Do-it-yourself rocking chair from a spring. Different hanging chairs for home or summer cottage - do it yourself. We use wood and plywood

Hanging chairs are an alternative to a rocking chair on skids at home and a hammock in nature. Comfort and easy rocking will help you relax and unwind after a hard day. A variety of models and materials for manufacturing allows you to harmoniously integrate such a chair into any interior. And it is not necessary to spend money on the purchase. Some models are easy to make with your own hands.

Types of hanging chairs

They produce a variety of models and designs. They can be made of wood, metal, rattan, wicker, transparent plastic. There are models that you can easily make yourself.

Swing chair. Fastening is carried out at two points. Due to this, the structure sways in one plane. There are soft models (hammock chair) or on a rigid frame:
- the basis of the first option is a soft fabric or woven fabric, which is easy to sew, weave with macrame technique or crochet - the ends of the panel are attached to the transverse bar with 4 slings, and it is already suspended from the ceiling or a stand-leg;
- the second option has a rigid frame made of acrylic, plastic, wood, rattan or metal in the form of a hoop covered with a soft base.
Nest chair. The basis of the design is 2 strong hoops. The model has a flat bottom and low sides, which are braided with a cord, rope or tied with strong threads.
The chair-cocoon (egg) differs from its counterparts in greater closeness, often up to 70%. The back and sides are high and connected above the head. The rigid frame is braided with a suitable material or sheathed with fabric. Varieties of this model - a chair-basket and a chair-drop - ideal for a child's room.

Hanging chairs of various shapes - gallery

Techniques and finishing materials

Such chairs usually have a rigid frame and a seat made of various materials.

Textile. An affordable and easy-to-use material, the density and strength of which is selected based on the expected load. Suitable raincoat fabric, tarpaulin. The chair for children from old jeans with pockets and rivets looks original.
Knitted fabric. Craftsmen who know the technique of knitting or crocheting can use their skills to create an original chair from plain or multi-colored threads.
Macrame. Weaving from a durable cord will not only last a long time, but will also give a special flavor to any interior.
Vine, rattan. Armchairs made of eco-friendly materials will decorate any interior, but special skills are required to work with them. In addition, rattan does not grow in our country.

This is interesting! Unusual and very durable material for braiding a chair - a thread of plastic bottles. Such a chair will not get wet, does not deform, it can be hung on the street.

frame material

The base of the chair can be made from different materials.

Gymnastic hoop. Only suitable for child seat, for an adult, its strength is not enough, because the cross-sectional diameter is 16 mm, and for the frame of the chair you need 2 times more.
Metal pipe. The product from it will turn out to be durable, but heavy - at least 7 kg. For its manufacture, pipe bending equipment is required.
Tree. The design will be durable, lightweight, environmentally friendly. Since the material absorbs moisture and dries out in the sun, wood for outdoor chairs must be treated with impregnations. This will protect the material from decay.
Metal pipes. Durable, lightweight and non-corrosive material. When using coiled pipes, there is no need to bend them. The ends of the segment are connected with a wooden or plastic insert and secured with screws.

Do not use dilapidated material in the manufacture of chairs: such furniture will not last long.

Hanging rockers made of various materials - gallery

We make a hanging chair with our own hands

A handmade hanging chair will look good in the country house or on the veranda of a private house. The easiest to manufacture is a hammock chair. It can be done in several ways from different materials, but the most convenient and uncomplicated of them are macrame or textiles.

Hammock without frame

For work you will need:

dense fabric - 1.5x1.5 m;
durable cord;
wooden rod for fastening;
sewing accessories.

After preparing everything you need, proceed to the assembly process.

Swing on a rigid frame

To make it you will need:

hoop with a diameter of 90–95 cm;
durable fabric 3 m long and 1.5 m wide;
lightning - 90–95 cm;
strong cord or rope - 10 m;
metal rings for attaching the structure to the ceiling;
interlining;
scissors;
tape measure;
sewing accessories.

When all the materials are prepared, proceed to the execution of the chair.

Fold the fabric in half and lay it out on a flat surface.
Place the hoop in the center, mark around the circle at a distance of 20-25 cm from it and connect the marks with a line. Cut out 2 circles.
On one of the blanks, make a cut through the center with a length equal to the diameter of the hoop, sew a zipper in this place.
Connect both blanks with a seam around the circumference.
Make cutouts on the finished cover for attaching ropes to a 10 cm long hoop. To do this, fold the cover in half and measure 45 ° C from the fold line in one direction, 30 ° C in the other, put marks.
Duplicate the marks on the second part of the circle. The distance between the cutouts in the front of the chair should be greater than in the back.
Treat the slits with tape.
Wrap the hoop with a strip of synthetic winterizer, to secure it, connect with a seam.
Insert the hoop into the case, fasten the zipper.
Cut the cord into 4 pieces 2.2 and 2.8 m long. Fold each piece in half and fasten to the hoop. To do this, thread a loop through the hole in the cover, and insert the ends of the cord through it and tighten them. Long cords should be in front of the chair, and short cords in the back.
Tie a short and long cord on the right side to one ring, on the left to the other. Make strong knots.
Hang the rings from the ceiling, a beam, or a thick tree branch outside.
Put pillows inside or sew a round mattress. So the chair will become even more comfortable.

Instructions for making a rocking chair from a hoop - video

How to make a wicker nest chair: step by step photos

By making the seat flat and providing the structure with sides, you can get a nest chair. For such a rocking chair you will need:

two hoops made of a metal-plastic pipe with a cross section of 35 mm: for a seat with a diameter of 70 cm, for a backrest - 110 cm;
polyamide cord 4 mm thick - 900 m;
sling or strong rope - 12 m;
a thicker cord to connect the seat and backrest.

To make this chair, you need to be able to weave.

First, braid both hoops:
- wrap the pipe with a cord (it is worth taking a cord with a polypropylene core, as it will help to make a stronger knit);
- pull the thread well (each next turn should fit evenly and tightly against the previous one);
- every 20 turns, fasten the thread, pulling it as much as possible and twisting it;
- For greater strength, coat the weave with glue.
At regular intervals, fasten with a double loop on the braid of the hoop pieces of the cord folded in half. They should take half the length of the hoop.
Weave the bottom of the chair with flat knots in a checkerboard pattern, securing the remaining ends to a free semicircle. The tension of the cords when weaving should be quite strong. It is not scary if the hoop is slightly deformed, in the future the shape will be restored.
Connect the finished seat and back hoop by wrapping them together with a cord in front of the structure.
At the back, connect the seat and the back hoop with two wooden spacer rods, making cuts at their ends for a strong attachment. The length of the spacers is selected in accordance with the desired backrest height.
Attach the cords to the upper arc of the back and weave from top to bottom. Fasten the rest of the cords to the seat and form brushes out of them.
Connect the upper arch of the backrest and the seat with a thick cord parallel to the spacers, and then remove them.
Tie slings to the finished structure. They also need to be made using the macrame technique from cords.
Hang up a chair.

Weaving "chess" with macrame technique - video

How to make an egg chair at home

Chair-egg (cocoon) - the most difficult option for the home master. The design is closed on three sides, and the side surfaces and the back are closed over the head.

For work, you can use metal-plastic pipes, assembling a frame from a hoop and additional arcs. To give additional rigidity, the structure is reinforced with several horizontal arcs, the elements are connected to each other with self-tapping screws.
The finished frame is braided with a cord using macrame technique, sheathed with fabric or crocheted.
For someone who knows how to work with wood, the frame is easy to cut out of thick plywood.

Fabric cocoon baby chair

For children, a cocoon chair can be sewn from fabric. It does not take up much space, organically fit into the interior of the children's room and is not traumatic.

To make it you will need:

2 meters of dense fabric 1.5 m wide;
lightning;
pillow or inflatable balloon;
sewing accessories.

The technique for making a cocoon is simple, the main thing is to follow the instructions.

Instead of a pillow or an inflatable chamber, you can insert a hoop into the bottom of the chair, then you get a drop chair.

How to make a cocoon baby chair - video

Mounting suspended rocking chairs to the ceiling, rack, beam

For any suspended structures, the main thing is reliable fastening. The safety of those who will use the chair depends on it. There are several mounting options:

to the ceiling;
to the stand-leg;
to a tree branch or beam (for the street).

If indoors stretch ceiling, then installing the mount will be problematic. In this case, you need to mount the structure before fixing the ceiling or you should purchase a special stand-leg.

Consider different variants installation.

You can drill a hole in the concrete ceiling, install a powerful anchor with a hook for hanging the structure. On sale there are special sets consisting of an anchor, a hook and a chain. Fasteners must withstand a weight of at least 120 kg.
Voids in the ceiling through the hole must be filled with a special solution of high strength polymers - chemical anchors. Such compounds are sold in tubes for building syringes. Then you need to insert the anchor into the hole and wait a day until the composition is completely dry.
For a ceiling with solid floor beams or for a terrace and a street, bolting is suitable.
For false ceiling it is worth purchasing a special suspension that has a bracket that is attached to the concrete ceiling and exits through the suspension. A hook is attached to it.
The mounting bracket is installed on the concrete ceiling, then the hook is screwed to it
Slings are tied to a tree branch with a strong knot.
The leg stand can be purchased at the store. It is convenient because the chair is not permanently fixed in one place and can be moved, and if necessary, disassembled and transported.

Do-it-yourself rack drawing

The simplest stand-leg for a hanging chair can really be done independently.

The wooden rack consists of only 5 parts, but it cannot be made without special equipment, all parts are bent.
The most common option is a metal rack. To make it you will need metal pipe, pipe bending equipment and welding.
A simple version of a metal rack: the design does not require complex drawings and special skills.
For stability, a simple metal stand is attached to vertical support chain or rope

To fully relax, it is not necessary to spend a lot of money. With a creative approach to business, relaxation will become not only relaxation in a hanging chair, but also the process of its manufacture. And the product will cause legitimate pride.

A rocking chair is a very necessary and comfortable thing that helps to relax while relaxing, or, conversely, to concentrate while working. In the furniture market, you can choose this piece of furniture for different tastes and for different price categories.

But there is a more reliable and less expensive option - to make a rocking chair yourself at home. It is important to carefully calculate and measure all the details, because if the exact balance is not observed, the chair will either not move or tip over on its side.

The main types of rocking chairs

Below are photos of rocking chairs of different types.

An excellent option for a private home would be a massage rocking chair - it will not only give your interior modern style, but also has great functionality!

Look at the photo how the massage rocking chair fits beautifully in the interior:

Armchair on skids

The chair is the most popular among users, that is, it has radius skids. Such a rocking chair is distinguished by its simple design and rather simple assembly technique.

The disadvantage of such a chair is that it will not be possible to swing strongly, as it will simply tip over forward or backward.

Armchair with variable curvature

Armchair with variable curvature eliminates tipping over. It is the most comfortable to use and allows almost any landing height.

Armchair on elliptical runners

The chair on elliptical runners is equipped with bumpers to prevent tipping over.

Multifunctional armchair

The multifunctional chair has another name "3 in one". Such a piece of furniture, if necessary, can be turned into a sunbed, but its dimensions are quite overall, so use is available only in relatively large rooms.

Materials for manufacturing

Usually rocking chairs are made of wood, as the metal is too heavy for such a construction. Most often, beginners assemble a plywood rocking chair without violating the following recommendations:

the plywood of the middle layer should be much thicker than for the edges;
it is necessary to use predominantly waterproof glue, or when using PVA, it is better to fix the parts with small carnations;
all connections are treated with glue, securing them with several self-tapping screws on both sides;
it is reasonable to protect the surfaces on which the entire mass rests with rubber or strong wooden slats in order to avoid plywood chipping from the load.
for more strength finished structure must be treated with a special emulsion or water-based varnish.

Of the tools, an electric jigsaw, a screwdriver, a drill and a hammer are useful.

A forged rocking chair, of course, can only be made by a specialist, since special equipment and premises are required.

Of course, it is possible to make such a chair by welding metal profile pipes that resemble wicker rocking chairs. But this option is more suitable for the garden street area.

Also in the garden you can place a lounger with an awning (like a swing), which is a little more difficult to make, but it will be a lot of fun to use!

For home comfort and comfort, it will be more aesthetic to use wood, decorating it with wicker rattan rods.

A rocking chair for children is also easy to arrange, but its proportions will differ from the adult version. Making it yourself is not at all difficult even for a beginner.

Important steps and rules of work

Before you make a rocking chair with your own hands, you need a competent drawing! Most often, self-taught masters find ready-made drawings of a rocking chair on the Internet, but it is worth considering the mass of the largest person who will use it in order to avoid misunderstandings in the future.

Note!

And then, on occasion, it will be possible to put a pillow on the seat, for greater comfort and avoid sharp rocking.

Beginning masters may not immediately get the ideal option, even if all sizes of the rocking chair are observed. This can easily be corrected by balancing the product.

The rear overhang can be made heavier by simply joining the rear ends of the skids with a stick in a "U" shape. So the rocking chair will be easier to go and "not shove" when swinging.

When tilting the chair back, accordingly, it is necessary to attach the weights to the front overhang.

Required pads for chair rails

On the runners of the rocking chair, it is imperative to install pads that prolong its durability and make the furniture wear-resistant.

you need to turn the chair upside down;
bar the right sizes heat up quite strongly with a special hairdryer;
then gently press the hot blank to the skid and wrap it with a dense braid;
we repeat a similar action with an adjacent skid;
after waiting for the final cooling of the blanks, we glue them with waterproof glue;
we fix the lining with small carnations along the entire length;
after a maximum of three days, when the glue is completely dry, temporary fasteners can be removed. Then finally fix the ends with self-tapping screws;
the heads of the self-tapping screws must be carefully rubbed with a putty prepared from sawdust of the same material (wood), mixing them with glue.

Note!

DIY rocking chair photo

(18 ratings, average: 4,33 out of 5)

Private household plot is best place for rest and work. In order to have a good rest in nature, mankind has come up with many types of different devices, for example, a swing or a hammock. The best comfortable piece of furniture can be considered a chair. But one addition can be made to its design that will make it more convenient. Such a model helps to relax all the muscles of the body, and slow and monotonous rocking encourages long reflections.

The design of the rocking chair has gained immense popularity in the world. That is why, since its invention, many rocking chair options. Masters say that making a chair with your own hands is quite simple.

What rocking chairs exist for giving

To make a universal model of a rocking chair for a summer residence, a willow vine will be needed. Unique and simple design It will look great against the backdrop of a variety of greenery and go well with the decor of a gazebo or country house. The main disadvantage of such a durable and lightweight piece of furniture can be considered the fear of a large amount of moisture.

Rattan is a very flexible liana. which grows in Asian countries. This plant is also used to weave unique and beautiful rocking chairs. Their beauty is not inferior to willow products, but the strength is much worse. Fastening materials made of metal are not used in the manufacture of rattan furniture. It is customary to make connections only with the help of high-quality knitting and glue for wood.

When it comes to the durability and high strength of a rocking chair, models made of metal parts are the best example. A unique lace chair is able to decorate absolutely any suburban area. Rocking chairs should be used not only as furniture for a country house. The main advantage of the product for office work considered to be its solidity and representativeness. Now there are models of rocking chairs from famous designers, which are made in various modern styles.

Many modern designs of these pieces of furniture have special uniqueness. Together with conventional models rocking chairs, they can guarantee their owner great comfort and independence from conventional energy sources. A similar piece of furniture, which is equipped with small solar panels, makes it possible to spend your free time with benefit and comfort.

How to make a rocking chair with your own hands

The armchair in its design has much in common with the sofa. When a lot of pillows are placed on such a piece of furniture or a blanket is thrown over it, it is impossible to find anything better for relaxing in country house. Next, the process of assembling a rocking chair from plywood with your own hands will be described in detail.

DIY rocking chair tools

Making a unique rocking chair is quite simple. By purchasing good materials and having the right tools, you can assemble this piece of furniture yourself in a small amount of time. To assemble a rocking chair you will need the following tools:

Good organization of the assembly process assumes that absolutely everything necessary tools will be located near the workplace.

DIY rocking chair: drawings

Every responsible work must begin with detailed drawing, which is needed in order not to make a mistake in the required amount building materials. And also a high-quality drawing can be easily found on the net. On a special metric grid with a step of no more than 10 centimeters, there is a template for the side parts of the rocking chair. The best option there will be a transfer of the drawing to a large sheet of paper and the manufacture of a pattern, with which it will be convenient to transfer the outline of the product to plywood.

In this work, small inaccuracies can be tolerated. But all sidewalls must necessarily be the same. There should be no protruding corners on the lower rolling side of the rocking chair.

Making blanks for a rocking chair made of wood

To make special tsargovy screeds and sidewalls, plywood of the highest class with a thickness of at least 3 centimeters will be needed. Side elements should be cut out electric jigsaw according to the pattern. Three tsars should have a size of 810 by 125 millimeters.

Next, it is worth cutting blanks from wooden bars, which in the future will make up the surface of the back and seat of a unique chair. For this purpose, a wooden beam with dimensions of 50 by 25 millimeters is well suited. From it you need to cut 36 blanks of 1250 millimeters. Before buying the material you need for work, you should find out what is the standard length wooden beam at your nearest hardware store.

The total length of the beam, which is needed for the manufacture of the product, is quite simply calculated on the calculator. It is necessary to observe the multiplicity so that when cutting the workpieces, a small amount of the remaining material remains. In this case optimal solution there will be a decrease in the size of the rocking chair. For example, if the standard length of a wooden beam is 2.5 meters, then one workpiece will be 1240 millimeters, because it is necessary to subtract the thickness of the cut and further processing.

With fasteners, everything is much easier. For the manufacture of wooden chair rocking chairs will be needed:

14 special confirmations measuring 5 by 125 millimeters;
150 wood screws 4 x 50 mm.

Thus, preparatory stage can be considered completed. However, it will still be necessary to work hard to make a unique rocking chair. Additionally, you may need the following materials:

high-quality drying oil;
varnish for wood;
liquid putty;
antiseptic against a variety of pests.

Processing the details of the future rocking chair

Next, you can start sanding the manufactured elements of the chair and removing small chamfers from them. When the grinder has great power and there is experience with it, then such a process does not take much time. Considering that the furniture will often be on outdoors, costs pay great attention to the ends of the parts to ensure their protection from moisture, which will constantly affect them.

All ends of the blanks must be well saturated with hot drying oil, and the longitudinal fibers of the wood on them should be slightly flattened with a hammer. Thus, moisture will not cause much harm to the rocking chair. This procedure for the ends of the product must be carried out several times.

Assembling a homemade chair

This type of country furniture does not have certain standards and assembly rules. Special holes for the drawers should be marked so that it is convenient to assemble the rocking chair. The main elements of a comfortable chair are:

headboard;
outer arc;
sidewalls;
foot.

Special drawers fastened to the sidewalls with euro screws. To do this job, you need to make high-quality markings on the sidewalls, and then combine the two sidewalls. Further, in their planes it is worth drilling a through hole with a wood drill with a diameter of 8 millimeters. To make holes in the end of the tsarg, it is necessary to use a wood drill with a diameter of 6 millimeters. Now you need to pull the frame of the product with the help of confirmations.

Next, you need to make holes in the wooden blocks that will form the back and seat of the rocking chair. There should be 35 blanks. It is necessary to make 4 through holes in each bar. As a result, it should get 140 identical holes. To simplify this work, it is worth using a special conductor. This is the name of the marking device. a large number identical products.

Making it is pretty easy. A small piece of wooden beam is taken, but not less than 300 millimeters long. It needs to be drilled through holes for a template, the diameter of which must correspond to the size of a construction pencil for marking. From the end and side of such a device, you need to nail small pieces of plywood, which will act as a limiter. This will prevent you from making mistakes when marking holes.

Such a conductor can be used to mark through holes, but it is absolutely impossible to drill through it, since the template holes will be broken with a drill and the workpieces will have to be re-marked. However, you can use a 4 x 35 mm wood drill with a countersink. In this case, it is possible to make a through hole of the size you need in the marked part.

Between wooden blocks must be a gap at least 17 millimeters. To avoid distortions, it is necessary to mark on the sidewalls of the product a distance corresponding to 6 bars together with the necessary intervals, and additionally check the matching of the templates in size. When they completely match, then you can continue to assemble the rocking chair. If the sizes do not match, it is worth making adjustments to the blanks. A modern self-tapping screw for wood fixes euro plywood well. However, if we take into account the fact that the fastening frequency is very large, then it is necessary to use a wood drill with a diameter of 3 mm.

Rocking chair finishing

It is necessary to carefully putty holes from self-tapping screws. Further, it is necessary to treat the product with a special antiseptic and cover it several times with waterproof varnish. This work should be done very carefully and carefully. After thorough drying of the rocking chair, you can begin to use it.

How to make a metal rocking chair yourself: drawings

Metal is pretty difficult to process material. When there is no experience in forging or specific equipment for the production of bent products, then for self assembly only simple rocking chairs will be available. However, their design can be quite interesting. First from metal corner or profile is going to the frame of the product.

Next, all blanks must be processed anti-corrosion composition. Hammer paints are very popular now. The decoration decor depends on the preferences of the master. For example, the seat can be made of wooden planks or covered with a soft cloth. To decorate a rocking chair, it is worth making small pillows for the back and seat, and on top cover everything with a large removable cover. Sometimes a metal frame is braided big amount willow vine. For this work, theoretical skills in wicker weaving will be required, which are worth learning from the numerous videos on the net.

The armchair is a comfortable and popular piece of furniture used both at home and at work, and for relaxation, such as a rocking chair. We will consider its features and the ability to make such furniture with our own hands today in the article.

Types of chairs

The main varieties of this comfortable furniture:

homemade- designed for relaxation (reading, afternoon rest), in addition, they serve as a stylish addition to the interior;
country garden- serve as furniture for communication and relaxation after a hard week, work in the garden or garden;
office chairs- help to have a rest in small breaks between work to the personnel and supervising workers.

According to the type of design, rocking chairs can be divided as follows:

with radius skids- the very first species created by mankind has a large swing amplitude and can roll over;
with skids of variable curvature- stable, do not tip over;
elliptical skids- often equipped with a footboard, springs, chippers, have a soft "move";
tumbler- the simplest option, often used on summer cottages, skids are also a seat;
glider- modern design, which swings with the help of a pendulum mechanism.

In principle, the purpose of the rocking chair is the same - rest and relaxation under measured rocking. Armchairs with arched runners or gliders are very much appreciated by pregnant women and nursing mothers. Measured swaying calms the nerves, relieves tension and fatigue, the baby behaves calmly during feeding, falls asleep better.

In general, such furniture is very conducive to sleep: if you are tormented by insomnia, then a few minutes of rocking with a cup of warm milk or herbal tea will correct the situation. Swinging in one rhythm has a positive effect on the parasympathetic nervous system, and the shape of the curved backs relaxes the spine, relieving tension from it, such an effect on the autonomic system of the body is also beneficial.

Why does the chair rock?

The center of gravity of such furniture is shifted from the seat to the angle between the seat and the back. The legs are two strips in the form of an arc, which allow you to swing without much effort on the part of a seated person. The amplitude of the swing depends on the length of the legs-runners: the longer, the stronger the angle of inclination of the chair, up to the “reclining” position. Short runners give a small swing for measured, power swinging.

Did you know? The first chairs made by man were throne furniture for the supreme rulers. This piece of furniture was made from expensive material, could be inlaid precious stones, gold, ivory. According to archaeologists, the back of the throne of Tutankhamun was almost completely buried in gold trim.

Materials that are suitable for building a rocking chair

List of materials - basic and for individual furniture parts:

tree- high-quality wood has a corresponding price, but the furniture always turns out to be stylish, durable and comfortable. The processing of such raw materials requires minimal knowledge of carpentry, in addition, you need to choose the right materials for final processing, which will protect the tree from external influences;
plywood- for an amateur this is the most comfortable material, it is easy to process, the main thing is to think over the reliable fixation of parts. The disadvantage of the material is that it is not suitable for the street;
vine or rattan- a great option for furniture, but weaving needs to be learned, and the material is difficult to get, you also need to know the processing rules;
metal- working with it requires both skills and special tools, but with proper processing it is a strong and durable material that is not afraid of weather conditions;
profile pipes more suitable for the manufacture of parts than the whole structure, they are strong and durable, but require skill;
plastic pipes- Also a good option without special skills. Cheap, light, easy-to-work material, not afraid of weather tests.

Did you know? There is still a lot of controversy about the origin and authorship of the invention of the rocking chair. It is indisputable that the introduction of English dictionary in 1787, the new phrase "rocking chair", literally - "rocking chair".

Definition with chair type

Wicker furniture looks stylish, beautiful, it is comfortable and light, but not all models fit into the urban interior. This option is ideal for giving. The armchair can be placed on a veranda or terrace, it is easy to move it into the house (for example, for the winter), ensembles with tables and small footstools look especially good.

Another great country option is metal products, where the frame is metal, and the seat and back are made of wood.

Important!In residential conditions, metal skids can cause significant damage to the floor finish.

A good option is a folding rocking chair made of wood, which can be easily removed from the street into the house. Sofa-type models with a wide transverse part deserve special attention. Just a godsend for giving - an option with a canopy: the product can be placed in the garden and relax in its shade.

A light model made of plywood of the “roly-poly” type can be located not only on the terrace, but also in the garden.

Plastic products do not have to look cheap - they can be stylish items with interesting design. Plus products in price, strength (not afraid of pests or weather conditions), light weight. The products are also suitable for modern interiors apartments.

Models for an apartment or house, first of all, should fit into the overall appearance of the interior, be easy to move, if possible, do not take up much space if the room is small. Ideal in all respects will be a model made of bent plywood: the product is not expensive, compact, it can be decorated with covers and pillows from any material, plywood can be painted in any desired color.

Lungs wooden models they will also go well with any type of furniture, a PVC strip is usually attached to the runners of such products to protect the parquet or other coating from dents or scratches. There are many models that have additional equipment: pouf or footstool.

A great option for a house or apartment is a glider: having no skis, but only a pendulum mechanism, the model will not cause damage to floor coverings.

A low chair with short legs and soft pillows is suitable for a nursery and will become a favorite resting place for a child. By the way, there are electronic products for the little ones on sale - a good help for mom when going to bed.

Luxurious openwork weaving from a wicker or rattan, depending on the type of model, can advantageously emphasize the design in different styles- "Provence", ethnic, classical, Victorian. These are durable and lightweight products, besides natural, which is important during operation.

An example of building a simple rocking chair

The simplest model is on two sidewalls with crossbars. The sidewalls will be made in the form of a boomerang, 14 crossbars are attached to them with a distance of 4 centimeters between them, supports made of timber will support the crossbars.

The main material is plywood 1.5 cm thick, in addition to it you will need:

self-tapping screws;
jigsaw;
drill or screwdriver;
simple pencil;
roulette;
cardboard for patterns;
sandpaper;
wood glue.

The sequence of actions is as follows:

Paint the finished model with any composition of your choice (stain, paint). The back side of the frame can be upholstered with leatherette, and a mattress made of the same material can be sewn on the seat and backrest. Upholstery options and models may be different, depending on your preferences and the purpose of the furniture.

Example of making a real rocking chair

Without knowledge of woodworking, however, it is possible to make a simple product with parts that do not have curved lines, with the exception of skis.

For work you will need:

wooden board 3000/200/40 mm for skis, for the main structure board with dimensions 3000/100/20 mm;
graph paper;
pencil;
roulette;
electric jigsaw with saws for wood;
screwdriver;
confirmants;
grinder.

Further work consists of the following stages:

Converting an ordinary chair into a rocking chair

Surely in every household there is old chair, which has nowhere to put. new life it can be given by converting it into a rocking chair. At the same time, if the chair is upholstered, you can change it to a fabric with a more modern pattern.

Important! The chair needs to be prepared, namely, to file the hind legs a little, thereby shifting the center of gravity. You need to file with ready-made skids to avoid mistakes.

For work you will need:

chair;
electric jigsaw with a saw for wood;
board for skids 4 cm thick;
sandpaper or grinder;
cardboard for patterns;
pencil;
ruler;
screwdriver;
bolts.

Further sequence of actions:

It is, in principle, not difficult to make a product on your own with a minimum of knowledge. Difficulty may arise when working on arcs for skids, so at the end of the article we bring to your attention a video instruction for making wood skids.

Video: how to make a rocking chair

A rocking chair is the most comfortable piece of furniture that is designed for home relaxation. Such a product is expensive, and not everyone can afford to buy it. In order not to spend money on the purchase of a product, you can design and make a rocking chair with your own hands. A beautiful and original self-assembly product will become a central decoration in your home interior.

How to design correctly

There are several types of rocking chairs that suit different needs and habits of users. The first models that appeared in everyday life were equipped with simple arcs and skis. Do-it-yourself rocking chairs can be made according to the finished drawing. But you need to know that these drawings were created for an individual person and may not suit others. First of all, the product should be comfortable and meet your own needs.

If the family consists of 3-4 people, then the design of the chair is designed for the heaviest and tallest member of the family.

What you need to know when designing a product:

In the manufacture of the chair, it is required to take into account that the center of gravity of the rocking chair must be correctly located in relation to the center of the rocking circle. Then the product will be comfortable and stable.
A rocking chair made of wood will not move if these two points converge at one.
The product will be unstable if the center of gravity moves higher in relation to the center of the circle.

How to choose material and design

The material for the chair is chosen depending on the interior of the room in which it will stand, and financial capabilities. Design and choice of material:

Wicker products, have a beautiful appearance and are the most popular models. They are expensive, because they are woven by hand from rattan and cane. Models made from Indonesian rattan are very durable and have good quality. These are elegant, comfortable and environmentally friendly products. Thanks to good depreciation, they are able to withstand any weight. They are often installed on balconies and loggias of a country house.
The frame for rocking chairs is made of profile pipe, metal or wood. Plywood is often used. Metal carcass combined with natural materials such as rattan. These products are highly durable and can withstand big weight. To make them comfortable to sit on, the back and seat are made of plastic pipes.
The most budgetary are products made from wood. They are less durable, but have a beautiful appearance. A classic armchair made of wood with your own hands will look incomparable in a living room with a fireplace.

The comfort and smoothness of the rocking of the chair depends on the runners (skis). They can be made in two ways:

According to the drawing, 2 blanks are cut out of plywood and polished. The thickness of the plywood must be at least 15 mm. Skis must be installed in the grooves symmetrically with respect to each other. To do this, grooves are made in the legs of the product. Their depth should be from 7 to 10 cm. In the place where the legs of the chair and skis adjoin each other, through holes are cut through. A wooden spike is inserted into them, having previously lubricated the holes with glue.
For the manufacture of skis, 2 square bars 1 m long and 45 mm thick are used. It cuts the grooves into which the legs of the chair will be inserted. To give the runners the necessary shape, the bars are soaked in hot water. When they soften, the material will become elastic and slightly arched. When the skis are dry, they are installed on the legs. The parts are fixed with glue, so all joints are pre-lubricated with a substance.

What do you do with old furniture?