Put the lock handle on the interior door. Installing different types of door handles: step by step instructions. Installing a door handle on an interior door

It is difficult to imagine how to use an interior door without such a mandatory attribute as a handle. At first glance, its installation may seem complicated. However, with a serious approach to the problem, the presence necessary tools and materials and proper organization of work, you can cope with the task yourself. In the presented material, we will consider how the handle is installed on interior door.

Handle types

There are several types of handles that are suitable for inserting into an interior door:

• rotary;
• with a pressure mechanism;
• without locking mechanism.

Stationary handles, which do not have a mechanical part, allow you to open the door by pulling on yourself. As for pressure systems, the latter have a shutter in the form of a lever. In the process of pressing such a handle, the lock tongue slides inward, which allows you to open the door.

What is an interior door lock with an oval handle? Installing such a system allows you to open the door without pressing the lever. Due to the round shape of the handle, the operation is carried out by turning the holder. The design may be provided with a lock button, which allows you to fix the tongue of the locking mechanism. Thus, you can lock the interior door from the inside.

Tools and materials

What does the installation of handles on interior doors require? During self-assembly the following may be needed:

• pencil;
• hand or electric drill with a nozzle in the form of a pen drill;
• screwdriver;
• chisel for woodworking;
• hammer.

Interior door handle installation height

Before you insert a lock into an interior door, you need to decide on the choice of the optimal location for placing the handle. To do this, it is enough to simulate the opening of the door, to think about what height is most acceptable for each individual user. As practice shows, the right decision is to install the handle on the interior door at a distance of at least 1 meter from the floor plane. The presented footage looks optimal for both adults and children.

Cutting a hole for the handle

Having found the necessary tools and determined the location of the structure, you can proceed directly to creating an opening for mounting the mechanism. First you need to mark the height of the future handle on the door plane and its end part. This is required to determine the exact location where the opening for the double-sided structure will be made.

In order not to make mistakes in the calculations, it is enough to take the latch mechanism, and then measure the distance from its eyelet to the visible edge with a tape measure. The parameter must be marked at a preselected height on the door leaf. As soon as the appropriate markup is made, you can proceed to the selection of a suitable crown for drilling holes.

Having completed the openings, you need a diameter on the plane and the end of the door leaf, here it is necessary to attach the opposite parts of the handle design. If the thickness of the plane does not allow assembly of the product, excess wood should be removed using a chisel. Next, you need to strip the canvas on both sides until the handle fits snugly into place.

Latch mounting

After completing all the preliminary work, it is necessary to position the latch in the prepared hole. handles on the interior door involves screwing it to the door leaf in the prepared opening using fasteners that are included with the product. It is convenient to perform the work using a screwdriver. However, in the absence of the latter, you can use a regular screwdriver.

After strengthening the lock part of the structure, a core is built into it, which is strengthened thanks to the screw, long part. In order not to have problems with the installation of the core, it is necessary to first insert the key into it by moving the locking tongue of the mechanism to the closed position. Only then should the screw be tightened.

Installing a door handle on an interior door

Directly inserting the handle into a previously assembled structure is the simplest stage of the work being done. Here it is enough to insert a square-shaped rod into the corresponding opening of the locking mechanism.

The next step is to fix the handle with fasteners on one side of the door. To do this, you can use self-tapping screws or use screeds. As soon as the first handle is successfully mounted, it is necessary to do similar operations with another part of the structure, which will be placed on reverse side door leaf. Thus, a connection will be established between both elements of the system.

Mounting the plate for the entry of the lock tongue into the door frame

In order for the installation of the handle on the interior door to be considered complete, it is necessary to make an appropriate hole for the entry of the locking part of the locking system into door frame. To prevent an error in the calculations, applying toothpaste to the tongue of the mechanism along its vertical edge will allow. When closing the door leaf and releasing the handle, the locking element docks with the box part. The remaining mark from the toothpaste will tell you where to make a hole for the tongue.

Using the above method is the optimal solution for determining the correct location of the sheer plate. Despite the primitiveness of the method, even experts resort to it.

The formed imprint from the protruding tongue of the door latch must be drawn with a stable contour using a pencil. Next, you should use a drill and a chisel, with which a hole will be made for the entry of the locking pawl, and then a metal plate with an opening. Previously, it will also be necessary to make openings for fasteners to fix the plate on the boxed part of the door.

After creating all the necessary holes, it is enough to attach the plate to the corresponding area. To fit snugly to the box, the metal element must be firmly screwed to the wooden surface.

Finally

So we looked at how the handle is installed on the interior door. This material provides an example of how to embed a simple mechanism into a wooden plane. Now you have enough knowledge to cope with the task on your own, without resorting to outside help.

This article will help you figure out how to embed a latch handle into a door leaf. Adhering to the work algorithm described in the article, you can easily do this operation yourself, with a minimum set of tools and very quickly.

No door is complete without a handle. The most popular type of interior door handles today is the latch handle.

The design of handles of this type is such that, regardless of their appearance, they are all installed in the door leaf in the same way. How to do it yourself will be discussed in this article.

Latch handle design

The pen itself, that is, the visible part of it, may look completely different. So:

or like this:

All these latch handles consist, in fact, of two parts - the handle itself:

and latch mechanism:

Both parts of the latch handle require a separate insert into the door leaf.

Latch handles are available without a latch - the door with such handles is not locked from the inside, with a latch - an additional rotary mechanism installed on the handle and allowing you to lock the door from the inside, and a key - on one side of the handle there is a turnkey mask that allows you to lock the door from the outside, on the other, a latch . All handles have design differences that do not affect the tapping process. Inner part(latch) is also the same, that is, it cuts in the same way for all types of latch handles.

So let's get started.

Required Tool

To make the installation of the latch handle as easy as possible, you will need:

1. Hand drill or screwdriver.
2. Crown on a tree with a diameter of 50 mm.
3. Drill for wood with a diameter of 23-24 mm.
4. Chisel.
5. Hammer.
6. Pencil.

The crown and drill can be bought separately, or as a set, which is called the “Set for inserting latch handles”.

Installing the latch

1. We begin the installation process by marking the door leaf for drilling. The marking scheme, as a rule, comes with the handle.

If there is no scheme, then you can mark it manually. To do this, put a mark at a distance of 60 mm from the edge of the door.

2. On the side edge of the door along the axial marking line, mark the center for drilling.

3. Using a chisel, we hollow out a three-millimeter recess under the front latch plate. It makes sense to pre-mark the center with an awl so that you do not have to mark it again.

4. We drill with a crown with a diameter of 50 mm through hole. It is better to do this on both sides of the door in order to avoid damage to the door covering at the exit of the crown when drilling.

5. As a result, we get such a hole:

6. Go to the side edge. With a drill for wood with a diameter of 23-24 mm, we drill a hole for the latch into the marked center. You should not make it too deep, otherwise you risk drilling the door through to the panel.

7. We already get two holes.

8. Install a latch in the side hole and screw it with self-tapping screws.

9. Remove the top of the handle. To do this, we are looking for a hole on the side.

Using the supplied key or any other thin flat object:

press the tongue inside the hole:

and remove the handle itself:

10. Remove the decorative trim and, thereby, open the mounting holes.

11. Insert the outer half of the handle.

12. Insert the inner half. We tighten both with the screws that come with the kit.

13. We put on a decorative overlay and a handle body. Do not forget to press the inner tongue with the key.

14. When closed door we mark the place where the tongue of the door jamb latch touches, after which we hollow out a recess under the latch tongue in the resulting place.

15. Insert a decorative plastic pocket.

16. We fasten the metal plate.

17. The handle is installed.

If there is no drill, then all holes can be made using a suitable chisel, however, in this case, installing the handle will require more serious repair and construction skills and can be an impossible task for an unprepared person.

Putting a latch on the door or embedding a lock is not so difficult. If you have a tool (nothing extra expensive or unusual is needed), you can manage it in 30-40 minutes. And that's without experience. About how to embed a lock in an interior door and how to install a latch, and we will talk further.

Tools for tapping locks and latches

Embedding a lock in an interior door is not so difficult, but you will need tools to work:

Not so expensive and rare tool. If you do not have a drill and a crown, you can buy it at any building supermarket or on the market. Since we will not be drilling a stone, there is no need to buy too expensive ones - ordinary crowns or wood drills.

Ready-made set for inserting locks into interior doors (for wood): feather drill, holder, crown

A few words about what is better - a crown or a feather drill. It is easier and faster to cut a hole for the lock in the door with a crown, while there are fewer chips. But at the end, working with a crown is far from being so convenient, and the hole turns out to be larger than necessary. Drilling with a pen takes a little longer and there are more chips, but it is easier to control the process. In general, there is not much difference, but most often, a hole in the canvas is made with a crown, and at the end with a feather. But you can use the pen everywhere.

Another point: the standard crown has a diameter of 25 mm, and a hole of 22-23 mm is required for the lock. The extra 2 mm are easily covered by decorative overlays, but with a very narrow door, these extra millimeters can become critical.

How to embed a lock in an interior door: step by step photos

Before installing a lock or latch, you need to decide on the height at which the handles will be located. The recommended height is 90-110 cm. In this gap, they usually put a lock or latch. But when the lock is inserted into MDF doors, you should not put the castle above a meter. The fact is that in budget models, the wooden plank into which the lock is installed has a height of 1 meter. There will be only emptiness above and you will have to re-drill the hole and figure out how to close the resulting hole. After we have decided on the height, we can begin the installation.

Notch under the lock

Before inserting the lock into the interior door, mark the selected height on the door. Make it easier with a tape measure. We put a mark on the end, transfer it with the help of a square or building level to both sides of the door leaf.

1. We take the lock / latch, apply it to the end of the door so that the middle of the lock falls on the drawn line. We mark the width of the metal locking part and the level at which the overlay ends.
   
2. We take a 16 mm feather drill, apply it to that part of the lock that will be inserted into the door leaf. Using a marker or masking tape, a piece of electrical tape, make a mark on the drill. This mark should be a little further than the castle. We will be guided by it to what depth to make holes. This is especially important if the lock is installed against the glass. Otherwise, you can drill too deep and damage the glass.

   

   We put a mark on the pen drill - this way we will control the drilling depth

3. Having installed the pen drill, we make several holes one under the other, forming a notch for the lock. The number of holes depends on the size of the lock. In some models, 4-6 is enough, in others 8-10 will be needed.
4. The edges of the holes turned out to be uneven, in addition, the wood rose in places. We take a chisel and remove protruding wood fibers from the edges, slightly working in depth (but do not get too carried away).

   

5. We take a regular 16 mm drill, put it in a drill. With it, we align the edges of the hole made. To do this, we bring it up and down, pressing it slightly to one or the other side of the notch. This operation is needed to speed up the process, but the drill must be tightly controlled. If you are not sure, it is better to level the notch with a chisel and a mallet.

   

6. We insert the lock into the resulting hole. It is usually slightly larger, so there is no problem. If necessary, using a chisel or drill, it can be increased to the desired size.
7. We set the lock to the desired position, fasten it with two self-tapping screws (one at the top, the other at the bottom) to the door leaf.

   

8. Using a pencil or a clerical knife, we circle the lock pad around the perimeter. We remove the lock, take a chisel and remove 1-2 mm of wood, MDF or veneer inside the markings made.

The depth of the notch under the lock part depends on the thickness of the decorative strip. Usually they try to make the bar flush with the end of the door, but it may protrude a little. Shoot little by little as you work - it's easier to modify than to try to restore what was shot.

We put handles

To complete the installation of the lock in the interior door, it is necessary to make holes for the installation of handles. The work is much less than what has already been done, but accuracy is needed. Mistakes are not too critical, although it is better to try not to make them.

Self-tapping screws are included with the handles. wooden doors and tie bolts for installation in metal door. It is better to replace the self-tapping screws from the kit - they are usually made of soft metal. Unless you bought a branded foreign constipation, in which the self-tapping screws are hardened. And so, buy some good self-tapping screws with a diameter of 1.5-2 mm and a length of about 1 cm.

Some models have decorative overlays. We align them with a square.

Installing the latch

Locks for interior doors usually have a rotary latch (wrapping) on ​​one side that locks the lock, on the other side there is only an overlay with a slot. That is, you can’t just open the door from the outside - you need a special key. Installing this part of the castle takes just a couple of minutes, but there are nuances.

Everything, the insert of the lock into the interior door is almost finished, it remains to check the work.

Counterpart insert

The counterpart must be installed clearly so that the doors do not play and there are no problems with closing. Therefore, we try to mark as accurately as possible and take a sharply sharpened pencil.

You know everything how to insert a lock into an interior door. The description takes up a lot of space, the process itself takes 25-30 minutes if you are doing it for the first time. It will take more time if you level the holes with a chisel, and not with a drill. But the total duration will still not be more than an hour.

Latch installation features

A full-fledged lock in interior doors is not often installed. More often you have to put a latch - a handle with a tongue. It is smaller and embeds it much faster and easier.

Putting a latch on an interior door is even faster and easier than a lock. There is very little work. You can do it in 20 minutes. And this is completely without experience.

Installing door handles with your own hands is a simple process, but it requires certain knowledge and accuracy when doing the work. In this review, we will look at the three most common types of pens and understand the advantages and disadvantages of each of the options. We need to choose optimal solution and install it according to the instructions below.

Currently, there is no shortage of pens, the choice is so large that it can be a problem to determine the most suitable option.

1. Stationary;
2. Push;
3. Swivel.

Stationary handles

The oldest type of product that has been used for thousands of years.

First, let's look at their main advantages:

• Simplicity. There are no elements in the design other than the handle itself and the mounts. Thanks to this, installing such options is much easier than any other. The set of door handles includes only handles and fasteners, which is also important, because you do not have to assemble an ingenious mechanism and figure out how to set it up and install it correctly;

• Reliability, due to the simplicity of the design and the absence of moving mechanisms in it, there is simply nothing to break in such products. The only problems you may encounter are damage to the coating over time or loosening of fasteners if the handle is pulled frequently. It is possible to break such a structure only if it is made of low-quality material;

• Classic look. Such handles belong to the classics, therefore they are widely used in the arrangement of the corresponding interiors. Very often they are made in a luxurious style and covered with compositions that imitate patina or precious metals.

Forged versions are also common, they can also be very, very skillful;

• Ease of installation. Fixing the door handle is within the power of any person - you just need to determine the location of the products, align them relative to, after which the self-tapping screws that come with the kit are screwed in;

• Various manufacturing materials. You can purchase products made of steel, brass, bronze, aluminum, plastic and composite materials. Wood stands apart, very authentic and unusual handles are obtained from it, very often precious wood is used for their manufacture.

Of course, there are also disadvantages, the main ones are:

• No locking mechanism. To close such a door, you need to install either a spring latch or a latch, and this is not always convenient. That is why such products are used less often than others and are most often placed in country houses, baths and outbuildings;
• Small selection. Although the range of this product group is rather big, only a few types of pens are usually found on sale. Most often you have to buy suitable options under the order and wait for delivery for some time.

rotary knobs

This type of product is quite common, and its main feature is that the door opens by turning the outer part.

This is a fairly simple and convenient mechanism, let's analyze its main advantages:

Note! The round shape of the handles has several names -. The difference between them lies in the presence of a locking mechanism, which is activated by turning the handle itself to the left or right. The handle-button does not have it, therefore it belongs to stationary views.

• Interesting appearance . Most often, handles are spherical or cylindrical in shape and look good on doors. There are many options for execution, so picking up something for your doors is usually not difficult;
• Availability of original designs. They themselves are an adornment of any interior and can have a wide variety of colors or patterns on the surface - there are even crystal options, their price is high, but their appearance is luxurious;
• compactness- This option takes up little space and is well suited for limited space. In addition, the mechanism is also compact, which greatly simplifies its insertion into the door leaf;
• Safety. If you hit such a handle, then the likelihood of injury is low, unlike push options. Therefore, such products are often put by those who have small children.

Now let's deal with the disadvantages of rotary knobs:

• Low coverage reliability. Due to active use, the decorative layer begins to collapse, which worsens the appearance, and the accessories for door handles are not sold separately, and you will either have to use peeled products or change them to new ones;

Advice! As practice shows, chrome-plated products are much more reliable options in gold and bronze. Keep this in mind when choosing a specific solution.

• Poor workmanship. Most of the products on the market are not very reliable and durable. Repairing door handles is not a pleasant occupation, and spare parts are not always available, especially if you have some unusual option. In order not to have problems, try to choose products from those manufacturers that are widely represented on the market, at least there will be no problems with repairs;

• Impossibility to install other types of handles. If you decide to put a rotary option, then keep in mind that during installation you will have to cut a large hole in the door leaf. After that, putting a lever or another option will not work, you will have to constantly put the same type of structure.

Push handles

This is without a doubt the most popular and common option, which is found literally everywhere. It consists of two L-shaped handles connected by a square, with which the door latch opens when pressed.

As for the main advantages, they are as follows:

• Ease of use - opening and closing doors is very easy, and if rotary options you need to move your hand, then the pressure ones can be opened with your elbow if your hands are busy. Most often, the handles are ergonomically shaped, which is also important, but to appreciate the convenience, it is better to buy products where there are showcases for door handles so that you can hold on to them;

• A huge range of products, you can find options for all kinds of colors and designs. You can decide for yourself which color of door handles to choose, which significantly expands the possibilities of decorating the room. There are budget options, and the middle segment of the premium product, everyone will find a suitable solution;

• Maintainability. Most often, the mechanisms are interchangeable, so there are usually no problems with repairs. And in terms of reliability, this option looks preferable to the one described above, since the lever unlocking system is more wear-resistant and durable.

It should be noted that such products are of two types:

1. Socket handles. Mounted on a small base, under them you can use different locking mechanisms. If a latch or lock is needed, then an additional socket is placed below, it has the same coating as the main element;

1. Handles on the bar are more often used on input structures, but there are also options for interior doors. In them, the base of the handle is a bar, in the lower part of which there is a keyhole or latch.

Of the minuses, one can only single out a more complicated installation process, since the work requires accuracy, and any errors can lead to damage to the door leaf.

Description of the installation process

Now let's figure out how to put the handles yourself. Two options will be considered - rotary and pressure structures. There is no point in disassembling stationary ones, everything is simple there - you determine the installation location, and screw it on.

Installation of rotary handles

To get started, you should stock up on everything you need.

Naturally, you need a set of door handles, the following tools will also be used:

• Feather drills;
• Drills for wood or metal;
• Hammer;
• Chisel;
• Screwdriver;
• Roulette, pencil and square;
• Drill;
• Wrench;
• Crown on wood.

Installation instructions for door handles of a rotary type look like this:

Illustration	Description
	The location of the element is determined. European standards for door handles and domestic GOST prescribe a height of 1 meter, it is considered convenient for a person. Therefore, first of all, draw lines a hundred centimeters from the floor.
	Your lock is taken, and markings are made on the door leaf. It makes no sense to give specific recommendations - it all depends on the model and size of the pen. Read the instructions, and everything will immediately become clear to you. Usually you need to drill two small holes for the through fasteners, and one larger one for the mechanism. Advice! It is better to drill half the thickness of the web on each side, this is the most accurate way.
	After finishing the work, you should get something like this - a large hole in the middle and two small ones on the side. The main thing is to ensure that drilling is carried out on the same line. Otherwise, an offset will result, due to which installation can become very complicated.
	If you can purchase a special template for inserting door handles, then the work will be greatly simplified. You will need to set it at the required height, fix it on the canvas and drill holes in the right places. No measurements and no error. But templates are not suitable for all pens, so check in advance if this system can be used in your case.
	A hole is also drilled under the core, its diameter is usually 25-27 mm. It is important to find the middle at the end of the door leaf and keep the drill strictly horizontal during operation. If anything, you can make certain edits, the main thing is not to move the hole too much.
	sidebar door hinges and handles is impossible without sampling the grooves for the elements, in our case it is necessary to make a recess under the latch platform. To do this, the mechanism is placed in the hole, and its outer part is outlined along the perimeter. Then, using a chisel, a layer of wood about 3 mm thick is removed. First, punch the material around the perimeter, and then remove layer by layer until you get the desired result.
	In the process of sampling the recess, constantly check how the latch becomes. It is better to do it once more than to overdo it and shoot too much. The work is simple, but painstaking, it is important to do everything as carefully as possible, the appearance of the structure depends on it.
	After the latch is perfectly in place, it must be fixed with the screws that come with the kit. Tighten them carefully so as not to turn the fastener in the material and thereby weaken it.
	The design of the handle is divided into two parts, one of them will have mounting bushings, which is what we need in the first place.
	First, a part with bushings and a square is placed under the latch. It must be carefully positioned and pressed firmly to make sure that everything is in order and the socket fits snugly against the door leaf.
	The handle is placed on the other side, the holes on it are combined with the bushings. Then two coupling screws are screwed in, which will hold the structure. The work is almost finished, but most likely you still have spare parts for door handles, namely the counterpart and fasteners for it. Let's figure out what to do with it.
	Close the door and note at what level the latch is located. Then attach the counterpart according to the marks and mark the place where you need to drill a recess for the tongue. Lastly, the bar is screwed to the door, this is the end of the job.
	The photo shows what a properly assembled structure looks like. Everything is neat and safe. The door can be used.

Installing lever handles

Now let's deal with this option. Naturally, the technology can be different, since the production of door handles is established in many countries and everywhere there are standards. We will analyze the most common latch option, which is great for interior doors.

Illustration	Description
	Marking work is being done. We said above that standard height the installation of door handles is 1 meter, although you can arrange them as you like, it's all up to you. With the help of a tape measure, a clear mark is placed.
	To clearly mark the door on both sides and from the end, the easiest way is to use a construction square. It is pressed tightly against the edge of the canvas, after which a line is drawn. So you will achieve perfect marking accuracy on both sides of the door leaf.
	Now you need to decide where to drill a hole for the latch square. To do this, the latch is applied to the door so that the drawn line is in the middle of the square hole. Keep in mind that the mounting plate will sink into the surface, so position it flush with the end of the door. Do the same for the other side of the door.
	This is how your result should look like. There is no need to chase the accuracy of the markup, it is important to determine exactly where the center of our hole will be, anyway we will make it a little larger than the size of the tetrahedron so that the element can move.
	A hole is made using a drill or screwdriver. For work, a drill with a diameter of 12 mm is used, you can take the 10 mm option, but then you have to slightly drill the hole so that a tetrahedron enters it. The work is done as follows: first, on one side, you need to go deep by about half the thickness of the canvas, then the same is done on the other side, and then you can go through. This is the most accurate way, if you go through on one side, then there is a high probability of displacement.
	This is how the result of the work looks, everything is clear and even. Make sure the square fits and can spin inside.
	Now you need to mark the end for the core. To do this, a tetrahedron is inserted into the hole, a core is put on it and marks are made from above and below. Next, you need to mark a point strictly in the middle of the canvas, this will be our main guideline in the first stage.
	First, a hole is drilled in the middle. Any suitable drill is used for work, but usually a thicker option is taken so that later there is less work to expand the recess with a chisel.
	Since the core has a rectangular or square shape, the hole for it is completed with a chisel. Just knock out a recess according to the required size to the desired depth. This is perhaps the most time-consuming and lengthy stage. It's simple, but it takes a lot of time.
	After the hole is made, the latch is inserted and a notch is marked, which must be made for recessing the mounting plate. Everything is simple here: align the element so that it is parallel to the door leaf and carefully draw lines around the perimeter.
	In order not to remove the excess when removing wood, first of all, you need to cut through the material along the perimeter to a depth of 3 mm. It's simple: the chisel is attached to the surface, after which it must be hit 2-3 times with a hammer. And so around the perimeter.
	The removal of wood is carried out carefully and little by little - a little tweak later is easier than removing too much. Periodically insert the latch to control where and how much to remove. If necessary, you can cut the tree around the perimeter again.
	Next, you need to make holes for the fasteners. They must be through, as the handle is pulled together with special fasteners. Measurements are made and holes are drilled at the required distance. Everything is done here, as in the case above: work is done on both sides at half the depth of the door leaf.
	The core is fastened with two screws, after which you need to check its performance. Insert the square and turn it, the latch should move with little resistance.
	The handles are aligned along the holes, after which special screws are screwed into them, they enter the sleeve and securely fix the structure on the canvas.
	For reliability, it is screwed into the handles under two more self-tapping screws. They are included in the delivery.
	Last of all, decorative covers are placed on the sockets, they cover the fasteners and give the handle a more attractive look. This completes the work, it remains to put only the counterpart, this process is described above, it makes no sense to repeat here.

Conclusion

Now you all know about the types of door handles and how to install them. As you can see, putting the handles is not as difficult as it seems at first glance. You must follow all the recommendations and do everything very carefully. The video in this article will help you understand the issue even better, watch it if you are going to do the work yourself.

Interior doors are sold without fittings. Therefore, the purchase and installation of door handles is carried out separately. To do this, you can use the services of a carpenter or insert it yourself.

Types of door handles

When choosing accessories, you need to know what types of handles are, and how they differ from each other. The variety offered in stores allows you to choose them for the style of the room and ensures ergonomic use. Depending on the installation method, products are divided into two classes:

• invoices;
• mortise.

Overheads are attached to the surface and, as a rule, there are no difficulties with them. And mortise require pre-training holes in the door leaf.

Mortise products can be of two types:

• Rotary, they are also called knob knobs, which, when the handle is turned, open or close the latch that holds the interior door closed. In most cases, they are made in the form of a ball or disk.
• Pushers work on the same principle as rotary ones, only the mechanism is activated by pressing the handle. As a rule, they are sold together with a lock or latch, hence another name for them - lever latch handles. Fittings with a push mechanism are widely used for both interior and exterior doors.

Which type of product is better to choose depends only on your preferences. You should also consider the style of the room. Designers advise buying them for all doors in the same room the same.

The height at which the door handle should be is not clearly fixed by any standards. On average, it is located at a distance of 1 meter from the floor. This value can fluctuate up or down depending on your preferences. It may also depend on the height of those who will constantly use the door. When installing, you can build on the level at which other handles in the room are located so that their height is the same.

Tools

In order to insert a handle into an interior door, you need to have a certain set of tools. It includes:

• tape measure, square and pencil;
• chisel;
• screwdriver, drill;
• drill, crown.

Using all the necessary tools greatly facilitates the work process. It is quite possible to embed fittings without a screwdriver and crown, but in this case, the work will take much longer.

Fittings are ideally installed when the canvas is removed from the hinges. If this is not possible, then you need to securely fix it in order to qualitatively and evenly perform marking and tie-in.

Before starting the tie-in, carefully study the instructions for the door handle. All sizes are listed there, and you will know what diameter of the crown and nib you need for work.

The instructions below will help you put the handle on the door leaf and avoid mistakes. And for those who first encountered such a case, it will be useful to watch a video on this topic in order to have a visual idea of ​​\u200b\u200bthe upcoming installation work.

Step-by-step instructions for installing a door handle

1. Canvas marking.
2. Drilling a hole for the handle and lock.
3. Lock installation
4. Handle notch.
5. Luke marking.
6. Cutting a groove in a hole

Let's pay special attention to each stage of work, analyzing it in detail.

Web marking

Installation begins with markings on the door leaf. First you need to decide what height will be chosen for the location of the handle. With the help of a square, tape measure and pencil, places on the canvas are marked in which holes need to be made. To do this, we measure the required distance from the floor and draw a horizontal line with a pencil, first on one side, and then transfer it to the end and the other side.

At the end in the middle of the drawn line, we mark the place where a hole will be made for the lock tongue. On the same line on both sides at the same distance from the beginning of the canvas - this is usually 60 mm - we mark the places where the handle itself will be inserted.

Drilling a hole for the handle and lock

Using a drill and a crown, we make a hole for the door handle. You need to check on each side of the canvas to a depth of half the thickness of the interior door. For convenience, experts recommend making a mark on the outside of the crown with a marker. First, on one side, we drill to the required depth, and then on the other until the drilling is complete. This is done so that the crown does not go to the side and so as not to damage the appearance when selecting material for fittings. You need to hold the drill at an angle of 90 degrees and not allow it to deviate either vertically or horizontally. With the help of a chisel, we smooth out all the bumps.

We make a hole for the lock with a drill and a pen. Work should be carried out carefully, since the distance between the pen and the corner of the butt is not at all large.

Some experts prefer to first make a hole for the latch, and then for the handle. In what order you will do it does not matter.

Lock installation

To install the lock, it must be inserted into the corresponding hole. Overlay, apply on top and circle it around the perimeter with a pencil. Now you need to use a chisel to select the material to a depth equal to the width of the lining in order to drown it in the canvas. For convenience, you can use several chisels of different widths.

The trim is attached to the door with screws. Holes for them are recommended to be made in advance using a thin drill, attaching an overlay and marking the right places with a pencil.

Handle inset

There are products in which the screws are outside. You don't need to parse them. Putting one part in place, you need to get into the holes of the latch with two guides, in which threads for bolts are provided. Then you need to attach the second half and tighten with bolts. You need to twist them evenly so that the handle works well and the latch easily returns back.

Products in which screws are hidden must be disassembled. Included with them are instructions and a key for disassembly. The handle can be easily removed if you find a stopper on it and press on it with a key. The collapsible part is bolted, after which the handle is put in place. Don't use force, assembly should be easy if you do it right.

Loot marking

After installing the handle, you need to make an appropriate hole for the tongue in the loot. Therefore, first of all, it is important to correctly mark the door so that the door closes well and the lock enters the groove without effort and friction.

We close the interior door and mark the top and bottom of the tongue with a pencil on the loot. Using a square, we determine the exact middle of the castle and mark this value on the loot. We make a hole with a drill and a pen and remove excess material with a chisel.

Cutting a groove in a hole

Before screwing the trim, it is important to check how the door closes. This will allow you to be sure that the groove for the tongue is made correctly and there will be no difficulties during operation. When closed, the door should have a slight play, that is, it should stagger a little. This is necessary because the thickness of the latch striker metal will be added to the groove.

The strap is fastened flush with the loot. To do this, as with the installation of the castle, it must be drowned in the loot to the required depth.

A slight play may remain even after you have screwed on the pad. This defect is easy to fix. The striker always has a tongue with a small hole for a screwdriver. It is designed specifically to bend it. Using a flathead screwdriver inserted into this tab, you can adjust the doors by bending it slightly.

The entire described process can be clearly seen on the video on fitting fittings into interior doors. The installation of the handle can be considered successful if it turns easily and the latch enters the groove without friction and effort.