Do-it-yourself stork for the garden: three unique ways to craft from improvised materials. Lessons for beginners: we make a snow-white stork for a garden from plastic bottles How to make a stork from a tree with your own hands

Have you thought, dear readers, that it can be used as ... a material for the manufacture of art objects. Although it may not be art, as such, in its literal sense, but a decoration for the garden - a small sculpture, it is quite possible to do. Indeed, polyurethane foam is unusually plastic, hardens quickly and is easily processed - why not a material for creativity?

Today I will tell you how to make polyurethane foam sculpture of a stork to decorate your garden or summer cottage. There are very few materials needed, and they are very cheap. If you pay attention to how much garden sculptures cost in hardware stores, you will realize that the price of a pair of foam cans is incommensurate with their cost. In addition, the stork will work out much better for us. So let's get started.

stork frame

To begin with, we will select a suitable body for the stork - a frame on which foam will be sprayed. A plastic canister from under water with a capacity of 5 liters will do just fine. We make the neck of the stork from wire, and to add volume, you can wrap strips of foam plastic on the wire. The legs of the stork can also be made from wire, and the nose and head can be cut out either from foam or from wood - whichever is more convenient and preferable.

Sculpture making

After making a simple frame, we proceed to spray foam on our sculpture - we do it carefully, presenting the contours of the finished stork. To make it easier, print big bird. If the foam does not fall as you intended, no problem - after drying, the excess is easily removed with a knife. By the way, if you wish, you can use real bird feathers for the tail - who knows, maybe you can do it instead of a peacock stork. After the foam has dried and finished with a knife, we paint the sculpture with ordinary acrylic paint, fix it in place in the garden, and invite friends to appreciate your creative genius. Good luck!

First, decide where you will place the stork figure, because it depends on what base the craft will have. Traditionally, such figures are mounted on trees, building a nest of branches under them. But you can place a stork on the roof of the house or in a flower bed on the ground.

We decided to make a whole composition, which will include not one, but two figures of a stork, if you repeat everything exactly after us, you will get the same thing.

Prepare the following materials ahead of time

Plastic bottles.
- Wide board.
-Metal rod or thick enough wire.
- A sheet of foam plastic with a thickness of at least 10 centimeters.
- Corrugated hose, can be used, left, for example, from an old vacuum cleaner.
- Plastic canisters with a volume of at least 5 liters.
-Metal mesh, from which we will make wings for the bird.
-Stapler.

How to make a stork figure

Despite the fact that the figure turns out to be spectacular, it will take only a few hours to create it.

First of all, with a sharp knife, cut out the bird's head from the foam plastic with a base under the beak. Immediately make eyes, you can draw them, or glue black beads instead.

Cut out a beak from a bottle of a suitable color. Ours consists of two parts. Do everything exactly as in the photo. The finished beak is glued to the head.

Now let's create the bird's body. For this purpose, we have prepared a canister, from which we will immediately cut off the handle so that the shape is close to the real body of the stork. We attach a mesh to the body, bent in the shape of a canister. We cut off the excess parts immediately.

We make the legs from a rod, and we prepared the board as the base of the figure. Attach the rod to the board as shown in the photo.

Now let's move on to the most interesting: we will decorate the figure with plastic spoons. Start with the tail, gradually moving further along the body.

The head and body are connected with a wire, and to make the neck look natural, we put a corrugated hose on the wire. From plastic bottles we make overlays so that they look like feathers.

Also, the carved elements of the bottles go to the feathers of the wings. Lay so that each next row partially overlaps the previous one. You can fasten the plastic together with a stapler.

At the last stage, we connect all the details together. It turned out the figure of a bird, but to give it the greatest realism, it should be correctly painted. Pay attention to what details of the figure are painted.

Having the skill of making a stork figure, you can make other bird figures: plastic bottles and spoons make an excellent imitation of plumage.

An old legend says that God gathered all the reptiles from the Garden of Eden into one bag and ordered the man to throw him into the sea with his own hands. And curious Homo sapiens wanted to look at the creatures, untied the bag, and, of course, missed everyone. Vladyka became angry and turned this man into a stork so that he would protect other people from all kinds of toads and snakes. Since then, storks have always settled near a person, feed on reptiles and bring us happiness.

Many old pictures depict a stork with a baby. Among the Slavic peoples, it is customary to believe that this particular bird is responsible for childbearing and well-being. If storks settled on the roof, the house will be full of happiness and children's laughter. And if you haven’t settled, then a wonderful stork with a baby can be made with your own hands from improvised material and installed on a skate or on an apple tree in the center of the garden.

bottled happiness

It will take

To make a stork from plastic bottles for the garden, we need to prepare the following materials:

empty bottles;
thick wide board for the foundation;
a rod or thick wire for legs;
a piece of foam 10 cm thick;
corrugated hose from a vacuum cleaner;
2 plastic canisters with a volume of 5 l;
metal mesh for wings;
stapler.

Master class on making happiness

It only takes a few hours of passionate DIY work to make almost real storks appear on the paths of your garden.

Cut out a head with a beak from a piece of foam, draw eyes or glue black beads with your own hands.

Cut out a two-piece beak from a dark bottle and glue it in place.

We begin the master class on making the torso by cutting off the handle in the canister. Then you need to bend the mesh in the shape of a canister with your own hands and cut off the excess.

To make the legs, bend the bar and fasten its ends to the board.

We are holding a master class on the preparation of plastic feathers.

We attach the feathers to the canister, starting with the tail.

The master class on fitting the neck begins with attaching the reinforcement wire. Then a hose is put on it.

Attach small "feathers" on the neck with tape.

Fix the feathers on the grid.

The stork for our garden will stand with its wings folded, so we simply fasten all the feathers with a stapler with our own hands, overlapping each previous row by a third.

We finish the master class by connecting all the details and decorative tinting of the eyes, beak and legs. This bird can be installed with your own hands in the depths of the garden for the whole summer. It will not deteriorate from the rain and will not fly away.

Today's fashionable toys are hand-sewn from ordinary fabric according to simple patterns. We will not fully describe the master class for their manufacture.

Cut out the details of the craft from the fabric, sew and stuff with any filler.

Separately, you need to make a beak (can be made of cardboard) and attach to the head. It remains to make clothes, glue eyes, wrap the baby and hand it to the stork.

Of course, you cannot settle such a wet bird on the branches of a garden, but flower pot on the windowsill she can decorate.

Another way to make your home rich and happy is to make a stork on a nest. As a basis, you can take patterns of a tilde bird. Cut feathers out of plastic white milk bottles, fasten them together and make wings, decorating the ends with real feathers. Place a few white feathers on top of your head. Form a tail out of real feathers, sew or glue eyes and a tie, and plant the bird in the nest.

It can be made from ordinary rods, fastened with wire. To get a stork with a baby, put any doll in his wings. The master class on making a lucky amulet is over.

These two rag birds cannot be left on the paths of the garden, and the master class for making the first stork requires a lot of time and materials. Do not be upset and just make a nest and cut a flat bird out of textolite or plywood. Color it in, give it a string bag with a baby doll in its beak and that's it, the stork with the baby has already settled on your roof.

A beautiful and bright figure of a stork will bring a touch of grace to the backyard landscape, especially if it is made by hand. It may seem that making a stork is difficult and requires many years of practice in needlework, but the method of making it is simple and the materials are inexpensive. This sculpture would be a great addition to adjoining territory and decoration for flower beds, lawn and garden plot, symbolizing prosperity, well-being and family comfort of its owners.

How to make a stork for a summer residence with your own hands: a master class

A do-it-yourself garden stork is one of the favorite crafts of summer residents and gardeners, and there are a lot of variations of its execution on the Internet, but the manufacturing principle is approximately the same in all cases, regardless of the materials used and the richness of the decor. Read how to make beautiful wooden signs for your home.

First of all, the head, neck, torso, wing frame and legs are made, which are connected with fastening tools.

All the remaining time is devoted to a rather painstaking procedure for cutting, fringing and decorating feathers - they will make up the plumage of the body, neck and tail of the bird. There are homemade options without the use of plastic bottles, but they are less common. Let's take a closer look different variants making a stork in this article.

Materials and tools for a garden figure

The figure of a stork is made up of a head, beak, neck, torso, paws, wings and white plumage with layers of black feathers. All parts are fastened together with a furniture stapler and seated on universal glue.

The body of a stork can be cut out of wooden block desired size, foam or a 5-liter plastic canister.

plastic bottles 1.5 and 1 l from milk;
plastic bottles of 1.5 and 0.5 liters from kvass or beer;
canister 5 l;
scissors;
glue;
self-tapping screws;
a piece of foam;
corrugated tube;
steel bars;
frame mesh;
thin wire;
sandpaper;
furniture stapler;
red acrylic paint.

The plumage of the stork is also made from transparent bottles, but then the plastic under the feathers should first be painted with white and black acrylic paints.

Production steps from plastic bottles

Having prepared necessary materials and tools, you can start making constituent parts crafts. Learn about beautiful wooden fences with your own hands.

It is important that all parts of the stork's body are proportionate to each other.

Head

With a sharp knife, the contour of the head with the beak is cut out of the foam, after which the surface is polished, and the edges of the beak are leveled with sandpaper. If desired, the head can be painted with white paint - the coating will give the future product a rich White color and will create an additional barrier from the sun, wind and rain.

The beak consists of 2 plates that are attached to the head with self-tapping screws. For a beak, the neck and bottom are cut off from a dark plastic bottle, and the rest is cut into rectangular plates. Triangles are cut from the resulting blanks, which will subsequently be the upper and lower parts of the beak.

The plates are bent in the middle and screwed to the junction of the head and beak.

Paws

The paws are cut out of 2 half-liter bottles with dark walls, after cutting off their bottom. The fingers of the future bird are cut off from the very edge to the neck of the bottle - you should get 3 in front and 1 in the back, and bend outward.

Each finger is shaped into a long, sharp triangle with scissors.

Plumage

Processing blanks for feathers to give them a beautiful natural shape with feather veins is the most labor-intensive and long part of the work.

To cut feathers, the bottom and neck of the bottle are cut off, and the cylinder of the bottle is cut into 6 equal parts - 6 feathers. They will be of different sizes: for plumage of the body - small, for the tail - longer. Each feather needs to be given airiness by creating a fringed fringe around the edges. He will tell you about metal forged gazebos for giving.

Plumage on the neck can be done in 3 ways:

cutting out even smaller plates than for the stomach, decorating them with a fringe and curling them with scissors;
cutting off large plates to the length of the neck and serrating their edges;
cutting off half of the bottle and making deep sharp cuts in the resulting plates.

Each pen is a rectangular plate made of a plastic bottle with a rounded or embossed edge.

frame

The body of a stork is conveniently made from a 5-liter canister, from which the handle is first cut off. Then a mesh is attached to the container, to which future feathers will be attached - it is bent and cut in the shape of a wing.

Next, you can proceed to assemble the main part of the product - a neck tube is inserted into the neck of the canister, and 2 holes are cut in the lower part, through which a long piece of a thick rod bent in half is threaded - these are paws.

The nets are fixed with wire or steel brackets on the canister.

Assembly and decoration

The stork is assembled starting from the head - it is connected with a wire to a corrugated tube and additionally fixed with hot glue.

Feathers are fixed with a stapler, starting from the bottom of the canister and then upward in layers. The tail is attached to the back of the figure. The plumage is also applied to the mesh in layers, starting from the outer edge, and fixed with wire. In this case, black feathers are located on the outer edge. You will get only about 6-7 layers of feathers. The extreme row connecting to the tube is screwed with self-tapping screws.

Prepared plates with pointed edges from half bottles are wrapped around the neck.

The number of feathers depends on the location of the wings: the option under consideration is designed for folded wings, but when flapping, the wing mesh is covered with feathers from 2 sides and the back of the stork is also made.

After assembling the bird, you can proceed to the creative design of the craft.

Eyes can be bought ready-made in stores that sell parts for knitted and sewn toys, and glued with hot glue. For plug-in eyes choose large black beads or balls. You can also draw eyes - with simple black or colored paints to your taste.

It is necessary to paint feathers, if transparent bottles were used during work, before cutting them, after wiping the surface of the coating with an alcohol solution.

The beak and legs of the product also need to be painted with red paint. Alternatively, you can wrap them with red tape.

What else can you make a stork from

Craftsmen manage to create masterpieces from everything that was lying around in the garage, including, and also use the remnants of building materials after repairs. Several of these variations of garden storks can be safely taken into account - it will not be more difficult to make them than the previous version.

From polyurethane foam

In this way, you can create a garden sculpture by turning and giving the figure of a stork a realistic image. The “skeleton” of the product will be a steel frame - steel bars are welded to each other, and then other elements of the stork's body are mounted on them.

To make a stork you will need:

5 liter plastic bottle;
mounting foam;
steel bars;
Styrofoam;
dye;
ground solution;
scotch;
rasp.

You need to put on the body-bottle on the frame, and attach the sharpened pieces of polystyrene to each other with adhesive tape to the neck rod. Figured foam hips are fixed in the same way.

Even with the use of waterproof plywood, the possibility of the sculpture getting wet during the cold season increases, so it is recommended to store it indoors before the onset of heat.

To make a stork you will need:

plywood;
plastic bottles with white and dark walls;
hot glue gun;
rods;
jigsaw;
self-tapping screws;
scissors;
screwdriver;
furniture stapler;
red acrylic paint.

It is advisable to apply the elements of the body and wings first on paper, creating a “pattern” of the details before cutting them out on a sheet of plywood. The wings are screwed to the body with self-tapping screws. The paws are made of steel rods and are attached with brackets to plywood sheets that act as a torso. Plywood sheets are also used for or.

Feathers are created from bottles, and each plate, in turn, is processed along the edges with scissors to obtain an airy fringe. The plumage is applied to the entire surface of the stork, starting from the back: first, black feathers are laid out, and then white, from which the tail of the bird is also created.

Each blank is sanded along the edges and the surface is primed.

a layer of red paint is applied to the plywood beak;
eyes can be drawn independently.

The bars of the legs can be sharpened from the bottom edge so that they easily fix the product in the soil.

Styrofoam

Styrofoam stork is a monolithic structure, lightweight and easy to manufacture.

For work you will need:

foam sheets;
steel bars;
glue universal;
scissors;
saw;
furniture stapler;
sandpaper;
Acrylic paint in black and red.

First of all, paws are made - the lower edges of 2 steel rods are sharpened, and the upper ones are bent for subsequent fixation in the foam body.

Main creative work over such a stork is to create the correct foam blanks, because the finished bird will consist entirely of it. The body, head and neck are drawn in foam and cut with a saw. Pro plastic barrels for watering at the cottage will tell.

Iron rods are fixed in the stork's body with brackets, its surface is sheathed with a layer of foam for volume, and wing blanks are glued on top. The neck and head are mounted on a rod.

The stork's beak is painted red, and it is better to make false eyes, from beads or balls - this way the figure will turn out more expressive.

Next, the final modeling of the figure is performed, giving it smooth and beautiful features with sandpaper and a knife. This is the case when you do not need to make feathers for a bird - the relief plumage can be cut directly on the body of the product, simply by accentuating the edges of the wings with black paint.

How to make a garden stork nest

The classical composition with storks in the nest traditionally symbolized cozy house with a large family among the East Slavic peoples, indicated the fertility and hospitality of the owners. Installing storks in a nest on your own plot, in a flower bed, on the roof of a house or on a recreation area with children will help not only decorate the territory, but also show guests that the owners are jacks of all trades. He will tell about street country washbasins.

Old wheels from a bicycle, cart, trailer or wheelbarrow will fit under the nest frame. You can weave a nest from a bush and live or dry branches, fixing the entire structure with steel wire and installing it on a special platform consisting of X-shaped linings.

Video

How to make a stork from plastic bottles, see this video:

Conclusion

The most laborious and work on garden stork consists in creating its plumage - it is necessary to work on each feather manually, giving the edges a jagged or fringed shape so that they look like natural feathers birds.
Feathers from transparent bottles should be dyed white and black to mimic the natural plumage of a stork.
Before painting the feathers, they must be wiped of dust and wiped with an alcohol solution so that the paint lies evenly.
The easiest way to make a stork is to make it entirely out of Styrofoam and sharpen it with a knife and rasp to desired shape; the simplest wing without a frame is made from a piece of plywood, which is screwed to the homemade body with self-tapping screws.
The body with the neck can be made from a plastic 5-liter canister with a cut off handle and neck, into which a corrugated tube is then inserted.
It is also possible to make a garden sculpture from the remnants of building materials lying around after repairs, and it will cost almost free. In addition, you will only need to buy acrylic paints in order to draw the eyes and and color the feathers.

Natalya Vladimirovna Zhulina

At the end of summer in our kindergarten has become a tradition at the end of the summer to hold an exhibition crafts made from natural materials. In this I decided make a picture of different seeds, cereals and branches.

Equipment and material:

1. White sheet of paper.

2. Background paper.

4. Acrylic varnish, brush.

5. Simple pencil.

6. Scissors.

7. Pumpkin seeds, sunflower seeds.

8. Buckwheat, rice cereals.

9. Branches, straw, moss.

10. Red, black gouache.

11. Pistachio shell.

On a white sheet, draw a pattern of a bird.

Cut out.

We take the background sheet and draw the contour of the bird according to the template.

We apply glue to the image, and start laying out the head and body of the bird from pumpkin seeds.

We make a bird's wing from sunflower seeds.

Legs from buckwheat.

We make the beak from rice cereal and paint it with red gouache, make the eye out of pistachio shells, paint it with black gouache, and for the expressiveness of the look we apply a drop of white gouache.

From branches, straw and moss making a nest, waiting for everything to dry, stick,

then we cover everything with varnish, wait for it to dry and insert it into the frame.

The picture is ready.

The stork spent the summer with us,

And now he is staying somewhere.

For this work, I received first place and was awarded a diploma.

I will be glad if someone master class - useful in working with children.

Thank you for your attention.

Related publications:

Master - class "Coat of arms of the Irkutsk province" from natural material. I bring to your attention step by step master class to make a coat of arms.

Autumn brings a lot natural materials for adult and children's creativity - these are chestnuts, acorns. Pine trees are especially popular.

Dear Colleagues! Your attention is invited to a master class on the production of game material for children of primary preschool age.

Today, children rarely walk on the ground. To prevent the development of flat feet, the surface on which we walk barefoot must be uneven.

Except building material, paper, in kindergarten, waste material is also used for construction. When teaching children to design.

You often come across the question "what can be done with a child of the nursery group so that it can be shown to the competition?". Colleagues, a lot.

Crafts from acorns belong to a simple and fascinating type of creativity and represent a rich field for imagination. Acorns are easy to color.