How to clean a wooden door. Remove grease stains on doors with different surfaces Wipe the door

The door performs not only a protective, but also an aesthetic function. And repair is a “natural phenomenon” within the framework of one apartment, which leaves its mark on the entrance and interior doors. As a result, the door leaf becomes covered with greasy spots, stains, and fades.

To wash the doors after repair, you need to try hard. The choice of cleaner depends on the material of the door leaf and the degree of contamination. In addition to special compositions for washing, improvised means are used that can be found in any home.

Cleaning of iron surfaces

Many people are looking for an answer to the question of when to install doors - before or after repair? Experts recommend installing the front door after work to minimize the degree of contamination. Although for this the canvas can be covered with a plastic film. So, in any case, the decision is yours.

After you have installed the front door, it remains polyurethane foam. The fresh mass can be removed with a spatula, and the residues can be washed off with a solvent (white alcohol, acetone, Profit), a special polish for polyvinyl chloride (Top Clean, Phenozol, etc.).

In addition, a hardened foam cleaner is used for this purpose.

If the foam is dry, then it is carefully cut off from the surface or removed by grinding. Then metal door on the contaminated area, wash with any of the above solvents.

Cleaning plastic and wood surfaces

Plastic and wooden doors have a similar texture, the former are often laminated, and the latter are painted. For this reason interior doors it is not recommended to clean with abrasive powders that scratch their surface. The following products are used to wash them:

Aqueous ammonia solution. Add to 500 ml of warm water 2 tbsp. spoons of ammonia This solution is used to eliminate greasy stains. A solution is also used to wash wooden painted canvases. ammonia, but less concentrated (2 teaspoons of ammonia / 1 liter of water). If strong pollution is present, then the concentration of the solution increases (2 teaspoons / 200 ml of water).
Detergents, for example, Domestos, Profit, Shumanit.
Solvents (white alcohol, acetone) to remove stubborn stains. Aggressive substances must not be used on painted surfaces.
Baking soda. To clean iron surfaces, a soda solution is used, in which a rag is moistened and the contaminated area is wiped. This method is not suitable for washing laminated products.
Ammonia-based glass cleaner is used to remove fingerprints. This product is suitable for washing plastic and wooden cloths.

All of these tools will help clean the door after repair from pollution of varying degrees of complexity. The main rag soaked in the liquid should be kept on the surface for no longer than 5 minutes, then the treated area is wiped with a clean, damp cloth.

Removing grease stains from doors

Grease stains are classified as difficult to remove, and therefore special tools are used to eliminate them.

To clean the iron product, white spirit is used. It's aggressive but effective remedy with a neutral smell quickly removes greasy spots.

To clean wooden doors, use the following tools:

Potato. The raw vegetable is cut in half, the stain is rubbed, and after 15 minutes the traces are removed with a damp sponge. Potatoes are used to clean polished surfaces.
Talc. Sprinkle a damp washcloth with powder, wipe the contaminated areas until the stain disappears. Then wipe the door with a clean dry cloth.
Vinegar. To clean a stained door leaf, soak a cotton swab or soft cloth liberally with vinegar and rub the stain. When all moisture is absorbed into the surface, wipe it with a clean cloth.
Soapy water. To remove fresh traces of grease, add soap shavings to warm water, and then wipe the surface. After that, walk with a damp, clean cloth over the treated area.
Clay with vinegar. Mix the ingredients until a homogeneous slurry is formed, apply the mixture on an oily trail, let dry. Then the remnants of the product are washed off with a damp clean cloth.

Laminated doors are cleaned with alcohol solutions. To do this, water is mixed with alcohol in a ratio of 9: 1. A cotton swab dipped in liquid is applied to the stain and left for 5 minutes.

Then the surface is wiped with a clean dry cloth. To clean laminated doors, it is forbidden to use abrasive particles, aggressive solvents, which include acids and alkalis.

Beautiful glass products are the hardest to clean from greasy stains. This can be done with an aqueous solution of ammonia. To eliminate contamination, mix ammonia with water in a ratio of 1:10, soak a cloth in liquid, rub the contaminated area.

Eliminate traces of fat will help baking soda, which is applied to a damp cloth and wipe the soiled surface. For this purpose, special cleaners based on ammonia are often used.

Other pollution

To wash an iron or wooden surface from whitewash, use warm water and a soft cloth. The product is wiped with a damp cloth until the stains disappear. It is important to change the water as often as possible. From glass white coating removed with a special spray.

Solvents will help remove paint from the door. Stains from the pressed MDF panel will help to remove alcohol, for this the cotton wool is moistened in liquid, applied to the dirt, left for 15 minutes. Then the paint is wiped off with a rag or gently scraped off with a blade.

The glass matte surface has a porous structure into which paint is clogged. Solvents are used to clean sandblasted glass, and the paint is scraped off from a glossy surface with a special blade. Wash off fresh water emulsion with water and a clean cloth.

Remove fresh primer from the door leaf with a damp sponge. For frozen pieces, use a solution of vinegar, glass and tile cleaner, ammonia.

Thus, it is not difficult to clean the doors after repair, the main thing is to choose a cleaner depending on the surface material and type of pollution. To protect the door leaf from stains of various kinds, cover it with a piece of polyethylene or a thick cloth during repair work.

Interior and entrance doors often contaminated with greasy stains. Moreover, depending on the surface, there are a lot of ways to remove such stains. In this article we will try to consider the most popular of them, depending on the type of material of the door leaf or platband.

Since we usually touch doors with our hands, fat is often transferred from the surface of the skin to the surface of the door. And for this, the hands themselves do not have to be oily, since our skin secretes fat on its own. At first glance, such traces may not even be visible, but over time, fat creates real dirty spots, as dust actively settles on it. Also, greasy stains can be from the contact of doors with various liquids, both of a biological nature and with chemicals.

Removal of grease stains from a metal front door

The metal is extremely unpretentious and you can clean it of fat with white spirit or acetone. There are no problems with the purchase of both, but what to choose? Practice shows that white spirit is still acquired more often due to the absence of a sharp characteristic odor, which is very familiar to all of us from acetone. Also, various cleaning powders with abrasive properties are suitable as an excellent method.

Removing grease stains from laminated doors

The laminated door is based on chipboard, or even plastic, which is covered with a paper layer with a pattern, on top of which there is a film. The latter does not have such strength as metal, therefore ideal solution in this case, it will be treated with alcohol, vinegar or citric acid. All that needs to be done is to wipe the stained surface with a cloth soaked in the above liquid, then wait a couple of minutes and wipe everything with a wet cloth. It is best not to delay with this, as leaving such components on the laminated surface for more than five minutes, you risk damaging the coating.

Removing oil stains from veneer and unpainted wood doors

It is worth remembering that the veneer is inherently a thin slice of natural wood. Therefore, it is better to remove greasy stains from it as soon as they appear. In this case, microfiber, which perfectly absorbs fats, is perfect. It is clear that we cannot immediately find out that a greasy stain has formed on a particular surface, so wiping the most endangered places once a week will be an excellent prevention.

But, as a rule, already obsolete fat has to be washed, and in this case two options are suitable:

Ordinary clay is mixed with table vinegar until a homogeneous mass is formed. Then it is applied to the veneered surface and left to dry. Completely dried clay is rubbed off the veneer along with the grease;
Soda and vegetable oil are taken in proportions of 2 to 1. The solution is applied with a soft toothbrush to the surface of the veneer, after which it is washed off with a cloth moistened with damp water.

All of the above is also true for unpainted natural wood doors.

Removing grease from painted doors

In the event that the stain is fresh, it is best to get rid of it with a mixture of water and dishwashing detergent. Old stains are usually removed with vinegar. It is necessary to let the latter soak in, and then wipe it off with the same detergent. To avoid leaving marks, it is best to work with cotton wool or a soft cloth.

How to remove grease stains from a polished surface

If your polished interior door is covered in greasy stains, then potatoes or talc can come to the rescue. The last we just process the door for 20 minutes. As for potatoes, in this case the tuber is cut into two parts and the cut place is rubbed for the same time period.

By removing the talc, we can detect stains at the work site. In this case, the ideal solution would be flour, which we, with the help of dipped in vegetable oil rags will carry out additional polishing.

Lacquered surface - the biggest problems

It is not easy to remove grease stains from a varnished door. Old spots are deeply absorbed into the structure of the varnish, and they can only be removed along with the removal of the old layer of varnish and coating with a new layer. To do this, we do a few things:

Removing the door from the hinges and removing all handles and other fittings;
Covering the old varnish with a layer of wash. A layer of polyethylene is placed on top, after which the impromptu compress remains for several hours until the varnish under it turns brown;
The softened varnish is removed with sandpaper or a spatula;
The remains of the wash are washed off with water and vinegar;
After drying, the door is re-lacquered. Up to three layers can be applied in total.

An alternative to this method of removing varnish is mechanical, when the coating is simply erased from the door leaf with sandpaper. This method is very labor intensive and time consuming.

As you can see, in the case of lacquered doors, which quite often divide rooms in our apartments, grease stains are a very serious problem and it is better to remove them as quickly as possible.

We give grease from glass doors

Glass doors are often used in our apartments. And on their smooth surface, greasy spots remain especially often and stand out quite strongly. In the event that this is ordinary glass, then there should not be a problem. It is enough just to wipe it with a damp or soft (so as not to leave scratches) cloth moistened with alcohol and everything will pass. However, sandblasted frosted glass is a different matter, and it is much more difficult to remove grease from it. In this case, several methods are usually used:

Soap and ammonia based products;
Baking soda, which we will scrub grease stains with a soft sponge;
Alcohol or glass cleaner containing alcohol;
Ammonia mixed with water in a ratio of 1 to 10.

Only with proper and systematic care will your doors be able to retain their original appearance for as long as possible. appearance. Of course, like any other furniture, and especially natural wood products, doors need to be treated with care.

How can you clean wooden doors?

No matter how often you clean the house, no matter how clean you have, these interior doors still get dirty over time. A greasy coating appears on them, since there are always a lot of impurities in the air, dust settles. In any case, you see that it's time to wash the doors. What is the best way to do this?

Of course, there are many special cleaning products in stores, but you can probably do without them. At least it's worth trying. So, you will need ordinary clean water, if this is not enough, then make a weak soapy solution, or add alcohol to the water. Before wiping the door, the rag must be wrung out well.

If just water does not help you, then take a soapy solution. It does a great job with light dirt. If the stains are already quite noticeable on the door, then turn to the alcohol solution. This recommendation will be especially useful to those who have chosen such a solution, i.e. put doors in their house white color. Indeed, on such doors, any pollution will immediately be evident.

It must be remembered that in both the first and second cases, you initially take a soft rag, moisten it in a washing solution, wring it out, wash the door with it, and then carefully wipe it with a dry rag. The door should not sour and get wet. Do not wash the door with washing powder, as well as with any abrasive products. If the method described above did not help you, then it is better to purchase a beeswax polish in the store and clean the door with it. This tool works great for both lacquered and unvarnished wooden doors, while all the dirt simply dissolves and the surface is not damaged. But that's not all, such a polish is able to remove small scratches on wooden surface. It creates a protective film on the surface, which in turn protects the wood from dust, grease, drying out, but also significantly improves the appearance and shine of the door. Yes, the polish is not the cheapest tool, but nevertheless it will last you for a long time, and in terms of quality it is worth it.

Even if your door is outwardly clean and without damage, you still need to clean it at least once a year. This will help keep the door new for many, many more years, and it will bring joy and comfort to you. After all, the door is the same part of the interior, which affects the whole mood in the house, the whole appearance, and is largely able to show the character of the owners.

Keywords: How to clean wooden door,Basic cleaning methods,How to clean wooden doors,interior doors,how to clean,alcohol,water,polish,soap solution,white doors,white doors, color

- an unpleasant occupation, but, of course, useful. In a clean apartment, one breathes easily and is pleasant to the eye. But more and more often it is believed that cleaning is to wipe the dust from horizontal surfaces, interior items, and then wash the floors and vacuum the carpets. But what about the doors? After all, the same dirt settles on them, especially if decorative slats are provided on the canvas, a mosaic pattern or the door itself is textured. A door handles known for their ability to spread viruses and germs? Such cleaning is worthless - the order must be restored correctly!

Basic rules for caring for doors

Now it is rare to find a blank canvas, more and more often the door is a full-fledged element and decoration of the interior of the room, and in order for it to serve for a long time, certain rules must be observed:

before washing the doors, adjust and lubricate the hinges and locks;
the tree does not like humidity more than 65% and temperatures above 24 ° C;
operate the door leaf carefully - not a single tool can mask a deep scratch or a strong dent;
remove fresh stains from the surface without delay;
extend the life of a low-quality canvas can be varnished in two layers;
for the period of repair work, close the doors with polyethylene - this will save time on cleaning.

It is very important to choose the right detergent for doors - natural solid wood and veneer are washed with solutions that differ in composition. The following little tricks are also valid:

glass in door inserts is best washed with cool water with a few drops of ammonia;
metal inserts are washed with a soap solution;
doors are wiped with a soft cloth, good decision will have a separate microfiber cloth for them;
decorative inserts, curly elements and door handles are dusted at least twice a week;
handles and locks, if possible, are treated with a weak disinfectant raster.

Careless handling of the door and insufficient care are the main reasons why the canvas loses its beauty, becomes faded and unattractive.

Detergents

The problem of how to wash the doors is easily solved - the choice of means dictates the material of the array, the type of decorative inserts and the presence of stains.

Universal industrial cleaning solutions include Mister Muscle, various aerosols and sprays. All of them have a convenient spray gun, but require good ventilation in the room. Their advantage is multifunctionality, as a rule, such compositions help both wash the glass and get rid of the “fingers”.

How to remove grease and make the door shine?

When choosing how to wash wooden doors, push off from proven folk methods- simple, fast and safe for family and health. For
it will be enough to wipe the canvas with wet and dry rags, and then polish the door with furniture polish. It is important that the rag is not too wet - natural wood does not like this.

To remove stains, a solution of dishwashing liquid or surfactant formulations is suitable.
A stain or greasy drops can be wiped off with a cut of raw potatoes, and then carefully wipe the area with a damp cloth.
Well helps talc, sprinkled on a contaminated place. Once the powder is saturated with grease, brush it off and wipe the door with a napkin.
A 1:1 clay-vinegar mixture will remove not only grease, but most types of stains. To do this, cover the stain with gruel and, after waiting 20-30 minutes, wash it off. If necessary, the procedure must be repeated.
To give the entire canvas a gloss, apple cider vinegar (1 tablespoon per liter of warm water) can be added to the washing water.

All solutions and compositions applied to the surface must be washed off with clean water, and the door is wiped dry! In no case should you use metal washcloths or abrasives - the surface is guaranteed to be damaged.

How to wash the glass in the door?

Housewives often puzzle over how to wash combined-type interior doors? By all the same means as wood, but glass deserves special attention. First, the stained-glass window is put in order, and then the canvas. Smooth glasses are wiped off with ordinary napkins made of soft, lint-free fabrics, textured glasses with a frosty effect are better washed with a brush.

If the surface texture implies a pleasant haze, then starch should be sprinkled into cool water (2 teaspoons per 500 ml).
If greasy stains are found on the glass during the washing process, they can be removed with dishwashing liquid or onion juice.
, tea or glue will be perfectly wiped off with alcohol, acetone (thinner) or nail polish remover. It is important to ensure that chemical substances in the process of work did not get into rubber seals box or leather.

Remember that frosted glasses are afraid of acids, alkalis, concentrated ammonia and gasoline. Do not try to scrape off pieces of dirt or silicone with a knife or scraper.

How to mask defects?

Minor defects and cracks can be hidden by polishing the door or using a beeswax spray. For deep scratches, special wax pencils are available, available in a wide range of shades. They are rubbed at the site of the crack, filling voids with substance.

Caring for doors and timely removal of stains does not require huge costs, but as a result, clean and beautiful, they will delight you for many years!

Beauty and comfort indoors and out depends not only on the interior, but also on the cleanliness of the doors. Every housewife should know how to wash the doors correctly.

What to pay attention to

Doors are different: interior, entrance, made of various materials, therefore, it is worth paying attention to the following main points:

If the door is made in the form of a monolithic structure, then dust and dirt on it are less noticeable. If there are decorative elements in the form of glass, metal or plastic inserts, then the problem of dirt becomes noticeable not only upon close inspection.
The color of the door is also important, since on light surfaces fingerprints and other stains are more noticeable than on a dark canvas, and they have to be washed more often.
Eco-veneer products are less practical, as any contamination on them is very noticeable.

In order not to have to spend a lot of time washing the doors, it is important to provide them with the right care:

Not only the door itself needs care, but also the fittings. They need to be cleaned periodically so that the mechanism lasts long enough. If a creak is heard, you need to lubricate the fittings.
If the door is made of natural solid wood, then first of all it is necessary to ensure a comfortable indoor climate so that the door does not lose its attractiveness and works properly. The maximum temperature in the room is 25 degrees, the humidity should not rise above 70%.
It is necessary to carefully operate the doors, as scratches, dents and other troubles cannot be hidden.
If you find dirt and stains of fresh origin on the door, then you should not be lazy, it is enough to immediately eliminate the trouble so that after that you do not have to deal with stubborn pollution with the help of various means.
If you started a repair, then be sure to cover the interior and exterior doors with polyethylene. This measure will allow you to get rid of unnecessary work.

Among the materials used for the manufacture of doors, the following are popular: PVC, eco-veneer, laminated options, natural veneer, solid wood. Every material needs proper washing.

The detergent is selected depending on the base material of the product. Today you can buy universal detergents for various surfaces.

Washing wooden doors

Natural wood products can react negatively to prolonged and abundant exposure to moisture, so it is recommended to use the dry cleaning method or wipe them with a damp cloth.

To wash a wooden door, you will need to follow a number of simple steps:

In the prepared dishes, collect the required amount of warm water, add detergent to it. You can use shampoo or dishwashing detergent.
Be sure to wear rubber gloves so as not to harm the skin of your hands.
With a damp cloth, treat the surface of the product on both sides.
Rinse with clean water, wipe the product with a napkin.
Let dry and apply polish. This measure will protect the product from contamination.
Wipe the handles thoroughly so that there are no greasy stains on them.

If stains remain on the door, then you can remove them with ordinary talcum powder. Pour a small amount of the product on the problem area, leave in this position for 20-30 minutes, then remove with a soft brush.

This method of washing is also suitable for products made of natural veneer.

How to clean a laminated door

Even a beginner will be able to wash the laminated surface, as the material is resistant to moisture and detergents. Dishwashing gel can be used, alcohol and water can be used. It is important to avoid the use of hard sponges.

Pour warm water into a basin or bucket, take a soft, lint-free cloth and proceed to remove dirt. It is important to process the fittings with a brush.
Rinse the product, then dry thoroughly with a towel or a special cloth until dry.
After polishing.

How to clean a metal door

Metal doors are commonly used as input structures. These doors have to be washed less frequently than interior doors, as they are less likely to get dirty.

To wash a metal door, it is enough to follow simple recommendations:

Take warm water in a suitable bowl.
Add detergent. It must be liquid, as abrasive particles will damage the surface. You can use a classic soap solution.
Using a sponge or cloth, thoroughly rinse the door and fittings, rinse and wipe to dryness.
Do not use coarse brushes.

How to clean a glass door

When washing doors tempered glass you need to follow the following tips:

If the product has complex types of dirt, it is recommended to use alcohol, acetone or nail polish remover to remove them.
You can clean frosted glass with a soft brush.
Dishwashing liquid will help get rid of stains on frosted glass.
The ideal choice of cloth for cleaning is a cloth made of microfiber, as it does not leave streaks and does not harm the surface of the products.
In order for the door to keep a clean appearance for as long as possible, it is recommended to wipe the handles regularly.
For perfect care, it is recommended to use disinfectant for processing door handles.

Sequencing:

Pour water into the prepared bowl room temperature, you can drop a little ammonia into it.
Thoroughly clean the surface with a soft cloth.
Rinse it with clean water, wipe dry.
If on glass door metal elements are present, they must be washed with soapy water.