An artificial stone bath is a tribute to fashion or a recognized need. Cast marble bathtubs. Reviews. Overview of manufacturers Overview of cast marble bathtubs

Obviously, the times when only two types of bathtubs were available to consumers - steel or cast iron, have long been forgotten. They were replaced by acrylic bathtubs that quickly gained popularity. Indeed, this is a great alternative with a lot of advantages, but progress does not stand still. And relatively recently it became available more interesting view this product - baths from cast marble. One name suggests thoughts about reliability and durability. But let's see if this is actually the case. Today we'll give you standing selection tips bathtubs made of cast marble, consider their main pros and cons and highlight trusted manufacturers.

1. What are marble bathtubs made of?

Knowing the production technology and the correct composition that manufacturers must follow will help you choose a really high-quality product. So, as basics used natural marble chips. It is obtained by grinding marble slabs with defects or natural lump stone waste in the manufacture of decor items or other products. After processing, the crumb has a very fine-grained structure, reminiscent of flour.

To fasten the composition, special binders are added to it and mixed thoroughly. Usually resins are used for these purposes. And component ratio must be kept at 80% crumbs + 20% resins. A slight deviation from the norm in the range of ± 2% is allowed, which will be painlessly reflected in the characteristics of the finished product, but no more. A significant reduction in marble in the composition will lead to a deterioration in performance.

And now consider the method used by unscrupulous manufacturers, thereby deceiving customers. In this case, not natural processed stone is used as the basis, but quartz sand. This is a material that consists of small particles with internal cavities. And, as you know, the more porous the material, the lower its strength. Problems can also arise later, for example, when cutting holes for drains and overflows or cutting in a hydromassage system. Chips and small cracks may form, which will eventually spread over the entire surface of the product.

Now as regards production technologies. It consists of 5 main steps:

Form preparation or formwork. The accuracy of dimensions and the straightness of flat sections of the product will depend on the quality of the form. Also, the characteristics of the formwork affect the uniformity of the wall thickness. Therefore, worthy manufacturers use very expensive and accurate casting molds, which, accordingly, increases the cost of the bath itself. There are both standard formworks and custom-made, for a specific shape of the bowl. A very important step is application on the walls of the mold of a special mixture - gelcoat. This polymer composition, which will serve as a protective layer on the surface of the bath, make it shiny and increase wear resistance. Its use is mandatory, because the surface of the marble is very porous. If this moment was missed, then the surface of the bath will quickly absorb dirt, and will be exposed to dyes. Besides, it will not be so smooth and attractive.
The second stage is the preparation of the mixture, which we described above. We did not mention only that a coloring matter is added to it to give the desired shade. At this stage, there is also the possibility be deceived. Conscientious manufacturers add dye directly to the mixture and knead all the ingredients together. In this case, the finished product will have the same color throughout the thickness. And even the drain holes will have colored walls. This greatly simplifies the repair of the bath in the future. It is possible that slight scratches or chips may occur during careless operation, but they will have a color identical to the entire surface and will not be striking. And to eliminate them, you just need to purchase a repair kit of the appropriate shade and use it yourself. Manufacturers who are trying to reduce the cost of the manufacturing process and make the price of their product lower and more attractive do not add color to the mixture. They apply a color coating only to the surface and protect it with a layer of gelcoat, at best. In this regard, when chips or deep scratches form on a colored surface, they will have a distinctive light color and will be very visible.
After all preparatory work the finished mixture is poured into the formwork. This process requires maintaining a certain level of temperature and humidity. The normal temperature lies in the range - 18-23 ° C. Compliance with this condition is one of key points, otherwise it may happen uncontrolled deformation composition. In the factory, the pouring process is carried out on special vibrating tables. A certain level of vibration helps to distribute the mixture evenly, prevent the formation of voids and achieve the required degree of shrinkage with the given density parameters.
At the same temperature, further drying and crystallization of the composition occurs.
After the final hardening, the formwork is removed, and the surface of the bath is subject to minor modifications, namely, the removal of casting defects, grinding and polishing. Then the finished product is allowed to brew for a certain time to acquire the necessary strength indicators.

After such a seemingly simple process, marble bathtubs acquire their refined and perfect look.

2. Advantages and disadvantages

Any product has a number of positive and negative points that you need to know. After all, it is these factors that are decisive during the choice. Let's start with undeniable advantages cast marble bathtubs:

Advantages speak for themselves and justify the cost of such baths. Now let's get acquainted with shortcomings, which are much less:

Attentively having analyzed disadvantages, you can see that the real disadvantages are only the last two points. The rest are caused either by improper care or improper installation and operation, so if you decide to buy, you will get a really reliable and durable bath that will perfectly complement the interior of the room with its luxurious look.

The bath is the center of attention of the entire room, its key component, which can both favorably emphasize the features of a certain style, and spoil the atmosphere with an inappropriate shape or color. The variety of shapes of bathtubs made of cast marble is much wider than that of natural marble. Anyone can choose for themselves the necessary option. The form depends on installation method:

Standing separately;
Wall mounted.

In the first case, the bowl can be a real work of art, especially if it was made to order. This type of product is a bowl, which is located at a distance from the walls. In some cases, special legs are provided, which can have a wide variety of shapes and give a special chic. Its edges can be either straight or rounded. The edges can be asymmetrical, reminiscent of sea waves. The silhouette itself can be oval, trapezoidal, almond-shaped, round, in the form of a polyhedron or asymmetric. Such models look very unusual. It is appropriate to place them in spacious bathrooms rooms. Usually they take pride of place in the center of the room. A specially paved small pedestal and a tall outdoor faucet will effectively complement the non-standard font. disadvantage such an installation location is:

The wall-mounted installation method, due to its compactness, means placement in small bathrooms . By form bowls distinguish between the following options:

Rectangular;
Asymmetrical;
Quadrant;
Corner.

All of the above models can be equipped with a hydromassage system. The choice of a particular shape and size of the bowl will depend on the area of \u200b\u200bthe room and your personal preferences.

Concerning color solution, then two options are considered the most harmonious:

When the bathroom has a distinctive color and serves as a highlight of the room. In this case, the non-standard color of the product must be supported by several more small details. For example, a wine-colored bowl can be complemented by large candles of the same color and a large bath towel. Or a small rug and wall shelf in a similar shade. The surface does not have to be uniform. It can imitate the color of natural stone or other materials. In this case, the bowl should be in a contrasting color with respect to the colors of the walls or floor. Then you will achieve the desired effect, and all attention will be focused only on a luxurious bath.
The second option is the most traditional - when the color of the bowl matches the general color scheme bathroom. Such an interior looks harmonious and holistic. And the bathroom becomes an integral part of it. Usually the closest shade to the color of the walls is selected. And here flooring maybe a few shades darker.

Properly selected shape and color of the bowl will help create unique interior, which does not require additional decor. After all, the impeccable appearance of marble baths is already the main decoration of the room.

4. Rules for care and proper operation

Like any other product, cast marble bathtubs require careful attitude and proper care. And as you know, best care- This prevention. To maintain their attractive appearance and avoid the formation of unwanted stains, it is necessary to adhere to several simple rules:

Now for the small ones. scratches or chips. On the surface of quality products, they practically do not form if there was no impact. If the surface of your bath is quickly rubbed and covered with a grid of small scratches, this indicates an improper manufacturing process or a manufacturer saving on the quality of the protective coating. Re-polishing will help eliminate this. Special kits for minor repairs will help to eliminate small chips yourself. If the size of the chip or the depth of the scratch is large, then it is better to take the help of specialists.

5. Best manufacturers according to consumer reviews

And the most important question which manufacturer to trust And how not to waste an impressive amount. After all, it is quite easy to be deceived, we told you about this in detail in the description of the manufacturing process. Answer this question is very simple- do not be tempted to openly low price on the product and it is better to give preference well-known manufacturers that have been on the market for a long time. After analyzing a lot of consumer reviews, we can distinguish a couple domestic manufacturers that have proven themselves on the positive side:

From European manufacturers three representatives can be distinguished:

It is also worth mentioning a couple of manufacturers who using quartz sand as a base material, and their products are still called marble:

We introduced you to the most significant characteristics that affect the quality of the product, gave recommendations on maintenance and operation, and cited several trusted manufacturers whose products comply with necessary conditions. Now your choice will definitely be successful. One thing is certain - cast marble bathtubs will be appreciated by people who are accustomed to comfort and practicality.

Today's cast marble is a kind of artificial stone. Variants of this material have been known since ancient times. In the manufacture of any artificial stone, production waste is used. In our case - marble chips, ground to a fine state.

The composition of the initial mass for casting contains up to 95% of ground marble chips. It is mixed with polyester resins, i.e. with synthetic binders. Pigments and hardeners are added. The resulting creamy mass is applied to specially made molds for casting. After drying and grinding, the last technological operation takes place - gelcoat treatment, which is sometimes called liquid glass. This is a protective coating that protects the surface from the action of aggressive environments and gives the product a shine of natural stone.

Cast marble bathtub painting process

Injection molding allows the creation of products of arbitrary shapes, sizes, colors and textures.

Warning:
Some manufacturers reduce the cost and use quartz sand instead of ground stone chips. Outwardly, these bathtubs are no different. But quartz sand grains are heterogeneous and contain internal cavities. Porosity reduces the strength and durability of the bath, leads to difficulties in installing fittings in the bath bowl.

If the dye is added to the molding mass before mixing the components, the product is stained evenly to the full depth. When scratches appear on the bath bowl, they are not visible. If an unpainted mass is used during the molding of the product, and then only the surface layer of the product is stained, then scratches appear in this case.

Therefore, when choosing a bathtub made by injection molding, ask the seller who and how the bathtub was made.

Comparison of the characteristics of natural and cast marble

Natural marble is composed of the minerals dolomite and calcite with crystal structure, in which separate crystal grains are linked. Such a stone has a high density and at the same time porosity.

Cast marble bathtubs are highly durable

Cast marble is created on the basis of natural stone. From a comparison of their characteristics, the advantages of cast marble are visible. Due to the compacted microcrystalline structure and the presence of polymer resins, it has a lower density and no porosity. This leads to an increase in the strength of products cast from artificial marble.

Characteristics of natural and cast marble:

Characteristics	Natural stone	casting stone
Density	2,6 — 2,8	less than 2.4
Porosity	0,6 – 3,5	almost absent
Water absorption	0,23 – 0,4%	0,03%
Frost resistance (in cycles)	50	150
Internal transparency	present	No
Reaction with acids and hygroscopicity	When interacting with acids, it breaks down, releasing carbon dioxide, and absorbs water through micropores.	Not affected by acids and does not absorb water due to additional external coating with gelcoat.

From a comparison of the above characteristics, it becomes clear that modern man-made stone is a reliable material for creating bathtubs. It is easily processed, and if damaged, it is easy to restore.

Pros and cons: advantages of cast marble bathtubs

Bathtubs made of cast marble have significant advantages compared to products made from other materials:

Injection molding technology imitates the texture of natural stone without limiting colors and shades.
The bath is molded with the desired spatial shape and withstands increased loads: the strength of cast marble is comparable to the strength of natural granite.
These are heavy and therefore stable bathtubs. Optionally, they are installed without fasteners and legs.
Due to the low coefficient of thermal conductivity (as a result of the use of polyester resins and gelcoat), the surface of the product is warm to the touch. The bath retains heat and the water stays hot for a long time.
Polyester resins dampen the vibration that occurs when using hydromassage; thanks to the increased sound absorption coefficient, cast marble bathtubs reduce the level of water noise.
Cast marble is resistant to chemical compounds.
There are no micropores in cast marble. This provides antibacterial properties: microbes have nowhere to accumulate.
Cast marble bathtubs require the most minimal maintenance. Professionals estimate the service life of such a product at 45 years.

Pros and cons: product surface stability

Surface stability is another advantage of injection molding. If when creating such a bath technological process followed, then chemicals the surface of the product is not damaged.

A fact is known: once, to check the quality of the surface of cast marble, staining and aggressive substances were applied to the bath, which were removed after 10 hours by wiping the surface.

There are no traces of caustic and coloring substances left on the surface: vinegar and ketchup, tea and milk, beet juice and lipstick, ink, oil and dye powders. To a small extent, traces of lemon juice, acetone and liquid deodorant remained in the form of a faint spot or a whitish circle.

Cast bathtubs require careful handling and constant care.

Disadvantages of using cast marble

There are also negative aspects associated with the operation of cast marble baths:

Stone baths are more expensive than baths made from other materials.
These bathtubs are 95% natural stone and weigh a lot. This complicates transportation and installation.
Sometimes during operation, chips and scratches appear on the surface of the bowl due to increased impact loads or the use of aggressive chemicals and cleaners, including abrasives.
Rinsing of the bathtub surface is required after each wash or wash.

Methods for the restoration of stone bathtubs made by injection molding

With careful handling of such a bath, only a soap solution and a soft sponge are required to maintain cleanliness. No other funds are needed. But even with careful handling over time, traces of operation appear on the surface of cast marble: scratches, chips or individual spots.

If the bathtub is painted over to the full depth, then small scratches on the bowl can be easily removed by grinding.

Possible chips are repaired using a three-component repair kit consisting of gelcoat, hardener and accelerator. First, the cleavage site is degreased with acetone, then, according to the instructions, the putty mass is prepared and applied to the cleavage site. After 2 hours, the putty dries. The putty is cleaned with a waterproof sandpaper and sanded using grinder.

When choosing a bath, give preference to trusted manufacturers

Separate stains are eliminated by combining both methods.

If, as a result of improper installation of a stone bath, deformations of the bath bowl have occurred, do not try to fix the defect yourself. In this case, it is better to contact a professional.

Almost no one doubted that the era of the dominance of cast-iron and steel bathtubs would one day end. The only question arose about a worthy successor who would be able to pick up the falling crown of its former greatness metal baths and continue the glorious path on your own. For some time it seemed that they could become such a candidate. Indeed, they have many advantages and enjoy the well-deserved love of the consumer, but ... The fact is that another candidate claims the place of honor - this cast marble bathtubs, which, in fact, today will be discussed in our article.

Cast marble bathtubs: convenient, reliable, high quality.

Cast baths have appeared on the market relatively recently. Naturally, the same ubiquitous progress, constantly pleasing us with new and new inventions, became the reason for everything. Cast baths are made by combining marble chips and polyester resins. Natural marble is boring and monotonous. Cast bathtubs can have different colors and copy any type of stone. Naturally, such baths have both fairly objective advantages over acrylic bathtubs and obvious shortcomings. It is about them that we will now talk.

Benefits of cast marble bathtubs

They are very durable and are not inferior in strength to natural granite. The only problem is that today on the market there is a huge number of low-quality molding bathtubs made in violation of technology. It is to these products that we owe the appearance of stories about bathtubs that cracked in half or lost their original color after just a week of use. To avoid such incidents, buy bathtubs only in trusted stores and under well-known, trustworthy brands.

Marble bathtubs keep the temperature very well and do not let the water cool down. They are very "warm" to the touch, unlike natural stone. In addition, such products do a good job of maximizing effective noise absorption. Acrylic bathtubs also retain heat quite well, but still lose to cast counterparts in this regard.

Cast baths perfectly contain vibration, which is quite an obvious advantage when using hydromassage. Acrylic bathtubs are much worse in this regard, quite often they vibrate powerfully and deliver a certain amount of discomfort.

Acrylic cannot boast of such a variety of colors that are available for polymer concrete products.

Disadvantages of cast marble bathtubs

If acrylic bathtubs It is quite easy to transport and install, then with molding baths everything is much more complicated. They are very heavy and require certain skills during installation.

Acrylic bathtubs "behave" much better during operation. Firstly, acrylic practically does not change color even if the bathtub has been actively used for several decades. Secondly, chipped bathtubs are more dangerous than acrylic products.

Casting baths must be rinsed after washing, as the dye can be absorbed into the product and leave a completely unaesthetic stain.

Bathtubs made of marble chips usually cost more than acrylic ones.

Operation and repair of cast marble bathtubs

It is quite natural that care is necessary for any product, regardless of its quality. Bathtubs made of cast omarble in this case are no exception. As we have already said, today you can find 2 types of such products: natural bathrooms from reputable brands and cheap counterfeit products. It is simply pointless to say something about cheap analogues, because no matter how you follow them, disappointments are inevitable: very soon such bathtubs lose their color, and numerous scratches appear on the surface. We recommend that you double-check the manufacturer and be extremely careful when buying a bathtub.

Caring for a high-quality polymer concrete product is a simple and not too troublesome business. The main thing to remember is that, like all polymers, the bathtub coating is sensitive to abrasives. Therefore, cleaning products must have a special safe composition.
If small chips or scratches still appear on the cast marble bathtub, then you can get by with a special repair kit without dismantling the bathtub. Everything is repaired quite simply and you do not need to have special special skills. If the scratch or chips are large enough, then you will have to call a specialist. You are unlikely to cope with such a problem yourself.

At all, casting baths- an excellent solution for those who appreciate comfort and convenience. Under such baths, you can easily pick up any furniture and plumbing. In addition, cast marble baths look very solid and emphasize the "status" of its owner.

Mankind has been using baths for decades. The oldest of them - presumably made five thousand years ago - archaeologists discovered during excavations on the island of Crete. During its existence, the shape of the reservoirs has not changed. But the material from which they were made was very different.

Bathtubs were made of wood, granite and ceramics, bronze and cast iron, steel and plastic. But, more recently, the time has come for products made of artificial stone. These are stone baths or cast baths.

Bathtub made of artificial stone - technology for the manufacture of molded products

As a filler or base component in this material, stone chips are used. Often these are products of processing marble or serpentine, granite or jasper, onyx or malachite, as well as quartz sand. As a binder, manufacturers use acrylic or polyester resins, and catalysts specially designed for this purpose are added to accelerate the solidification of the liquid mass. The proportions of the ingredients, as well as the manufacturing technology of molding bathtubs, are selected depending on the specifics of each manufacturer.

Such products made of stone mass are not installed on the usual supports. Included with them are special mortise legs.

The process of casting a bathtub from an artificial liquid stone, as a rule, includes the following steps:

Surface polishing inside the matrix and gelcoat coating for mechanical protection. A thin, even layer of this gel-like dyed resin component highlights the originality of the piece.
Obtaining a liquid mass from stone chips, an adhesive, dyes and a catalyst.
Pouring the composite into the mold after the gelcoat hardens and connecting the vibropress. To create an imitation of a particular breed of natural stone, the mass is stirred in a special way, sequentially adding coloring matter - pigments to the composition.
Removing the finished product from the mold after a set period of time.

Pros and cons of an artificial stone bath

Let's look at the recognized advantages and obvious disadvantages of an artificial stone bath. Products made by casting are diverse, since the production method allows the production of models of various shapes, sizes and colors. These are corner and wall baths, round and rectangular, with an original pattern or snow-white.

The equipment is provided with hydromassage systems, orthopedic headrests, devices for the legs and back. Baths made of stone mass are distinguished by their advantages, which have already been appreciated by discerning consumers.

Pros:

Attractive design. Appearance products are similar to natural stone models - expensive and elegant, but the surface is exceptionally smooth and warm, which is not characteristic of natural material.
Exceptional thermal insulation properties. Due to the relatively thick walls (12-20 mm) and the fact that the stone mass is an excellent heat insulator, comfortable temperature water in such a bath is maintained for hours.
Ease of care. Artificial stone is a heavy-duty material that is resistant to all kinds of detergents and cleaners. Small chips and scratches on such a surface are easily polished. A layer of stone mass or gelcoat is applied to the places of thorough damage, and polishing is carried out.
Antibacterial properties. The surface of artificial stone bathtubs is so polished and dense that even microscopic cracks and pores are absent. This structure does not allow the growth of bacteria and other harmful microorganisms.
Reliable soundproofing. When filled with water due to the composition of the material of the product, there is no vibration and noise.
Strength and resistance to mechanical stress. Specifications artificial stone is not inferior to natural, therefore, products made from it are heavy-duty and do not receive damage after impacts when heavy objects are accidentally dropped.
Health safety. Baths made of liquid stone mass do not emit substances harmful to humans and, unlike models made of natural material are not radioactive.

Artificial stone products are also not perfect. But the important thing is that they have much fewer weak points than those made from other materials.

Minuses:

Significant weight. Only natural stone bathtubs are heavier than stone mass bathtubs. Installation will require a lot of physical effort and professional skills.
The high cost of the product and accessories to it. Unfortunately, not everyone can buy such plumbing.
Risk of staining on the surface when in contact with dyes, such as hair dye. Therefore, you should avoid such situations or immediately rinse the bath.
Do not use abrasive cleaners. If a product made of stone mass is covered with a light protective layer of 1-1.5 mm, the use of these substances will lead to its thinning. However, casting bathtubs from recognized manufacturers do not have such a coating, since an expensive technology for grinding the surface of artificial stone is used in the manufacturing process.

Of course, the advantages of a stone mass bath are greater than the disadvantages. If, however, this sanitary ware is handled with care, ensure proper care and operation, in time to eliminate even subtle surface damage, then the service life will be long and practically without changes in the original appearance.

Buying an artificial stone bath is easy. In specialized stores, collections of sanitary ware, which include these products, are constantly on display.

But a potential buyer should definitely pay attention to the fact that retail chains contain both respected brands and inexpensive products of dubious quality, produced without observing the necessary technology.

It is clear that such baths will not please the owners with the desired service life. This is what visitors of forums and social networks tell about them. nets, as about cracked, non-removable stains or products that have lost their original color.

when tapping the walls of a high-quality bath, the sound seems deaf and the same in every place of touch;
the product does not contain seams along the edges of the pattern;
the thickness of the walls at the bath corresponds to 12-20 mm, and the protective coating on them is not less than 1 mm;
the surface of the product is warm to the touch, smooth and shiny, without defects - scratches, roughness, chips;
the color of the color models is uniform and uniform;
a list of related accessories and instructions describing the required technical characteristics are attached to the bathroom;
the manufacturer provides a guarantee for the product;
good quality casting bath is expensive.

The most worthy among the manufacturers of molding bathtubs:
- Marmorin and Kerasan in Italy;
- Vispool in Latvia;
- Marmite - joint production of Sweden and Poland;
- Riho in the Czech Republic;
- Marmorin in Poland, etc.

Bathtubs made of artificial stone of Russian enterprises are prestigious and popular with buyers:
- Astra-Form LLC;
- ESSE LLC;
- LLC "Estet".

Bathtubs from the stone mass of these manufacturers are not cheap, but the high cost is justified by the exceptional quality. Prices are formed depending on the size, model, availability of additional accessories. As a rule, manufacturers provide a service for making a bathtub, taking into account the wishes of the consumer. Of course, the ordered model will be more expensive than the one presented on the trading floor.

It is clear that the buyers themselves make the decision in the difficult choice of the main and obligatory plumbing item in the house. But spectacular modern baths made of artificial stone do not go unnoticed.

Photo gallery of bathtubs made of artificial stone

To begin with, a small educational program - what are cast marble baths made of?

The basis for the production is marble chips (waste in the manufacture of products from natural lump marble or marble slabs with a flaw). All this is ground to a state of flour. Then the marble chips are mixed with a binder (usually resins). The finished mass is mixed and poured into ready-made forms (frameworks). Often at the same time, various dyes are added to give a certain color (we will recall about color baths a little later). Then, cast marble baths are molded and processed with a milling cutter (grinded). Next - drying and gelcoat treatment. Gelcoat is essentially a varnish, a protective coating against an aggressive environment. In addition, it adds shine to the product.

And now a little truth about the manufacturers of artificial marble baths.

The first place where you can be misled is to sell a marble bath, where quartz filler (simply speaking, quartz sand) will be used instead of natural marble chips. Quartz filler is a material with internal hollow microspheres. Accordingly, the quality of the bath from such raw materials leaves much to be desired. The more porous the material, the lower the strength of the product, and there may also be problems with tapping mixers and tapping the hydromassage system. When drilling holes, cracks and chips will appear.

The second question will interest those who want to buy a colored bath. A conscientious manufacturer adds paint and coloring pigments to the mass before casting. As a result, the bathtub will be painted uniformly over the entire depth (wall thickness) of the product. This is important because if scratches or small chips appear during operation, then in this case the whole product will still be monotonous and only gelcoat polishing will be needed to repair the bathtub. Manufacturers who save money and simply paint the finished product in the color of your choice are getting products that will show the white base of the tub at the slightest scratch. To eliminate such defects is an expensive pleasure.

Synonymous for cast marble baths: baths made of artificial stone, baths made of artificial marble, baths made of marble chips.

Now let's look at manufacturers - the pros and cons of their products.

There are three main domestic producers on the Russian market.

OOO Estet Kostroma

Pros: products made of natural marble chips (moreover, domestic marble of excellent quality), high density of the material, end and side panels for bathrooms are also made of cast marble, prices for products are on average 25% lower than market prices due to the use of domestic raw materials. Delivery of products to the customer within 2 days. The company also offers cast marble shower trays. Hit of the company - from cast marble.
Minuses: limited the lineup.

LLC Esse g Tyumen baths ESSE

Pros: bathtubs made of good quality natural marble chips, a large range of bathtubs and trays made of cast marble. good prices. Individual production of bathtubs by the customer's sizes. Hit of the company - deep shower tray RD - 90
Minuses: Production is delivered under the order, delivery of 10-14 days.

OOO Astra-Form

The main disadvantage is that bathtubs are made of quartz sand (there is no talk about marble at all). Homogeneity and density are not achieved, the number of air particles in the product increases. This, in turn, affects the strength and durability of the product.
Pros: a large range of products, always the presence of products in stock in Moscow.

Bathtubs of foreign manufacturers

Company SPN (Latvia)

Pros: bathtubs made of natural marble chips, a large range, always in stock in Moscow. SPN is the only company that produces colored bathtubs that imitate natural stone. Also in the product line - baths made of molded onyx. Piece exclusive products. Hit - bathtub Santa made of cast marble.
Minuses: side panels for plastic bathtubs.

Company Belux Ltd Belarus, Zhodino

Pros: products from natural marble chips, a wide range of models, an inexpensive price tag.
Minus: All items are custom-made, delivery time 2 weeks.

Company Marmite Poland

Pros: modern European design, products in stock in Moscow
Minus: raw materials for production - quartz sand, a large price tag.

Company Vispool Latvia

Pros: bathtubs made of natural marble chips, a wide range of models, modern design, many baths "freestanding". The same model range is produced by ESSE Tyumen
Minuses: delivery under the order 2-3 weeks, only imitation of granite bathtubs (external painting), the highest price tag on the Russian market.

Happy choice!