Vertical swivel. Vertical swivel base. The main dimensions of the rotary table tk13200l, tk13250l, tk13315k
HORIZONTAL TURNING TABLES TS (160-1250 mm).
TS 160A |
TS 200A |
TS 250A |
TS 320A |
TS 400A |
TS 500A |
TS 630A |
TS 800A |
TS 1000A |
TS 1250A |
|
Faceplate diameter, mm | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø500 | Ø630 | Ø800 | Ø1000 | Ø1250 |
KM2 | KM3 | KM4 | KM5 | KM6 | - | |||||
Hole diameter, mm | Ø25х6 | Ø30х6 | Ø40х10 | Ø50х12 | Ø75х14 | |||||
T-slot width, mm | 10 | 12 | 14 | 18 | 22 | |||||
T-slot convergence angles | 90° | 60° | 45° | |||||||
Fastening slot width, mm | 12 | 14 | 18 | — | — | — | — | - | ||
1.5 | 1.75 | 2 | 2.5 | 3.5 | 4.5 | 5.5 | 5 | |||
1:90 | 1:120 | 1:180 | ||||||||
graduation | 360° | |||||||||
Rotation of the table with one rotation of the worm | 4° (1" division) | 3° (1" division) | 2° | |||||||
Minimum scale value | 10 " | |||||||||
Reading accuracy | 80" | 60" | 30" | |||||||
100 | 150 | 200 | 250 | 300 | 550 | 700 | 1250 | 2000 | 3000 | |
Weight, kg | 16.5 | 22.5 | 33.5 | 65 | 125 | 215 | 345 | 800 | 1300 | 1900 |
Price, rub. |
17 100 |
19 100 | 21 200 | 32 400 | 49 100 | 105 700 | 234 300 | 592 300 | 938 500 |
1572 000 |
DIMENSIONS OF TURNING TABLES TS:
TS160A | TS200A | TS250A | TS320A | TS400A | TS500A | TS630A | TS800A | TS1000A | TS1250A | |
A | 260 | 290 | 330 | 410 | 530 | 640 | 820 | 1000 | 1170 | 1400 |
B | 196 | 236 | 286 | 360 | 450 | 560 | 700 | 890 | 1080 | 1300 |
C | 332 | 369 | 422 | 493 | 612 | 753 | 898 | 1080 | 1295 | 1420 |
D | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø500 | Ø630 | Ø800 | Ø1000 | Ø1250 |
G | 12 | 14 | 18 | 22 | 22 | - | 22 | |||
H | 75 | 80 | 90 | 110 | 140 | 158.5 | 160 | 215 | 250 | 283 |
J | 12 | 14 | 18 | 22 | 30 | - | 30 | |||
K | 76 | 91.25 | 102.5 | 128.5 | 180 | 230 | 295 | 364 | 364 | 487.5 |
L | 194 | 211 | 241 | 273 | 337 | 393 | 468 | 535 | 654 | 690 |
M | KM2 | KM3 | KM4 | KM5 | KM6 | - | ||||
P | 27 | 27 | 30.5 | 44 | 60 | 65 | 68 | 76 | 106 | 116 |
Q | 125 | 160 | 180 | 220 | 250 | |||||
d | Ø25 | Ø30 | Ø40 | Ø50 | Ø75 | |||||
h | 6 | 10 | 12 | 14 |
Rotary tables and accessories (made in Russia).
5030 | 5053 | ||||
5030 | |
||||
5040 | 5055 | |
|||
5045 | 5057 | ||||
5050 | |
5059 | |||
6130 | |||||
5120 | |||||
HORIZONTAL TURNING TABLES TS (1600-2500 mm).
TECHNICAL CHARACTERISTICS OF THE HORIZONTAL TURN TABLES TS:
TS1600A | TS2000A | TS2500A | |
Faceplate diameter, mm | 1600 | 2000 | 2500 |
Diameter through hole, mm | 100 | 120 | - |
Centering hole diameter and depth, mm | 120x25 | 150x30 | - |
T-slot width, mm | 22 | ||
Convergence angles of T-slots, deg. | 22,5 | ||
Worm and worm gear modules | 8 | ||
Worm gear ratio | 1:120 | 1:180 | |
Graduation of the whole table, deg. | 360 | ||
Rotation of the table with one rotation of the worm, deg. | 3 | 2 | |
Minimum scale value, min. | 10 | ||
Indication accuracy, min. | 30 | ||
Maximum workpiece weight, kg | 5500 | 8500 | 10000 |
PRICES for rotary tables TS (1600-2500), rub. | 2 777 000 | 4 090 000 | 4 123 000 |
TURNING TABLES HORIZONTAL-VERTICAL TSL (100 - 800 mm).
TSL
- TYPE 5057. WZK tailstock.
TECHNICAL CHARACTERISTICS OF TURNING TABLES HORIZONTAL-VERTICAL TSL:
TSL100 | TSL160 | TSL200 | TSL250 | TSL320 | TSL400 | TSL800 | |
Faceplate diameter, mm | Ø100 | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø800 |
Taper of centering hole | KM2 | KM3 | KM4 | KM6 | |||
Hole diameter, mm | Ø20х8 | Ø25х6 | Ø30х6 | Ø40х10 | Ø75x14 | ||
70 | 125 | 150 | 170 | 210 | 260 | 500 | |
T-slot width, mm | 6 | 10 | 12 | 14 | 22 | ||
Toe angles of T-slots | 90° | 60° | 45° | ||||
Fastening slot width, mm | 10 | 12 | 14 | 18 | 22 | ||
Worm gear modules | 1 | 1.5 | 1.75 | 2 | 2.5 | 3.5 | 5.5 |
Worm gear ratio | 1:72 | 1:90 | 1:120 | ||||
graduation | 360° | ||||||
Handwheel scale | 2" | 1" | |||||
Minimum scale value | 10" | ||||||
Reading accuracy | 120" | 80" | 60" | ||||
20 | 100 | 150 | 200 | 250 | 300 | 1500 | |
10 | 50 | 75 | 100 | 125 | 150 | 750 | |
Weight, kg | 7 | 23 | 31.5 | 46 | 77 | 150 | 1150 |
PRICE for rotary tables TSL, rub. | 19 100 | 22 000 | 23 700 | 27 000 | 42 500 | 62 500 | 710 000 |
TURNING TABLES HORIZONTAL-VERTICAL T13 500B, Ø500 mm.
Rotary tables horizontal-vertical series T13 designed for dividing, circular cutting, setting angles, boring, local processing and similar work in conjunction with milling machines. This type of table is specifically designed to perform machine operations with more measuring capabilities than TS series tables. The base allows the use of tables in a vertical position for work using the tailstock.
OPTIONAL (not included) the table can be completed with:
- TYPE 5055. FL flange for fastening the scroll chuck.
- TYPE 5054. DK11 spiral chuck.
- TYPE 5053. DP dividing disc that allows the operator to precisely divide a circle with 360° rotation, in any proportion and at any angle.
TECHNICAL CHARACTERISTICS OF THE T13500B HORIZONTAL-VERTICAL TURNING TABLES:
T13500B | |
Faceplate diameter, mm | Ø500 |
Taper of centering hole | KM4 |
Hole diameter, mm | Ø50х15 |
Center height in vertical position, mm | 286 |
T-slot width, mm | 20 |
T-slot convergence angles | 45° |
Worm gear modules | 3.5 |
Worm gear ratio | 1:90 |
graduation | 360° |
Turning the table for one revolution of the worm | 4° |
Minimum scale value | 10" |
Reading accuracy | 60" |
Max. bearing load in horizontal position, kg | 550 |
Max. bearing load in vertical position, kg | 275 |
NET / GROSS weight, kg | 225 / 260 |
Package size, mm | 955x690x337 |
PRICE for table T13500B, rub. | 130 200 |
DIMENSIONS OF TURNING TABLES HORIZONTAL-VERTICAL T1350B:
TURNING TABLES TSK (160 - 400 mm).
Tilting rotary tables series TSK designed for dividing, circular cutting, setting angles, boring, local processing and similar work in conjunction with milling machines. This type of table is specifically designed for machine operations with more measuring capabilities than TS or TSL series tables. The base allows the use of tables in a vertical position for work using the tailstock.
OPTIONAL (not included) the table can be completed with:
- TYPE 5055. FL flange for fastening the scroll chuck.
- TYPE 5054. K11 spiral chuck.
- TYPE 5053. DP dividing device that allows the operator to accurately divide the disc during 360° rotation, in any proportion and at any angle.
TECHNICAL CHARACTERISTICS OF TSK TURNTABLE TABLES:
TSK160 | TSK200 | TSK250 | TSK320 | TSK400 | |
Faceplate diameter, mm | Ø 160 | Ø 200 | Ø 250 | Ø 320 | Ø 400 |
Taper of centering hole | KM2 | KM3 | KM4 | ||
Hole diameter, mm | Ø 25x6 | Ø 30x6 | Ø 40x10 | ||
T-slot width, mm | 10 | 12 | 14 | ||
Worm gear modules | 1.5 | 1.75 | 2 | 2.5 | 3.5 |
Fastening slot width, mm | 12 | 14 | 18 | ||
Toe angles of T-slots | 90° | 60° | |||
Worm gear ratio | 1:90 | ||||
graduation | 360° | ||||
Tilt angle | 0 - 90° | ||||
Handwheel scale | 1" | ||||
Minimum scale value | 10" | ||||
Reading accuracy | 2" | ||||
Max. bearing load in horizontal position, kg | 100 | 150 | 200 | 250 | 300 |
Max. bearing load in vertical position, kg | 50 | 75 | 100 | 125 | 150 |
Weight, kg | 36 | 57 | 80 | 135 | 280 |
PRICE for rotary table TSK, rub. | 52 000 | 56 400 | 65 100 | 88 300 | 131 000 |
DIVIDING DISCS DP for tables TS, TSL, TSK.
Disk Applications:
Applicability |
Disks |
||
5 100 | |||
TS160A, TS200A, TS250A, TS320A |
|
6 600 |
|
TS400A |
A: 34, 37, 38, 39, 41, 43, 44, 50, 52, 56, 61 |
9 800 |
|
TS500A, TS630A, TS800A, TS1000A |
A: 33, 34, 37, 38, 39, 41, 43, 44, 50, 52, 56, 61 |
14 800 |
CHUCKS PS3 for fixing on rotary tables.
The chucks are equipped with straight and reverse hardened jaws, a key and bolts for fastening.
Adapter flanges TYPE 5055 FL are required for installation on tables.
Designation |
D, |
D1, |
D2, |
D3, |
h, |
h1, |
h, |
Max. diam. |
Mmax. allowable |
Weight, |
||
DK11-80(PS3-80) |
6 900 |
|||||||||||
DK11-100 ( PS3-100) |
||||||||||||
DK11-125(PS3-125) |
7 560 |
|||||||||||
DK11-160(PS3-160) |
11 400 |
|||||||||||
DK11-200(PS3-200) |
17 800 |
|||||||||||
DK11-250(PS3-250) |
21 200 |
|||||||||||
DK11-315(PS3-315) |
40 600 |
|||||||||||
DK11-400 (PS3-400) |
58 200 |
FLANGES FOR MOUNTING CHUCKS FL on rotary tables TS, TSL, TSK.
Correspondence of the diameter of the chucks to turning flanges:
Flange |
|||||||
Faceplate diameter, mm |
|||||||
ammo |
DK11-80 |
DK11-125 |
DK11-160 |
DK11-200 |
DK11-250 |
DK11-315 |
DK11-400 |
Chuck diameter, mm |
|||||||
1 900 |
3 100 | 3 400 | 5 100 | 9 100 | 10 200 | 12 100 |
ADJUSTABLE REAR STOCK WZK.
Headstock rear adjustable WZK designed for use with vertical rotary tables. They are used to hold and center cylindrical and other workpieces in machining. The height of the center location and the angle of inclination can be changed and adjusted as needed. The design allows the center to be pulled inward to perform a part change and repeat the operation. For safe operation, the center is fixed with a clamping handle.
TECHNICAL DATA OF WZK TAILS:
Applicability |
||||||
Height from base MIN |
||||||
Center cone |
||||||
Fastening slot width, mm |
||||||
Angle of inclination of the center, hail. |
||||||
Center displacement, mm |
||||||
Dimensions, mm |
||||||
6 500 |
6 900 |
7 600 |
Designation |
||||||||||||||||
REAR STOCK UNDER ADJUSTABLE WZ and TSL400.
Headstock back WZ and TSL400-2 designed for use with vertical rotary tables. They are used to hold and center cylindrical and other workpieces in machining. The design allows the center to be pulled inward to perform a part change and repeat the operation. For safe operation, the center is fixed with a clamping handle.
SPECIFICATIONS FOR WZ TAILS:
TABLE LONGITUDINAL AND TRANSVERSE MG-2A with a swivel base.
Table longitudinally transverse with a swivel base MG-2A is a multifunctional accessory for a wide range of applications, mainly on milling, drilling and other machines. The use of longitudinal and transverse movement in conjunction with rotation around the base allows you to facilitate and speed up the processing of parts.
l
TECHNICAL CHARACTERISTICS OF THE TABLE WITH TURNING BASE MG 2A:
MG-2A |
|
Table size, mm |
|
The value of the longitudinal movement of the table, mm |
|
Value transverse movement table, mm |
|
T-slot width, mm |
|
Distance between T-slot, mm |
|
Minimum reading value of the limb |
|
The maximum allowable weight of the workpiece relative to the center of the table, kg |
|
The maximum allowable force relative to the center of the table, N |
|
Deviation of the surface along the length of the table, mm |
|
Permissible deviation of perpendicularity, mm |
|
Parallelism of the table surface to the base surface, mm |
|
Permissible deviation when turning the table 0-360°, mm |
|
NET weight, kg |
|
GROSS weight, kg |
|
Packing dimensions, mm |
|
40 100 |
TURNING TABLES HORIZONTAL-VERTICAL TK13EL, with CNC.
Horizontal-vertical tables with a through hole in the spindle of the series TK13EL CNC perfect solution to apply them to CNC milling machines and machining centers. They are used in combination with the machine's CNC controller or with an independent controller on non-CNC machines. To ensure work with wide application, a faceplate with a through hole is used, as well as other devices that allow you to fix the part between the table and the tailstock. With their help, operations can be performed particularly accurately. The presence of a through hole in the spindle allows the use of hydraulic (pneumatic) mechanized collets and chucks when processing long shafts and other products.
TECHNICAL CHARACTERISTICS OF THE TABLE TK13EL, CNC:
TK13200EL |
TK13250EL |
TK13315EL |
|
Faceplate diameter, mm |
|||
Center height, mm |
|||
Borehole diameter, mm |
|||
Width of the fixing groove-key, mm |
|||
Width of the fixing groove T, mm |
|||
Gear ratio of the worm pair |
|||
Gear ratio |
|||
Maximum rotation speed, rpm |
|||
Table rotation angle per pulse |
|||
Servo drive power, kW |
|||
Servo torque, Nm |
|||
Division accuracy |
|||
Positioning stability |
|||
Clamping force at oil pressure 15x10 5 Pa, Nm |
|||
Locking force at air pressure 5x10 5 Pa, Nm |
|||
Max. workpiece weight in horizontal position, kg |
|||
Max. workpiece weight in vertical position, kg |
|||
Maximum torque, Nm |
|||
NET weight, kg |
MAIN DIMENSIONS OF THE ROTARY TABLE TK13200L, TK13250L, TK13315K:
TK13200EL |
||||||||||||||
TK13250EL |
||||||||||||||
TK13315EL |
TK13200EL |
|||||||||||
TK13250EL |
|||||||||||
TK13315EL |
Characteristics:
Model | Price, rub | Volume(l) | G/P (kg) | Dimensions (mm) |
BP-1.0 | 50050,00 | 1 000 | 2 500 | 3100x1560x900 |
BP-1.6 | 58702,00 | 1 600 | 4 000 | 3700x1560x900 |
BP-2.0 | 66066,00 | 2 000 | 5 000 | 3700x1850x1100 |
Concrete bucket vertical swivel BP:
Bucket for concrete vertical swivel BP is used to supply concrete with a jib or tower crane to a great height. It is also used to supply concrete directly from the mixer.
The main features of the buckets are the low cost of work, versatility and ease of use.
The main difference from vertical buckets is that the swivel bucket has two positions.
When loading, when the bucket is located horizontally, the process of transferring concrete from the mixer to the bucket is greatly simplified ( bucket for concrete).
At the same time, there is no need to organize a pit or overpass for supplying the tub to the mixer, unlike a conventional vertical tub.
When supplying concrete, concrete bucket swivel accepts vertical position, which makes it possible to significantly simplify transportation by reducing the dimensions in width. The bucket is moved using a jib or tower crane, which allows you to save a lot on renting a concrete pump or concrete jib.
The swivel bucket for concrete supply is optimal solution for construction sites where it is advisable to use inexpensive equipment for concrete supply, which is operated by personnel who do not have special skills and approvals.
Bucket for concrete vertical swivel BP filled with concrete from a mixer, manually or from a mobile concrete plant. After filling the container of the tub, with the help of a jib or tower crane, the tub is fed to the floor, to the place of work. A convenient mechanism allows you to accurately dose the supply of concrete, preventing overspending and loss of concrete during work.
Bucket for concrete vertical swivel BP allows to perform monolithic work with the help of personnel who do not have special training. An introductory briefing is enough to start work, in contrast to the use of high-tech and expensive mechanization tools, such as a concrete pump truck.
When using buckets for concrete, the consumption of concrete for losses during transportation is significantly reduced. Bucket for concrete vertical swivel BP does not require special care after work, simply rinse the equipment with water.
Please note that this website is for informational purposes only and under no circumstances are the information materials and prices posted on the website a public offer determined by the provisions of Articles 435 and 437 of the Civil Code of the Russian Federation.
Check the cost, availability of goods and information about possible discounts with our managers by phone call to the numbers or e-mail addresses indicated in the contact information.
- this is part of the equipment for drilling and milling machine designed to expand the functionality of the equipment. With the help of a rotary table, without reinstallation, it is possible to process parts located in a circle, rotate the workpiece in various coordinates and perform other operations.
Scope and benefits
Rotary tables are widely used on machine tools for various purposes - both on automatic lines in the mass production of parts, and on separate installations. These are milling, vertical drilling machines, forging hammers, presses and other equipment where it is necessary to ensure the rapid movement of the workpiece relative to the working body. Rotary tables are also used in welding operations to perform relief and spot welding.
The main advantage of the rotary table is the ability to process parts in different planes. So, for milling machines, in addition to moving the workpiece in three main directions (longitudinal, transverse and vertical), the turntable can ensure the rotation of the workpiece in the vertical and horizontal planes. The table provides movement of the workpiece in various coordinates, fixing it at the required angle of inclination and performing high-precision processing.
The use of a rotary table can significantly reduce the time spent on processing, increase labor productivity. When performing welding operations this species tooling allows you to install the part outside the work area, thereby not interrupting the production cycle. The functionality of the equipment is also significantly increased.
Types of rotary tables
Rotary tables for metal-cutting machines and other equipment are classified depending on the possible direction of movement. There are five main types of tables:
Rotary tables are available in standard sizes. Main diameters: 320, 400, 500 and 630 mm.
Turntable design
The figure above shows the simplest version of the turntable design. A sleeve (10) is pressed into the table body (11). The spindle (2) rotates in it. The table faceplate (1) is mounted on the spindle. The sleeve (7) is also pressed into the body. A rack-type latch (5) is directed into it, which enters under the action of a spring (6) into the sleeve (3).
A handle (4) is provided to control the latch. The faceplate is rotated by means of a rolling bearing consisting of a cage (12), rings (14) and balls (13). A nut (8) and a locking screw (9) are used to adjust the axial clearance.
GOSTs
Are common specifications Rotary tables with manual and mechanized drives are regulated by GOST 16935-93.
Conducting electrical or information networks can be carried out different ways at the discretion of the user, but it is best to use special mounting tools. The company provides the user with special mounting trays with a lid that can accommodate a large number of conductors in their design. This design provides not only concealed installation power lines, but also protects them from external impact. These structures can be used anywhere, from industrial areas of use to domestic and public buildings.
Installation of cable trays occurs on the surface, and any user is faced with the question of how to overcome turns and various angles premises. In a public and industrial building, the corners of the premises are mostly straight and make up 90 °. In this regard, the company has developed special external vertical turns with the help of which the user can perform various kinds of installation of corners.
Installation of external straight 90° bends is very easy, thanks to the special female and male connectors they are equipped with, like all cable trays. When connecting the edges of the turn to cable trays, they must be fastened with special bolts for a more secure fixation. It is very important that the user must level both ends of the cable trays. If this condition is violated, then you will get a bad bond with a turn, which, moreover, will have an unprepossessing appearance, due to a level mismatch.
Company IEK does not recommend users to mount a direct bend in two pre-wired cable trays. It is advisable to do the installation gradually, without this type of joints, then there will be no problem with leveling the level of two cable trays. Installation of a direct turn is carried out only due to the “mother” and “father” fasteners, without any additional fastening to the surface itself. Thereby, external turns 90° can be quickly mounted / dismantled in various places, when changing the layout of power lines. Direct Outward Turn made of the same material as cable trays, namely galvanized steel. The company has come up with a very good solution to the problem of creating bends used in the construction of power lines, which is widely used by users.
COOKIE POLICY DISCLAIMER
This website uses cookies to make its service as much effective and userfriendly as possible.
What are cookies?
Cookies are small pieces of data which allow us to compare new visitors with previous ones and to understand how users surf our website. We use the data collected through the cookies to offer you an experience capable of reflecting your interests and your preferences and to allow an easier access to our services. Cookies do not store any personal information about the user and no identifiable data are stored. The use of cookies may be disabled by personalizing the computer settings: it is possible to enable the clearing of all cookies or to set a warning message every time cookies are stored. Keep on surfing the website if there is no need to change the cookie application. Visit AboutCookies.org to obtain further information about cookies and their influence on your surfing experience.
The type of cookies we use
“Strictly necessary” cookies
These cookies are fundamental in order to enable you to move around the website and use its features, such as entering the website reserved areas. Without these cookies some essential services – such as for compiling a form for a competitive exam – may not be used.
“Performance” cookies
These cookies collect information about how the users use a website, e.g. which are the most visited pages and if error messages are received from web pages. These cookies do not collect information that could identify a visitor. All collected information are aggregated and therefore anonymous. These cookies are only used to improve the operation of a website. By using our website, the user accepts the installation of such cookies on her/his device.
“Functionality” cookies
Cookies allow the website to remember the choices made by the user (such as name, language or origin) and they supply modern and personalized functions. These cookies may also be used to remember the changes made to the text or font size and to other sections of web pages which may be personalized. They may be used to supply you the required services, such as watching a video or the comments on a blog. The information collected by these cookies may be made anonymous and incapable to control your surfing activity on other websites. By using our website, the user accepts the installation of such cookies on her/his device.
Here following is the table containing the cookies used in our website.
DOMINIO | NOME | DURATA | AZIENDA | TIPOLOGIA |
www.linvisibile.com | PHPSESSID | session | LINVISIBILE | Tecnico di sessione |
www.linvisibile.com | _ga | 2 annie | Analytics | |
www.linvisibile.com | _gat | 24 ore | Analytics | |
.doubleclick.net | id | 2 annie | Advertising |
How to manage cookies on your computer
If you want to allow cookies on our website, please follow the steps below:
Google Chrome
- Click on “Under the Hood”, find the “Privacy” section and select the “Content settings” button. 3. Now select “Allow local data to be set”
Microsoft Internet Explorer 6.0, 7.0, 8.0, 9.0
- Click on “Tools” in the upper part of the browser window and select “Internet Options”; now click on the “Privacy” tab.
- While allowing cookies on your browser, make sure that the privacy level is set to medium or lower.
- The use of cookies is not allowed if the privacy level is over medium.
Mozilla Firefox
- Click on “Tools” in the upper part of the browser window and select “Options”
- Select the privacy icon
- Click on Cookie and select “I allow the websites to use cookies”
Safari on OSX
- Click on ‘Safari’ in the upper part of the browser window and select the option “Preferences”
- Click on ‘Safety’ and on “Accept cookies”
- Select “Only from the website”
Mozilla and Netscape on OSX
- Click on ‘Mozilla’ or ‘Netscape’ in the upper part of the browser window and select the option “Preferences”.
- Scroll down till displaying the cookies in “Privacy and safety”.
- Select “Allow cookies only for the source website”
- Click on “Menu” in the upper part of the browser window and select “Settings”
- Select "Preferences" and then the icon "Advanced".
- Select the option “Allow cookies”
Google Analytics
This website uses Google Analytics, a web analytics service provided by Google, Inc. (“Google”). Google Analytics uses “cookies”, which are text files placed on your computer to help the website analyze how visitors use the site. The information generated by the cookie about your use of the website (including your anonymous IP address) will be transmitted to and stored by Google on servers in the United States. Google will use this information for the purpose of evaluating your use of the website, compiling reports on website activity for website operators and providing other services relating to website activity and internet usage. Google may also transfer this information to third parties where required to do so by law, or where such third parties process the information on Google’s behalf. Google will not associate your IP address with any other data held by Google. You may refuse the use of cookies by selecting the appropriate settings on your browser, however please note that if you do this you may not be able to use the full functionality of this website. By using this website, you consent to the processing of data about you by Google in the manner and for the purposes set out above.
You may also refuse the collection of data generated by the cookie and related to your use of the website (including your IP address) as well as the processing of the data by Google by downloading and installing the browser plugin available by clicking on the link below