Dismantling doors: step by step instructions. Dismantling interior doors: how to do it right How to dismantle old interior doors

Every owner who started overhaul in an apartment or house, is faced with the problem of dismantling the entrance or interior doors. It would seem that there is nothing complicated here - remove the door leaf from the hinges and get rid of the box. But in fact, not everything is so simple. As practice shows, if you want to get a beautiful and even doorway, it’s worth removing the old structure correctly. And below we will talk about how dismantling should be carried out wooden doors with your own hands and consider the following points:

	Features of dismantling wooden doors.
	Dismantling methods: sparing, fast.
	Dismantling of the balcony and front door.

Breaking - not building: features of dismantling wooden doors

Most inexperienced builders mistakenly believe that removing an old door requires only picking the jambs from the wall. But in fact, everything is not so simple. Often, aggressive and incorrect dismantling can damage not only wooden structure but also part of the wall. A similar situation has become especially widespread in old Soviet houses, where for the construction interior partitions non-durable gypsum boards are used.

In order not to damage part of the wall when dismantling interior doors, you need to approach this process creatively. First, find out if you need old door or you are planning to throw it in a landfill. In the first case, dismantling must be carried out carefully so as not to damage the components, for example, if you are going to rearrange the door to the dacha. If you no longer need the box and all the elements of the door, there is a "merciless" and fast way, which we will discuss below.

However, no matter what method of dismantling wooden doors in a private house you choose, the work must be carried out as carefully as possible, without causing damage to the wall. Otherwise, after getting rid of the box, you will have to spend money on plastering and puttying.

Each door structure includes two vertical posts, one horizontal crossbar and a door leaf. In some cases, there is also a threshold (lower horizontal). Often, old doors managed to survive 5 or even more paint jobs, becoming a few millimeters thicker and therefore heavier.

The paint has long hidden all hints of the location of nails, screws and other fasteners, but on an intuitive level, their location can still be recognized. For example, usually between the door frame and the wall there is wooden block. Its thickness is chosen so that the vertical posts are perpendicular to the floor surface. Large nails were driven into such a beam, having a length of 150 or 120 mm: two into the right vertical rack, two into the left and one into the upper horizontal bar.

If the doors have not been changed for 30-50 years, then such nails have rusted, which means that it’s not easy to get rid of the box. To prevent part of the wall from being uprooted along with the bars, use a pry bar or a nail puller. In addition, you will need an ax, a hammer and a saw.

A gentle way to dismantle a wooden door with your own hands

Below we will explain how to remove the box and remove the doors so that they can be used in the future. Step by step:

We remove the doors by slipping a crowbar between the door and the floor to create a kind of lever. With the door slightly closed and ajar, begin to lift the canvas by pressing on the pry bar. It’s good if you do this process together, since the old Soviet doors are quite heavy, especially if you are dismantling the front door. In the event that the hinges do not react in any way, it is possible that they are very clogged or rusted. In this case, apply lubricant (it is recommended to use an anti-corrosion spray lubricant that quickly removes rust), wait a few minutes, then try again. The complete removal of the canvas must be carried out in the open form, otherwise the door will rest against the horizontal bar.

When you set the door leaf aside, proceed to eliminate the trim. You should not worry about the safety of old architraves, as in many cases they are in poor condition, and are also covered with a thick layer of enamel. The tip of the ax must be placed in the hole between the box and the casing or in another place higher if the nails are covered with paint and nothing is visible. Take an ax in one hand, a hammer in the other.

Carefully hammer in the ax, then disconnect the casing from the box.

In the expansion slots you will notice large nails. Get an ax under one of them, then move the casing to the limit. This procedure must be repeated in places where there are other nails. As a result, you can easily separate the casing from door frame.

There are platbands on both sides, which means you can repeat the same steps on the other side of the wall. But in most cases, the platband breaks. In the days of Soviet construction and engineering, they were made very strong and thick, and the platbands were made quite thin, so it simply would not work to remove them with rusted nails. But today it is quite inexpensive and easy to make more beautiful and new platbands. In addition, if you remember that faded enamel has already dried on the old casing, as a result of which it cannot be used for firewood, then it would be better to take care of a new frame for the doors.

When the architraves are removed and you are left with only a door frame with iron hinges. Before pulling it out of the wall, consider that it is nailed with 150 mm nails to the leveling boards. Carefully examine one of the uprights - if you notice a lower attachment point (a bar or a nail), step back from it up about 20 cm. If you do not see the fasteners, then step back 60 cm from the floor and cut the rack.

Slightly above the resulting cut, you need to insert the ax so that it is between the wooden rack and the doorway, after which, with a confident push, you need to move the rack away from the wall. So, you simultaneously remove the rack and you can pull the nail out of the wall.

Do exactly the same with the upper crossbar and the opposite part. When the first pillar is removed, the dismantling of the doors will become much easier and faster.

Keep door block, which has served for 30 years or more, there is no point - you can use more durable, modern and inexpensive materials, or you can use the same tree, but more recent.

Above, we examined one of the most problematic options for dismantling a door with large nails in the form of fasteners. If you see that the elements are fixed with screws, then it will not be difficult to break this door frame - just use a screwdriver.

Fast way

If you are going to get rid of the old door and do not plan to install it elsewhere, we recommend using a faster and in a simple way dismantling the box.

You may need the following tools:

crowbar;
axe;
hammer;
wood cutter.

Quick dismantling of wooden doors with your own hands

Remove the door leaf, as described in the instructions - this step cannot be done faster and easier.

There is no point in breaking the door frame, so it is much easier to break it. This is very easy to do if you cut in the central part of one of the uprights.

Use a hacksaw to cut at a 45° angle.

If the box has a nut, it is recommended to cut it in the center.

If the threshold is fixed in the doorway above the floor, then you can uproot it using a crowbar.

You can quickly tear off the platbands by driving an ax between them and the box beam. Pull the ax handle away to get a gap that will be enough for further work with a crowbar.

Do not forget that if you do not need the old door frame, then the remaining wall can still be useful for installation. new door, which means that you need to do the job as carefully as possible.

Features of dismantling a plastic door

Metal and plastic doors have long ceased to be considered a novelty, and much less often you will be able to see a massive canvas made of wood than an ordinary structure shining with pristine whiteness. But for proper operation, adjustment and repair, you need to know some secrets that are not known to all owners of such doors.

It is important to understand the functioning and arrangement of the hinges on which the door may be located. In this case, you will be able to use the full potential to the maximum, repair or remove the entire structure. The hinge includes several elements: frames with mounting pins, a steel tab, spacers located between the frame and the tab.

Dismantling the door on the balcony

If you are going to dismantle plastic door according to the instructions above, you are unlikely to succeed. This is because such structures have some features in installation and dismantling, so they need to be removed in a special way.

Dismantling the door on the balcony

Remove the special protective caps covering the hinges.

tilt balcony door on himself, holding her tightly free hand, and lift up to release the bottom support pin. Due to the fact that the hinges in these designs are not fixed at the bottom, the door can be easily removed by lifting it slightly and moving it to the side.

Removing the front door

It is worth noting that the device of the front door made of plastic differs from the balcony one, which means that dismantling should be carried out differently. The main difference is that the entrance doors have a reinforced structure, and there are no double-glazed windows.

They also have a different loop structure - they are more powerful, have an anti-burglary system. The plastic front door has three hinges, and the balcony door has two. This is primarily due to the fact that the door is quite heavy, and two hinges are simply not able to cope with this load.

The dismantling procedure is carried out according to the scenario described above, but with one difference - you definitely won’t be able to remove such a door alone. When you remove the door from its hinges, it must be held firmly, and only two people can cope with such a task.

Removing a metal door

Most new buildings use metal front doors. They seem reliable only at first glance. In fact, this is a simple sheet of steel that does not have insulating properties and is not reinforced with anything. The owners of these apartments prefer to replace the structures with new ones, and insulate the existing ones. But in any case, you have to remove the canvas.

Then you can take out the door frame and proceed to install a better door.

As you can see, dismantling an old door is not difficult, whether it is plastic, wooden or iron. The main thing is to do everything carefully and measuredly so as not to spoil the opening in the wall, which can be useful for installing a new door.

The need to install interior doors usually arises during a major or cosmetic repairs, but there are other cases where you just need to do the job. This is a rather complicated process, but if you know the sequence of actions, have necessary tools and basic skills, then everything can be done independently. By following the developed technology and performing all the work carefully and scrupulously, you can install interior doors without the help of specialists.

The main stages of replacing an interior door with a step-by-step description

An interior door can only be installed after all “wet” work has been completed in the room, that is, the walls and ceiling have been plastered, and the floor has been leveled. If you do this earlier, then due to high humidity, the door leaf may change its size. A subfloor must also be laid so that you can determine the height of the door.

The stores have a large selection of interior doors. All of them have an attractive appearance, but not everything is always good with the geometry of the canvas. It happens that for poorly made doors, the difference in the length of parallel sides can be several millimeters. This can significantly complicate the installation process, so before buying it is worth measuring the canvases, for this it is enough to take a tape measure with you.

When buying a door, do not be lazy and make sure that you pack and send exactly the product that you have chosen.

Interior doors are made of fiberboard, MDF, natural wood, plastic, glass

Often only the canvas without the door frame is sold. They buy it when they want to replace old doors or there is an opportunity to make a box on their own. It is a U-shaped frame. For its manufacture, two vertical and one transverse racks are used, which are made of timber. The material can only be used dry, even and without black knots. The thickness of the timber used must correspond to the thickness of the purchased door leaf.

To perform the work, you will need the following tools:

hammer;
chisel;
screwdrivers;
measuring instruments;
perforator;
miter box;
hacksaw or circular saw;
building level;
screwdriver.

To install an interior door, you need a carpentry tool

You also need to have wooden wedges, self-tapping screws and finishing nails, door hardware and mounting foam. Interroom doors in the modern construction market are presented in a wide range, among themselves they differ not only in appearance, but also in the material from which they are made. Most often they are made of fiberboard, MDF or natural wood. The method of installation does not depend on the material.

Wooden doors have a beautiful appearance, but they are heavy and expensive.

The interroom door consists not only of a cloth, but also of a box. It depends on the material used for its manufacture, how long such a structure will last, how reliable and durable it will be.

A box made of laminated wood will last a long time and look beautiful, but only if high-quality lamination is used.

For the final design, it is also necessary to have additional elements and platbands, the purchase of which is recommended after the door is installed and you decide on the required dimensions of such elements.

Removing an old interior door

If the door is not properly dismantled, then part of the wall can be destroyed.

Before proceeding with such work, you need to decide whether you will continue to use the removed door and box. If you install it again, then dismantling must be done carefully so as not to damage the canvas and the box. Otherwise, the process will be faster, but the door will be damaged.

The door frame consists of two vertical and upper horizontal pillars, in some cases there may be a threshold. To fix these parts in old houses, nails 120–150 mm long were used, the heads of which are hidden under several layers of paint, which greatly complicates the dismantling process.

The sequence of work is as follows:

Removing the door leaf. The door is opened, a crowbar is inserted under it, acting as a lever, the canvas is lifted and removed from the hinges. Work is easier to do with an assistant. Before starting dismantling, it is recommended to lubricate the hinges with anti-corrosion grease to remove rust that prevents the canvas from being easily removed.
To remove the door leaf, it must be slightly raised
Removal of platbands. Most often they are not reused, so you should not worry about their safety during installation. An ax blade is installed between the box and the casing, after which it is hammered, and then the casing is removed. The ax must be inserted in those places where the nails fastening the casing are located.
An ax or a spatula will help to remove the casing
Removing the door frame. Carefully inspect the racks. Try to find locations fasteners. Stepping back from the bottom nail about 20 cm, and if it is not visible, then at a distance of 70–80 cm from the floor, the rack is sawn. An ax blade is inserted under it above the cut point and the stand is pushed back, after which it is removed. The same actions are performed with other parts.
If the box is fixed with long nails, then in order to dismantle it, you will have to saw the racks

If you see that the door frame is fixed not with nails, but with screws that can be unscrewed, then the dismantling process is greatly simplified. It is enough to twist all the screws and disassemble the box without damaging it.

Video: do-it-yourself interior door dismantling

Preparing a doorway for installing an interior door

The next step is preparation doorway to install a new door. It needs to match the size of the building being installed. standard height it can be 190–200 cm, width 60–80 cm. In order to properly install the door, the width of the opening should be 5–8 cm larger and the height 3–4 cm.

The doorway should be slightly wider and higher than the frame of the door being installed.

When preparing a doorway, you must adhere to the following rules:

At runtime preparatory work a lot of dust is formed, and if the door is installed in a residential area, then all things and furniture should be well covered.

Sometimes there are situations when, in order to install a new interior door, it is necessary to narrow or expand the opening. In most old houses, the thickness of the doorway is 75 mm, this parameter should be guided by when choosing new design. If the thickness of the box does not match the thickness of the doorway, you will have to use extensions.

If the door frame is less than the width of the wall, then it is necessary to install extensions

It must be remembered that expanding or reducing the size of a doorway requires not only additional time and effort, but also funds. Before buying a new door, you must correctly determine the size of the opening in the wall. They do this in at least three places in order to correctly select the parameters of the box.

During the dismantling of the box, even if you carried out all the work carefully, the finish may still fall off in some places. Identified defects are eliminated before the installation of the box gypsum plaster. It is easy to work with it, besides, it freezes very quickly.

To level the doorway, it is plastered

The opening is enlarged using a perforator and a grinder. When it is reduced, the order of work will depend on the size by which this must be done. If it is 10 cm, then you can do brickwork. For smaller sizes, it is recommended to make a box from metal corner, after which the remaining space is filled with mortar. You can also reduce the opening using a metal profile structure or wooden beams, which is sheathed with drywall.

To decrease doorway, are used wooden bars or a frame made of metal profiles that are sheathed with drywall

Installing a new interior door

If you decide to install an interior door yourself, then you need to start work by attaching the hinges. They can be universal, left- or right-handed. There are installation standards for these parts, according to which there should be 20 cm from the hinge to the lower and upper edges of the canvas. Usually, the manufacturer already makes recesses in the doors.

The hinges securely fix on the box and the door leaf

If they are not there, then you need to mark the places for installing the loops, and then using a chisel or a router, you need to make recesses of 2.2–2.7 mm. After that, install the parts in their places. Holding them with your hand, make holes for the screws and fix the hinges. In the same way, the parts are installed on the door frame.

After purchasing a standard door, still measure its width and height, as there may be deviations of up to 2-4 mm, and this affects the correct installation.

The box is assembled in the following sequence:

Preparation of a flat surface. It can be a floor or two tables. After laying the canvas, side racks are applied to it, and then the upper bar is fixed with self-tapping screws. First you need to drill holes, the diameter of which is 25% less than the diameter of the self-tapping screw. To fix the top bar, two self-tapping screws are used on each side.
The doors are placed on a flat surface, after which the elements of the door frame are attached to them and the frame is connected
Sawing off vertical posts. They are made with a small factory stock, so after fitting it is necessary to make an adjustment to the size of the door. To do the job accurately, it is better to use a hand saw.
The excess part of the vertical racks is sawn off along the length of the canvas
Installing the box in the opening. The U-shaped door frame is put in place and leveled with a level. They remove the end decorating strip on the left and right racks and make holes every 25–30 cm. Dowels are inserted into them, and then the box is fixed. In order not to deform it, wooden wedges are installed between it and the wall and the correct installation is checked again.
After connecting the parts of the door frame, it is installed in the opening and fixed with self-tapping screws.
Hinge door installation. To do this, check how easily the doors open and close, this should happen easily. There should be a gap of about 3 mm between the canvas and the box.
After installing the box and checking the correctness of its installation, you can hang the door leaf on the hinges
Seam filling. The gap that remains between the wall and the box is sealed with mounting foam. It is important that there is not a lot of it, since during expansion it can damage the box, so the gap is filled by about a third. The sealing of the vertical seam starts from the bottom.
The gap needs to be filled with foam only two-thirds

Video: installation of an interior door

Finishing the doorway after installation

There are several ways to finish the doorway.

The use of platbands is the most simple option, it is convenient when the width of the wall and the door frame are the same. In this case, it is enough to nail or glue platbands of the appropriate sizes onto the box. With their help, you will hide the gap between the wall and the box. The installation sequence of the platbands will be as follows:

Measurement of the required length of the casing. After determining the parameters, this part is cut off. Please note that it must be fixed at a distance of 1 cm from the hinge, otherwise a creak will be heard when using the door.
The edges of the platbands are cut at an angle of 45 °, it is easier to do this with a miter box
Platband fastening. It remains to attach them to the door frame and fix with glue, self-tapping screws or finishing nails.

If the width of the doorway is larger than the size of the door, then it can be finished with plaster and paint. To simplify the application of the composition, it is recommended to install beacons. After leveling the plaster, it can be painted. There is a simpler method - after plastering, a drywall sheet is fixed required size which will give you a smooth surface.

After plastering and leveling the doorway, it can be painted

Usage decorative stone it is advisable for openings without doors, but can also be used if it is available.

The doorway can be trimmed with decorative stone

Plastic or MDF panels are also popular. For their installation, a frame is created from a metal profile. After that, it is sheathed with MDF or plastic panels. This material has good heat and sound insulation characteristics, it is durable, easy to paint. Plastic panels They are lightweight, waterproof, and inexpensive.

MDF panels are often used to finish the doorway.

Video: installation of interior door platbands

By installing interior doors with your own hands, you can completely transform the apartment and at the same time save money on paying for the work of specialists. If you have all the necessary elements and skills, then following the rules and following the recommendations of professionals, you will be able to properly mount the box and door leaf. If a fiberboard door is installed, then you can handle it yourself, since its weight is small. When installing products from MDF or solid wood, you will have to invite assistants, since you will not be able to cope with the large weight of the structure on your own.

Installation of interior doors is one of the most difficult repair work. This is due to the fact that the door structure requires very precise centering - both vertically and horizontally. The latter is not easy to achieve.

Dismantling the box

Door block design

The interior door can be made in two versions: with and without a door frame. The second case involves the installation of the canvas in an old or simply ready-made frame, the first is the installation of the entire block in the doorway.

The first option is preferable for many reasons.

Warp - old box, even when saving appearance, to some extent deformed. The “native” canvas underwent changes along with it, which means that it somehow compensated. The new one does not contain suitable changes, and therefore it simply will not sit in the old door frame.
Dimensions - opening parameters are rarely standard, especially after repair. When installing a door, even a specially made one, difficulties arise. Fitting the box under the opening, and then under the canvas means extending the installation work by at least three times, and without a guarantee of results.
Load – The door frame, leaf, hinges and lock in the block are designed for specific loads. If the structure was manufactured as a single module, then the load distribution has already been calculated by the manufacturer and implemented. Otherwise, the owner will have to do it.

Such high requirements are imposed mainly on swing systems. Sliding structures are somewhat easier to install with your own hands, since, firstly, they are most often installed on the opening, and secondly, they are much more standardized.

How to disassemble the interior door block

The door frame is installed taking into account the material of the wall. Accordingly, do-it-yourself dismantling will also require different tools and techniques.

The door will be removed from the hinges - for this, the end of the mount is placed under the leaf, which is as open as possible, and gradually rises until the canvas comes out of the hinges. It is recommended to move the sash a short distance to the right and left.
In order to disassemble the platbands, the tip of the ax is driven in between the platband and the vertical rack of the frame. Force is applied away from the box until a gap is formed. The photo shows the moment of separation of the clypeus.
The same procedure is repeated at the attachment points, then the casing is removed. Usually it is not possible to disassemble the casing without damage, since thin strips are used for its manufacture.
If nails can be found on the box - and this is not always possible under multi-layer painting, then they should be removed: a beam is cut around the cap to free up space, and then the nail is removed with pliers or a nail puller. If we are talking about a metal door frame, then you need to cut the pins.
At a distance of 60–80 cm from the floor, a vertical stand is sawn. If the attachment point is visually determined, then 20 cm should be retreated from it. Then the tip of the ax or the nail puller is placed between the slope and the stand below the cut point, and the timber is pressed with force. The top of the rack is also removed. In the photo - the separation of the lower part of the rack.
The horizontal bar can be removed without sawing, by pushing down. You need to disassemble the second vertical rack in the same way as the first.

From this article you will learn how to competently do the dismantling and installation of interior doors with your own hands. We will discuss in particular detail the intricacies of dismantling the door structure.

There are two methods of dismantling:

"Neat" - when you want to save door components for further use. For example, in the country. In this situation, you need to save the door leaf, trim and box.
"Sloppy" - you do not need the old door and all its other elements.

Attention! Regardless of the choice of method, it should be remembered that in any case, everything must be done carefully. So that when installing a new door, you do not have to perform additional work: plaster, putty, etc. etc.

Dismantling doors: sequence and necessary tools

Simple, at first glance, dismantling can become more difficult if the technology is not followed.

First of all, you need to prepare the following tool:

axe;
hammer;
wood saw;
crowbar with a nail puller;

These are the main tools. With “careful” dismantling, a wide chisel, pliers, a sharp paint knife, a screwdriver, a screwdriver and a cutting machine (grinder) with a metal disc may be required.

General operation steps:

We prepare the tool.
Take the door panel off the hinges.
We tear off the platbands from all sides.
Remove the door frame from the opening.

Accurate dismantling of interior swing doors

There are situations when dismantling and installation require special care. This may be due to the need to preserve the door itself and all its elements.

Or you just don’t want to do extra decoration of the walls adjacent to the doorway.

In this situation, work should be done as follows:

First of all, you need to remove the canvas from the hinges. If the loops are card and detachable, then this will not be difficult. If the loops are universal, then first we unscrew the screws from them.
Now we're clearing cash. We remove the decorative plugs from the screws and unscrew them with a Phillips screwdriver or a screwdriver. If the casing is nailed to the box with finishing nails, then carefully pry it off from the opposite side with a wide chisel. In this case, the nails should “bulge out”. We take them out with pliers and cash out.
Next, dismantle the box. First of all, you need to find the places of its attachment to the opening. Most often they are in the recess for the loops and the feigned part of the castle. Or in other places of the box, the fixing screws are closed with decorative plugs.
We unscrew the fasteners from the box with a screwdriver at low speeds. Or use a Phillips screwdriver.

Attention! When dismantling, be aware that non-screwing screws and nails in the door frame can be sawn off with a grinder. It is mandatory to use protective equipment: goggles, gloves.

In order to remove the box beam from the opening without damage, you need to cut out all the mounting foam between them. To do this, use a sharp knife. If there is plaster in the opening, it is removed by gently tapping with a hammer.
After that, we take out the entire box from the opening and disassemble it on a flat horizontal plane.
If an extension is screwed to the box, then it is better to remove it. Otherwise, when transporting the elements of the box, the additional bar may break out or damage the box bar.

"inaccurate" dismantling

If you are not going to continue to use the dismantled door and its components for its intended purpose, then the following tools will be enough for you:

hammer
axe
hacksaw
crowbar nail puller.

Below are some of the subtleties and features of "sloppy" dismantling:

It will be more convenient to break the door frame if you cut one of its vertical parts in the middle with a hacksaw.

Attention! It is better to cut the box not directly, but at an angle of 45 o. This will make the dismantling process easier.

If there is a threshold in the box, you can cut it for convenience.
If the threshold is fixed in the opening above flooring, then you can remove it with a crowbar.
Cashing comes off with an ax and a hammer. We insert the ax into the gap between the casing and the box beam. We drive the blade deep with a hammer. We take the handle of the ax to the side. When enough space has formed, you can continue with a crowbar with a nail puller.

Several features of the installation of interior doors

If the opening under the door is made of a metal profile for drywall, then it needs to be strengthened. To do this, before sewing up the GKL, you should put a wooden block inside the profile to which the box will be attached.
Before installing a new door, complete all floor leveling work. At installed box this would be inconvenient.
The gap between the box and the wall should not exceed 2 centimeters. If this distance is greater, then you need to remove the excess with plaster or lumber.
When assembling the box, keep in mind that all cuts are best done at an angle of 45 o.

To summarize: the installation and dismantling of doors is a process that requires careful preparation and accuracy at all stages.

By following these rules, you can perform all operations with your own hands.

The door is the first constructive element of a house or apartment that comes into view immediately before entering the room. Repair or home, office are often accompanied not only by the restoration of finishes, but also by the replacement of doors, entrance or interior. To deal with the types and methods of dismantling, you need to know what types of doors exist and how they differ from each other. That's why you need this material.

What type of door structures are distinguished

Types of doors are determined by:

accessories: entrance, balcony, interior;
the material from which they are made: wood, chipboard / MDF, plastic, metal, glass;
functioning mechanism: hinged, sliding, folding (accordion), retractable.

Each of the designs differs from the other in features inherent in a particular type. This nuance must be taken into account when dismantling the doors. Such work is carried out according to the need to install the door leaf completely or for restoration, followed by installation in its original place. Work related to the removal of doors can be carried out in full or in part, that is, with or without disassembling the door frame.

When replacing the door leaf, which involves dismantling the box, the procedure is performed in full.

Dismantling features

Builders distinguish two main methods of carrying out work on removing doors and call them simply: sloppy and neat.

Using the first, the door frame is sawn at an angle of 45 o. So it will be easier to remove it from the opening. The process involves tools such as crowbar, ax, nail puller.

Choosing the second method of dismantling, get ready for more time-consuming and painstaking work. The main task of the accurate method is to preserve the holistic original appearance of not only the door leaf, but also the box. In this case, you can not do without a screwdriver, pliers, chisels - the most commonly used set of tools at the stage of the upcoming work.

Process details

“To break - not to build” - this is the motto that most of the craftsmen who dismantle doors are guided by. In fact, you also need to break it correctly. Professional removal of interior doors involves carrying out the procedure so that in the end removed doors and the box, as well as the surfaces adjacent to it, were not critically damaged.

Performing such a procedure is not as easy as it might seem, especially if glass or plastic was used as the production material for doors.

When working with such material, it is necessary to be extremely careful, because despite its strength characteristics, modern materials used to release doors may be damaged. Even a small scratch will be noticeable on a matte plastic sheet or a transparent glass structure, and this is just the tip of the iceberg. With careless handling, the door may crack at all, then you will have to buy a new one, and this, as can be seen from the dynamics of market prices for door and window structures, not cheap.

Stages of work

When dismantling the doors, be sure to follow the sequence of work:

Remove the door leaf from the hinges. There should be no problems with detachable and cardboard hinges, and when working with universal ones, you will have to first unscrew the screws.
Remove the decorative plugs from the platband screws, “squeeze out” the latter until the fastening nails appear and the platband is removed.
Remove the box, then remove the fasteners from the structure. Dismantling the door frame is laborious, therefore it requires some skill in carrying out actions. If the procedure is done illiterately, the dismantling of interior doors can lead to a curvature of the doorway, which will later have to be leveled, and this is fraught with additional material costs and prolonging the period during which repairs are carried out.

It is interesting that the scheme for dismantling the front door, interior or balcony, does not differ significantly. Features of the procedure depend on the type of material from which the door leaf is made. Where you can apply force when working with chipboard or MDF, you will not work "to the full" with glass or plastic. Care must be taken here.

Dismantling the doors in the house

Starting each of the processes, it is necessary to observe the stages of removing the doors, the accuracy of the work. It is important not to rush when removing old doors. Be aware that the process of removing them is still easier than installing them, but still requires precision.

In general, dismantling is not difficult, you can do it yourself. Such a move will require more labor, but will save material resources. Or entrust the work to professional builders who will be able to cope with the task without any problems.