A greasy stain from a wooden door. How and how to wash metal and wooden doors after repair. Methods for cleaning doors made of various materials

Doors collect the same dust and dirt as walls. So, you can clean and wash them the same way. But only a few doors have a surface as even as that of the walls.

To remove surface dirt, wipe the door with a dry towel. Then wrap the broom with an old soft towel and walk it around the corners and crevices where dust accumulates. Clean intricate relief decorations with a soft toothbrush.

Wash the door after cleaning it of dust and dirt. If it is wood and stained, use wood oil soap mixed with water as directed on the package. A couple of home remedies will help clean the painted door.

Mix 4 liters of warm water, 1/2 cup of ammonia, 1/4 cup of colorless vinegar and 1/4 cup of washing soda.
Dilute 1/2 cup of ammonia and 1 teaspoon of mild dishwashing liquid in 4 liters of warm water.

Moisten a natural sponge with the solution to make it completely soft. Then squeeze it out better. Wash the door from the bottom up, thereby avoiding traces of streaks. Ruby small areas in circular motions. Rinse the sponge frequently and thoroughly to avoid smearing the dirt. If the solution remains clean, it is not necessary to wash the door with water.

It is not necessary to remove the door accessories to clean them. Arm yourself with plastic wrap instead of a screwdriver. Secure it with duct tape around the part you are about to clean. If it's metal (like a pen), get a metal cleaner like Buggy Metal Cleaner, which cleans all types of metal, including brass. If the accessories are glass or ceramic, plastic film not required. Wipe them with a rag soaked in alcohol, which will not damage your already clean door.

And a little more open...

For each type of door, individual approach in care and products intended only for certain types of doors, since the use of products that are not intended for care, for example, behind varnished doors, can damage the varnish itself and their surface.

Interroom wooden doors without a varnish coating, they need the most delicate care - at the beginning of cleaning such a door, you must first remove the dust, and only after that the cleaning itself should be done. Means for cleaning the door can be both specialized and so-called " folk remedies» - mortar tap water with alcohol, approximately in the ratio of water - 90%, alcohol - 10%. After cleaning with such a solution, remove the remaining liquid with a dry cloth. For varnished wooden doors, after such a cleaning procedure, you need to apply a polish or other special agent. The application of such products is necessary, since the varnish coating can become covered with cracks, and the polishing agent fills them, preventing the wood from drying out and the formation of even larger cracks.

From the history of doors.

The progenitors of the first wooden doors for buildings are sycamore or German maple doors used in Ancient Egypt(3000 BC) and Ancient Persia (1000 BC). In Italy, the most ancient arched door is, perhaps, the Etruscan door in Volterra (4th century BC). Over the long years of its existence, the door has acquired a number of fundamental characteristics, such as an architrave (from the Greek archi - senior, main and lat. trabs - a beam), a door jamb, a threshold, a door panel, a door - a book, etc. The architrave and jamb have been transformed in today's door frame, the threshold has remained virtually unchanged, and the ancient doors on pins - "turntables" have been modified into technologically improved doors on hinges. However, the "pin, rod", as a structural element that ensures the movement of the door leaf, remained unchanged.

As for the material that served as raw material for doors, iron and bronze gradually lost ground to wood. As far as the works of outstanding sculptors and architects that have survived to this day allow us to judge, wooden doors were already diverse in design and decoration. Walnut and oak, famous for their durability, were and remain the most used wood materials, while more valuable woods: maple, rosewood, pear, teak, ash, cherry and others were temporary favorites in different centuries.

After repair, dried spots of whitewash and lime often remain visible on the iron sheet. You can get rid of dirt with sandpaper. It is not recommended to clean metal vinyl-leather doors in this way: hard sandpaper will ruin the elastic artificial leather.

An effective recipe for removing whitewash stains is to apply vinegar dissolved in water to the stains. In some cases, wash metal door from stains, you can use kerosene diluted with water. Having treated the door with kerosene, you should be prepared for the appearance of a sharp chemical smell. Finally, it will fade in 15-20 hours. Cleaning the door with kerosene is only suitable for metal structures that are used outdoors.

Tip: in stores household chemicals you can purchase a special cleaning concentrate without a pronounced chemical smell (for example, Probel). The substance, diluted in a certain proportion with water, effectively removes lime stains and whitewash from the door leaf.

Cleaning the door leaf from other types of pollution

Getting rid of traces of adhesive tape and paint stains from the door is easy. It is convenient to erase prints of masking tape from a steel surface with a cloth previously moistened with hot water. Old adhesive tape residues can be treated with acetone-containing liquids or alcohol-based solvents.

Universal white spirit will clean the canvas from paint stains.

For the safe transportation of metal structures, manufacturers often use a protective film. Sometimes it firmly dries to the door surface. How to remove the film from a metal door quickly? Professionals recommend using a plastic spatula and solvent No. 650.

The choice of door cleaner usually depends on the specifics finishing material. Entrance doors solid wood or veneer are treated with polishing and cleaning products designed to care for furniture. Dirt from powder coated doors can be easily removed with acetone (thinner). For doors with any type of finish, do not use products containing abrasive particles. It is not recommended to remove stains from doors with sponges or scrapers, the surface of which is made of metal or plastic material.

MDF panels, from which modern interior and entrance doors are usually made, are often contaminated with greasy stains. To maintain the ethics and beauty of such doors, many hostesses have to use various improvised means to remove such stains. Moreover, depending on the type of surface coating, use the appropriate cleaning agents. In the presented review, we will take a closer look at how to remove greasy spots from mdf doors, saving natural look without damaging the surface layer.

Basically, the localization of greasy spots falls on the area of location door handle, since it is to her that we most often touch with our hands. As is known from the course of biology, the skin of our hands tends to allocate sweat-fat segments. When it comes into contact with the surface of the door, those same transparent sweat-and-fat marks remain on it, on which many particles of dust settle over time, and they turn into real dirty spots. Especially often young hostesses with small children and pets face such a problem.

But it is also worth noting that greasy spots on the surface interior doors appear as a result of contact with a variety of biological or chemical liquid substances with a certain percentage of fat content.

Safe Methods for Cleaning Grease Stains from MDF Doors

Every woman strives to 100% maintain the perfect cleanliness and external beauty of all surfaces in the house, therefore, in order to most effectively remove traces of fat from a wooden surface, it is recommended to first accurately determine the type of coating. Then proceed to the selection of the most effective means for cleaning.

Tip: before you start cleaning the door from various contaminants, it is recommended to test the interaction of the door with the selected cleaning agent in an inconspicuous area. If no reaction occurs during the test application of the cleaner, use the selected ingredient to clean the main area of contamination.

Also remember that it is not recommended to remove stubborn dirt by using the following substances:

pure alcohol;
undiluted acetone;
all kinds of solvents;
with the help of acids.

Moreover, the use of special metal and hard sponges to remove dirt is also strictly prohibited, since the use of the listed equipment will not only remove the greasy stain, but also the protective surface layer, leaving the solid wood layer unprotected. As a result of such cleaning, you will either have to completely repaint the entire door, or even change it altogether.

Let's take a closer look at how to remove a greasy stain from MDF with a laminated, veneered and painted surface layer.

Cleaning Laminate Doors

First of all, let's look at how to wash laminated MDF panels. First of all, it is worth noting that such doors have a special protective coating in the form of the thinnest film, thanks to which it is much easier to care for them:

To effectively remove greasy marks from the laminate, you should first prepare an alcohol solution by mixing pure alcohol with water in a ratio of 1: 9, where 9 parts are water and 1 part is alcohol. Next, you need to moisten a small piece of cloth or a napkin in the prepared mixture and, having applied it to the area of contamination, try to fix it for 5-6 minutes, after which wipe the treated area with a clean, dry towel.

It is important to remember that laminated surfaces should not be cleaned using abrasive products, various alkalis and acids.

You can wash grease stains from a laminated surface with 72% laundry soap. But first, prepare a strong soapy solution from it. To clean the door, you should first quickly wipe all affected areas with soapy water using a foam sponge or melamine cloth, then wash off all soap stains from the treated areas with clean water and wipe the entire surface of the door dry with a paper towel. Perform procedures using soapy water and clean water very quickly so that the door does not have time to absorb a large amount of liquid and swell.
You can remove a greasy stain from a laminate with a special pencil, which can be purchased at any store with household chemicals.
And also on the shelves of modern supermarkets and household stores there is a huge selection of pasty chemicals, designed specifically to remove greasy marks and other types of stubborn stains.

Cleaning the veneered surface of MDF doors

If you have installed new MDF doors with a veneered surface, then in order to prevent the appearance of various abrasions, sweat marks from hands and other stains on it, it is recommended to cover them with polish immediately after installation.

But if such a nuisance happened, and nevertheless greasy traces appeared, then we will take a closer look at how to remove these contaminants in order to preserve the original appearance of the veneered coating.

Our ancestors also used one unique way removing various contaminants from any surface is the use of a potato cut in half. To do this, you will need the following additional ingredients:

the potato itself, cut in half;
a small amount of baby powder (or body powder)
clean cloth or napkins.

Before removing a greasy trace from a veneered surface, you should:

Depending on the amount of dirt on the surface of the door, take one or two halves of a cut potato and place them on the marks themselves with a small effort, carefully rub the entire area of contamination until potato juice appears.
The whole thing should be left in this form for 10-12 minutes, until all the juice is completely dry.
After thorough drying, white starch should remain on the surface of the door, which should be removed with a clean, dry cloth or napkins.
If, after removing the starch, white marks remain on the veneer, then taking a clean towel or napkin, apply a small amount of baby powder on it and carefully wipe the remaining stains.

Tip: after the cleaning procedure, the veneer should be carefully polished with a thin layer.

Cleaning the painted surface of MDF

Almost all painted wooden surfaces have another unique property - a lacquer coating that provides additional protection to the paint and gives a beautiful shine. Therefore, in the process of caring for such a door, it is not recommended to use abrasive cleaners that can break the protective layer, lead to tarnishing of the treated area and the disappearance of the previous shine. Let's take a closer look at how to wash painted doors in order to preserve all the beauty of their appearance:

The first thing recommended is a baking soda solution, which should be prepared with equal proportions of baking soda and mouthwash. In the prepared mixture, moisten a clean cloth and treat all places with dirt, then wipe everything dry with a clean towel.
It is also possible to clean the painted door with a strong soap solution prepared on the basis of liquid 72% soap, after which the entire treated surface of the door should be thoroughly rinsed with clean water and wiped dry with a towel.

How can interior doors with a polished surface be washed from greasy stains?

Now consider how to clean a wooden door with a polished surface from grease stains. To do this, it is recommended to use body powder or baby powder. After applying one of the products to a clean napkin, all contaminated areas of the door surface should be treated and left for 20-25 minutes. After the time has elapsed, the remnants of talc or powder should be removed using a white sheet of paper or a napkin.

How to clean grease stains from MDF and chipboard panels?

There are four ways to remove grease stains from chipboard, MDF and chipboard surfaces:

Solvent use: Soak a foam sponge in this product, gently rub this substance into the grease stains for 4-5 minutes. After that, the treated area should be thoroughly wiped with a dry towel.
The use of a natural remedy in the form citric acid, which in the amount of two tablespoons should be diluted in 200 ml of water and, using a cotton pad, wash the affected areas of the door surface for 3-4 minutes.
Application of baking soda: dilute 3 tablespoons this tool in a glass of water and a cloth moistened with the resulting mixture, remove all contaminants, and then wipe dry all treated areas.
Application detergent: dilute 3 tablespoons of dishwashing detergent in half a glass of water and lather thoroughly. Then apply the resulting foam on greasy spots, and leave it all for 4-5 minutes. Then rinse the panel with a cloth with clean water and dry with a dry towel.

And how to clean doors made of PVC panels, see the following video:

Dear visitor! If you know other methods for removing stains, please leave your experience in the comments.

Only with proper and systematic care will your doors be able to retain their original appearance for as long as possible. appearance. Of course, like any other furniture, and especially products from natural wood, the doors need careful treatment.

How can you clean wooden doors?

No matter how often you clean the house, no matter how clean you have, these interior doors still get dirty over time. A greasy coating appears on them, since there are always a lot of impurities in the air, dust settles. In any case, you see that it's time to wash the doors. What is the best way to do this?

Of course, there are many special cleaning products in stores, but you can probably do without them. At least it's worth trying. So, you will need ordinary clean water, if this is not enough, then make a weak soapy solution, or add alcohol to the water. Before wiping the door, the rag must be wrung out well.

If just water does not help you, then take a soapy solution. It does a great job with light dirt. If the stains are already quite noticeable on the door, then turn to the alcohol solution. This recommendation will be especially useful to those who have chosen such a solution, i.e. put doors in their house white color. Indeed, on such doors, any pollution will immediately be evident.

It must be remembered that in both the first and second cases, you initially take a soft rag, moisten it in a washing solution, wring it out, wash the door with it, and then carefully wipe it with a dry rag. The door should not sour and get wet. Do not wash the door with washing powder, as well as with any abrasive products. If the method described above did not help you, then it is better to purchase a beeswax polish in the store and clean the door with it. This tool works great for both lacquered and unvarnished wooden doors, while all the dirt simply dissolves and the surface is not damaged. But that's not all, such a polish is able to remove small scratches on a wooden surface. It creates a protective film on the surface, which in turn protects the wood from dust, grease, drying out, but also significantly improves the appearance and shine of the door. Yes, the polish is not the cheapest tool, but nevertheless it will last you for a long time, and in terms of quality it is worth it.

Even if your door is outwardly clean and without damage, you still need to clean it at least once a year. This will help keep the door new for many, many more years, and it will bring joy and comfort to you. After all, the door is the same part of the interior, which affects the whole mood in the house, the whole appearance, and is largely able to show the character of the owners.

Keywords: How to clean a wooden door, Basic cleaning methods, How to clean wooden doors, interior doors, how to clean, alcohol, water, polish, soap solution, white doors, white doors, color

The door performs not only a protective, but also an aesthetic function. And repair is a “natural phenomenon” within the framework of one apartment, which leaves its mark on the entrance and interior doors. As a result, the door leaf becomes covered with greasy spots, stains, and fades.

To wash the doors after repair, you need to try hard. The choice of cleaner depends on the material of the door leaf and the degree of contamination. In addition to special compositions for washing, improvised means are used that can be found in any home.

Cleaning of iron surfaces

Many people are looking for an answer to the question of when to install doors - before or after repair? Experts recommend installing front door after work to minimize the degree of contamination. Although for this the canvas can be covered with a plastic film. So, in any case, the decision is yours.

After you have installed the front door, it remains polyurethane foam. The fresh mass can be removed with a spatula, and the residues can be washed off with a solvent (white alcohol, acetone, Profit), a special polish for polyvinyl chloride (Top Clean, Phenozol, etc.).

In addition, a hardened foam cleaner is used for this purpose.

If the foam is dry, then it is carefully cut off from the surface or removed by grinding. Then the metal door in the contaminated area is washed with any of the above solvents.

Cleaning plastic and wood surfaces

Plastic and wooden doors have a similar texture, the former are often laminated, and the latter are painted. For this reason, interior doors are not recommended to be cleaned with abrasive powders that scratch their surface. The following products are used to wash them:

Aqueous ammonia solution. Add to 500 ml of warm water 2 tbsp. spoons of ammonia This solution is used to eliminate greasy stains. A solution is also used to wash wooden painted canvases. ammonia, but less concentrated (2 teaspoons of ammonia / 1 liter of water). If strong pollution is present, then the concentration of the solution increases (2 teaspoons / 200 ml of water).
Detergents, for example, Domestos, Profit, Shumanit.
Solvents (white alcohol, acetone) to remove stubborn stains. Aggressive substances must not be used on painted surfaces.
Baking soda. To clean iron surfaces, a soda solution is used, in which a rag is moistened and the contaminated area is wiped. This method is not suitable for washing laminated products.
Ammonia-based glass cleaner is used to remove fingerprints. This product is suitable for washing plastic and wooden cloths.

All of these tools will help clean the door after repair from pollution of varying degrees of complexity. The main rag soaked in the liquid should be kept on the surface for no longer than 5 minutes, then the treated area is wiped with a clean, damp cloth.

Removing grease stains from doors

Grease stains are classified as difficult to remove, and therefore special tools are used to eliminate them.

To clean the iron product, white spirit is used. It's aggressive but effective remedy with a neutral smell quickly removes greasy stains.

To clean wooden doors, use the following tools:

Potato. The raw vegetable is cut in half, the stain is rubbed, and after 15 minutes the traces are removed with a damp sponge. Potatoes are used to clean polished surfaces.
Talc. Sprinkle a damp washcloth with powder, wipe the contaminated areas until the stain disappears. Then wipe the door with a clean dry cloth.
Vinegar. To clean a stained door leaf, soak a cotton swab or soft cloth liberally with vinegar and rub the stain. When all moisture is absorbed into the surface, wipe it with a clean cloth.
Soapy water. To remove fresh traces of grease, add soap shavings to warm water, and then wipe the surface. After that, walk with a damp, clean cloth over the treated area.
Clay with vinegar. Mix the ingredients until a homogeneous slurry is formed, apply the mixture on an oily trail, let dry. Then the remnants of the product are washed off with a damp clean cloth.

Laminated doors are cleaned with alcohol solutions. To do this, water is mixed with alcohol in a ratio of 9: 1. A cotton swab dipped in liquid is applied to the stain and left for 5 minutes.

Then the surface is wiped with a clean dry cloth. To clean laminated doors, it is forbidden to use abrasive particles, aggressive solvents, which include acids and alkalis.

Beautiful glass products are the hardest to clean from greasy stains. This can be done with an aqueous solution of ammonia. To eliminate contamination, mix ammonia with water in a ratio of 1:10, soak a cloth in liquid, rub the contaminated area.

Eliminate traces of fat will help baking soda, which is applied to a damp cloth and wipe the soiled surface. For this purpose, special cleaners based on ammonia are often used.

Other pollution

To wash iron or wooden surface from whitewash use warm water and a soft cloth. The product is wiped with a damp cloth until the stains disappear. It is important to change the water as often as possible. From glass white coating removed with a special spray.

Solvents will help remove paint from the door. Stains from the pressed MDF panel will help to remove alcohol, for this the cotton wool is moistened in liquid, applied to the dirt, left for 15 minutes. Then the paint is wiped off with a rag or gently scraped off with a blade.

The glass matte surface has a porous structure into which paint is clogged. Solvents are used to clean sandblasted glass, and the paint is scraped off from a glossy surface with a special blade. Wash off fresh water emulsion with water and a clean cloth.

Remove fresh primer from the door leaf with a damp sponge. For frozen pieces, use a solution of vinegar, glass and tile cleaner, ammonia.

Thus, it is not difficult to clean the doors after repair, the main thing is to choose a cleaner depending on the surface material and type of pollution. To protect the door leaf from stains of various kinds, cover it with a piece of polyethylene or a thick cloth during repair work.