Old wooden interior doors. How to update old interior doors: do-it-yourself restoration. Tools and materials for door restoration

During operation, even the most expensive and quality door loses attractiveness after a while appearance. Scuffs, cracks and scratches appear on its surface, and the coating completely or partially peels off. Kitchen and front doors can be covered with stubborn stains that are almost impossible to get rid of. All these problems are easily solved by buying new door. But in the absence of funds to purchase it or unwillingness to bother with installing the door frame, you can quickly and easily restore the door yourself by making it a new original design with your own hands. Thanks to such a creative approach, it will stand out against the background standard doors relatives, friends and neighbors.

The simplest and accessible method updating old doors is to paint it in one or more colors. It does not require large financial investments and special skills, but it does not differ in its claim to originality. Interior doors can be painted by removing them from their hinges, or when they are in doorway. The main thing is to make sure that the paint lays evenly. Painting will take a maximum of 60 minutes. Other methods are more laborious, but the result will exceed all expectations.

Original ideas for decorating doors:

Lamination with self-adhesive film;
Art painting;
Wallpapering;
Finishing with textured plaster or liquid wallpaper;
Upholstery in fabric or leather;
Screen painting;
Decoupage;
Mosaic and stained glass decoration.

Before proceeding with any of the above decorative finishes, you need to do some preparatory work.

Stages of preparation:

We clean the door covered with old paint with a metal spatula. Veneer or laminate doors do not need to be cleaned. If lamination is to be done with a self-adhesive film, then the paint can not be completely removed.
The surface is sanded with fine abrasive paper.
Scratches, potholes and cracks are covered with putty intended for wood.
The door is again sanded, cleaned of dirt and degreased.

Useful tips: how to update the interior door with your own hands

After painting the doors, you can start updating them. Stencil or art painting will help turn even old Soviet wooden doors into a stylish and modern detail interior.

For artistic painting by hand, minimal skills in brushes and paints are required. The ability to subtly convey colors and shades, draw small parts and induce shadows and penumbra. People with artistic talent usually make real masterpieces. If you find it on the Internet or in a magazine beautiful picture and carefully redraw it, you will also get a worthy interior decoration.

For screen painting, it is enough to find a template and carefully apply paint with it. Beautiful ornaments look amazing on interior and exterior doors. You can also make a stencil yourself by following simple tips.

Step by step instructions for making a template:

On cardboard or film, draw a pattern with a thin marker;
Carefully cut out all the details of the ornament;
We fix the template on the surface with glue or adhesive tape;
Apply paint with a brush or roller.

You can buy ready-made stencils in large hardware stores or order them to be made according to a personal project.

Glass inserts: how to upgrade doors without changing them

Alteration of doors with glass inserts is a very exciting and creative process. Inserting new glass is very expensive, so if it is not cracked, it is advisable to inhale into it new life, decorating with stained-glass windows, mosaics or pasting over with a colored film.

If the glass has become cloudy, it is recommended to finish it with a colored mosaic of glass, wood or plastic. Parts are attached to a transparent quick-drying glue. It is advisable to think over the drawing in advance and select color scheme future composition.

You can only work with glass or plastic mosaics with thick gloves.

Stained glass windows look very beautiful and unusual, which can be easily recreated with your own hands using special mastic and stained glass paints.

Master class on creating stained-glass windows:

If the drawing is planned to be complex, then its future contours are drawn on the glass with a marker;
The mastic from the tube is squeezed onto the glass along the contours, and after hardening it is painted with paints with a metallic sheen (gold, bronze, silver);
Stained glass paints are applied in an even layer.

Pasting the doors with any decorative materials not only hide noticeable defects, but give them originality and originality. Even the most shabby door can be completely redone and turned into a real work of art.

How can you glue the doors in a house or apartment:

Ordinary, vinyl, non-woven or textured wallpaper;
Photo wallpapers (plain or with 3D effects);
fabrics;
Self-adhesive film;
Genuine leather or substitute;
Vinyl stickers;
Multi-layered napkins in decoupage technique.

Any paper is short-lived, therefore, after pasting with napkins or wallpaper, it is recommended to varnish the surface.

Wallpaper usually remains after repair, so they can be pasted over the doors of a house or a country house using wallpaper glue or PVA.

Wall murals with the right pattern will help visually enlarge the space and completely change the room.

Fabrics in the interior look very stylish, but you need to be careful when working with them. The glue should not show through the layer of fabric, and all threads and unhemmed edges should be removed inside.

The self-adhesive film should not be glued all at once, but in small sections, gradually removing the protective layer and leveling with a spatula or soft cloth so that bubbles and wrinkles do not form.

You can sheathe the front door with leather or leatherette. Instead, you can also use the popular vinyl leather. It is recommended to fix the material with special carnations with a wide hat or a construction stapler.

Bright vinyl stickers are most often attached to the doors of the bathroom, toilet, kitchen, so that it is more convenient for guests to find the right room.

Doors decorated with decoupage napkins look rich and sophisticated, but with modern styles decorating interiors, they will not look harmonious. Classic, modern, country, provence, baroque are best suited to them.

How to update old doors with your own hands (video)

There are many ways to refurbish old doors so they look like new. And a small alteration will cost much less than installing a new door frame. In addition, there is no need to replace the slopes, they can also be decorated with stones, rhinestones; paint with paints; cover with wallpaper or mosaic.

Before many people who have decided to make repairs in the apartment with their own hands, the question arises of how to update the old interior doors. The easiest way is to replace them with new ones. But, as a rule, in Russian apartments sashes are made of solid wood. Therefore, the purchase of a similar model will be quite expensive.

You can decorate old interior doors with a simple pattern made with acrylic paints.

Even a novice master can repair an old interior door. At the same time, you can independently think over its future design and decor. And then the sashes will look not only updated, but will also become a real “highlight” of your interior. You just need to show a little imagination and be patient.

Carrying out preliminary work

Old doors can be updated with regular painting.

Before updating an old interior door, you should carefully consider its future appearance. It should depend not only on your taste and preferences, but also on the design of the room as a whole. In this case, it is necessary to take into account the interior of both rooms.

Some designers use doors as a unifying element for 2 different decors. Then the sash should contain details that are combined with both one and the other interior. It may be a mixed solution. It is permissible to design an interior door so that each side of it is decorated in its own style.

But in any case, you must first choose the method by which you want to update interior doors. At the moment, there are the following techniques that allow you to restore the door with your own hands:

Change of door cover. This can be painting, decorating with a self-adhesive or laminating film, veneering, finishing with stencils.
Change of the façade of the sash.
Restoration of the door with a simultaneous change in its shape.

Door leaf design.

All of these methods have their advantages and disadvantages. But before dwelling on one or another method, carefully examine the design of the valves itself. As a rule, wooden doors made no earlier than 15-20 years ago.

Related article: Production of a wardrobe to order: design, materials, components

Changing the shape of such a door is quite difficult. And if you do not have sufficient skills in woodworking, then you should turn to professionals. If the design is older, then it can be made of a solid carpentry shield. Such doors are much easier and easier to modify. But most often it is enough just to update the old interior doors and eliminate minor defects. And your apartment will look neat and updated.

Necessary tools and materials

Whatever method of restoration you choose, before you undertake the restoration of the door, you need to carefully prepare it. To do this, you will need the following tools:

grinder (or a special nozzle for a drill);
building hair dryer;
plane;
a set of spatulas (metal and rubber);
a set of sandpaper of varying degrees of grit.

To restore the door, you will need a grinder.

When removing the old layer of oil paint, a building hair dryer helps a lot. The coating softens under the influence of temperature and is easily removed with a spatula. If you do not have such equipment, then you can use special tools designed to remove paint. But they must be handled with extreme care, as an aggressive solution can damage the old door.

To seal large chips and cracks, you will need wood putty. If in the future you are going to completely update the outer covering of the door, then it is not necessary to select a product that matches the color of the wood. Otherwise, you can purchase a special color scheme that will help achieve the desired shade.

Epoxy glue can be used to remove small cracks. But you need to pour it very carefully. Make sure that it does not fall on the canvas itself. Otherwise, the paint in this place will lie unevenly. In addition, in modern stores you can find special waxes to remove small defects. They are much easier to use, and they hide small chips more reliably.

Door panel restoration

To carry out restoration work, remove the door from the hinges, dismantle the handles and locks, remove the glass (if any). If you are repairing old interior doors, then it would be useful to remove the trim and assess the condition of the door frame. If necessary, replace the wooden elements of the racks and props.

Related article: What to cover the plinth with?

Carefully remove the old layer of paint and sand the canvas down to bare wood.

The surface must be smooth and even, otherwise you will not be able to achieve an even coating.

To restore the door, they must be removed from the hinges and all fittings removed.

After each processing step, clean the canvas from dirt, dust and grease. To do this, use dry or slightly damp cloths and brushes. Don't wet the door! And be sure to let it dry completely after each stage of restoration.

Soak the interior door with an antiseptic. Such a measure will help to serve the sash for more than 1 dozen years. Treat chips and cracks. If the interior door consists of several elements docked together, then check the reliability of the connection. Glue the fasteners and tighten them with clamps until completely dry.

Next, the canvas is covered with another 1 layer of antiseptic (or drying oil) and primed. The primer is also applied in 2 layers. Now the sash is completely ready for finishing. Further work depends entirely on which decoration method you have chosen.

If the surface of the door is in good condition, then it can not be painted, but covered with stain. This composition will emphasize the structure of wood and give the sash a classic noble look. Moreover, you can choose a composition containing coloring pigments. Then the surface will imitate expensive wood species: walnut, oak, beech and the like.

Door frame design.

Recently it has become fashionable to leave old wood in its natural form. In this case, the surface is varnished. In this case, you can choose a composition with a tinting, slightly golden effect. Visually, the surface of the door will not change, but the unpleasant grayish tint will disappear. If the door leaf is stained, then it is also varnished. Then the door acquires a pleasant glossy sheen. If you prefer the look of natural wood, then complete the repair with a polishing wax treatment. This coating will protect the sash from moisture.

When repairs are in full swing, and money is running out very quickly, it's time to think about how to restore wooden door. With the help of fairly simple manipulations, you can give a second life to an old door. In addition to saving, you can create your own unique design that fits perfectly into the interior. Restoration of old wooden doors makes it possible to update the interior at minimal cost.

Problems that arise

To find out how to update wooden doors, you need to find out the cause of the damage. The most common causes are mechanical damage and moisture.

Interior doors made of wood often dry out due to vibrations temperature regime and high humidity. The canvas can become cracked and warped. In addition, there are problems with the coating itself. In the case of paint, it can flake off over time. When and using decorative overlays such as laminate or MDF, you should be aware that as a result of contact with moist air, they can peel off. Poorly treated wood deteriorates and is often moldy. In this case, it is necessary to clean the affected layer. The most difficult thing is to restore doors made of fiberboard, since this material cannot be subjected to rough processing.

Preparatory stage

Before starting the restoration of the old interior door, it is necessary to assess the scale of the work ahead. It is necessary to remove the canvas from the hinges, carefully inspect it from all sides, especially from the ends. To make it more convenient for you, you should put it on a flat and clean horizontal surface. If the damage is minor, you can simply open the door with varnish and complete the repair work.

In the event that it is impossible to do without adjusting the base itself, you will have to remove the old lining. The panels are very easy to peel off. How to update an old wooden door covered with varnish or paint? First of all, it is necessary to dismantle the entire coating, layer by layer, until you see clean wood. Fine-grained sandpaper is perfect.

Given that the work is associated with the formation of a large amount of dust, it is worth doing it in the workshop. In the absence of a workshop, be sure to cover all the furniture and the floor in the room with a film. In addition, think about protecting your respiratory organs from small particles of material, you need to put on special glasses for your eyes.

Removal of cracks and chips

Restoration of wooden doors occurs in the following order:

Paint application

Before applying paint, prime the wood. The primer should use deep penetration, or a special impregnation that will protect the wood from destruction, damage by fungus, beetles and mold.

What to use:

With the help of stain, you can preserve the structure of the wood and give the door the desired natural shade. To protect against moisture, it is worth applying varnish at least two layers.
paint with water-repellent properties. In stores there is a wide selection of coloring compositions - glossy, satin or matte.
Specialists know and successfully implement a large number of decorative techniques to create an unusual surface. They are based on the skillful combination of different compositions of paint, varnish and the use of auxiliary materials.

glass insert

Many interior doors have glass inserts. Similar structural elements can also be restored. When using a solid blade, you will be able to embed the glass without assistance.

The sequence of work during the restoration of glass inserts of wooden doors is as follows:

dismantle the glazing beads that hold the glass, and remove it from the opening

if you need to use the same sheet, you need to put it in order. Drops of paint can be removed with a special scraper, acetone or a blade. Scratches can be polished with toothpaste. In addition, you can apply a film with a pattern on the glass, paint it or make a stained glass window out of it.
in a completely finished, restored canvas, you need to insert new glass. It is attached with new glazing beads.

Installation of new fittings

A complete renovation of old wooden doors, made by hand, also involves the replacement of auxiliary parts. In the event that mortise fittings were previously used, then it is worth choosing similar models. The cutouts must match. This is especially true for mechanisms such as knobs, where you need to drill a large hole. After that, the process of restoration of wooden doors can be considered complete.

How to clean wooden doors

How to wash wooden doors in order to extend the period of operation? Detergents can be different, both in components and in cost. The stores offer a fairly wide selection of such funds. However, avoid aggressive chemicals that can damage the surface of a wooden door.

Some prefer to use:

acetone or white spirit
table vinegar
ammonia
lemon essence
clay
raw potatoes.

From household chemicals suitable for the following:

dishwashing liquid
silite
domestos
shumanit
profit.

The order of work is approximately the following:

first you need to wipe the door with a damp cloth
next you need to apply the acquired detergent over the entire surface of the door
more difficult pollution needs to be wiped more intensively
leave the remedy for five minutes
after that, remove the foam and residual moisture from the wooden door. This can be done with a towel or a special cloth.

Such activities will help to clean any wooden door, but if the stains still remain, you will need to resort to the help of professionals.

A few tips:

do not use abrasive powders that damage surfaces
do not leave the detergent on the wooden surface for more than 5 minutes
use a polish based on natural beeswax. This tool will help you keep your wooden door clean and shiny.
greasy and old stains can be removed with ordinary potatoes. You need to cut the potato in half, attach the cut to the stain, and wait a bit. Next, wipe the door with a dry cloth.
oily stains can be removed with a homemade solution - 2 tbsp. spoons ammonia dilute in 1/2 liter of warm water. With this tool, you need to gently wipe the pollution.

Many people during repairs sometimes face the question of how to restore an old door? Often a more appropriate option is the restoration of wooden entrance doors than installing a new door block. This applies more to products made from fine wood.

The process of repair, restoration and restoration has some laboriousness.

However, it allows significant cost savings. Along with this, a well-repaired door block has the appearance of new doors. This increases the service life of the product.

Before starting the restoration work of a wooden door, you need to determine the availability of consumables and tools necessary for the entire restoration process.

You may need the following tools:

rollers, brushes and spatula;
belt sander and sandpaper;
building hair dryer;
screwdriver and a set of screwdrivers;
chisel, file, hammer and planer.

Of the consumables, you may need: a special liquid for flushing with wooden surfaces old paint, sanding paper, planks and wooden slats, metal washers, nails, wood screws, polymer-based adhesive, acrylic putty, enamel, varnish, foam.

The choice of materials for the restoration of wooden doors at home must be carried out, taking into account the type of wood being restored, the thickness of the old paint layer, the presence of distortions, deformations and cracks.

There are cases that it is enough just to remove a small layer of old paint and the subsequent finishing of the door leaf. In other cases, you need overhaul door structure.

Features of the restoration of wooden doors

Do-it-yourself restoration of wooden doors is carried out in several stages. First of all, old paint or varnish is removed. This work can be done in several ways.

Two methods are more efficient.

1. The door leaf is removed from the hinges and the old paint is washed off in a horizontal position. After softening and peeling off the painted layers from the wood, they are removed with a spatula.

Another type of work on the restoration of wooden doors is the heating of sections of the door with a building hair dryer. After that, the old coating is quite easily removed. With this method, work is carried out with individual sections immediately after heating the structure.

Sanding old doors

After removing the old finish with a spatula, wooden doors are subjected to further, finer processing of the door surface, using sandpaper or a belt sander.

It is worth noting that using a coarser-grained sandpaper, a more vivid manifestation of the wood texture is carried out. A perfectly smooth surface is achieved by first sanding the coating with coarse sandpaper and then with fine sandpaper.

Puttying wooden doors

Having sanded the door surface, you can see that various defects have appeared on it - various traces of knots, cracks and chips.

In this case, it is required to apply a layer of acrylic putty intended for wood on all irregularities. In this case, it is required that the putty layer protrude slightly above the recesses and cracks. The fact is that this layer during drying is compared with a wood surface. After that, the door surface is again sanded.

In the case of a rather deep defect in wooden doors, the restoration is carried out a little differently.

In this case, you can glue decorative elements from wood or other material to the damaged area of the product.

Door varnishing

The next stage of restoration will be the coating of surfaces with the selected varnish, paint or other restoration compositions for wood.

In the course of these works, you can use a regular flute brush. However, in this case, a roller having a short pile is preferable. The reliefs are painted over using a narrow, up to forty millimeters, roller with a foam rubber coat. On professional level, at this stage of work, it is better to use a spray gun with an electric or manual drive.

To carry out the restoration of the wooden door leading to the bathroom, it is necessary to more carefully select the finishing materials.

It is advisable to use in rooms with increased humidity and temperature, enamels and varnishes with increased water resistance.

In this matter great solution will use a special yacht varnish.

This material is very resistant to moisture and aggressive cleaning agents.

How to restore lacquered doors?

It should be noted that the restoration of varnished wooden doors has some peculiarities.

First of all, you need to remove the old varnish. Next, all door surfaces and door trims are carefully sanded.

With all this, it is necessary to grind only in the direction of the wood fibers.

No need to press hard during sanding grinding tools to the surface of the product. The next step in the restoration of interior wooden doors is the removal of micro-pollution with a vacuum cleaner.

Varnishing the surface of an interior wooden door is done with a flute brush or a foam swab. In this case, it is not necessary to immerse the swab in a container with varnish. On the contrary, the varnish is applied from the container to the swab.

Varnishing the surface of the entrance wooden door at home is carried out in at least 4 layers.

The application of the second layer can be carried out after 2-3 hours. The remaining layers should dry for at least a day.

During the restoration of wooden doors, you need to be aware that alcohol and nitrocellulose varnishes are very toxic. It is necessary to systematically ventilate the room in which restoration work is carried out.

It is better to expose products to dry in fresh air.

How to restore old doors at home

The first layers of varnish can not be sanded. The next layers require thorough processing.

A day after it is applied last layer varnish, the surface is better to bring polishing. In this case, a palette is used. It is applied with a felt or felt swab.

Movements must be completed at the edge of the product. Polishing is carried out in two days - in stages. During the last step, pure alcohol will serve as the palette. Dolomite powder is mixed in it.

Veneered door repair

During the restoration of wooden doors with your own hands using veneer, you can use veneer with an adhesive base.

It is quite easily glued to the surface with an iron. This work is very painstaking, as overheating can lead to damage to the material. It is better to press the glued finish with a bag of fine sand. This weight will provide a flat surface and even distribution of the load.

Connoisseurs of the restoration of wooden doors with veneer often use curly slats from different materials. This creates the effect of a paneled texture. It is worth noting that veneering in different directions gives the surface a texture. natural wood.

The last stage of restoration is the varnishing of the door block.

This is done with a light matte or clear varnish. This is pretty economical way restoration. However, the door will look very presentable.

Do-it-yourself wooden door repair: tips and instructions

From time to time, you have to correct the shortcomings of the interior and do-it-yourself repair of wooden doors is one of the points. The fact is that such objects in the house are subject to significant mechanical and other influences. Especially it concerns input structures and those that are often in contact with moisture. In this regard, periodic updating of the coating can significantly extend the life of the door, if repair is carried out in accordance with accepted rules.

Over time, any wooden doors need repair.

Possible problems and their causes

During operation, the door can suffer from almost anything.

This also applies to shock, scratches, chemical factors and ultraviolet radiation. All this has to be fixed sooner or later with your own hands or to produce complete replacement paintings, which not everyone can afford.

Let's look at what problems can arise with a wooden door:

Cracks. Usually this happens due to the drying of wood, changes in moisture and temperature adversely affect it, especially with insufficient processing.
Large gaps. May occur due to the drying of the canvas or a change in its position relative to the box.
Mashing.
Swelling of wood at high humidity, distortions in the loops or displacement of the box.
Peeling of the coating. This problem is relevant for doors that were additionally lined with some material, such as veneer or laminate. Paint and varnish can also peel off over time.
Box loosening. A large load on the structure over time leads to a change in its position and weakening of the fasteners. It is also possible due to the destruction polyurethane foam.
Rotting.
Constant contact with moisture, germs and poor antiseptic treatment destroy natural wood.
Chips. They are formed during impacts, especially in the lower part of the ends and in the corners.

Cracks are the most common wood problem.

If you do not plan to change the door and self-repair is beyond your power, you can give the structure for restoration.

Box repair

The most undesirable problem is the destruction of the box, but you can deal with this yourself if you make repairs in time and close all the cracks.

To do this, you will need to temporarily remove the canvas from the hinges. Assess the extent of structural failure and identify the most vulnerabilities. Distortions are easy to notice if you use a building level, plumb lines and a square. Make appropriate notes and get to work.

To eliminate the skew, it is necessary to set the door frame according to the level

First you need to remove the trim and level the loot.

If the foam crumbles, scrape off the old layer and re-foam. For additional reinforcement, the side slats are equipped with dowels. To do this, drill several holes in them along the entire length and drive them into the wall.

If it's about bearing wall repair is somewhat more complicated. You will have to carefully disassemble the box, drill holes with a puncher, and then re-install it.

After you need to close up the traces of interference with special mastic.

In some cases, it may be necessary to re-foam the door frame

Eliminate the shortcomings of the wood canvas

Much more problems can arise during operation directly with the canvas itself, however, it is much easier to fix them.

Let's look at how to repair the canvas of wooden doors with your own hands if its surface is covered with scratches and cracks.

To do this, you will need wood putty, you can find it in almost any hardware store.

Since a wooden door often has a certain shade of rock, you need to choose the mastic of the appropriate color. You can use the grout, which is used when sanding parquet. Carefully fill in the damaged area and rub the dried material with sandpaper.

Cracks and scratches can be puttied with a special compound

Almost the same as a crack, you can close up a hole in a wooden door.

In case of significant damage, mounting foam is additionally used. Doing it yourself is not at all difficult - first the damaged area is foamed, then putty is applied and rubbed off. Repeat the procedure until the surface is completely level.

A small hole can be masked with dowels. To do this, the canvas needs to be drilled a little at the place of the hole, and then the trimmed dowel, planted on glue, is driven into it and the surface is carefully sanded.

But in order to get rid of the gaps, you will need a bar according to the size of the canvas, it is stuffed from the problem side.

Do-it-yourself door restoration - the design will look perfect!

When mashing, you can process the door with a planer. And if it's about the hinges, put a rubber gasket under them at the junction of the halves.

Fiberboard repair

Now let's look at how you can repair a fiberboard door.

This material is thinner and more flimsy, therefore, the corners of the canvas often suffer, in which case the defect can be repaired using a small piece of plywood. Cut off the damaged part in such a way that you can easily substitute your workpiece in this place, you can glue it or use small carnations without a hat.

And how can you patch up a hole in a fiberboard door with your own hands?

If we are talking about a broken part, you can use a wire, a hook is made from it, with which the broken part of the fiberboard is hooked, then both edges are treated with wood glue or PVA and pressed against each other. After drying, clean the seam and process the top with a fixative. You can similarly make a patch by cutting out a square of identical shape from fiberboard and inserting it into place of the cut damage.

If large holes need to be repaired, the door leaf will need to be repainted.

If the hole is quite large and there is no way to seal it, use the same method as for wood.

Repair is carried out using mounting foam, volcanic rubber, putty and sandpaper zero.

Chipboard repair

A common problem with chipboard doors is soaking and delamination, how to repair such a door with your own hands? To do this, you will need glue and a syringe.

The fabric is recommended to be removed from the hinges. Using a syringe, pour glue into the structure of the delaminated material, then press the sidewalls and put the door under the press. When the glue dries, cover the edge with protective tape to prevent re-destruction.

Delamination is the most common problem chipboard doors

Chipboard doors are not very reliable, they are not recommended for use in rooms with increased level humidity.

decoration

You need to complete the door repair by restoring the coating, this can be done in several ways:

If we are talking about a wooden door, repairs are best done using already tinted putty, in which case it will be enough to open it with varnish.

You can update the surface with a stain. Be sure to treat the door leaf with a water-repellent antiseptic. If we are talking about a painted canvas, there should be no problems at all, the main thing is to choose the same color of the composition. If you decide to patch the hole with a patch, you can apply a masking pattern over it.

Door defects can be easily masked with a pattern or sticker

For chipboard, an excellent way out of the situation is to replace the front cover; laminate is usually used for this purpose.

However, wooden doors can also be updated by lining them with veneer or film, at the same time you will be able to repair minor defects.

High-quality repairs will allow you to close up visible flaws and extend the life of the structure as a whole.

Old, but good-quality wooden doors cannot always harmoniously fit into the newly renovated premises. In this case optimal solution will be the restoration of wooden doors, since the financial costs of acquiring and installing a new door block significantly increase the already quite significant costs.

In addition, the ordered joinery is often delivered unfinished, and you have to do almost the same work with it - sanding, puttying, painting and drying.

Tools and materials

To carry out the work, it is desirable to allocate separate room, since the processing process is quite dusty and takes a lot of time.

It is advisable, in this case, to equip the work surface in advance, on which the door removed from the hinges will be repaired.

It will also be necessary to provide an inflow fresh air or organize, if possible, painting or varnishing work outside the premises, for example, under a canopy on the street.

When repairing doors you will need:

industrial dryer. A powerful building tool will greatly facilitate rough work and prepare the canvas for further restoration;
putty knife.
To remove old paintwork, a spatula with a metal working surface sharpened at an angle on one side is best suited. And for applying putty, in order to avoid damage to the door leaf, you should prepare a rubber or silicone spatula;
belt sander.
If such a tool is not at hand, then it will be quite possible to get by with a set of simple abrasive skins;
wood putty. For painting the canvas, its color does not really matter. But if, after the restoration of a wooden door, it is planned to cover the surface with varnish, then the color of the putty is selected to match the tone of the wood;
paints or varnishes on wood.
Heavily damaged, cracked doors that require the application of a large amount of putty are best prepared immediately for painting.

In addition to the above, an electric drill or a screwdriver, a hammer, a chisel, a crowbar, a sufficient number of screws and nails, a set of brushes and rollers for painting should always be at hand. The selection of tools and materials should be made taking into account the type of wood and the thickness of the old applied paint layer, the presence of deformations and cracks on the door leaf.

Before starting repairs and restoration, you should take care of purchasing new fittings - door handles, locks, loops.

When choosing, it is important to try to choose a new fitting that is commensurate with the old one.

Otherwise, you will have to re-embed, drill or build something up.

It is best to get rid of used platbands. New products will be inexpensive, and the effort spent on restoring old planks will not justify the time spent.

Purchased platbands can be immediately sanded and primed, thus preparing them for painting.

Removing old paintwork

A door that has been painted many times has a rather thick layer of old paint, which can be quite difficult to peel off. The removal of the coating of the master is carried out in several ways:

chemical;
thermal;
mechanical.

At chemical way special washes are used to remove paint, softening the surface layer, which is then easily removed with a spatula.

It should be borne in mind that the chemical action of the reagent after applying the composition will continue until the active substance has completely evaporated.

Therefore, in order to avoid re-treatment, home masters are advised to cover the cleaned surfaces with a layer of cellophane film in order to retain the volatile substances of the applied wash for as long as possible and prolong the reaction time.

Attention!

A large amount of toxic substances released requires the mandatory use of personal protective equipment and ventilation of the room.

When choosing different liquids, it must be remembered that each type of paint has its own specific mixtures. The most effective is the use of gel solutions. Their composition prevents rapid evaporation and has a higher concentration of the active substance, which helps to reduce the wash consumption.

The thermal method of removing old paint means preheating the treated layer, followed by its removal with a spatula.

For work, in this case, use an electric building hair dryer or a blowtorch.

Working with an industrial hair dryer requires some caution, as it heats the surface up to 600 degrees. small plots heated until the coating softens and swells, after which the layer is removed with a spatula.

The remaining segments of the old paint are removed with sandpaper.

Attention! The use of a blowtorch indoors is a fire hazard!

The mechanical method is more suitable for processing smooth varnished doors. The layer can be easily removed with a belt sander, but the repeatedly painted canvas is difficult to mechanical impact.

Grinding the surface of the canvases

The main purpose of sanding when restoring a wooden door is to finally remove the remnants of old paint.

With the help of a grinder, you can quickly and efficiently remove an unnecessary layer, and first you need to process it with coarse-grained emery tape, which also helps to show the texture of the treated wood. The surface is brought to maximum smoothness with fine-grained sandpaper. Convenience in handmade the application of wooden block with sandpaper stuffed on it.

Grinding is necessary without transverse, circular and diagonal movements - only along the direction of the wood fibers.

Repair and elimination of defects

On polished and cleaned doors, certain defects appear in the form of cracks, chips and scratches. To eliminate small cracks, you can use acrylic putty on wood or a special wax pencil.

Acrylic putty, being an elastic and moisture-resistant material, protects the wood from drying out and levels the chips.

It must be applied with a rubber or silicone soft spatula, carefully filling the voids. The applied layer should protrude slightly above the surface of the door leaf.

After complete drying, its residues are removed with fine sandpaper.

When covering the door leaf with a transparent furniture varnish, you should be especially careful about the final finishing of the surface, choosing the color of the putty to match the wood.

Repair of rotten areas is carried out by completely removing unusable segments, followed by the installation of wooden patches on them.

Masking of problem areas is carried out using acrylic putty on wood.

Priming and painting doors

Priming and subsequent painting should be carried out with the door leaf in a horizontal position, which will ensure a more even distribution of the compositions and prevent smudges.

For a reliable setting of paint with wood and to obtain a high-quality coating, it is recommended to prime the door. A deep penetration primer will help to strengthen the material and reduce the subsequent consumption of the applied paint.

Primers and paints can be applied in various ways:

spray gun;
brush;
foam roller.

The use of an airbrush significantly saves the consumption of materials, but its use requires some skill and a separate room.

The tool does an excellent job of processing the installed decorative elements on the door leaf, avoiding excessive sagging.

Painting the surface with a brush should begin with the processing of the relief sections of the door leaf - from panels and protruding elements.

For these purposes, you can also use a narrow, up to 40 mm, foam rubber roller. It is necessary to apply paint along the wood fibers with confident strokes, trying to distribute it as evenly as possible over the entire surface. After staining, complete drying of each of the layers will be required. Its time period is indicated in the instructions posted on the bank.

After the final setting of the last applied layer of paint or varnish, the restoration of wooden doors for someone may be considered complete, but this is not entirely true.

The last step in the work will be the installation of the door leaf on new hinges, inserting the lock and installing door handles.

Repair of the door frame is usually not required, but if necessary, restoration is carried out using the technology described above. It should be noted that the dismantling of the box is performed only if it is planned to do general repairs in the room.

You should also pay attention to the fact that the vertical racks of the door frame, which have chips at the hinge locations, will have to be definitely replaced.

06/15/2015 at 10:06 am

Category: Repair> Doors> Upholstery
Date: 2012-04-15 08:04:09
If your metal or wood door has been ripped off and you're looking to update your look, you don't have to shop around looking for new entry doors. This is a great option Laying doors with veneer by hand. Veneer will be suitable finishing material for any door.

Its leaves of small thickness, made of natural wood, can safely hide all defects, and the doors will not differ from the new one. And if veneer with cheap door then you can extend the service life. Veneer is considered a high quality and versatile material. Door cladding helps to make them easier to care for, increases the time of their use without spending large sums of money.

For veneer doors, you need to stock up on the following materials: putty, veneer, syringe, ruler, small beam, paper sample, coarse and wood glue.

When it is necessary for you, please feel free to work.

We keep on tiling

At the very beginning, remove the door from its hinges and place them on dirt or a table. After that, the door must be released from all accessories.

Fix it in all depressions and cracks. This task will help you master the kit. Check the product carefully and if you find an imbalance, cover it carefully. Pull the whale after dry.

Only now can you continue gluing a door with veneer by hand. Don't stick to veneer. It's better to make a paper sample first, then transfer it to the veneer, and then start cutting.

When the veneer is ready for gluing, the surface should be sanded to inside, and if you find small cracks, remove them from the whales.

While the dew is dry, you can start making carpentry glue. When the adhesive is ready for use, it is treated with the inner surface of the veneer and the part of the door that is glued to the veneer.

After that, wait about 10 minutes and connect the door to the veneer.

What to do for safe bonding

Now after a third of an hour, iron veneer from the middle to the edge to the edges. You must press the beam hard, but do it carefully. Do not forget that the beam must not only be, but also not contain fragments. If the iron is heated to 50 degrees, then they can walk in veneer.

If you find that air bubbles form under the veneers, carefully cross them and insert the adhesive into the cavity in the syringe.

Align such cutting immediately. Better than cutting, you need to clean the veneer room with water. When the veneer is level, the door stays dry. The temperature in this room should be at least 25 degrees.

After a few hours, when the glue is completely dry, you can start installing the locks and handles.

Now you can install the door in a different place.

apparently do-it-yourself door gluing with veneers is not something impossible.

Do-it-yourself interior door restoration

Basically, anyone can do it. So don't worry, but remember that it's best to follow the instructions above.

The article presents LLC "Alremont"

AllRemont repair portal for Moscow and all of Russia This site is intended for those who intend to carry out repairs on their own ...

IN wooden house, basically, and the doors are made of the same material, which undoubtedly looks very attractive. Unfortunately, the age of such beauty is not long, especially if the doors were covered with paint or varnish. Both coatings have a not very good property to peel off, and they do it unevenly, leaving ugly “glades” with peeling paint on the surface of interior doors. The doors themselves are still in excellent condition, work perfectly, and are not going to fail. Throwing wooden interior doors into the trash is too expensive a “pleasure”, because you can restore a wooden door with your own hands without even resorting to the help of craftsmen.

Doors made from natural wood are quite often perfectly preserved under a layer of lacquer coatings or dyes. Why not? You protect your wooden house with the help of its coloring from rotting, bark beetles and larvae, so your doors have been preserved in their original form precisely thanks to protection. Now you are faced with one, in truth, a grandiose task: to clean the surface of varnish or paint. At the same time, not only to completely destroy all traces of their presence, but also not to spoil the array, so that you definitely do not have to throw away the still invaluable structure.

Removing varnish

Let's talk first about the easier problem: the destruction of the varnish. On the shelves of shops you can easily find an abundance of solvents, which no doubt will do an excellent job, if, of course, you make the right choice.

1. Buy a composition that is designed specifically for wood, work with it slowly and very carefully.

2. Do not forget that some types of solvents not only remove the varnish from the surface, but also smear it on the wood.

3. Do not try to clean the entire door at once, do it in parts.

5. Try not to impregnate the material with solvent.

Getting rid of paint

Removing paint, especially if it lies in layers, can be extremely difficult and you will need a lot of patience. It is possible that you will have to go through several methods before you cope with the task. Do not despair, but feel free to get to work, you will see what an excellent result will be. Let's look at all the options for removing the old paintwork.

Method one: chemical

These include all the same solvents, only now they will be assigned to wash off the paint. There are several such substances, and each can save your doors from a certain type of dye: oil, nitrocellulose or acrylic. If you know exactly what composition the surface was painted with, you can breathe a sigh of relief: you are very lucky and you have saved time, effort and finances. If you doubt its nature, then you will have to try all types of solvents in turn before you can restore a wooden door with your own hands.

Such work should be carried out, if not in a gas mask, then in a mask, it is necessary, because the smell of all substances is very caustic, and some especially. Remember to wear gloves and "kick out" all family members and animals from the house. Having inhaled plenty of fumes, they can get poisoned. As you can see, the task is serious, especially since solvents will have to be sorted out one by one, which will take a lot of time.

Another nuance: the price of washes is quite high, and not a small amount of them will go to the door. Before buying a large batch, make sure that this is exactly the substance that you need.

Method two: mechanical

"Mechanical" in this case means: do it yourself with the help of simple tools. Take a chisel, knife or scraper and start cleaning the surface. Work slowly, carefully, moving in the direction of the grain of the wood. Back and forth motions will result in burrs, scratches, and ripples, and you want a perfect surface. Sandpaper (sandpaper) and, of course, a grinder clean off the paint well. If you were removing paint on the floor, you could use a grinder with an emery wheel, but the door still requires a more subtle approach.

Method three: heating

The thermal method is as old as the mechanical method, and no less reliable. The paint does not like heat and at a certain temperature begins to melt. At this point, it is easy to remove it from any surface, especially wood. What can melt the coating without damaging the surface of the door?

Firstly, it is a blowtorch, with which the paint is simply burned out.

Secondly, a building hair dryer, which softens the dye and allows you to scrape it off with a spatula or scraper.

Thirdly, the usual iron of the old design. Why old, so because it is heavy and will be pressed closer to the surface. Take the usual foil, put it on the door section, put the hot iron on and wait for the paint to heat up. When heated and melted, the dye will stick to the foil and stretch with it. If you put the iron on the fabric, as is sometimes advised, then the paint will not stick and you will again have to scrape it off with a scraper after the first bubbles appear.

After you have tried all the proposed tools, stop at one of them and, in the end, get rid of the paint, you need to move on to preparing the surface of the doors for restoration.

Surface preparation

What are you striving for and what should you get as a result? You absolutely need new surface, which will be devoid of all vices, will become even, smooth and will reveal to your eyes the excellent quality of the tree. To do this, the door needs, first of all, grinding.

Pick up sandpaper with large grains and start grinding, not forgetting the direction of the fibers. Then change the skin to a smaller one, and then to a very tiny one. Sanding is carried out very carefully, especially in hard-to-reach places. By the way, did you forget to remove the fittings before starting work? Very convenient to work grinder, but if there is none, then you can do the entire grinding procedure with your hands.

Cracks, chips and other defects are perfectly masked with acrylic putties on wood. They come in a variety of colors and you can always choose the color you want. If the defect is so large that it cannot be disguised, you will have to stick an overlay. It must match the type of wood and have a solid shade, otherwise the restoration of the door with your own hands will become like patching holes.

Restoration

Here you come to the end of the story with old door: restoration, although everything that you have been doing up to this point, in fact, is what it is, and this is just the final stage. For him, you need to choose from the abundance of paints and varnishes the one that will decorate the doors in a wooden house. In addition to colored dyes, it is possible to use old acquaintances: stain and varnish.

The best method of applying stain is with a spray gun. Its use is limited to the fact that you are indoors. Take the door to the site and work there. Lacquer is applied in the same way.

In confined spaces, stain is applied with a sponge or synthetic brush. Excess substance or its clots must be immediately removed with a clean cloth. The varnish can be applied with a roller and brush. All auxiliary tools must be of high quality, and not leave stains, smudges and villi on the surface of the doors.

After the paint, stain or varnish is completely dry, you can put the fittings.

Door frame restoration

As you understand, the door does not hang in the air by itself, but interacts with door frame which also needs to be restored. It is possible that someone will decide that it is better to buy a new product than to mess with the old one, but .... Any tree, even the best, deforms over time: gaps form between the sash and the frame, the tongue of the lock does not fit well into the hole for it, the door leaf sags. Replacing the old design with a new one will only aggravate the situation, since it will not fit the updated door at all. In this situation, it is better to correct both components: the doors and the box, and not change the latter. So, with the door frame, you will have to perform the same manipulations to get a single ensemble, plus fit it under the door.

We figured out how to restore a wooden door with our own hands. The work has been completed and in front of you is an updated interior door, which you so wanted to get rid of at one time. And all you had to do was be patient, make an effort and follow the technology of the process.