Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals. Instructions for the correct assembly and disassembly of a bed with a lifting mechanism Detailed diagram for assembling a bed with a lifting mechanism

For many people, the purchase of furniture is a significant event. Headsets are not bought every day, I want them to last longer and be comfortable. Most people try to assemble furniture at home on their own, but not everyone knows how to do it right. To better understand how to assemble a double bed, an instruction will help, which describes all the nuances, without which this process can become quite problematic.

Before proceeding with the assembly, it is necessary to check the presence of all parts and components of the bed. Usually the standard set includes:

headboard;
longitudinal side frames (tsargi);
central frame;
furniture corner (coupling);
a set of screws of the right size;
additional orthopedic base.

Assembling a double bed is not easy to assemble, this process requires accuracy as well as care. You should start work clearly according to the instructions, where the assembly is described step by step, a list is given the right tools and materials. First of all, you need to have self-tapping screws, screws, bolts. Of the tools you will need screwdrivers with different tips, a screwdriver, a wrench. To assemble new models of the bed, euro screws can be used, for which specific keys are needed. There will be no extra tape measure, since you will have to measure parts of the parts, and the level, to measure the accuracy of the angles.

Before starting the assembly of the bed, you should remember the basic principles and requirements:

it is inconvenient to assemble alone, it is better to do it together;
the room should not be cramped, you need a place to lay out large parts, take measurements and cut;
bolts and screws should not immediately be strongly fixed, first all the parts must be assembled, and then it is only worth fixing the fasteners;
assembly instructions need to be kept, sometimes you have to redo something.

Basic workflows

Assembling a bed of any kind consists of important processes, each of which is described in detail in the instructions.

Base

The assembly of a double bed begins with the installation of the base. The border of the base consists of three frames and a headboard. First of all, you need to connect these kings together. In different models, there are suitable components for this in the form of angles, brackets, corner ties, interconnected with screws and bolts. Next, we attach the legs, they can be screwed separately onto the frames or come as a set with the components.

The next step is to attach the corners and shelves that come with the kit to the top of the tsargi. We align everything in a perpendicular surface and only then fix it to the end with screws. If the bed involves a lifting mechanism, then we mount it at the headboard on the side frames, making the play minimal. After all these preparations, we assemble the base into a single whole and attach the central back to the frames.

Lamella fastening

frame

The main element in the bed is its frame, which is a metal frame equipped with special slats, which in the future will not allow the mattress to bend, thereby providing the sleeping person with support for the spine and a comfortable sleep.

standard model

In the standard model of a double bed there is a base, a frame, a headboard. Many people are concerned about the question - how to assemble a double bed - it is necessary to assemble it according to the instructions. It is not difficult if you have the necessary components and tools, adhere to a certain installation technology:

first of all, with the help of corners, we strengthen the side frames at a height of no more than 0.2 meters;
set the footboards at the same height;
we will assemble the ribs - we fasten them five centimeters above our side frames;
fix the central frame. It is very important to take all accurate measurements, and fix it in the center with the help of special corners.

At this stage, the assembly of the base is considered complete. Another beam is laid on the frame in the center for the mattress pad. Then we tighten the assembled structure to the end with self-tapping screws, maintaining a certain distance of 10 cm. This will achieve optimal product rigidity. Details made of wood can be varnished as a protective coating and after two days you can sleep comfortably on the bed.

Diagram of the construction of a double bed with transverse bars

To assemble the frame, it is necessary to connect all the elements in series. After that, you need to tighten the screws as much as possible. This procedure is best done with two people.

with orthopedic base

One of the most common types of bases for double beds is orthopedic, the main advantage of which is the uniform distribution of the weight of the person sleeping on it, which does not put additional stress on the spine. An orthopedic base is a special-purpose construction that consists of a frame and lamellas. It is intended to provide the orthopedic function of the mattress. The base can be attached directly to the bed or be a separate component.

How to assemble a double bed with an orthopedic base? For greater convenience, only the frame itself is immediately assembled, without lamellas. This will allow you to quickly attach the base to the bed body in the future. Before starting the assembly of the base around the perimeter, all the necessary parts are laid out in the right order. Using screws of the required diameter, the corners of the tie are fixed on the sidewalls of the frame. Next, connect the side frames, the front of the bed (headboard) and the central frame with bolts, but do not tighten them to the end. When all the parts are clearly exposed and connected to each other at a perpendicular angle, you can tighten the fasteners well.

The metal bar is assembled into one product, legs are attached to it. Then we insert it into the perimeter of the base and fasten it tightly with self-tapping screws. For the normal attachment of the slats to the frame, we put slat holders at their ends and fix them in order in special holes on the base of the rod. We check that everything is well kept and the orthopedic base is stable.

Bed with orthopedic base

With lifting mechanism

Instructions on how to assemble a double bed with a lifting mechanism are slightly different from the assembly instructions for a standard model. This is due to the complexity of the mechanism itself. But if you have at least a little experience in assembling and following the advice of a specialist, assembling such a mechanism will not be a problem.

The main difference from the assembly of the frame with an orthopedic base is that special wedge-shaped joints are used to connect the parts.

To achieve the result, it is necessary to insert the necessary parts into each other and press down with force until it stops. With the help of such connections, the parts will hold tight.

According to the instructions for assembling a bed with such a mechanism, it is necessary, according to the sequence, to connect all the parts together with screws, and then tighten them well. The bed frame is attached to the body only by the lower part of the lifting mechanism, which is already attached to it. Due to the bulkiness of the design, it is better to assemble the assembly together, it will be extremely inconvenient for one master.

Then the lamellas are installed. Start from the front of the bed. We insert the part into a special slot, bending it a little. After a characteristic click, the slats are securely fixed in the bar. We also insert all the remaining parts.

headboard

Such an element of the bed as a headboard can be a continuation of the bed or a separate part of it. It can be soft, upholstered with foam rubber, batting, or hard, in the form of shelves that will perform the necessary functions. After buying a bed, it will be possible to redo or improve an existing headboard with your own hands.

There are several ways to upholster a headboard. You can achieve the desired result using the carriage tie technique. To do this, you need a thick fabric, a sheet of plywood, foam rubber, buttons for decoration, a drill. From a sheet of plywood we cut out a blank of the required size, foam rubber of the same size, as well as fabric for upholstery. We fold all the components and put them on the main workpiece. We drill holes in the right places, put buttons there with twine threaded through them and stretch them to the wrong side. We fasten the folds of the fabric and buttons on the wrong side with staples, and close the wrong side with a piece of dense fabric.

Approximately the same methods can be used to make a headboard with an ornament of nails or in the form of soft squares. In some cases, according to the design of the bedroom, it would be appropriate to make a headboard from smooth boards.

A double buildable bed will look great when an advanced headboard element is added to the design, both with a soft look and with a creative approach.

Additional equipment

The bed is the main component of the bedroom set. Sleeping places are located both in small apartments and in large apartments. Today, furniture designers offer more and more new and modern models with various additional equipment.

A box for storing bedding and linen is quite a useful thing. With its help, the problem of disorder is solved, blankets, pillows will be kept in order. If we are talking about a sliding mechanism, such a box should not be very large. Today, manufacturers offer modern models that have a continuation of the front of the headboard in the form of a bedside table. It looks very unusual, original and comfortable. On such a prefix, you can put the necessary small things that you want to always have at hand - a phone, an alarm clock, a favorite book.

Super fashionable beds have different lighting. They can be located on the side of the bed, at the head of the bed and turn on with an inconspicuous button. These fixtures can easily replace bulky floor lamps and wall lamps. They have built-in energy-saving lamps, which will last for a long time, and their consumption will be minimal.

Common mistakes

How to assemble a double bed according to the instructions is not an easy question, even following all the instructions, you can make a number of mistakes that can lead to loss of time, improper assembly of the product. TO common mistakes include:

beginners should not start by assembling massive and large parts. You need to start small, and there will be fewer mistakes;
before starting to assemble the furniture, the number of parts, fasteners is not checked with the instructions, parts of the furniture are not looked through for chips, scratches, damage;
inattentive study of the instructions may adversely affect the assembly process - the parts may be similar to each other, which will lead to their incorrect connection;
headset fasteners may be similar to each other, but used in different connections due to their diameter. And if in one case a long fastener can be used instead of a short one, then a short one will not fit the role of a long fastener;
when assembling parts on a carpet or any other soft surface, you can ensure that some of the parts are lost;
most of the bed parts are made of MDF, and if you make holes with a drill, the panels can burst. Bolts and screws are easily screwed in with a screwdriver;
failure to follow the assembly sequence according to the instructions will cause the double bed with a lifting mechanism to be assembled incorrectly;
if you do not glue some parts with special glue, over time there will not be the desired density between them.

Before each person sooner or later the question arises of how to disassemble the bed. Whether the reason is a planned move or replacement old furniture. Correctly and quickly solve the problem is not always within the power of even an adult. The variety of models and the complexity of the design suggests some problems when disassembling them. Dismantling simple products does not require effort. With "cunning", intricate modifications, it is better to cope with an experienced assistant. The online store "Sleep Therapy" offers to read an article that will be useful.

Dismantle the bed

The simplest design, which should not be difficult to disassemble, is a playpen bed. This model is widely used when a child reaches six months of age. Toddlers by this time begin to sit, take an active interest in the surrounding space, and the playpen is the best option. Usually assembly and disassembly of the structure takes a little time. If there is a wrench and furniture wrench of the required diameter, then it is not difficult to unwind all the joints. The main thing to remember, and for a guarantee, you can sketch or photograph what was installed and where. Some modifications will require the purchase and use of specialized tools.

Child safety is a priority! Therefore, such expenses are trifles. The advantage of disassembling furniture with your own hand is the ability to unload your brain by working with your hands.

Disassemble the bed transformer

Modern manufacturers of children's furniture amaze with a huge variety of different modifications. Of course, one of the most versatile is the bed transformer. Usually it consists of several parts interconnected. The assembly of such a structure is a job for experienced professionals. Dismantling can be done by yourself:

How to disassemble a bed, consisting of a bedside table, a pendulum and a base, with drawers for linen located in it? Partial dismantling is possible. This option is required when it is necessary to set the cabinet at the head of the bed, and remove the base. Using a set of keys, it will not be difficult to complete the procedure;
. transformer options, when the models “hide” into each other, are more difficult to disassemble. Without the relevant experience and knowledge, it is better not to do the work on your own. The help of an experienced furniture maker will come in handy;
. if the assembly instructions are not preserved, then do not despair. You can search for a scanned document on Internet sites, contact a furniture manufacturer (every self-respecting company has a resource on the World Wide Web).

If it is decided to carry out the work on its own, then the bed should be disassembled in a horizontal position, in a certain sequence, using specific tools. If you have instructions, this is easy to do, just follow all the assembly points in reverse order.

Dismantle loft bed

The design of such furniture resembles a transformer, but unlike it has large quantity various constituent parts. The process of disassembling a loft bed is difficult for one person to carry out. But with a competent approach to business, you can save your nerves and time. The most important thing is right choice wrenches. Using a high-quality set will allow you to quickly select the necessary elements for work.

It is better to start disassembly from the top, gradually moving down. Fasteners must be stored in a container or box to keep them intact. Unwinding nuts, screws, bolts requires some physical effort, because the wooden parts can be quite massive. This is where you need an assistant. Sometimes the bed is taken apart in order to wash it or repair damage. In this case, it is better not to touch the main structure. Components, spare parts and main mechanisms must be protected.

Dismantle bed with lifting mechanism

Undoubtedly, one of the most problematic designs for dismantling is furniture equipped with a lifting mechanism. How to disassemble the bed quickly and efficiently? After all, it consists not only of wooden parts and small fastening metal components, but also a specialized system. To save space and rationalize the internal space, it is located on the sides of the base and consists of several iron pipes connected at a certain angle.

Usually the storage space in such a bed is divided into two parts. After removing the upper base, they begin to disassemble the crossbar that separates the base itself. The rest of the steps are not difficult. It remains only to unscrew a couple of screws and assemble all the parts in a box. After self-disassembly, you will need to properly assemble the structure. In order not to make a mistake, you need to follow a certain order, and if necessary, then make your own scheme, photograph each stage.

Conclusion

The advantages of self-disassembly of any furniture are obvious, but you should not forget about the disadvantages. After all, the question of how to disassemble the bed on your own can become unsolvable. Each model has assembly instructions, so before starting work, you should carefully read it. This is the only way to avoid annoying surprises, inconsistencies of various elements, and other troubles. It is pleasant for everyone to do the job perfectly, but if there are no necessary skills, then it is better to entrust the dismantling to real professionals, whose experience and knowledge will help solve the problem in accordance with the technology.

I live with my wife in a communal apartment, the room is quite large, 25 sq.m., but most importantly, the ceilings are 3 m, which, in principle, sowed the idea of \u200b\u200ba loft bed in my restless brain. And now I have some free time and I began to design, invent and design my future child!

Bottom line: the result is something like this, the size of the bed is 1600x2000 mm, the height under the bed is 1900 mm, so even a rather tall person will go under the bed without bending down, to his full height, but on the top, where you need to sleep, there is enough space to calmly sit down and not hit your head on the ceiling and yes, immediately answering your questions, it’s quite comfortable to do it there).

The material of the whole bed, coniferous wood, rolled (with rounded corners) board with a section of 96x36, 146x36 and sanded plywood sheets 21 and 15 mm thick. Himself, so to speak, the principle of the bed, you will see a little later. I will not describe how I was looking for this board in September, October (at the end of the season), but in the end I found it at some sawmill, on the outskirts of the city ... it is sold in 6 m whips. I bought plywood in Leroy Merlin and cut it to size there. But I had to tinker with the boards, since I myself couldn’t trim and mill them according to KDD (Wooden Detailing Structures), as I remind you, I live in a communal apartment, and there is simply no place for this, so I had to look for carpentry workshops that would take up this work . I was looking for a very long time, as it turned out, our people are very lazy and fastidious, they simply do not want to take on such work. But we weren’t made with a finger, so in the end I found guys who decided to help me, and as it turned out I came across very cool carpenters, their workshop is just class, but they live there, don’t believe who ...... RAVEN! CARL RAVEN, the real one!!!

Here he is handsome, pecked my drawings)))

For scale, this bastard gnaws at an A1 format drawing, and this is almost a meter in length !!!

The guys sawed the boards for me, cut some of them and I took them to my house already.

Here you can see that the finished and numbered (paper tape with numbers) parts have arrived. Unfortunately, the details that were milled did not get into the frame, but believe me, they were definitely there))) I personally saw)))

The next issue was painting. Since I was going to paint in my stairwell, for these purposes, after careful selection, the choice fell on Tikkurila Kiva 30 (semi-matte) water-based furniture varnish, I tinted it in two colors, since I decided that I would have a bed two-tone and definitely no other way))) Pasted for a long time stairwell paint film, but the result is obvious, you need to wash off traces of painting after yourself hundreds of times less, and believe me, this is not an exaggeration)))) And I will immediately answer those who asked themselves a logical question: “Why didn’t he then order the painting of parts in the same carpentry workshop ?" - the budget for the bed was limited and the guys from the workshop asked for a pretty good amount as they paint enough expensive materials and only in spray booth, there, of course, the quality of the product will immediately be different, but I decided that for the first time the production of such a bed, and, in principle, to improve my experience, I will paint it myself.

I painted in two layers, the first layer dried within 2 hours, so I coped with all the details in 2 nights, and this is almost 45 sq.m. painted surface, and yes, I painted at night so as not to disturb the neighbors, by the way, there is practically no smell from this varnish, it smells like water-based paint. After complete drying, it looks very beautiful, the texture of the wood is preserved and, according to the manufacturer, the varnish even protects the furniture itself from shock loads.

So, when all the details were painted, it was already necessary to assemble this miracle of "engineering", but as it turned out, there were some difficulties associated with my vision of the future bed: I wanted that, in principle, no fasteners were visible on this bed. ... but scrolling through the many options for assembling this bed in my head, I came to the conclusion that I can hide most of the screws, and some screws will still be visible and nothing can be done about it ..... And stop looking inquiringly into the monitors of your gadgets, now you will understand everything)))

Some part of the frame has already been assembled here, and as you can see, the bed posts are conceived from three rolled boards with a section of 36x96 mm, different color brown-white-brown (there is not enough facade board here yet).

On racks Brown, holes are milled, for boards with a section of 36x146, these boards are the future basis for attaching the log, on which, in turn, sheets of plywood and the mattress itself will lie. In this photo, the attachment point of these boards is clearly visible. The end boards of the same section, in the literal sense of the word, are stuck into the racks and have notches at the ends to support the facade horizontal boards. On top of all this disgrace, the third board of the rack is screwed and secures this "intricate" knot.

This is what the finished bed post looks like, this is the back bed post that will stand against the wall and will be fixed with reinforced corners on the ceiling and on the floor. I’ll tell you right away why I didn’t fix the bed to the wall, but confused it with longer racks ... the fact is that the wall near which the bed should be, in principle, is not a wall, but some very flimsy partition and no matter what kind of attachment to it I would didn't, it would still be unreliable.

Here is another photo of the finished rack, but during the assembly process, before tightening the screws, I always tightened the boards with clamps, since the rack is a pie of three boards and none of them is perfect and still has some kind of deformation, in one way or another side, or even goes with a screw ... then for a snug fit of the boards to each other, it was necessary to pull them together like this.

In this photo, the future staircase is already beginning to take shape, I refused the vertical staircase at the design stage, they are not very comfortable ... well, it’s like for me ... everything can be different for you))) The supporting frame is already fully assembled, but it still walks and can turn from a rectangle into a parallelogram, well, if you look at the plan (from above), the necessary rigidity of the bed will be given sheets of plywood in the future, but for now we have what we have))) And yes, I’m assembling the bed not on her future place, but just in a free place in the room, in the corner of the photo, if you notice you can see a mattress and a laptop on it, I looked at the drawings in parallel when I assembled the bed.

Unfortunately, there is no photo report of how I assembled the stairs, but I suffered enough, as I assembled one. I somehow managed to mark the steps alone, but with the placement of the second bowstring ... uuuh .... not to say a word, not to describe with a pen))) The photo also shows the already mounted logs and laid sheets of plywood 21 mm thick. ... And of course, two of my animals, a Maltese and a Yorkie, are languishing in the arena, their future home will be there.

Actually, the loft bed itself in all its grandeur))) Under the bed, the interior has not yet been furnished, but everything is still ahead! You need to sleep with your feet to the stairs, and at the head, if you look closely, a sheet of plywood is installed vertically, so to speak, a wall for support, and of course there is a small shelf with sockets for charging the phone and sides so that the same phone does not fall from 3 meters height)))

Well, as I said, an already made house for dogs)))

But in fact, the end result of my long labors, it turned out a bit dark, of course, but in principle, in general, the picture is visible)))

All price tags are slightly rounded for easier calculation.
- Boards purchased at the sawmill - 11,500 rubles.
- Delivery from the sawmill to the workshop - 2000 rubles.
- Facing and milling boards (turning them into parts) - 8000 rubles.
- Plywood and cut it into parts - 3400 rubles.
- Delivery of plywood home - 600 rubles.
- Furniture varnish with tinting - 8000 rubles.
- Any small things (screws, corners) - 500 rubles.
- Delivery of parts home - 1000 rubles.
- Own work - PRICELESS!)

Total: 35,000 rubles.

For comparison:

A somewhat similar bed in Ikea, to be more precise Sturo (there were mentions about it in the comments) costs almost 30,000 rubles, but if you saw it up close, you will understand that this money is very expensive to pay for it.

Carpentry workshops that undertake the manufacture of such beds, according to my project, rolled out a price tag of 60,000 rubles. and higher.