inclusions of large fractions, dye clots, stains and streaks. On the back side, the base should not be perfectly smooth - this will reduce the quality of the coupling of the decorative stone with the door jamb; or rough, or with notches (grooves).
sample edges. You need to decide on the type of seam between the stones. If it is chosen even along its entire length, then chips up to 2 mm are allowed. Some owners prefer to masonry with a visible seam; in this case, edge defects can be more significant - up to 6 mm.
surface finish level. First of all, this refers to the moisture protection of decorative stone. If there is no protective layer, it is better not to purchase; self-application, and high-quality - the process is complex, requires practical experience.

Basic rules for decorating jambs with stone

Symmetry. Both sides of the opening, regardless of whether there is a door frame in it or it is dismantled, are finished identically. Only this approach will ensure the completeness of the composition.
Height proportions. Priority - the bottom of the door. This applies not only to the vertical, but also to the horizontal axis. That is, the base of the opening, with any method of its design, should visually look more massive. In accordance with this, a jamb decoration scheme is drawn up, taking into account the dimensions of the acquired samples.
Combination of texture and seams. The task of the master working with artificial stone is to achieve complete naturalness of the cladding. Experts recommend laying out the “picture” on the floor before starting installation and evaluating the effect it gives. How to arrange products relative to each other, with what interval or offset - all such nuances are calculated in advance.
Correspondence to the jamb material. This must be considered even before purchasing decorative products. If the door frame, the slopes are well polished, varnished, then stones with a smooth front surface are used to decorate the opening. And it is advisable to mount textured samples around a raw jamb (made by yourself) or with a “rough” wood pattern.

Opening procedure

slope finishing front door decorative stone is produced by the same method as the interior. The only difference is in the choice of material - not every imitation is suitable for these purposes.

Foundation preparation

Removing excess - old paint, plaster, in some cases the door is also dismantled if the organization of an arched opening is expected. The task is to achieve a smooth and durable surface on which the tile will hold securely.
Marking the wall according to the prepared scheme for attaching stones.
Applying notches (grooves) to the base. This increases its adhesion to the lining.
Processing of all segments to be finished with a primer. The goal is the same; Plus, this composition prevents the absorption of moisture by the wall material.
After drying, it is desirable to apply concrete contact to the base. Such a tool will further increase the level of coupling, which means that the fixation of the stone will be as reliable as possible.

Door frame trim

Tiles are laid out on the floor according to the scheme. This will facilitate further installation and allow you to once again evaluate the correctness of the choice of the location of the fragments.

Removing the plinth. The stone is laid to the floor, and therefore the lower molding will be a hindrance; when the work is done, it is easy to return it to its place.
Definition of the horizon line. Task: to ensure that all seams are located in this plane. With the help of a level and a long rail, a line is drawn on the wall, which corresponds to the lower cut of the stones of the first row.

Tile fixing. Facing work always starts from the corner. To fix the samples, adhesives recommended by the manufacturer (tiled, "liquid nails") are used.

The nuances of the work depend on the design intent. In the process of finishing, stones will have to be cut, polished, bevelled; but these are details of no fundamental importance. If platbands are installed later, then indents are made for them.

Finishing the hutch

To give the stone more naturalness, it is advisable to spray the prepared composition over the entire area of the cladding, as well as on adjacent sections of the wall: acrylic lacquer + tinting paste. The mixture is diluted with water to the desired consistency and applied to the surface. Finding a recipe is easy.

Making a jamb with a decorative artificial stone does not require professional training. But if this option is unacceptable for some reason, you can use materials that successfully imitate such a finish. On the market in a large assortment of polymer texture panels, special wallpapers of the appropriate texture; working with them is much easier, as well as updating (reinstalling) corrupted samples. But still completely replace decorative tiles they are unable to. It is this design solution that can be considered the most preferable.

Exist various ways allowing you to create an attractive interior space. One of these is the implementation of the artificial stone trim of the doorway. This design allows you to give the room the spirit of antiquity and a special personality. Of course, it must be remembered that the coating must be reliable and durable.

Advantages of artificial stone for facing doorways

The decoration of the doorway with a decorative stone is carried out based on positive properties of this material, which are as follows:

For cladding, there is no need to perfectly prepare the surface. Small defects and errors are allowed. This greatly simplifies the workflow.
All processes are carried out independently. Therefore, significant savings can be made.
This finish allows you to give the openings a special unusualness. It must be taken into account that artificial material not inferior in appearance to natural, perfectly conveys texture and color.
Light weight, which reduces the load on the surface. Thus, it is possible to avoid the need for additional reinforcement.
Fire resistance and excellent thermal insulation qualities.
The presence of pores allows you to create a special microclimate in the room.
Ease of maintenance. Indeed, decorative items do not absorb dirt and dust, and are easy to clean.

Decorative stone is unpretentious in maintenance and has good performance properties.

On a note! Careful consideration should be given to the choice of material for work. It must be borne in mind that, for example, gypsum products are afraid of temperature extremes and high humidity.

Secrets of using material for finishing doorways

To finish with decorative stone doorways most qualitatively, some expert advice should be taken into account. They are as follows:

Facing rectangular openings is carried out taking into account the fact that the lower part should be slightly wider than the upper. This allows you to visually create a more natural composition. Thus, it is possible to achieve a smooth transition to another finishing material.
To get a beautiful arched opening, it is trimmed exclusively according to a pattern that should repeat the bends of the existing structure. This technique allows you to highlight the shape of the arch against the background of the wall.

Decoration with a decorative stone allows you to highlight the arched opening against the background of the wall

It is necessary to clad openings that do not have installed door panels on both sides, taking into account the slopes. This will create a smooth transition.
For work in small rooms, for example, hallways, additional stone framing of other structures (shelves, mirrors) should be performed. This method will create the completeness of the composition, as well as emphasize a single design intent.
To achieve the best naturalness, the finishing of doorways is carried out with a little carelessness. Namely, uneven edges are created, different sizes of an artificial product are used.

Knowledge of the features of working with decorative stone allows you to create a unique interior

Of course, such tips allow you to perform the work with the highest quality, but it must be borne in mind that only by using your imagination, you can get complete individuality.

Installation work

It should be borne in mind that stone doors, or rather, their surrounding areas, can turn out to be beautiful and durable only when all work is carried out completely according to the rules. The whole process can be divided into several stages.

Preparation

All work starts with pre-training. Indeed, the material does not imply perfect surface leveling, but a number of procedures must be followed:

The old coating (paint, wallpaper) is completely removed. It should be borne in mind that in order to obtain a uniform surface, sometimes it is necessary to remove part of the plaster. It depends on the thickness of the selected product.
The primer is applied. For work, a composition with a deep penetrating effect is used. It will allow you to create the best adhesion.
The stone is preliminarily laid out on the floor. The desired drawing scheme is drawn up. This technology will avoid problems with docking.
If there is not enough experience, then preliminary markup is performed.

Preparatory work before laying decorative stone

Of course, if required, alignment is performed. It is advisable to obtain a coating that will be sufficiently reliable for further work.

On a note! The stone is laid on the sections of the doorway using adhesive composition. For this, a solution is used, which is prepared in small portions directly at the time of facing. It should be borne in mind that the mixture quickly loses its qualities and becomes unusable.

Laying decorative stone on the adhesive solution

Seam finishing

The suture method is great for overlaying a door with a stone. This option involves the implementation of the following technology:

The prepared mixture is applied to the selected area. For this, a notched trowel is used, which distributes the composition well over the surface.
Facing starts from the bottom corner of the opening. Although some finishers advise to start laying from above, in this case, changes must be made so that the stone does not slide down.
The fragment is placed in place and pressed down. Subsequent elements are mounted after the seam is created. Its size is determined solely by the desired visual effect. As spacers, you can use pieces of plywood, MDF, plastic.

The use of spacers allows you to create a beautiful and even seam

The most attention should be paid to the corners. Especially when the general finishing of openings (walls and slopes) is performed. There are two options for their formation:
- Direct styling. Facing is done by laying fragments perpendicular to each other. To do this, cut off the protruding excess and process the edges (sand and tint).
- Cut at a 45 degree angle. This is a very complex technology. It consists in the fact that each fragment is first adjusted, and then their edges are cut at an angle.
All fragments are laid out according to the existing plan.
After the material has dried, it is necessary to do the seams. For their sealing, a jointing composition is used, which is prepared in the right amount.

The most successful option looks in which the color of the joints is chosen in a different tone. A plastic bag is used to apply the composition. It is filled with a prepared solution, one corner is cut off. The mixture is squeezed out in the right amount.

On a note! To get a rough surface closer to natural look using a hard bristled brush.

Seam filling

Seamless laying

This option is used when it is necessary to form a uniform, monolithic surface. This technology allows you to achieve an excellent effect. The work is done fairly quickly, but requires special care. General order is:

Adhesive is applied to the wrong side artificial stone.
It is necessary to exclude the appearance of surpluses. But, if this happens, then they are immediately removed.
Finishing is done from the bottom up or from the top down. If the second option is used, then a reinforcing profile should be additionally installed, which will prevent fragments from slipping. In addition, it is necessary to wait for some time, which will allow the surfaces to adhere.

The final stage is that the surface is coated with protective compounds. This is especially important when finishing is done near the front door.

Finishing the doorway is one of the important elements of the interior of the house. Many owners are trying to highlight this area in a special way. One of original ways- the use of decorative stone. This material creates comfort in the house, and it also has a positive effect on the surface of the walls - it protects them from mechanical damage and prevents the penetration of other irritants. Decorating a doorway with a decorative stone is lovely way stand out.

Stone Benefits

Both artificial and natural stone are used for decoration. But not so long ago, the second option has become less popular for the reasons that it is much more expensive and heavier. So, let's look at the advantages of artificial stone.

A light weight. Using this stone, there is no need to additionally strengthen the foundation and use an expensive adhesive layer;
Long service life due to its moisture resistance, resistance to dust and dirt. Thanks to these qualities, the material is able to serve for more than a dozen years;
The material is created on the basis of non-toxic substances, therefore it is completely environmentally friendly. Although it is artificial, it is in no way inferior to natural materials;
The price of finishing material pleases. Given the fact that the stone is made on the basis of concrete, its price is not high;
Installation is very simple and fast. For installation, you do not need to purchase additional mounting fixtures and there is no need to hire craftsmen. Decorating the doorway with a decorative stone is do-it-yourself;
The range of materials is simply amazing. Probably the biggest problem is the choice of material. No other finishing material has such a quantity of texture and shades;
Resistant to temperature extremes. He is not afraid of indicators from -40 to +70 degrees. Having such abilities, decorative stone is very often used for facing fireplaces and exterior surfaces of house walls.

Finish options

There are many options for decorating a doorway with a decorative stone. The material can decorate both the opening itself and the space around it. As a rule, tiles are used to finish the door. At the entrance to a house or apartment, the walls around the door can be made the same tone as the door, and the interior walls can be decorated with the color of the hallway. The use of tiles for decorative stone will imitate slate or brick. If you use large forms, then it is quite possible to create a doorway in the form of a carved passage in the rock.

Openings in private houses are best lined with large stones.. A non-standard opening looks very individual, for which a chipped material format is used. If you want to give the house a little medieval, then the best material not find.

Stone selection

Given the great demand for material, today there are several types of decorative stone:

On concrete. This type consists of several materials and is considered the most common. For its production, cement, sand, reinforcing additives, dyes, and fillers are used.
Porcelain tile. Mainly used for interior decoration walls. It consists of: clay, feldspar, minerals and coloring pigments. To create strength and stability, several clay options are used to create it. As a result, all this mixture is subjected to pressing, and after firing. The opinion that porcelain stoneware is similar to stone is not true. Rather, it looks like glass rock with different colors. Its qualities are very high: it is able to withstand mechanical loads and temperature changes. It is not recommended to use it for kitchen apron – greasy spots it is very difficult to wash it off.
Conglomerates. It has high strength and reliability, very often used for decoration internal walls premises. It consists of marble and granite, limestone chips, sand and dyes. The appearance is very much like a natural agglomerate. It can also be used for exterior walls, it has high strength and endurance. Not afraid of frost high temperatures. Relatively light weight allows for installation work on one's own.
Acrylic. This type of stone can be called the most practical. It is often used for interior wall decoration. Since it has excellent technical performance. Its structure allows it to withstand various mechanical loads, and it does not deform. Its surface can be cleaned with a clean rag without using additional detergents. Lightweight material that works well. Does not include harmful substances, so it can be safely used for lining bedrooms and children's rooms.
Quartz. Finishing with quartz material is not particularly in demand, but it is impossible not to mention it. The stone has good performance: both resistance and durability. For its processing, a diamond-coated disc is used.
Gypsum. The most popular type, the demand for it is growing every year. Its light weight and rather attractive appearance make it a leader.

Advantages of decorative stone based on gypsum:

Moisture resistance. There is an opinion that this species is damaged by moisture. This is not so, it is treated with a special protective layer that prevents the penetration of moisture;
Not combustible, does not deform under loads;
Easy to install, light weight;
The appearance resembles sandstone;
It can be made by hand. To do this, you need to have a gypsum dough, molds, pigments for coloring and a lubricant.

To prepare it, you need to knead the dough from gypsum, then add dyes. After that, fill in the forms. After waiting for complete solidification (24 hours), it must be carefully removed from the mold and lubricated with a moisture-resistant substance.

Finishing instructions

Decorating a doorway with a decorative stone is quite simple, but it requires pre-prepared surfaces, materials and tools. Preparatory work involves leveling the surface, since the stone should only lie on a flat wall. To do this, you can use not only plaster, but also drywall. Here everyone can decide for themselves what the finances are enough for.
So, you will need:

Cement mortar or special glue;
Level;
Spatulas.

To perform a high-quality finish, first mark the surface with respect to the future layout of the stone on the wall.

Simply put, make a plan for the application and placement of each tile. This will help not only to save time, but also to understand how the future updated doorway will look like. If there is glue - good, you can apply it. If not, prepare a solution. For him you need: cement, sand and water. The solution is made according to the ratio: 1 bucket of cement to three sand. Add water during kneading. Use a mixer or drill to stir.

Glue or mortar is applied to the surface and cools slightly (about five seconds). After that, a decorative stone is applied. On a stone (his inside) also need to apply a solution. The tile must be pressed tightly against the wall, and each subsequent tile must be adjusted to the level. So, element by element. The ease of installation lies in the fact that for its installation it is not necessary to use special beacons, as for tiles. After finishing, the joints or chips that could have formed during the installation process can be lubricated with a special lubricant selected for the main color.

Finishing with decorative stones will brighten up not only the entrance to the house, but also give the whole house a novelty and presentability. Make your doorway stand out. Good luck in your endeavors.

Video "Finishing the doorway with stone"

In the video, the specialist shows interesting option finishing the doorway with stone.

Very important point for any room - how it is finished doorway. It matters how decorative element in addition, stone finishing doorway usually - a very serious addition to the overall design. An artificial stone http://ideal-stone.kz/ is perfect, here it is sold at competitive prices.

Today, “stone-like” finishing of doorways is often performed. However, here it is necessary to focus on the style in which the room is decorated.

The use of decorative stone in interiors

For decoration, stone is often chosen when the room is decorated in country style, or a certain Gothic vector is set in the room. Classic style in the interior too good foundation for the use of stone. What materials are usually chosen if you need to upholster a doorway?

Decorative stone;
natural material;
Some other option that very similarly imitates a real stone texture.

To determine what type of material should be used in a particular room, the shape of the doorway is usually evaluated - without this it is impossible.

And doorways can be:

arched;
Rectangular;
Square.

Someone will say that finishing a doorway with a stone is not an easy task (especially if you have to work with an arched type). But here everything is exactly the same as with any other forms. But in the end, the arch, which was sheathed with stone, looks more original and aesthetically pleasing. By the way, it is also often used in outdoor facing works - we wrote about this earlier.

Finishing door slopes with natural stone

At the moment in finishing works ah natural stone is used often - this solution is popular. The fact is that the material of natural origin creates a rich appearance in the room. In addition, it is worth remembering about technical specifications properties of natural stone.

Let's talk about them in more detail now.:

Natural stone is durable and practical;
Installation work is carried out easily;
If necessary, such a stone can be easily cleaned;
The level of moisture resistance is high;
It is not combustible, does not fade in the sun;
Absolutely safe in the ecological plan;
Climatic vagaries, certain natural factors - natural stone is not afraid of all this.

Even our distant ancestors drew attention to the positive properties of natural stone. At the same time, the material began to be used in construction works ah active - strength affected the distribution.

But construction didn't end there. in the decoration, this material also found its application.

The fact is that the interiors, the cladding of which is made of natural stone, look very dignified (and the decoration of the doorway with stone is an art at all);
To make sure of all of the above, pay attention to the photographs, where you can see the premises, which the owners decided to decorate with elements of natural origin;
Today, the following types of stone are often used in decoration: shell, sandstone, marble, granite - and these are far from all the stones that people actively use.

Decorative stone: properties and applications for slopes

What are the features of such an offer? in detail:

Relatively not long ago, such a finishing material as a decorative stone appeared on the market. However, despite his youth, he already has a very positive reputation. The appearance of such a material is exactly the same as that of a natural counterpart. The main difference: cost - an artificial stone is cheaper than a real one by an order of magnitude;
Because of this, decorative stone is often chosen for facing rooms - for the sake of economy. Finishing a decorative stone doorway can also be done - many people practice this and are satisfied with the results.

For the production of decorative stone, various synthetic substances are usually used, but it is still called completely safe in environmental terms. You can safely use this stone in decoration, it is harmless both for people and for environment generally.

Properties of artificial stone

Like its natural counterpart, it is durable and practical;
It is not combustible, is not afraid of temperature fluctuations;
He is not afraid of certain climatic vagaries;
High level of moisture resistance;
Does not lose the original light, from sun rays does not fade for a long time.

Applying decorative stone in the decoration of the doorway is the right decision. So you get a really worthy, high-quality repair for a long time. This finishing material is quite durable, it will certainly cope with various physical and mechanical stresses - do not even doubt it.

Finishing work: we use natural stone

In order for the stone finish of the doorway to be done at the proper level, you first need to prepare. TO preparatory work can be attributed to the alignment of the surface on which the material is planned to be applied.

Keep in mind: it is imperative to level the surface where you are going to mount natural stone. Only with this approach can one count on the fact that the finish will be securely fixed on the surface.

Alignment can be done in different ways - there are enough ways to interact with slopes. A lot depends on the shape of the doorway, what size it is.

Everything will be said in order.:

In case your doorway is square or rectangular shape, plaster or drywall is perfect for leveling;
And if the design is arched, it is better to use strictly plaster. However, the use of drywall is also possible here - no one denies this.

How to level the slope surface

Plaster is ideal for to level the surface quickly and very easily. For this, it is applied:

Plaster starting;
Finishing composition;
You will also need a pair of spatulas (large and small);
Construction level;
Sandpaper.

To finish the door slope - evaluate it in advance general state. In the case when some defects are revealed on the surface, it will be necessary to apply the starting plaster - in a thick layer.

These mixtures are on sale, but they mainly come in dry form. There will be no problems with cooking - just dilute the composition in accordance with the instructions that are published on the package. For dilution, you will need to add some liquid.

What else should you know? Everything looks like this:

The composition should be applied in small layers - so that each layer dries thoroughly before the next layer is applied;
After application, each is processed with sandpaper. Such manipulations are needed in order to remove all irregularities from the slope surface - which could occur there while you are applying the starting plaster in several layers;
A lot depends here on how uneven the slope surface is initially;
When you are done with the application of the starting plaster (as well as with the processing of the layers with sandpaper), it's time to take on the finishing plaster. This layer is required in order to even out all the defects and errors on the starting layer;
Finishing plaster is also applied not in one layer, but in several. Each layer after application must be treated with sandpaper - in a word, everything is the same here as when applying the starting plaster.

Please note: when finishing the doorway, it will be possible to use several finishing materials here at once. For example, they are perfectly combined with each other: natural stone and decorative plaster.

The main thing in such work is to choose the right color scheme. And when the decoration is finished, the interior will acquire a very solid, noble appearance. You will always be pleased to be in such a room - as well as guests.

Drywall instead of plaster (levelling)

Very easy to align different surfaces using drywall sheets - so many people choose this option. What is also nice, after the work you will not have construction debris (when using plaster, it is usually in excess).

What does the whole process look like? It's like that:

It is customary to fix drywall on a frame, which is prepared in advance. The easiest way to make this design is from metal - special profiles are sold in hardware stores. Some elements here are carriers, others are auxiliary. The result is a high-quality crate, on which you can safely attach the material;
There are a few things you need to know before using drywall. The fact is that this material can hide a little usable space - precisely because of the presence of a frame made of profiles;
From the wall surface, the height of such a frame can be 50-100 mm (everything here is determined by what irregularities are on the surface);
The conclusion is simple: drywall should be used when finishing the doorway in the case when the room and other planes will be aligned in the same way.

GKL sheets are installed using:

Self-tapping screws and metal profiles;
Dowels may come in handy (using them to fix the frame on the surface is the easiest way);
The frame elements are most quickly fastened with a screwdriver (although you can also do this work with your hands);
Remember that you can easily fix drywall with your own hands - it is not necessary to hire specialists for this - after that your doorway will be perfectly prepared. Finishing with stone then also will not be a problem. And if you have any questions: you can always watch a training video on fasteners.

We produce finishing

Among the disadvantages of natural stone, it can be noted that it weighs not so little (just an order of magnitude more than artificial counterparts).

You can mount on the surface with a cement mortar - or you can use a special adhesive designed specifically for such a load.

What is required for a quality installation?? The list looks like this:

You can not do without natural stone (well, this is understandable);
Solution or glue (they are mentioned in the paragraph above);
Construction grid;
Wire fittings;
Putty knife;
Building level.

How exactly is the installation of stone on the doorway? In detail it will be like this:

Wire reinforcement is first fixed to the surface of the wall - here you need a cement mortar;
Now you can apply a plaster layer on it;
Next, a construction mesh is laid - it is needed in order to strengthen the finishing material on the surface;
Natural stone is mounted on the wall - cement mortar is used for this, you can also choose specialized glue.

Sometimes professionals do this: PVA glue is added to the composition of the cement mortar - due to this, the strength of the latter increases significantly, the result will be of better quality.

What is described above regarding the installation of natural stone on the doorway is said precisely about the surface that was previously leveled with drywall. And if defects were eliminated by plastering, then all these actions are not even necessary to perform.

When the doorway, which is planned to be finished with stone, is made in the form of an arch, everything will be very original here. The bottom line is that to obtain an exquisite result, the master can use several varieties at once. natural material- moreover, choose the size of different elements. The interior will only benefit from such a decision - there is no doubt about it.

However, if the opening is straight, here you can also use elements of different sizes, varieties: fortunately, natural stone itself gives the masters such an opportunity. Only your imagination can limit the funds that you decide to use as part of the decoration - remember this.

We use decorative stone for finishing the opening

How does artificial decorative stone differ from natural? Affordable cost, light weight. Due to these advantages, you can use this material for the benefit of your home - to create in a particular room a really such design that can be called original.

In order to carefully fix the decorative stone on the surface of the doorway, it will be necessary to level the surface. Drywall or plaster is used here - this is described in detail above.

How is the installation of decorative stone carried out? Everything is as follows:

Finishing material is mounted quite simply. Since it is not heavy, it is easy to mount it on the surface of the doorway - the wire reinforcement mesh will definitely not come in handy here;
However, it will be necessary to use all the same materials and tools that were needed when fixing natural stone;
First, a building mesh is placed on the surface of the opening - it is fixed cement mortar on a surface. Here you can immediately install a decorative stone. However, special glue also gives good results when fastening;
You can install the decorative stone in any order. To get variety, often several options for finishing material are used at once within the same doorway;
The room becomes more original, as well as the door structure.

Results:

Recently, doorways are increasingly lined with stone - and the popularity of this direction is only increasing. This can be explained not only by the styles that are actively used in interior design. Stone is practical, durable, it is really a worthy finishing material, for which it is highly appreciated.

Sections of the article:

The traditional option for finishing the doorway is the installation of a structure that completely fills the space between the partitions. However, it is not always possible to perform such an installation. This is due to the fact that often door blocks are several of an existing doorway. In this case, door trim involves the use of other solutions, which will be discussed below.

Finishing the doorway: extensions and panel materials

The classic option for finishing the entrance doorway is the use of extensions and other panels. The best and most simple option is the use of extensions. These products have a small width, which allows them to be successfully used for finishing openings. The use of all kinds of decorative panels is suitable for openings without doors, as well as for doorways with installed door blocks. Both of these options deserve to be considered in more detail.

The implementation of finishing doors with extensions is the simplest and most fast way performing such work. Dobors are made from various sheet materials. Often, MDF, plywood or natural wood is used for these purposes, which happens much less often. The owner of the dwelling can independently make an additional bar.

To do this, you need a certain tool and several sheets of material. With this option, it is possible to decorate the extensions at your discretion. All you need to do is cut the slats to the desired length and width and decorate according to your own preferences. Mounting of extensions is also quite simple.

Another way to finish the entrance doorways is to use MDF or other panels. This door design is very similar to that solution with the help of extensions. The main differences are in the original characteristics of MDF panels. So, additional slats can change the aesthetic perception of the doorway slightly. At the same time, MDF panels significantly change the appearance of the front door. In addition, they can be used to decorate a doorway of almost any width. As a rule, MDF panels are formed by using several separate planks, similar to the installation of laminate boards. It would be nice to say that the laminate itself can also be used to finish the doorway.

At the moment, there are two technologies for finishing doors with extensions and decorative panels. The first method is the fixation of products using polyurethane foam with slight pressure during the polymerization of the material. The second option involves the creation of a frame, on which extensions or panels are then attached. The second technology is preferable for finishing fairly wide doorways. As an example, we can note the vestibule between two front doors in a private house. The thickness of the outer walls in such buildings often reaches 800 mm.

How to trim a doorway with drywall

One of the most popular materials of the last decade is drywall. Today it is difficult to imagine a house, apartment or office in which it would not be used. Doorways are no exception, for the decoration of which this truly universal construction material. By the way, it will be noted that with the help of drywall, you can both level old surfaces and create new ones. This quality of the material allows it to be used for decorating doorways of entrance doors. In addition, with the help of drywall, you can trim sections of almost any width. Perhaps the only drawback of this cladding option is the need for additional decoration of the material after its installation. Drywall is a representative of draft materials, the main function of which is to provide the ability to perform "finishing" construction work on a flat surface. Making doors in this way is a good option.

The fixing of drywall segments on the slopes of the doorway is carried out using a special gypsum-based adhesive. In other words, the finishing material is glued to the end parts of the walls, which allows you to effectively hide the traces of the mounting foam used when installing the door block. Then the plasterboard slopes must be puttied together with the walls and painted with a finishing coat to match the interior of the room. It will be by the way to say that for the design of slopes from drywall, you can use not only paint, but also wallpaper, natural and artificial stone or other decorative materials.

One of the main advantages of using drywall for finishing doors is precisely the wide range of options for choosing the final finishing coating. So, you can use the usual water-based paint, wallpaper, tiles, decorative plastering. It will be by the way to say that the tile can be used without creating a hypocarton base. True, this is possible only if there is no shingles on the walls.

However, do not forget that drywall must effectively resist moisture, which will inevitably accumulate during the condensation of steam in the air during winter period. In addition, you will need to securely protect the door during plasterboard finishing work. To avoid damage decorative coating the door must be covered with masking tape. This is to protect door block from adhesives, putty and other substances that can damage the surface of the structure.

Decorative finishing of doorways with stone

The use of natural or artificial stone for decorating doorways is good decision, but it is not always appropriate. The fact is that these materials are not suitable for all interiors. They will look more organic in those living quarters that are made in the old style. Of course, in such apartments and houses, stone simply has no competitors. Finishing entrance doors with decorative stone has a number of obvious advantages, and the appearance of such a solution looks great, as you can see from the photo in our article.

The most important advantage of these materials is their neutral structure. This means that both artificial and natural stone in no way affect the microclimate of the room. Both materials have excellent moisture resistance characteristics, which is very important when facing the slopes of entrance doors, which emit condensate in the cold season.

Another important advantage of decorating doors with decorative stone is durability. It is known that the glue used to fix the material will disintegrate much faster than the stone itself. In this regard, natural stone is somewhat preferable to artificial. But the second one can last several decades.
Also, the advantages of using stone include a simple laying technology, which does not require the obligatory observance of even seams. This method of cladding is able to perform even a person far from the construction and repair sphere. In addition, it is worth emphasizing the wide range of this material. This is especially true for artificial stone. A variety of natural stone products is achieved thanks to different ways cutting. Using this technique allows you to create hundreds of different patterns and ornaments, even if you use one type of stone, for example, sandstone.

It will be by the way to say that it is this variety that is usually used when facing entrance doorways. natural stone. There is such a type of this material, which among consumers received the winged name "noodles". This variety is a stone cut into thin strips of various lengths.

It should be emphasized that the decoration of entrance doors with artificial or natural stone is an expensive pleasure. But, this "flaw" is fully compensated by the unique appearance of the cladding, as can be seen in the photo. In addition, this solution is highly reliable. Many experts and designers emphasize that finishing slopes with artificial stone is ideal solution due to a number of advantages of this particular material. For example, there is a spectacular appearance, cladding strength and durability, ease of stone care, as well as the ability to restore decorative trim in case of damage to its individual elements.

In addition, one can also recall the excellent organic combination of this material with other types of cladding. Often, medium-sized stones are used to finish the doorway with artificial stone in apartments and houses. This allows you not to load the interior with large forms. It would be nice to say that many designers use one interesting trick to make the environment natural. The outer edge of the artificial stone trim is deliberately uneven, but even edges are almost never used.

In cases where it is necessary to decorate an arched opening with a stone, the material is laid out in the upper part along the perimeter, which allows you to emphasize the shape and make the design noticeable against the background of the rest of the wall. An important nuance laying decorative stone cladding is the finishing material of the slopes themselves. This will allow you to stay within the chosen design solution and maintain harmony in the interior.

Other finishing methods

Do-it-yourself door finishing, in addition to the methods already listed, is also carried out by a number of other methods, which are a good and often cheaper alternative. Among them are, for example, cladding tiles. True, it should be emphasized that most often this material is used for finishing slopes in sanitary facilities and bathrooms. It will be by the way to say that when tiling a doorway, you can use the remnants of the material after completing the main work on the walls. This saves cash and reduce the overall cost of repairs.

In addition, it is possible to veneer the slopes of the doorway using laminated chipboard. This is a great option, the implementation technology of which is quite simple and easy. All you need to do is fix the material with mounting foam, and then fix the trim. In addition, you can use such a traditional way of finishing doors as decorating with natural wood. This material has been used for such work for many centuries, and perhaps millennia. The main advantage of a tree is its natural natural attractiveness. In addition, the tree is environmentally friendly and easy to process. It is these characteristics that have made it the most attractive material throughout human history.

The only negative natural wood is his fastidiousness. Thus, the condition and service life of this material is highly dependent on temperature regime and environmental humidity. It is also worth emphasizing that wood processing will require a special professional carpentry tool. Otherwise, it will not work to decorate the entrance doorway with the help of a tree.

In conclusion, I would like to note that there are many options for decorating the doorway of the front door. The consumer only needs to choose the most suitable solution for him in terms of interior, purpose of the premises and budget for the work. Before finishing the doors with your own hands, you should carefully analyze the options offered. Also, do not forget about the choice of color for the decorative cladding of the slopes. After all, a poorly chosen shade can spoil the impression of the room as a whole.