How to paint the table How and with what to paint a wooden table with your own hands - an analysis of the best options. Why does wood need to be painted?

To update the interior and spend redecorating, it is not necessary to buy new expensive furniture - it is enough to repaint the old one. You can keep the familiar design only by refreshing the colors and masking defects and scuffs, or you can completely change the design style by adding color and finishing materials familiar pieces of furniture with a completely new look.

Preliminary preparation

Before proceeding with painting, the surface of old cabinets, chairs and tables must be carefully sanded and cleaned. Old layers of paint will not adhere to the new coating, and very soon the restored furniture will look even worse than before treatment.

The next step is to eliminate defects. Deep cracks and scratches should be puttied, wait until the coating dries, and go over with sandpaper again to remove all irregularities. The third stage of preparation is priming. It is necessary for two reasons: to ensure good adhesion (adhesion of paint to the surface) and to reduce paint consumption (which, without priming, is more absorbed into the substrate).

Even if there is no old paint or varnish on the furniture, it must be cleaned of dirt and dust before starting work. Carelessly carried out preparation will nullify all your efforts, forcing you to repeat the repair procedure in the very near future.

Materials and tools

Best of all, enamels will cope with the task. They form a durable coating that is resistant to external influences. Depending on the selected degree of gloss, the painted surface can be either matte or glossy.

A traditional roller can be used as a tool, but it is well suited for large, flat surfaces - for example, if you need to paint a cabinet, countertop or door. It is very difficult to paint over small details, joints or corners, for such painstaking work it is better to arm yourself with a set of different-sized paint brushes.

Secret 1: Upgraded furniture can be painted much better if it is dismantled in advance, dismantling and unscrewing all the elements as much as possible.

Secret 2: To paint furniture two colors and keep a clear line between them, use painter's paper tape. Make sure that there is not the slightest gap between the paper and the surface, otherwise the drawing will turn out to be smeared, streaks and stains of paint are also possible.

Interior Design Ideas

We bring to your attention a few specific ideas on how to refresh furniture that has lost its former gloss. With the help of TEX products, a small set of tools and a drop of inspiration, you can create an exquisite shubby-chic environment from seemingly useless furniture elements or simply breathe a second life into your favorite items.

1. Gold-plated coat hanger. Clothes hangers are most often hidden from prying eyes: they are located in the depths of the wardrobe under layers of clothes, but every little thing is important in creating a harmonious interior. So, the old wooden hangers look completely unpresentable, but they cope with their function without any complaints, what to do?

It will take: old coat hanger, sandpaper, medium brush, gold-coloured Rust Stop TEX Enamel or TEX Wood & Metal Enamel tinted in any bright color.

Step 1: cleaning. Remove the old coating with sandpaper.

Step 2: painting. Apply Rust Stop Enamel or Wood & Metal Enamel with a brush. Let dry 5-7 hours.

2. Lace wardrobe. It would seem that it could be more banal and ordinary than a simple chest of drawers, but a creative approach can create a real work of art even from the most trivial object. The combination of wood and lace knitting gives the interior airiness and lightness; such a wardrobe will look especially appropriate in the bedroom of a little girl or an adult fashionista.

It will take: an old wardrobe or chest of drawers, a means for cleaning an old coating (scraper, sandpaper or a special solvent), lace fabric or trimmings, a roller and a brush, golden-colored RustStop TEX enamel,.

Step 1: cleaning. Remove the old coating with a scraper, sandpaper or solvent.

Step 3: Painting the backing and gluing the lace. Using a roller and brush, apply to the surface of the cabinet

golden enamel "Rzhavostop" and, without waiting for complete drying, apply trimmings of old lace to the painted surface. Then let it dry for 5 hours.

Step 4: final painting. Directly over the laces, apply a second layer of golden Rust Stop enamel and let dry for 24 hours.

3. . A bright and unusual table will enliven the interior of a children's room and will appeal to inquisitive kids who like everything that is not done according to the rules.

It will take: wooden table, sandpaper, brush, primer "Biotex Eco primer", two colors (we recommend white + any bright color).

Step 1: cleaning. Carefully remove the old coating and dirt from the surfaces.

Step 2: primer. Apply primer to the surface of Biotex ECO and let it dry for several hours.

Step 3: Painting is the first step. Paint the table top with two coats of white Pro Wood and Metal Enamel and let dry for 6-8 hours.

Step 4: painting - the second stage. When the white finish is completely dry, pour a jar of any bright paint onto the countertop so that it can flow freely from the edges. Of course, you first need to take care not to stain the floor and surrounding objects. The drips will harden in a beautiful and neat pattern, and the table will take on a slightly hooligan look.

Do you like your dinner table? It has probably been in use for decades. The table is made of high quality wood, durable, it is a pity to throw it away. That's just the paintwork is cracked, scratches are visible, the color has become dull. What to do? Show your creative skills and start restoration. Today, hand-decorated furniture gives the style of the room a touch of vintage and rustic romance. How to paint wooden table to make it the highlight of the room?

With the help of staining, it is possible to quickly and effectively decorate old furniture. Such a process is easily performed independently at home, while the following is possible:

• choose the desired color scheme;
• perform quality work;
• finished furniture will match the overall style of the room;
• during the operation of the table, you can change or complement the decor.

Therefore, to paint the table with your own hands, you only need to connect your imagination.

What paint to choose?

If coloring is required wooden furniture, then picking up paint will not be difficult. For painting work, any composition is suitable. When choosing, you should take into account only one nuance - it is better to buy paint, depending on the type of wood. Below we consider the most popular types of paints and varnishes.

Water dispersion

Material for painting wooden surfaces located in heated rooms. If in the future you plan to put a table on a terrace or veranda, the paint will begin to swell and peel off, as it will not withstand climatic changes. The composition is non-toxic, during operation no harmful substances will be released that contribute to the development of allergic diseases. The material evenly falls on the prepared wooden surface, dries quickly, and has water-repellent properties.

Such paint allows you to process any surface made of wood, but it is not recommended to clean them with aggressive chemical compounds. During operation, the coating may wear off from mechanical damage.

oily

How to paint the table to give it brightness and shine? Oil paint will achieve this effect. Previously, in order for the coloring to be uniform, it was necessary to apply several layers of material. To date, modern dyes have been released that allow you to achieve the desired result while requiring less consumption.

The only drawback is that oil paints have a sharp, pungent odor that can persist even after the coating has completely dried.

Acrylic

The most practical and versatile paint with an acrylic composition is considered. The tabletop can be painted with a brush or aerosol can. Compared to other formulations, acrylic paint is resistant to changing weather conditions, odorless, easy to apply, dries quickly, affordable, and has a variety of color shades.

Alkyd

If you paint the countertop with alkyd paint, you can say with confidence that the product is one hundred percent protected from moisture. When the composition is applied to the surface, a thin film is formed, which allows you to protect the surface from different kind damage. It would seem that a stronger material cannot be found; a painted object will serve for many years. But, as practice has shown, such paint wears out quickly, so the coating will have to be updated periodically.

Alkyd paint must be applied to dried wood, if the surface is wet, bubbles may form on the coating.

Enamels for wooden surfaces

Enamel can be repainted old table beyond recognition. Paint will give the surface a glossy or matte effect. In this case, the countertop will be protected from mechanical damage, corrosion and thermal effects. Very often this paint is painted kitchen tables or wooden items that will be on the street. In order for the restored item to last as long as possible, it is recommended to cover the surface with a waterproof varnish in 2 layers.

Also, the table can be painted with nitro enamel, it dries quickly (within 15 minutes) and gives the furniture greater strength.

Tools and materials

In order for the restored surface of the wooden table to be painted with high quality, the following materials will be required:

• With its help, you can clean the surface of the old layer of paint.

• Antiseptic for processing wooden furniture. To prevent the appearance of mold, fungi, termites, the surface is treated with a special compound that will help protect objects from destruction.

• Primer white. It will allow you to hide chips, cracks, reduce paint consumption, and also increase its adhesion to the surface.

• Waterproof varnish. Protects paint from water exposure, increases its service life.

• This is a tape with which you can avoid unwanted ink on certain areas of the subject.

• Newspapers or covering film. If the table is to be painted indoors, it is necessary to spread film or newspapers on the floor so as not to stain it.

Also for work you will need:

• rollers and brushes;
• paint tray;
• overalls (gloves, goggles or mask).

If you need to disassemble the wooden table before painting, use a screwdriver.

Surface preparation and painting

If the painting will be carried out completely, better table disassemble. With partial restoration (for example, if you need to process only the countertop in the kitchen), you do not need to perform such actions. Use painter's tape to cover the areas you don't plan to paint.

Let's get to the main work:

1. Treat the entire surface of the table top and legs with sandpaper (you can use a grinder).
2. Prime all defects on the surface. The primer should be chosen to match the paint used.
3. Before you paint the table, cover the floor with paper, newspaper or plastic.
4. If you use a spray can for painting, shake it before spraying. The distance to the object should be about 30-50 cm. The paint from the can must be poured into the tray and the brush or roller should be dipped into it.
5. Now you can proceed, paint the table, trying to distribute the paint evenly. First we cover the countertop, then the legs.
6. After complete drying, apply another layer of material. To do this, you can already use spray paint for a more uniform coloring.
7. When the product is completely dry, go over the sandpaper again to get a slightly rough surface.
8. To fix the paint on the surface of the table, treat it with acrylic varnish.
9. After 10 hours, you can remove the adhesive tape from decorative elements.

On the video: painting furniture with acrylic white varnish.

Table surface decoration

In design art, there are several techniques that allow you to give furniture a special showiness and originality. To create a masterpiece, it is not necessary to purchase expensive materials for decoration, everything you need can be found at home.

Decoupage technique in vintage style

Even an unprepared master will cope with such a technique. For decoration you will need:

• paint for wood;
• primer;
• acrylic lacquer;
• patterned napkins;
• glue for decoupage;
• roller and brush;
• sandpaper.

Work process:

1. Disassemble the table if necessary and sand the parts with sandpaper.
2. Reassemble the table and treat the product with a primer.
3. To achieve a vintage style, it is better to use light-colored paint for the base. For example, paint the countertop in White color. The composition should be applied with a roller in 2 layers.
4. Once dry, lightly rub off the paint with a wire brush or coarse sandpaper. Coat the surface with varnish. Leave to dry for 12 hours.
5. Cut out the necessary patterns from napkins and spread them on a dry table surface. Now you need to wet each picture with water and grease with glue, place it on the countertop and smooth it with a soft brush.
6. When the ornament is completely composed, cover the entire surface with acrylic varnish in two layers.

Decoration with tulle

Use a grinder or sandpaper to grind the surface of the table. old paint or the varnish must be completely removed. Then apply two coats of white acrylic paint to the clean surface. After drying, spread wet tulle on the painted tabletop. Fix it so that it does not fidget during operation.

Now take dark acrylic paint, which should be sprayed through the tulle. Paint evenly. We leave it to dry for several hours, then carefully remove the impromptu stencil and cover the entire surface with acrylic varnish.

How to paint furniture in an original way (1 video)

In any home you can find old wooden table that needs painting or restoration. Do not rush to replace it with a new purchase, because such table can be an interesting design highlight and help express your creative nature.

In this article, you will learn how to paint a wooden table easily and quickly.

What does self-painting give?

• Confidence in the quality of work performed works.
• Possibility to choose the one you want color , staining method.
• Such furniture easier to "fit" into the interior.
• It is easy to bring new ideas to life or simply restore individual parts furniture.

Painting is one of the fastest and most effective techniques in furniture decor.

Choosing a color scheme for an old table

The choice of color is entirely up to the owner. table and his preferences. These can be bright saturated shades, creating the illusion of a wooden texture, painting the tabletop in white or metal color, etc.

• Juicy tones: light green, yellow, scarlet, blue

Such color solutions fit well into modern style where such furniture will become a bright detail of the interior of the room.

• White or black color

This best option for those owners who are pretty tired of the "native" color of the table or countertop and they decided to make it more "neutral".

This solution will suit any interior and will become its concise highlight. With the right color table its wooden texture will be hidden under the uniform a layer of paint.

• metallic

Painting all furniture or its parts in metallic colors is a successful design solution in classical style or high-tech.

Paint selection

For painting an old wooden table you can use almost any paint, but it is worth remembering that it is best to choose the type paints depending on the variety wood.

1. Water dispersion dye.

This is the best option for furniture that stands in heated rooms, and not on a veranda or terrace. It is non-toxic, does not emit harmful substances, fits well on countertop and dries in a short amount of time. Therefore, to carry out such work easily a non-professional can. The paint gives good protection against moisture.

If somewhere it turned out unsuccessfully, then such paint can simply be washed off with cold water.

After the paint has dried becomes strong and resistant to water. Chemical composition is not afraid of light, but is erased from time to time and is easily damaged mechanically. Therefore, the surfaces old the table is not washed with aggressive means. If table should stand outside, it is better to use for countertops alkyd compounds.

Alkyd paints are strong and durable, not affected by water.

1. Oil.

Previously, they were mainly used for dyeing furniture with these paints. But after the manufacturers of paint and varnish products were released more economical in terms of costs paints , which have a less toxic effect, oil ones have faded into the background.

To make the surface of wooden furniture evenly colored, shiny and durable, oil paints are usually used.

1. Enamels for wood.

Quality coating can be created with the help of enamels. They are resistant to light, mechanical stress, not subject to corrosion. In addition, the compositions are varied- Available in both matte and glossy finishes countertops.

Nitro enamels dry quickly, literally in 15 minutes.

The choice of paintwork for countertops must depend on the breed tree, used for making furniture.

Necessary materials

Materials used with whom will be held work by painting the old boards must be of good quality. You need to choose only high-quality materials for painting and priming.

For the entire restoration or staining process, you will need:

• Antiseptic for wood surfaces;
  

  

  A wood preservative is necessary to protect wood from mold and fungi, the so-called blue stain, and harmful insects.

• White primer;

  

  The primer helps better adhesion of the coating to the boards and reduces paint consumption.

• Varnish;
  

  

  Wooden products need protection. For this purpose, varnishes are used.

• To clean off the previous layer of paint solvent, sponge, sandpaper is needed;
  

  

  By doing repair work we inevitably deal with solvents for varnish, enamel, paints.

• masking tape;
  

  

  Masking tape is a tape based on a slightly rough paper layer.

• In order not to stain anything around, during painting we take rags, film, old unnecessary newspapers;
  

  

  Newspapers need to cover the area where you will paint the table.

• If paint not water based, it will be better to make the whole painting process tree did not take place in the living room.
  

  

  It is not the smell itself that is harmful, but the volatile compounds in the paint-solvents. They are toxins for the nervous and hematopoietic systems.

Required Tools

To paint the product you will need:

Step by step painting algorithm

1. Dismantling the table which we will paint and decorate. Carefully unscrew the legs countertop , boxes.
   

   

   When disassembling furniture, do not forget to mark the installation location of each of the parts, so you will not get confused and quickly complete the task.

2. If there are inserts on the surface that are planned to be left unchanged (ceramics, glass), then we simply seal them with masking tape.
3. We wash all the details and boards in warm water, adding a little detergent. Set aside until completely dry.
4. We put on protective equipment so that dust does not get into the eyes and lungs.
5. "Skinning" the old countertop, details and boards fine grit sandpaper. If there are large defects and cracks, prime them with a rubber spatula.
6. "We pass" on the surfaces with a primer. Better if color primer will be similar to the color of the new paints.

   

   This way you can reduce the number of layers applied in the future.

7. We wait until the primer dries, again “skin” it with sandpaper.
8. Do not wash the surface with a rag, but “pass” over it with a dry brush or vacuum cleaner.
9. We cover the floor with newspapers or film, open the windows so as not to breathe paint . Looking around the room for small insects so that nothing gets on the freshly painted surface.
   
10. We put on gloves, clothes for painting.
11. If staining table will come from a can, then shake it. It is recommended to keep it at a distance of 30 centimeters from the surface and apply the layer smoothly so that there are no smudges.

    

    If the surface is covered with ordinary paint, then large areas are painted with wide brushes, and on small parts and the corners should be passed with a thin brush.

12. Give the layer dry and paint the next one. Usually two or three coats are enough for a uniform tone.
13. After the parts have dried, acrylic varnish is applied on top. So, the surface will be resistant to mechanical damage.
14. We remove the adhesive tape from the decorative elements and inserts, we wait 8 hours.
15. After the allotted time, it will be possible to use the updated furniture .
    

    

    A little patience, attention and accuracy in work, and painting the table with your own hands will be easy and fast.

decoration

Using tulle

We prepare the surface for painting with sandpaper or using grinder. Then paint in 2 layers white acrylic paint . We close all the places that should not be painted in white shade with masking tape. We lay a piece of moistened tulle on the surface, carefully straighten all the creases and wrinkles. We paint with acrylic blue paint from a can. Let dry, varnish with clear varnish.

The result is very beautiful and stylish.

DIY decoupage technique

Apply applications to the surface table You can use decoupage napkins.

We will need the napkins themselves, which can be bought at any art store, special glue, water-based varnish, acrylic varnish, primer.

For work, we need sandpaper, a fan brush, a roller.

How to age a tree

brush tree with their own hands, giving it the appearance of an aged wood, pretty simple.

Not all types of wood lend themselves to this type of finish.

It is better to take materials with a pronounced texture. This is ash, pine, oak. Exotic species - beech, maple - do not lend themselves well to this type of processing.Do not brush on MDF panels.

To get the desired effect, process old surface using a metal brush, grinder or drill with a wire nozzle.

Protective goggles and a mask must be worn during handling.

Chemical method

We clean the surfaces with sandpaper, wipe to darken ammonia. Texture wood become more pronounced and distinct.

If you overdo it, the wood will be loose.

Top processed furniture We grind with an abrasive, go through again with fine-grained sandpaper and varnish.

Patination

We apply patina to the treated surface. It can be stain or other means. Deep pores will darken on a light background.

You can choose materials for painting in the desired color and completely cover the surface, wait for drying, then carefully remove partially upper layer sponge.

Enamel

Apply to the tree the desired shade of enamel, wait until it dries, paint the second layer with a lighter shade with a liquid consistency.

After drying, we pass with sandpaper.

On furniture the first layer . Get the effect of aging and attrition.

The surface is varnished in 2 or 3 layers and wiped with a cloth to a shine.

VIDEO: Painting and decorating the table with your own hands.

How often do you have to paint wooden crafts? For example, I never did this until I had a chance to paint the table. The fact is that the wood staining field becomes even more attractive and acquires a lot of useful properties. After I tell you about painting wooden surfaces and products, you will understand that this is a fairly easy process and you can do it yourself.

Painting wooden surfaces

Choosing the material to be painted

Painting a wooden table

Wood has always been very popular in the manufacture of furniture and interior decoration. But since it is natural material, when painting surfaces, all flaws and flaws can come out. Therefore, it is important here proper preparation products. We will talk about this immediately after we choose the paint we need.

To paint wood, you can use the following materials:

1. Lacquer and enamel is an almost transparent material that is used to protect surfaces. But even after such staining, wooden products acquire an attractive shade.
2. Paint - can completely change the color of the object being painted, but at the same time leave the original wood texture

Table of divisions by composition:

Important! Modern paints are distinguished by their naturalness. More precisely, they are less toxic than varnishes and enamels. That is why use a respirator when painting with such materials.

Impregnation can not only shade wooden elements, but also protect them from the effects of fire. They have antibacterial properties and are often used for woodworking.

We paint the table with our own hands

We paint wooden surfaces

The process of restoring and preparing a table for painting is not as complicated as it might seem. Prepare in advance the tools with which you will remove the old coating from wooden products. Of course, it is better to paint a disassembled wooden table, but if you are afraid of damaging some parts or it is better not to disassemble it, then it is allowed to paint like that. The main thing is to make sure that it is stable enough.

The technology of painting surfaces consists in the following sequence:

• The first step is to remove all layers of old varnish or paint. This process should be given special attention, because the quality of the painted wooden product will depend on it. Here we need various washes, a grinder or a building hair dryer
• When the cleaning process is completed, we remove all dirt and grease from the surfaces. Here a solvent comes to the rescue - its low cost allows us not to neglect this procedure.
• If, after removing the paint, the table flaunts with small holes or fallen knots. Then we prime the wood and then putty the right places. We clean the place of finishing and again remove all dust and dirt
• We are waiting for complete drying and only then we apply the substance with which it was planned to paint the table

We select a primer for a specific job

We paint wooden products ourselves

If painting occurs wooden walls or other elements, the choice of primer is also important. Therefore, I decided to compile a table of characteristics of the soils used:

We paint wooden products with our own hands

If you need to paint wooden walls, you need to choose the right material. And here it is worth paying attention to such factors:

1. What is the purpose of coloring compositions. For external work, you can apply oil paint, it will perfectly protect the walls from the harmful effects. Acrylic-based mixtures also help protect well, but they also have a much higher price than their predecessor.
2. Inside the house for wooden walls, it is better to use water-dispersion mixtures. Their advantage is fast drying and no smell.
3. To preserve the naturalness of wooden coatings, stain and varnish are used.
4. The amount of material required depends on how the paint spreads. Most often, manufacturers indicate everything on the packaging, and the application technology is prescribed there. But it's often better to consult a professional.
5. Painting materials are made for different weather conditions, and each has its own temperature threshold required for application or quality service. Look at the markings that are on the packages and ask for their decoding from sellers in hardware stores

Painting technology wooden materials does not differ from other painted places. For this process, you can use the following tools:

• Brush - a narrow and wide brush will help you both paint large areas and reach hard-to-reach places
• Roller - for it you still need to purchase a brush. It is she who will help paint those places where the roller will be helpless. By the way, he still needs some skill
• Sponge - suitable for craftsmen and professionals. If the painting of wooden elements is done by a beginner, then it is better for him to use other tools
• Atomizer - it will be very easy and simple to complete all processes with it. With such a tool, all work will go quickly and smoothly. The gun does not leave streaks and does not scatter in different directions as with brushes. This not only allows you to stay clean, but also saves on material.

As auxiliary tools for painting, you need to purchase paint trays, gloves and a protective face mask. Be sure to cover all furniture that may be exposed to coloring elements. Do-it-yourself painting will not be any problem if you are serious about the preparatory process.