Step by step instructions: how to make an easy chair with your own hands. Do-it-yourself armchair made of wood Assembling a do-it-yourself marrakesh lounge chair

The armchair is good place both for work and leisure. Before you make a chair with your own hands, you need to familiarize yourself with its models, since there are a large number of chairs. For some models of chairs, willow or rattan is needed, as when presented in other materials, they lose their charm. This piece of furniture can also be made of metal - forged rocking chairs look like jewelry in the interior.

Chair drawing.

DIY chair - wooden chair

Solid wood furniture is a symbol of solidity and reliability, even if it is a lattice model. It does not take much time to make a chair from a bar, and it can serve for many years without needing restoration. For manufacturing you will need:

medium thickness timber;
plywood;
wood glue;
primer;
stain;
furniture dowel;
self-tapping screws;
sandpaper 3 types;
Bulgarian;
screwdriver;
hand drill;
plane;
clamps;
sponge or foam rubber;
brushes;
pencil or marker;
square;
dye.

Chair making tools.

The thickness of the beam does not matter much, but when buying, you need to pay attention to a single section, which simplifies work and shows the quality of the workpieces.

Ideally, all blanks should be of the same thickness and with good linearity.

If one of the parts is twisted, this will greatly affect the integrity of the product, it may warp or crack during operation.

How to make a chair - manufacturing process

The beam is sawn into the required number of transverse slats and bearing additional seat crossbars. Good and fast work allows the presence of a circular saw. The edges of the resulting bars are marked, and drilled at the same distance through holes. The distance from these future fasteners to the edge of the bar must be at least 25 mm, otherwise the hand-made chair will not be strong enough. A drilling stand will help you accurately maintain all the parameters for a variety of holes, on which you can set parameters such as the perpendicular of the holes, their dimensions and distance.

Before making a chair, one more safety concern is required - to process the ends and surface of the slats in order to exclude the appearance of splinters during operation.

In this case, all existing ribs are rounded with a grinder or planer. When the longitudinal slats are ready, the remnants of the beam are divided with a circular saw into squares, which will be used to separate the slats from each other in the structure.

Scheme of assembly of a garden chair.

Holes are also drilled in them, coinciding with those already on the finished bars, they need to be sanded and the ribs smoothed. Each master will determine the number of long bars and squares for himself, starting from the size of the chair and the thickness of the bar.

Dowel fasteners are inserted into the holes, a few drops of glue are added, after which each bar on both sides is connected to a pair of cubes. The blanks are aligned along the edges by attaching a rail, then left to dry, tightened with clamps. After drying, the wood is treated with stain. A rope can be threaded through the holes in the parts and the painted parts can be hung to dry. In the same way, varnishing occurs.

To make a chair with your own hands, the back and seat for the chair are cut out of plywood. They are twisted together using a pair of screws on the right and left. Additional strength can be given by dowels if holes are drilled under them and glued before use. All parts are painted in the desired color and varnished after drying. It remains only to make the final assembly of the body with the help of bushings and screw the seat. This unusually shaped bright and catchy armchair complements the interior well.

Do-it-yourself garden easy chair

Not everyone likes plastic chairs, which are currently used everywhere for decoration in the country house or in the garden of the recreation area. Garden light chairs made of wood look more appropriate on the site, and their manufacture does not take much time. Before you make a chair, you need to consider that its design should be light and comfortable, it is best to prefer a folding chair. This will allow you to quickly transfer furniture under the roof in case of rain, because even well-treated wood should not be exposed to moisture.

Scheme of connecting the legs of the chair.

Wood, in order to make a chair, you need to choose from hardwoods such as beech, walnut or oak. Pine, cedar, larch or aspen are also little susceptible to decay, but at the same time, pine is not resistant to mechanical stress, large dents remain on the surface. Boards should be chosen well dried or dried under a canopy before starting work. Materials and tools will need the following:

Circular Saw;
milling cutter;
hacksaw;
plane;
screwdriver;
drill;
clamps;
grinder;
roulette;
square;
pencil;
sandpaper;
screws or screws;
wood glue;
drying oil or furniture varnish;
stain.

Preparing and assembling parts

A garden chair will require two rear and two front legs, with the rear legs being longer. You need to cut out 2 supports for the armrests, a backrest and a jumper. For the rear pair of legs, armrests, backrest and seat, boards matched in color and texture are glued together until the desired width is obtained. To qualitatively glue the tree, grooves for the dowels are chosen at the ends. Paired parts can be sawn out at the same time by pulling two boards with clamps.

Rocking chair drawing.

Details are then adjusted to size using a milling cutter or planer. When cutting the back, the glue line, if present, should be placed in the middle of the part. The upper edge is rounded, and after that you can start assembling the garden chair, adjusting other elements as needed.

The rear legs are attached to the backrest with screws reinforced with glue. To ensure that the workpieces do not crack during assembly, the holes for the fasteners can be drilled in advance. The strength of the assembled seat will depend on the correct location of the boards on it. They should lie in the direction from one leg to another. The front legs are also screwed onto screws or self-tapping screws reinforced with glue.

Reliability and stability of the chair is given by a proleg - a jumper located between the front legs. Fasten it similarly to everything else, using glue and screws. Then the armrests and the support for them passing behind the back of the chair are attached.

The heads of all screws used for fastening should be sunk flush with the surface, and then closed with special plugs. The wood of the finished chair is impregnated with hot drying oil or stain, dried, varnished in several layers. You can opt for a special furniture varnish, but parquet or yacht varieties have the strongest coating.

Design for rocking chair

This chair can be used both in the garden and at home. By expanding the seat, it is possible to make not an armchair, but a whole bench on which several people can fit. For manufacturing you will need:

Chair seat assembly diagram.

electric jigsaw;
grinder;
drills for wood of different diameters;
screwdriver;
square;
roulette;
pencil;
plywood;
self-tapping screws;
confirmations;
slats.

If the rocking chair is made by hand from start to finish, it is better to use high-quality materials so as not to spoil the work.

Making a rocking chair

The sides of the chair with a rounded bottom are cut out according to the developed pattern in the first place. They should be completely identical, and there should be no protruding corners on their lower part. Then a beam for the seat and back is cut, the number and length of which must be calculated separately for each model. The surface of each bar is sanded and polished, the corners are smoothed. If you plan to use the chair on the street, the ends of the boards should be given special attention. They are varnished at least 3 times, since it is there that the wood is especially loose and needs protection from atmospheric influences. To protect outdoor and garden furniture from destruction, the ends are impregnated several times with hot drying oil, and the fibers are flattened with a hammer.

The sidewalls are pulled together to the desired size by several drawers, drilling through the sidewalls. Then holes are drilled in the ends for fastening the bars. The bars themselves are also drilled in advance to avoid cracks during operation. It is more convenient to fasten the bars not between the sidewalls, but on top, somewhat going beyond the contour. In such a rocking chair there is more space, and it looks neater. Each screw should then be covered with an antiseptic and a plug placed on top. After that, the product is finished with waterproof types of varnishes, with drying of each layer for at least 12 hours. At least 3 layers are put, smeared with a thick layer, trying not to leave gaps. Only after this, the rocking chair can be considered finished.

Not only craftsmen know how to make exclusive comfortable furniture from improvised materials. The advantage of such an occupation is obvious - it is the possibility of translating into reality the most daring ideas for the diversity of living space. An additional bonus is the low cost of making homemade soft chairs with your own hands. Following the advice of designers, you can make an easy chair for a pleasant pastime in own house. At home, you can exactly repeat all the stages of factory production of this modern and convenient attribute for decorating a nursery or living room. On the Internet, you can find both the simplest and most complex schemes.

The first step in the manufacture of home upholstered furniture is the choice of fabric for the external design of the soft parts of the structure. Each master selects upholstery depending on physical properties and price aspects and features that different drawings have. Consider the most common fabrics for decorating chairs in our time:

velor - velvety to the touch, gives the furniture a certain charm;

Velor upholstered

flog - a distant analogue of velor, easy to clean, so designers use it to decorate children's upholstered furniture;

Flog in upholstery

chenille - a fabric based on a combination of natural and synthetic fibers, has a special wear resistance (a well-thought-out structure prevents the formation of pellets);

Chinille in upholstery

jacquard - the upholstery is considered durable, but over time, the loops turn into puffs;
natural tapestry - the most expensive and beautiful view upholstery fabrics;

Jacquard in upholstery

artificial suede - a universal option for armchairs in a sunny room, resistant to UV rays and easy to clean;

Upholstered faux suede

leatherette is a durable material that allows you to play with decorative embossing.

Leatherette in upholstery

Material, fittings, tools for frame attribute

Creating a frame chair from scratch presents some difficulties. But the finished product will have a more respectable appearance. You can verify this by looking at the photos of finished products by home craftsmen. You can also use the old Soviet "grandmother's" chair for the base.

To make a simple frame for a soft chair, you need to pick up strong sheets of 20 mm plywood for cutting out parts with your own hands. Also useful is a standard repair tool kit with an electric drill, jigsaw, steel ruler, emery cloth, metal rims, masking tape, pencil, tape measure, thin nails, self-tapping screws, wood glue, stain, glossy paint. For upholstery you need: artificial leather or fabric, foam rubber (filler).

Step-by-step creation of upholstered furniture with a wooden base

If you do not know how to make a drawing for the base, then look for ready-made schemes on the net. As a rule, they are transferred to a cardboard template with a pencil. Only after that proceed to perform the operations of the described algorithm. This will help save on excess material, or vice versa - do not buy the missing parts.
According to the cardboard template, future constituent elements are cut out of plywood sheets:

banana-shaped sidewalls;
cross bars.

It is important to determine the desired angles of inclination, bending and dimensions of the future frame. This will help the photo of the finished chair, created according to your scheme.

The next step is surface treatment. wooden parts cleaning and polishing. With special care, the ends are worked out to improve the quality of the work done. Previously, these parts are impregnated with heated drying oil and only then bends are formed with a hammer, if they are provided for in the sketch. Each component is cut with an electric jigsaw.
Stained or treated with varnish-stained sidewalls. The ends of the side parts are reinforced with metal rims.
The next course of action is connected with the close-fitting of the frame. Using an electric drill, make the necessary holes. The rims are fixed with screws.
First, the back of the back is covered with artificial leather or fabric, then the remaining fragments of the structure, incl. and seats.
The upholstery is fixed with wallpaper nails, which are characterized by large hats. In the back of the frame chair, the upholstery is fixed along the edge, along the transverse parts to better cover the slats.

Pattern of a round chair wooden frame We sheathe the frame with fiberboard cardboard

Experienced furniture makers advise the attachment points to be additionally treated with wood glue. Such a move is needed to increase the durability of the created furniture with your own hands.

Secrets of reliable upholstery: how to sew

The process of stretching the upholstery of soft chairs has its own nuances:

Foam rubber is cut to the size of the seat (average thickness - 5 cm). The part is glued to the surface of the plywood sheet.
Horizontal and vertical fabric straps are fixed to the back with a construction stapler. Similar belts are added to the armrests and sidewalls from the inside along the form.
From a piece of foam rubber 0.1 cm thick, a part is cut off, which will be larger in size than the area of the seat (difference by 4-5 cm). They take a flap of synthetic winterizer fabric of the same size with an elongated front part and fix it with their own hands.
After the done manipulations, the upholstery is covered with furniture fabric. With the help of a stapler, textiles are fixed in all corners of the cover, the synthetic winterizer-foam layer to the seat frame of the chair.
The sidewalls and armrests are also covered with synthetic winterizer, fixed with aerosol glue over the entire surface. Only after that, the parts are sheathed with a cloth, securing the flap along the staples.

We sheathe the chair with foam rubber. In addition, we put a synthetic winterizer

Upholstered furniture is relevant at all times. It is found in city apartments, private houses, dachas, and even in household plots during the warm season.

Soft is an important attribute of any living room, nursery or bedroom. They are provided by different manufacturers in a wide range. But in order to save your own savings and acquire original and exclusive furniture, you can try to make it yourself.

An upholstered chair made of foam rubber is of two types:

Material

In this article we will talk about an easy chair made of foam rubber. Therefore, we will consider the features of the filler. The main advantages of using foam rubber as a filler include:

When choosing foam rubber, attention is drawn to:

material stiffness;
density;
orthopedic properties.

As upholstery material suitable:

Dimensional drawing

Before proceeding with the manufacture of the chair, it is necessary to make a preliminary drawing with all dimensions, materials of manufacture and systems for attaching individual elements.

An adult product with a frame will have the following dimensions:

width - 75 cm;
height - 90-95 cm;
seat height 45 cm from the floor;
for the manufacture of legs, a beam with a square section of 55 cm is selected;
side rails - 40 cm;
armrest height - 20 - 30 cm.

In the manufacture of a frameless chair, a detailed pattern of the future product is made. It will consist of:

6 wedge-shaped parts;
round bottom;
tops.

A standard bean bag chair for an adult will have the following dimensions:

height - 1 - 1.2 meters;
diameter - 1 meter;
the diameter of the lower bottom is 30 cm, the upper one is 15 cm.

As for children's models, their sizes will be as follows:

height - 60 cm;
lower bottom diameter - 25 cm;
top diameter - 11 cm.

How to do with a frame?

The traditional padded product with a frame is the more common option. For its manufacture, you will need to prepare materials, tools and experience in carpentry.

Attention: in frame upholstered furniture, only the legs of the product will be visible, the rest of the parts will be covered with foam rubber and upholstery.

Tools

Of the tools you will need:

Of the materials needed:

lumber (most often consumers prefer 20 mm plywood);
screws;
thin nails;
foam and upholstery;
wood glue;
stain;
gloss paint.

Manufacturing

The process of making a classic version of an upholstered chair is quite simple:

As for the finishing, this is the processing of the product with stain and paints and varnishes. This will not only give the furniture an attractive appearance, but also extend its life. Since paint or varnish will reliably protect the product from increased moisture and other negative factors.

Advice: as for decorating an easy chair, it can be supplemented with small pillows.

Frameless option

The second option for making an easy chair made of foam rubber is the simplest model of a bean bag chair.

Tools

Of the tools required:

Of the materials required:

fabric (for the manufacture of inner and outer covers);
filler (foam rubber);
two zippers, one - 40 cm long, the second - 1 meter.

How to make?

The manufacturing process of a soft frameless chair is as follows:

That's the whole simple process of making a frameless bag chair. As a decoration on the product, you can sew an appliqué from a well-chosen fabric..

Photo

As a result, you will have a comfortable and stylish element decor:

Useful video

You can see the manufacturing process in detail in the following video:

Conclusion

In conclusion, it is worth noting that making an easy chair with your own hands is quite easy. If you know the basics of carpentry, it is worth building a wireframe model. If you are good at sewing, do frameless chair. Both options have their advantages. They harmoniously fit into any interiors and please owners with comfort in operation, attractive appearance and high technical characteristics.

In contact with

At home, you want to relax in a comfortable environment, feeling the comfort around you. The required attribute to create it is cushioned furniture. Sofas and armchairs not always presented in stores are satisfied in terms of design or quality, not to mention current prices. Alternatively, you can make a chair with your own hands, which is guaranteed to meet all individual preferences. Dimensions, upholstery tone and level of softness - everything can be chosen to your liking, resulting in a designer piece of furniture.

Before starting work on assembling a chair at home, it is necessary to determine the main parameters of the future product. You should start with the appearance. In accordance with the style of the room where the upholstered furniture will be installed, a suitable model is selected.

It is advisable to study the range finished products in exhibition pavilions or look at photos in catalogs. In the first case, you can clearly see and touch the planned model, but it will take some time to search. In the second case, the time costs will be minimal, but the final appearance may differ significantly from the desired one.

Having studied the range of chairs and decided on the model, you can proceed to preparatory work. To begin with, it is worth measuring the place where it is planned to put the furniture, and calculate the dimensions. In order to avoid mistakes in fitting parts and not to forget anything, competent drawings and diagrams are drawn up.

The generally accepted ergonomic height of the seat is approximately 45 cm, its width and depth vary from 40 to 45 cm. The height of the back from the floor should be about 1 meter. For the convenience of sitting, a slope of 3 cm is made from the edge to the back.

To make a drawing of a chair on a sheet of millimeter or checkered paper, a fully finished model is initially drawn, after which it is separately depicted:

back;
side detail;
seat;
armrests.

In schematic modeling, it is necessary to take into account the thickness of the material from which the chair will be made. Synthetic and natural fabrics have different parameters, which can affect the final collection of parts. After completing the drawing, it is advisable to draw part templates on cardboard and cut them out. This will make it possible to try on life-size dimensions and project the necessary elements on the material.

Before purchasing, a full calculation of the amount of required materials is necessarily carried out. This is done in order to exclude a repeated trip to the store and the purchase of unnecessary parts.

For components, you can go to the construction market or to a specialized store. You can also order materials with delivery, but in this case it will not be possible to visually assess their appearance and quality.

Materials and tools

The frame is an important part of any piece of furniture. To properly make a chair, you should decide in advance on the material. Most commonly used:

tree;
Chipboard, chipboard;
plywood;
metal.

Wooden frames are the most environmentally friendly, do not cause allergies. An armchair made of boards will last a long time if the wood good quality and chosen correctly. Do not take lumber with the presence of bark, cracks, and also having fuzzy geometry - all this will lead to cracking and deformation of the finished product.

A homemade chair with a chipboard frame is durable if the material is of sufficient density, thickness, dry and does not crumble. Unlike wood, synthetic material cannot be painted, the surface cannot be given the desired texture and tone.

Plywood is also used to make the frame of a home chair. Due to the low attractiveness of the texture of the material, it is covered with soft upholstery. With proper fastening, plywood thickness of 15 mm and above, the part can be used for a long time.

On the market building materials laminated plywood appeared, which has an attractive appearance. It can be used for the exposed parts of the chair without losing the visual effect.

A do-it-yourself chair frame assembled from metal will be the most durable, but its weight will significantly exceed other options. The disadvantage is that it can only be done with specialized welding tools. You can fasten metal parts with nuts and bolts, but over time, such a frame will begin to loosen and rattle.

Regardless of what material the frame for the chair will be made of with your own hands, it is this part that is the main one and must be assembled with high quality and durable.

solid wood

A thick upholstery fabric is prepared for upholstery. The most common options:

chenille;
tapestry;
jacquard;
velours;
flock;
synthetic or genuine leather.

The choice of material is made taking into account future operating conditions. So, if there are pets or children who, due to age, can damage or stain the fabric, it is better to give preference to easy-care, wear-resistant materials. Parts should be cut with seam allowances, so the material should be purchased with a small margin.

Soft elements are filled with furniture foam with a density of 30 or more. You can make upholstery from improvised materials, for example, use old blankets or pillows instead of foam rubber.

To make a chair with your own hands you will need:

screwdriver or welding machine;
a jigsaw with the necessary nozzles or a grinder saw;
furniture stapler;
sewing machine;
scissors;
crayon or piece of dry soap;
Sander;
hardware for fixing parts.

All tools, as well as accessories, must be prepared before the installation process begins, so as not to waste time searching for the necessary elements.

Tools

Manufacturing steps based on the model

The process of making a chair with your own hands directly depends on the chosen model. Homemade products may not even be inferior in comfort and appearance factory counterparts.

Traditional

Traditional chair - great design solution to create a comfortable environment in the house. Unlike sofas, armchairs take up much less space, and making them with your own hands from wood, chipboard or metal is faster and easier.

After preparing the tools, a place for assembly is selected. It is advisable that no one move the laid out materials. It is important to provide side effects from the manufacturing process and their consequences for others. When cutting wood with a jigsaw, sawdust should not get on furniture and interior items, and when using inverter welding, you must adhere to the requirements fire safety. When all the preparations are completed, you can proceed to the beginning of the installation.

Stages of work:

using cardboard templates, transfer the layout of the parts to the frame materials;
with a jigsaw or grinder, cut the elements along the lines of the drawing;
open parts from the bars, if necessary, process with a grinder;
fasten the frame parts with a screwdriver or using a welding machine;
draw an upholstery pattern on the furniture fabric, cut it out with 1 cm seam allowances, sew the details;
cut and cut furniture foam rubber, fill upholstery;
the armrests are wrapped with foam rubber and fixed with a special stapler. Decorative wooden armrests, if necessary, are fixed from above with a screwdriver and self-tapping screws.

If the wooden chair will stand in a room with high humidity, after assembling the frame, it should be treated with bioprotective agents.

After finishing the installation work, you can decorate the chair to your liking. Small buttons are fitted with furniture fabric, which are sewn onto the product in a checkerboard pattern. By applying paint different colors and sanding wooden elements are decorated semi-antique with their own hands.

Folding

Folding chair - lovely way organizing a place to stay. Such a piece of furniture made for use on garden plots, indispensable in the summer. A DIY garden chair will do its job. functional purpose fully and will not yield to factory counterparts. The possibilities of using a folding piece of furniture allow you to use it in the most unexpected situations: overnight guests, moving, relaxing on the veranda. The wooden chair is made in the most various styles. Having chosen a design, having completed the drawing, you can begin assembly work:

cut the prepared materials with a jigsaw or grinder to the desired size;
treat the surface with a grinder to make it smooth, otherwise it is possible to separate sharp traumatic particles;
treat with bioprotective agents and dry well;
paint all the details in the desired color;
assemble the chair frame with a screwdriver, self-tapping screws and the necessary fasteners.

Armchairs made of wood are decorated with almost any style. Lacquers, paints and patinating enamels are used for processing.

The finished chair is definitely worth checking for strength. With the correct implementation of all points folding chair from a bar will last a long time.

From a pallet

Construction pallets are assembled from flat boards that have dried up and will not change their geometry. However, their use as a material for self-manufacturing chairs are widespread. From pallets, original loft-style models are obtained, which almost do not differ from design options. Manufacturing includes several stages:

After selecting the model and preparing with grinder boards are peeling. Without this process, delamination of wood is possible.
Using a jigsaw or grinder, the pallets are cut in half, the edges are sanded and painted over.
From the elements you need to assemble a frame chair from boards desired shape, then fix the elements with self-tapping screws and a screwdriver.

Such a chair for giving, made by oneself, looks no worse than store counterparts. For comfortable use of pallet seats, it is necessary to sew pillows on them. The fabric is selected based on the operating conditions of the furniture. As a filler, you can use foam rubber, holofiber, synthetic winterizer, polystyrene foam balls.

The summer cottage serves not only for growing vegetables and fruits, but also for a good outdoor recreation. This is best done in a luxurious and reliable armchair made by yourself. We will talk about how to make it, what materials, tools and knowledge will be needed below in the article.

If you like to tinker with wooden crafts, it will not suit you to install standard plastic chairs on your own site. They not only do not fit into the natural atmosphere of the kingdom of plants and flowers, but also unreliable.

In addition, their design is not always conducive to good rest. Therefore, in this case, we offer you a simple model of a wooden garden chair that will organically fit into the landscape. suburban area. You do not need special skills, as in forging or welding metal products, although knowledge of carpentry is desirable.

Requirements for country wooden furniture

Special conditions of use require that the design meet certain parameters. Then it will last long enough in the original version.

Let's consider them in more detail:

Immediately count on the fact that the chair needs to be made transportable, then in case of bad weather you can quickly hide it under. Of course, special antiseptics and paints used to protect wood will allow the structure to withstand atmospheric influences, but we advise you not to test it in such cases.
Choose for garden furniture hardwood, among which are oak, beech and walnut. Although the price of such materials is higher, the quality of the construction will be excellent. Aspen, larch, cedar and pine are also little susceptible to decay, but the disadvantage of the latter is sensitivity to impact. Even a small one is enough for a dent to appear on the chair, which then will not be easy to remove.

Particular attention should be paid to the protection of the material from atmospheric influences.. This is due to the fact that it can be under the influence for a long time. sun rays, often gets caught in heavy rain, so you need to protect it from such tests.
Preparation for protection begins at the stage of harvesting wood for the manufacture of furniture. Fold the boards under a canopy in a pile, press it heavy on top and leave to dry, it’s very good if you could buy dry and high-quality lumber right away.
In the process of work, the blanks must be sanded, impregnated with an antiseptic, and then with hot drying oil. At the next stage, dry them, and varnish them for outdoor use.

The relief of the texture and the decorative cut of the tree will depend on the number of undeveloped branches and knots, i.e. the more, the better. Such a polished surface may resemble strolling grape snails.

Tip: when collecting wooden chair for summer cottages, fasteners should be embedded in the material, then you will avoid puffs on clothes and scratches.

How to prepare for work

First of all, it is necessary to pre-assemble all the tools that you may need, as well as the material. In our case, all the blanks, with the exception of the insert strips, will be cut out of a cedar board, the thickness of which should be at least 20 mm.

Details

Dimensions are in mm:

Legs:

rear - 2 pcs. (20x254x787);
front - 2 pcs., (20x76x533).

Back - 1 pc., (20x279x914).
Armrest:

support - 2 pcs., (20x127x406);
rear support - 1 pc., (20x76x610).

Jumper - 1 pc., (20x51x589).
Insert strips - 2 pcs., (12x20x254).

Material

Dowel (24x60 mm) made of hard wood - 30 pcs.;
Brass screws - 4.5x50 mm and 4.5x32 mm, 20 pcs.;
Sandpaper No. 220;
polyurethane adhesive;
Furniture varnish;
drying oil;
masking tape;
Stencil cardboard.

Tools

Circular Saw;
Plane;
Manual frezer;
Hacksaw for wood;
Screwdriver;
Drill;
A grinder, although you can do without it;
clamps;
Ruler, tape measure, pencil.

Manufacturing process

Preliminary stage - cutting the main elements

Let's start by cutting out the details. To do this, we will prepare a detailed drawing, so it will be easier for us to continue manufacturing the chair.

Prepare the parts that will later become the rear legs and back. To do this, try to carry out all the work based on a detailed drawing with explanations, where there are appropriate tips. After consulting with it, mark and cut the desired blanks.

Cut the back legs, backs, seats and armrests from wide panels.

Get them by gluing boards that you need to match the color and texture of the wood.

Tip: Select the slots for the keys in advance, positioning them so that they are invisible after the cutting is completed.

Cut out the back legs using a cardboard stencil. Attach the template to the blank that will be used as the leg, and circle it with a pencil. Connect and pull together two blanks with masking tape so that you can cut both at the same time.
Carry out cutting with a small margin. To fit parts to size, use a milling cutter or planer.

Cut out the back. To do this, cut the workpiece in such a way that the glue line is exactly in the middle between the boards. Bevel the bottom end of the backrest at a 12.5° angle to match the profile of the rear legs. Round the top edge with a 9mm radius.

Having finished these works, you can start assembling the product, for this you will need to cut and fit other parts in place.

We continue to work

Below are instructions for assembling and cutting the rest of the elements.

Back and rear legs

Drill holes for fasteners in advance so that the workpieces do not crack.
Use screws (50 mm) and glue to fasten the rear legs to the backrest.
Connect the side ends of the backrest to the legs at an angle of 12.5°.
Close the gaps between the parts with insert strips by making them of the appropriate profile. The ends of the slats and the opposite ends of the legs must match, which will indicate the correct position of the back.
Screw the inserts to the back with screws (l = 50 mm).

Tip: keep in mind that the strength of the seat will depend on the location of the boards that should be placed from one leg to another.

Take a circular saw and cut the piece to width.
Mark out sides seats that are angled.
File the workpiece from the sides along the outer marking line. You can not yet clean the raw ends.
Select a groove on the back end of the workpiece, the bottom of which is tilted at an angle of 12.5 °. This must be done because the seat will be at an angle to the back. In this case, the joint will turn out to be dense, which is what we need.
Round the front end of the seat.
Screw the seat to the legs, sand its side edges, fit them flush with the rear leg plate.

Seat

front legs

Cut out the front legs by beveling their top and bottom edges 6˚.
Screw them to the rear using screws (l = 32 mm), reinforcing the connection with glue.
Make a proleg - a jumper between the legs, so that the garden chair gets additional reliability and stability.
You need to cut it to size:

attach the workpiece to the front legs and mark the fixing grooves. In this case, make the bottom of the groove at an angle of 12.5 ° to the plate;
select to a depth of 9 mm from the high side of the groove;
attach the jumper to the front ends of the legs using glue and screws (l = 32 mm).

armrests

Saw out wedge-shaped supports for them, beveling their top edges by 6 °.
Screw the supports to the front legs using glue and screws (l = 32 mm).
Cut out the armrests as well as the back support for them.
Clean the ends of the parts with sandpaper.
Cut the ends of the support at an angle of 30°, the top edge at 31.5°.
Press the rear support piece against the back with clamps.
Replace the armrests and loosen the clamps.
Level the position of the rear support element, achieving a strict horizontal armrests.
Tighten the clamps and screw the rear support to the backrest.
Screw the armrests to the rear support, then to the wedge supports, and then to the front legs, using glue and screws (l = 50 mm).

Close the recessed screw heads with wooden plugs and grind them flush. Take hot drying oil and saturate the wood with it, dry the product and varnish it. You will end up with a comfortable classic design with a beautiful texture that will be appreciated by your family.

Conclusion

A wooden chair for a summer cottage, made independently, will add the necessary flavor. The main thing to remember is that it is necessary to protect the structure from atmospheric influences so that it lasts for a long time. Only familiar tools and materials will be used in the work. The video in this article will help you find Additional information on this topic.