Fastening the apron in the kitchen made of plastic. How to fix a plastic apron in the kitchen? Mounting on the crate is a reliable option

Apron or protective screen- an extremely useful tool. It's no secret that soot, steam, temperature changes, condensate quickly destroy Decoration Materials and markedly limit their choice. A glass, plastic, ceramic panel near the stove and worktops prevents damage to materials and prolongs their life.

Attaching the apron to the wall is the easiest. The sheets are cut to size, given that the distance between the desktop and the wall cabinet and between the stove and the hood is different. Then glue is applied - along the perimeter of the sheet and in strips across the entire width at a distance of 20–40 cm. It is best to use “liquid nails” as glue.

The panels are pressed to the surface, fixed with spacers. It takes 30-45 minutes for the final setting of the adhesive.

Mounting on the crate is somewhat more complicated.

The frame for the slabs is assembled from wooden beam 10*40 or 20*40 mm. The beam must be treated with an antiseptic. They are fixed to the wall with dowels, for which holes are pre-drilled.
A feature of the frame under MDF: the edge panels are placed so that the distance from them to the edge of the plate is 10 cm.
With a large area, which is more common, intermediate rails are installed at a distance of 40-45 cm from each other.
The panel should be fixed with self-tapping screws to the frame. Start the installation from the site that first catches your eye.
Self-tapping caps are masked with decorative caps, matched by color.
Sockets on the apron are mounted after installing the screen. Holes for them are cut in advance.

In the same way, the option with photo printing is installed. However, in this case, the material must be cut very carefully so that the assembled screen creates a single image.

Installation of kitchen aprons different materials produced in different ways. This takes into account the weight of the material, the thickness of the finishing sheet, the design - a pattern, an image or a panel without a pattern. In most cases, these works can be done with your own hands, if you act carefully and slowly.

Plastic kitchen apron is durable, durable, resistant to detergents, changes temperature conditions, resistance to the development of fungi, mold. The materials are presented in different colors, textures, thicknesses, sizes, decorated with photo printing, painting, film. Plastic elements mounted on self-tapping screws, adhesive base, crate or guide panels.

Advantages and disadvantages of plastic aprons

The plastic apron is made from panels with different compositions and produced by different techniques, which differ in their own advantages. The list of main materials includes the following:

PVC panels are produced up to 500 mm wide, up to 3000 mm long, 5-10 mm thick. When fastening, seams are created that are closed with sealants. When installing, it is important to make accurate measurements of the apron.
The apron made of sheet plastic has a flat surface. The advantage of the variety of material is the ability to create a seamless coating.
Apron made of polycarbonate has high strength. The composition of carbonate glass is similar to the characteristics of metal alloys. The carbonate coating does not break, resistant to mechanical damage, aesthetically pleasing, allows you to reproduce photo prints, images in 3D format.

Advantages of a plastic apron:

affordable cost in comparison with other finishing materials;
high resistance to increased importance;
high temperature resistance;
bacteria, mold do not appear on the surface of the plastic;
ease of care;
small mass;
simple installation that you can do yourself;
a wide palette of shades and textures;
resistance to household chemicals, edible fats and acids;
durability of operation.

Kitchen aprons made of plastic have the following disadvantages:

instability to abrasive detergents;
inadmissibility of placing plastic next to the hob gas surface, materials withstand only electric and induction cookers;
wear.

Rules for installing a PVC apron

The installation of a plastic apron in the kitchen is carried out after preparing the wall panels, which are cleaned of dust and dirt, leveled with a primer, putty and plastering. When gluing thick plastic, you can not perform complex repair work, because material will hide deformations. After the repair is completed, the parts of the apron are fixed using self-tapping screws to minimize damage. kitchen set.

Materials and tools

PVC apron can be attached using the following tools and building materials:

metal profiles;
screwdriver;
wood bars;
self-tapping screws;
construction level;
dowels for creating crates;
ruler;
special glue;
yardstick;
pencil or chalk;
hammer.

Mounting methods

Plastic kitchen apron can be attached to the wall on:

liquid Nails;
self-tapping screws;
crate;
special profiles;

On rails special profiles

Fixing the apron on the guide profiles is a budgetary and practical method. Mounting technology allows you to change the panels if you need to change the design without long installation work. Guides are metal rails that are mounted on the surface wall panel in a horizontal direction using self-tapping screws or building brackets. The cracks are covered with sealant.

self-tapping screws

When installing an apron at the stage of repair work when planning a design for a long period, it is recommended to use self-tapping screws. Plastic elements need to be drilled to create openings for fasteners. To implement this method, the surfaces of the wall panels should be leveled.

Traces of self-tapping screws on the facade are subsequently masked by plastic overlays in a single color scheme. The panels should not be tightly adjacent to the wall, so electrical wiring and other communication lines can be hidden under the facade. Mounting technology, if necessary, provides for dismantling and repair.

On the crate

You can fix the apron on the crate - wood beams, thin slats, PVC guides or a galvanized profile are used. The technology is optimal for hiding gas pipes and water supply structures under the facade of the electrical wiring network. A small distance is left between the wall panel and the headset. Wall surfaces must be treated with antiseptic compounds and antifungal impregnations. When using a wooden beam, it is necessary to lubricate the materials with a hydrophobic composition.

The bars for the crate, depending on the design of the project, are arranged horizontally or vertically. For sufficient structural strength, there must be at least 3 pieces. The pitch of the lamellas in a horizontal arrangement is 200-400 mm. The elements are fixed with dowels, which are installed in increments of 250 mm. The bars must be symmetrically located, so the building level is used in the work.

On glue

You can glue the apron with the help of special liquid nails. The wall should be flat, without deformations. The installation method is characterized by high speed, ease of execution, does not require the use of special equipment. If there is old wallpaper or putty on the walls, the materials are cleaned off. They also remove grease, dust and other contaminants. Then the surfaces are coated with a primer for rooms with high humidity, which has antifungal properties.

It is recommended to apply glue liberally to securely fix materials. It is required to install a balloon with glue in the gun and distribute the composition over the surfaces with zigzag strokes. The elements of the apron treated with glue are applied to the wall panel, pressed down, held for some time until the adhesive base dries.
For installation, it is recommended to choose sheets standard sizes 600 mm wide, 1000-3000 mm long. The cutting of details is also carried out according to the author's design project.

Panel preparation, layout, cutting

Before fixing the facade, the elements are prepared: the parts are assembled, the panels are cut. Wide panels are placed horizontally to reduce the number of joints. Narrow canvases need to be cut and fixed at vertical seams. The material is cut with a knife, scissors or a hacksaw. Works can be ordered in professional workshops that perform laser cutting.

Final finishing

The finishing stage involves closing the space between the apron and the desktop with borders. Structural solution prevent the ingress of moisture, dust into the cracks; will correct defects in the work. The border can be flat, figured, triangular, rectangular shape, it gives additional decorative value to the facade of the headset. The elements are attached to the adhesive base. The finished look of the facade is given by the corner overlays.

Apron decoration

When planning a project, it is important to determine the design and decoration techniques of the backsplash in accordance with the color and style of the kitchen. For a small room, it is not recommended to use dark tones that visually reduce the room. It is recommended to purchase canvases of light shades or transparent panels with a printed pattern. The list of popular panel decorating techniques includes painting, photo wallpaper stickers, and films.

decorative painting

Spectacular decorative painting in the design of the apron. Suitable for work acrylic paints, a sketch from the catalog or prepared according to the author's project. Complex compositions are not recommended due to difficulties in execution and congestion in the design of the headset.

Before decorating, the coating is cleaned and degreased. Then the main tone is applied, a drawing is made on top. The paint should be applied in a thin layer. The image is placed in the center of the apron, or a repeating geometric or floral ornament is performed.

A universal basic tone can be a coating of the following colors:

white;
cream;
grey;
beige;
olive;
Ivory;
metal;
soft peach.

The painting is done with matte or glossy paints. The optimal solution for the kitchen is a small ornament that hides chips and scratches. Light colors allow you to visually enlarge the space; You can create accent areas using saturated tones.

Wall mural

A simple and effective method of decorating plastic facades is pasting with photo wallpaper. The material is applied to a dust-free surface. The adhesive base is smeared on the photographic image with reverse side, then press the coating to the apron. After the elements have dried, the apron is fixed on the wall.

Wall murals are selected according to the style solution of the room and the texture in the decoration of the room.

Coatings can be:

vinyl;
non-woven;
washable;
acrylic;
metal, etc.

Washable wallpapers are budget-friendly and easy to clean. Materials are dense, waterproof, smooth; presented in a wide range of shades. Cloths are attached to the leveled surfaces of the apron, because. do not hide deformations.

Non-woven materials are produced with a special protective moisture-resistant coating. They are resistant to direct sun rays, dust, can be easily cleaned. Pigmentation is preserved during the operational time without damage.

Vinyl materials for photo wallpapers are durable, retain a rich tone, are easy to clean, resistant to moisture and household detergents. The sheets are dense, so they hide the unevenness of the walls. The materials are available in matte or glossy, textured or embossed. The textures of wood, stone, Provencal ornaments, original drawings are reproduced on the coatings.

Film

Self-adhesive film allows you to quickly decorate the facade of the kitchen. Manufacturers offer a wide palette of shades, the possibility of ordering photo printing with original prints of landscapes and paintings. The film is applied to a cleaned and even surface. To improve the quality of adhesion, the plastic is moistened with water and the location of the film is adjusted. It is required to remove the air under the coating.

When choosing a material, you need to consider the colors of the kitchen. Optimum saturated shades, contrasting combinations; for loft, provence, minimalism styles, light neutrals are used (brown, green, ocher, pale pink). For a country-style kitchen, the optimal films for wood texture, with imitation of brickwork, stone.

Apron Care Rules

When caring for an apron, the following rules must be observed:

Regular cleaning with a damp sponge and household detergents is necessary.
To remove water and detergents, after cleaning the surface is wiped with a dry cloth.
It is not recommended to use compositions with abrasive particles and acid-base agents.

During operation and cleaning, the characteristics of the apron coatings are taken into account, which can be smooth or with a textured surface.

Decor kitchen apron plastic is becoming more and more popular. The smooth surface looks beautiful, and the installation of plastic panels does not require special fixtures and tools.

This design of the wall near the work surface is an excellent choice for those who like to change design often and prefer to make repairs in the kitchen with their own hands.

Methods for mounting plastic aprons

You can install plastic different ways. Usually they are glued or screwed to the wall with special fasteners, sometimes they use a frame on which the sheets are attached. In this case, the apron is removable. There are benefits to each method.

You can stick a plastic apron only on a prepared wall. The surface must first be leveled and treated with a primer. But you do not need to drill walls and panels, just choose the right glue.

Installing with fasteners has its advantages. The condition of the wall does not matter. You can even leave the old coating on it (as long as its color doesn't show through the plastic). In addition, under the panels there is a place for cords and extension cords.

The installation method is chosen based on:

type of plastic apron (PVC panels, ABC-sheets, lining, PET-G plastic, polycarbonate and others);
repair stages;
furniture features.

If the repair is completed, and the furniture has taken its place, then it will be easier to screw the apron to the wall along the edges with self-tapping screws. Installation in other ways can be carried out only at the stage of preparing the walls.

Preparation of plastic panels: layout and cutting

First you need to decide in which direction the sheets of plastic will be located: horizontally or vertically. Panels of sufficient width are best placed horizontally, then there will be a minimum of seams on the apron. Narrow sheets are cut into pieces and mounted with vertical seams.

The plastic panel is well cut with a knife or a fine-toothed hacksaw. Beautiful even cuts are achieved using a nichrome thread.

If you have no experience with this kind of cutting, contact a plastic cutting workshop. They use laser equipment that will allow you to get the perfect edge.

It is important not to make a mistake with the color of the apron. In the "Khrushchev" you can not use dark tones: they visually make the room more cramped. For kitchen small size stop at light shades, they are in fashion today.

If transparent plastic is used, it can be decorated with photo wallpaper, colored film or other materials. To do this, you need to apply a drawing to the plastic. You can purchase panels with ready-made patterns, but if you want to be creative, use one of the methods listed.

decorative painting

The apron can be painted with acrylic or oil paints. The plot should match the design of the kitchen. To draw a picture, you can use templates or your own imagination.

Don't choose complex subjects. A modest neat drawing looks much more effective than poorly created intricate plots. Please note that the patterns must be applied in a mirror image, because the surface with the picture will be adjacent to the wall.

Wall mural

The most popular and easiest way to decorate a transparent is photo wallpaper. The decor is glued to a dry and absolutely clean plastic surface. Fine sand and other debris will prevent the paper or film from sticking to the plastic evenly. Bulges and air bubbles under the wallpaper are considered marriage.

If your house is being renovated, there will be enough dust in the air. Settling, it will spoil the result of your work. The whole drawing may be covered with small specks. This is especially true for small spaces.

It is more difficult to achieve clean air in Khrushchev than in big apartment. Ventilate the area where decorative works and do a wet cleaning.

Glue is applied directly to the drawing, that is, the picture should be under the plastic.

Film

For decoration use. The choice of this material is huge. In addition, you can order interior printing on "self-adhesive" according to your photo or sketch. You need to glue slowly, removing the substrate gradually. This is a job for smart people.

The plastic is sprayed with water before gluing, so that the adhesive layer does not grab the surface instantly. From time to time correct the film and remove air bubbles. For repairs in Khrushchev, the color of the film is chosen based on the finish of the walls and countertops.

Fixing the plastic apron

Before attaching the apron to the wall, think about where you need to make technological holes. They will be needed for sockets, roof rails and lights. You can cut them yourself or use the services of special workshops.

Attaching the apron to the wall

Installation in this way has obvious advantages:

the panel adjoins the wall tightly, there are no gaps between them;
thanks to the glue, the plastic becomes more rigid and less exposed to mechanical damage;
installation technology is simple and accessible to everyone.

You need to glue a plastic apron when the repair is not yet completed. A flat wall (differences should not be more than 1 cm) is primed and marked. Then the panels are glued, following the sequence of actions:

The level marks the lines of the lower and upper edges of the apron.
Do cutting plastic; the apron should protrude beyond the intended lines and hide under the furniture.
Mounting adhesive (Liquid Nails are well suited) is applied to the material and the plastic is pressed against the wall.
The edges of the apron are best secured with self-tapping screws.
If the plastic sections remain open, then they are covered with decorative skirting boards or starting strips.
The joints are masked with planks of a suitable color.

You can install such an apron quite quickly, but in order to remove it, you will need to move the furniture. The glue often damages the material and the plastic becomes unrecyclable.

Mounting the apron with self-tapping screws

Soft plastic is not only easy to cut, it drills perfectly. Therefore, installation with self-tapping screws does not cause difficulties. This installation method is well suited for transparent printed panels and in cases where repairs have already been completed. After all, glue can damage the painting or wallpaper, but here the panel does not touch the wall. Installation can be carried out with installed furniture. The work is carried out according to the plan.

Make holes in the wall for self-tapping screws and roof rails.
Break up the plastic.
Set the beacons in the same plane (they will rely on plastic panels).
Attach the panels to the wall using screws or staples.
Disguise the hats of hardware and joints with plugs, caps and skirting boards.

A gap is formed between the wall and the plastic, in which the wiring can easily hide. If you get tired of such decor, it can be easily removed without moving the furniture. On the video - do-it-yourself installation of an apron.

Installing an apron with a crate

A simple plastic apron can become a real decoration of the kitchen if you approach its creation creatively. The thickness of the rails allows you to place controllers under the apron, LED bulbs, switches, sockets.

The crate can be wooden or metal. Profiles and strips for it are set strictly according to the level. We will consider the details of mounting plastic in more detail.

The crate is installed perpendicular to the direction of the apron panels for the kitchen.
The distance between the bars or profiles should be no more than 50 cm.
Fasten the crate to the wall with screws or staples.
The panel is fixed with self-tapping screws.
The cuts and edges of the apron are trimmed with skirting boards and planks.

Can be glued to the frame. In this case, you need to carefully choose the rail - it should be smooth and well processed.

Plastic kitchen apron - a good choice if repairs need to be done quickly. It can be easily installed both in a small "Khrushchev" and in larger areas. Kitchens with plastic trim do not look as impressive as with. It should not be forgotten that this is, nevertheless, a budget option. But he has the right to life.

ABS kitchen aprons and other materials can be purchased in the online store.

What is ABS plastic, aprons in stock and on order, in various colors. This product can not only protect the walls from pollution, but also update and decorate the room.

Manufactured using high quality modern material made of food-grade plastic, printed with thermal and photo printing, with highly varnished or matte surface, with 3D pattern applied in several layers and creating the effect of depth and volume.

The service life is about 5 years, which is important for the use of such an inexpensive and easy-to-install material.
Today, ABS plastic is very popular among the materials used to decorate and protect the wall surface from mechanical damage, moisture, household chemicals. food grade plastic ABS is flexible, hygienic and easy to use. Sheets of this material have limited heat resistance compared to ceramic tiles or glass, withstand temperatures from 40*C to 180*C. The temperature for drawing a pattern on plastic for its reliable and durable fixation is 180 * C. ABS kitchen aprons are practical and attractive: they do not absorb grease, are easy to clean with a cloth and are non-abrasive. detergents, at proper care long time retain the visual effect of glass, have a very clear and high-quality pattern.

When installing it, only accuracy and basic skills are required from a specialist. Aprons are easily transported, mounted, do not break, easily take their original shape after rolling into a roll, do not crack when screwing in screws, and are easily cut with a construction knife. For cutting, it is enough to make marks and draw a straight line with a sharp blade along the surface of the apron, then break it at the notch. It is necessary to glue to the wall surface with a special adhesive for plastics and wall panels.

The length of the finished product is 3 meters. For ease of installation and cost savings upon purchase, some types of screens are individually cut to obtain additional sections 1 and 2 meters long.

ABS plastic is better than ordinary plastic;
Support a local manufacturer.

If you need a large number of aprons, you can request wholesale price via the feedback form.

Easy transport: rolled into a roll 60 cm high, 25-30 cm in diameter. Compact and lightweight roll can be transported to the subway or take up minimal space in the car. After unpacking, it easily returns to its original shape.
Attractive price.
Density of ABS apron allows you to close all the irregularities and defects of the surface on which it is mounted. In the product card you will find photos of interiors with ABS aprons.
Savings of services of the Transport Company: the minimum volume, light weight and ease of packaging allows you to spend about 500.00 rubles on transportation to distant regions.
Easy installation: no special knowledge is required, it is mounted using liquid nails for polystyrene or self-tapping screws. Easily cut with a utility knife or disc.
100% moisture resistance, heat resistance up to 180 degrees C, brightness and quality of thermal printing, varnished or matte 3D surface, resistance to mechanical damage.
Easy to clean from dirt and greasy traces, does not absorb fat, does not fade over time. To preserve the durability of the coating, cleaning with liquid, non-abrasive detergents is recommended.
Set: Additionally, at the request of the customer, the apron is completed with PVC strips 3 mm thick: initial, connecting, internal and external corners. Initially, such strips are intended for mounting HDF aprons, however, when using silicone sealant fit perfectly and complement thinner ABS materials.
Delivery: We deliver in the Moscow region and regions. The cost of delivery in Moscow is 800.00 rubles.

The presence on the construction market of proposals for finishing the kitchen space often leads to a dead end. But there are always solutions to the problem. The ratio of cost and quality, the ability to install with your own hands are among the advantages that plastic kitchen apron. What makes it popular is the way it looks.

In contact with

Kinds

Ready-made hinged aprons for the kitchen made of plastic have several varieties.

Among them stand out:

Carbonate glass. The use of this material for a kitchen apron is considered the most reliable. In terms of strength, it is slightly inferior to glass or tile, but has a lower cost.
. May be sold in pure form or already with a finished drawing. The strength and ability to withstand the load depends on the thickness of the slab.
Vinyl. Can decorate working area, however, it is able to deform when heated from a working stove. For this reason, it is rarely used.
Plastic. Gradually loses its popularity due to low strength and low resistance to high temperatures.

The first two options are the most popular in the manufacture of plastic kitchen apron. What is the advantage of this material.

Prices for plastic lining

plastic lining

Advantages and disadvantages

Finishing from plastic has a number of significant advantages.

They are as follows:

ease of processing and installation;
possibility of dismantling and replacement;
long period of operation;
relatively inexpensive cost;
the possibility of installing a seamless structure;
good water repellency;
products made of carbonate glass and PVC are resistant to high temperatures;
the ability to hide engineering and communication lines;
a wide range of design solutions;
ease of maintenance;
resistance to household chemical liquids;
resistance to decay, mold and fungal diseases;
small own weight.

Along with numerous advantages, there are some disadvantages: susceptibility to mechanical stress and stress, as well as the ability to deform when close to the hob.

PVC prices

pvc panels

Characteristics

Today you can find any color schemes and design solutions. It can be an imitation of stone, wood or other materials, photo printing of cities, flora and fauna.

When choosing a kitchen apron made of plastic with a pattern, it is necessary to take into account the size of the kitchen and the material. Sheets of carbonate glass can be 3 mm thick, 0.6 meters wide, 1.0, 2.0 or 3.0 meters long. From them little waste is obtained and a minimum of seams.

PVC are available in widths from 0.1 to 0.5 meters. The length can be 2.6, 2.7 or 3.0 meters. The thickness of the products ranges from 0.5 to 1.0 centimeters. Such material requires careful selection of plates, since as a result of improper installation, cracks may form between them. PVC sheets are produced in the size of 1.0 x 0.5 meters.

Plastic lining can have a length of up to 3.0 meters and a width of 0.1 to 0.2 meters. Due to insufficient resistance to mechanical stress and low refractory qualities, it has low practicality.

You can combine plastic products with different dimensions. This will make it possible to select the material with the least loss during cutting and fitting.

Manufacturing

To answer the question of how to make a kitchen hinged apron from plastic panels, it is necessary to take into account a number of factors regarding the layout, layout of sheets and their cutting.

Important! To perform the markup, it is necessary that the kitchen has already been mounted, but not installed. If there is no kitchen yet, then you can use the documentation for it.

The markup process includes the following work:

On the wall where the kitchen will be mounted, along the upper edge of the countertop, along its entire length, it is necessary to draw a line or beat it off with a paint cord.
The line is drawn along all the walls of the kitchen, taking into account the configuration of the countertop.
The same line is drawn along the edge of the wall cabinets.
The lines mark the place of installation and the lower edge of the hood. For electric stoves, the height from the countertop is 0.65 meters, for gas - 0.75 meters.
Lines are drawn on the wall from the sides of the hanging furniture, taking into account the gap between the hood and cabinets of 3-5 cm.

Marking must be carried out taking into account the fact that it should go 2-3 cm below the countertop and 5 cm under sides hood cabinets.

Under the base of wall cabinets, the material can be wound up by 2-3 cm or installed end-to-end with them. The final marking will show the general outline of the coverage.

Layout and cutting is carried out depending on the direction of installation. With horizontal in-line mounting, there will be a minimum of seams. First, whole sheets are assembled.

According to the markup, the rest are cut. For cutting, you can use a fine-toothed hacksaw or knife. Specialized enterprises can cut plastic plates on a laser machine according to your dimensions.

Important! When the kit is ready, you need to pick up a border for a plastic kitchen apron and proceed with the installation work.

Border

It is advisable to close the joint between the plastic and the countertop with a border, which will protect the kitchen work surface from moisture.

The need for a border is as follows:

prevents moisture from entering the butt joint and wooden elements;
protection from dirt and food debris;
hides minor defects in the butt joint;
performs a decorative function.

The choice of a plastic border is due to several positive aspects. It has a greater pressing density than curbs made of other materials. The plastic border for panels is easy to mount, you can simply glue it or put it on a sealant. In many ways, the tightness and density of adhesion to the surface depend on the shape of the curb. It can be rectangular, triangular, flat or shaped.

Do-it-yourself fastening

To fix an apron for a plastic kitchen with your own hands, you can use one of three methods.

It could be:

Installation of a new plastic kitchen apron on the crate.
Glue mounting.
Fastening to the wall with self-tapping screws.

Depending on the chosen installation method, construction tools may be needed:

metal profile or wooden bars, with a section of 2-3 cm,
screwdriver,
drill with drills,
dowels and screws for lathing,
self-tapping screws,
building level,
wooden mallet (mallet),
pencil,
tape measure or ruler
construction adhesive.

Important! The length of the crate material should not exceed the width and height plastic panels.

Panels for the kitchen apron are installed according to the markings in accordance with the selected option. Now let's look at how to install a hinged plastic kitchen apron in each case.

Application of the crate

There are a few things to keep in mind when installing a batten cover:

The fastening of the bars or profile is carried out around the entire perimeter of the plastic panel. Using a drill and screws fastened bottom bar.
On the upper edge, it is necessary to fix the upper bar and attach the side bars.
To give rigidity and reliability of the structure, you can install 1-2 bars inside the perimeter. The distance between the bars and their number depends on the area of the panel.
If it is planned to equip the product with hinged structures (railing or hangers), it is necessary to install a bar in the intended place for their further fastening.
In the panels, using a drill, it is necessary do mounting holes.
Using self-tapping screws, install the panels on the crate.

Finished sheets are mounted according to the “groove-comb” principle, from left to right, from bottom to top, in rows. First, the lower left is mounted. The adjacent right one is installed in the groove and the bottom row is filled. Using the building level, the correct installation is checked.

Glue fixing

Plastic products are good because they can be installed within an hour. There is no need to move the countertop, drill holes and mount the crate.

How to glue a hinged apron in a plastic kitchen.

To do this, follow these steps:

The walls must be prepared for the upcoming work. To do this, it is recommended to remove the old coating, wallpaper, plaster or tile and apply a deep penetration primer.
If there are cracks or chips on the wall, they are covered with mortar.
The surface of the wall must be leveled using plaster, and once again treated with a primer.
After the wall has dried, you can proceed with the installation.
It is desirable to glue the apron according to the same principle as installing it on the crate. Glue is applied to the panel, after which it is pressed against the wall and fixed with spacers. The glue hardens within 10-20 minutes.

To glue a plastic apron in the kitchen, you need to correctly apply glue to the inner surface of plastic products. It is recommended to apply the adhesive in strips: first along the perimeter, then the internal strips are applied over the entire area from top to bottom at a distance of 10-15 cm between them.

Self-tapping fastening

This method differs in that it does not involve installing a crate and using glue. Installation is carried out directly on the wall. For this, it is necessary that the surface is smooth and without defects.

Consider how a hinged kitchen apron made of plastic panels is attached:

It is necessary to make markings on the wall and sheets for future holes.
Holes should be as aligned as possible and match. It is not recommended to drill holes in the panels and the wall at the same time. Behind the plastic, dust from drilling the wall will collect. It is possible that the plastic may burst.
Installing dowels must be inserted into the drilled holes.
Attach the panels to the wall and attach them through the prepared holes with self-tapping screws.
Close the caps of the self-tapping screws with decorative overlays.

The choice of how to install kitchen panels depends on the owner and the availability of material.

Final finishing

To give an aesthetic appearance, linings are installed on the outer and inner corners, as well as starting strips. The fastening of the slats is carried out at the top of the crate.

When installed on a skirting board, there is no need for a bottom bar. Vertical starting strips, corner linings are selected based on the shape of the kitchen.

The connection between the worktop and the plastic cover is best closed and sealed. You can use a border for this. Fastening the curb to the countertop is carried out in two ways. Either it is attached to the countertop and pressed against the plastic, or vice versa. It is not recommended to mount the curb tightly. For its gluing, you can use aquarium sealant.

Design Features

Wall panels made of plastic make it possible to use any design solutions. It can be either a transparent material or various options artistic design:

Orchard and berry and garden compositions or flower fillings. This design option is too catchy. It will look more acceptable on ordinary neutral furniture without carvings and bulges.
Imitation natural materials. It can be mineral or ordinary stone, wood, stone or brickwork. They are not of wide interest, although they are also in some demand.
Mirror coating. Allows you to visually present the room as large in size. Possible combinations on the mirror with a different coating. For example, flowers or birds.
Flora and fauna. A very popular design trend. It is always a pleasure to look at a green forest, a quiet lake surface, a blue abyss or an endless sky.

A transparent apron for a new plastic kitchen is original if there is some kind of design under it. For example, wallpaper in retro style. The choice of finishing depends on the wishes of the customer.

Care rules

The maintenance of the structure is very simple. It is recommended to wash the plastic surface with a soft cloth dipped in warm water with a small amount of dishwashing liquid. After cleaning, wipe the surface dry. Do not clean the surface with a rough sponge or abrasive substances. The material surface or pattern may be damaged.

Useful video: installation of a kitchen apron

Plastic coating is a good solution if the repair needs to be completed in a short time. You can install it both in a limited space and in a large kitchen. It will be a spectacular kitchen element for little money.