Plastic doors are a reliable and durable design, but sometimes small troubles happen to them: the door can start to jam or unintentionally slam shut when the wind blows. With improper handling or normal wear and tear, the fittings may become unusable. In this article, we will consider what to do if it is jammed plastic door how to open it with improvised means, how to replace a broken handle.

Causes of malfunctions in the operation of plastic doors

Malfunctions occur due to improper handling, malfunctioning fittings and subsidence of the structure.

Malfunctions in the operation of plastic doors can occur due to improper handling, malfunctioning fittings and subsidence of the structure. Consider several options for how to open a jammed plastic door with your own hands.

Possible faults:

• due to the accumulated condensate between the frame and the sash, the sash may freeze in winter;
• skew can occur due to improper installation or shrinkage of the building;
• blocking of the lock when opening in the folding mode;
• the handle was not turned completely, the fittings opened in two modes at once;
• sank under its own weight (often occurs in structures with double-glazed windows);
• the window handle broke.

All these problems are solvable: in the case when their elimination can be postponed, then we call a window company specialist (if the door is under warranty, some types of malfunctions will be fixed for free), if it is urgent to open the sash, we try to figure out the cause of the problem and fix it with our own hands.

Troubleshooting if the plastic door won't close

The door sags under its own weight over time

Some time after installation, the sash may begin to open poorly, close and jam. Sagging occurs under the influence of its own weight over time. The fittings are designed so that they can be easily adjusted with your own hands, for this you need a hexagon.

Adjustment steps:

1. Open the sash in the rotary mode (normal opening).
2. We find the screw in the end part of the sash near the top hinge. Turn it clockwise with a hexagon. To move the sash closer, we make several turns.
3. We remove the decorative plugs from the upper hinge, turn the adjusting screw clockwise.
4. If the balcony sash rubs against the plastic frame in the middle, move the structure closer to the hinges. We move the sash to the lower hinge by turning the adjusting screw. If the canvas continues to overwrite, adjust the top loop.

If the door does not close after switching to another opening mode

We are looking for an opening blocker if the fittings are from quality manufacturer, then the blocker will be installed in the right place. It looks like a small tongue, located on the end of the sash, in the middle of the structure.

We press the blocker, bring it to a vertical position, at the same time turn the window handle to a horizontal position, to the opening mode.

On fittings "Aubi" instead of the tongue, a metal plate with a spring is installed. We press it to the sealing rubber, close balcony door by turning the knob down.

Repair of the handle on a metal-plastic door

The screws are under the decorative plate

If the handle on the door began to stick, it is necessary to lubricate it, but it happens that it breaks. It can break due to natural wear or under the influence of significant efforts when opening it. If you need to replace it, it is very easy to remove it with your own hands.

How to remove the handle:

Handles on metal-plastic windows and doors are made of plastic and aluminum. Plastic handles often break, an aluminum reinforced handle will last much longer. You can buy it at any company that sells metal-plastic windows. These elements are produced in white, brown, golden and silver shades.

The handle is attached to a square, which is inserted into the fitting groove. All manufacturers of fittings have a standard groove, when buying, pay attention to the material from which the handle is made, it will fit the window and balcony door.

The door does not open, there is a child on the balcony

If the lock or handle breaks, the door to the balcony slammed shut, the child was left on the balcony, and you can’t open the sash in any way, it’s easy enough to remove the double-glazed window. We prepare the knife, the double-glazed window is held by plastic glazing beads, we hook the glazing bead in the middle, carefully remove it, and take out all four glazing beads. Now you can freely remove the double-glazed window, the path to the balcony is open. We buy a broken element in a window company, change it with our own hands or call the master.

The subtleties of adjusting the plastic door, see this video:

To install the double-glazed window in place, you need to put it on plastic linings, insert the glazing beads and hammer them with a rubber mallet.

When installing a double-glazed window with your own hands, you need to perform all actions very carefully so that the double-glazed window does not burst. Do not forget that double-glazed windows are heavy.

Opened the door in two modes

If the handle was not turned all the way when you open the sash to the ventilation position, then the fittings can work by opening the sash in two modes, while the canvas hangs on one hinge. This trouble is easy to fix with your own hands. Gently press the sash near both hinges, press it firmly against the frame, move the handle to a horizontal position, open it in the opening mode. Now the metal-plastic construction will work properly.

If it was not possible to move the handle to a horizontal position, we find the opening blocker from the end of the sash, move it to a vertical position, now the handle will turn easily.

Open frozen door

The closing mechanism freezes to the frame when the open door condensation has accumulated, that is, the door was closed, and the resulting moisture froze around the perimeter of the sealing gum. There are two options here: wait until it gets warmer, but if there is no way to wait, we heat the air around the door with a hairdryer, after a while the structure should thaw and open.

For the secrets of the proper operation of plastic structures, see this video:

High-quality fittings are easily adjusted, if there is a need for replacement, they change one element without replacing all the fittings.

Methods to open the balcony door from the inside or from the outside if the fittings are jammed. The means at hand, needed for this.

How to open a balcony plastic the door is outside if you stayed on the balcony

Being closed from the side of the street, when you have no idea how to open the plastic balcony door from the outside, is unpleasant and even unsafe if the balcony is not insulated, and the weather does not favor walking in home clothes. Owners of plastic windows and doors of an old standard that are not equipped with a handle for outside use are not immune from similar incidents.

The absence of additional fittings is a feature of the most conventional models PVC windows and balcony doors. What to do in such cases and what are the existing methods to get home without harm to the design of windows and doors? There are options, and anyone who does not have a balcony door equipped with a double-sided handle should take note of them.

Why the door jams: the main prerequisites

First, let's figure out why the balcony does not open door balcony or loggia, regularly served earlier. There may be several circumstances. One of them is an inaccurate appeal. Sudden movements in relation to the plastic balcony door can lead to a reverse effect - the latch mechanism will not work correctly and the exit will be blocked.

The malfunction of the door can also be affected by malfunctions of the devices. So, for example, the reason is:

• in malfunctions of the lock mechanism during the opening of the canvas in the “ventilation” mode;
• in the breakage of the handle;
• in the skew of the structure;
• in the freezing of the system due to the condensate formed between the box and the sealant.

The listed faults are not critical. As it turns out to find the cause of the web jamming, it is worth trying to return it to the “open” position in a piquant way. It is important at such moments to remain patient, not panicking, trying to break the product. A broken balcony door will add to the hassle and cost of repairs and replacements.

Options for "liberation" from a balcony blocked from the inside

If the plastic door to the balcony is jammed, where there is at least a small set of tools (it does not hurt to keep it there just in case), then the situation can be considered controlled. An ordinary screwdriver is enough to gently press the latch of the lock, slightly pressing the fittings. If everything is done correctly, the sash of the canvas will open slightly and it will turn out to put your hand in for the final opening.

Video: How to open a plastic balcony door from the inside?

The video shows how you can open the plastic door to the balcony from inside the apartment with a handle.

Course - "How to crack the door on the balcony" [confirmation]

How to hack balcony door? I will teach this technique - Troll)

Instead of a screwdriver, a spatula, a hacksaw or a knife are suitable for these purposes. The main thing is to test with a sharp object to lift the glazing bead, which is attached to the door with a double-glazed window on each side, disconnecting it from the central part to the edges. The same manipulations must be done from above and below, after that try to pull out the glazing bead, pulling it in your direction, in this way, freeing the double-glazed window.

The fundamental point: the weight of a double-glazed window in the design of a balcony door can exceed 30 kg, so you should be very careful holding it after all the manipulations.

After the double-glazed window is pulled out, unhindered access to the door handle from the inside will open. Even if the lock does not work and the door does not open, you can get inside through the window opening, continuing to repair the door in a warm room.

Attention! Don't try to break the glass pane. The outer glass is quite thick and is more likely to withstand pressure. Only a heavy iron object can cope with glass with a width of 4 mm or more. Glass shards can cause injury, and replacing double-glazed windows will require investment.

Ruler for unlocking the balcony door - how to use it?

If a set of tools, a knife or a hacksaw, when the balcony door on the loggia is jammed or balcony it didn’t turn out, but there is an opportunity to use an iron ruler, it’s worth trying to get out with it.

Just as in the case of the sharpened objects listed above, you can pick up and pull down the blade latch with a ruler. Actions must be careful, without haste, with respect for the material of construction. The plastic is quite flexible, so the ruler will be able to reach the target.

If it didn’t work to open the latch with a ruler, for example, when the cause of the jamming is not in the lock, it is worth trying an effective and piquant method with unscrewing the door hinges. It will be easier to cope with the task if you know their device. Usually a balcony door hinge is an iron tab with fasteners, a frame part and a spacer.

By adjusting the component hinges, even when the door is stuck, you can move the canvas a little in the right direction.

Fundamentally: in most cases, the screws of the door leaf are masked by decorative overlays.

Jammed door: what to do inside the room

It is not so unpleasant to face the fact of a jammed door inside the room, having at hand everything you need to solve the problem on your own, as well as the ability to call a master who knows what to do if the door to the balcony is jammed and how to set it up for normal operation without replacement.

Often the balcony door jams from the inside in the ventilation mode. To solve the problem, it may be enough to set the handle in a horizontal position, then feel the touch to find the iron tongue at the end of the canvas in the lock area, setting it to vertical position.

As an option, it is also worth trying to press down on the spring-loaded plate responsible for blocking the lock, or to align the canvas in a vertical position, attaching it to the box while turning the handle down to the end. These activities help open balcony door from the inside without drastic intervention in the operation of the system.

In conclusion, we note that no one is immune from the problems associated with the operation of balcony door systems, while it is not so important whether the structures are equipped with an additional handle on the outside or not. The main thing is to be ready for any force majeure situations, having on the balcony or loggia allowing open the jammed door is the usual set of tools. Prevention of breakage will be constant care for the door, with lubrication and adjustment of the hinges, timely repair of fittings.

8164 0 2

Hello. In this article, I will talk about how to equip outdoor balcony . The topic of the article is still relevant, since along with many glazed loggias, open balconies are widely used.

Unlike their glazed counterparts, open balconies are rarely tried on as year-round pantries and storerooms for supplies. Most often, such structures serve as places for recreation in the warm season. Therefore, I will give advice on arrangement in the first place based on these considerations.

What should be open balconies

Among the requirements that apply to open balconies in Khrushchev and in a private house, we note the following:

• Durability of the structure due to the strength of the floor and wall finishes;
• Safety through application non-slip coatings when finishing the floor;
• Comfort of everyday use due to the presence of a well-designed visor, mosquito net, etc.;
• Security against unauthorized entry - is achieved through the correct choice and high-quality installation of the fence;
• Aesthetic appeal both inside and outside the balcony - achieved thanks to right choice fencing design and through the use of various decorative elements, from wall and floor finishing materials to landscaping in portable flowerpots.

Consider how the arrangement of open balconies is carried out in accordance with the listed requirements.

Floor screed

The correct arrangement of the floor is the condition due to which for a long time it will not be necessary to repair an open balcony without glazing.

Due to the lack of glazing, the floor covering comes into direct contact with atmospheric precipitation and is subject to temperature fluctuations. That's why correct instruction screed installation includes the following points:

• Laying two types of reinforcing mesh - a welded mesh with a square section and a twisted mesh netting with a smaller mesh size;

In order for the reinforcing mesh to be useful, we not only lay it, but also fix the dowel with nails.

• Installation of beacons;

In order for the water to not stagnate on the floor surface, we set the beacons with a slight slope to the outside of the balcony.

• A cement-sand mixture is being prepared, based on the usual proportions - 2 buckets of cement per 6 buckets of sand;

• The screed is pulled out;

Since the site is open, it will be correct to cover the screed with plastic wrap. This is done so that the solution dries evenly over the entire thickness and does not crack on the surface. If it is not possible to cover the screed, you will have to water the surface with water several times a day for a week.

• After the screed gains branded strength (on average, from 2 to 3 weeks), we cover the surface in several layers with liquid glass, carefully smearing the joints of the floor to the walls.

Laying tiles

What to lay on the floor? Of course ceramic tiles designed for outdoor use.

The instruction for laying ceramic coatings on an open balcony is not much different from similar work indoors. The essential difference is the selection of special materials. For example, a special moisture-resistant adhesive is used, designed for external work and special polymer-based.

Choosing Decoration Materials do not forget that the tile must be safe, which is provided by a rough non-slip surface.

It is mandatory to lay a ceramic border at the junction of the floor and walls, which will prevent the penetration of water between the wall and the screed.

If all-weather use of an open area is expected, I recommend laying a heat cable under the tile. When the system is connected to the network, the surface temperature of the site will be a degree higher than the snow melting temperature, as a result, there will be no ice on the surface of the tile.

Finishing the walls

Another factor that determines how durable an open balcony will be is wall decoration. However, the aesthetics of the design also depend on how and with what materials the wall cladding is made.

How and with what to finish the walls? Among the common materials, I can recommend ceramic wall tiles with a glossy surface. The use of glossy tiles will allow you to do without cleaning the walls for a long time, since dust and dirt do not linger on the glossy coating.

Also for cladding vertical surfaces you can use imitation of natural stone. Such tiles are more difficult to lay in comparison with ceramic counterparts, and its price is higher. But believe me, a balcony with walls lined with imitation stone looks amazing.

as more simple solution I propose to decorate the walls with decorative plaster. Such a decision will be especially justified if the facade of the house is also covered with decorative plaster. By the way, the instructions for the decorative plaster device are described in detail in my other articles, and you can read more about it.

Making a visor

This point will be of interest to owners of fully open balconies, that is, without a roof. This situation is typical for loggias in suburban multi-level buildings or for top floors apartment buildings.

Be that as it may, but the roof is necessary, as it will protect you from precipitation and protect you from the scorching sun.

The most successful of the considerations: quality, appearance, price and reliability is a visor made of a metal profile and polycarbonate.

You can make such a visor with your own hands as follows:

• We select or draw a drawing from scratch;
• We prepare materials for assembling the frame;
• We cook the supporting frame from profile pipe;
• We cut and fasten polycarbonate to the profile;
• We install the finished structure.

If desired, the visor can be combined into one design with a balcony railing. In this case, the structure will receive additional reliability and aesthetic appeal.

Fence Installation

If you don’t know how to protect the balcony from robbers, I recommend making and installing a fence from the floor to the visor. If there is no danger of robbery and the fence is needed only for security and decorative purposes, I recommend limiting yourself to a small elegant fence at least 1 meter in height.

If there are small children, we make a fence on the balcony with a gap between the bars no wider than 15 cm.

From a wide range of fences for arranging an open balcony, I recommend prefabricated structures welded from a profile pipe with welded forged elements. If a balcony is set up in country house, instead of the usual fence, you can use a wooden fence assembled from a polished picket fence.

After we looked at ideas for decorating the ceiling and walls, how to decorate open balconies? Recommendations are as follows:

• We actively use landscaping in hanging pots and flowerpots;
• We use climbing plants that will not only decorate the balcony, but also give shade;
• On summer time you can apply drapery, for example, light mesh curtains, which will become a barrier to dust and insects;
• If the area of ​​\u200b\u200bthe balcony allows, we place a portable garden furniture such as a couple of chairs and a small table.

In this photo we can see a balcony decorated in the Provence style. Such decor trends are typical for the south of France, for Spain and Italy.

Despite the abundance of flowers, they are all concentrated in one part of the fence, and therefore this decorative element not perceived as overly garish. Forged railings make the structure less cumbersome compared to loggias framed with concrete slabs.

The following example is good design balconies through the use of artificial turf.

Artificial grass looks realistic and is combined with plants in pots and flowerpots. What's more, artificial grass is easy to install, durable and long lasting.

When using artificial turf on open loggias, take care of high-quality waterproofing of the floor.

In this photo you can see the decoration made using climbing plants. The advantage of this solution is the availability of climbing plants and ease of care for them. By the way, most of these plants are perennial, which means you do not have to re-plant them every year.

Conclusion

Now you have a general idea of ​​how to decorate an open balcony so that it is aesthetically attractive, comfortable to use and durable. If you have any questions, ask them in the comments to the text, and I will answer them with guarantee.

By the way, do not forget to watch a useful video in this article, perhaps during the viewing you will find answers to your questions.

Greetings to all blog readers! Today we are going to talk about regulation. PVC doors on the balcony.

A lot of my friends complain that it blows through the door, it does not close tightly and there are a lot of other problems. I have to go and find out what happened there.

In fact, there is only one reason - improper care of fittings and rubber bands. We have to explain every time what needs to be done, how to care for the door. In this regard, I decided to write instructions for everyone and everyone, all of a sudden you have the same trouble and you cannot find a solution.

Today, almost every apartment is equipped with metal-plastic balcony blocks. As you know, both windows and doors in them can wear out over time. Most often, it is plastic doors that require repair, because in just one day they can be opened and slammed countless times.

The door weighs more than window frame, respectively, and it is easier to deform, and sometimes its “creeping” occurs when the structure is lowered. There is a need for urgent repair of the sash.

To adjust a failed balcony door, in general, the same principle is used as in setting up a window mechanism. However, door repair is distinguished by a number of characteristic properties. We will talk about the problems that may arise during the operation of plastic doors, and how to solve them, in this article.

First of all, when starting to adjust the door, you need to stock up on screwdrivers (ordinary flat and Phillips), as well as a 4 mm key to adjust the screws on the door hinges, pliers.

Sometimes it happens that the plastic door to the balcony does not close. This problem occurs, as a rule, due to sagging door hinges or breakage of fittings, in particular, the lock. Often there is a deformation of the sash itself. In this case, you need to find out the cause of the malfunction, and only then proceed with the repair.

If the door with its lower structural element, when trying to close it, clings to the threshold, and it needs to be lifted by holding on to the fittings, then the sash has lowered under the weight of its weight. Due to the impressive size of the balcony doors, such a distortion often occurs. If the door touches the frame in the center, we can talk about a horizontal displacement of the sash or a change in its shape.

This sometimes happens when high temperatures. Sometimes the mechanism that presses the sash to the frame breaks. As a result, the door frame remains slightly closed and does not lock even when the handle is turned. This problem can be solved by repairing the clamping mechanism.

Adjustment of the balcony door fastening mechanism

If the structure sags, the upper door hinges are adjusted first.

It is necessary to fully open the sash, place the product in the pivot position, then release fastener from a decorative hat (mostly on all metal-plastic doors, the hinges are covered with special caps, it is under them that the screws are hidden).

After that, using a spanner wrench, tighten the adjusting screw several times to the right. This will correct the crooked position of the structure and prevent it from sagging again. It happens that in order for the sash to rise, it is also necessary to twist the hinges from below. They have top and side screws.

The door can be raised a few millimeters by adjusting the top end screw. If you rotate the side screw with a key, then the sash is pressed or, on the contrary, moved away from the opening.

Thus, sagging is eliminated by turning the adjusting screws on the hinges in the lower and upper parts of the door leaf. They are designed so that you can move the sash a little in one direction or another.

What to do if the canvas touches the frame when opened

In this case, the door with its upper border can touch the frame. This indicates that, when adjusting the sag, the sash was moved to a greater height than necessary. It is easy to fix this problem: it is enough to make a single turn of the end screw in the lower loop. Sometimes the door cannot be closed completely, and the resulting gap allows cold air to pass through.

To avoid drafts, the sealing material should be changed. To do this, we purchase a suitable sealant on the construction market or in a store.

Using a screwdriver, we release the groove from the old profile, then clean it from dried glue, wash it with a damp sponge or cloth.

Then you need to let the groove dry, then apply a layer of glue and attach a new profile with the fastening side. In this case, the cord or material for insulation must not be pulled. It must be carefully smoothed out with your hands or with a special copper tube with a bent end. The ends of the profile must be firmly glued.

So that the owners of balconies do not have to often change the cord for sealing in the future, it is recommended to treat it with a special silicone mixture. You can usually purchase silicone for lubrication from the supplier of the balcony block system.

The handle for the plastic balcony door deserves special attention.

Deformation of locks and fittings is a fairly common problem. Sometimes, the door handle does not make a full turn and this requires force.

Such a malfunction is eliminated by applying horizontal adjustment of the door. In this case, it is possible, especially before the start of the cold season, to press the door leaf more tightly in the opposite direction from the hinges. This is fine.

However, in the spring it is better to reduce the force of the clamping sash mechanism, since this will break it faster, and the sealing profile will also be erased. In situations where the handle is severely damaged, it is better to replace the deformed structural element with a new one.

If the handle is loose and turns too easily, you need to turn the bar at the base by 90 degrees. Under it are screws that should be tightened. This simple procedure will quickly solve the problem.

In order to check whether the adjustment of the balcony door is carried out correctly, let's try to close the sash. If this happens easily, with a slight pressure on the handle, then the adjustment has been made correctly.

Castle breakdowns

The locking mechanism of the door frame keeps the sash closed. With frequent use, it breaks down and needs to be replaced.

The lock is screwed to the end of the product with screws. You just need to unscrew them, pull out the old balcony latch for plastic doors and screw on the new one.

Elimination of microdefects, scratches and chips

Over time, small cracks and damage may appear on the surface of the balcony door. To get rid of them, use a special mixture called "Cosmofen" or any other component of similar composition. It should be applied to visible places with defects and wait until the surface dries.

After that, a special substance is also applied to the chips - plastic in liquid form. For doors with lamination, a wax pencil or a so-called furniture touch is suitable. Sometimes a balcony opening can be repaired only by contacting a specialist.

This applies to such defects as the appearance of cracks and chips on a double-glazed window, holes in plastic, and destruction of welds. This may break the mechanism. door hinge. In some cases, you even need to order the manufacture of a new door or call a repairman.

Occasionally, when adjusting the overlap, it becomes necessary to move the double-glazed window. Adjusting screws can be used to move the door a few millimeters. If you need a larger offset angle, you need to combine both types of adjustment - with screws and moving the glass unit.

The double-glazed window is fastened with rods. They should be removed, and then put squeezing blades under the double-glazed window, which will act as a lever, and with their help move the double-glazed window in the right direction. In this case, the spring effect begins to act and the plastic door is displaced after the double-glazed window.

After adjustment, you need to fix the double-glazed window again with rods. These fasteners are different sizes for different parts structures, so care must be taken not to mix them.

Balcony door fixing

In some cases, it becomes necessary to completely remove the sash. For example, to carry out complex repairs or when it is necessary to leave an opening open at the exit to the balcony in order to take out large pieces of furniture there.

First, remove the special cap that covers the upper loop. Then press the axial rod (pin). The pressure should fall on his head, which rises above door hinge. With the help of pliers, it is necessary to hold the pin from below, and also pull it out to the end.

The next step is that the structure is tilted towards you and slightly raised, 5 to 6 cm is enough. This procedure removes the fasteners from the bottom hinge, which allows you to remove the door and move it if necessary.

After some time, the sash again needs to be put in its place in the opening. The installation of plastic doors on the balcony is carried out in several stages: The lower hinge is mounted on the rod for fastening with a special hole. Then the door is set to working position.

With proper pressure on the pin of the upper hinge, it will take its original position, while protruding from both sides of the hinge by 5 mm. Finally, return the decorative attachments for the loops to their place.

Don't forget about big weight plastic balcony blocks.

The sash is quite heavy. If you drop it during dismantling, the hinge mechanism will break. In this case, you will either have to buy new door, or seek help from professionals, masters in the installation of balcony blocks. In order to avoid such troubles, it is better to remove and hang the door by inviting an assistant.

Often the installation of a balcony metal-plastic system is identical to the installation of any standard interior fabric or sashes. However, the method of opening is essential here. This determines the specifics of the installation. It is carried out in stages.

First you need to remove the old floor. The next step is cleaning doorway. It is necessary to sweep away the remaining debris, wipe sides dust holes in the wall. Then you can proceed directly to the installation of the door frame.

In this case, if sliding products are being installed, it is necessary to attach guide profiles. The remaining gaps are filled mounting foam, after which the door is put on hinges. At the end, the line of fittings and handle adjustment come up.

As a rule, when buying a balcony door, a guarantee is issued for it. While the warranty period has not ended, it is better to use the services of a master for installing plastic windows and doors. Some defects and malfunctions are difficult to fix on your own.

In addition, if you additionally damage the door during the adjustment or repair process, you will no longer be able to count on the warranty and free troubleshooting.

You can set up a balcony door, if it has become poorly functioning, with your own hands. However, you need to approach this process wisely so as not to accidentally damage the structure. Therefore, the main thing in the installation and adjustment of plastic doors to the balcony is the exact observance of technology, accuracy and attentiveness when taking measurements.

If you make a mistake somewhere during the installation process, the door may begin to bend, bend and simply work poorly. Sometimes when adjusting a balcony door, the locking mechanism is destroyed. In this case, you need to replace it with a new one.

Source: zonabalkona.ru/dveri/ne-zakryvaetsya-plastikovaya-dver.html

When adjustment of a balcony plastic door is required

The price of a balcony plastic door is quite high, but buying an expensive high-quality model does not save you from frequent cases of mechanism breakdowns. It's all about its frequent use, leading to a decrease in the tightness of the sash.

In addition, double-glazed windows provide excellent sound insulation, while PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under its own weight and ceases to close tightly. As a result, a noticeable draft appears in the room, and the insulation of the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is tightly pressed against the profile of the door frame.

If this is the case, intervention in the door mechanism is not required. However, if you notice the slightest deviation, you immediately need to repair plastic balcony doors. You should not delay calling the master, because with each opening and closing the situation will worsen. As a result, this can lead to balcony doors not closing at all.

Helpful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch a video of self-adjusting plastic balcony doors and fix the problem yourself.

Types of balcony door malfunctions

If you are adjusting a plastic balcony door with your own hands, it is important for the success of the repair to determine the causes of the malfunction. Most often, the problems are as follows:

Type of malfunction	Cause
Sagging of the door (when closing the door clings to the plastic threshold)	Most likely, the structure is too heavy, which leads to its displacement downwards
Dangle handle for balcony door	Usually the handle starts to dangle when the balcony door is opened very often
Plastic balcony doors do not close tightly (the leaf is not tightly pressed against the frame and you feel a draft)	This is usually a symptom of a malfunction. door handle or door skew
The leaf is shifted to the side (the door touches the middle of the frame)	Most often, the problem is in the hinges, adjusting them will help fix the problem. This problem often occurs due to constant sudden temperature changes that affect the fittings for plastic balcony doors in case of insufficient insulation of the balcony

To test the door for tightness, slam the door with a regular landscape sheet of paper. Try to drag the sheet around the perimeter of the door. If it moves easily, the design has lost its tightness and needs to be adjusted.

Evaluate also the tightness of the pressure of the seal: unequal pressure of the gum, as a rule, indicates sagging. Determining the side of the offset is simple: pay attention to the place where the seal is squeezed and check if there is a trace from the sash on it.

How to determine the skew of the door leaf

If you suspect that the structure is skewed, cover the sash, and then run around the perimeter closed door with a simple pencil.

Open the door and compare its outlines with the drawn line. The presence of irregularities indicates that the door is skewed. For the accuracy of the result, use the building level.

Table of values ​​for door leaf adjustment

Suppose, as a result of measurements, you learned that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). So, everything is in order, and there is no skew of the door. If the width of one strip is 12 mm, and the other 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that from the side of the loops the width of the strip is 3-4 mm, and from the side of the handle 6-7 mm. Such indicators indicate a narrowing of the sash by 4-6 mm - this is a manufacturing defect, and it makes no sense to move such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will be in the shape of a barrel - this happens if the installation is incorrect, when the middle of the frame is drawn to the wall more than the top and bottom. Such errors also lead to loose clamping.

By measuring the width of the sash from all sides, you will determine the correct length of the impost. The difference between the three measurements should not be more than 0.5-1 mm.

With indicators different from the norm, the length of the impost differs from the required one and causes the door to skew.

How to adjust a plastic balcony door: step by step instructions

To avoid mistakes or accidental damage to the double-glazed window of the balcony door (the cost of which is quite high), you need to figure out how to adjust the plastic balcony doors correctly.

When carrying out work, it is not necessary to overpay for the master: you can adjust the balcony door with your own hands - video instructions can be easily found on the Internet.

You will need quite a few tools to get the job done:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door, it scratches the lower edge of the frame, this indicates a sagging sash. Adjustment in this case can be vertical or horizontal.

Scheme of vertical and horizontal adjustment of the door

Stages of horizontal adjustment:

1. Open the door wide to swing position.
2. A screw is located near the top hinge at the end of the sash. Take the hex wrench and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws under the plugs clockwise.
5. After adjusting the mechanism, check if the door now closes freely. Tighten the screws again if necessary.

To understand how to adjust balcony doors vertically, do the following:

1. Lift the door evenly and locate the screw at the bottom end of the hinge, located along its axis.
2. If the screw is covered with a plug, carefully remove it.
3. If you turn the screw clockwise, gently lift the door, if against, lower it.

Balcony door pressure adjustment and door handle adjustment

To tighten the handle for a plastic balcony door, you must do the following:

1. Slowly and carefully turn the plastic cover at a right angle.
2. Under plastic lid find screws for fastening. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock with a special material that does not contain resin and acid. In case of a complete breakdown, it is worth buying a handle for plastic balcony doors, unscrew the screws, remove the old part and put a new one in its place.

Helpful advice! good option is to install a magnetic latch on the balcony door. It will avoid too frequent impact on the door handle each time the door is closed and opened, which will have a beneficial effect on its durability.

Schematic instruction for self-regulation of the position of the balcony door

If it blows from plastic balcony doors, this is a sure sign of loose pressing of the sash. It is necessary to adjust the pressure of the plastic balcony door. To figure out how to adjust the plastic balcony doors to the clamp, look for locking elements on the door leaf. They are responsible for the density of the clamp.

Using a key or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically making self-adjustment plastic balcony doors depending on the season.

It is enough to figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the pressure in hot weather and seal it in the cold season.

Sometimes adjusting the hinges does not help solve the problem, and then you can eliminate the tightness of the clamp with the help of a trunnion. For this you will need pliers.

To maximize the door pressure, install the trunnion perpendicular to the profile. To, on the contrary, achieve a minimum pressure, position the pin in parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This happens because rubber compressor worn out, and any door adjustments are meaningless without replacing it. For this you need:

1. Pull out the old rubber. This is done without much effort and additional tools you won't need.
2. Remove dirt from the inside of the groove.
3. Install new seal. Make sure that the side bend falls on the end of the sash.

Helpful advice! To facilitate the work, remove the sash from the frame: this way the access to the rubber gaskets will be free from the side of the hinges. It is better to prefer a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the position of the door does not return to normal, repeat the procedure with the upper hinge.

Prevention of malfunctions of balcony doors

If you had to build a house yourself, adjusting the balcony door fittings is more important, because you want the result of your work to last longer. To minimize the risk of problems in the future, try to follow these rules:

• reputable manufacturer - guarantee good quality products, because in terms of durability and performance, the quality of the materials from which the door and fittings are made is of paramount importance;
• when buying fittings, make sure that all selected parts are suitable for the type and size of the balcony door: please note that modern fittings are designed for a weight of 100-130 kg;
• so that you do not have to figure out how to tighten the plastic balcony doors, take care of the presence of a special microlift: this part-compensator prevents the door leaf from sagging under the influence of its own gravity;
• so that the door does not sag, and the sash does not jam, it is worth installing a special additional tire that limits the opening of the door.

Helpful advice! The microlift is especially relevant in the case of a double-glazed window, which is distinguished by its impressive weight and size. The design of the microlift can be different, representing a small lever on the side of the sash or a roller in its lower part.

Also, even at the stage of installing the door, follow the following points:

1. Along the entire perimeter of the door frame, the frame should fit evenly and tightly to it.
2. Opening and closing doors should be easy and effortless.
3. When checking with a building level, it should be obvious that the structure is installed exactly vertically.
4. There should be no drafts.
5. If the door is level, in the semi-closed position it should not open or close on its own.

Remember that self-adjustment of the door is possible, but requires attention, caution and thorough troubleshooting.

Therefore, if there is a valid warranty on the balcony door, if the slightest malfunction is detected, it is worth contacting specialists who will quickly determine the causes of the problems.

If you are sure that malfunctions occur due to manufacturing defects or installation problems, it is also better to turn to professionals - self-tightening the bolts in this case will not correct the situation.

If you decide to adjust the door yourself, be sure to follow the instructions, and in case of replacing fittings, choose products from the same company as your balcony doors.

Jamming of a metal-plastic structure, which most often leads to a balcony, is enough common problem. It usually happens at the most inopportune moment. The breakdown itself is quite unpleasant, since it is usually not clear what to do in such a situation, how to fix it. If the door does not open, most likely it is jammed. In this case, you have to open the door without a key, which can be done in various ways.

Appearance one of the traditional plastic structures leading to the balcony

Sometimes it happens that the door jams at the moment when you went out onto the balcony in a light bathrobe. It will be useful to know in advance what to do if the structure is closed. Allocate various ways opening without a key, especially since there is usually no handle on the outside of the balcony door. This complicates the opening problem, but suitable methods for solving the problem can be identified.

Causes of door jamming

Attention! One of the most common causes of door jamming is improper operation by the owners. Many try to slam the door, pulling it towards themselves and pulling their hand out from under the structure at the very last moment. Often, all this leads to jamming due to the operation of the latch mechanism. In addition, this leads to rapid wear of the blade.

Improper operation of the door leaf is the main problem of breakdowns and failure. Also, jamming can be caused by sharp blows or slamming. This leads to a violation of the functionality of the structure. It is also worth highlighting the following reasons that the door does not open:

1. Broken lock on a plastic door. It can break when worn or objects get inside.
2. Skewed plastic construction due to weight or improper installation.
3. Failure of fittings, including the door handle.
4. Freezing door in winter time. This leads to the accumulation of condensate, which negatively affects the functioning of the canvas.
5. Involuntary blocking of the lock mechanism.

Of course, all these reasons are not critical. Everyone can deal with them. However important point It becomes a clarification of the cause, because only after that it is possible to eliminate the problem. If it is fatal, it is not recommended to eliminate it yourself. This may exacerbate the problem.

Balcony door jammed when a person was outside

What to do in non-standard situations?

Sometimes, especially during severe frosts, a plastic door can freeze to door frame. This can be observed when the structure is open for ventilation or if condensation accumulates on the seal. This leads to freezing it and the inability to open it. Initially, it is worth considering whether it is really necessary to urgently open the door. If so, don't try to break down the door. It won't lead to anything good.

Initially, you can try to warm the door. To do this, use a hair dryer. With mild freezing, 5-10 minutes of intensive heating will be enough. After that, wipe the box, and wipe the seal with a lint-free dry cloth. From above it is lubricated with silicone grease, excluding further freezing.

Appearance of a frozen metal-plastic door

Using a screwdriver as the main tool

You can try to open the lock mechanism with a thin screwdriver, a card or a metal blade. The principle is quite complicated and cannot always be carried out after the door has jammed. However, if any element of the lock often sticks, it is recommended to have necessary tools at hand.

The algorithm is based on picking up a glazing bead with the selected element. It is usually fixed in the double-glazed door. At the same time, try to act carefully so as not to scratch the door leaf. To do this, the glazing bead is picked up in the middle from the long side, after which it is carefully disconnected with both hands, moving towards the edges. Similar work is done on the other side of the element, as well as from below and above.

After the retaining glazing bead is removed, the double-glazed window should be removed. To do this, gently pull the upper edge of the double-glazed window towards you. Remember that a triple-glazed window weighs quite a lot, on average about 30 kg per square meter. Now you can reach the door handle to open the lock of the metal-plastic door from the inside. If not, you should try to get into the opening.

This method is also suitable when there is a latch instead of a lock. Remove the front panel and insert a screwdriver. With its help, they feel for the latch and move it.

Also, the method is perfect in cases where the handle has failed. To do this, a suitable object is inserted between the frame and the door. It can be a card or cardboard. With its help, they push the tongue to open the door.

Algorithm for opening a metal-plastic structure using a thin plate

What to do if the key is broken?

If the door leading to the balcony does not open because the key is broken, solving such a problem is much more difficult. You will have to use pliers or other improvised means to remove the key chip. However, this can be done only in cases where it sticks out. If not, the problem is somewhat more difficult to solve.

The main tool for solving the problem is the jigsaw blade. It should be thin enough to fit through the keyhole. The blade is pushed from the bottom side with the teeth up. After that, it is turned so that the key is hooked. This will help you get it out of the keyhole. After you got rid of the key fragment, you can use any of the above methods. At the same time, if you have an additional key, the problem is easily solved. You can safely use it to open the door.

If it was not possible to extract the chip in this way, you will have to solve the problem in a different way. To do this, unwind the lock using improvised methods. This will allow you to get the larva. However, in any case, it will be quite difficult to open the door, you may even need to call the master.

Jamming the door leading to the balcony, which will have to be opened without a key

Other methods of opening the door to the balcony

You can open the door leading to the balcony in other ways. They will be especially effective if the handle or lock is broken. The first thing to do is to get to the door, or rather to its inner side. To do this, gently squeeze the double-glazed window out of the door leaf. Usually it is fastened with glazing beads, which are previously removed. Now you can easily get to the broken handle.

The second method is considered no less effective. It is based on reducing the strength of the vestibule. This is done using an ordinary hex wrench. They unscrew the screw that holds the hinges in a certain closed position. It should be understood that with the door closed it will not always be possible to do this.

Attention! If all else fails, you can use radical methods. These include the complete dismantling of the door or fittings. It should be understood that this will lead to the need complete replacement door structure.

Metal-plastic door that leads to the balcony

Now you know how to open a PVC door on your own if the lock is broken or the handle is out of order. It is worth choosing the preferred way to open the door to the balcony. There is no need to worry about the fact that the key to the door is missing. It will be possible to open without it at all. If your door leading to the balcony often jams, functions with difficulty, or has problems with the mechanism, you should familiarize yourself with possible ways to open the structure.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

New Articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

Grade

Latest reviews

adminadmin