How to descale an electric kettle at home. We clean the kettle from scale with available means. Laundry soap or toothpaste

In most localities tap water contains many impurities, especially calcium and magnesium salts. During boiling, they form an insoluble precipitate. Therefore, an unpleasant coating often forms inside the kettle - scale. These salts pass into an insoluble form and are deposited on its bottom, walls and heating elements. Due to scale, the taste of water deteriorates, its small pieces get into tea and spoil it. appearance and our health. For an electrical appliance, it is even more harmful, because it boils longer and breaks faster. Most housewives know citric acid, but there are several other ways.

What are cleaning methods based on?

It is very unpleasant when yellowish scale flakes get into the cup when you add water from the kettle to your cup. Moreover, it is formed even if you use filtered water, because filtration does not purify it from calcium and magnesium salts. Over time, their insoluble forms corrode the enamel or plastic of the teapot walls. Due to scale, its boiling time is greatly increased. Therefore, you need to deal with it regularly: it will be easier to remove it than a thick layer.

All methods for cleaning the kettle are based on the fact that scale is a deposit of salts. Acids are used to remove them. They react with salts and convert them into a soluble form. Many people know how to descale a kettle. This method is based on this very property. chemical substances. Descaling products are now sold, some use them because it is easier. Pour the product from the bag into the water and boil. You can descale in this way at a time. But many do not like that traces of chemicals may remain on the walls, so they prefer to use folk methods.

How to descale a kettle with citric acid

This is the most common and well-known way to keep your heater in good condition. You just need to pop out the bag. citric acid into the kettle and boil water for 5-10 minutes. Then leave this solution for half an hour. Many people leave the kettle with citric acid overnight if the scale layer is very thick.

How to properly dilute this remedy? For a regular two-liter kettle, take 1-2 sachets of acid (or 2 tablespoons with a slide). You can also use lemon juice, squeezing it out of 1-2 fruits. After the boiled solution has cooled, the water must be drained, but not into the sink, as it can become clogged with scale flakes. Remaining plaque can be easily cleaned with a sponge. If the sediment is very thick, the procedure must be repeated.

Cleaning the kettle with citric acid is a very easy and cheap way. So easily you can even clean the electric kettle from scale. But not everyone uses this method, because a concentrated acid solution can be dangerous for the metal, causing it to corrode. There are several other simple and safe methods.

The way of our grandmothers

Since ancient times, women have been cleaning dishes with baking soda. It was also used to clean the kettle from scale. Soda not only mechanically gently removes plaque, but also softens the sediment. Along with citric acid, this is one of the safest ways. After all, even if you don’t rinse your kettle well and the rest of the product gets into your tea, it’s unpleasant, but it won’t harm you. Often these two tools are used together. So the old thick sediment is more effectively removed.

How to clean the kettle from scale with soda? Dissolve a couple of tablespoons in water and boil for half an hour. After the kettle has cooled down, boil it again. After draining the water, you will see that the scale has become loose. If it is not possible to remove it with a sponge, then you can still boil water with citric acid, so the most difficult deposits are removed.

Other folk methods of dealing with scale

1. Boil potato peels, apple peel or cut lemon in a kettle for an hour.
2. Instead of water, pour brine from cucumbers or tomatoes into the dishes and boil for at least an hour.
3. Boil the following solution in a kettle for an hour and a half: two glasses of water, three glasses of crushed chalk and a glass of ammonia and laundry soap.

How to clean a kettle with acid

But most often, modern housewives use acids to remove salt deposits. After all, all folk remedies are not suitable for electric kettles.

Such solutions boil for a long time, and it will constantly turn off. Therefore, it is best to pour two-thirds of the water for this, adding table vinegar to the top. This solution must be brought to a boil and cooled. The scale should dissolve without a trace, but if pieces of it remain, the procedure can be repeated.

Recently, many housewives use Coca-Cola or Fanta instead of vinegar. These drinks also contain acid, which dissolves the sediment. The peculiarity of this method is that you need to pour only half the kettle, and before that, completely remove the gases from the drink. In addition, when boiling, traces of dyes may remain on the walls of the dishes, so it is better to take a colorless soda, such as Sprite.

How to properly clean the kettle from scale

1. After using any method, the dishes must be thoroughly rinsed so that no traces of the solution remain on the walls. It would be nice to boil clean water in it and pour it out.
2. When cleaning an electric kettle, do not make a highly concentrated acid solution, which can corrode the plastic walls and heating elements.
3. Be sure to warn your family members not to drink tea at this time, because instead of water, they can pour acid into the cup.

Many housewives have long known how to descale a kettle with citric acid. But it turns out there are many other cheap and reliable ways to do this easily.

Scale appears due to impurities contained in poor-quality water. During boiling, they settle on the walls of the kettle and spoil the taste of hot drinks. Also, scale does not conduct heat well, so a dirty kettle will boil longer.

How to clean a kettle with vinegar

The method is suitable for very dirty teapots made of plastic, glass, stainless steel.

You will need:

• ½ liter of water;
• 1 cup 9% vinegar or 2 tablespoons 70% vinegar essence.

Heat water in a kettle, and then pour in vinegar or vinegar essence and leave the solution for an hour. During this time, the scale will soften. Rinse the kettle from the inside with a sponge, boil clean water again and drain it.

How to clean the kettle with lemon or citric acid

The method is suitable for electric kettles made of stainless steel, plastic or glass with a moderate layer.

Not suitable for enamel and aluminum kettles.

You will need:

• ½ liter of water;
• ¼ lemon or 2 tablespoons citric acid.

Heat water in a kettle and put a piece of lemon or citric acid into boiling water. Leave the scale to soak for 1-2 hours. Rinse the teapot with a sponge and rinse thoroughly. After the first boil, the water will need to be drained.

How to clean a kettle with baking soda

The method is suitable for any kettles.

You will need:

• ½ liter of water;
• 1 tablespoon baking soda.

Stir the baking soda in a glass of water so that it dissolves completely. Pour the resulting liquid into the kettle, add the remaining water and boil it. Wait half an hour or an hour and heat the kettle again.

Now you can wash the kettle and boil clean water in it. True, after it will have to be poured.

How to clean a kettle with soda

The method is suitable for stainless steel kettles heated on a stove.

Not suitable for aluminum, enamel and electric kettles.

You will need a bottle of any lemonade. The most famous option is cola, but it is better to use a colorless drink (it is important that the composition contains citric acid).

Let an open bottle of lemonade sit for 2-3 hours to eliminate gas bubbles. Then it's simple: pour the drink into the kettle and bring to a boil. Then thoroughly wash and rinse everything.

How to peel a kettle

The method is suitable for enameled and metal teapots with a weak layer of scale.

Not suitable for electric kettles.

You will need:

• ½ liter of water;
• skin 2-3, apples or pears.

Rinse the cleaning from dirt and sand, put them in a kettle and fill with water. Boil the liquid and leave to infuse for one to two hours. A light layer of scale will come off on its own, rub stubborn dirt with a sponge for washing dishes. After rinsing, the kettle will shine like new.

If you have a particularly capacious kettle, and scale has accumulated on the walls, take large quantity water than indicated in the recipes. The liquid must cover the contaminants completely.

How to keep the kettle clean for a long time

1. Pour soft water into the kettle. If you don't buy bottled, use a filter. Or at least stand your tap water for a few hours to allow the impurities to precipitate.
2. Boil water in the kettle no more than once. Better fill it fresh.
3. Rinse the inside of the kettle at least once a day. And ideally before each use.
4. For prevention, once a month, boil a filled kettle with one tablespoon of citric acid.

Stainless steel teapots are very popular with customers. They heat water very quickly, do not undergo oxidation and rust. But such models have a significant disadvantage - the rapid contamination of the surface both from the inside and outside. Scale deposits build up inside, and the outer surface becomes dirty from splashes during cooking.

You can clean the pollution with a special chemistry designed for this, as well as improvised means.

Cleaning the outer surface

To remove typical dirt on external surfaces, you can use fairly simple and absolutely safe methods. Whatever method the hostess chooses, process metal surface you need to effortlessly, otherwise you can leave scratches that will become even more dirty.

Baking soda

So in a simple way metal teapots and enamelware are perfectly cleaned. To obtain a good result, the kettle must be warmed up before cleaning. To do this, pour some water into it and boil over medium heat.

After that we do the following:

Even electrical appliances can be cleaned in this way, but care must be taken to ensure that moisture does not get inside the appliance itself.

There is another way outside. It perfectly relieves dishes from grease:

If the surface is very heavily soiled with grease, then a few teaspoons of dish detergent can be added to the solution.

Laundry soap or toothpaste

Ordinary laundry soap will help to easily remove minor dirt. To do this, you just need to lather a washcloth for washing dishes and wipe the device with it. This will require some effort. After removing greasy deposits, you can remove the soap residue with a damp cloth and wipe dry with paper towels.

If you use this method regularly and clean the outer surface of the dishes at least once or twice a week, you can avoid severe contamination.

You can clean a metal kettle with toothpaste. It is absolutely simple and does not require huge efforts from the hostess. To clean dirt, you will need to do the following:

1. Squeeze some toothpaste onto a dishwashing sponge.
2. Effortlessly treat dirt.
3. Put the dishes under warm running water, and then rinse with cold.
4. Wipe the dishes dry with a paper towel.
5. Pour water into a bowl and heat a little on the fire.
6. Remove it from the stove and polish the surface with a soft cloth.

If the contamination is too strong, then the paste after application should be left for a while on the dishes, and then rubbed with a dish sponge with some effort.

Do not use whitening paste for this method, as it contains abrasives that can scratch the metal surface.

Vinegar

Contaminants are perfectly removed with the help of a soda-vinegar solution. It is necessary to take a container in which the kettle will completely fit.

Soap and glue or activated charcoal

A burnt kettle can be revived by boiling in a solution of soap and silicate glue. To do this, we take a large container in which the whole kettle will fit, and collect water into it. Next, add 100 grams of laundry soap to the water, which you need to grate or make shavings with a knife, and add 80 grams of glue.

We lower the kettle into the solution and boil for about 15-20 minutes, after which we let it cool. We wipe the surface with a sponge and rinse the dishes in water.

You can give a second life to a kettle that has burned out with the help of activated carbon. Grind the tablets into powder and rub them on the surface of the dishes. Leave for ten minutes and rinse with water.

Household chemicals

In very difficult situations, you can use cleaning products:

• Silit;
• Shumanite;
• Pemolux;
• Sif etc.

They are able to cope even with old stains and soot. They must be used with extreme caution so that the cleaning agent does not penetrate the dishes. After washing, the kettle must be rinsed very thoroughly several times. For reliability, you can boil water in the kettle several times and drain it.

It is mandatory to use gloves when working with such aggressive cleaning products, otherwise you can damage the skin.

Cleaning the inside

The plaque that forms in the kettle must be cleaned regularly. This is done at least once every three weeks. If the water in the house is hard, then the procedure should be carried out more often.

The following products are suitable for descaling:

• lemon acid;
• vinegar;
• spoiled milk;
• fruit peel decoction.

Citric acid and lemon

This method is especially popular with housewives due to its simplicity and accessibility. Citric acid is able to remove plaque both in an electrical appliance and in an ordinary kettle.

To do this, you just need to follow a few simple steps:

• fill the kettle two thirds with water;
• pour a tablespoon of citric acid per liter of water;
• boil the solution for several minutes (boiling time depends on the degree of contamination);
• leave until completely cooled;
• drain the water and rub the inside of the kettle with a sponge;
• rinse well with water.

If plaque still remains inside, then the procedure must be repeated until it is completely removed.

Fresh lemon can easily replace citric acid. To clean in this way, you need to do the following:

1. Cut the lemon into slices.
2. Fill a third of the kettle with water.
3. Send the lemon to the water and boil.
4. It is better to boil the lemon for about thirty minutes, so the effectiveness of the method will increase significantly.
5. Drain the water and wipe the surface with a sponge for washing dishes.

If the result is not perfect, then the procedure must be repeated until the kettle is completely free of scale.

Vinegar or Coke

This method is applicable only to an ordinary kettle, it is not recommended to use it for an electrical appliance.

So, to clean the inner surface you need:

This method is able to rid the kettle of even the thickest and oldest scale deposits.

This delicious and beloved drink contains. She also relieves the kettle of scale. Its effect is rather weak, it may take up to four boils to clean the scale. Coca-Cola cannot cope with old and serious pollution. But it can be used to clean electric kettles.

Soda should be poured into the dishes in such an amount that it covers all contaminated areas. Then it needs to be boiled for a while and left to cool. After draining the Coca-Cola, the kettle is wiped with a sponge for washing dishes and very well washed in warm running water.

Vinegar and soda

It's pretty effective remedy can be used to clean only ordinary kettles, it is not suitable for an electrical appliance.

The procedure consists of several stages:

1. Pour warm water into the kettle.
2. For each liter of clean water, add one (without a slide) tablespoon of soda.
3. Boil the solution for about half an hour.
4. Drain the water and soda and, without rinsing, fill the vessel with water and vinegar (100 ml of vinegar per 1 liter of water).
5. Boil for another half an hour.
6. We wait until it cools completely, after which we wipe it with a rag.

If the scale is old, then after the soda solution, you can use citric acid(add a tablespoon of citric acid per liter of water). This liquid must be boiled in the same way as vinegar, and after it the vinegar solution must be boiled.

Apple or potato peel

This method will only help with a thin coating.

Fruits and vegetables should be thoroughly washed and peeled. Cleanings are placed in a kettle and filled with warm water. The mixture must be boiled for about half an hour, and then allowed to cool. After the done manipulations, everything is drained and the dishes are wiped with a rag or sponge with dish detergent. The kettle must be rinsed very well in running water.

Cucumber pickle or sour milk

Another non-standard way to remove scale and plaque is cucumber pickle. It contains vinegar, so this method is not suitable for an electrical appliance.

Pour the brine over the kettle and boil it for thirty minutes. After cooling, rinse thoroughly with water.

Sour milk can remove scale from both an ordinary kettle and an electric one.

To do this, pour sour milk into a kettle and bring it to a boil. Then wipe with a cloth using dishwashing detergent. Dishes should be rinsed very thoroughly with clean water after cleaning.

Ways and there are a great many. But in order not to suffer in the fight against old and thick plaque, you need to regularly clean your favorite kettle for preventive purposes.

Attention, only TODAY!

My greetings to all. Every housewife dreams of having a clean kettle that pleases with a pleasant tea party. But scale often accumulates on its walls. Today we will learn how to clean the kettle from scale.

What is scale dangerous and why you need to get rid of it

Scale is dangerous in that when it penetrates our body, it harms it, although we may not notice it right away. Scale in the kettle is salts, harmful impurities and insoluble metals.

If for many years they enter the body, then a person may develop osteochondrosis, gout, kidney stones and other misfortunes. Even if you pass water through a filter, salts still remain. The most best water for boiling - spring or from bottles.

Cleansing Methods

Plaque on the walls of the kettle can be cleaned. Many housewives try to buy the most expensive products in the store, even realizing that they cause great harm to their health. Isn't it better to find ways that at home will make any dishes shine.

Cleaning won't take long. It is enough to clean the dishes once a month so that the plaque recedes to long time. With very hard water, this will have to be done twice a month. If the layer is small, then the easiest way is to cleanse with citric acid:

• Fill the kettle cold water, for 2/3 of the volume.
• Pour 1 tbsp. l. acids per 1 liter.
• Boil for 5 minutes.
• Wait until cool, then drain the water.
• If the plaque has not disappeared, repeat again.

But citric acid is only suitable for electrical products as well as stainless steel or glass. The coating of enameled and metal products may deteriorate.

For simple and electric kettles stainless steel or glass Lemon cleansing is fine. Lemon can remove plaque of any thickness:

• Cut the lemon into small slices, put in a container.
• Pour 2/3 of the container with water, put on fire.
• After boiling, reduce the fire.
• Boil the lemon for 30 minutes, then let cool.
• Drain the water, remove the rest of the layering with a soft sponge.

metal teapot you can clean it with vinegar, but it’s better not to touch the electric one:

• Pour in the water too.
• Pour in vinegar - 0.5 cups per 1 liter of water (essences - 3 tsp per 1 liter of water).
• Boil, leave to brew for 1 hour, then drain.
• Before boiling water for tea, boil twice and drain to remove the smell of vinegar.

This method will quickly and efficiently remove any layer, but you need to rub it with a sponge, achieving the perfect shine.

Cleaning with vinegar will spread an unpleasant odor throughout the room. Do not forget to open the window or turn on the hood.

A delicious drink will help in the household: Coca-Cola from scale

We are talking about the Coca-Cola drink, which contains the acid we need. To clean with Coca-Cola, you need to take enough liquid so that it covers the bottom with a sufficiently large layer. Then boil and leave for 1 hour so that the acid corrodes the sediment. After this procedure, wipe the bottom and walls with a sponge. Sprite and Pepsi will do.

If the kettle has been in a running state for a long time, then you need to do this procedure 2-3 times. This drink cleanses well electrical appliance.

Almighty Soda

Where only soda is not used! It heals and makes pastries more fluffy and tasty. For laundering scale, it is also useful to us. This powder can be used to clean both electric and enameled vessels.

The advantages of cleaning with soda include its cheapness and safety. There are also disadvantages. Baking soda can scratch the surface of the product.

Carrying out the procedure:

• Pour water up to half of the container.
• Pour 2 tbsp. soda.
• Boil for half an hour, let cool.
• Wash the inside with a sponge.

Vinegar and soda. With these ingredients, you can bring an enameled and metal teapot to a shine, it is better not to touch the electric one.

1. First, boil water with soda for 25-30 minutes, 1 tbsp. l. for 1 liter of water.
2. Pour out the liquid, fill in a new one.
3. Pour 0.5 cup of vinegar per 1 liter. water, boil again for 30 minutes.
4. Wipe inside with a sponge to remove loose plaque.

Method for all types of cookware, except for electric ones. Soda, vinegar and citric acid will help get rid of old scale. You will have to boil the dishes three times, first with soda, then with citric acid, then with vinegar. Proportions as above.

Cleaning - in business

Hard salts will help remove apple or potato peels. It turns out that they also have acids that can cope with plaque. You can put potato, apple and pear peels together.

If you notice salt deposits inside the new dishes, then put cleanings in it, fill it with water, put it on fire for half an hour. But this remedy will not help with thick scale.

For all types of tea utensils, you can use pickle from cucumbers, where there is vinegar or citric acid. Just fill the container with brine, hold on fire for 30 minutes. Here is a simple way used by our grandmothers.

A glass teapot will clean lemon juice and soda well. Pour in water, pour in 2 tbsp. lemon juice and 2 tbsp. l. soda, boil for 15 minutes. Pour out the water, wipe the inside with a soft sponge. Instead of juice, citric acid is suitable.

The best products for cleaning a thermos-kettle

Thermos kettle will take more electricity if it is not periodically descaled. In addition, you will feel a salty taste of water, the device will make a lot of noise during operation. If you neglect cleaning, the device may simply burn out.

Soda and citric acid will help best.

1. First, pour 1 tbsp. soda, boil, wait for the liquid to cool.
2. Drain the solution new water.
3. Put 1 sachet of citric acid, boil again, leave to cool, then drain the solution.
4. Pour clean water, bring to a boil, then pour. The device is now ready for use.

Can be cleaned vinegar essence. Take 1 liter. water 50 ml essence, bring to a boil, leave to cool. good method- cleansing with a colorless Sprite, as described above.

ceramic appliance can also be cleaned by the means described above.

Simple ascorbic acid will also help to achieve shine inside the dishes. 1 tbsp is enough for 1 liter of water. l. ascorbic. This is a safe but effective method, especially if the inside is heavily soiled.

With a little pollution, you can simply pour soda into the water and hold for several hours. After each purification, the first boiled water must be poured out to remove the remaining lime. This applies to all types of tea utensils.

plastic teapot it is best to clean with ascorbic acid and soda. The technique is described above.
Use citric acid to shine an aluminum appliance. Pour water, pour 1 tbsp. citric acid, bring to a boil, let cool.

Cleaning the outer surface

It is easy to bring stainless steel dishes to a shine on the outside if you use folk remedies.

The easiest remedy is toothpaste.

1. Take the old toothbrush which has lost its rigidity.
2. Squeeze toothpaste on it.
3. Wipe the entire surface of the instrument.
4. Rinse first with warm, then cold water.
5. Pat dry with a towel.
6. Pour water into the kettle, warm it up a little, polish the warm appliance with a soft towel.

If the contamination is large, then squeeze the toothpaste onto the hard side of the sponge and gently rub the surface. Don't press too hard to avoid scratches. Scratched dishes will become more dirty and harder to clean. If the kettle is burned on the stove, then most likely it will have to be thrown away.

Another way to achieve shine is to boil for 30 minutes in water, where to add salt and soda - 1 tbsp per liter. spoon. It is important that the kettle is completely submerged in water. Then wipe it off with a soft sponge.

Another way:

• In heated water, pour 3 tbsp. spoons of baking soda and;
• Dip the dishes in the solution;
• Boil for 5 minutes, leave to cool;
• Rinse with water, polish with a towel.

It is better not to bring the stainless steel device to contamination. After each boiling of water, polish it. If there is no time for cleaning procedures, it is better not to buy such dishes.

Enamel teapot can be cleaned with ordinary soda, but do not rub hard so that there are no scratches. Plain soap - the best remedy. Lather the sponge with soap and thoroughly walk over the surface, then rinse with warm water. If you do not run the dishes, then this method will prevent your dishes from getting very dirty.

An aluminum kettle can be cleaned with. Pound 15 tablets of coal into powder, moisten the walls of the container, apply the powder, hold for 1 hour, then rinse with water, dry with a towel.

Descaling detergents

In stores, you can find enough detergents to help clean the outside of any kettle. The main thing is that they do not get inside the dishes.

When working with detergents It is better to wear gloves, do not touch your eyes.

Dear friends, you have learned many ways to clean dishes, use them and drink pure delicious tea!