How to properly wash laminate floors so that there are no streaks and marks. How to make laminate shine: features of laminate, what is better to choose for washing at home What is the best way to wash laminate

Laminate flooring is the most common type of flooring in a residential area during renovations. It's really a good choice for several reasons at once.

A huge range of various colors and patterns allows it to easily fit into any interior.
It looks expensive and spectacular, although, in fact, laminate is a cheaper alternative to parquet flooring.
The material is pleasant when walking on it, while it is quite easy to maintain.
With careful care, such a floor can retain its “marketable” appearance for a long time and not lose its luster.

Our article from useful tips and the video will tell you how to wash the laminate without streaks at home. It will also help you choose the best care products for this beautiful and comfortable coating.

How to clean laminate

Although in our minds the thought has been put aside that the laminate is afraid of excessive moisture, at the moment, manufacturers offer to use this type of material even for flooring in the bathroom. At the same time, they guarantee the safety of the boards, the side parts of which undergo a special wax treatment. The composite components of the moisture-resistant coating themselves are based on a denser HDF-plate.

In order for an ordinary laminate to please the owners with an attractive appearance for a long time, it must be treated with care. It is important to avoid:

his scratching;
deformities and swelling;
loss of shine and the appearance of stains.

Advice: castle plots conventional slabs can be processed with a wax pencil independently when laying. This will not only protect the floor from swelling when water gets into the seams, but will also help hide minor scratches and chips on the surface of the boards, if they have already appeared.

It is important to be able to choose cleaning equipment that will be gentle on this coating at every stage.

To remove dust and debris, you need to use either a vacuum cleaner in which the nozzles have a soft pile, or non-rigid brushes and brooms.
For wet cleaning, you need to take a mop (necessarily with a good spin) and thoroughly rinse the floor with it.
Residual moisture is best removed using a flannel or microfiber cloth.

If you want to try a washing vacuum cleaner for cleaning, then it is acceptable to use models with low water consumption and additional function floor drying. The same applies to steam generators. You can use it, but it would be more correct to set the periodic supply of steam, and it is better to fold the washing napkin in half.

Carefully: the use of a steam cleaner is permissible on a laminate flooring if its seams are treated with special mastic or wax. Otherwise, steam easily penetrates between the plates, which leads to deformation of the surface.

Choosing a streak-free cleanser

Manufacturers household chemicals offer different variants detergents. You also need to choose a product for washing the laminate, which will not damage the coating. For him, they produce a special series for wood-based floors. They are usually united by a gel-like or liquid consistency and a neutral pH (pH). You can also use universal cleaning mixtures, the main thing is to make sure that the bottle with the product is marked that it is suitable for all types of surfaces.

Important: Laminate accumulates static electricity. Because of this, the dust seems to stick to the coating. The selected cleaning agent must necessarily contain a special component - antistatic. Pay attention to this, and then the floor of the house can be cleaned a little less often.

Often, the water itself that flows from the tap is alkaline in nature due to the impurities it contains. This is directly related to the appearance of light spots on the floor after cleaning. In order to eliminate this effect, water can be neutralized by adding vinegar (at a ratio of 1:40).

Do not use ordinary soapy water for cleaning, as it is essentially alkali. When interacting with the coating of the boards, the soap damages it, and white marks remain on the floor.

Can white be used?

Experts unanimously agree that the use of whiteness harms the laminate when washing. The upper protective layer of the plates is destroyed, and the previously shiny boards become dull.

In general, the use of aggressive chemicals is unacceptable. Cause irreparable damage can:

bleach;
ammonia;
acetone-containing mixtures;
abrasives (pastes, powders);
concentrated alkalis and acids.

Carefully: do not use abrasive detergents and sponges, which contain hard fibers, to wash the laminate.

Folk remedies for washing

There are quite a few folk secrets on how to keep your laminate floor looking good. Most often they are passed by hostesses to each other by word of mouth. Let's share basic homemade recipes.

It is advisable to use a chemical detergent no more than 1 time out of 4-5 cleanings. In other cases, it is better to use ordinary warm water (4 l) with the addition of vinegar (100 ml). Instead of vinegar, alcohol or lemon juice is sometimes taken.
Usage hot water(almost boiling water) for washing the floor will be an excellent deliverer from the appearance of stains. It's also the safest way to clean laminate flooring.
If any noticeable stains appear on the coating, an alcohol-based glass cleaner will help to effectively remove them.
careful and in an efficient way cleaning the laminate from dirt is adding several tablespoons of water to the water
A stationery eraser does a good job of removing dark marks left or heels. You can also use a solution of sodium bicarbonate (baking soda) for cleaning.

How to add shine to the coating

It is obvious that it is much easier to prevent scratching of a shiny laminated surface than to eliminate the problems associated with the appearance of microcracks later. Several rules must be followed.

Before washing the floor, be sure to remove small debris and dust from it.
You can sweep the laminate flooring using only soft brushes.
It is better not to walk on the floor in shoes and prevent sharp and heavy objects from falling on it.
When choosing a detergent, you need to pay attention to its composition. Do not use bleaches or mixtures containing aggressive chemical substances.

If micro-scratches have already appeared on the coating, special polishing compounds can come to the rescue. They are available in the form of sprays, so it is convenient to apply them pointwise to particularly damaged areas of the floor.

You can also prepare a special “cocktail” at home that will make your coating shine like new. Here is his recipe:

table vinegar - 2 cups;
warm clean water - 2 cups;
lemon juice - 1 tbsp. spoon;
dishwashing gel - 2 tbsp. spoons.

Such a composition will give shine and at the same time thoroughly clean the surface. Also, to polish the floor, you can wash it with plain water with the addition of a few drops of glycerin.

Advice: if you are in doubt about whether you can use a particular care product, then test it on small area surfaces in an inconspicuous place.

In general, laminate is a non-capricious material. AND how to clean laminate flooring, you now know. The choice of the optimal product for processing this type of flooring, in combination with the observance of simple rules for respecting the panels, will preserve the gloss and presentable appearance of the laminated surface for a long time.

No matter how ridiculous it may sound, it is extremely difficult to wash the laminate without streaks. Correctly carried out procedure guarantees you a brilliant coating and a well-groomed appearance, because the floor sets the tone for the entire room. However, the violation of technology leads to the formation of white spots, the laminate becomes dull, ugly. To avoid such a situation, it is important to follow practical advice regarding the choice of cleaning agent and wet cleaning in general.

Wet cleaning technology

Practically in all modern apartments and houses have laminate flooring. Especially actual problem wet cleaning becomes in those rooms that are walk-through.
Washing the coating without streaks is difficult for the reason that running water contains a lot of alkali in its composition, which, in combination with cleaning products, gives the very whitish tint.

To prevent light streaks, neutralize the water with table vinegar. Prepare the solution: pour in 550 ml. composition in 2.5 liters of running water, mix.
When the cleaning agent is ready, pay attention to the tool with which the cleaning will be carried out. You will need to purchase a special microfiber mop that has an adjustment lever for a more gentle cleaning. Important! Do not use old T-shirts and other fleecy rags as a tool. This is especially true for colored products, they make the surface dull. The advice applies not only to cleaning laminate, but also linoleum and parquet.
After all the preparations, rinse the soft nozzle of the mop with water, wring it out, lower it into the solution, wait 3 minutes. After the expiration date, remove excess water, proceed to wash the coating. Follow the procedure with open windows so that puddles and wet spots do not form on the floor.
Your movements with the mop should resemble a snake. You can also move from one wall to another, but then the mop should run parallel to the laid laminate panels. Do not close windows after cleaning is complete.
In cases where large puddles have formed on the coating, they must be removed before the moment when the floor begins to dry. Wipe the laminate with a lint-free cloth, if possible, go over the surface with a practically dry mop. Such a move must be made to prevent the appearance of streaks and swelling of the panels.

Important!
Do not use rags or sponges with hard elements (embroidery, buttons, seams, etc.) to clean the laminate flooring, as they leave unsightly streaks. In addition, when treating the floor with a coarse brush, you run the risk of leaving microcracks on the laminate, which will “spread” under the influence of water.

The main feature of the coating care is that it is necessary to use only special products marked “for laminate”.

Important!
When laying laminate flooring, consult with a specialist what cleaning agents are allowed to wash the coating. Many preparations are inherently extremely aggressive, they can lead to deformation and swelling of the panels.

Mellured Bio. The tool perfectly copes with pollution of any kind, suitable for cleaning laminated flooring after repair. A special composition smoothes the scales and forms a kind of film that repels moisture.
"Mister proper". A budget option that has been approved by Russian housewives. In addition to cleaning the coating from dirt and dust, the product has a pleasant smell, which gives the room freshness.
Emsal Laminat. The composition developed for the laminated coating belongs to the luxury-class preparations. It is suitable for expensive parquet and tiles, because it does not leave streaks at all. The main advantage is cost-effectiveness, one bottle is enough for 3-4 months of regular use.

Achieve well-groomed appearance coating and extend its life will help practical advice.

Do not use detergents with abrasive particles to clean the coating, so as not to disturb the structure of the panels.
In no case do wet cleaning with the use of chlorine-containing preparations and ammonia, since these components destroy the protective (lacquer) layer.
Before you start washing the coating, make sure that there are no small stones, grains of sand and crumbs. To do this, it is recommended to sweep the floor.
Give preference only to “laminate” products, refuse to buy formulations for tiles or linoleum.
It is important to understand that high heat treatment detrimental effect on the condition of the coating. For these reasons, do not use steam cleaners, under the influence of temperature, moisture clots will penetrate into the gaps between the panels, which will inevitably lead to swelling.
Avoid using detergents that contain alkali and acid. The advice is extremely relevant if your laminate has a glossy surface.
To finish the laminate flooring after washing, purchase a microfiber cloth. It will prevent the formation of divorces.
Before preparing a solution from the selected detergent and water, read the instructions. Do not exceed the amount indicated by the manufacturer, otherwise you will not be able to avoid white marks.
The recommended frequency of wet cleaning of the room varies between 2-4 times a week, it all depends on the patency of the room.
If you do not have the opportunity to purchase products for laminate, buy liquid soap for children or dissolve a third of the household bar in the basin.
Do not forget to add table vinegar to the water you plan to wash the floors with. If desired, it can be replaced with medical alcohol, vodka, citric acid, cutting it in half.

How to clean laminate after repair

It is not uncommon for the surface of the laminate to get dirty after the repair. To avoid this situation, follow the instructions.

Remove large pieces of debris, sweep the coating with a broom, collecting dust and dirt.
If there are traces of mounting foam or paint on the laminated flooring, remove them with cleaners containing ethyl alcohol or acetone.
To get rid of adhering building materials, pour a small amount of the composition on the stain, wait about two minutes, remove the residue with a soft microfiber cloth.
If gaps or scratches form on the laminate after cleaning, mask them with a wax pencil and rub well.
Finish by mopping the floors by moving the mop from one end of the wall to the other. If necessary, wet clean 2-3 times using professional cleaners.

With the advent of laminate flooring, popular manufacturing companies began to produce a series of products specifically for this kind of flooring. In addition to excellent cleaning properties, the preparations serve to protect the surface and give shine, due to which the laminate does not fade or change color. Perform wet cleaning according to the instructions, follow the recommendations.

Video: how to wash a laminate without streaks in minutes

Laminate - finishing material wood-based, so it is sensitive to moisture and requires careful care. In order for the laminate floors in the rooms to shine, you should know how to properly clean the coating after repair, remove stains from household dirt, how to properly wash the laminate floor and care for its surface.

Not proper care leads to the fact that flooring loses its attractive appearance, becomes dull, with spots remaining due to improper removal of contaminants. Laminate panels may swell due to moisture during cleaning.

What Not to Do

1. Aggressive chemicals damage the surface of the laminate, leave stains on it. Before removing dirt with a strong cleaner, check in an inconspicuous place to see if it will damage the color and structure of the laminated surface. Contraindicated substances include:

ammonia (and all products based on it), corroding the laminated layer;
acids;
alkalis;
chlorine-containing products.

2. Abrasive cleaning agents mechanically damage the protective layer of the laminate, cleaning powders and gels with abrasive additives should be discarded. Before washing the floor, remove abrasive dirt (sand, small stones) with a brush or vacuum cleaner.

3. Means for polishing parquet and other coatings (mastics, silicone) are not suitable for laminate, they spoil the structure of the decorative and protective layer.

4. Water and water vapor have a detrimental effect on the flooring material, penetrating into the joints between the panels, so the use of washing vacuum cleaners and steam cleaners is strictly regulated.

5. Move furniture over laminate flooring very carefully, it is advisable to place felt or felt, cardboard under the legs, use special stickers with a protective layer.

Cleaning laminate flooring after renovations

At the time of repair, it is recommended to cover the floors with cardboard or thick plastic wrap. But even in this case, it is impossible to completely protect the floor covering from contamination with cement, construction dust, glue, paint and other materials for construction and finishing works.

Laminate cleaning after repair is carried out in stages, trying not to damage the flooring:

manually remove large debris in bags, carry away the remains of building material;
gently sweep away most of the dust from the surface;
with help construction vacuum cleaner or a powerful household unit, they remove construction dust, trying to carefully treat the gaps between the laminated planks with a narrow nozzle with an oblique cut, the gaps between the laminated planks (the household vacuum cleaner must be equipped with a paper or plastic dust collector, since fine dust will again enter the air through the fabric bag);
remove stains from construction compounds;
do wet cleaning, often changing the water to avoid abrasive damage to the surface and whitish stains.

Consider how to wash the laminate after repair, in particular, how to wash the mounting foam. To remove pollution, it is recommended to arm yourself with special equipment - they are sold in hardware stores.

Carefully read the label - it should indicate that the product is suitable for cleaning laminate. It should not contain ammonia or chlorine, concentrated acids or alkali. Cleaning agents based on ethyl alcohol, acetone are allowed.

To wash the primer, use water - wipe the soiled areas with a damp soft cloth, trying to ensure that there is no excess moisture that can seep between the planks. If the stain is old, soak it with a fresh primer or put a damp cloth on top for a few minutes.

By the same principle, wallpaper paste is removed, water-based paint, whitewash.

Tile adhesive from the laminate, like cement, is removed by gently soaking the contamination with a damp cloth. It is important not to damage the floor surface with abrasive particles of the material.

Deciding how to wipe the mounting foam or oil paint, preference should be given to special equipment. If specialized chemistry is not at hand, acetone is used, but the agent is applied for no more than a minute and the treated area should be immediately wiped with a damp cloth, removing traces of the chemical.

During repair work scotch tape is often used and sticky marks may remain on the floor. They can also be removed with acetone.

If superglue left stains on the laminate, try treating them with acetone or ethyl alcohol. If it does not help, you will have to purchase a specialized solvent.

After removing the stains, it is necessary to wash the laminate from building dust, using the usual care products for this type of coating.

Accidental minor damage to the laminate floor after repair is corrected with a special wax pencil, matched to the tone.

Washing vacuum cleaners and steam cleaners

Consider whether it is possible to use a comfortable modern technology– steam cleaners and washing vacuum cleaners.

The washing vacuum cleaner sprays water with detergent on the surface, after which it sucks it back along with the dirt. In the process of cleaning with the unit, moisture remains on the floor covering for some time and has a chance to penetrate between the joints of the planks, which will lead to swelling of the flooring.

For this reason, it is not recommended to clean the laminate with a washing vacuum cleaner, especially when it comes to material up to 6 mm thick. But it is allowed to wash the laminate with the help of the latest generation units, with an economical consumption of washing liquid.

In this case, a relatively small amount of moisture will enter the floor surface, and a special nozzle will wipe it almost dry. Such washing vacuum cleaners are characterized by increased suction power.

Cleaning with a steam cleaner is not recommended for the same reason - hot steam penetrates into the joints, which leads to swelling and swelling of the coating. The steam cleaner can be used to clean laminate flooring if the flooring is installed using an adhesive.

At the same time, the napkin for the unit is folded in half and steam is supplied not constantly, but intermittently. This will get rid of dirt without damaging the laminate.

Removing household stains

To make the floor look neat, it should be timely cleaned of household stains. An alcohol-based glass cleaner will help clear most dirt.

Consider how to clean stains of various origins:

Ink. Use a damp cloth with detergent. If that doesn't work, get some ink stain remover.
Marker traces. White spirit applied to a soft cloth will help wipe off the marker.
Blood. Traces of blood are removed with a damp cloth, you can additionally use a spray for washing glasses.
Red wine. If you have spilled wine or other alcoholic beverage that can stain the surface, denatured alcohol will help clean the laminate.
Wax. To clean the floor covering from wax or paraffin, a hot iron will help and paper napkins or towels. With a heated iron, the stains are ironed through several layers of napkins, changing them as they get dirty.
Zelenka. To remove the brilliant green, lightly moisten the stain and rub it with an eraser. You can also try to wipe off the brilliant green with an alcohol-containing agent.
Shoe stripes. To remove black stripes from the soles, a regular eraser or an aqueous solution of baking soda will allow.
Super glue. If a drop of instant adhesive falls on the floor, do not try to peel it off - damage the outer layer of the coating. Try to dissolve the glue with white spirit or acetone, but it is better to use a special solvent.

How to clean a floor to a shine

A mop with a sponge, soft, easy-to-wring rags for washing the floor will help to wash the laminate with high quality. The water should be warm, with the addition of a special product for laminate flooring.

To wash the floor covering to a shine, without streaks, proceed as follows: for the first time they wash the surface with water with a special agent, for the second - with clean water, rinsing often and squeezing the sponge or rag well. Make sure that moisture does not accumulate or remain on the floor.

To ensure that a clean floor retains its luster, do not walk barefoot on it - otherwise marks will remain on the surface. Use indoor shoes with soft soles.

Many housewives are interested in the question of how to wash the laminate so as not to spoil it and achieve perfect cleanliness of the floor. This flooring is one of the most popular - it looks beautiful, makes the floor even, has an affordable price. It is recommended to choose detergents for laminate flooring depending on its type - it is matte or glossy, how moisture resistant it is according to typical classifications, and also taking into account the nature and degree of pollution.

Laminate is a multi-layer material made on a special machine, consisting of wood boards and paper impregnated with acrylic and melamine resins. One of the most practical types of this coating is class 33 and 34, they can be used in areas such as the kitchen and hall. The main difference of any laminate is that it is based on a canvas made of wood fibers (for example, wenge), which does not tolerate excess water, so the laminate is not placed in the bathroom and special care is needed for it.

Rice. 1 - Laminate board layers

Do not wash the coating with a too wet cloth - it is better to wring it out well. Otherwise, water that gets into the gaps between the lamellas, chamfers, seams or along the baseboard will destroy the material. Remember that before you start wet cleaning, be sure to sweep the floor, otherwise sand and rough fine dust will scratch the laminate and increase the effect of static electricity.

How to extend the life of the laminate: general rules of care

The floor must be looked after delicately - a special cleaning technique implies the following recommendations:

To prevent furniture from scratching the floor when moving, stick pieces of felt on its legs.
Put floor mats in places where the floor is used.
Do not drop heavy objects on the laminate floor (for example, concrete products), avoid getting dirt and sand on the floor.

Rice. 2 - How to care for laminate flooring

So that the floor does not swell, spilled water should be immediately cleaned with napkins. Swollen boards are not subject to restoration. If there are flowerpots on the floor, place them in water-repellent trays - in the process of mopping, do not forget to clean the space under them. sunlight may discolour the coating - keep this in mind when choosing the color of the laminate in areas of the apartment that are not protected from daylight. These effective methods will allow you to keep the coverage in at its best for a long time.

How to clean laminate

To keep the house free of dust, you should regularly carry out wet cleaning by hand. If you do not clean the floor systematically, spots appear on the coating, the gloss is lost. But improper care can also lead to unpleasant consequences - damage the protective layer, exfoliate and spoil the coating, deprive it of sealing.

The complexity of caring for a laminate in an apartment is that often housewives use ordinary tap water to wash it, which contains a lot of soluble salts. To avoid streaks on the floor after washing, it is recommended to add a little vinegar to the water. Try to take care of the coating carefully, clean it immediately as it gets dirty. Stubborn stains at home are more difficult to wash out - you need to constantly monitor the cleanliness of the floor.

Rice. 3 - Wash the laminate with a solution of vinegar

What is the best way to clean laminate

There are special antibacterial and antistatic agents. They allow you to avoid the appearance of streaks and quickly wash off dirt. Usually these are washing gels with a neutral pH level.

How not to wash laminate flooring

Every housewife has her own secrets to improve the condition of the floor. But one of the main rules - to make the floor look like new, do not use the following household chemicals when washing:

chlorinated powders, bleach, bleach and other chlorine-based products;
alkali-based soap;
acids, bleaches, "Whiteness" (pictured);
hard brushes.

All of these products damage the protective coating, leave marks, make it slippery, give the floorboards a creak.

So that the shiny floor is always clean, does not slip and does not creak, it needs proper care. Brief cleaning instructions:

Rice. 4 - Washing the floor from a laminated board

Sweep the floor cleanly with a soft brush or vacuum.
Dilute detergent- antistatic agent according to the manufacturer's recommendations.
Moisten the nozzle of the mop, squeeze well, wipe the floor.

To avoid streaks, treat the floor again, but with a clean, damp cloth. Make sure you don't miss any section. After washing off the residue, polish the laminate with a soft cloth.

What is the difference between caring for white and dark laminate

Cleaning of coatings of different shades practically does not differ. The only caveat is that stains are more noticeable on a dark laminate, which means that you will have to rinse off the water and wipe it more diligently. Black laminate is the most whimsical to care for.

The easiest way to care for a laminate floor is to wash it with a cloth dampened with warm water. It is very important that the rag is not too wet, since a large amount of water, penetrating inside the floor structure, negatively affects the “locks” at the joints of the panels and the quality of the laminate itself, which begins to swell and warp from moisture. If, nevertheless, water in a large volume has fallen on the laminate, then in order to maintain the integrity of the floor, you must immediately remove it from the surface with a wrung out rag. If gaps appear between the plates, you can use a special sealant to seal and grout them.

Basic cleaning

Wipe the matte laminate with a napkin - carry out this procedure daily. If animals live in the house, wet cleaning should be carried out every 1-2 days. Laminate flooring should be swept every day to keep it free of dust.

Rice. 5 - Sweep the floor from the laminate

Hot water

This is the main component of wet cleaning, but remember that it must be diluted with cold. Like parquet board, boiling water is contraindicated for laminate. Wash your laminate flooring twice a week with clean water and with a cleaning agent twice a month. After washing, be sure to wipe the floor with a dry cloth to get rid of streaks and prevent swelling of the material. It is undesirable to apply mastic.

Vinegar

It is used to make the floor shine. Vinegar also helps prevent streaks and whitish marks. Dilute 100 ml of the product in 2 liters of water and wash the floor with this solution.

Gentle soap

Suitable bar baby, "Vanish", "Fairy" or liquid with a natural composition. Do not use laundry or highly alkaline soaps. Dissolve 1 g of product in 1 liter of water, wash the floor, remove the remaining foam with a damp clean cloth, then wipe the laminate with a dry cloth.

Removal of complex contaminants

To deal with serious stains, use professional stain removers. In their absence, universal concentrated gels are suitable - they are able to quickly wipe off traces of juice, chocolate, and fat. For a final cleaning of the surface, you can use a floor shampoo.

Polishing laminate flooring

Rice. 6 - Rub the laminate floor

How to make the floor shine? Use vinegar. Dissolve 60 ml in a liter of water, spray on the floor with a spray bottle and wipe. Or mix 80 ml of vinegar with 3 drops of dishwashing liquid, 4 liters of water and wash the laminate in the usual way.

"Home" equipment for washing laminate

To ensure that the coating always looks perfect, for cleaning you will need special tool and detergents. A standard housewife kit includes a vacuum cleaner with a soft nozzle, a washing vacuum cleaner, a short-haired broom, a mop with a microfiber cloth, a bucket and a dry cloth.

Stain removers

Special gels and liquids for washing the floor will come in handy. Often they come with wax, but they can do without it. These products remove stains, stains, dirt, smell great and refresh sparkling floors. Also, to eliminate stains, you can use "Domestos". Before use, test its effect on an inconspicuous area of the floor.

Mop and cloth for laminate floors

What is the best tool to use to clean laminate flooring yourself? Ideally - a mop with nozzles. You can use a rope or sponge nozzle, microfiber, an old towel, cotton - the main thing is that the nozzle is soft. Once you've wiped down the laminate with a damp cloth, remove any remaining water with a dry flannel, microfiber or nylon. Do not forget that this coating is best washed with warm water. Hard and melamine sponges are not suitable for rubbing and polishing. Why not use polish? Because the floor covered with laminate requires careful maintenance, and polish can damage it.

Rice. 7 - Mop for laminate

Washing vacuum cleaner and steam cleaner

These steam household products will also do an excellent job of cleaning - both laminate and parquet. A mechanized sink is only suitable for laminate grades 32-34 with wax impregnation. The most “correct” washing vacuum cleaner is equipped with an adapter: choose such models. Vacuuming should be done carefully - complete with a washing vacuum cleaner should be a nozzle that removes moisture from the floor. She can clean the laminate after the initial wash. After use, it is advisable to wash the embossed nozzles with your own hands, and not in a typewriter.

A steam generator or steam vacuum cleaner perfectly removes dust from the floor, disinfects the surface, and destroys fungi. Steam eliminates the need for chemicals, in the course of its influence divorces are not formed. Using a steam generator to clean the surface is not suitable for a laminate with a lock joint - deformation of the lamellas is possible, which cannot be restored.

How to wash different types of stains?

Sweep away dirt with a soft brush before removing any repairs or dirt. Apply the cleaner to the stain, let it sit for a few minutes, wipe first with a dry and then with a damp cloth. Fill scratches and deep chips with repair sealant, glycerin or wax pencil. Unfortunately, if acid gets on the coating, it remains only to replace the damaged tile; neither folk nor special methods will help to clean it.

Cleaning from mounting foam or resin

Rice. 8 - Stain from polyurethane foam

When repairing, traces of the used products, soil can get on the glossy floor. From the remnants of mounting foam and pine resin, a remedy called "Dimexide" will help. This solution has a strong odor, so use it in a ventilated area. Moisten a cotton swab in Dimexide, put it on the contaminated area and after 15 minutes wipe off the remaining plaque with warm water. Avoid hard rubbing.

Dry wallpaper paste cleaning

Try to gently scrape off the dirty marks. If glue or whitewash does not lend itself mechanical cleaning, dissolve their traces with nail polish remover or ammonia. Immediately after treatment, rinse the flooring with clean water, without leaving it for a long time, otherwise damage cannot be avoided.

Primer removal

Try to fix construction stains as soon as such defects appear. You can wash the primer with warm water with a little vinegar. It will also be needed to give shine, and so that the shoes do not stick to the coating when walking on the floor.

Putty removal

Moisten the stain disinfectant for cleaning windows, rinse with a soft cloth. Or use a super-steamer that adds shine. Scrub the stain with it, then walk with a cloth with soapy foam and clean water, remove the residue. If you plant a new putty stain on the laminate, remove it immediately, without waiting for it to dry.

Rice. 9 - Putty for walls

Laminate paint removal

It is convenient to remove its traces, as well as stains from wallpaper glue, with acetone, methyl alcohol or special stain removers with deep penetration. When working with methanol when smearing the coating, be careful - it's poison.

Cleaning from glue "liquid nails"

It is more convenient to remove traces of silicone or "Moment" with acetone, solvent or high concentration ethyl alcohol (or vodka). In the same way, “liquid nails” are also removed. Soak a cotton pad in liquid, treat the stain, wipe with clean water. For protection and renewal, wax your floor.

Cleaning a laminate from a marker or green paint

Immediately clean the traces of the felt-tip pen with acetone or nail polish remover. If brilliant green or iodine is spilled, blot them, wipe them with alcohol or strong alcohol, gasoline, kerosene, glass cleaner. Remove stain residue with soap and water.

Removing adhesive tape from laminate flooring

Remains greasy spots Wipe off adhesive tape with glass cleaner. Spray the liquid, let it work for 2-3 minutes and wash off with clean water and soap.

Urine

Rice. 10 - Urine stain on the floor

Traces of dog or cat activity are washed off with soapy foam. If dog urine smells, spray dilute acetic acid or glass cleaner. Rinse the cloth in water and wipe the floor.

cement dust

Moisten the traces left after laying the cement with window cleaner or a steam generator, then clean with a soft cloth. Repeat the method if necessary.

Oil

Before removal, traces of fat must be frozen. To do this, put ice from the freezer on the laminate floor in the kitchen. Scrape off the leftovers butter with a plastic knife, wipe the floor with soapy water and clean water with a potassium permanganate crystal so that small litter is less sticky on it. Footprints sunflower oil you do not need to freeze - remove them in the specified way immediately.

footprints

Scrub shoe stains with an eraser. If there are marks from bare feet on the floor, wipe them off with a rubber band or a solution of baking soda or soda ash.

Wax

Carefully clean off traces of chalk, paraffin, wax crayons, drops from a candle with a wooden scraper. Degrease the surface with soap, then wipe with a damp cloth.

Video

There are several options for cleaning laminate flooring. The most popular is pure water. Wash the non-moisture resistant floor with a cleaning agent once every 2 weeks. It is forbidden to use abrasives, boiling water and poorly wrung out rags. If a stain appears, remove it immediately.

Finished the renovation in the apartment and put the laminate? Fabulous! The room was simply transformed - the new coating completely changed the interior. But the question involuntarily arises, how long will the floor remain as beautiful? It depends on you. The coating must be properly looked after, and most importantly, avoid scratches and disgusting streaks. Now we’ll talk about how best to wash the laminate so that there are no streaks.

What is good about laminate?

Caring for laminate flooring is easy. Some types of this material do not even need to be washed - moreover, wet cleaning is contraindicated for thin cheap laminate, intended only for residential premises. But in the vast majority of apartment owners choose class coverage:

Important! These types are intended for residential and public buildings, respectively - they are more resistant to moisture and abrasion than those in which the marking begins with the number 2. So - just pick up the best remedy to clean laminate flooring and regularly wet mop to keep the floor squeaky clean.

Compared to other types of flooring, laminate flooring:

practical;
convenient;
has excellent heat-shielding properties;
May be different color and with a different pattern;
easy care.

Important! The panels can be laid even without an assistant, the floor does not need to be rubbed. In some cases, if necessary, you can rearrange the fragments.

This coating is used in the “warm floor” system, so that you can walk around the apartment barefoot at any time of the year. Manufacturers take into account the tastes and financial capabilities of a wide variety of people, so in the store you can find material of any color and with almost any pattern. In a word, there is no price for this coverage.

Important! Laminate has one drawback. With wet cleaning, stains often remain on this material, which are not so easy to get rid of. But smudges may not be - it all depends on the skill of the hostess and the availability necessary materials and tools.

What should be given up?

Divorces on the laminate after washing appear if you choose the wrong mop or detergent. So it is better to immediately abandon some pastes and powders, as well as very popular cleaning items.

Let's start with items. You definitely won't need:

hard brush;
metal washcloth.

When sorting through the cabinet with detergents, set aside:

soap;
caustic acids;
bleach;
alkalis;
abrasive pastes;
means for washing sanitary ware.

Important! The fact is that the laminate is a multi-layer coating. In fact, it is not the entire panel that will have to be processed, but only its upper layer, made of acrylic resin. The protective film, of course, is reliable, but it is not friendly with caustic acids and alkalis - they simply dissolve it. The basis of ordinary household bleach is chlorine, which is also harmful to acrylic resin. Abrasive paste, like a hard brush, leaves scratches. And plumbing products very often include either such a paste or acid.

How to wash the laminate so that there are no streaks at home?

It is always better to use proprietary products designed for a particular material. You can find shampoos and gels for laminate flooring in any hypermarket or hardware store, since this type of coating is now extremely popular, so care products for it are in great demand.

The best laminate cleaner is one that won't damage it. Pay attention to labels. There should be a label “for laminate”. Be sure to read the instructions, which clearly indicate how much shampoo or gel to add to a particular volume of water. In this case, the main thing is not to overdo it. If you constantly care for the floor, a small concentration will not cause any harm to the coating. But if you poured too much shampoo, there will be stains that you so want to avoid.

The most popular means for such coatings:

Mister Muscle.
Mister proper.
Buggy."
Glorix.
Tyron.
Emsal.
Pledge.

All these substances wash the laminate perfectly, they have only one drawback - the price will not please every hostess. If desired, you can choose a cheaper option. You will be rescued:

baby shampoo;
dishwashing liquid;
food vinegar;
ethanol;
lemon juice.

Option 1

The solution is easy to make. In 1 liter of water, add about 1-3 teaspoons of the product. The amount depends on the concentration. This recipe will significantly save on detergents.

Option 2

In 1 liter of water, add 2-3 tbsp. l vinegar, alcohol (ethyl) or lemon juice. All three substances perfectly cope with dried dirt, and the chance of getting a floor in divorce after cleaning is almost zero.

Important! With constant care, detergent is not needed at all. The floor can simply be wiped with a soft cloth dampened with clean water.

Tools

You won't need any fancy tools. Your motto is gentleness in everything. Accordingly, you need:

soft broom;
mop with a sponge;
vacuum cleaner with soft nozzle;
soft rags.

If spots appear

Clean water with a soft cloth is a bad helper if there are stains on the floor that do not immediately wash off. They need to be dealt with before you start washing the laminate. Most often, traces remain on the floor:

from soles;
from fruit juice;
from fat;
from wine;
from felt-tip pens and paints;
from blood.

You can deal with all this disgrace with the help of ordinary home remedies that you will probably find in your kitchen closet or first aid kit:

Why is soap needed?

Although it is not recommended to use soap when cleaning laminate flooring, there is one case you may still need it - if you need to remove grease from the floor. Lather a cloth, wipe the stained area, and the stain will disappear as if it never happened.

Important! In some cases, acetone will be needed if, for example, you have dropped nail polish on the floor. Stains of wax or paraffin are best removed with a wooden or plastic scraper (a baby scoop will do).

Glass products

Blood or sauce stains will instantly disappear if you wipe the stained area with window cleaner:

Spray on a little.
Spread it evenly over the surface with a soft cloth.
Wash the cloth and wring it out well.
Wipe the contaminated area.
Wipe the laminate with a dry cloth.

Universal stain removers

You can also use factory stain removers. Suitable for your coverage:

laminated clear;
Loba;
Quick step.

They are able to remove almost everything - fat, chocolate, juice, wine, shoe polish.

We remove scratches

Sometimes housewives are baffled by the question, what to do with small scratches. It seems to be too early to turn the laminate, but they look ugly. To remove them, it is best to use repair paste.

If it is not at hand, you need:

plasticine;
felt-tip pen;
wax crayon or pencil.

Scratches are simply rubbed with these materials.

Important! Plasticine and felt-tip pen must exactly match the color of the material.

About cleaning technology

It would seem - well, what kind of technology is there? It is important that the water is clean and the rags are soft. However, everything is not so simple. Having wondered how to wash the laminate without streaks at home, try to follow a certain order, and then everything will work out:

Sweep the floor, removing large debris - this should be done in any case, regardless of whether you will mop or use a vacuum cleaner.
Remove spots.
Prepare the water by adding a little 9% vinegar (a glass per liter of water) - this will neutralize the alkalis that are always in tap water. By neutralizing these impurities, it will be easier for you to wash the laminate so that there are no streaks. You can also use a branded detergent, which also neutralizes alkalis.
Wet the sponge on the mop or rag.
Press well.
Dip the nozzle or cloth into the vinegar water.
Wait 3 minutes.
Wring out the water so that the sponge or cloth is damp, not wet.
Open a window or at least a window.
Mentally divide the room into sections.
Wash the laminate in one area - it is best to move the mop with a "snake".
If puddles appear, remove them immediately.
Wash all the other fragments in turn.
Wipe the floor with a dry cloth.

Important! The rag must be lint-free! Do not use old shirts and T-shirts to wash floors, even if they are very soft. A microfiber cloth is ideal.

Dust on the laminate - what to do?

If there are no stains, but dust is very clearly visible, there is no need to wash the floor, especially since wet cleaning is not always useful for this coating. In this case, the easiest way is to take a regular vacuum cleaner with a soft nozzle and thoroughly clean the entire room.

Can a washing vacuum cleaner be used?

A washing vacuum cleaner is a handy thing. If it is, the hostess will inevitably be tempted to use it everywhere and always. Especially if the room is large and you don’t want to mess around with a mop.

You can use a vacuum cleaner, but not always:

Mechanical washing will not damage only high-quality laminate, marked 32, 33 or 34, and even then, not everyone. It is necessary that there be wax impregnation, otherwise the remaining layers will swell and the floor will have to be changed.
A vacuum cleaner is also not suitable for everyone. You want a machine that does not spray much water and is able to collect it immediately (that is, equipped with a special nozzle for quickly eliminating puddles). It must be a vacuum cleaner with a power of at least 300 W, preferably with a water regulator and a parquet adapter.

Important! "Thomas" or "Bissell" will do, but there are other models.

steam generator

Another modern unit that allows you to wash the laminate without streaks is a steam generator. It not only removes dirt, but also disinfects the floor, which is especially important when there are small children in the house. Another plus of such a device is that detergents are not needed, as well as household chemicals.

But the steam generator cannot be used frequently, from exposure high temperatures coating wears out faster.

Important! Having decided to try cleaning with a steam generator, keep in mind that it is not suitable for locking joints, the panels will be deformed.

Cleaning after renovation

After repair, quite a lot of dust and debris remains on the floor, even if you covered the laminate when you painted windows or glued wallpaper. Spots of paint, pieces of adhesive tape, an accidentally dropped paper clip or carnation - this is not a complete list of troubles that an owner who has just finished putting his apartment in order may face.

Therefore, post-repair cleaning is a responsible matter. In this case, it is better to wash the laminate so that there are no streaks, in this order:

Collect all rubbish - large and small.
Put it in bags and remove it from the apartment.
Sweep the floor with a soft broom.
Remove extra traces - polyurethane foam it cleans up perfectly with alcohol or acetone, like paint. If it becomes necessary to use a solvent, test it somewhere in an inconspicuous place.
Remove sticky Construction Materials- you don’t need to scrape anything, pour detergent on the stain, wait two or three minutes, remove what is left with a soft cloth.
Paint over scratches with repair paste.
Wash the floor in the same way as during normal wet cleaning - without unnecessary puddles.
If necessary, repeat the procedure.

To make the floor last longer

What determines the service life of a laminated coating? Of course, from the class of the laminate itself, but in many respects from careful care. As for the class, in the same apartment there can be different coatings- for example, in the living room or bedroom, you can lay material from class 21 to 23, but in the hallway or kitchen, a more wear-resistant laminate is preferable, which has the first number on the label - 3. The coating should also be strong in the walk-through room. Low-grade laminate is no longer produced, but it is still available in warehouses and stores, and it is quite cheap.

Regardless of what numbers are indicated on the label, you must comply simple rules to prolong the life of your coating:

Do not walk on such a floor in sharp heels.
Attach special felt pads to the legs of the furniture.
In areas that are subjected to maximum mechanical stress, lay mats - at front door, near the bed or sofa, in the nursery.

Now you have figured out all the nuances of how and how it is better to wash the laminate so that there are no streaks with any degree of contamination of the coating. We hope all these useful advice you took note of it, and now cleaning will not be a hassle for you, and a brand new laminate floor will look just as attractive after 5 years.