We make a rack for storing garden tools. Ideas for storing garden tools and tools How to store shovels and rakes in the shed

Over the years of gardening, I have accumulated a large number of various equipment for working with the ground. The issue of storing garden tools in the country has become relevant. Before, I did not think about it, I left shovels and rakes on the street under the open sky. But this attitude to inventory leads to early wear and tear. Then I thought about the storage place for garden tools, equipped with my own hands.

Wintering inventory

Proper storage garden tools in winter - a guarantee of it long service. In late fall, when gardening and vegetable gardening is nearing completion, prepare your tools for the next season.

Clean off any visible dirt and grass, then go over the surface with a rough sponge. Forks and shovels fill with water with the addition laundry soap or dishwashing liquid and leave for 20-30 minutes. Wipe dry and leave to dry outside for 2 hours. Loose cuttings are reinforced with wedges or winding fabric. Sand the wooden handle itself and varnish it. This will help you avoid splinters, and the wood will not exfoliate from moisture. A complex tool (secateurs, scissors), if possible, disassemble into parts, lubricate and assemble back. Dull parts must be sharpened and greased before winter to avoid rust. Store knives and sharp tools in sheaths or sheaths.

Of course, it is best to build a miniature house for garden tools, which can become not only convenient place for storage, but also to decorate your site. But if this is not possible, then a garage or barn is perfect for storing inventory. The main criteria for choosing a room are dryness and ventilation. If you use a garage, pay special attention to the fasteners so that the tools, if dropped, do not scratch the car.

How to store the instrument?

This simplest design has only one drawback: it is difficult to get to the tool in the middle.

For storage of small tools sew a fabric or plastic organizer with pockets.

Such a device for storing garden tools will help not to lose small tools (scissors, pruners, scoops) and necessary things (gloves).

Creative Storage Ideas

Choosing a place to store garden tools is partly a creative task. If a staircase leads to the house, you can arrange a storage of large inventory under the porch, and make drawers for small things in the steps.

An excellent cabinet for garden tools will turn out from a bench.

And if you remove the railing and the back, we get a comfortable lounger. Or a planting area. Or dinner table. Don't be afraid to fantasize! And then an inconspicuous toolbox will turn into a multifunctional, eye-pleasing storage system.

Often people just store things in a garage, in some room, in a shed. You can find everything there: garden tools, old furniture, spare parts. If you leave it like that, then you will need to spend a lot of time every time to find the right thing. Therefore, summer residents came up with special ways storage that makes life easier. This article tells about the storage of shovels and rakes in the country.

Wall Mount System

This is one of the most the best options storage of tools, as it allows you to place a large number of tools in a small area. Differs in simplicity, cheapness, big universality. The wall fixture can be attached to the shed for shovels, rakes. The system consists of a grid (sold in the regular market) and hooks on which inventory is hung. You can also make wooden holders and attach them to the wall.

Wall mount for tools

Garden toilet for tools

Since the room is high, it is well suited for rakes, shovels, choppers. You can also nail hooks on the toilet door, hang shelves on the wall, put tool boxes. For these purposes, household blocks are often used.

If there are a lot of garden tools, then it is better to use the traditional method - storing shovels and rakes in a shed, where you can build storage cabinets, put baskets for small things or special metal structures for heavier things.

How to store garden tools

Storage lockers

If the option with a garden toilet is not suitable, then you can make lockers yourself. The advantage of this option is that you can choose the number of shelves, their height, the presence or absence of hooks.

You can also make a locker on wheels, which will allow you to easily change its location. Everything you need to create a locker is purchased in specialized stores.

A rack for shovels, forks, rakes, cuttings is another storage option. The sequence of its manufacture:

Nail the crossbars to two boards: one - from above, the other - from below (the boards should be in the center of the crossbars).
Make a bottom box for the stability of the tools in the cells.
Nail supports from the ends to the box and boards.

Such a stand for shovels, rakes takes up little space.

Tool cabinet

Baskets for small things

You can use boxes that are made of whole piece metal. Nothing will fall out of such boxes, and if you add an inscription, it will be easy to find the necessary inventory. Mesh baskets are used for rags, gloves. Storage for small things can be a container from under something (for example, a coffee can).

Advice! Tools and containers must be washed, cleaned and disinfected.

Sturdy metal structures

Heavy tools are stored on metal shelves, so it is best to use welding to fix them.

The sequence of creating a metal structure:

Make drawings.
Take care of the elements of the frame - the usual corners.
Cut out the frame elements with a grinder, and then weld them. Do not forget to check the right angles between the mounts, racks.
To make shelves from perforated or rolled steel (thickness - 1-5 mm).
At the end of the work, the rack should be cleaned of rust and painted.

It is better to place such a structure near a solid wall, which would be a support, carry part of the load. Often a metal structure is combined with wooden materials to make it easier.

So that outdoor furniture does not take up much space, it is attached to the wall with brackets.

Note! Metal products do not rot or ignite, they are the most protected from chemicals, and the value of humidity and temperature does not affect them.

Preparing a garage for a lawn mower and walk-behind tractor

The room should be room temperature(approximately +22 °С), humidity - no more than 70%. You need to position the device so that the wheels do not touch the floor. The equipment must be stored in the working position, i.e. horizontally, otherwise the air filter may be flooded or oil may leak.

It will be good if the lawn mower (walk-behind tractor) is covered with a soft cloth cover. Should not be nearby chemical substances for cleaning, as their aggressive compositions can cause severe damage to parts. Old rakes, shovels must be removed so that they do not fall on the walk-behind tractor.

Advice! A lawn mower garage can be made from a dog house.

How to store shovels in the country

Tips for storing shovels and other similar garden tools in winter:

Clean off dirt.
Dry in the sun.
Sharpen the shovels and then put them in a bucket of sand.
Lubricate cutting tools with oil.

There are quite a few options for storing country tools. It is not necessary to call the master, everything can be done by yourself. If you try, these designs will last a long time. Tips on how to properly store shovels, rakes will help save time and money, save appearance tools.

Most often, the summer resident's garden tools occupy the entire usable area of the shed: "the storage space is meter by meter, and everything is lined with shovels, choppers and rakes - you can't get through." Let's see how the most accurate and organized FORUMHOUSE users have arranged the storage of shovels and rakes, trimmers and other devices.

Do-it-yourself garden tool stand

It is easy to make such a stand with your own hands. First, calculate how many cells you will need to store your shovels and flat cutters. Nail the crossbars 40 centimeters long and 6 centimeters wide to two boards: one on top, the other on the bottom. The boards should be in the center of the crossbars. Make a lower box (it is needed both for the stability of the structure and for fixing the inventory in the cells). Supports, boards 70 centimeters high are nailed from the ends to the box and the grate.

If you are too lazy to make a stand, you can buy it: plastic racks for storing equipment with long cuttings of various diameters are sold in many gardening stores.

Some, by the way, use upturned beer crates, insert shovels, pitchforks, etc. into it.

All these coasters do not take up much space, but they do take up some. Therefore, many users of our portal prefer a different approach to organizing the storage of shovels and flat cutters: when some special space is not created, but existing walls and ceilings are used. To do this, holes are made on all the cuttings and laces are tied to hang on nails under the ceiling, special semicircular devices are nailed to the walls for storing hoses and extension cords, etc.

Stayer4x4 FORUMHOUSE user.
Moscow city.

I recommend mastering not only the floor surfaces, but also, if possible, hanging the tools on the walls. Through the block it is very convenient to lift bicycles during storage, you can also hang chainsaws on various hooks, garden vacuum cleaners, petrol and electric trimmers.

"Grip" for the trimmer

TigraOSP figured out how to store a gas trimmer - a thing "very horny to store." The device of the shelf in the store prompted him to decide: there should be such a protrusion of two “bars” with a semicircle at the end, similar to a grip for a Russian stove for a cast iron. The hook-shaped hanger was welded to the size of the trimmer, put on a rubber hose to avoid scratches on the trimmer, and nailed almost to the ceiling.

TigraOSP FORUMHOUSE user

Hanging and not noticeable, just class. He came up, took the shaft, lifted it, took it out of the grip, and here it is yours.

Organizers for garden tools

We will show you several examples of counteracting chaos, allowing you to keep garden equipment in excellent condition for a long time, brought to life by the users of our portal.

Pirmid built a shed and set aside such a special compartment in it with a separate entrance for entrenching tools and other small things for the garden. “After a futile attempt to fish out of a twisted pile of pitchforks, this design was born.”

na zzz also arranged a small room for storing garden tools and tools. The staples are from a hardware store, the bars, hooks, and drawers from a hardware store.
Now storing shovels in the barn on a hanger looks like this:

Here is another inspiring example - a rack for shovels and rakes:

PVC pipe niches

FORUMHOUSE user Limmpopo offers such an option for storing inventory: all garden "adapters" stand on the line in special niches made of PVC pipes.

Everyone liked the idea: simple, but how beautiful! But - not so convenient. To insert a shovel or rake into such a rack, they need to be raised almost to the ceiling. FORUMHOUSE has improved this know-how: a cut is made in the side of the pipe, which, by the way, will allow you to insert a tool with a handle on the handle into the rack. You can make something like a fastener: cut a strip from plastic bottle, fix one side of it motionlessly on the wall, and make a hole in the other. He put the tool against the wall - "fasten the loop into a carnation on the second wall."

Another idea, for really pedants: make notches at the bottom, limiters from the sewer with a diameter of 50 millimeters, and put the tools not upside down, but with the working edge down. Then exactly, as if by a string, they will stand not only in the picture, but also in reality. By the way, you can try to make such racks from plastic bottles.

Here's how else you can store any garden tools on long cuttings in the country. The simplest do-it-yourself stand: two brackets, one is tied with a string with a carnation at the end - an invention Anna Sokolova. Tools neatly stand in a corner, do not get underfoot, and are easily removed as needed. And best of all, they take up very little space!

Storage of small tools

It is convenient to store small garden tools in these bags:

Or hang it on metal rails with hooks (they are more reliable and cheaper than plastic coasters).

And here is just brilliant. design idea: small garden tools, all these shovels and rippers are hung by the teeth of old rakes, which, in turn, are hung on a carnation driven into the wall.

Room for garden tools

In general, the storage system for garden tools is highly dependent on the room. It's one thing if you have at your disposal half a garage or a change house specially built for this purpose, and another thing if all you and your tools have is a corner under the stairs measuring a meter by a meter. “First, the premises, then bringing beauty and convenience to the placement of such buckets, shovels, pitchforks, rakes, etc. that we need,” they say at FORUMHOUSE. Yes, at Stella777 for tool storage separate room- continuation of the kitchen, but with a separate entrance. Stella777 she sheathed the walls with clapboard, varnished, bought hooks and shelves in hardware stores and now has “order and a free approach to tools.”

Another important point A: Before putting the tool back in place, most FORUMHOUSE users clean it or wash it. If you clean the shovel even after simply digging the ground, wash the flat cutter under a tap or in a bucket of water, over time you will develop a wonderful habit of keeping your working tool in order.

We offer you our article about unusual, but effective, a video about novelties in the market of garden tools, a discussion on the topic: "garden tools: what to choose."

Over the years, every gardener has a whole arsenal various tools. Therefore, the question inevitably arises of how to properly ensure the storage of all this wealth. And this wealth is considerable - shovels and flat cutters various kinds, rakes and scythes, choppers and pitchforks - and this is far from being a single copy. And to this is added an abundance of small tools in the form of secateurs, rippers, various spatulas.

In today's article, we intend to offer you some ideas on how you can conveniently arrange and save garden tools by creating some simple but convenient devices for this. We do not want to burden you with our verbosity, since the photos below show in an exhaustive way what these devices consist of. Moreover, these photos will allow anyone home master easily build something like this.

To give the article some structure, let's divide the storage fixtures by the orientation of the tools installed in them.

Horizontal Storage Accessories

Horizontal storage of garden tools can be provided with the help of structures resembling a Swedish wall.

Storage for tools in the form of a Swedish wall

Another version of the "Swedish wall"

The composition of these devices is elementary simple: bars with notches, mounted on the wall, provide retention of tools and unhindered access to them. Comfortable? Undoubtedly! But there is also a drawback: there may not be even a piece of free space left on the wall.

However, the possibility of horizontal storage is not limited to this. And why not fix such a “storage” directly under the ceiling, as shown in the following photo:

Device for storing garden tools under the ceiling

By storing garden tools under the ceiling, precious space is saved, which is within easy reach of the gardener and householder.

Vertical storage

The device for vertical storage of inventory looks much simpler. The place of its installation is also a wall.

Tubes for vertical storage of instruments

Another option for vertical storage in tubes

Vertical storage by hanging

Shelf for vertical hanging of large inventory

A device for vertical storage can also be equipped outside a barn, bathhouse or other building located on a personal plot.

Vertical storage of tools on the outer wall of the building

As you can see, the mounting options are quite numerous: instruments can be hung or placed in tubes.

The advantages and disadvantages of this method are similar to the previously described "Swedish wall": all the tools are in sight, they are easy to get and put, but they take up quite a lot of space on the wall.

Storage for tools in the form of boxes

Such storages are more economical because they take up much space. less space. Drawers can be used to store garden tools various designs having various compartments inside.

Drawer with sections for storing tools

Box with drilled holes

The disadvantage of such designs is difficult access to the tools located in the middle. In order to get them, you have to pull them out of the box. big number neighboring.

So, above we talked about large instruments. But the arsenal of gardeners is far from being limited to them.

Small inventory storage devices

To conveniently store such small inventory as secateurs, baking powder, spatulas and similar tools, you can build shelves like this:

Small tool suspension option

But you can not complicate your life and simply stick these tools into a container filled with sand soaked vegetable oil. It is vegetable, and not machine, in order to avoid the likelihood of the latter being introduced into cultivated soil.

Hose storage

When thinking about storing inventory, don't forget about watering hoses. Hanging them on thin holders is not recommended. Under their own weight, they can sag, forming a kink that makes it difficult for them to further use. An example of a hose storage device would be this one:

Hoses should be stored in such a way that they do not become kinked.

An old pan or bucket, fixed with the bottom on the wall, can be a convenient support for hanging a hose, and their internal cavity can play the role of a kind of shelf for laying any little things on it.

How much does inventory storage cost?

It is quite inexpensive. To create such storages, you can use the lumber or trimmings you already have, or purchase them on the construction market. Any home craftsman knows that the cost of raw lumber is very low, even if they are purchased individually.

We will be glad if you tell us how you organize the storage of garden tools. You can leave your comments below.

In the video below, you can see how to create a simple wall bar inventory storage.

With the onset of heat, gardeners and gardeners take out tools and a variety of household equipment from sheds and pantries. In the midst spring work everything that a summer resident needs should be at his fingertips. There is a constant need for shovels, rakes, shovels, pitchforks and secateurs. On the one hand, they need to be as close as possible to the place of work. On the other hand, I don’t want the neat view of the site to be disturbed by objects scattered around! There is only one way out: you need to determine and equip a place for summer storage of tools. Yes, and in winter they also have to be put somewhere in order to fully meet the new holiday season.

The aesthetics of open space will not be violated if you use one of the proposed ideas. convenient storage tools. Everything you need will be at your fingertips, but not in front of your eyes.

Space under a terrace or porch

If at the stage of designing a house you provide for even a slightly raised or, consider that you have already determined the place for shovels and rakes. It is enough that the structure is at least half a meter from the surface of the earth. The greater the distance from the ground and the length of the same terrace, the wider your options.

The free space under the terrace is well organized. Even the steps of the stairs are converted into drawers that can store a wide variety of little things.

You can simply close the space by providing it with an aesthetic door. You will get an original barn, which, by the way, will additionally strengthen the terrace. If there is not too much space under the porch, it is better to limit yourself drawers, turning the side of the porch into a kind of chest of drawers. In this case, the design should be chosen according to your own taste, it is only important that it matches the general style of the buildings.

Another option for creating a utility room under the terrace of the house. It can accommodate not only garden tools, but also a bicycle, for example, or a small boat

A garden bench would work too.

Typically, the space garden benches no one is particularly interested. And we will fix it and will not let it be empty. Let instead of the usual bench we will have a box in which we will put the tools.

At the same time, the general aesthetics of the site will not suffer in any way, but the space under the bench, where it is so difficult to mow the grass, will be put into action. Secateurs, shovels and hoses can be stored directly next to where they will be used.

This bench does not look like a storage for tools, but it is used that way. Outwardly similar to a fashionable sofa, it is multifunctional

We build a special box

Now let's do it differently. First, we will calculate the box with what parameters we need so that all the inventory can easily fit there, and then we will think about what other functions it could perform on our site.

Such a wooden box is sure to find some more useful application in the economy. For example, you can grow seedlings on it or use it in the gazebo as a dining table.

Let's say we make a container with sliding shelves or with a hinged lid, or even a combined structure in which the boxes are located below, and the space for shovels, rakes and choppers is on top. It turns out a rather voluminous structure, which can be used as a table for growing seedlings, a lounger or a place for children's games.

Original design in the form of an obelisk

A decorative detail on the exterior of your home can be a very useful structure at the same time. It would never occur to anyone that brooms and shovels are located right here, this design looks so neat and natural.

Who would have thought that in such a neat and inconspicuous hiding place the owner hides shovels, shovels and rods? Yes, there is also an air conditioner hidden in the lower part of the obelisk.

The lower part of the container can be occupied, for example, by an air conditioner, and tools with long handles will be placed on top. You can also put fishing tackle here, which also needs storage space.

For the essentials

However, not all garden tools are large. Sometimes we need little things like secateurs, skeins of twine, gloves, shovels and pegs. Where to put all this, so as not to look for a long time? For them, a birdhouse should be built on a stand corresponding to the growth of the gardener.

This is a real illustration of the expression "everything is at hand." The board is intended for information that the gardener must not forget. For example, dates of vaccinations can be marked here.

It can be an independent storage or an original addition to a large utility room. In any case, in such a "house" every little thing will lie in its place. And just write down the necessary information with chalk on a blackboard with inside doors.

We use suspended structures

For curly flowering plants, cucumbers and grapes often use different supports. On them vertical surfaces It's easy to make some kind of fasteners like hooks. With their help, it will be possible to hang all the equipment that is unnecessary at the moment. In fact, it is at the same time in plain sight, but it is either not noticeable, or it will look neat enough.

Take a good look at the pillars, because the inventory placed on them is actually almost invisible

If the climate in your area is dry, this method of temporary storage is very useful. If it often rains, then you can stuff hooks on the wall of any outbuilding, which is reliably protected by an overhanging roof. However, you can transform the entire outer surface of the wall into a kind of organizer. We will talk about its construction below.

Aesthetic cylindrical posts

If in the process construction works do you have scraps of metal or polypropylene pipes, do not rush to part with them. Having fixed them in a quiet corner somewhere behind the house or behind the gazebo, you can store all the tools with handles in them. Each item has its own place, which makes it easier to access it later.

The only thing that is alarming in this way of storing inventory is the forks, the sharp teeth of which are directed upwards. It remains only to hope that this design will be located in compliance with safety regulations.

We make a shelf with our own hands

There are a lot of ways to make a simple do-it-yourself tool shelf. We bring to your attention one of them. For the base of the shelf, we need one board over 1 meter long and 40 mm thick. In addition, we will prepare the remains of boards, planks, as well as identical triangular plywood trimmings.

We take plywood triangles and on each of them we cut out a groove with an electric jigsaw corresponding to the board that we prepared for the base of the shelf. We fasten the trimming strips to the triangles with self-tapping screws, cut off their edges. Now each triangle is a console.

This shelf is easy to make: it makes no sense to buy new materials to create it, you can use those left over from previous construction work

Using self-tapping screws, we fix each console on the base board so that shovels, rakes and other tools can be hung up with the working part up. Between the consoles should be inserted trimming boards or chipboard. This will give general design the required rigidity.

I must say that the finished design is quite heavy. To fix such a shelf to the wall, you need an assistant who will support it. If the master works alone, then it is easier for him to initially fix the base board, and only then screw the consoles and elements that provide rigidity to it.

The only difficulty is the weight of the shelf itself, which will be a problem if you have to fix it to the wall alone, but in this case there is a way out

Another option involves fixing finished construction with one large nail, and then the final installation with self-tapping screws. At their locations, you can pre-make through holes. The resulting simple shelf collects the entire basic inventory.

Garden organizer made easy

For a simple garden organizer, we do not need extra effort and significant financial costs. Everything is pretty simple!

We will need four edged boards 25 mm thick. They need to be prepared for work - trimmed. The figure shows where the holes will be placed on the two boards. Let's mark them. Using a feather drill, we will make holes according to a preliminary basting and, then, with an electric jigsaw or a simple hacksaw, cut out the side cuts.

There is nothing complicated in assembling such an organizer. The message of the simple process is reflected in sufficient detail in these figures.

We connect the boards in pairs with self-tapping screws to get two L-shaped structures. Now we have two vertical posts. We choose the wall on which our organizer will be placed. Let it be, for example, outer wall any commercial building. Racks need to be screwed to it parallel to each other at a smaller distance than the length of the shovel handle.

Why not brag about such a worthy result of work? It's always nice when the tools are kept in order. With a clean inventory and work will be more fun

The work is over. It remains only to place all the inventory in the organizer and be glad that it will always be in order.

When the summer season is over

When the cold weather comes and the work in the country is curtailed, it's time to conserve the tools that have served us faithfully and send it to storage. If we follow all the rules, in the spring we will not have to spend money on buying a new one. Spring costs are already high.

We send gardening equipment for storage

All shovels, choppers, rakes and other gardening tools should be mothballed. We will carry out their initial inspection and repair everything that has managed to break down during the working season. Dirt and rust must be removed. Cleaning is best done with a wire brush or spatula. Lubricate the cutting edge and metal surfaces oil.

Do not leave tools dirty and unlubricated for the winter. All the same, in the spring you yourself will have to do the same work. And in the spring, as you yourself know, there are a lot of things to do without it

It is necessary to sharpen the blades of the lopper and pruner. To remove notches on the blade of a lopper or garden saw, use a file. Secateurs for the same purpose better fit grindstone. You also need to take care of the wooden handles. They are also thoroughly cleaned, after which they are abundantly lubricated with ordinary sunflower or linseed oil. Soaked in this way, the handles will not dry out and will last a long time.

Particular attention should be paid to the fertilizer sprayer. It is cleaned, thoroughly washed and dried. All levers and fixtures of the device are thoroughly lubricated with machine oil. Release the hoses from the remnants of water, roll into a ring and hang on the wall. They should only be kept indoors.

Rules for storing electrical equipment

well equipped country cottage area cannot do without electromechanical inventory. In preparing it for winter, the following steps are necessary:

draining all excess fuel;
engine oil change;
checking the presence of fasteners (brackets, plugs, screws) and making up for the actual shortage.

Require mandatory check and power cords. If the integrity is broken, it is better to change them for new ones. The trimmer head is cleaned, washed and dried. Mower knives are sharpened and lubricated. Both the electric shears and the grass chopper need cleaning. All knives, metal parts and movable swivel joints of various units must be cleaned and lubricated.

Any electromechanical devices need careful maintenance. But the life of a gardener and gardener is greatly facilitated if he has them and is in good condition.

In no case should the tool be left where it can get wet with rain or snow. Even moisture from fog negatively affects its operational properties. The ideal place for storage would be a special utility room. If there is no such room, a workshop or even a pantry in the house will do. Carefully conserved garden tools will successfully survive the period of lack of demand and will not let their owners down in the spring.