Toilet decoration: types and design ideas. Finishing the toilet with plastic panels: preparatory work and a step-by-step do-it-yourself finishing process What is the best way to finish the walls in the bathroom

Tiles are traditionally used to decorate the walls in the toilet. How to finish the walls in the toilet, except for tiles, you need to choose based on the conditions of high humidity in this room, because walls can be laid out with ceramic tiles in rooms with any humidity indicators (including direct contact with water).

The repair of the walls in the toilet itself is not difficult, since it does not require high costs on materials due to the small area of \u200b\u200bthe room. Despite this, the desire to create a practical and aesthetic space that meets modern requirements is understandable.

Mosaic finish goes well with ceramics

Considering the certain microclimate in the toilet room, it is necessary to use materials that can maintain their qualities in conditions of high humidity and possible multiple temperature changes to decorate its walls.

Such materials that can not only transform the space in question, but also withstand the negative effects of the external environment, can be the following:

tile;
wallpaper;
liquid wallpaper;
painting;
plastic panels.

Regardless of the accepted option for finishing the walls of the toilet, it is necessary to provide and implement a ventilation system, the high-quality work of which will allow any material used for, long time maintain their best performance.

Wall cladding with tiles

Lay tiles only on leveled walls

This is the classic and most sought-after option for finishing the walls of the toilet. Tile has high strength characteristics, is not afraid of contact with water and is represented on the construction market by various and numerous collections.

For its reliable and high-quality operation, it is necessary to follow the technological sequence when laying it and the following recommendations:

First you need to level the surface of the walls using plaster compositions, then finish them with putty, primed, and only then proceed with laying the tiles.
Before installing the tiles, it is also necessary to hide all engineering communications. If necessary, they can be closed with gypsum boards, and lay tiles on the gypsum board.
Next, the tile itself is laid directly on the mortar or glue. To perform this work, experience and a certain skill are needed. Each tile to be laid must lie exactly in the same plane with the elements laid out earlier, the seams between them must be the same.
Grouting joints between tiles is carried out with a special composition harmoniously selected in accordance with the existing interior composition.

In the absence of certain skills, it is more expedient to entrust the high-quality finishing of the walls of the toilet with ceramic tiles to specialists.

Wall decoration with wallpaper

Choose moisture-resistant washable wallpaper for the toilet

The choice is not in the selection of cheap or beautiful material, but with the characteristics necessary for operation in conditions of high humidity.

The possibility of using certain types of wallpaper for pasting toilet walls with them can be determined by the characteristics indicated in the table:

№	Type of wallpaper	Characteristic
1	Paper	Paper wallpapers purchased for finishing the toilet should have a hydrophobic coating to prevent the walls from getting wet and the possibility of wet cleaning.
2	Vinyl	This coating can give the toilet a beautiful and solid look. Use should be options that have a smooth surface for ease of processing. The material used for their manufacture is strong enough and does not get wet.
3	fiberglass	Contribute to the creation of a pleasant interior in the toilet. Do not collapse under the influence of moisture. Tolerates exposure to detergents.

When using wallpaper to finish the toilet room, it will not be superfluous to make ceramic tiles places where it is most likely to come into contact with water. Also, such places can be made of plastic or decorative stone.

Liquid wallpaper will look very nice in the toilet.

In addition, they tolerate the effects of water well and absorb water vapor, leaving no odors in the room and not accumulating them in the walls, thereby creating a favorable microclimate, which will be maintained by regular washing of the walls.

Wallpaper mass is conveniently applied with a transparent grater

Can be applied to various surfaces:

drywall;
brick;
glass;
ceramic tile;
plaster.

For application liquid wallpaper on the walls, it is necessary to follow the manufacturer's instructions for the preparation of the mixture and recommendations for the implementation of this type of coating:

Dry components are thoroughly mixed in water in accordance with the sequence indicated in the instructions.
Decorative elements are added to the prepared solution.
A small amount of the mixture is applied with a metal spatula to a test area to determine its workability.
If necessary, the composition is adjusted.

Using liquid wallpaper, you can create amazing compositions due to the possibility of creating different colors and various textures for this coating, as well as adding wool, cellulose, cotton and other decorative elements to the composition of the fibers.

Wall painting

Painting is the easiest way to finish

In the toilet - the simplest and most easily feasible finishing option. The ability to use a wide range of color compositions and texture solutions allows you to realize the most daring and unique design projects.

Painting technology is known to all. For its high-quality implementation, it is necessary to pay more attention to the preparation of the base, which should be carried out in the following sequence:

first, the surface is plastered;
after it dries, the first layer of putty is performed;
then finishing putty is made;
the prepared surface is treated with primers;
then painting is done. For more information on how to paint walls, see this video:

With the implementation of the technology of the painting device, the completed coating will last for a long time. The low cost of work and the simplicity of their implementation make this species finishes comfortable and sought after.

Another inexpensive option for finishing the toilet is to cover the walls with polymeric materials.

They are water resistant and have a surface that is easy to clean.

The appearance of plastic panels is quite attractive.

When buying and installing, you must be guided by the following recommendations:

When buying panels for a toilet, it is necessary to choose structures with a thickness of 8 mm, which have the necessary strength and are able to maintain their qualities under mechanical stress.
Pre-arranged before installation wooden frame, along which we finish the surface with polymer panels.
When necessary, monitor their verticality.
Polymer panels have antiseptic properties that prevent the formation of mold and mildew. For more information on how to finish the walls with plastic, see this video:

Despite their strength, the panels are quite fragile and require proper handling.

If the walls of the toilet are even, then plastic panels can be glued directly onto them without a frame.

This material retains its properties throughout the entire period of operation, regardless of changes in temperature and humidity in the room.

Other options for finishing the walls of the toilet

A natural stone can be combined with other coatings

When there is an urgent need to create a toilet unique interior, you can finish the walls from natural or artificial stone using various options decorative plaster, using curtains and soft panels, or apply a combination of several considered compositions.

Of course, these options are not considered in small bathrooms, but in large toilet rooms, which are part of spacious cottages and country houses.

The toilet is no less frequently visited place than, for example, the kitchen. In this regard, many people are trying to make repairs as aesthetically pleasing and beautiful as possible with the help of plastic paneling. You can sheathe the walls with your own hands, without using the help of a specialist, where the end result will be no worse than if the work was carried out by a team of craftsmen.

Advantages of plastic panels and material selection

The first step is to choose plastic panels, appearance which today can be evaluated on the Internet, having previously read the photographs of the products. In addition, modern stores are full of a variety of decorative PVC. When choosing products for finishing the toilet, pay special attention to the composition. quality material must contain carbon, hydrogen and chlorine, the latter being mandatory 46% ethylene and 57% combined chlorine. In addition, lead must be used in the production of plastic panels. This composition contributes to finishing material will allocate much less harmful substances in case of fire, in addition, it is worth noting that modern plastic in the solid state almost does not burn.

Toilet finishing PVC panels allows the walls to withstand high humidity, as well as easily transfer various loads. In addition, this material has excellent heat resistance and insulation. And the main advantage of a plastic toilet is, of course, the cheapness of finishing work, when compared with the rest. In addition, PVC allows you to hide all the existing bumps on the walls in the toilet.

An important advantage is that when finishing the toilet with plastic panels, you do not have to spend time, effort and money on leveling surfaces. In addition, your head will not be occupied with thoughts regarding sounds that can be heard from the room, because PVC is distinguished by excellent sound insulation.

Another advantage of such panels is that with the help of them you can successfully hide electrical wiring in the toilet without fear that a fire will occur due to water ingress. If you purchase plastic products for decoration, the thickness of which is 10 millimeters, then they can be safely used for sheathing not only the toilet, but also the kitchen and bathroom, as they will be an excellent replacement for expensive tile flooring. In addition, PVC is great not only for finishing the toilet, but also for other places that are characterized by high humidity. As a rule, such places are sheathed with white plastic panels, but you can choose from laminated PVC, which can give the interior a beautiful look.

It is worth remembering that the main criterion in the process of choosing the material for finishing the toilet is the final view on the wall of the room. Yes, and it is best to make a purchase through specialized stores than in the market. In addition, in stores they will be located directly on the walls, which will better represent the finished look of the toilet after finishing. In addition, in stores, the likelihood of coming across a fake is much less, since they carefully monitor the quality of incoming products.

When purchasing plastic panels for finishing the toilet, carefully inspect the paint. The layer of coloring material should be uniform, not contain black dots on the surface. All plastic panels should not have waves with differences, they should have the same dimensions. Otherwise, during the repair of the toilet, difficulties may arise during the installation of products. At the same time, irregularities in length are permissible, since the plastic panels will straighten when fastened.

Finishing

Before proceeding with the lining of the toilet, it is necessary to carefully prepare the walls. This is quite simple to do: dilute a small amount of fat-free product in water, then rinse the surface of the walls. Next, wipe the walls with a dry cloth, leaving to dry completely.

Measure the toilet, namely its length, width and height. In this case, the existing protrusions, as well as window and door openings, should be taken into account. To hide passing communications, you should calculate the most optimal size.

Toilet wall decoration

Frame installation

Calculate the number of plastic panels that will be required in order to completely finish the toilet. Today, in stores, as a rule, you can see panels whose width is 0.375 and 0.25 meters. If the walls in your toilet are not particularly even, then you should buy a dry rail that will allow you to mount the frame. In addition, do not forget to purchase finishing and starting profiles, skirting boards, corners for skirting boards, as well as internal and external corners. In this case, it is best to buy everything with a small margin.

Treat the rail with a protective compound that will protect the wood from the formation of mold and fungus. As soon as the rail dries, you can begin to install the frame. Divide the rail into certain parts that will fully correspond to the horizontal dimensions of the wall. Fasten 4 slats on each side. Fasteners should be parallel to the floor surface and between themselves, while the gap between them should be approximately half a meter. In the process of installation work in the toilet, you can use dowel-nails.

Plastic finish

Decide for yourself which side is best to start finishing the frame. Adjust the corner or starting profile in size, in this case it all depends on where you are going to start finishing the toilet. Fix the profile on top of the frame, you can fasten it by using a stapler or small self-tapping screws. For a better installation, it is recommended to use a level, since the installation of subsequent products will depend on the installation of the first plastic element.

Adjust the plastic panel to the required dimensions, then insert it all the way into the starting profile. Using a stapler, attach the panel to the rails. The rest of the products should finish the toilet in the same way.

Cut the plastic panels immediately before the installation itself, having previously measured the height. It is likely that strong drops can form during the finishing of the toilet. It is best to make holes for the plumbing hatch and ventilation with a sharp knife.

Ceiling finish

Sheathing the ceiling of the toilet with plastic products differs only in the method of frame fastening. At the same time, the frame itself must be installed on direct suspensions, choosing light bars with a small cross section or a ceiling profile. This approach will allow you to most correctly place the lamps in the ceiling space, as well as control the height of the ceiling surface. At the same time, it is best to make holes for the lamps also with a sharp knife.

It is best to leave small gaps along the edges on the ceiling of the toilet, which will facilitate the installation of the ceiling plinth in the future. If your toilet has flat walls, then you can use the frameless wall finishing method. In this case, it is possible to fasten plastic panels directly on the surface of the walls.

Choose what works best for finishing: mounting glue or dowel-nails. In the case of glue, grease the first plastic panel well, and then press it firmly against the wall.

Well, in this way it is not so difficult to finish the toilet with plastic panels, and therefore you should not delay the repair. Buy materials and get to work. Good luck.

The desire of every apartment owner to equip their home with taste and comfort is quite natural, especially when it comes to such a place as a toilet. At the same time, it is quite natural to want to save on finishing. At first glance, everything is quite complicated, because at present the choice of materials for decoration is very large. But, focusing on the contents of the wallet, it is easy to divide the materials into budget and expensive ones.

Among the budget options for finishing the toilet, plastic panels are very popular, which, according to their characteristics, are ideal for decorating walls and ceilings not only in the toilet, but throughout the bathroom.

Beautiful designs can be seen in the photo. Not only that, they are also easy to attach, and also easy to dismantle in case of deformation. Therefore, to install them, you do not need to have any special knowledge and skills, but only the desire to independently make wall cladding in the toilet and bathroom.

Advantages and disadvantages of plastic panels when finishing the toilet

It should be noted that over time the quality of the sold material has become much better and more adapted to certain operating conditions. Previously, a plastic finish was chosen only when the repair in the toilet was strictly limited by the budget. But now with its help you can decorate the room and hide all the imperfections of the walls. You can verify this by looking at various photos designs. Various shades, patterns, textures and shapes will help make the interior unique and functional. But as it always happens, plastic paneling has its advantages and disadvantages.

Let's get to know them better:

Advantages

Ease of fastening.
Easy to wash and clean.
Resistant to aggressive detergents.
Sufficient strength of the material, achieved through additional stiffeners.
They have significant wear resistance.
Low cost.
The design allows you to close all communications, including pipes and wiring.
It is possible to make an additional layer for sound and heat insulation.
The vertical mounting method visually lengthens the space.

Flaws

Despite the stiffening ribs, the panel itself is thin and can crack with considerable effort.
If you are going to use plastic in a toilet or bathroom, you should pay attention to its safety for humans. Because some low quality models may contain aldehydes or other dangerous toxins.
There is a danger of slight ignition, as plastic is not very resistant to fire. Therefore, when buying, choose plastic panels with the most fire-resistant characteristics.
The area of \u200b\u200bthe toilet or bathroom is slightly reduced due to the features of the fastening of the panels.

Plastic panels are mainly used for wall cladding in the bathroom and toilet, because they have the necessary characteristics for this. However, designers do not recommend sheathing walls with plastic in residential areas.

Color palette of plastic panels

The palette of PVC panels is so diverse that it can be used to create a real cozy corner for consumers with absolutely any taste. There are a lot of photos on the network, where various color shades and their combinations are presented.

It is impossible to single out the most popular shade, because with a successful combination, they all look great.

At least take a photo where the bathroom is presented in a beige tone.

If you choose the appropriate lighting and accessories for gold, you get a stylish and harmonious design, looking at which one can only be surprised due to the fact that it is made using plastic panels.

Among the variety of photos you can find the option with PVC panels for ceramic tiles. This solution allows you to create an imitation of tiles and, accordingly, make the interior visually more expensive.

With the help of black and white colors is created stylish design, which is not inferior to the finish made of tiles. Finishing the toilet in pink, blue, light green or lilac tones can be no less harmonious and simple. It is only important that the toilet room does not seem visually smaller, and dark saturated shades can contribute to this.

Features of combining in the decoration of the toilet

When choosing plastic sheathing for walls and ceilings, you don’t have to stop at just one. Quite harmonious combinations can be formed if the walls and ceiling are sheathed with PVC panels, and ceramic tiles are laid on the floor. The tile will be able to withstand the load that is carried out on it for many years.

The rack mounting system allows you to hide wires and pipes, and also allows you to significantly decorate the design. In this way, ceilings are made out not only in small bathrooms, but also in large bathrooms. For small toilets, such a fastening system plays an additional role, allowing you to visually increase the space.

Panel mounting principles

There is no particular difficulty in fixing the panels in the restroom. It is only necessary to stock up on patience and a tool with which it will be possible to carry out the plan. The list of tools is small:

Electric drill;
Hacksaw designed for woodworking;
Hacksaw for metal work;
A screwdriver, if there is a screwdriver, then this is the best option;
Hammer;
Office for measurements and designations;
Ladder or stepladder.

The first thing to do is to measure the work surface in the room and calculate how much plastic is needed. There are 2 options for attaching plates - gluing and rack type.

If the first option is chosen, then the walls must be completely cleaned of the previous cladding. After buying plastic panels, you need to let them stand indoors so that they acquire room temperature. Do not remove the film in advance, which protects the surface from damage and scratches. In order to mount on the wall, carry out preparatory work. It is necessary to clean the surface and level it with plaster.

The second option is to mount on a crate, which looks like bars or battens screwed to the wall at some distance. There are certain standards - for mounting on the ceiling, the distance between the rails is no more than 30 cm, and on the walls - 30-40 cm. The rail profiles must be fixed perpendicular to the intended direction of the panels.

For mounting on wooden surface it is better to use self-tapping screws, and for concrete or brick walls suitable dowel-nails.

Repairing damaged panels will not work, they will only have to be thrown away. This must be taken into account when calculating the required quantity and take a few spare pieces. Fastening to the crate involves punching through the panel, so any erroneous hole will cost a beautiful and coherent design.

First, the fittings are attached - these are the corner and final elements. fasten ceiling plinths if you plan to install panels to the ceiling. After that, the panel is inserted into fastener narrow side, and on the wide side is attached to the rail.

After you make sure that the plastic part is evenly installed, fasten the next one. Maintain maximum fit. The final panel in the row is inserted between the last part and the adjoining fittings. If any part is superfluous, then it must be cut with a knife.

The ceiling mount differs from the wall mount in that you need to leave a distance of about 15 cm. spotlights. Holes for their output are pre-marked and cut out.

Practical use of plastic panels

In order for the restroom to be always clean and pleasing to the eye, it needs care. Especially carefully it must be carried out on the surface of plastic panels, because they can crack.

After some time of operation, dirt can get between the fastenings of the plates, which over time will provoke the appearance of mold. To prevent this from happening, it is necessary to regularly sanitize the surface with special disinfectants. Suitable soft detergents soap based. It is not desirable to use products based on abrasive particles. They can scratch the surface of the panels and the original appearance will be lost.

Since Moscow is quite an expensive city, the use of PVC panels is very popular among its residents. But thanks modern technologies quality and appearance have improved significantly. Therefore, saving money, you can make a stylish design both in the toilet and in the bathroom.

The decision to make repairs in the toilet and use PVC panels for cladding came spontaneously. Our latrine had to be repaired a long time ago, since the pipeline was already tired of not being closed. After studying the assortment facing materials, paneling seemed interesting idea. We put tiles on the toilet floor and the whole bathroom was transformed after the renovation.

Svetlana

I did not want to invest a lot of money in repairs, and there were no extra ones, so the wall panels turned out to be an interesting idea. Ordered in Moscow and delivery came quickly. We chose a tile imitation in beige and brown ratio. It turned out very nice, especially since all the pipes were hidden. The toilet floor was tiled, and the ceiling was also plastic.

Anton Tsugunov

Reading time: 4 minutes

Not everyone can put tiles in the bathroom on their own home master. That is why many people prefer to resort to more easy way ennoble this room - make plastic panels. The main advantage of structures of this type is the assembly according to the principle of the designer, which makes it possible to disassemble the panels easily and without loss if necessary. Design features This type of finish allows oxygen to circulate freely, which is fundamentally important in conditions of high humidity.

Benefits of choosing PVC panels

Low price, which varies depending on the quality of the material and the prestige of its manufacturer, but generally remains affordable.
If the installation work is not carried out independently, then you will have to pay much less for the services of the master than for laying ceramic tiles or, for example, natural stone.
Resistant to fluctuations in humidity. Plastic is not afraid of drops of water, temperature changes, mold, fungi. Even if the material is used in an unheated room, there will be no deformation or loss of color brightness.
Reliable manufacturers guarantee the safety of their products of all properties for a quarter of a century.
Unpretentiousness in use and care. Plastic panels are remarkably washed from dirt with a soapy solution.

Have plastic trim and a few downsides:

Installing plastic panels will still steal some toilet space, which does not happen when painting or wallpapering.
Vinyl does not burn well, but if it begins to melt, it releases acrid, toxic smoke.
Choosing a plastic finish from unscrupulous sellers, you can buy a low-quality product that will be very fragile, brittle.

On the video you can see the results of the repair in the toilet when it is finished with PVC panels:

Examples of repairing a toilet with plastic panels with your own hands are shown in the photo below.

The cost of repairing a toilet using plastic panels

If you have not decided which is better - to upgrade the bathroom yourself or order a turnkey toilet repair service, keep in mind that in Moscow such a repair with plastic paneling will cost you 11-13 thousand rubles, in St. Petersburg - 9-11 thousand rubles. In the regions, prices can vary quite significantly.

Choosing panels for finishing the toilet

PVC is an incredibly flexible material that bends at an angle of more than 90⁰. You can check the quality of the material if you take the panel from different ends with your hands and start bending it. High-quality plastic will bend into a ring.
Smell the material you buy. Your nose should not smell anything, because high-quality plastic is devoid of any odors.
Narrower panels are easier to properly level, wide ones will leave a lot of unnecessary trimmings.
All quality products have the appropriate certificates. Their absence from the seller should make you suspicious.

Advice. When buying PVC panels, always take a small stock of several elements. After all, if during the laying process it turns out that your initial calculations were wrong, it may turn out that just such a model is no longer available.

We mount plastic panels in the toilet

Sheathing a toilet with your own hands using plastic panels is not at all a difficult task if you have the desire and a supply of free time.

Before you go to the store, recalculate the area of future installation, add another 15% to the figure obtained for cuts.

Necessary materials and tools

Before you make the installation of plastic panels in the toilet, you need to stock up on useful equipment. You will need:

PVC panels, as well as edging profile for them;
aluminum or plastic profile;
hydraulic level;
self-tapping screws;
screwdriver and drill;
cutting tool;
drawing tool.

Preliminary work

Before starting the installation of plastic trim, perform the following steps:

We remove the old finish from the walls.
Change if possible old wiring and water pipes.
We process the walls with a primer mixture.
If it is planned to install cabinets, shelves, accessories in the room, we install additional strips under them.
The material must be brought into the apartment a few hours before the start of work so that its temperature equals the temperature in the room.

Installation

The sequence of work will be as follows:

We fix plastic or metal guides on the walls.
On the ceiling, the crate should be mounted perpendicular to the direction of fixing the plastic elements, and on the walls - horizontally.
We install guides in increments of 0.5 m.
Fixing profiles.
Carefully insert the first plastic panel into the U-shaped profile, fix it with self-tapping screws. Some builders use a construction stapler for fixing, but this step is only acceptable if a wooden crate is installed, which is inappropriate in toilets.