A guide on how to make a pool of tires with your own hands. How to make a water container out of old tires. An ordinary sickle will help

Old tires are not just obsolete rubber.

This is a valuable high-quality secondary raw material. Reliable, strong and durable.

You can get tires free or very cheap.

Tires can be used to create many useful things.

Of these, you can create a small reservoir of tires with your own hands for a summer cottage or garden, namely:

decorative pond;
pool;
fountain.

Let's figure out what is needed to create such reservoirs.

To create a small decorative pond, it is quite enough passenger car tires.

Tools

In our work we will use:

two shovels (bayonet and shovel), as well as crushed stone and sand;
building level and jigsaw;
waterproofing material to cover the bottom; the best option— special cover for swimming pools;
small boulders to beautifully decorate the banks of the pond;
plants for ornamental ponds.

If you want to create not just a decorative pond, but a real swimming pool, you cannot do without large KAMAZ or BELAZ tires.

Operating procedure

First, remove the top of the tires. Best cutting tool electric jigsaw . It should work at low speeds.

An alternative but less effective tool is hacksaw for metal. It will take an order of magnitude longer to remove the tire top.

Now create a recess for the pond:

first of all, we level the territory for the future reservoir;
then we dig a recess for the tires to create the base of the pond; around the entire circumference we leave a small space for the allowance - the tires should not sit tightly in the recess;
put tires; using the level, we check how horizontally exactly relative to one another they are all stacked.

Pond it is better not to build in the sun, otherwise the plants in it will wither, and duckweed will cover the water.

In the shade of big trees building a pond is also not worth it - clog up quickly twigs and leaves.

The ideal place for him is partial shade.

To prevent the pond from leaking, you will need special materials that cover the bottom of the pools. As a cheap and not very reliable alternative suitable pvc film.

The shelter should completely cover the tires and extend approximately 0.5 meters beyond their edges.

We carefully spread the bottom cover and fasten it to prevent it from slipping. For this you need to press down the edges with boulders or cover with rubble.

sprinkle the edges of the shelter with a small amount of sand;
around the edges of the recesses we put boulders and pebbles - we create “shores”.

Stones are best laid out like this - place large boulders below, smaller ones on top.

The “membrane” itself can also be slightly decorated with small rounded pebbles so that it does not catch the eye.

Gravel and sand are not used for decoration. They make the water very cloudy.

And finally, we plant plants and pour water. The pond is ready.

Fountain

A fountain made of tires in the country is a wonderful element of decor that will add coziness and surprise guests. Making it yourself is not at all difficult.

Tools

To make a fountain, you will need the following tools and materials:

large tire (from a truck or tractor);
shovel, cement mixture(in a dry finished form), as well as a container for its cultivation;
a mixture of sand and gravel;
mastic for waterproofing and a pump for pumping water;
reinforcement in the form of rods, a thin iron sheet and metal posts;
scissors for cutting metal.

It's good if you have more on hand. building level- the product will come out more accurate and verified.

Procedure

The fountain is created like this:

First, we pull out a shallow funnel-shaped pit, whose size should be slightly wider than the diameter of the tire.
We fill the bottom of the pit with a pillow from the mixture sand and gravel.
On the pillow we pour cement- the future basis for the foundation. Its height should be approximately 10-12 cm. How horizontally even the base is, we check using the building level.
When the base has a good grip and dries to the bottom of the pit, we begin to “hoist” a tire on it. But first, on one side, we slightly shorten its upper part.
We will protect our giant tire from leaks with the help of rubber mastics for waterproofing. Pour its thick mass into the middle of the tire. pour a little - a small layer of it is enough for waterproofing.
Use thin sheet iron around tire circumference create formwork.
We stack reinforcing bar and fill with cement mixture.
The edges and bottom of our fountain decorate all the same small non-sharp boulders and pebbles.
Well, in the middle of the fountain put the pump with a special nozzle to spray water.

Wheel pool

As in the case of the fountain, the pool needs a large tire of some sort. trucks or large special equipment.

The used tires of the Belaz dump truck, L-170 or T-150 tractors are perfect. A popular option is from the K 700 tire.

materials

To create a pool from a wheel, we take the following materials and tools:

half a bag of cement and sand;
some laundry soap;
a hacksaw, as well as a well-sharpened knife;
paint and stones for decoration.

Process of creation

First we prepare the tire. one of her cut off the side with a sharp knife. We leave only the side. For the pool, such a shortened tire is quite enough. To make it easier to wield a knife, we lubricate the place on the tire where we are going to cut laundry soap.

Now we are preparing a place where we will put the tire.

To start we clean the site: remove the roots of trees, level the soil with a rake.

Then dig a hole. There are several options, depending on how the future reservoir appears:

If you need him to be partially dug in, depth and diameter should be approximately two thirds of the diameter and height of the shortened tire. When dug, we create a 15-centimeter gravel or sand cushion at the bottom of the pit so that it takes on the pressure of the tire and water. The pillow is well aligned.
If you want the pool was not buried, we make the pit wider than the tire diameter by approximately one spade bayonet. We fill such a recess with sand and carefully tamp.

Be sure to use cement (it will need 2-3 buckets) we strengthen the loose circumference of the recess.

Next, we put a tire in it, and in the hole pour one and a half buckets of cement. The binder material must be carefully leveled to seal the future pool, remove all cracks and protect it from leaks.

The cement will dry and set well in 2-3 days.

drain cock

It is necessary to create a special tap to drain and replace water in the pool. We will need:

a pipe with a faucet and a corner for a pipe;
washers (large diameter);
nut and locknut (second nut to be screwed onto the bolt).

The drain cock is most conveniently placed on the side at the bottom of the tire:

we attach a corner to the pipe with a faucet;
make a small hole at the bottom of the tire;
we cut the pipe, connect it with a nut, a lock nut and a large diameter washer.

Decor

Now it remains to paint the pool and lay out the stone wall. In the photo, a decorative springboard is also laid out of stones. The pool is covered with a protective mesh.

This video is about creating a film pond using an old car tire:

Conclusion

It takes quite a bit of effort and patience to recycle tires wisely and create beautiful and useful water bodies from them. Do-it-yourself ponds and pools for summer cottages will please the eye for many years to come.

If there is a desire and tires remain, you can not be limited to a reservoir on the site: old rubber is useful for creating, and even.

In contact with

The idea to build an artificial reservoir in the country comes to the mind of many land owners. Undoubtedly, such a source of coolness and positive emotions will please not only the owner himself, but also his guests, becoming a real highlight of the landscape. The mere sight of the water surface helps a person to relax, tune in to a lyrical mood, causes bursts of inspiration. But, having critically assessed only six acres of their own land, some give up their dream. But in vain! We will tell you about how to bring it to life by making a mini-pond from a tire with your own hands in the country, and at the same time recycle old rubber that is unnecessary on the farm.

A decorative mini-pond should please and attract everyone's attention. Therefore, the place where it should be located should be chosen very carefully. There are several rules that we recommend that you follow so that the choice is successful:

The pond should not be constantly in the sun. Penumbra - the best place for him. Otherwise, the plants will be too hot, and they will begin to wither, and the water will bloom quickly.
Open and ventilated places are also not the best option.
If you build a pond under the crowns of trees, the water will constantly become clogged with leaves and small debris. The cleaning process will become regular and tiresome for you.

It is good if the pond is clearly visible from different viewpoints. Let beautiful objects be reflected in it: running clouds, a house or trees. Know that small bodies of water look best when viewed from above. Therefore, they are often placed in natural landscape depressions.

In such a place, the mini-pond will be clearly visible from different viewpoints. In addition, it will not be under constant exposure to direct sunlight.

If you doubt your own choice, arrange a test for yourself. Take a piece of polyethylene that will represent a mini-pond and place it in the place of your choice. Walk around the site and see how well it can be seen from the main viewpoints.

Where can I find the right tire?

Before looking for a tire, let's decide what exactly we want to find. If there is a catastrophic lack of space on the site, then to make our dream come true, it will be enough for us to find a tire from any car.

To implement a large-scale project, the size of the wheel must be impressive. After all, there are wheels whose diameter exceeds human height. Using them as a base, you can build a whole lake!

Tires come in different sizes. It is not so difficult to find such a Gulliver among them, and it is hardly necessary if the size of the plot does not exceed the standard six acres.

For large objects, you must have:

tire from KAMAZ;
rear wheel from the tractor "Belarus";
tires from the mighty BELAZ.

If your own unnecessary tire is not lying around in your garage, then a suitable copy can be found in a tire shop. There often accumulates unnecessary rubber to be disposed of, so you will get it for free.

Used tires can also be found at car dealerships. It is possible that you will have to pay there, but purely symbolically. Ordinary car owners can also offer what you are looking for. So check out their ads as well.

What will your reservoir be like?

In a tiny reservoir, it is unlikely that you will be able to get fish. Although goldfish from an aquarium can feel good in a small artificial pond. However, this building can be decorated in other ways. For example, Siberian iris can be planted along its banks.

Perfect companions for any pond

water lilies;
swamp turkey;
floating pond.

In the end, you can also use artificial decorations that imitate the same lilies, but do not require attention. Small imitations of ducks can look good on its surface, and turtles along the banks.

Plants planted around an artificial reservoir can completely transform it, turning it into a favorite vacation spot for all family members.

The rubber base should be securely covered with decorative flagstone so that it would never occur to anyone how a mini-pond formed on your site. Often, small alpine slides become companions of water structures, which, by the way, solve the problem of creating a shadow.

To provide additional effect, you can highlight the structure with solar-powered garden lights. All the energy that they accumulate on a sunny day, they will use up at night in the form of a soft, mysterious glow.

Pond decorations also have their downside - they attract the attention of kids who love to play in such a fabulous place.

Whatever your mini-pond, you should remember that for small children left unattended, it can become a source of danger.

Step by step instruction

Any work is preceded preparatory stage. We need to put together all essential tool and material in order to be distracted as little as possible in the process of performing work.

Stage # 1 - preparing the tool and materials

We don't need a lot of tools.

two types of shovels: bayonet and shovel;
building level;
electric jigsaw or ordinary hacksaw.

In addition to the tire, with the diameter of which we have already decided, we will need:

PVC film or special covering material for pools, which is sold in specialized stores;
sand;
gravel;
large stones for decorating the banks of the pond;
plants for decorating a pond and framing.

If everything you need is prepared, you can get to work.

Stage # 2 - preparing the tire for work

Despite the fact that we are going to bury the tire, at the first stage of work it must be cleaned of dirt. But her training doesn't end there. We need to cut off its upper part.

unlikely for this purpose. normal fit knife. We recommend using a low speed jigsaw. You can also use a hacksaw for metal, but then this operation will have to spend more time and effort.

Stage # 3 - digging a recess for the reservoir

Before you make a recess, you need to level the site. Now we need to decide how much we want to deepen the rubber base of the future structure.

She may be:

immersed in the soil for the entire width of its tread;
deepened by one third;
remain on the surface of the prepared site.

Based on the decision made, we dig a hole. Its shape should correspond to the outer diameter of the tire, but with small allowances around its entire circumference. You should not completely deepen the rubber base into the pit: if you leave the rubber edge on the surface, rainwater will not flood the container.

Before installing the tire in the resulting recess, it is necessary to level the bottom and fill it with sand by about 15 cm. The sand should be soft and without pebbles. In this case, he will be able to protect the gasket placed on the bottom of the reservoir from damage, and water leaks can be avoided.

When forming a recess for a tire, you need to compact the sand well at the site of the future bottom of the mini-pond and check the level of the quality of the work performed

We check the quality of the work performed. Do not forget to tamp the bottom and only after that place the rubber base on it. After that, you should use the level again to check the horizontal position of the tire.

Stage # 4 - waterproofing device

For the arrangement of waterproofing, it is better to use a dense covering material, which is specially designed to protect the bottom of the pools. You can buy it in specialized stores for pools. Sometimes it can be found among the goods for the garden. The material must be taken in such a way that it protrudes from the tire walls by about half a meter.

Yes, we prefer a special waterproofing material over conventional polyethylene. Someone may argue that because of this, our structure becomes less like a homemade product, for the creation of which, as a rule, improvised materials are used. But it is better to make a design that will serve you for more than one year without replacing the bottom. After all, even very thick polyethylene will not be able to withstand the load and will definitely leak.

However, each owner decides for himself which material is best for him to use. When choosing ordinary polyethylene, consider replacing it when you begin to strengthen the walls of the future pond. The building may need to be demolished.

Even if you fold the plastic film in half, it will leak. To replace it, the mini-pond will have to be dismantled, so the top of the structure will have to be made collapsible

So, the covering material is freely distributed along the bottom of the pit, and its edges are brought out half a meter beyond the edges of the tire placed in the recess.

The membrane of the material must be rationally distributed inside the tire. For this purpose, the future country mini-pond is filled with water, which will put pressure on the bottom and walls of the structure. Under its pressure, the reservoir will take its shape.

Take the time for quality work and you will get an excellent result that you can be proud of for several years

Now the covering material must be carefully straightened. To fix the coating in the desired position, you can press it down with rounded boulders laid on the bottom from opposite sides.

Stage # 5 - form the walls and decorate the pond

We smooth the edges of the material and sprinkle them with sand and gravel. This will permanently fix the membrane. Now she won't slip. Sand will serve as the basis for further decoration of the pond.

Further strengthening and decoration of the reservoir completely depends on the imagination of its author. On initial stage you can just overlay the pond with stones.

If you manage to find a large tire, you can make a mini-pond not only for kids, but also for adult family members.

Options for placing stones depend on the degree of functionality of the structure:

For swimming. If the tire was large, then such a structure can even be used for swimming. The banks of such a pond should not be overloaded with stones. With their help, it is enough to form a platform around the walls. A large number of stones can lead to injury to bathers.
For decorative purposes. If the reservoir is needed only to create a beautiful image, you can fantasize with the location of the stones in order to emphasize their beauty as advantageously as possible. In this case, do not be afraid to show their sharp edges. They look spectacular.

Stones can be laid out in several rows, placing rounded and large boulders below, and smaller pebbles on top. Even the bottom of a mini-pond can be decorated with cute, medium-sized oval-shaped pebbles taken from a river or brought from the sea. But it is better not to use sand and gravel to decorate the bottom, because the water from them can become cloudy.

Do not overload the mini-pond decorative elements. He is so handsome. Even in a minimalist style, it remains a magnificent place that attracts the eye.

In any garden, regardless of the will of its owners, many small animals live. It can be, for example, moles, hedgehogs or mice. If you do not want to find the corpse of an unfortunate hedgehog in the water one morning, place a picturesque snag in the pond. She will not only do appearance structures natural, but also help the animal avoid death.

To visualize the whole process of work, watch the video:

Other ideas for arranging such a pond

If you think that a pond from a single tire is all that the fantasy of domestic craftsmen gardeners could give rise to, then you are deeply mistaken. There are a lot of options for using tires to create reservoirs. And we will tell you about the most popular of them now.

If you take not one, but two tires of equal or even different sizes, you can make not one, but two reservoirs that will be in contact with each other with treads. The most interesting thing about this building will be its decoration. For example, at the junction of two rubber bases, you can build a beam bridge from birch logs. It can be both decorative and a continuation of the garden path.

By changing the degree of penetration of tires, you can create ponds with overflow. To do this, one tire is fixed on the surface of the site, and the other is buried. With the help of such an overflow, by the way, it is possible to organize the drainage of rainwater flowing from the roof.

On the basis of ponds with overflow, you can make a homemade waterfall. To do this, you need to lead a hose to the upper tank, from which water is supplied under low pressure. It can be carefully camouflaged with stones located along the banks. Water, overflowing the upper part of the structure, will effectively run into its lower half, imitating a waterfall.

If the landscape of your site allows, then why not build such a magnificent waterfall, which is based on the same tires

The swimming pool in summer is something that cannot leave any child indifferent. A large tire will make it easy and simple to make it. Kids will have something to splash around in under the supervision of adults. It is best to surround a children's paddling pool with a coastal zone of tiles so that you can safely step on it with bare feet. To protect the children, the water in such a pool must be filtered. A pump can be used for this purpose. Or you can just change the water more often.

A good idea to enliven a pond is to use a fountain in it. To do this, you can adapt a turbine with a nozzle for an aquarium or a small pump. For the fountain to work, it needs to provide power. Do not forget to protect yourself: the electrical wire must be insulated with a corrugated pipe and buried.

See what the construction of a tire fountain looks like:

Even if there is no meth for a pond in the garden, using a tire, it can be done on a balcony, on a terrace or in a loggia. To give the design an attractive look will help artificial stones, which can be glued with a water-based compound to the side surface of the tire.

Of course, this list of ideas cannot be exhausted, because human imagination knows no bounds. Watch this video - we're not fooling you:

Many assume that the construction of a country pool - expensive pleasure, and to make it, you need to spend a lot of time and effort, but this is not always the case. Old tires that have served their time, which are lying around unnecessarily, can serve as an excellent material for creating a reservoir on suburban area. It is not difficult to equip a small, pretty pool from a wheel with your own hands, it will take a minimum of funds and very little time.

Which wheels are suitable for the pond

The choice of tire depends on the size of the pool you intend to build on the site. If you want to make a decorative pond to decorate your country landscape, tires from cars. But if you decide to make a pool out of a wheel with your own hands in the country, where you can swim, you need to use tires from large trucks, special equipment or a tractor.

For this, rubber from the L-700 or T-150 tractor is suitable, you can use the rear wheels of the Belarus tractor. Even better, if you manage to get a tire from a Belaz dump truck. Its size allows you to equip a pool in which two adults can swim at the same time.

Stages of pool construction

Choose an open area for the pond away from trees. So that over time the base does not blur and crack, it is advisable not to place it in the irrigation zone, but to choose a dry place.

How to prepare a wheel

Clean the tire of all kinds of dirt. To make a pool from a wheel in the country, you will need one side part, and the second will need to be cut off, leaving only the side. Use a sharp knife, and to make it easier to cut, pre-spread the rubber liberally with ordinary laundry soap. In places where you need to cut the cord, use a hacksaw.

You should not use a grinder to trim unnecessary parts of the tire, it turns the rubber into sticky small crumbs, which will then be very difficult to wash off.

How to make a base

Before deciding how to make a pool out of a wheel, decide how you want to see your future reservoir: so that it completely rises above the ground, or that its body is partially dug into the ground. If the first option is chosen, it is necessary to remove a layer of earth with a diameter slightly larger than a tire for one bayonet of a shovel, fill it with sand and compact it well.

In the second option, you need to dig a hole 2/3 of the wheel height deep, make a pillow of sand or gravel with a layer of about 15 cm, and level the surface. Next, the base under the reservoir must be concreted and a tire installed on it. After that, 2 more buckets of cement must be poured into the center and leveled so that there are no cracks or cracks left inside the structure. The pool will be completely ready in three days.

Drain hole equipment

In order for the water in the reservoir to be always clean and fresh, it must be changed periodically. The design turns out to be quite high, so manually draining water from it is inconvenient and difficult.

To automate the process, it is recommended to make a drain system in the lower side of the wheel. To do this, you need to prepare a small hole at the bottom of the tire, insert a pipe with a tap into it and fix it with a lock nut and washer. How to make a do-it-yourself pool drain system from a wheel can be seen in the photo.

How to improve the pond outside

Possible options decoration - paint outer part tires with multi-colored paints or lay out a wall around it from natural stones. The base around the structure can be overlaid paving slabs, plant flower beds, sow lawn grass and break up the lawn.

As you can see, you can make a pond with your own hands almost for free. One has only to apply a little ingenuity and imagination - and your country house will have a great place for swimming, which is a great alternative to expensive stationary structures.

The lack of water in a summer cottage can not only spoil good mood but also wreak havoc on all your plants. In order to avoid this, there are special plastic ones in which you can store large amounts of liquid. But not always hosts country houses have the opportunity to buy an expensive one for the dacha. In this article, we will show you how you can create a great container for free.

Old tires as an alternative to expensive containers

If you are thinking about purchasing plastic container for water in the country in a specialized store, consider whether there are old tractor tires on your site. It is from them that you can create an excellent water tank almost for free. To do this, you do not need complex technical tools and certain skills.

Where to find them if not in the country?

Large tractor tires can be found at the nearest tire shop or station Maintenance. The ideal option is an old diesel tire. If there is none, you can take truck tires. In any case, the cost of transporting them will be a hundred times cheaper than buying a plastic water container.

Application

It should be noted that such budget tanks are not suitable as a container for drinking water. This is their main drawback. Most often, tractor tires are found in villages where the owners have their own geese, pigs or chickens. For them, just such water is suitable. Useful for plants too. In addition, such a rubber tank can accumulate water itself (in this case it will be rain). Unlike tap water, it does not contain chlorine. Therefore, it has a positive effect on the growth and development of plants. And if you have a large tire (with a diameter of 2 meters), it can be fully used as a mini-pool. Plastic containers for water in the country do not perform such a function.

Advantages

The main material of which the tire consists is rubber. Such material is versatile as a water storage tank. Its main advantages are strength, environmental friendliness and durability. Rubber does not let water through at all, besides, it does not rot, respectively, it will serve you for many years. Such a tire is very difficult to puncture, while plastic is very vulnerable to mechanical damage, and especially cuts. No one will steal such a tank for sure. It has no value, but it performs the same function as expensive plastic water containers in the country.

How to install a tractor tire?

First you need to level the place where the tire will lie. Then you need to start preparing the tire - cut out its upper part with a sharp knife. So that the water does not “run away”, fill the bottom of the tire with broken bricks, or better, completely concrete (for this you will need about 30 kilograms of sand and 10 kilograms of cement). Wait until everything is dry. Everything, you can begin to fill it and use it. A tractor tire is a great alternative to a plastic water tank in the country!