Street benches with their own hands. Garden benches (59 photos): views. Features of wooden, metal and combined, stone benches. Board benches

With the onset holiday season hardworking summer residents rush to the garden. During the cold months, so much work has accumulated that, perhaps, you will not find such a corner in the country or in the garden where the maximum investment of the gardener's strength and energy is not required. Weed here, dig up there, water here... Of course, with such an intense load, sometimes you want to sit down and relax for a while. And a garden bench is the easiest solution.

Garden bench - garden design object

In addition to their intended purpose, garden benches today can be safely called a real design object and the main attribute. good rest at the cottage or in the garden.

IN last years the direction of spending time in the country has changed markedly. If earlier the vast majority of gardeners worked hard on their 6 acres to feed themselves and their families, now more and more people prefer to go to the country just to relax. That is why the role of the design component of country rest has increased. The influence of comfort and aesthetic pleasure from admiring the landscape has expanded. And garden benches, as one type of small architectural forms, perfectly cope with the role of an artist-decorator.

It must be said that attention began to be paid to the importance in the design of benches back in the Renaissance. Already in those days, the best palace architects gave exquisite forms to the simplest and most familiar shops. And garden benches gradually ceased to be just an object for a respite, but turned into a full-fledged design object, which is part of a large beautiful garden.

In order for the seating area or dining area to emphasize the unique image of your garden, it is important to place garden benches correctly, taking into account the surrounding landscape, topography and the general style of the site.

Styles of garden benches

The style of garden benches directly depends on the style of the house. As a rule, benches appear in the garden, where there is already a main building. So, the stylistic orientation is already present.

For a classic garden, benches made of wood with carvings, wrought iron and stone benches with stucco elements are suitable.
For a country-style garden, benches made of brutal wood with deliberately rough shapes are suitable.
Japanese or Chinese garden will be decorated with bamboo garden benches.
The English style of the garden is emphasized by combined benches - a metal base and a wooden seat.
In a French garden, metal benches with beautiful complex curves will look good.
In the garden natural style benches made of stumps and rough boards will be appropriate.
Unusual benches in the form of a cat or a horse (made of wood or forging) will decorate the garden in a vintage style.

Garden benches are a great tool for zoning a site in landscape design. With their help, you can mark the boundaries of a recreation area or garden room, the beginning or end of a green corridor, etc. The garden may include a terrace, dining area, reception area, swimming pool, playground and other functional areas. In order for each of them to be not only comfortable, but also visually stand out, it is customary to zone parts of the garden. And garden benches, as one of the types of small architectural forms, perfectly cope with this task.

According to the functional purpose, benches can be divided into:

They are usually placed at the entrance to the house. Therefore, the design and material of the front bench should match the exterior of the main house. For example, if next to entrance group there are forged elements (for example, a visor over the entrance, lattices on windows or a flower stand), then a forged bench will look more harmonious. It is wiser to choose the style of all forged products in advance. Strictly following the canons garden design, in all forged products of the garden (from the fence to the trellis) a single pattern should be traced. Therefore, everything is thought out at the design stage.

Dining garden benches. As a rule, such benches are included in a single dining group, which means they must match the design and material of the table. Such benches are placed in the barbecue area, in gazebos, on terraces or in places where the family likes to dine. This area can look grand and serve as a kind of platform for receiving guests. Or maybe home-style is simple and cozy. It is in such corners that quiet family gatherings and tea parties take place.

Garden benches for relaxation. These benches are located in those places where it is pleasant to retire and relax. It can be a secluded corner in the garden or a platform in front of a pond. But the specific location of the bench in this area has its own nuances. When properly placed, the viewing angle provides the observer with the most attractive and beautiful view site. In addition, the bench or bench itself becomes a decoration of the garden and an integral part of the landscape.

It must be said that benches for rest include another subgroup, which is worth highlighting separately. These are the so-called relaxation benches. They are designed for the most secluded corners, away from any irritants and observers. On such a bench, you can even lie down if you wish. Soft pillows with your favorite tune, auto-training or the croaking of frogs will help you relax as much as possible during the hours of summer heat.

Such small benches are located next to the garden, flower garden or flower beds. The name speaks for itself. On them you can relax a little while working in the country. There are no special requirements for the design of "garden" benches. They can be of the simplest form, without decorating frills.

In addition, garden benches are stationary And mobile. The type, material and design of stationary benches are selected more carefully, as they are located in the garden for a long period, and form (including) the final image of the garden.

Main advantage folding benches is their mobility. Folding benches are indispensable for small gardens. They fold quickly and easily and weigh little. The construction of these benches is very durable. And although folding benches may not be combined with the design of the garden plot, it is still impossible not to recognize the fact of their convenience.

As for the external design, the benches can be with or without a back, with or without armrests, as well as with drawers in which it is convenient to store some necessary things.

A bench is considered comfortable if:

Seat width - 50-55 cm
Seat height from the ground - 40-50 cm
Back height - 40-50 cm
Back tilt - 15-45 degrees
The height of the armrests from the seat is 15-20 cm

Material for garden benches

Garden benches are traditionally made of wood, stone, metal, wicker and plastic. The choice of material depends both on personal preferences and on the exterior of the garden. Recently, in the manufacture of garden furniture, materials are combined (for example, wood combined with artistic forging), which makes it possible to most accurately capture the stylistic orientation.

Properly selected furniture always becomes a real decoration of the garden. Otherwise (for example, a super-modern plastic garden bench) will look out of place next to a rustic-style house.

Wood- the most popular material for the manufacture of benches. At all times, the tree looked both beautiful and modern. Harmlessness and durability are the main criteria for choosing this material.

The most durable type of wood is teak. It was this material that was used even in the construction of ships. Therefore, for open spaces with constant exposure to external factors, it is better to purchase teak garden benches. With proper care, they will serve you for many years. Alternative options are oak, pine, larch, hazel.

Even deliberate rudeness looks original and stylish.

Metal. The popularity of metal garden benches is understandable. Metal products are practical, durable and, with proper care, resistant to precipitation. This group includes elegant forged benches, light aluminum and heavy cast iron benches. Each of these types has a number of advantages and is suitable for their tasks.

Aluminum, contrary to popular belief, a very durable material. He does not require special care and is not subject to corrosion. Aluminum garden benches retain their original condition for a very long time. appearance, and thanks to a variety of designs are suitable for different recreation areas.

Cast iron garden benches. Until now, in some parks, old cast-iron benches made more than a hundred years ago have been preserved. This is a very durable, heavy and quite expensive material. Modern cast-iron benches are available with various toning and anti-corrosion impregnations, which can significantly increase the service life. These benches are ideal for parks, squares and large gardens.

This refers to products made of steel by the method artistic forging. In fact, only a specialist can tell the difference between cast iron and forging. Without going into details chemical composition, we can say that forged garden benches are always elegant openwork lines that give any summer cottage sophisticated look. In combination with other exterior elements, a wrought iron bench can literally transform a garden. It must be said that Forged Products can be made in any style.

stone benches. Stone benches look impressive and monumental. The most advantageous stone benches look in a spacious garden. Despite the fact that they are not very comfortable and are not intended for a long stay, stone garden benches are still quite popular. They give the garden a special flavor and hint at the solidity of the owners. The problem with inconvenience is easily solved by placing soft pillows on the bench. In some cases, stone benches are even cheaper than wooden ones.

Plastic. The advent of plastic furniture made a real revolution just a few decades ago. She was especially liked by the owners. country houses. The advantages are obvious - plastic furniture is cheap and practical. It can be left on the street, it is diverse in color and shape. In addition, plastic furniture is lightweight, which allows you to move it to different parts of the garden. If the exterior of your house is made in modern style, plastic garden benches and chairs will look quite harmonious.

wicker benches graceful, sweet, airy, light, but short-lived. They will not last long even if they stand under a canopy. This primarily applies to products made from willow vines. Benches coated with a special varnish will last longer. And yet, there are many fans of such garden furniture. A corner with a wicker bench immediately resembles a French garden or a view of the sea coast.

In recent years, garden rattan benches. This material is much stronger than willow. So, such furniture lasts much longer. Unfortunately, rattan does not grow in our latitudes, and exports from hot countries are expensive. Furniture manufacturers offer artificial rattan products. It is both stronger and lasts longer, as it is not afraid of either the scorching sun or rain.

Also, in recent years, gaining popularity hularo furniture- synthetic rattan. This material based on rubber and other artificial additives is in no way inferior in terms of external characteristics natural. And in some respects it even surpasses natural rattan. Hularo wicker benches do not fade and are not afraid of large temperature changes. Such furniture is pleasant to the touch and very easy to clean - it can be washed directly from the hose. In addition, manufacturers offer different colors, textures and pattern of weaving. No wonder wicker hularo benches are becoming more and more popular every year.

An arch with a bench is a great solution for giving

This is almost a ready-made corner for relaxation. Now on sale there are models of arches or trellises made of metal, wood or plastic. A forged arch with a bench has always been an attribute of grace and aristocracy. On such a bench, you can not only retire surrounded by climbing plants, but also make a romantic date. Curly grapes, clematis, kampsis and a climbing rose are well suited to decorate such an arch.

The bench is functional and allows you to complement the arrangement of the garden. It is usually not used for classic types of vegetable gardens, since there is no need for it.

On this site you can see only beds and growing potatoes, tomatoes, cucumbers and other useful crops. And when it comes to a garden, albeit not a particularly extensive one, then it becomes clear that it is difficult to organize it qualitatively without the use of benches.

Since the garden is created for other purposes, it is necessary for relaxation and merging with the natural atmosphere.

Modern designers have learned to create different versions structures for such purposes. However, wooden and metal benches are considered the most popular.

Types of benches for use in the garden

Any chosen option for the design of a bench or its size should serve one purpose - the formation of a place for a person to relax. Its shape suggests the possibility of comfortable placement for a long time.

Classification of such products can occur on the basis of a number of features. Usually they are associated with the type of material used to assemble the bench.

What materials are most commonly used?

In fact, there are a lot of them, however, you can dwell on the most popular of them. Most often used:

Plastic, since the benches created on its basis are resistant to impacts environment. They offer reduced weight and an attractive price. The market offers folding structures formed by these materials, they are very convenient for moments of stay in the country;

The tree is most often used to create homemade types of benches. It fits perfectly into the interior of any garden plot. Designers refer this material to the classic types that remain in fashion;

Important: Wood has a reduced resistance to moisture and insects compared to plastic, stone products or metal modifications. Because of this, the period of use of a wooden bench will turn out to be the smallest among other options.

Metal allows you to create benches with your own hands based on the use of profile pipelines. However, forged versions based on this material are more commonly used.

The independent creation of such variations is virtually impossible, since this requires blacksmithing skills. Because of this, it is possible to use only purchased forged parts of the sidewalls for self assembly benches from them;

The stone differs in the level of durability. Other materials can not be compared with them for the duration of use. A shop can be formed from several large boulders or purchased marble and side parts. In this case, it is necessary to build on the price of the product and its combination with the general style of the suburban area.

How to create a bench for long-term use?

To do this, you can use a combination of different elements or fundamental material. There are several options to achieve this goal:

Concrete will help to pour durable side parts, and a slab formed on its basis can be used for the seat;

The combination of materials is considered good option, and it is often used to create a bench in the garden. Created by combining a metal frame and wood slats respectively to create a back and seat. And it is also acceptable to combine options for benches made of stone and wooden elements.

Application of the author's design to create a bench

Usually only this direction gives rise to true works of art, it is already difficult to consider them a classic place to relax. For the most part, wood is used for this. Some well-known variations of author's works can be distinguished:

The ring version of the form is created in the form of a conventional structure, however, framing a living tree;
A bench created in the distance between two flower beds;
A bench designed on the basis of the space to graze a large animal;
With the addition of stone statues on both sides of the bench;
A bench based on a bamboo compound with a seating cutout in its central part.

It is worth recalling that the process of creating a garden bench will allow you to go into a creative flight of fancy. This should not interfere with existing designs, since you can still come up with something original.

The information obtained with the help of this article helps to get acquainted with various options and will give some non-standard approaches.

Photo of a garden bench

Each household plot should have several benches and benches with backs, so that in good weather you can relax on the street, sit under the gentle sun and just take a break from working in the garden. You can buy such a wooden or metal bench, or you can just make it yourself. In this article, we will look at what types of benches are and how you can make one of them yourself, having everything at hand. necessary tools and materials.

How are the views

There are a large number of benches with a back and each owner country house or a dacha chooses for himself the option that is most suitable for his exterior personal plot.

Benches are very different depending on their scope.

Ordinary benches with a back are suitable for any personal plot and fit perfectly into the exterior of the yard. They are comfortable and very practical, as they have a simple design and unpretentious in their appearance. Suitable for installation near the house, in the gazebo, near the pond, etc. They can be made of wood, metal, stone, and also be combined (wood and metal, wood and stone, wood and brick, plastic and other building materials).
Corner benches will look great where you can’t put an ordinary large bench with a back. They can be placed in the corners of the gazebo, in gardens, as well as in any convenient location on the homestead. Such benches can be metal, wooden, stone and combined.
Ordinary backless benches can be installed anywhere, as they are versatile and comfortable enough for any country house. They can be easily made by hand, as they are made according to the most common standard drawing of a classic type.
Oval, round or semicircular benches with or without a back will look great in the center of the same round gazebo, in the center of the garden or anywhere else, where they will create an aesthetic exterior for the entire backyard, and also perform their direct functions. Also in the center of a round bench a tree, a green bush can grow, bloom beautiful flower bed or even house a children's sandbox. It all depends on the imagination of the master and the functional needs of the owners of a country house or cottage. They can be made of wood, metal, stone, as well as in a combined form from various natural materials compatible with each other.

Photo gallery: do-it-yourself garden benches with a wooden back - types and designs

Wooden bench with metal legs for the garden Wooden bench with wrought iron legs for the garden Corner wooden bench with brick support Semicircular wooden bench on a brick support Shop from wooden beam garden with backrest Decorative wooden garden bench with flower box supports Classic wooden garden bench with rails and backrest Round wooden bench with backrest for the garden original shop solid log garden Wooden bench on wooden supports natural stones for home garden Wooden bench with concrete supports in the form of flower beds wooden bench with wooden poles in the form of flower beds Wooden bench with wicker back for the garden Stone design bench for the garden Square wooden garden benches

Preparatory stage: drawings, dimensions, angle of inclination

Before you start making a bench for your backyard from any type of material, you need to take all measurements and draw up an accurate drawing of the future design. This is necessary so that it turns out to be even without distortions and rolls. Also, the design scheme will help to calculate the required amount of material for the manufacture of shops of any type.

For the manufacture of wooden structures for a personal plot, pine, oak, birch boards or logs are usually used, as well as pear, hornbeam and durable larch. Almost any tree is easy to process, has excellent decorative qualities, and also fits aesthetically into the country landscape. The main advantage of wood is its beautiful aesthetic appearance. But in the meantime, it negatively tolerates the hit sun rays, high humidity and low temperature(very coldy). Therefore, it is best to install wooden benches in closed gazebos, on terraces covered with tents, or make them portable (collapsible) so that you can clean them indoors (pantry, basement, closet) for the winter.

Steel supports will be the most competent choice for making a bench with a wooden seat and back to place it on the territory of a summer residence or a country house. Such a bench will serve you for at least 15 years, and it will not need to be removed during snow or rain.

How to make a wooden bench with a backrest with your own hands

To make a wooden bench, we need:

Before proceeding with the manufacture of a wooden portable bench, it is necessary to saw the boards into certain elements:

All prepared boards must be sanded, all sides smoothed and soaked well with an antiseptic. Then leave until completely dry.
We mark the height of the bench 40 cm. Starting from the very middle in the upper part of the elements of the longest legs that will hold the back, it is necessary to make an oblique cut at a slight angle of about 20 °. Then all the corners of the bars must be cut and sanded on both sides. In this case, the back will have an inclined shape. The sections must be strictly the same, otherwise the bench will end up skewed and will have an unattractive appearance, and it will be uncomfortable to sit on it.
We collect the legs of the bench. The distance between the legs should be about 28 cm. Front (front) and rear wooden pairs of benches for support with invisible inside it is necessary to fasten with the help of prepared bars and self-tapping screws. We connect the legs with a beam, which we cut to the entire width of the structure - by 50 cm. The strapping is best done double - from above and below.
In order to protect self-tapping screws and screws from premature corrosion, it is necessary to pre-drill the necessary holes and slightly deepen their heads into the board.
On the frame of the bench, as shown in the drawing, at certain intervals (1 or 2 cm), we nail or fasten the planks. Three planks for the seat and two boards for the back. After all the elements are stuffed, it is necessary to check the correctness and evenness of the entire structure with a level. For greater reliability, stability and rigidity, the legs at the bottom are knocked down with planks on both sides. It is advisable to leave gaps of several centimeters between the planks for better air circulation and drainage. We fasten the back (first bar) at a distance of 20 cm from the seat, and the second - at a distance of 38 cm from the seat.
The design of the bench needs to be strengthened and for this it is necessary to make the lower trim of the legs. To do this, we take two beams 1.5 meters long and fasten them to the front and rear legs of the bench frame.

Shop decoration

After completion of all carpentry work, the bench must be completely treated with flame retardant and then coated with waterproof varnish in several layers or with ordinary oil paint.

If you want to make the shop more aesthetic and beautiful design, you can simply saw the boards lengthwise and then stuff them diagonally, crosswise or herringbone.

Making a garden bench from wood and metal

A bench with a back, a wooden seat and strong metal legs, will the best option garden furniture that can be installed in your backyard. Such a design, even in winter, can be left on the street without any problems.

Material calculation and necessary tools

To make a bench, we need:

One iron corner with a shelf measuring 40 - 50 mm;
One beam for the manufacture of bench seats with a thickness of 40 mm;
Special bolts;
Hacksaw or grinder;
Drill;
Screwdriver;
Welding electric or gas machine;
Sandpaper or grinder.

Step-by-step instruction

The metal corner must be cut into four pieces of one meter for manufacturing vertical supports designs. Cut five pieces of half a meter and two pieces of one and a half meters to make a frame for installing a seat and back boards on it.
To make the back and seat, we cut off seven planks from a bar 1.5 meters long and 10 cm wide. We grind them and smooth all the side parts well. Soak all the boards well with an antiseptic and leave to dry completely.
We cut the ends of the joining parts from iron corners exactly at an angle of 45 ° and then connect them in series using hot welding. To begin with, we make a frame for the seat device and weld the iron legs well for subsequent attachment of the backrest to them, as well as the stops. In the process of welding, it is necessary to use protective equipment.
In the boards of the seat and back, where the fasteners will be, it is necessary to drill holes for special bolts. After welding metal structure it is necessary to grind well in places of seams in order to eliminate all irregularities and tubercles. Then treat the metal with a special anti-corrosion coating and oil paint in two layers.
We bolt ready-made back and seat boards to the finished metal frame. We pre-impregnate the boards with a flame retardant (preferably saline) and then cover with a good layer of water-repellent varnish or colored paint.
On the ground, it is necessary to make markings for the legs. To do this, it is necessary to dig four holes about 50 cm deep and pour river sand (about 10 cm) on the bottom, and fine gravel (about 20 cm) on top. Upstairs we lay pieces of roofing material and put a reinforcing mesh. We install the legs of the bench in the pits and check the horizontal evenness of the structure with a level. Then we fill the legs with concrete (the ratio of sand and cement is 3: 1).
If you plan to put a bench on a regular asphalt or paved surface, then you do not need to make a concrete foundation. The legs of the structure are made from four pieces of an iron corner about half a meter long. For greater stability to the bottom of the corners, it is necessary to weld square "heels" or strengthen the entire structure with the help of a lower metal frame.

Finishing

All metal structural elements must be treated with anti-corrosion agents and primed. Then paint with regular oil paint.

We impregnate wooden elements with special antifungal agents, flame retardant, and then paint with waterproof varnish or colored oil paint.

If desired, the metal parts of the bench can be decorated with various wrought iron patterns, which can be forged on your own or purchased ready-made from special firms.

Bench for a personal plot on brick supports

Material calculation and tools

To make a bench, we need:

building brick;
Wooden boards (thickness about 40 mm);
A pack of self-tapping screws and screws;
Several bags of cement, fine sifted sand (6 bags or more) and gravel.

step by step

On a stone-paved and concreted area, the bench must be placed on a cement foundation. On soft ground, it will be necessary to make a columnar foundation.

We carry out the marking of the territory for the installation of brick racks and remove upper layer soil (turf). We dig holes with a diameter of 20x20 cm and a depth of about 50 - 60 cm for the foundation. At the very bottom of the well, we pour sand 10 cm thick and crushed stone 20 cm thick on top. We tamp all this well, pour a little water over it and leave it for a day.
We put several pieces of roofing material on top and place a bunch of five reinforcing bars in the hole. All this is poured with concrete and allowed to harden for about three or four days. For concrete mixing, we take cement, sand and fine gravel (1:3:5).
We put a small layer of liquid concrete (1–2 centimeters) on the prepared foundation. This will be the basis for the future brick decorative base. Next, we begin to lay a brick with dressing. The masonry is made necessary for the construction of the width, that is, such as the shop itself will be or a little narrower. The height of the brickwork should be about 50 cm. Inside the masonry on the top row, we leave a place to form a shelf for the subsequent installation of a bench seat.
We fasten the seat boards together with the help of a board and self-tapping screws. Then we install the finished bench on the prepared brick supports. We impregnate the tree with a flame retardant, let it dry and cover it with a special water-repellent varnish or colored paint.
Also, depending on how long the bench will be, it will be necessary to make several brick supports. Corner or figured (semicircular, round, oval) structures are best installed on a solid brick base, which will be located on a tape-type foundation.

Shop decoration

We treat all wooden planks with antifungal agents and flame retardants, and then prime and cover with waterproof varnish or ordinary oil paint. Brickwork does not need additional finishing, as it looks quite beautiful and aesthetically pleasing by itself. If you still want to make it a different color, you can also paint with oil paint.

Video: how to make a bench for a country house yourself

If you make a bench made of wood and metal with your own hands, you can enjoy the fruits of your labor for many years and relax on it in the shade of fruit trees. With proper and timely care for such a wooden bench with metal or brick supports, it will serve for many years. But in order for it not to suffer from heavy rains or snow in winter or autumn, it is best to clean it indoors, if possible. Regular care can significantly extend the life of your bench in the garden.

If you are thinking of building a bench in the country and want to go beyond the ordinary and create something truly unique, then you are in the right place. We have compiled for you a selection of the most original and unusual designs of benches and benches that you can make with your own hands. Moreover, we will show you how the benches are made in the photo.

The most common benches are wooden. And this is not surprising! Wood is the most affordable material for building a bench. The variety of designs here is truly huge! We will give you some examples.

To create such benches, you can use the remains of the cut garden trees. both trunks and thick branches will go into business.

Left in small pieces scaffolding? Having made benches out of it, you will get a beautiful and reliable option.

Even short cuts of a wooden beam can become a unique garden bench in skillful hands.

Easy to make from quality material, even if it is a little. But even from improvised materials, such as, good garden benches are also obtained, as in this photo.

It looks like a bench can be made from any wooden structure. These are made from wooden spools of cable.

It is hard to imagine that you have unnecessary items in your household. wooden barrels in a good condition. If yes, then here is the garden bench option for you.

Funny garden bench from one log.

If you do not buy a ready-made bench, but make a bench with your own hands, then you have a chance to give it a unique look with very little effort.

Your bench does not have to be completely wooden. Here is a popular simple bench design made from building blocks and wooden blocks.

Probably, most of us would simply throw out the old unnecessary boat, but there are people among us with the ability to see beauty literally in the trash. The bench from the boat in the photo is just wonderful. It may not be very comfortable to sit in it, but you can sit in Turkish. But even looking at such a bench is nice.

Bench for the most daring.

Often beautiful benches do not have a complex design. In this case, individuality and your personal attitude to the garden are more important.

We offer you four basic bench designs, based on which you can create your own amazing and unique benches, which are not yet in any photo.

Small wooden bench: photos and instructions.

This simple bench in the photo is made from just a few planks. These used to be often made in villages for everyday use. It is stable, and most importantly - it is easy to carry from place to place. Such a bench will serve both in the house, and in the kitchen, and in the yard. However, it does not require high costs materials and is very easy to manufacture. The most difficult thing is to make neat cuts in the boards at an angle to get the legs.

It may seem that the sides in front and behind are clean decorative element, However, it is not! It is they who give this bench rigidity and stability.

Therefore, in one form or another, they are present in the design of each such bench.

Sometimes, however, only one such stiffener is left. Then it passes in the middle under the seat.

Large wooden bench with your own hands

If you need a large bench, and you do not plan to move it from place to place often, then this option is for you. This spacious bench is perfect for both indoor and outdoor use. It is made of thick timber, so it can easily support three or four adult riders.

It's not hard to build either. First you need to make these legs.

Then the legs are fastened with longitudinal bars (two at the top and one at the bottom), and a solid massive frame is obtained.

Using such a device, you can drill holes and hide the fasteners on the inner surfaces of the bench parts so that the self-tapping screws do not spoil the look of the product. But if you don’t have one, then you can still make such a shop by attaching the parts in the usual way.

It remains only to assemble the top and attach it to the frame.

Wooden bench without a single nail

And here is an example of a very beautiful and original bench, in which there is not a single nail or self-tapping screw.

It is made very simply, although it requires some special tools. First, all elements are cut.

And then, with the help of clamps and templates, the parts are glued in a checkerboard pattern.

You will need a lot of clamps, including several large ones, so this project is only suitable for those who have an impressive set of carpentry tools.

Benches and benches in the country and in the garden are primarily a place of rest. But just putting up a bench is not interesting. After all, you can create a beautiful corner. In order not just to relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. Moreover, the simplest designs are often played up, such that any person whose hands grow from their shoulders can make these benches with their own hands.

Photo of original benches (ideas for summer cottages and gardens)

Everyone knows what ordinary benches look like - they have seen it more than once. But the usual - the simplest - something does not want to. Especially if you have already begun the process of decorating the site or are just planning. Why not start from the bench? And there and other decorations will catch up. It's worth just getting started.

In the garden or near the house, I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.

What could be easier? Two wooden boxes in which flowers are planted and between them a pair of planed and polished boards. You can put this bench near the wall, and fill a couple on the wall long boards- there will be a back.

Not everyone likes wooden flower beds: wood requires care, and without it, it quickly loses its appearance. It is especially difficult to care for a tree that comes into contact with the soil. Instead of wooden boxes can be, for example, stone or concrete pedestals.

It is very easy to make such a bench in the country with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a board processed, or you can do it yourself. Instead of a board, there may be half a log - depending on the style in which the site is made out. Fastening the seat is easier with metal corner. It is attached to concrete with dowels, to wood - with self-tapping screws from below or through bolts.

If someone has large plants in durable flowerpots, you can implement the following idea. In this embodiment, the bench covers the plants. To avoid surprises, flowerpots must be very durable ....

There is a similar version of a bench made of boards and without plants: it may need to be placed on or in. The supports are made up of boards of the same size, and the seat is made of timber.

Bench made of boards - a non-standard option

And more variations on the same theme: hollow building blocks. Processed bars are inserted into the holes. This is the bench seat. Just round the edges of the beam, or it will be uncomfortable to sit.

For this garden bench, it is desirable to find large blocks with thick walls. If not, you need to securely fasten the blocks one to the other. The whole task is to fix the blocks first (for example, with studs), and then to them - the bars (with bolts or dowels).

Log benches

If your site is decorated in a rustic or ethno style, the standard approach will not work for you. It is best to use logs in this case - with or without bark - this is your choice.

Seat for a bench made of logs - sawn along the trunk of a large or medium diameter. The back is either a smaller diameter trunk, or just a cut closer to the edge. The legs can also be made from narrow pieces of logs (see the photo below).

Log bench - quick and easy

The legs and seats are interconnected with metal pins: a hole of a slightly smaller diameter is drilled under the pin in both parts. The pin is hammered into one of them, the second part is planted and also hammered, but they are not hitting the pin, but the wood. So that there are no traces, they lay a piece of an unnecessary board and knock on it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can chop off a little log, making a flat area of the same size on both connected parts. By increasing the area of support, increase the reliability of the seat fastening: after all, the log weighs a lot.

Bench option without back

Another interesting option in the style of "ethno" is presented in the photo above. It is implemented in stone, but you can also make this bench from a log. The seat is a very thick board, the legs are the bulk of the large diameter deck. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cutout with an ax, a grinder or a chainsaw), it's easy to do.

Often in the country you need a desktop. From a log you can make not only a bench, but also a table. A variant of such an ensemble is in the photo. Only the tabletop is made of boards, all other details are logs different diameters or half.

A greater degree of processing is inherent in the next bench in the same style. The back, legs, armrests are made of thick and not very thick branches, the seat is made of sanded and processed (peeled and sanded) unedged boards.

Another bench is almost also made. Only boards and branches are located in a different direction and a different view is obtained. A do-it-yourself bench of this type does not require much skill. In this case, the more careless the work is, the more decorative the result.

Wicker back - you will meet infrequently

Around the tree, you can make a platform for relaxation and a bench. The designs are simple, making the flooring is generally simple.

You can add a rest group and. And you can put it above the bench - this is the "progenitor" of the usual arch - one of the types of light gazebos. And so that relaxation is completely complete, you can do, or.

From metal and wood

Few people will put fully metal benches in their country house. They, of course, can be very beautiful, but in the summer they heat up to incredible temperatures, and it gets a little colder - you can’t sit on them, as they are too cold. Benches made of metal and wood are deprived of these shortcomings. The legs and supporting structure are made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting benches in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.

In a more advanced form - with armrests, backrest, soft cushions on the seat, this design may look like in the photo. The wide seat turns the bench into a sofa, and cushions add comfort - fabric-covered furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.

One important point: if you are making a seat or tabletop from several adjacent elements, they do not need to be joined back to back. There should be a gap of 3-4 mm between adjacent boards / bars. Wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is needed.

If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. The usual round or professional pipe is bent, leaving on the sides in the shape of the letter "P" with a wide back. The length of this back is the length of the bench. For the table, the dimensions are made a little larger: the legs and the back are longer.

Make two identical blanks on the table and bench. Next, cut the boards of the same length. For a seat about 40 cm, for a tabletop at least 55 cm. They are attached to the pipes with furniture bolts with a flat head. To prevent the caps from sticking out, a hole of a slightly larger diameter is drilled under them.

Board benches

The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you put soft pillows on them - and you can lie down.

Garden furniture in a modern style is easy to assemble: rectangles with partitions made of thinner boards, interconnected.

Even the usual design of a country bench can become exclusive if you approach it with imagination: wooden wheels are used instead of legs and armrests. It turned out to be a designer thing.

A bench made of boards with a back and wheels instead of sides - looks interesting

And the simplest possible one is a board with legs in the form of the letter “X”. Such shops were built centuries ago, you can see them today.

From the boards you can make a bench in a modern style: in the form of the letter "P". With this design, the main task is to ensure rigid fixation of the legs and the seat: the bursting forces are not compensated by anything. In this case, it is important to take a thick board or timber so that it does not sag. You can put the board "on edge": so the rigidity will be greater. To increase reliability, you can install corners from below.

The photo shows a 45° cut. Having a miter box or a circular saw makes it easy to achieve an accurate cut. By precisely docking the workpieces and fastening them, we get an angle of 90 °. If the seat does not bend, it will serve for a long time ...

An interesting and reliable version of the bench is shown in the photo below. Legs are assembled from boards different lengths: every second shorter by the width of the seat board. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.

original benches

Here, it seems, what else you can think of .. but it turns out, a lot. For example, attach the seat to a large stone.

Make a structure out of bamboo trunks.

Or stone.

Sitting in winter will be unpleasant, but beautiful ...

How to make a bench: photo reports

We will not make benches from stone - not everyone has the equipment, but from different pieces of wood - we can. Let's talk about the manufacture of simple, but unusual designs. So that a bench made with your own hands is a source of pride.

Bench without back

The design is simple, but it looks interesting due to the specific material. For the legs, a bar with rounded edges is used. If you have small logs, you can cut them on the sides. You get almost the same effect. Such material is not so rare, the legs are unusually assembled from it: the bars are laid one on top of the other flat. This adds zest and adds appeal.

This bench without a back has a length of about 120 cm, a width of about 45 cm, a height of 38 cm. You can round the edges of the beam with a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with it: it is already well processed and connects simply.

Depending on the found section of the beam, calculate the length that you need. Determine how many bars will have to be stacked one on top of the other to get the height you need. In this case, it took 5 bars per leg. Total 45 cm * 5 pcs - 2.25 m. It took 4.5 m of timber for two legs. A board 40 mm thick and 90 mm wide was used on the seat. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pcs = 6 m.

First, we cut and process the boards for the seat. Their edges must be rounded. If not grinder or a milling cutter, you will have to work with sandpaper, but you can find such a board or arrange at a sawmill to process it for you, and also polish it: there will be much less work. So, we cut the boards of the same length, grind and varnish (with or without tinting - your choice).

Fold the leg bars one near one, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.

You can take metal pins, or you can make dowels - carved from wood. Holes are drilled under them slightly smaller than the diameter, the depth of the hole is half the length of the pin. Then they are hammered into one part, a second part is pushed into the same hole from above. The connection is reliable, but to be sure, you can add glue, although then the design will turn out to be one-piece.

With a pin connection, the main task is to make holes strictly one above the other, so that the parts mounted on the pin give a smooth edge. We did part of the work - we drew lines where we will drill, now we need to measure the same distance from the edge. Let's create a template for this. We take a piece of plank with a width of about 1.5 cm. At this distance from the edge of the bars, we will drill holes. Having applied it exactly along the edge, we mark the intersections with the applied perpendicular lines.

We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. We also make holes on one bar from different sides in a checkerboard pattern. In a similar way - on the pins - the legs are connected to the seat: two pins for each bar.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. You can do it easier. Fold all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long hairpin, with washers placed under the cap and nut. To the legs of the seat strip assembled in this way, you can nail it on top or try to make a pin connection.

The bench is made by hand. Remaining finishing work

If you nailed the seat, take some wood putty of a suitable color, add some very fine sawdust and stir. Coat the joints with this composition. When dry, smooth with sandpaper. Sand all parts to a smooth finish and coat with lacquer or wood paints for outdoor use (better not covering, but which leave the grain of the wood visible).

How and with what you can paint wood read. It refers to lining, but painting techniques remain the same, and the compositions must be taken for outdoor use.

DIY bench from broken chairs

In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs with the help of bars of a suitable section.

For greater rigidity at the bottom, at a distance of about 20 cm from the floor, where the chairs used to also have jumpers, we make another frame with transverse rails. It can be used as a footrest or for storage of any things.

After grinding, we paint the resulting structure. This time the paint should be normal: different breeds wood can only be painted over with covering paints. Apply with a brush or spray bottle.

The point is small: cut the seat from thick plywood (8-10 mm thick) to size and cover it with foam rubber and fabric.

Pallet garden chair/bench

Everything is useful in the economy. Even from cargo pallets you can make garden furniture. Moreover, there is no need to disassemble them: we use one for the seat, we will make the back from the second. All you need is well-crafted planks for the armrests and bars for the legs.

In one of the pallets, we strengthen the attachment points by inserting pieces of bars. After inserting, we fasten it with self-tapping screws on one side and on the other.

From a beam with a cross section of at least 100 * 100 mm, we cut four identical segments 80 cm long. We fasten them in those places that have just been reinforced. We leave 20-25 cm on the legs. We fasten with four long self-tapping screws - 150 mm and not shorter.

It is important to maintain verticality and leave the same distance on the legs. Then the seat will stand straight. If there are errors in height, you can try to file, but then you will have to cut from above - so that the armrests are even. So try to screw it straight. Deviations from the vertical can be dealt with only by screwing the leg again.

We attach a second pallet to the rear racks, and on the sides - planks for the armrests.

It remains to cut a piece of furniture foam rubber and cover it with a cloth. You can make pillows for the back. If you are not going to process everything thoroughly, but to make a loft-style chair, go over with sandpaper or a grinder, treating all surfaces to smoothness. You can cover with paint, giving the wood a dark color.

Drawings of benches made of wood

Video lessons

A few videos on how to make benches with your own hands.