What can be done from clamshells. Do-it-yourself shelter for seedlings from a folding bed. New life for an old bed

The early organs determine the state of health of the bird, and if everything is fine, they are also sent for sale. Cut off the liver, gallbladder; the heart is cut and blood clots are removed; the stomach is cut and the shell is removed from the inside; paws are immersed for 2-3 minutes in hot water or singe, after which they remove the skin and cut off the claws; the heads are singeed or scalded, the feather stumps are removed, the eyes are taken out and the beak is chopped off; scalded scallops, remove the film and feathers at the base with salt, soak in the presence of blood spots; necks and wings are cleaned of stumps.

The bird has been domesticated by man for a very long time; over the past centuries, tremendous experience has been accumulated in its cultivation and maintenance. It is simply impossible to cover everything in one article. Breeding work on the development of new breeds and crosses does not stop. Work continues on the selection of feed compositions and the introduction of new light and temperature-humidity regimes. In the near future, apparently, the bird will be even more precocious, hardy and prolific.

A.I. GERASIMOV

Old folding bed - a treasure for the craftsman

Metal tubular elements and connections from end-of-life folding bed frames can form the basis of many home-made devices. Such frames with a worn canvas are often taken out for

sent for scrap or landfill. As a rule, frames are made of duralumin tubes, which are easily processed with home metalwork tools (hacksaw, drills, files, etc.). The easiest way to assemble from such parts with some modifications folding tables, armchairs and chairs. These products are light, take up little space when folded, are convenient for transportation in public transport or in private cars, are quickly brought into position and quickly dismantled. It is advisable to use such devices in garden plots, in summer cottages, especially since you can not find the necessary devices in stores, and they are very expensive. A feature of homemade products is that, due to individual distinctive characteristics and appearance their devices, as a rule, are not “privatized” by outsiders, who often penetrate into private property, while purchased standard products usually end up with new “owners”.

Using the principles and solutions outlined below, you can assemble the necessary items on the farm with your own hands. useful homemade. It is hardly advisable to copy devices, since something can always be changed and improved. Therefore, initially you should sit and think, design product options on paper, choose acceptable technical solutions, taking into account the available tools and the possibility of buying or ordering some parts on the side, and only then start work.

Folding table

On fig. 1 shows the tubular frame of a folding bed (for adults) with the tarpaulin sheet removed and the springs securing the sheet along the perimeter to the top of the frame in increments of about 70 mm. Each pr

Not all people have spacious apartments that fit a large bed, wardrobe, and other necessary pieces of furniture. Often a double bed takes up almost all the free space in the bedroom, so it is impossible to place other furniture there. Of course, this option will not please anyone, so some tend to make a bed with their own hands, which will be compact, comfortable, unique. Owners small apartments usually choose folding beds that can be easily assembled and disassembled. Let's find out how to make such a design with your own hands.

Owners of small apartments usually choose folding beds that can be easily assembled and disassembled.

Before deciding to make a folding bed yourself, you should consider the advantages and features of this design:

• a piece of furniture will have the desired shape, dimensions that fit the dimensions of the room;
• you independently monitor the quality of the elements used, the assembly;
• this option is much cheaper than buying a finished product;
• self-made clamshell can be placed anywhere;
• the construction does not require things that are difficult to find on sale.

Before deciding to make a folding bed yourself, you should consider the advantages and features of such a design.

When we buy furniture in a store, it is difficult for us to assess how high quality and reliable it is. For this reason, it is more reliable to build it yourself using quality materials. This is possible only if you have the appropriate knowledge and skills.

When we buy furniture in a store, it is difficult for us to assess how high quality and reliable it is.

Varieties of folding beds

It should be noted that folding beds come in different types:

1. French. The design consists of 3 parts like an orthopedic lattice. It also includes a mattress and foam rubber, the thickness of which is 6-10 cm. She does not have folding head restraints. Such models are usually made of steel.

It should be noted that folding beds come in different types.

2. American. Removed in two additions and folded in half. This folding bed is equipped with a spring block and a reliable mechanism. The headrests "go" into the back when the bed needs to be removed.

This folding bed is equipped with a spring block and a reliable mechanism.

3. Italian. Consists of two additions. The mattress, as a rule, has a width ranging from 14 to 18 cm. This is a bed of increased comfort. The system has an orthopedic grille, straps and metal mesh.

For self-manufacturing more suitable options, consisting of two sections.

For self-production, options consisting of two sections are more suitable. The mattress needs to be purchased separately. It is fixed with the help of special fasteners or simple Velcro. The last option is more convenient. This bed can withstand loads up to 150 kg.

The mattress needs to be purchased separately.

How to make a folding bed with your own hands: what do you need for work?

Folding bed, carefully made according to all the rules with your own hands , looks more attractive than the market option. If made according to the rules using high-quality elements, such a bed will last a dozen years. In addition, such a piece of furniture will allow you to comfortably accommodate a guest who stays overnight.

A folding bed, carefully made according to all the rules with your own hands, looks more attractive than the market version.

A hand-made folding bed will delight you for many years if all the rules and nuances were taken into account when creating it.

If you decide to make such a do-it-yourself sleeping structure, you need to decide in advance what materials you will use to make it. For this purpose, metal, solid wood or MDF fiberboards are suitable. For those who want to build an economical option, the last option is perfect. They are inexpensive, but they perform well in operation. Designs made of such materials serve for a long time and look attractive. They have an average density, so the bed of them will withstand medium loads. It is easy to work with such raw materials even for an inexperienced master.

In addition, such a piece of furniture will allow you to comfortably accommodate a guest who stays overnight.

A do-it-yourself wooden folding bed is much more profitable than a metal version, since the former is more environmentally friendly and retains heat better. Let's stop on a folding bed from MDF. For further work, the following set of tools is required:

• tape measure;
• circular saw;
• marking pencil;
• grinding corner;
• drills;
• sandpaper;
• goggles for protection.

If you decide to make such a do-it-yourself sleeping structure, you need to decide in advance what materials you will use to make it.

When everything is assembled, you can start work. Before you make a clamshell yourself, you need to study in advance all the features of such work, as well as the sequence, so that the finished product meets expectations.

For this purpose, metal, solid wood or MDF fiberboards are suitable.

Such a product can be built for a bedroom or for a room in a country house, replacing an old and non-functional sofa with it.

More about the technique of making a folding bed

So, it is necessary to start making a folding bed with your own hands from the drawings. After all, a do-it-yourself clamshell, the drawings of which are not drawn up or prepared according to the rules, will be unsuitable for full use. First do the calculations, and then proceed to assemble the structure. The sequence of actions here is as follows.

• Of the materials, you will first need two load-bearing boards corresponding to the length of the mattress.
• Depending on its dimensions, it is required to cut boards of the appropriate length. These are the future "sides". Note that the crossbars should be slightly longer than the width of the mattress. They need to be connected to the carriers using self-tapping screws.
• Then you need to connect the back wall.
• Next, a shelf is made where the base is attached. The shelf must be fixed inside the box using props.
• After you need to make a box under the mattress with your own hands. This will be a frame with approximate dimensions of 100x1450x1980 mm. It will need to be attached in the middle of the bottom. For the manufacture you will need 2 side and 2 end boards. It is necessary to make folds in advance, using self-tapping screws. After the frame is assembled and the bottom is nailed from a sheet of plywood.

Designs made of such materials serve for a long time and look attractive.

After all the above do-it-yourself operations, you can begin to make supports. When pushing the bed, it is necessary to install supports from a bar with a section of 40 by 100 mm. With the help of prepared loops, the supports must be attached to the bottom. Next, you need to let the parts dry well. The mechanism of folding / unfolding is chosen at your personal discretion.

It is easy to work with such raw materials even for an inexperienced master.

At the final stage, it is desirable to decorate the product, since “naked” it will not look as attractive as we would like. For this purpose, blinds can be used to cover the beam supports. You can also make sliding supports. This is an alternative.

A do-it-yourself wooden folding bed is much more profitable than a metal version, since the former is more environmentally friendly and retains heat better.

It is recommended to use a decorative latch for the best fixation of the bed when closed. Thus, you can protect yourself from arbitrary unfolding of the bed, because it is dangerous, uncomfortable to sleep on such a bed. In view of this feature, it is necessary to take care in advance that the folding / unfolding mechanism works properly.

When everything is assembled, you can start work.

Often, those who build a bed on their own from materials such as MDF are worried that the linen and the mattress will slide off when unfolded. It is necessary to stock up for fixing belts 30 millimeters wide on both sides. Velcro should be fastened before lifting the bed.

So, it is necessary to start making a folding bed with your own hands from the drawings.

The mechanism of folding / unfolding is chosen at your personal discretion.

If desired, a finished folding bed made by oneself can be painted in an original way or decorated with decorative items. It is only important that the bed fits the interior design. If the room is in the style of minimalism, then the folding bed should contain elements of this style.

First do the calculations, and then proceed to assemble the structure.

After all the operations performed by your own hands, you can begin to make supports.

As you can see, building your own bed for sleeping is not as difficult as it might seem. A hand-made folding bed will delight you for many years if all the rules and nuances were taken into account when creating it.

Depending on its dimensions, it is required to cut boards of the appropriate length.

Such a product can be built for a bedroom or for a room in a country house, replacing an old and non-functional sofa with it. The main thing is to approach the work responsibly and follow the sequence of actions. Then it will be possible to produce a durable, durable product. If desired, you can use ready-made sketches, according to which it is much easier and more convenient to build a bed. The most important thing is that the design fits freely in the room, looks functional, presentable.

After you need to make a box under the mattress with your own hands.

VIDEO: Homemade folding bed - 1

Clamshells are a versatile item, after the expiration of which, there are also many uses. However, the prevalence of the named object is still being spent, as it is being supplanted by new constructions. Indeed, in modern world more and more advanced products.

REFERENCE! In order not to be inferior in fashion, you can discreetly decorate old furniture, thereby giving a certain individuality to the home interior.

In this article, we will analyze the most popular methods that even an inexperienced master or beginner can handle.

What can be done from an old folding bed

To begin with, let's analyze the simplest method of transformation, namely into an ordinary bench, even one person can assemble it, and about two people will withstand the structure. To build a structure, you must perform the following steps in a specific order:

1. First of all, the main part of the device is cut out. She won't be needed anymore.
2. Next, you should arm yourself with plywood to form the back and seat. To give maximum strength and reliability, it is worth fixing each part with a fastener.
3. Thus, you should have an updated bench that will last for some more time. You can also take it with you to nature or just to Vacation home. This recommendation due to the fact that the device is easily folded, which is so important in the use of structures in the open air.

In addition, you can create your own sunbed with the same success. For this it is desirable:

1. Just as in the previous version, it is necessary to eliminate the main part.
2. Then you should buy bars and process them with sandpaper. This is necessary in order to eliminate the uneven surface and form a smooth one. Thus, users will be guaranteed security.
3. The next step is to proceed directly to the assembly of the structure. Namely, the connection of each part with each other. This is done with the help of special fasteners. It can be both various nuts and bolts, screws.
4. The activity itself is the placement of each bar product - in a certain order. The main thing is to keep your distance. It should not be too narrow or wide.

Thus, from an initially old and unnecessary clamshell, you can create a completely new and exquisite thing that can not only decorate the interior of the room, but also come in handy in a really necessary situation. So, as mentioned above, the unit is quite convenient to use in nature. However, in this case, processing is required. This is due to the fact that there is a high probability of damage due to the mass of various insects and high humidity.

When the life of the famous universal item - a clamshell, expires, it's time to come up with new version its use. Previously available in almost every home, over time, a lightweight folding bed is inferior to more modern counterparts. Improved products conquer their owners, but still what can be done from an old folding bed?

To keep up with fashion trends, everyone is able to make an inconspicuous decoration of old outdated furniture, thereby giving individuality and comfort to the home interior.

This article is devoted to the simplest and most affordable ways that both a novice master and a novice designer can do.

New life for an old bed

The easiest way to transform an old folding bed is to turn it into a regular bench that can support two people. One person can assemble such a structure by performing simple steps according to the following instructions:

1. The first thing to do is to cut out the main center section of the former cot because it is no longer needed.
2. The seat and back are cut out of plywood specially selected for the thickness. To make the new design as strong and reliable as possible will allow careful fixation of each part with the help of fasteners.
3. If everything is done correctly, the result should be a brand new bench that can last for a long time. Such a product can be easily taken with you on a picnic, outdoor recreation or transported to a country house. It is easy to fold and unfold, which is very appreciated when choosing a bench for outdoor recreation.

In the same simple way, you can easily assemble a new sunbed. This will require:

1. To begin with, also completely cut off the old base - the central part of the clamshell.
2. Select the bars and carefully process with sandpaper. Thus, unevenness on the surface is completely eliminated, and it becomes smooth and safe for everyone who will use the future sunbed.
3. After preparing all the parts, the next step begins - complete assembly new design. To begin with, with the help of special fasteners, each individual part is attached to each other. As fasteners, you can use screws and screws, bolts and nuts.
4. It is important to strictly follow the assembly instructions - correctly place each prepared bar in its own specific order, observing the required distance, which should not be too narrow and not too wide.
5. After complete assembly carry out processing with building varnish, allowing the structure to last for many years. This method can guarantee protection against the appearance of rot and minor surface damage.

Therefore, with such a simple method, you can turn an old and unnecessary folding bed into a completely new, cozy and useful thing that will decorate the interior of the house and come in handy in some unexpected situation. For example, it will be indispensable on a trip to nature. By the way, in this case, it is necessary to treat the surfaces, as this will protect the updated folding bed from the appearance of minor damage, the influence of high humidity and insects.