Interesting homemade products for summer cottages and gardens with their own hands. Do-it-yourself homemade products for the garden and vegetable garden (39 photos). Pond from an old bath. Pallet bench. Rake hanger. DIY flower pots from shoes Homemade for home and garden

All gardeners want their summer cottage not only to please with a harvest, but also to be attractive. No need to buy expensive decorative elements- good country homemade products can be made with your own hands from improvised materials, which for the most part we throw in the trash.

Useful crafts for the garden

As a rule, garden, suburban areas do not differ in large areas, and one can only dream of amenities in the form of a shower. Making a garden shower with your own hands is not difficult at all:

It is important to choose the right place to place the shower. It is better if it is an elevated place, then it is more convenient to equip the drain. Do not place the shower far from home so that you do not feel uncomfortable on a cool evening. Choose a site that is not covered by branches of shrubs and trees - the water will not heat up through them, and a lot of insects will fly in.

The simplest type of shower is in the form of a rack mounted on a wall or vertical panel. All you have to do is supply water and drain wastewater.

Among the others useful homemade for the suburban area:

A gazebo where you can have a good time on a summer evening.
Recreation area with barbecue.
Playground for kids: swing, horizontal bar, sandbox, small table with a bench.

Original flower beds

Flowers in the backyard - required element, with them the cottage looks attractive. An original flower garden can be made from various items - at least from an old wheelbarrow. Find a place for it in the landscape, fill it with soil and plant annuals. Lush multi-colored hats will attract attention with bright colors and fragrance.

You can turn an old bicycle into a flower stand. Place small planters on it with ornamental plants and flowers. It is better if they are different: low and medium in height, hanging, different colors and forms.

On a fence or railing outdoor terrace, verandas can accommodate unusual flower pots, the role of which will play a great role ... old teapots, bowls and pots. And the remaining single tea cups from the service can be hung obliquely against the wall: let the effect be created as if the flowers “poured out” of them.

In the garden, an old bath, shabby wooden chair, a watering can can become the basis for a flower garden, even old shoes can become the basis for a planter. Such unusual application old things will delight neighbors and your guests.

The original flower garden can be made from old car tires:

Paint the tire bright color and hang on a chain to a strong bough on a tree. Insert a planter with a flower inside the tire. Hanging flowering plants will look more effective.

Place the cover on the stand. Gently wrap it with thick jute twine so that each row fits snugly against the previous one. Fill the container with soil and plant flowers.

Original furniture for a summer residence can be made from wooden pallets. Sofas and benches, complemented by soft pillows, will make your stay comfortable.

On a Saturday evening, when you sit down to take a break from gardening, look around for material for original crafts for your site. Having shown imagination and making a little effort, you will turn your site into a cozy relaxation corner or a fairy-tale kingdom.

Photo of homemade products for summer cottages and gardens

Landscaping a summer house will not be a problem and an expensive investment if you show a little ingenuity. It is not difficult to create homemade products with your own hands - it will take time, simple tools and fixtures. You can use the remnants of building materials, unnecessary boards, car tires, felled trees.

What materials are used

Any summer resident will not refuse the stylish decor of the site. Many firms offer original stuff. However, do-it-yourself crafts will help to give originality to the site.

Materials that are most often used in the work:

When decorating a summer house, one should not restrain one's imagination - bold combinations of materials and non-standard use of unnecessary things are welcome.

It is not necessary to observe proportions or natural color combinations. A giraffe may have purple spots, and a small engine may be small.

Original decor for the recreation area

Many townspeople acquire suburban areas for a relaxing holiday. It's nice to get away from the everyday life of the city and feel the connection with nature on the weekends. The design of a corner for relaxation deserves attention, it is advisable to fence it off from the agricultural work zone. A fashionable solution is the construction of small arbors from the remnants of boards. You will also need poles for supports and cross beams.

Sequence of work:

At the corners of the site, pits are dug 50-60 cm deep, where the bars are inserted and fixed with a solution.
Support beams with self-tapping screws are fixed at the upper ends of the bars.
Cross boards are fixed on the support beams. On the bars, the boards are fixed in a horizontal form, leaving gaps 5-7 cm wide.

A neatly cut lawn or a platform paved with stone - any options are suitable for decorating the site. To revive the structure, flowerpots with flowers are installed near the site or climbing plants are planted nearby.

How beautiful to arrange flower beds

Fragrant flower beds are the best decor for a recreation area.

It is easy to make non-standard flowerbed fencing from improvised means:

If there is a small amount of brick left, you can lay out a flower bed of any geometric shape in several rows. The solution will help to fix the structure and give it strength. Flower beds made of natural stone also look natural.
Car tires have long been a sought-after material in summer cottages. To give the flower garden a well-groomed appearance, it is advisable to paint the tires with bright paint and lay them out in several layers, forming flowerpots or lay them out on the site in a curved form, forming circles, ovals.

A couple of plastic or wooden flowerpots will help to give a non-standard look to an old bicycle. The transformation is done quickly: the bike is painted with bright paint, flowerpots are fixed over the front and rear wheels. A picturesque view of the structure will be given by climbing plants, the branches of which will skillfully disguise metal structures.

An old bathtub will not look like trash at all if it is transformed outside the box. Of course, the most straightforward option is to use a colorfully painted container as a reservoir.

However, meticulous and not lazy summer residents will transform the bath into cozy furniture for relaxation. For a miraculous transformation, it is necessary to cut out part of the side wall with a grinder, carefully grind the sections. Comfortable sofas ennoble: they are painted in the right shade, decorated with soft mattresses, headrests.

An impromptu flower garden in the form of a garden watering can, installed next to the sofa, will allow you to create a real relaxation zone.

Stylish garden paths

Rusted metal tanks or old wooden barrels can be turned into original flower beds or even peculiar beds that will successfully complement the garden paths.

Stages of work:

Barrels, tubs, thick logs can be called the most pleasant material for work. It is wonderful that objects can be placed not only vertically, but also horizontally, sawn in half or built multi-tiered structures.

Products do not need to be specially decorated - a colorful wooden texture will serve as the best decoration.

Do-it-yourself figured compositions

It is quite clear the desire of each summer resident to give the site unique view. In order not to spend money on the services of designers, you can create fun crafts with your own hands from improvised materials. Unnecessary garden tools, broken metal products, household containers, cobblestones and stones of different sizes - everything is used.

How to make metal decor

Creative decoration of paths, lawns will be unique figures assembled from old shovels and broken rakes, choppers. It is not difficult to create expressive images - the main thing is not to limit your imagination. To assemble a snail figurine, you will need literally a narrow sheet of metal, a can of canned food. Black paint will give the figure a laconic look and make it very noticeable against the background of a green lawn.

The original solution is to combine different materials when creating figures. The union of stone and metal looks elegant and natural. A playful look has a cat, assembled from rounded cobblestones of different sizes and metal elements. A stone pet is comfortably laid on a large stone to bask in the sun.

Flowers collected from table metal spoons will become a brilliant decoration of the flower bed. An impromptu flower garden will delight summer residents at any time of the year - rainy autumn and snowy winter. flirtatious and aerial view the flowerbed will give an umbrella assembled from metal tubes. Welding a structure at home is easy. To plant flowers, first make a frame of plywood or thick film.

Original do-it-yourself crafts made of wood

Wood products always bring comfort to the decor. garden plot. Wooden composition in the form of large porcini mushrooms will fit perfectly into landscape design site. However, you can give the fungus a playful look by using an unuprooted stump. A funny grimace on a tree is easy to depict with a chisel. And the hat can be made from a thick cut.

Decorative compositions assembled from wooden saw cuts or logs become a real work of art. The figurines of animals collected from old branches, sticks and several logs look playful. A more practical solution is the arrangement of flower beds from small logs.

Create a small flower garden in several stages:

The log is sawn into several equal parts, thin wooden cuts of branches are made separately to decorate the wheels.
In each element, remove inner part and separately from small boards they make an impromptu cabin of a locomotive.
Wheels are attached to the logs and the composition is laid on the site in the form of a train.

To make it easier to take care of the flowers, the plants are planted in separate pots, which are simply placed in the recesses.

Do-it-yourself functional homemade products deserve special attention - country furniture assembled from improvised materials. The easiest way to make items from sawn thick wood. It is enough to make a table from the base of the trunk, and less thick logs will take part in the creation of chairs. A small bench is assembled from individual branches and boards. It is not recommended to paint such furniture with colored paints - the natural wood texture, covered with a colorless water-repellent varnish, looks more elegant.

A popular option for crafts is animal figurines collected from tree cuts. You can assemble a composition from a couple of owls located on a stump. The stage of assembling homemade products created by oneself takes a little time: bodies are made from large saw cuts, on which round eyes and wings are fixed.

Do-it-yourself homemade products for a summer cottage children's corner

Any tree- best option for decorating a playground for summer cottages. Different materials will be useful in the work: logs, hemp, boards. Making crafts for a summer residence with your own hands is an exciting activity in which all family members can take part. Simple shapes, minimum details, bright colors- such figures look elegant and fun.

Easy to assemble figurines different materials. As an option - a set of wooden poles, tires from a car.

It is easy to build a figurine near the playground:

The tire is half dug into the ground.
A pillar 8-10 cm thick is dug in front of the tire.
On top of the logs, an impromptu muzzle from a small log is attached. Details of the figurine (tail, ears, eyes) are cut out of plastic bottles.
You can color the figurine for any animal.

In order for the child to have fun on the site, it is advisable to create not just decorative crafts, but gaming.

As an option, plywood figurines of animals are installed. Holes of different widths are made in the canvas through which balls can be thrown.

the solution is the design of locomotives from small logs of the same size. To build a structure, you will need logs, paint, tools.

Main stages of work:

Holes are made in the base logs (even number) of the same size.
The bases are laid out on the ground at equal intervals, painted in one color.
On the bases, logs are placed perpendicularly - “carriages”, painted with multi-colored bright colors.
To highlight the "engine", a pipe and a small bar - a "booth" are fixed on a log.

Flowerbeds decorated in small metal barrels, will give brightness to the playground. Kids will love taking care of the flowers planted in the colorful flowerpots.

Amazing crafts in the country - this is a great chance to give products a "second life" and decorate the site in an original way. A little time and diligence - and you can give functionality to a modern laconic decor or simply decorate the site with figurines-characters of your favorite cartoons.

Video about original crafts in the country

Do-it-yourself homemade products for summer cottages and gardens not only perfectly complement household plot but it will also save you a lot of money. To date, there are many useful devices for giving, simplifying everyday life. Usually, a large number of unnecessary things and materials are collected in the country house, which people do not use in their apartments. it takes up a lot of space. Any summer resident has the opportunity, by turning on his imagination, to make simple home-made items.

gardening tools

When visiting hardware stores, many buyers note that the quality of garden tools does not match their cost. Even an expensive and high-quality shovel is very easy to damage. One of the options is to personally make some kind of country tool that can perfectly replace an ordinary bayonet shovel. for example, a garden digger, which is not only very easy to manufacture, but also convenient to use. If we compare an ordinary shovel and this country tool, it can be noted that the latter is much easier to dig the ground, and it does not exert heavy loads on the human spine.

To make a digger for a garden with your own hands, you need those items that often lie and gather dust in the country. Must have:

metal sheet 2 mm thick;
metal pipe 0.5 inch in diameter;
2 bolts and 2 nuts;
2 engraver washers for bolts and 2 hours of free time.

You need to cut a metal sheet into 7 segments that look like stakes. That is, you should get a stake, wide on one side, and tapering to the other. Then, a pipe 43 cm long is taken, 5 mm is measured from the edge on it. The following marks are made every 6 cm. Another 5 mm should remain on the other end of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

Cut out stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and seized by welding. Then the remaining pipes are welded into a U-shaped handle and bolted to the workpiece. That's all, the kopalka is ready to use.

Garden decoration

We should not forget about the opportunity to become a designer of your own garden in the country. After all, you can make not only country tools, but also much more. And to add zest country house, you can lay out a beautiful and original garden path from stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

a stone with which the path is laid out;
sand;
gravel and board 25-30 mm thick.

Work should begin with a preliminary measurement of the distance of the future track. To do this, four pegs are hammered, which are connected in pairs with a guide rope. After, you need to remove upper layer soil, or in other words, dig a trench. While working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically Construction Materials, but will also simplify subsequent work. Along the edges of the trench, you need to install boards, they will act as bumpers into which sand and stones are placed.

At the bottom of the recess, gravel should be filled first. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage. ground water. Next, the gravel is covered with sand, which should be moistened in advance - so it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm or more, and after that, you need to level the surface of the embankment with a board. Only after that you can lay stone or paving stones. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone once again.

Traps for mosquitoes

The invention does not fight mosquitoes, but their larvae. It hangs on tree branches. Mosquitoes lay their offspring in this device, which does not allow the born mosquitoes to leave it. For more effective fight with bloodsuckers, you should make as many of these traps as possible. But even using this gadget cannot provide 100% protection against mosquito bites.

One of the most simple ways is to use the usual plastic bottle as a trap. It is necessary to cut off the upper part with the neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this, you need 15 g of yeast, 45 g of sugar and warm water. All 3 components must be mixed and pour the resulting solution into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap is able to attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in a residential area.

These were only 3 of the most interesting and easily manufactured devices for summer cottages and gardens. Do not forget that a person can create something more useful and unique from improvised means, you just need to give free rein to your imagination.

The private sector is for many associated with hard, full-time work. Plant a garden, monitor the growth of plants, harvest. All this, of course, must be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be plenty of free time for recreation. And do-it-yourself homemade products for the garden and summer cottages, made with their own hands, will help in this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the very process of making something useful from improvised materials can bring a lot of positive emotions.

Russian people have always been distinguished by resourcefulness and ingenuity. And a huge number of do-it-yourself homemade products for summer cottages and gardens, photos of which can be found in our article, are proof of this. We will offer for consideration only a few options that will be useful in any area.

Flowerbed-box

Many gardeners have recently given preference to flower beds located in boxes. They are elevated above ground level and fenced on all sides. Thanks to this, the care process is facilitated, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such constructions on meager nutrients soils.

Homemade for the garden involves the use of improvised materials. Therefore, for the construction of the box, you can use boards left, for example, from building a house. If they are not available, you will have to purchase them in the store. Of these, a box of arbitrary sizes is constructed. Dimensions will depend on the size of the site, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer fertile soil was thicker.

A metal mesh with a medium-sized cell is fixed to the bottom of the manufactured box. It will protect against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. From the bed-box you can easily make a small greenhouse. Its height is chosen taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. This will require a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections(tees, clamps, and so on).

The barrel is raised approximately 1.5-2 m from the ground. For this, a special stand can be welded from metal corners. Thanks to this, the system will have a stable pressure. From the barrel comes the main hose. A filter must be installed on it so that debris does not clog the system. Capillaries are fed from the main hose.

Do-it-yourself sprinkler

Homemade products for summer cottages and gardens will allow you to create something necessary and useful on the site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for the garden. It will allow you to process and water plants of various heights. A sprayer is attached to the watering hose. To a long stick (the longer, the better), the same atomizer is screwed with the nozzle up. The lever is fixed with a thread in the pressed state.

In a 1.5 liter bottle, a hole is made in the neck with a red-hot nail. A bolt is inserted into the hole and secured from the outside with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle unwinds and water is sprayed.

Tire compost pit

old tires from cars are one of the most popular and affordable materials for making homemade garden products. You can even make a compost pit out of them. You only need 4 of them.

One of the tires that will serve as the base is cut. One side is cut off. From the rest, two sidewalls are cut off to make rings. Next, you just need to install the tires on top of each other in the designated place.

Bench

After all the work in the garden, you can relax. And on this account, you can also choose suitable option handmade homemade products for summer cottages and gardens. With a small set of tools and materials, you can make an attractive streamlined bench. It will become a place where you can relax and unwind.

From the materials you will need:

A sheet of plywood (preferably from pine) measuring 90 x 90 cm and 1.6 cm thick.
Reiki from the same tree in the amount of 7 pieces (2 cm thick, 9.4 cm wide and 140 cm long).
Boards 2 x 6.9 cm and 100 cm long in the amount of 3 pcs.
Boards 2 x 6.9 cm and 140 cm long in the amount of 9 pcs.

The parts will be fastened with self-tapping screws 0.5 x 5 cm. In addition, glue for connecting wooden elements, wood varnish, turpentine will be useful.

The plywood sheet is cut into three pieces. A template is drawn on them for cutting the sidewalls and the central crossbar. The shape is cut with a jigsaw. On the back, 3 notches are made for the rails that will hold the structure.

Homemade products for the garden will help make your country life more pleasant and easier.

Do-it-yourself drawings of homemade products for summer cottages and gardens will be useful to everyone. A dacha is the ultimate dream, if not of any average person, then of every second person for sure. Not everyone, of course, will be lucky enough to become the owner of suburban area, but those who are still lucky need to constantly monitor and ennoble it, which requires considerable costs. Do-it-yourself homemade products for summer cottages and gardens help to maintain your dacha in impeccable condition. Today we will tell you a few secrets on how to save money on buying the necessary things for a summer residence and make them at home. Of course, not everyone can do a grader with their own hands or self-propelled guns for a tractor, but most homemade products will definitely come in handy on the farm.

Do-it-yourself variator for a machine

If you need to constantly work behind the machine, then the frequent change in speed leads to wear on the unit and has the additional disadvantage of regularly stopping the machine. As an alternative, you can use a homemade variator for the machine. It can be made from wood with your own hands, without a significant investment of time and money. Variator cones are made of hardwood, and it is not necessary to use a lathe to make them, you can cut them with a jigsaw at an angle, equal to the angle cone slope.

If you will assemble a cone from disks, then they must then be glued or nailed. Ready-made cones are planted deep on metal rods, while they are attached with screws. In order for the belt to move evenly on the machine, roller guides are required. Rollers can be taken from furniture fittings, but if they are not available, ordinary bearings can be used.

An old washing machine is a real treasure

If there is a working engine from washing machine, then this is a very valuable find, since many useful devices in the household can be made from it. The easiest way is to make an excellent emery for sharpening knives, various tools and drills from the engine from the washing machine.

The main problem in the manufacture of fixtures is the fastening of the stone for sharpening on the engine housing itself. In most cases grindstone has a hole that does not fit the motor shaft. That is why you need to make a flange that, on the one hand, can be pressed onto the shaft, and on the other, will have a thread, which will allow you to screw in and secure the grinding wheel.

Image 1. Emery device from the engine of an old washing machine.

Experienced craftsmen recommend that beginners use old pipe cuts 32 mm and no more than 20 cm long as a flange. We make a thread on one piece of pipe, which should be 2 times the thickness of the grinding wheel in its length. The other end of the pipe is heated with a soldering iron and put on the shaft. To better hold the pipe, it can be bolted. After that, they take 3 nuts and screw them onto the flange from the side of the thread until they stop, then put on a washer and, finally, a grinding wheel, then again a washer, fix it with a nut. At the end, you can also add a locknut.

The hardest work is done, after that it remains just to fix the engine, but this is a very individual procedure, since it is not known what holes are on the engine from your washing machine for fasteners. Based on them, you need to make a stand, it is best to use small corners, fastening them together and placing emery on a workbench. The final step is to connect the engine to the mains. You can look at the finished version of the sharpener in the photo, the drawings are also attached (image 1).

Image 2. Grill from the drum of a washing machine.

Homemade products for summer cottages can also be made from other parts of the machine, for example, an excellent barbecue can be made from a drum. Drum in washing machines made of stainless steel, which in itself is important, since the case is very strong and reliable. It is very easy to make homemade products for giving from a drum, you just need to remove it from the body of the machine, but along with the shaft and pulley. We put the pulled-out drum with the hatch up, and with the wheel down. So the brazier is ready, with the help of a grinder, you can, of course, cut the front of the drum or side to make it more convenient to throw firewood, but it all depends on your free time and imagination. This improvised brazier looks very neat, while the drum is littered with small holes, which allows air to be evenly distributed over the coals and provide the necessary heat (image 2).

Manual circular saw from grinder

Image 3. Scheme of the device of a circular saw.

A circular in the country is a very useful thing, few people know, but you can make it from a grinder. You will have to complete only 2 elements: a sliding stop and an axial handle. After that, you can use your circular saw from the grinder at any time.

2 small pieces are suitable as a sliding stop metal corner. The edges of the corner are rounded so that they do not catch on the part during processing. The corners are interconnected at the back and front with bolts or nuts. On the body of the above power tool itself, you need to put on a clamp made of metal tape. To the screw tie of the clamp, which will be located below, a double-folded strip of tin or galvanized steel with a hole for the rear bolt of the sliding stop is attached.

In the gearbox of the grinder, we make 4 small holes for the M5 bolts. For convenience, the gearbox can be disassembled first to better see where the hole can be made. These 4 holes are needed in order to attach the handle. The handle can be made from an ordinary metal tube. On this manual version grinder saw is finished, if you want to make a real stationary version of a circular saw, then you will need more skills in work, tools and well-calculated drawings (image 3).

Agricultural equipment and devices

Agricultural machinery is a very important tool in the country, without which no owner can do. Agricultural machinery today costs a lot, and you don’t really want to spend a lot of money on a thing that is rarely used, but you can’t do without it. One of the most popular devices is a wheelbarrow, it can be made from improvised means, thereby saving a lot of money. To make it you need:

Image 4. Drawings of a homemade cart.

wheel, preferably made of rubber;
plywood;
2 corners;
wooden block, 3 m long;
nuts and an axle from a bolt.

The technique for making this tool for giving is very simple and will be clear even to a novice master, the main thing here is to measure everything clearly, because if you do it by eye, it will turn out crooked. Wheelbarrow drawings are attached (image 4).

No less popular tool for a summer cottage, which in winter time will help get rid of snow, that is, a shovel can also be made from plywood. You will need:

plywood 10-12 mm thick;
wooden handle;
nails;
steel plate 4-6 cm wide.

Plywood will serve as a shovel bucket, and the timber will allow you to hold the handle. The front and back of the plywood are edged with metal - the future bucket.

A rake is often required to process the garden. To make them, you will need a wooden block 35 by 35 mm. The length of the handle can be cracked at your discretion, but it is not recommended to make it too long, as it will be difficult to use it. In addition to the bar and handle, you need to make at least 4 metal teeth. Metal must be taken durable so that it does not bend to the ground during operation. You can use metal from an old shovel, cut teeth with a grinder. The teeth are leveled with a hammer and holes are drilled for the screws. Then the structure is fixed.

Video about making a do-it-yourself cart:

Garden sprinkler design

Homemade agricultural equipment also includes garden sprinklers, which can be made almost from the waste that everyone has in the house. To irrigate your garden you will need:

spray;
rubber hose 3-4 m long;
plastic one and a half liter bottle;
pump;
wooden or metal stick of any length, but the longer the better.

The sprayer is screwed to the top of the stick with a nozzle so that the lever is pressed with the help of nylon threads. Tape firmly so that the sprayer does not move. After that, we take a plastic bottle and use a hot nail to melt a hole in the neck. Then we push the bolt into the melted hole and fix it with a nut from the outside.

Before inserting the bolt, drill a through hole in it with a simple 3 mm metal drill. The hose is put on a bolt and secured with a small clamp using a screwdriver. We attach the second end of the hose to the pump and again fix it with a clamp so that everything is airtight.

Poison is collected in the bottle for spraying beetles or water for watering the crop. Screw the container to the top of the spray gun, which is attached to a stick. Next, with the nozzle closed, we pump up the pump a little, after that we unwind the nozzle, and the sprayer starts working. In this way, you can spray trees of any height and large beds, if necessary, you can simply put the device on the ground and pump up the pump from time to time.

You can even make small greenhouses from a film in the country, you only need to drive a metal rod or stick into the ground and fix a plastic film in the form of a cone on the base.

Video about the drip irrigation system using a plastic bottle:

From below, the film is fixed in a circle from old barrel or set with stones.

Conclusion on the topic

Now you know how to make expensive tools for a summer cottage without a significant investment of money, time and nerves. The main thing is not what you use to improve your site, but the fact that you should like the work and stay in the country should bring joy.