Do-it-yourself bath: interior decoration. What is the decoration of the bath inside, photo examples Do-it-yourself bath decoration

Have you tried and built a beautiful hut-steam room? Now we need to finish the bath from the inside, which requires no less attention than outdoor work. High humidity and high temperatures put forward special requirements for materials, because not all of them are able to withstand difficult operating conditions. It depends on the choice of sheathing how long the structure will last, how comfortable the procedures will be. Various rooms in the bath require their own approach to finishing, but the most difficult is the finishing of the steam room in the bath.

The design of the steam room in the bath Source et.aviarydecor.com

What material is suitable for a steam room

For internal works There are many finishing materials. To make it easier for you to choose what will be the finishing of the steam room in the bath, photos and pictures ready-made solutions every designer has. It is worth recalling that even if you yourself made a choice, it is better to coordinate it with a specialist, because not all materials are suitable for installation inside the hottest room.

Given the specific operating conditions, the corresponding requirements are imposed on the finish:

moisture resistance;

heat resistance;

durability;

hygiene;

environmental friendliness.

Important! For the interior decoration of the bath, you should choose natural materials.

Plastic deforms when the temperature rises, begins to emit an unpleasant odor, and ordinary tiles crack after heating. Therefore, the use of such a finish is unacceptable in the steam room.

The best option is wood. The structure of the finish depends on financial capabilities. For example, lining is cheaper than timber, it is chosen if it is necessary to meet a certain budget. Basically, the owners of baths prefer hardwood. Below is an example of what it might look like interior decoration baths, photo of the classic version.

High-quality wood for the interior decoration of the bath Source stroy-block.com.ua

There is an opinion that it is not necessary to sheathe inner part steamed coniferous wood, because when the temperature rises, it releases resin. But this statement is debatable, because the resin has a beneficial effect on health, cleanses the respiratory tract, and strengthens the heart.

Whether or not to sheathe the interior with coniferous wood, it's up to you - maybe someone from the house has an unpleasant smell of needles or vice versa ...

If lining was nevertheless chosen for lining the bath, then it should be High Quality. Particular attention must be paid to the external processing of the material - there should be no chips, knots, cracks on its surface. Lining should not deform: swell when heated or shrink at normal temperature.

If for some reason wood does not suit you as a material for the interior decoration of a steam room, you can give preference to heat-resistant tiles, they have proven themselves well with significant temperature changes.

Video description

How the ceiling is insulated and the walls are finished in the bath is shown in the video:

Ceiling protection

Before finishing, the ceiling should be protected from hot steam. To do this, use aluminum foil or a building membrane.

Important! Do not use foil with glued mineral wool or expanded polypropylene. When heated, these materials release toxic substances.

Protecting the ceiling in the bath with aluminum foil Source ko.aviarydecor.com

The use of lining - rational or not

Definitely yes! Lining made of linden, aspen, cedar, abasha has become popular due to its properties. It tolerates temperature changes, high humidity, is aesthetic, does not absorb moisture. The lining of the lining has a low thermal conductivity - it does not heat up, but transfers heat into the air.

The lining for the bath is not varnished, antiseptic, paint, it is used in its natural form.

On our website you can find contacts construction companies, which offer the service of building a bath. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

Preparing the walls for decoration

Starting to finish the walls, they solve the issue of insulation and waterproofing. Without such measures, the bath will not last long, and healing procedures will be reduced to simple hygiene. For insulation, the walls are covered with mineral or basalt wool. The second is more resistant to high temperatures, so it lasts longer.

Wall insulation in the steam room with mineral wool Source hvylya.net

Masters consider cork to be the best thermal insulator for walls in a bath. This agglomerate does not burn, does not rot, is resistant to fungi and mold.

Crate - to do or not to do

Masters prefer to install the crate and attach the interior trim to it. The popular base size is 50x50, less often they make 70x70. The step is not a standard and varies depending on the size of the blocks being reinforced.

The crate is made of wood, less often of metal. Given the operating conditions, the metal must be treated with moisture-resistant compounds. Lining or logs are fixed with screws, nails. They must be copper or brass. The installation of the base is done perpendicular to the skin.

Lathing of walls in the steam room for lining source seattlehelpers.org

Stages of lining

Perimeter wall and ceiling fix the beam. Fasteners should be every 80–100 cm.

Cut pieces of insulating wool placed between the tree without ramming.

Above cover with a waterproofing. The joints are sealed with aluminum tape, paying special attention to the corners.

Equip ventilation. To do this, fill the remote rail. It will provide a small gap (2–3 cm) through which air will be vented.

Do separate upholstery doors and windows.

Fasten the lining. You need to start from the corner, fixing each part vertically. This position will ensure free flow of water. If a horizontal arrangement of blocks is planned, make sure that the spikes are at the top. This will protect the lock from moisture.

Lining, located in the corners or near the walls, cut off before right size . It is especially important to cut the corner block correctly. It is necessary to accurately calculate the angle of inclination so that the neighboring block is correctly fixed.

Furnace insulation with metal sheet Source interistroy.ru

metal- stainless steel or profile iron is mounted on the wall behind the stove;

Red brick- laid between the wall and the fire;

tiles resistant to high temperature (kaolin);

minerite– a heat-resistant board made of cement and special components.

Video description

Step-by-step installation of lining in the steam room, see the video:

We make the floor in the steam room

Not only comfort, but also safety depends on the choice of raw materials for the floor. Moisture on smooth tiles or linoleum can lead to falls and injury. Installation of such materials will turn the floor into a skating rink. In addition, linoleum, when heated, emits an unpleasant odor containing substances harmful to health.

The optimal choice of floor for the steam room is wood. It does not require special coating, moreover, with such a design, the room will be designed in the same style. It is worth noting that the wooden floor in the bath is not made of oak. This wood becomes stronger when wet, but at the same time its surface begins to slide.

Good for concrete. A floor made of such material will be strong and durable. Tiles are laid on top of it, but the surface structure of such a coating is important. It should not be glossy, a pronounced relief is needed. The floor is laid at a slight slope to the water drain.

Laying tiles on the floor in the bath source seattlehelpers.org

Laying tiles is carried out from the corner, installing crosses between the blocks, tapping with a mounting hammer. After 2-3 days, the seams between the tiles are overwritten. Wooden gratings are placed on top, which allow you not to step on the cold floor and provide additional safety in case of possible slipping.

And now the shelves

Very important point- shelves in the bath. Since they are supposed to be constant tactile contact, these elements are subject to increased requirements:

they should not get very hot;

better if cool down slowly;

must be environmentally friendly;

don't slip and not be very rough;

not have external damage;

easy to wash.

Again, a tree is most well suited for this purpose. Thoroughly cleaned, without knots and notches, it has served people in the bath and steam room for centuries. Shelves should not have sharp corners that can cause injury. They are not made solid, leaving between wooden planks small distance.

We equip the dressing room

The main function of the dressing room is to keep warm. The temperature in the room is not high, so for decorating walls in traditional style good use of coniferous trees.

Design of the dressing room and rest room "under the tree" Source koon.ru

The interior decoration of the bath from a log creates an atmosphere of antiquity, ancient fairy tales. A light aroma created by pine, fir, spruce is appropriate here. The wood of these species resists fungus and mold well. It does not crack after drying, durable. When heated, fir almost does not emit resin.

If hardwoods are preferred, experts advise decorating the room with birch. The lining can be laid out not only in even rows, but also in a pattern. It is important that the walls in the room are covered with one type of wood.

Bathroom and washroom

These rooms do not have very high temperatures, although the humidity is as high as in a steam room. The choice of finishes in the bathroom and washing room is more extensive. Fans of bath procedures recommend using natural raw materials for such rooms - wood or stone. Among the wood, pine is the leader - this is an affordable material, however, it darkens with prolonged use.

Washroom design example Source profstroiplotnik.ru

Plastic is acceptable, as there is no high temperature, and it tolerates moist air well. For the shower, you can use ordinary tiles.

What is better to use for decorating a rest room

The rest room should be beautiful and cozy, so the design of the room comes out on top. It is not necessary to install heat and moisture resistant materials here. The relaxation area should be:

easy care;

hygienic;

environmentally friendlym;

comfortable;

aesthetic.

Video description

For interesting ideas for interior decoration of the bath, see the video:

Finishing the rest room in the bath, in addition to traditional wood, can be done:

cullet;

porcelain stoneware;

natural stone ;

decorative plaster.

Important! The tree is not mounted immediately after delivery to the construction site. It is brought into the room and allowed to stand for a couple of days, so that it "gets used" in the bath. After such a procedure, the tree does not undergo deformation when heated and high humidity.

Conclusion

Finishing the bath from the inside requires effort and imagination. But, if you do everything right and entrust this work to professionals, the bath will last a long time to restore strength and health. It remains for you to choose what will be the finish of the bath inside: a photo of the steam rooms will help you find the best option for style and materials.

With the advent of cold weather, one wants to wrap oneself in the warmest clothes and wait for the arrival of spring. However, spring will not come soon, but you don’t want to sit like a “cabbage” in 10 sweaters. What to do in this case? It's time to heat your bathhouse, because going to the bathhouse in severe frosts is just an inexpressible feeling. No cold medicine can replace a visit to the bath. And in order to make going to the bathhouse even more pleasant, we offer you 100 best ideas bath finishing.

Bath interior design

The classic Russian banya includes a dressing room, a steam room and a washing room. If funds allow, you can make a pool, a games room, a recreation area, a kitchen and everything you want.

Laconic decoration in Russian style with a massive table, benches and couches is the most popular among fans of the bath.

The bath can be decorated with carved wooden items, oak and birch brooms, bundles of fragrant herbs.

Materials for finishing the bath inside

Materials for finishing the bath must be resistant to temperature extremes and humidity. Of course, do not forget about safety, because the materials must be hypoallergenic and do not emit toxins.

Equally important are the durability and practicality of the materials. A cheap material that has a short lifespan will eventually cost more because it will need to be replaced after 3-4 years.

Often used to finish the steam room and dressing room different varieties wood. Combination of different shades healing properties and aromas of wood gives a good effect.

steam room

For a steam room, wood is chosen without the content of resinous compounds, with low heat transfer and resistant to high temperatures and high humidity.

Linden has a pleasant aroma and does not emit resins when heated. It has low thermal conductivity and high moisture resistance, due to which the steam room heats up quickly.

Aspen is a very dense and durable wood. Resistant to decay, fungus and mold.

Alder has a water-repellent effect and a beautiful appearance.

Abash has low thermal conductivity and does not darken at all.

The desire to protect the tree from decay is understandable. But in no case should you cover the tree with varnish or paint. Instead of a wood scent, you will get a chemical smell. Even if there is no unpleasant smell, it will definitely not benefit health. The best option is to leave the steam room without impregnations and coatings, properly caring for it - ventilate and dry.

Instead of wood, it is better to make the floors in the steam room from tiles - the tiles dry quickly and are resistant to the appearance of fungus.

Beds in the steam room are best made from aspen, linden or alder.

dressing room

Conifers, whose aroma is not only pleasant, but also incredibly useful, and birch are suitable for finishing the dressing room.

Pine is the most practical and durable material for decoration.

Spruce is lighter than pine and is also excellent as a dressing room material.

Fir is a material from which resin practically does not stand out.

The arrangement of the bath is the final stage of its construction. It refers to interior decoration. Most often used for this wooden lining or boards from various breeds wood. Before proceeding with the finishing, it is necessary to determine the material, evaluate its positive characteristics, and identify the disadvantages. In addition, you should consider the design of the room, purchase the necessary devices, accessories and original decor to decorate it.

Features and finishing requirements

Why do you need finishing in the bath? This question often arises, especially when working indoors, which is a log house. The log surface of its walls is quite decorative in itself. Here are a number of arguments - why finishing is still necessary in conditions of high humidity and temperature. It performs the following functions:

• protects walls from moisture;
• behind it, you can hide thermal insulation and waterproofing, providing an even greater degree of protection;
• compensates for the heating of surfaces and prevents burns, thereby increasing the comfort level of visitors;
• has a variety of therapeutic and prophylactic effects depending on the type of wood;
• decorative finishing makes being in the bath not only useful, but also pleasant.

Step-by-step interior work plan:

1. We sheathe the walls, ceiling and floor with lumber in sequence.
2. We cover ovens.
3. We design benches in the steam room.

When choosing the best wood for finishing a bath, you need to be guided by certain parameters. The product must have the following qualities:

• resistance to high temperature and humidity;
• safety in contact with people;
• durability;
• ease of processing;
• acceptable cost.

Finishing boards must be subjected to shrinkage to a moisture content of 10% and thermal exposure. These procedures improve their performance.

Bath rooms and their functionality

Even the smallest bath should be divided into several rooms. This allows you to select separate zones with different functionality, maintain the required level of temperature and humidity in each of them, and make the use of all options comfortable and safe.

Traditionally, the bath consists of:

• dressing room - does not allow cold air to enter the room, and warm air to leave it. This required element the buildings. If it is not possible to equip a full-fledged vestibule, you can get by with a miniature nook with two doors that open in different directions. In the dressing room, you can arrange a dressing room - place small benches and a hanger so that you can leave clothes and change shoes. If the vestibule is combined with a rest room, then there may be a table, equipment for broadcasting video and audio, a grill and much more;
• washing room - a room separated by a door from the steam room. Supported here comfortable temperature. Washing in a hot steam room, where a red-hot stove is located, is difficult and unsafe. In addition, it is much more difficult to thoroughly warm up a large room than an isolated space of 3-4 square meters. m. The size of the washing room depends on its purpose and the number of family members. If you plan to use it also as a laundry room, or you are going to bathe several children at the same time, you will need a spacious room. If the bath is built in the country and is intended for meetings with friends, a shower in one of its corners will be enough, and half a square meter is enough for this;
• steam room - the main room - the "heart" of the Russian bath. It is devoid of windows and is located at the maximum distance from the entrance. It has a stove that heats up the room. There are also shelves for accommodating people. They can be shortened - intended only for sitting and long. On horizontal beds you can bathe, stretching to your full height. If you need to use a small space to the maximum, you can install a cascading shelf structure in several "floors".

The choice of material for thermal insulation

In order to ensure high-quality thermal insulation of a log or brick bath and avoid the formation of condensate, it is recommended to use the following materials:

• foil mineral wool is one of the most effective heat insulators in the middle price category. Of all types of wool for warming baths, basalt is best suited. It has low thermal conductivity and high durability. The material is presented in the form of plates or rolls with a thickness of 5 to 10 cm, equipped with a single layer of foil. For its installation, it is required to build a frame of wooden planks;
• foamotherm - the basis is foamed polypropylene, on which one layer of foil is applied.

Significantly accelerates the process of heating the steam room to the required temperature, retains heat for a long time. The material is safe for humans because it does not contain toxic substances. It was specially developed for the thermal insulation of baths, so the heat of the steam room is not terrible for him. Fastens directly to the wall with a stapler, and then fixed with a crate for finishing.

Materials used for finishing

The choice of materials for interior design depends on various factors. This is affected by the type of bath, features various materials, the size of the budget. In any case, it should contribute to a comfortable stay, be cozy, aesthetic and functional. If you wish, you can do the finishing work with your own hands and invest the allocated money in more expensive materials.

Prioritize quality products. This will ensure maximum safety and health for you and your family.

Wall and ceiling decoration

For wall cladding in wet rooms - washing rooms and steam rooms, chipboard, linoleum and other products of the chemical industry cannot be used. Here should reign natural wood. For walls fit lining or grooved board made of cedar, linden, aspen, larch, abacha. It is unacceptable to cover the surfaces in the steam room with varnish or paint - when heated, their evaporation can lead to toxic poisoning.

IN washing department you can sheathe the walls with inexpensive pine clapboard or tile. IN brick bath installation of tiles will not cause difficulties, and in wood you will need to create a base from sheets of moisture-resistant plywood, gypsum board or OSB.

Cedar, linden, aspen lamellas are suitable for finishing the ceiling.

Floor finish

The process of arranging the floor is as follows. The first step is to mount the lags. They are made from timber 200x200 mm. A board is laid on top - edged or tongue-and-groove, with a tenon-groove system. When heated strongly, the wood of coniferous trees releases resin. Therefore, it is better to choose lumber made from hardwoods other than oak. The best choice is larch. Small gaps are left between the joints, which are useful for ventilation and removal of excess water. For washing, this is especially important.

The floor in the steam room must be raised 15-20 cm from the main level. This is done to prevent unnecessary heat loss.

To protect the boards from the fungus, they are treated with antibacterial compounds. In order to prevent swelling - cover with a primer. You can install a ladder and make the floor at a slight slope towards the drain.

For the floor in a brick bath, matte or corrugated tiles are perfect.

Characteristics of the wood used for finishing steam rooms

The comfort and safety of its visitors depends on the correct choice of finishing material for the bath. Traditionally, natural wood is used - an environmentally friendly and affordable raw material. The culture of the bath was born a long time ago and since then a lot of knowledge has accumulated about the properties of a particular wood. Each of them has special characteristics and healing qualities that allow you to create a unique microclimate in the steam room. There are many options for wood that can be used to finish the bath. These are the usual linden, alder, larch, birch and exotic abachi oak. Let's figure out how they differ and which breeds are best suited for a particular bath.

African oak abachi is a member of the Malvaceae family. In another way, it is called abashi, ayous, samba. This tree is capable of reaching gigantic sizes - its trunk height can reach up to 40 m, and its diameter can reach up to 3 m. Abachi has a strong wood with a dense and even texture. It retains its shape well and is easy to process due to the absence of knots - the crown is located at the very top of the tree. This is an expensive material, which is comparable in cost to mahogany, but its remarkable qualities allow it to remain very popular and in demand.

Properties of abacha wood. The main advantage of this material is its low ability to conduct heat. Thanks to this, in rooms with such a finish, coolness will remain in summer, and warm in winter. In the bath, this feature manifests itself as follows - the boards practically do not heat up, so it is impossible to get burned when sitting on an abacha shelf. In contact with the human body, the wood takes on the temperature of his body. In addition, it does not emit resinous substances, even with strong heating.

The positive characteristics of the African oak do not end there. In the list of its advantages, resistance to:

• deformation during drying;
• mechanical damage;
• shrinkage;
• discoloration with prolonged use;
• high humidity - the boards remain dry even at a humidity of 12%. They practically do not absorb water, even from the end sides.

Oak abachi is easy to process, which can be done by hand. Due to the dense structure, cracks do not form in it when nails are driven in, and screws are screwed in well and hold securely. Lumber can be easily glued, toned. In the interior, they are perfectly combined with other types of wood.

abacha wood - expensive pleasure. If you decide to finish the bath with this material, be careful - choose a really high-quality product.

Noble cedar is the choice of aesthetes. Finishing from this material looks expensive and spectacular. Light ocher-yellowish cedar wood has a smooth and beautiful texture. Annual rings and resin passages are clearly visible on it. Cedar is a natural antiseptic. The finish made from its wood makes the air sterile, cleans it from harmful bacteria. Essential oils have a beneficial healing effect on human health and fill the room with a wonderful coniferous aroma.

Wood has a high density and at the same time softness, which makes it easy to process, is not afraid of moisture, temperature changes, the effects of fungus and insects.

Of the minuses of the material, one can single out its high cost and insufficient durability of the aroma. It is noted that the smell disappears within six months after the start of operation of the bath.

Alder wood is very popular. It has one of the most important qualities for a steam room - it does not heat up too much. This ensures that you and your loved ones do not get burned when touching the wooden surfaces. Immediately after sawing, the wood has a light shade that magically changes when it comes into contact with air. It acquires a reddish undertone, which makes it similar to more valuable breeds - cherries, walnut. The unique aroma of alder resembles the smell of cognac, and like the latter, its richness and nobility only intensify with time.

Finishing from this wood is great for a bath, because it is not afraid of humidity and temperature changes. Resin does not stand out from it, and this is very important for a hot room. The only difficulty is to choose high-quality material - a smooth, defect-free lining made of alder at affordable prices is not at all easy.

Reddish larch wood contains many substances useful for the human body. This material has high mechanical properties and is able to honestly serve for decades. She is not afraid of high temperature and humidity. Among the shortcomings of larch, one can single out the difficulty in processing - due to the large number of knots and the low ability to thermal insulation.

The cost of wood is quite adequate to its characteristics. A long service life will more than pay off the investment made.

In Russia, this tree has long been revered for its beneficial features. Its fragrant soft pink wood is very popular and is often used in the decoration of baths. It compares favorably with other breeds by its even structure and characteristic brilliance. Linden is easy to work with because it is a soft wood and does not crack during the process. The relatively low density of the material increases with decreasing humidity.

The steam room with linden trim has healing properties and is recommended for the prevention of diseases of the respiratory organs, in particular the lungs.

Humid environments may cause the wood to gradually change color, but this will not affect its strength and durability. When handled with care, the Linden finish will delight you for years to come. The cost of the material cannot be called too low, but it is not too high either. Therefore, it is suitable for most bath lovers who want to equip their own steam room.

Aspen - occupies a leading position among the hardwoods of Russia and is second only to birch. Its white wood with an implicit bluish-greenish tint has a uniform structure, softness, straight grain. Clapboard and other aspen lumber are light in weight and lend themselves well to processing - cutting, turning, and are resistant to abrasion. Due to their strength, durability, and excellent ability to retain heat, they are widely used in the improvement of baths and saunas. Aspen shelves do not overheat and do not burn.

The main advantage of this material is that a long stay in water does not damage its integrity and after drying it does not “lead”. That is why aspen was often used in the manufacture of well log cabins.

Birch wood has a pinkish or yellowish white tint. Old trees boast a light brown saw cut color, cast with a soft luminous sheen. Sinuous fibers combined with dark inclusions form an interesting pattern. Birch has a homogeneous, dense and elastic structure. Thanks to this, it is easily processed not only with machines, but also with the help of conventional hand tools.

The bath, finished with a birch board, helps to relieve fatigue and feel a surge of energy. Regular visits to such a steam room increase the body's resistance to colds.

Unfortunately, this material will not be able to serve for a long time in "wet" rooms, since high humidity and heat are extremely harmful for it. For a rest room, it will fit much better. You can extend the life of birch trim with the help of a special treatment that will prevent decay.

Ash is the owner of hard, heavy and strong wood. The light brown core of the tree with an olive-brown tint smoothly turns into a yellowish-pinkish sapwood. Large vessels make the texture of wood very spectacular and beautiful. When stained, the pattern of the fibers becomes even more expressive and contrasting. The material is highly resistant to moisture, characterized by moderate shrinkage. It lends itself well to processing and polishing.

Picturesque texture, high strength, hardness, low water permeability, resistance to deformation, high impact strength, resistance to fungus and insects. All these qualities allow ash to stand on the same level as oak and even surpass it in some respects. It is these properties that make it possible to widely use its wood in the production of building materials, which are very useful in arranging a bath. This is eurolining, an imitation of timber, logs, in a different way - a block house.

Design, decoration and equipment of premises

The choice of design depends on the preferences of the future owner, the size, nature and purpose of the functional areas inside the bath room.

Steam room design

The interior of the steam room should ensure the comfort and safety of visitors. The availability of elements, straight and rounded lines of its filling, of course, will make the room as comfortable and ergonomic as possible.

The main space is given under the shelves. For their manufacture, narrow wooden planks are used, which are stuffed with a certain step. Gaps are necessary for proper air circulation and quick drying of wet boards. In addition, gaps make the design more elegant, light and airy.

Lighting is best organized using small built-in or pendant lights with soft diffused light. Lampshades made of wooden planks are ideal for decorating the room.

The stove-heater is an indispensable element of the steam room. There are many variations of its design and location. The choice and placement of the heater depends on the size of the room, its configuration, and the location of functional zones. If the heater must heat two adjacent rooms, then it must be placed between them. In a polygonal grill bath, the oven is installed in the middle, and the chimney is led out through the center of the roof.

Finishing the steam room will become more spectacular if you alternate lamellas from different types of wood. Aspen inserts become even darker over time, so the wooden mosaic will become more contrasting and expressive. Perfectly complement the interior inserts made of brick, glass or marble, placed in hard-to-reach places.

Furnace - types and selection criteria

Sauna stoves can be classified according to various characteristics. First, according to the material of manufacture:

• brick - a traditional solution, quite expensive to perform and maintain. Such stoves retain heat for a long time, can heat large rooms and are relatively safe. Their disadvantages are that they warm up for a long time and take up a lot of space in the steam room;
• metal from steel - their advantages are in small size, simple installation, high heating rate. back side medals is that they are not powerful enough for large steam rooms, they cool down as quickly as they heat up, so you need to constantly keep burning, they do not have a sufficient level of fire safety, you can get badly burned on contact with them.
• cast iron metal furnaces are strong, durable thick-walled furnaces that have approximately the same characteristics as steel furnaces.

Another sign of sauna stoves by which they can be classified is the fuel on which they operate. Heaters can run on wood, gas and electricity.

When choosing a furnace, you need to focus not only on the material and type of fuel. The most important criterion is the power of the device. It must match the volume of the room. Otherwise, it may happen that a stove that is too powerful will heat the air, and not the stones. And too weak to warm up the steam room will have to work at the highest speed. In such conditions, it will quickly fail.

Stones - what and how to choose

The quality of the stones directly affects the uniformity of heating the steam room and the quality of the steam. This indicator depends on the type of stones, their heat resistance, size, shape, location in the heater. For sauna stove best suited stones that were formed as a result of solidification of magma. They have passed the test of extreme temperatures and therefore have unsurpassed heat resistance. When hit with a hammer on such a stone, a sonorous sound should be heard. If the sound is muffled, this indicates that in front of you sedimentary rocks which are absolutely not suitable for a sauna stove. For use, you can take the following types of stones - gabbro, porphyrite, basalt, raspberry and white quartz, talcochlorite, talcomagnesite, jadeite.

Shower room / washroom

Another finishing option is tile, marble or porcelain stoneware. Floors can be tiled with rough tiles, put rubber mats on top or wooden grate. You can combine materials and use tiles only in the shower area.

The washing room can be organized as a separate room, or located directly in the steam room. In this case, it is necessary to ensure the location of different zones in two levels - place shelves at the top, and make a shower at the bottom, fenced off by a deaf or transparent partition.

It is necessary to equip the washing compartment with ventilation, which will help moisture evaporate in a timely manner and prevent rotting of the wood finish.

If the room is small, a shower will successfully replace a bucket of cold water. It is useful for contrast dousing to freshen up after leaving the steam room. In addition to such a bucket, you should put benches for clothes, hygiene products and accessories.

The modest size of such a room does not allow you to install a large chandelier. Therefore, it would be more correct to prefer wall spots or spotlights.

If there is plenty of space, the functionality of the washing room can be seriously expanded. Here you can install a miniature pool, a massage table, a stylist's chair.

Arrangement of the rest room

If you managed to allocate a room in the bath where you can gather with friends or indulge in relaxation, do not forget to carefully consider its improvement. The rest room is a corner that can be filled with home warmth and comfort. Its interior should support the overall design idea and be combined in style with the rest of the bath areas. Therefore, you need to make sure that every detail harmoniously fits into the overall style and decorates the room.

In this room it is better to refuse large windows. abundance sunlight and drafts are useless here. As curtains, you can choose rolled or narrow Japanese models. The atmosphere of "naturalness" will be supported by bamboo blinds.

If the recreation room is not also the main dining room, you can do without central chandelier. The subdued light of spotlights will be quite enough. Furniture should be selected depending on its purpose and the size of the room. It can be a huge reception table or a fireplace area with soft sofas and pillows. If space permits, organize small shelves for storing oils, brushes, washcloths, hats, bathrobes and other bath accessories.

Everyone chooses the filling of the rest room in accordance with their interests. Some need a huge plasma, others would prefer to surround themselves with their favorite books, others would like to create a modern gaming area with a pool table or air hockey.

Registration of baths with a billiard room

Fans of battles on a table covered with green cloth should consider the presence in the bath a separate room, with access to the courtyard or balcony. The room should be:

• completely isolated from "wet" rooms - steam room and washing room;
• have at least two windows;
• have an area of ​​at least 35 sq. m.

In the billiard room, soft leather furniture is often placed, independent fireplace organize a bar with drinks. The game space is designed, like all similar projects, when the billiard room is located in one of the rooms country cottage or a private house.

In spacious rooms, you can install a small bathing tank. It can be made of wood, concrete, metal or composite materials. In appearance, it often resembles a trough or barrel. The font can be the most different shapes- round, angular, rectangular. Capacities vary:

• according to the embedding option - portable, in-depth or open;
• according to placement in the bath areas - in the steam room, in the washing room or in the country courtyard;
• according to the configuration - with seats, with metal staircase, with heating and hydromassage.

Conclusion

The arrangement of the bath is a laborious, but very pleasant process. Just imagine how wonderful you will spend time in your own steam room, gaining strength and forgetting about all the troubles and worries.

To perform the interior decoration of the bath, you need knowledge of the properties of wood and stone, safety requirements and minimal skills in working with wood. We will talk about the materials and types of finishes recommended for use in the bath, and the skills of a joiner and carpenter will have to be acquired along the way.

Does the bath need finishing

Regardless of what kind of bath you have - Russian, Finnish sauna or Turkish hammam, a bath is high temperature and high humidity. Without finishing, without isolating the walls, floor and roof, you will be forced to heat the steam room for hours, and with it the surrounding air, throwing money literally into the wind.

Due to the difference between the outside and inside temperatures, moisture will condensate on the walls, which over time will lead to the formation of fungus, mold and decay. wooden structures. If the building is made of masonry material (brick or blocks), a steam room without finishing threatens to burn when in contact with a red-hot wall. Only in the case when the bath is cut down from logs or folded from timber, can it be left without additional finishing if the thickness of the walls provides standard resistance to heat transfer. If this is not the case, we return to reading the first sentence of the paragraph.

If the bath is made of logs, complete interior decoration can be omitted

There are many requirements for the decoration of the bath in terms of safety:

The walls and floor of the bath are most often insulated with stone or basalt wool, but this is not the best option: mats and slabs of mineral insulation contain a small amount of bituminous binder, which evaporates under the influence of high temperature, as well as the smallest particles of fibers that cause irritation when deposited on the skin.

A safer and more economical option - foam glass insulation - avoids these disadvantages. Vapor barrier is performed with aluminum foil or foiled polyurethane foam, which belongs to the group of non-combustible materials and will serve as an additional heat insulator.

Finishing materials for a bath - how not to make a mistake

Interior decoration different rooms in the bath, performs different tasks, in accordance with them, and choose the type of finish.

Table: requirements for finishing the bath

room	Peculiarities	Type of finish
		Floor	Walls	Ceiling
steam room	High temperature - fire protection of wood is required. Humidity - impregnation with antiseptic and fungicide is required	Ceramic tiles or porcelain stoneware with waterproofing, hardwood flooring, drainage	Hardwood cladding, stone or brick cladding at the heater	Hardwood false ceiling
washing	Humidity - materials are needed that allow periodic washing of surfaces	Ceramic tiles or porcelain stoneware with non-slip surface, drainage	Tiling or finishing with materials that allow wet cleaning	moisture resistant painting or false ceiling
Restroom	No requirements	Wood or underfloor heating with tiles	No requirements	No requirements

Steam room finishing

For steam room cladding, it is better to use hardwood, which does not emit resin when heated. When choosing a material for wall cladding, one must remember that a bath is not only pleasant, but also useful. Inhaling phytoncides secreted by a heated tree into the steam room, we increase the body's resistance to colds, and heal the respiratory tract.

Type of wood	Advantages	Flaws
Oak	Sturdy wood, durable, great looks	Slips when wet, high price
Ash	Durable wood with beautiful pattern, resistant to decay	High price
Birch	Light pleasant aroma	It is susceptible to decay, does not hold its shape well at high temperatures
Linden	It has a pleasant color when heated, exudes a delicate aroma, is resistant to rot and high temperatures, is affordable	No
Aspen	Low price, light pleasant aroma	Subject to rotting, over time changes color to dirty gray
Alder	beautiful appearance, affordable price, odorless, does not absorb odors, durable	No

If you are interested in a budget option for finishing - choose alder, if there are no cost restrictions, then the best option is ash.

Bath, trimmed with ash clapboard, will look prestigious and expensive

For lovers of coniferous smells, a combined finish can be offered: where contact with the skin is possible, we make hardwood finishes, and, for example, we sheathe the space under the shelves with cedar, larch or pine.

For lining the wall section near the heater, it is necessary to choose a material with high heat capacity and thermal conductivity, which ensures maximum accumulation and uniform heat transfer. The structure of the stone must be homogeneous so that it does not explode when water enters. Stones are selected in round or oval shape with a smooth surface for free air circulation, optimal size- from 5 to 21 cm. Another requirement is environmental safety: when heated, they should not emit harmful substances.

Table: properties of stones for a bath

Mineral	Properties
Gabbro - diabase	Gabbro - diabase is the most affordable and popular option. The stone is dark gray, almost black in color with low water absorption, excellent heat capacity and very durable. Unfortunately, with strong heating, it emits an unpleasant odor, and when it hits essential oil forms a deposit on the surface.
Soapstone	Talcochlorite is durable, strong, has excellent heat capacity, it comes in colors from light gray to cherry. In order to exclude dusting, the stones are washed and calcined before the first use. It has a pleasant, light steam with a healing effect: reduces pressure, heals respiratory system and skin. Negative characteristic - high price.
Basalt	Basalt is the hardest stone of all volcanic rocks. It has only positive characteristics - it is strong, durable, has a large heat capacity, perfectly tolerates temperature changes, does not emit harmful substances. I am pleased with the availability even the price.
Jade	Jadeite is a semi-precious stone, so do not be surprised at the high price of this mineral. The color from white through emerald green to black makes it attractive in appearance, and its medicinal properties valued in ancient China. An excellent choice for people who care about their health.
Crimson quartzite	Raspberry quartzite, just like jadeite, is attractive in appearance with its bright color and has excellent operational qualities - hardness, durability, heat resistance, low water absorption and environmental safety. Tolerates well high temperature, you can pour water on it without fear of an "explosion". When buying, you should avoid split stones, as they will continue to crumble.
white quartz	White quartz is not very durable and does not tolerate high temperatures, but due to its spectacular appearance it is one of the most expensive stones: this translucent mineral consists of silicon and oxygen molecules, and when heated, it releases ozone, which makes the steam room with it especially useful.

The ceiling in the steam room above the heater, as well as the wall behind it and the floor around it, requires protection with fireproof material. Above the heater, you can make a plot false ceiling from soapstone slab. Soapstone is a versatile material for heater stones, floor and ceiling wall cladding. A more budget option is a metal sheet above the stove, the foundation and wall cladding of solid, well-fired bricks.

Soapstone can be used not only as a material for stones, but also as a wall and ceiling decoration behind the heater

The floor in the steam room is made of concrete or ceramic tiles, with waterproofing and a ladder for draining water. Hardwood flooring is laid on top.

Finishing materials for washing

A washing room with open shower screens requires the installation of channels, drains and a moisture-resistant finish: facing with ceramic tiles or other durable and moisture-resistant material that can withstand elevated temperatures.

If it is planned to install individual shower cabins, such a finish is not required, you can sheathe the walls with clapboard, paint them or plaster them with moisture-resistant decorative plaster.

In order for water not to affect the frame of the sink, it is tiled

It is desirable to perform floors with heating. The tile should be with a rough surface, excluding slippage. It is undesirable to make an oak floor in wet rooms, as it is very slippery when wet. A coating of coniferous wood is welcome, especially larch, as the most resistant to decay.

The area of ​​the floor near the font, where significant spills of water are possible, is best made of ceramic tiles with a ladder.

The ceiling of the washing room will have to be washed periodically, respectively, the material must withstand processing detergents: larch lining, metal rack or cassette suspended ceilings.

Restroom

The rest room has no restrictions on decoration, with the exception of a warm floor - it is always pleasant to walk barefoot on a warm tree. The rest of the interior design depends on the taste and requirements of the owner of the bath.

Photo gallery: options for finishing the premises of the bath

In this steam room, the firewood rack serves as an interesting element of the interior. Soft diffused light and heat from a brick Russian stove will create an unforgettable experience of visiting the bath Protective rail lampshades protect lamps from mechanical influences and create directional light streams It is very comfortable to take bath procedures in a small steam room The interior of the steam room is very decorated with a combined layout of a lining made of wood different types A steam room for a large company should be heated by a high-powered heater

Do-it-yourself bath decoration

In order to be beautiful in the bath, you need to choose reliable and high-quality finishing materials and mount them in accordance with the specifics of the premises described in the previous sections.

Choice of finishing materials

The choice that takes into account the size of the building, personal taste and financial component will be optimal for each owner of the bath. In order not to make a mistake when buying material, you must first:

Calculation of the area of ​​premises

To determine the need for materials, it is necessary to know the surface area to be finished. All calculations are done in meters.

For the floor and ceiling, multiply the length of the room by its width. To get the area of ​​the walls, we calculate the perimeter of the room: add the length and width and multiply by two. The product is multiplied by the height of the ceilings. From the result we subtract the area of ​​​​doors and windows, if any.

In rooms with complex combined finishes, the area of ​​​​each section is calculated separately.

How to buy quality materials and prepare them for installation

When choosing a material, it is necessary to pay attention first of all to the quality of the goods.

Calculation of the need for materials

1. Find the area of ​​one board. So, with a standard length of 6 m and a thickness of 90 mm, the area of ​​\u200b\u200bthe board will be equal to 6 ∙ 0.09 \u003d 0.54 m 2.
2. Calculate the surface area to be treated. Suppose that it is necessary to upholster the walls of a room measuring 3 x 6 m with a ceiling height of 2.5 m. The surface area is: (3 + 6) ∙ 2 ∙ 2.5 \u003d 45 m 2.
3. Calculate the number of boards. To do this, we divide the surface area by the area of ​​​​one board: 45 / 0.54 \u003d 83.3 boards.

For example, here is the specification of the material for finishing the steam room:

In the same way, the need for wood is calculated for the remaining rooms.

To calculate paint and varnish materials, the surface area should be multiplied by the paint consumption, which is usually given on the package in liters per square meter. The product will show how many liters of paint you need to buy.

All goods must be bought with a margin of 10%, taking into account the tolerance for waste and defects in work.

Required Tools

To finish the bath with your own hands you will need:

1. Perforator.
2. Screwdriver.
3. Building level.
4. Hammer.
5. Furniture stapler.
6. Plane.
7. Hacksaw or electric jigsaw.
8. Self-tapping screws, nails or clamps.

Step-by-step instructions for finishing the bath

Work is performed after laying electrical wiring and ventilation ducts, starting from the floor. The floor of the steam room is raised 10-15 cm above the level of adjacent rooms. After the clean floor is laid, proceed to the decoration of the walls. The ceiling is completed last.

1. Making a frame for insulation. The frame is assembled from a 100x40 mm timber impregnated with a flame retardant and fungicide. The beam is fastened with screws or dowels to the wall at intervals equal to the width of the insulation plate minus 5 mm.

   A frame made of wooden beams is mounted on the walls and ceiling

2. Heater installation. Between the bars of the frame, plates or mats of insulation are laid on heat-resistant glue with additional fastening with dowels, 5-6 pieces each. per 1 m 2.
3. Installation of heat-reflecting material. Aluminum foil or foil fire-resistant film, for example, foil foam, is fixed with staples using a construction stapler to the thermal insulation layer.

   On the heat-reflecting layer, a counter-lattice is mounted under the finish coating

Wall cladding. The lining is attached to the frame in accordance with the selected layout. Nails are hammered into the grooves so that they are not visible on the finish. Nail the plinth.

For finishing the premises in the bath, you can choose different types of wood with different shades of color.

Installation of the false ceiling frame. To the floor logs or to the walls of the 100x50 timber with a vertical orientation, the frame of the false ceiling is attached. The distance between the bars should correspond to the width of the insulation board minus 5 mm for the spacer.

The ceiling installation is started after the wall cladding

Installation of heat-reflecting material. Foil or foil material is fixed in the same way as on the walls.

Clapboard ceiling lining. It is carried out similarly to wall upholstery. The section of the ceiling above the stove is protected by non-combustible material: stainless steel sheet or plate material. Attached ceiling plinth.

A foil vapor barrier is attached to the insulation, and then a lining is nailed to the finished crate

Video: interior decoration of the steam room

Having got acquainted with the requirements for the premises of the bath and having studied the information on the correct execution of the finish, you have received the necessary theoretical knowledge. The work does not require special professional skills and is within the power of any homeowner.

The bustle of a densely populated city makes us forget how useful it is, at least occasionally, to take a steam bath in,. However, not every steam room in the private sector can boast of the aesthetics of the interior and exterior. And this is an important factor. It is unlikely that you will be able to relax your body and soul in a gray, dull building. Today we will talk about the interior decoration of the bath. We will figure out which material is better to use for a particular room, consider the stages of work that need to be done. It makes sense to get acquainted with the photo of the interior decoration of the bath, which will be presented in today's article.

The interior decoration of the bath begins with the floor. It is poured with a concrete screed, on which logs are subsequently laid, a rough coating, and after that finishing floors are laid. The next step is the decoration of the walls. The ceiling is finished last. But in order to perform finishing work, you should select and purchase material, the range of which is huge on the construction markets today.

After the construction is completed, the first thing to consider is what is being done from the inside. Although no one interferes with laying a heat-insulating layer of foam or other outside.

Materials used for finishing the steam room

The materials intended for such work are quite diverse. Among them:

• lining;
• block house;
• timber imitation;
• oriented strand board (OSB).

If we talk about the benefits, aesthetics and compare the complexity of the installation of various materials, then lining wins in all respects. However, its cost, if we take into account quality products, is quite high. Let's try to consider all the listed finishing materials. This is the only way to understand which one to prefer.

Lining: the pros and cons of finishing material

The algorithm for working with lining is as follows. Guides are fixed on the wall - or a narrow thick board, in increments of 80-100 cm. Their location coincides with the planned direction of the lining.

Important! It is better to place the lining vertically - this will not allow dripping drops of moisture to linger in the connecting joints. If, nevertheless, it is decided to place the boards horizontally, then the connection spike is directed upward, and the groove, respectively, downward. This will prevent moisture from getting inside.

Having fixed the guides, we lay layers between them mineral wool(it is not necessary to ram it) and we fix the vapor barrier material, the seams of which are glued with aluminum tape.

Good to know! When installing thermal insulation, special attention is paid to the corners. They are the “weak link” for drafts, cold from the street, and hence heat leakage from the steam room.

We suggest that you familiarize yourself with the photo of the arrangement of baths inside with your own hands:

The nuances of finishing the bath clapboard inside with your own hands

Like any work, lining the bath with clapboard has its own nuances. The main one can be called the fastening of the finishing material to the crate. To do this, you can use nails (better "German", having a corrugated surface). However, it's best to use .

The microclimate in the steam room changes periodically, which leads to the expansion and drying of wood. This will eventually lead to the fact that the nails will cease to fulfill their function - to hold the lining on the crate. In this sense, the screw screw is more reliable.

Important! Before the beginning finishing works you need to treat the lining with an antiseptic and flame retardant and wait until it dries completely. This processing is only needed once.

Block house: what is this material and how to work with it

Block house (from the English block house) is a kind of lining (according to the way the parts are connected). However, the appearance of the block house is different. The finished wall looks like it was made of logs. The material is used for facades and interior finishing works.

Installation of a block house does not differ from lining, but there is one nuance in its application. The coating requires treatment with antiseptics and flame retardants at least once every 2-3 years.

Important! When choosing such a finishing material, pay attention to the type of wood from which the blockhouse is made. For the interior lining of the bath, only hardwoods are suitable (most the best option will become a linden). For the dressing room, cheaper ash or white acacia wood is chosen. Exterior decoration is carried out with coniferous trees - pine or spruce (aspen is allowed).

The photos of the saunas outside and inside below will allow you to draw up a general concept for the future project:

Imitation of timber: features, advantages, disadvantages

Again, wall cladding technology is similar to clapboard. However, panels imitating timber are wider. In addition, they have a serious advantage - with temperature changes, humidity, they do not crack. This is achieved through grooves inside, serving to relieve the stress of wood.

The choice of material is subject to the same rules as in the case of choosing a block house. Speaking about the minuses, we note only unscrupulous manufacturers, violations of drying technology. In addition to the "human factor", the imitation of timber has no drawbacks. The average service life of such a finishing material is 10-20 years.

Helpful information! If there is no desire, time or opportunity to sheathe the bath inside on your own, you can turn to professionals. But such services can open a significant gap in family budget. According to the most conservative estimates, the cost of finishing 1 m 2 will be 2000-2500 rubles.

Laying tiles - do it yourself or turn to professionals?

Tiles are used for flooring. Less often it is used for walls. Inexperienced home craftsmen fear that they cannot do such work on their own, but this is a delusion. In order to dispel doubts, we suggest that you familiarize yourself with step by step instructions laying tiles on the example of the flooring of the kitchen or hallway. The work algorithm is identical. The only difference is in the composition of the tile adhesive - for the bath you need to choose a composition that is not afraid of high temperatures.

Related article:

Photo examples of layout options, advantages and disadvantages of coverage, specifications and tile sizes, selection criteria, laying subtleties, expert recommendations - read in the publication.

There are some nuances in the choice of tiles. You should pay attention to the surface - glazed is not suitable here, the surface should not be smooth, preventing slipping. At all, flooring in a steam room requires a special approach. Let's try to parse it in more detail.

Rules for laying the flooring of the washing room or steam room

The first thing you should pay attention to is the screed. It is performed in 3 stages. The first layer is poured first. After complete drying, thermal insulation is laid, after which the finishing layer is poured. In this case, the floor covering should be 5-20 cm higher than the poured concrete.

When installing wooden floors, a “leaking” option is often used, when water seeps through cracks in the floor without hindrance. This will require external installation. This method of drainage is simpler and does not require high costs time, effort and resources.

The second option is non-leaking, sealed floors. Most often used in flooring. In this case, the floor is sloped in a certain direction, and a ladder is mounted at the lowest point - a drain hole. Under the floor from the ladder there is a sewer or.

However, in addition to drainage, the flooring in the bath has one more nuance - the use of tiles requires heating. Ceramics - cold material. Considering that the temperature at the bottom is always lower than at the top, a system should be considered.

Installation options for underfloor heating in the bath

Underfloor heating systems are quite useful not only in the apartment, but also in the bath. The main task here is right choice kind. They can be:

• electric(using heating cable);
• water- using a heat carrier heated by a boiler;
• - comparatively the new kind heating with infrared radiation.

If speak about wooden floors, then the optimal (albeit rather labor-intensive) solution would be to use water heating. Tiled flooring is more compatible with electrical warm floors using a cable. The installation of infrared in "warm floor" systems in the bath is rarely used due to high cost. Although the energy savings of this type of device is significant, in comparison with the cord.

Bath interior options inside: photos of various rooms

As you know, the bath can be divided into several rooms, each of which is designed based on the preferences of the master. It can be one style, and perhaps each of the rooms will be decorated in its own way. Now we will consider in detail how the interior decoration of the bath can be done with your own hands, depending on the purpose of the room. But first you should familiarize yourself with the ideas of home craftsmen. Below are the design projects of baths, created not by professionals, but by ordinary people:

Steam room design in the bath: a few photo examples

The steam room is the heart of the bath. It should be light and comfortable. Here, as in no other room, special attention must be paid to the choice of finishing material. It must withstand changes in temperature, humidity, not swell from steam. At the same time, appearance is of great importance. For example, if you finish the steam room inside with coniferous wood (pine or spruce), then after several washings the walls will darken, acquire a gray, unsightly shade. And regardless of what protective compounds they were treated with. We suggest that you familiarize yourself with the photo of the finishing of the steam room of the bath inside. Perhaps they will give the reader some thoughts:

The interior of the washing room in the bath: finishing features

A washing room in a bath is a room whose walls are constantly splashed or even jets of water, which means that you need to take care of choosing a material, taking into account this nuance. If we are talking about wood, then larch or linden is used - these varieties are the best suited for such operating conditions. However, the best option would be to finish the floor and walls. tiles. In order to make it clearer how the washing room is finished, pay attention to photo examples of finished premises of this type:

The best photos of finishing the bath inside: shower room or cabin

Today, home craftsmen prefer showers, which is not surprising. They can be installed in the washing room, their installation is simple, such devices do not take up much space. Finishing is done in the style of a washroom, or it is not required at all if the shower cabin is purchased in a store, in a factory version. Below you can see what a shower room might look like in the interior of a bath:

Rest room in the bath - interior design of the necessary premises

Such rooms are designed so that you can take a break from hot steam. The temperature in them is kept cool, which is facilitated by good thermal insulation of the steam room and the location between it and the dressing room of the washing room.

The decoration of the rest room involves the use of various materials - there are no strict requirements for them, as in the decoration of a steam room or a washing room, but the aesthetic appearance is even more important here. Darker tones are used. The ideal wood for finishing the dressing room is bog oak. For example, you can pay attention to the photo of the design of the dressing rooms, the decoration of which was carried out by home craftsmen:

And a few more photos of the interiors of the bath and rest room:

Looking at these photos of the interior design of baths with rest rooms, it is hard to believe that the decoration was carried out by craftsmen without any experience and education of the designer, but this is a fact.

Finishing the locker room in the bath and its features

The locker room is the driest room, and therefore to finishing materials there are no high requirements. Even the use of pine or spruce is allowed - after all, the microclimate here will be similar to a living space.

Important information! If coniferous wood is chosen for finishing the dressing room, you should take care of the outer covering of the lining, block house or imitation of timber. Protection here is needed not so much for wood as for clothing that will come into contact with the walls. Coniferous boards can emit resin drops, which are quite problematic to clean from things. Below are photos of the interior decoration of the sauna, namely ideas for a dressing room in the bath.

Do-it-yourself exterior decoration: photos of beautiful baths

Finishing the facade of the bath is no less important. In addition to aesthetic, it also performs protective functions. Consider examples of the design of the appearance of baths in photo examples:

Conclusion

Summarizing the above information, we note that with the right and thoughtful approach to finishing the bath, you can do it on your own, without involving professional craftsmen. Additional savings are achieved by a thoughtful approach to the choice of material.

If all actions are performed in compliance with simple rules, the steam room will last for many years, will delight with aesthetic appearance for a relatively low cost. But the main thing is the incomparable feeling of relaxation, which gives a rustic bath, heated with birch logs.

And finally, we offer you to watch an informative video clip on the topic of warming the ceiling of the bath.