How to make crafts from car tires? A cup of tires How to make a tea pair of tires

The desire to ennoble the summer cottage, transforming it into an attractive cozy corner for a comfortable stay, is quite natural. Favored by many gardeners, flower arrangements are a perennially popular element. landscape design suburban areas. A worthy frame for such compositions are often flower beds made of tires, which are one of the easiest to create and practical products to use. Of course, you can buy ready-made flowerpots in specialized stores. But flowerbeds made from tires with their own hands are not only a beautiful and functional design element that gives the design of the site exclusivity and uniqueness, it is, first of all, the pride of every summer resident.

How to choose the right tire?

It's great when there is a choice. When choosing between old tires of a domestic manufacturer and imported products, preference should be attributed to the latter. Imported waste tires have softer and thinner rubber, which is much easier to work with. If you choose between "summer" and "winter" tires, then the winter version is more suitable for work.

Deciding to create original flower beds from tires with your own hands, turning old used tires into street vases of bizarre shapes, you need to prepare the source material in advance and think over its design

To make a flower bed old tire, it is desirable to choose wheels with maximum tread wear. The worn tread layer makes the product softer and makes it much easier to turn it inside out.

Tires contaminated with earth and sand must be cleaned. And it’s not even that it’s more pleasant to work with a clean product. It's just that when working with dirty tires, the blade of a knife and file becomes dull much faster.

Manufacturing step by step

Before you start making a flower bed from a tire, you need to think about how the finished product will look like: a bowl with smooth edges, a flowerpot with a wavy cut line or a flower bed in the shape of a large flower bordered with petals or fringe.

The drawing, along the contour of which the cut line will be drawn, is applied to lateral side products

Thinking over the shape of the cut, it is necessary to be guided by the fact that the result should be a construction according to the “pot - lid” principle: a deep lower part and a cut off upper part. Around the entire circumference, the contour is easily applied with a felt-tip pen or chalk.

The edges of the cut, made with wavy lines or designed in the form of teeth and fringe, look interesting.

Stage # 2 - cutting along the contour

Thinking over how to make a flower bed out of an old wheel, decorated in the form of a large flower, it is necessary to cut petals along the edge of the product. The size of each petal should not exceed 10-12 cm. Otherwise, when the tire is turned inside out in these places, the rubber simply will not bend, and the flower bed will not take an even round shape.

A shoe knife can be used to cut the wheel. A well-honed tool will significantly speed up the work

You can make the cutting process easier by using liquid soap for lubricating a knife blade.

Great if you have a jigsaw handy. With the help of a jigsaw, it is convenient and quick to perform curly sawing.

The mechanization of labor is described in detail in the video:

After cutting the tire along the contour, it is necessary to make longitudinal cuts along the grooves of the tread at a distance of 5-10 cm.

Stage #3 - tire eversion

When creating a flower bed on a leg of wheels with your own hands, the first step is to turn the rubber tire inside out. For many craftsmen, this stage of work becomes a real stumbling block. The process of turning the rubber itself is a rather laborious process.

In order to cut the metal cord, it is necessary to make several cuts along the outer side with the help of a grinder. Cut through the rubber smoothly. The contact of the disk with the cord can be judged by the plaque formed on the surface of the product and the white smoke emitted. Make cuts at an equidistant distance of 15-20 cm.

After spending preparatory work, you can start turning the tire inside out. Before you start turning the flower bed tire inside out, we would like to tell you one secret: it is enough to turn at least a small piece of the tire inside out, and the work will go “like clockwork”.

The turning process is well shown in the video:

A flowerbed of old wheels is ready, you can start decorating it.

Finished product design

Creating and growing flower beds in black forms is not entirely aesthetically pleasing. Therefore, as soon as the flower bed was given the desired shape, you can start decorating it. Until the outer surface of the inverted flowerpot is covered with a layer of dust, it is desirable to paint it.

Painting is the easiest and most affordable way to design a black rubber flower bed.

Oil, enamel and nitro paints are excellent for painting rubber products. On a clean rubber surface, the paint lays down in an even layer and lasts for quite a long time. You can also use leftover car paint to paint the flower bed. By using aerosol can the job can be done in just a few minutes.

The use of light colors of colors in the design of the flower bed will prevent overheating of the earth inside the container.

The combination of colors looks interesting when the base of the flower bed is decorated in one color, and the teeth or petals in another

Most craftsmen paint the rubber flower bed only from the outside. But still, in order to give the container a more attractive look, it is advisable to slightly capture the upper part of the inner surface of the product.

In the design of the flower bed, you can give complete freedom of imagination. Glass aquarium pebbles glued to the petals of the flower bed will create the illusion of dew drops.

If you want to further decorate the flower bed, you can apply an ornament of a different color on top of a plain layer of paint. But you should not be especially zealous: with the violent growth of flowers, the pattern of the flower bed can be completely covered with hanging or creeping plants.

Minimum costs, a little free time - and a chic decoration for arranging suburban area ready

Such a flower bed will be a worthy addition to the interior and an element of landscape design of the cottage. It remains only to fill the container with a layer of soil and plant your favorite flowers.

Any owner of a summer cottage would like his territory to be the most beautiful and unique in comparison with neighboring plots. Although in our time, stores offer a large assortment of decorations and materials for decorating the site, you can still draw up your plan yourself, saving your money on this. In this article, we will consider one of the options for how you can make a unique decoration yourself, namely a flower bed from old tires. This flower bed is in the shape of a large cup.
For this work we need:
Two tires;
Metal profile (50 - 60 cm);
Scissors for metal;
Plastic bottles (at least three);
Screwdriver;
self-tapping screws;
Shoe knife;
acrylic paint;
Tassel.

To make this flower bed, we need two tires. One of them must be smaller. Such old tires can be asked for free at any tire shop.

As shown in the illustration, the side of the tire needs to be cut off. This can be done with a regular shoe knife. As a result, we get three elements.

The next step is to make a handle for the cup. To do this, we need a metal profile, as well as metal scissors. Retreating every 10 cm, it is necessary to make cuts in the side of the profile. This is necessary in order to make it comfortable to bend. The edges of the profile must also be cut and bent in such a way that it is convenient to screw it to the tires.

Next, using metal screws and a screwdriver, you need to screw the handle to the bottom and top of the cup (to the top and bottom tires). These two tires also need to be fastened together. This is done using self-tapping screws on the inside, as shown in the illustration.

The end result is a cup like this. Please note that the third element, which was cut from the side of the large tire, is the base of the flower bed, and plays the role of a saucer or stand.

After the cup is ready, we proceed to decorate it. For this we need 3 or more plastic bottles, namely their lower part. You can cut the base of the bottles with a construction knife and scissors. Thus, we will get flowers that can be painted in any color you like. Using one self-tapping screw, you need to fasten the flowers to the top of the cup.

The next step is painting the flower bed itself. Acrylic paint is the most suitable for these purposes. Its advantage is that it retains its brightness perfectly and does not fade over the years. Here you have the opportunity to show your imagination, and use the tones that you like. final stage work will be filling the bowl with earth. Then you can plant flowers in it. This flower bed will be a great decoration for your summer cottage. Its manufacture is not difficult, and if available necessary tool, such a cup can be made in just a few hours. This element can bring creativity to the design of your territory, as well as surprise and amazement of those who pass by this flower bed.

It has long become very popular to use secondary materials for arranging your site: tires, bottles, old dishes or household items. This allows you to save your own money and take care of the cleanliness of the environment. In this article we will tell you how to make an interesting flowerbed of tires with your own hands.

When creating crafts from tires, remember:

Since there is a wire inside the rubber from which the tires are made, in order to cut it, you should take metal scissors. You can also use electric jigsaw or Bulgarian. Imported winter tires lend themselves most easily to various manipulations.
If you cut the tire with a knife, then in order to make it easier to work and the tip does not dull quickly, you need to constantly moisten the blade in soapy water or the rubber itself with liquid soap.
Before painting the workpiece obtained from the tire, it must be washed with detergent, then wiped with a solvent, and only after that paint can be applied. For these purposes, it is best to use weather-resistant species, and then it is still worth fixing with a couple of layers of varnish.
If you are making a hanging flower bed out of a tire, then in order to avoid waterlogging of the soil and rotting of the roots of flowers planted in them, several holes should be drilled in the bottom of the tire. This will allow excess water to flow out after watering.
If you need to turn the tire inside out, then first you need to bend it in half. After that, it will be easier to turn it out.

There are many options for making flower beds out of tires. Most often, a cascade, a pyramid, a free-standing flowerpot or an animal are used. The first two types are very simple, nothing needs to be cut to create them, while the second ones, on the contrary, are complex, they require a certain skill in making figures from this material.

If you want to decorate your garden with an unusual flower bed, then you can make it in the form of a tea cup or teapot, and you will now learn how to do it.

Master class on making flowerbeds from tires in the shape of a cup

You will need:

3 wheels of different sizes: from a truck, from a lawn and from passenger car(13 size).
Tools: hacksaw, pry bar, sharp knife, screwdriver.
Self-tapping screws.
Brushes, foam sponge, stencil and paint: red and white.
plastic pipe up to 4 cm in diameter.
Soap solution.
Solvent.

Progress:

As you can see, our mk for making flowerbeds from tires in the form of a cup is not at all complicated, which means that everyone can bring such a project to life.

A cup and saucer made of tires, you say is not possible? Everything is possible in our time, the main thing is to have a little imagination in your head and junk materials. Good afternoon, visitors to our site, probably everyone has already begun to put things in order in their areas. And of course, we not only put things in order, but also decorate our territory with various figurines and crafts. After all, we want to be not only clean but also beautiful. Masters know how to create beauty on their site, coming up with various ideas for it.
Previously, most craft lovers created mainly swans from tires. But time moves forward and now you can rarely see such crafts. Comparing the needlework of people with the past year, I came to the conclusion that many began to make more animals from tires, such as a bear, a bunny, etc. But it was also very common to see cups and saucers made of tires. I even decided to make a video on this topic and collect a small collection of cups, but it's still in development))) Each author's cups turn out beautiful and interesting in their own way, someone decorates the cups with flowers, and someone just paints them beautifully. Today we will consider two small master classes on making a cup and saucer with our own hands and making a teapot, the author is Irina Nikulcha and Tatyana Leksina. Irina has already shared her work with us, it was. Unfortunately there was no master class, but there was detailed description manufacturing. But last year, Irina specially created a small master class on making a cup of tires for our website and shared the manufacturing process not only in words. Irina also made a cute teapot out of tires, which she placed next to the cup.

Cup (mug) and teapot from tires

For manufacturing we need:
* Tires of different sizes.
* Self-tapping screws.
* Corrugation for electrical wiring.
* Dye.
* Artificial flowers.

How to make cups and mugs from tires:
The cup is made of three tires (wheels). To make it, we need three tires of different sizes, the first tire is the smallest from the scooter and two large tires, one slightly larger than the other. This will be necessary in order for one bus to go over another. Tires all first need to be cut but only on one side and turned out, and then we already begin to assemble the cup itself.

First we will make a saucer: for this we cut off the top from the largest tire and put it in the place where you want to make a mug. But it seemed to Irina that the saucer turned out to be small in size, and therefore she added more strips to it so that the mug looked better later. I added stripes from cut tires, you need to cut them into small pieces, about 20 cm each, so that they fit better to the main tire and fasten them with a stapler to each other.

From the smallest tire from the scooter we make a leg. Then we install a large tire on it and a little smaller one in it. We fasten in four places with self-tapping screws for strength. Irina made the handle from corrugation for electrical wiring, inside there is aluminum wire for shaping, we fasten it with self-tapping screws for strength.
Well, that's all, it remains to paint as you wish. Daisies Irina masked the joint between the tires. Daisies are purchased, but can be made from disposable spoons or plastic bottles, we attach them with a furniture stapler to our cup. That's all, such a nice cup of tires turned out.

Do-it-yourself tire teapot

The teapot, like the cup, is made of three tires, one from a scooter, two of the same diameter. Tires need to be cut and turned out. At the very bottom we lay the cut out middle from the large tire. On it we put a tire from a scooter wide to the bottom, put the first tire on top with a cut-off place at the top, and the third on the second cut to the bottom. It is necessary to fasten the second and third tires together. Irina's husband laid with inside a piece of lining and screwed it on the front side with self-tapping screws. Then put another middle from the cut tire to the very top. The handle is made of corrugated for electrical wiring, and the spout is cut out of polyurethane foam. Daisies also decorate the joint between the tires. All the tire kettle is ready.

DIY tire mug

And here is another nice tire mug, also made by hand, the author is Tatyana Leksina. Tatyana also told us how she made her mug.
Tires before use must first be selected by size, and then rinsed well. We paint each wheel individually with oil facade paint. When they dry well, we put them together. Tatyana's husband also helped in the manufacture, he cut a hole for the handle and then inserted a corrugated tube into the hole. Still one mug of tires is ready, you can drink tea))) The cup has wintered well, now Tatyana decided to make a spoon and put it in a cup. He plans to make a spoon from a children's ski and paint it with red paint.

Do not want to drink tea in the country on outdoors? And I, looking at these photos, really wanted to drink the freshness of the air, the aroma of flowers, and pure water from these charming sets. And mugs and even tea sets in this case are unusual and very attractive forms of tire beds. If earlier, when organizing a flower bed, the tire was simply laid on the ground and covered with humus, in some cases it was painted or whitewashed, but now our gardeners and designers use the most daring and original solutions for decorating the garden landscape. And they do it excellently. And cheap and affordable material is even more attractive to gardeners. The technology for making flower beds from tires is simple and allows everyone to make beautiful curly flower beds with their own hands, which will serve as a real decoration. garden plot. And thanks to the invention and imagination of the masters, we have the opportunity not only to see these unique masterpieces, but also to repeat them in our dachas, including the theme of home tea drinking.

Tire mugs, is it really possible to make your own hands?

Flowerbeds made of tires on the theme of home tea drinking evoke a feeling of delight among guests and passers-by. As an example, we offer you to look at some photos of these wonderful mugs and tea sets from tires. And the main advantage of such flower beds lies not only in beauty and originality, but also in ease of manufacture and practicality. The process of making such a flower bed is extremely simple.

Several tires stacked on top of each other in addition to simple details from pipe scraps and old bent pieces of metal tape or a piece of flexible plastic tube for a pen, an old basin, painted in bright colors, perfectly play the role of a teapot and cups. The basin serves as a saucer for the cup, only the basin will need to be taken in a larger size than tires. Yes, and tires are also desirable to take a little different diameter, then the cups and teapot will look much more interesting. And it is better to connect the tires to each other with self-tapping screws. Particular attention should be paid to painting the flower garden, the aesthetic side of your creation depends on it. Make these crafts and enjoy plenty of beautiful views of your garden plot.