Ranch-style houses. Ranch style house American ranch style in architecture house plans

"Rancho" - a great home for permanent residence. Building area 198.8 sq. m., and its dimensions are 12x12.

We will be happy to build a house on this project. The total cost of construction depends on the configuration. In addition, we are ready to change the layout of the project for free or build a house according to any of your projects or sketches.

The cost of construction may differ slightly from that posted on the site.

Equipment options

Complete set of frame houses

Foundation

Pile-screw

Tape

• Sand cushion: 300mm

Power frame

• Frame strapping: timber 150 * 150 mm
• Vertical racks made of planed board chamber drying(14-18% humidity), 1 grade, 150*50 mm
• Rack pitch no more than 580 mm, using a reinforced mounting system and additional protection of the frame from "cold bridges"

Interior partitions

• Vertical racks made of planed chamber-drying boards (14-18% humidity), 1st grade, 100*50 mm.

Internal load-bearing walls and partitions

Thermal insulation from environmentally friendly slab basalt insulation ROCKWOOL LIGHT BATTS or Paroc EXTRA

• External walls - in 3 layers (150 mm).
• Interior partitions - in 2 layers (100 mm)
• Interfloor ceilings - in 2 layers (100 mm)
• Attic floor (ceiling of the second floor) - in 3 layers (150 mm)

Roof - metal tile

• Steel thickness: 0.5mm
• Assorted colors

Exterior finish of the facade

• (Egger/Kalevala, class E1)

Interior wall decoration

Moisture resistant board OSB-3, 2500*1250*9 mm

Window

• Profile thickness 70mm
• Fittings: ROTO NT

Complete set of block houses

Foundation

• Sand cushion: 400 mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

External and internal bearing walls

All wooden structures antiseptic in two layers, with a special fire-bio protective composition. Installation power frame houses are made using a galvanized fastening system with double reinforcement.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• reinforced rafter system from a board 200 * 50 mm, 1 grade, with a step of 580 mm

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70 mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Complete set of brick houses

Foundation

Tape monolithic heavily reinforced pile-grillage

• Plinth height 600 mm, band width 400 mm
• Bored reinforced piles with a diameter of 200 mm, a depth of 2000 mm
• Sand cushion: 400 mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement and interfloor floor joists are made of board 50*200 mm, with a step of no more than 580 mm
• Mounted draft floor of the first floor

External and internal bearing walls

• outdoor bearing walls from aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
• Internal load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
• Masonry reinforcement every three rows
• Aerated concrete (gas silicate) blocks are placed on a special masonry adhesive
• Decorated window and door openings
• The device of brick reinforced belts for floors

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70 mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Complete set of houses from a bar

Wall material to choose from

Solid timber

Advantages:

• Affordable price
• Wide use
• Minimum delivery times
• Easy to build at home

Flaws:

• Additional costs for finishing or guarding
• Imperfect appearance
• Additional costs for antiseptic
• Increased cracking

Glued laminated timber

Advantages:

• Excellent appearance
• Very low shrinkage and shrinkage
• Does not crack
• Does not need additional processing

Flaws:

• Increased price
• Reduced vapor permeability of the material

Profiled timber

Advantages:

• Great look
• Making connections with departures (into the bowl)
• Tighter connection between crowns and in corner joints

Flaws:

• The need for a break to shrink
• The appearance of cracks on the surface over time

Foundation

Pile-screw

• VS-108/300/2500mm, TU 5260-001-84045723-2011
• Piles are twisted using special equipment
• Pile wall thickness 4 mm, blade thickness 5 mm
• Inside the piles are filled concrete mix M300
• Welded metal head, 200 * 200 mm
• The pile is covered with a 2-component factory protective composition

Tape

• Plinth height 600 mm, band width 300 mm
• Sand cushion: 300mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement joists, made of board 50*200 mm, with a step of no more than 580 mm
• Reinforced floor joists are made of chamber-drying planed boards of the 1st grade 50 * 200 mm (14-18% humidity), with a step of no more than 580 mm

External and internal bearing walls

• Exterior walls and gables made of timber 150 * 150 mm (possibly 200 * 200 mm)
• Internal bearing walls made of timber 150 * 150 mm (possibly 200 * 200 mm)
• Between the timber, an interventional insulation "jute fiber" or "lnovatin" is laid in 2 layers
• The assembly of the corners of the house is carried out using the "warm corner" technology
• Installation of the crowns of the beam is carried out on a wooden dowel

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof

• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm
• Step-by-step crate 100*25 mm
• Mounted temporary roofing from roofing felt

↓

Complete set of log houses

Wall material to choose from

• Rounded (calibrated) log
• Carriage (Norwegian felling)
• planed log
• scraped log
• debarked log

Foundation

Pile-screw

• VS-108/300/2500mm, TU 5260-001-84045723-2011
• Piles are twisted using special equipment
• Pile wall thickness 4 mm, blade thickness 5 mm
• Inside the piles are filled with concrete mix M300
• Welded metal head, 200 * 200 mm
• The pile is covered with a 2-component factory protective composition

Tape

• Plinth height 600 mm, band width 300 mm
• Sand cushion: 300mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement joists, made of board 50*200 mm, with a step of no more than 580 mm
• Reinforced floor joists are made of chamber-drying planed boards of the 1st grade 50 * 200 mm (14-18% humidity), with a step of no more than 580 mm

External and internal bearing walls

• External walls and gables made of logs 240 mm (possibly 280 mm)
• Internal load-bearing walls made of logs 240 mm (possibly 280 mm)
• Interventional insulation "jute fiber" or "lnovatin" is laid between the logs in 2 layers
• dowels, sealing tape for sealing
• Beams - treated with fire-retardant composition.

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm
• A four-layer diffusion membrane is used to protect the roofing system

Power frame - from a planed board of the 1st grade 100 * 150 mm

thermal insulation

• External walls - non-combustible polystyrene foam (150 mm)
• Interior partitions - environmentally friendly slab basalt insulation(100 mm)
• The floor of the first floor is non-combustible polystyrene foam (150 mm)
• Attic floor (ceiling of the second floor) - environmentally friendly slab basalt insulation (100 mm)

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors

Exterior finish of the facade

• Ventilated façade: 35*35 mm timber counter-lattice
• Painted galvanized ebbs are mounted on the plinth along the outer perimeter

Interior wall decoration

Moisture resistant board OSB-3, 2500*1250*9 mm

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Well, friends, you have your own own house. The question immediately arises - in what style to equip this very house? There are many of these styles now. This is a Swiss chalet, Russian folk hut, Gothic style, Art Nouveau style, East style... and much, much, much!

Home improvement in the style of an American ranch

We offer you to equip your favorite home in American ranch style. This style appeared, as you know, in America. Sometimes this style is divided into subspecies - California ranch and American ranch. This style was very popular in the middle of the twentieth century. Ranch-style houses were built in different regions world - Europe and Australia. But Australia also has its own style, similar to the American one. The style of the American ranch is a true "American product".

Experts believe that he "grew" from Spanish colonial style. Indeed, you can find a lot of similarities between these two styles. The houses of these styles are not symmetrical in plan and are built from cheap local materials. Such houses were built from improvised materials. Everything went into the business - bricks, stones, boards, etc. The most important thing is low cost and quick results. Also from the Spanish style came the large opening of the veranda.

The popularity of the ranch style peaked in the 20th century, when the economic boom began. Houses of this style are still considered economy class. In America, houses of one-story buildings are still built and are being built in this style. This style is similar to the farmhouse style. Such houses are often found in the Baltics, although farm-style houses are more symmetrical.

American ranch style interior

This style began to develop in California. The architects of this particular state designed it, combining the Spanish rural colonial style and the modern, at that time, American style. As a result of this, a style appeared - Western ranch or American ranch.

The interior in this style can be very bright, colored, with a lot of "rags in a flower", ruffles, frills and pads. And simple - masculine and cowboy. In both cases, the style of the ranch is comfort and naturalness. Thanks to all this, the ranch style does not lose popularity. For home improvement, forged accessories and skins are widely used. Characteristics The ranch style is shown through materials - the emphasis is on the abundance of tinted wood in an emphatically rough finish, without carving. The floors in the rooms are laid out ceramic tiles under the stone.

In general, this style is economical, which is very important, especially during the financial crisis. You can not spend money on expensive Construction Materials. Much can be done by hand.

If we talk about an American ranch-style setting, then it will suit very well. wooden furniture or wicker wicker furniture. Antique furniture will also fit in very harmoniously. It can be a chest or a rocking chair. All items in this style should be simple and practical. Can be placed on shelves earthenware, it is possible with an ornament. There will also be woven paths self made and round rugs.

American ranch style limits the use of materials such as plastic and glass. Preference is given natural materials."Be close to nature!" - this is the main motto of this style.

Fresh flowers, wicker baskets and chests, unusual tree branches will look very harmonious.

Ranch-style accommodation preferred arrange in one color scheme- blue, beige, yellowish, with various shades. For blue wallpapers, for example, it is good to choose carpets in blue-gray tones, rugs in dark blue, and furniture should be white.

The fireplace is an integral part of the American ranch style. Of course, it is desirable that it be real. But if there is no possibility, then an artificial one is also suitable, just try to make it as realistic as possible. Good for finishing a mantelpiece fake diamond And natural wood. But you need to remember that this style is warm and homely, so the use of the stone must be very strictly dosed. You can create a relaxation area around the fireplace - place a sofa, an armchair, a small table with a tea set.

Cozy house in the style of an American ranch - photo

When choosing accessories, you should pay attention to any items of rural life. For example, a cowboy hat will look very good.

Also in the style of the American ranch, great importance is attached to lighting a house or apartment. The house should have a large number of large windows for the influx of natural light. When designing windows, it is worth abandoning complex draperies. They are replaced by the pattern and texture of the fabric. It is suggested to use simple curtains with a minimum number of folds. Artificial lighting is provided by luminaires, both hidden and obvious. For evening lighting, you need to select lamps with soft, diffused light, reminiscent of daylight.

The most acceptable area for an American ranch style is 60 sq.m., which include two bedrooms, a hall and a kitchen. Of course, options with a larger area are also possible. It all depends on your desires and financial capabilities. The main thing is not to lose a sense of proportion and style. Hold on, friends! We hope that our advice will help you with this.

"Rancho" - good house for permanent residence. The building area is 198.8 m 2, and its dimensions are 12x12. A distinctive feature of the house is the attic.

Construction organization "Lesstroy" will be happy to build a house according to this project. The total cost of building a house depends on the chosen configuration. We can also redevelop the project for free or build a house according to any of your projects or sketches.

The total cost of construction may differ from that presented on the site.

Equipment options

Complete set of frame houses

Power frame

• Frame strapping: timber 150 * 150 mm
• Vertical racks from planed boards of chamber drying (14-18% humidity), 1 grade, 150*50 mm
• Rack pitch no more than 580 mm, using a reinforced mounting system and additional protection of the frame from "cold bridges"
• To protect the frame: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film

Interior partitions

• Vertical racks made of planed chamber-drying boards (14-18% humidity), 1st grade, 100*50 mm.
• On both sides of the frame racks are mounted with a vapor-permeable membrane Izospan.

Thermal insulation from environmentally friendly slab basalt insulation ROCKWOOL LIGHT BATTS or Paroc EXTRA

• External walls - in 3 layers (150 mm).
• Interior partitions - in 2 layers (100 mm)
• Interfloor ceilings - in 2 layers (100 mm)
• Attic floor (ceiling of the second floor) - in 3 layers (150 mm)

Roof - metal tile

• Steel thickness: 0.5mm
• Assorted colors

Exterior finish of the facade

• (Egger/Kalevala, class E1)

Interior wall decoration

Moisture resistant board OSB-3, 2500*1250*9 mm

Window

• Profile thickness 70mm
• Fittings: ROTO NT

Complete set of block houses

Foundation

• Sand cushion: 400 mm

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

External and internal bearing walls

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70 mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Complete set of brick houses

Foundation

Tape monolithic heavily reinforced pile-grillage

• Plinth height 600 mm, band width 400 mm
• Bored reinforced piles with a diameter of 200 mm, a depth of 2000 mm
• Sand cushion: 400 mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement and interfloor floor joists are made of board 50*200 mm, with a step of no more than 580 mm
• Mounted draft floor of the first floor

External and internal bearing walls

• External load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
• Internal load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
• Masonry reinforcement every three rows
• Aerated concrete (gas silicate) blocks are placed on a special masonry adhesive
• Decorated window and door openings
• The device of brick reinforced belts for floors

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm
• A four-layer diffusion membrane is used to protect the roofing system

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70 mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Complete set of houses from a bar

Wall material to choose from

Solid timber

Advantages:

• Affordable price
• Wide use
• Minimum delivery times
• Easy to build at home

Flaws:

• Additional costs for finishing or guarding
• Imperfect appearance
• Additional costs for antiseptic
• Increased cracking

Glued laminated timber

Advantages:

• Excellent appearance
• Very low shrinkage and shrinkage
• Does not crack
• Does not need additional processing

Flaws:

• Increased price
• Reduced vapor permeability of the material

Profiled timber

Advantages:

• Great look
• Making connections with departures (into the bowl)
• Tighter connection between crowns and in corner joints

Flaws:

• The need for a break to shrink
• The appearance of cracks on the surface over time

Foundation

Pile-screw

Tape

• Sand cushion: 300mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement joists, made of board 50*200 mm, with a step of no more than 580 mm
• Reinforced floor joists are made of chamber-drying planed boards of the 1st grade 50 * 200 mm (14-18% humidity), with a step of no more than 580 mm

External and internal bearing walls

• Exterior walls and gables made of timber 150 * 150 mm (possibly 200 * 200 mm)
• Internal bearing walls made of timber 150 * 150 mm (possibly 200 * 200 mm)
• Between the timber, an interventional insulation "jute fiber" or "lnovatin" is laid in 2 layers
• The assembly of the corners of the house is carried out using the "warm corner" technology
• Installation of the crowns of the beam is carried out on a wooden dowel

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof

• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm
• Step-by-step crate 100*25 mm
• Temporary roofing made of ruberoid is installed

↓

Complete set of log houses

Wall material to choose from

• Rounded (calibrated) log
• Carriage (Norwegian felling)
• planed log
• scraped log
• debarked log

Foundation

Pile-screw

• VS-108/300/2500mm, TU 5260-001-84045723-2011
• Piles are twisted using special equipment
• Pile wall thickness 4 mm, blade thickness 5 mm
• Inside the piles are filled with concrete mix M300
• Welded metal head, 200 * 200 mm
• The pile is covered with a 2-component factory protective composition

Tape

• Plinth height 600 mm, band width 300 mm
• Sand cushion: 300mm
• High-strength rebar d12 mm class AIII
• Prefabricated concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

• Reinforced basement joists, made of board 50*200 mm, with a step of no more than 580 mm
• Reinforced floor joists are made of chamber-drying planed boards of the 1st grade 50 * 200 mm (14-18% humidity), with a step of no more than 580 mm

External and internal bearing walls

• External walls and gables made of logs 240 mm (possibly 280 mm)
• Internal load-bearing walls made of logs 240 mm (possibly 280 mm)
• Interventional insulation "jute fiber" or "lnovatin" is laid between the logs in 2 layers
• Dowels, sealing tape for sealing
• Beams - treated with fire-retardant composition.

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors
• Reinforced truss system from a board 200 * 50 mm, grade 1, with a step of 580 mm
• A four-layer diffusion membrane is used to protect the roofing system

Completion of houses from SIP-panels Double waterproofing of the foundation is used.

Internal load-bearing walls and partitions

• Made using frame technology
• Vertical racks from planed boards of chamber drying (14-18% humidity), 1 grade, 100*50 mm and 150*50 mm

Roofing system

• To protect the roofing system: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film.

All wooden structures are antiseptic in two layers, with a special fire-bio protective composition. The load-bearing frame of the house is mounted using a galvanized double-reinforced fastening system.

thermal insulation

• External walls - non-combustible polystyrene foam (150 mm)
• Interior partitions - environmentally friendly slab basalt insulation (100 mm)
• The floor of the first floor is non-combustible polystyrene foam (150 mm)
• Attic floor (ceiling of the second floor) - environmentally friendly slab basalt insulation (100 mm)

Roof - metal tile

• Cover: polyester, with 15 years quality guarantee
• First class galvanizing - 275 g/sq.m.
• Steel thickness: 0.5mm
• Assorted colors

Exterior finish of the facade

• Ventilated façade: 35*35 mm timber counter-lattice
• Painted galvanized ebbs are mounted on the plinth along the outer perimeter

Interior wall decoration

Moisture resistant board OSB-3, 2500*1250*9 mm

Window

• PVC window structures REHAU SIB-Design, standard sizes
• Profile thickness 70mm
• 2-chamber double-glazed window (3 glasses), 5-chamber profile (white color), mosquito nets
• Fittings: ROTO NT

Interior Design country house in country style is one of the many housing design options that will always remain relevant. Sterile minimalism, space hi-tech, mysterious Scandinavian or oriental looks are styles that in some cases can lose out to more classic options. But any image will be quite modern if the process of its formation is approached with soul and love. This Vancouver country house is a perfect example of this.

BEFORE

60 years is a long time for a house that has never been reconstructed and has not undergone major repairs. This is clearly visible in the photo: plywood sheets, sheet pile panels and everything wall decoration look deplorable.

Some of the walls are damp, while others are clearly visible mechanical damage. In general, the ranch looked more like an old garage than an apartment building. It seemed as if time had stopped here in the middle of the last century!

However, the designers wanted to preserve the original elements of construction and decoration as much as possible, restoring them and preserving the unique atmosphere of the Wild West.

AFTER

Fireplace in the interior of the room plays a key role. The unusual geometry of the first floor simply captivated the craftsmen, who more often came across regular-shaped rooms - square, rectangular and even round.

The architects removed unnecessary partitions from the living room - this made the room more spacious. Another major change in the interior was large window decoration- more precisely, the windows that adorn every wall of this original room. Thus, the owners of the house received not only a spacious and bright living room, but also the opportunity to admire the magnificent landscape around.

The wooden structure of the ceiling - to the left of the fireplace - was decided to be left and slightly updated. This element performs not only a decorative function, but also hides some of the shortcomings of the elaborate layout.

The light tones of wood emphasize the illumination and dimensions of the room, freed from unnecessary walls. This is especially noticeable against the background of contrasting dark shades.

BEFORE

Upholstery corner sofa once harmonized very well with the texture of a brick wall. However, over time, the fabric faded, and the bright original image faded. After the reconstruction, the sofa remained in its place, but received a new upholstery made of light-colored textiles.

AFTER

Openwork Brick wall remained intact, but on its back, the designers placed a screen of smoky green glass. This decision made it possible to give the interior mystery and depth. The source of this effect was the emerald highlights and mysterious shadows that appeared thanks to the glass.

The heated floor, installed in the 50s of the last century and no longer functioning, was decided not to be removed. Instead, a new coating was poured right on top of it, equipped modern elements heating. Yes, the room lost a few centimeters in height, but this made it possible to avoid long and routine work, which, by the way, would have cost the new owners a lot of money.

All beams and rafters are made of spruce, and the ceiling boards are made of cedar. This combination gives not only the necessary reliability, but also a special color combination in the interior creating an atmosphere of comfort and coziness.

The second floor has also undergone modernization, as a result of which additional windows appeared there, opening a view of the forest around the house and visually increasing the height of the ceilings.

Original decor and interior items, like this unusual sconce, demonstrate a design concept that is based on the combination of classic american style and fresh creativity.

The bookcase, installed by the very first owners of the house, had to be not only restored, but also slightly changed due to the fact that the floor level was raised. The power of time and good quality emanates from the old rack, which is transmitted to the entire interior, creating a special comfort in the house.

BEFORE

The kitchen originally had a look that fully corresponded to the spirit of that time. Completely closed from human eyes, "hidden" in wood paneling, she could cause an attack of claustrophobia.

Despite some advantages - solid finishes and a through passage connecting several rooms - this part of the house did not escape the work aimed at its complete modernization.

AFTER

Kitchen with fireplace, designed in the style of the general concept of the new design of the house, looks simply incredible. The spacious room with original kitchen island, quartz worktops, walnut hanging drawers and new equipment is pleasing to the eye and conducive to any, even the most daring culinary experiments. In such a kitchen, you want to create and surprise!

From the “old-style” kitchen, only the original frying pans, pots and pans came in handy. Everything else has undergone drastic changes.

Transparent window installed instead kitchen apron directly above the work surface, brings in sunlight and good mood. A with reverse side windows, that is, from the outside of the house, the craftsmen equipped a kind of bar counter, which turned this part of the kitchen into a summer corner for breakfast or dinner.

One of the goals of the reconstruction of the house was to provide free access to the street from different rooms, which was not provided here earlier. Home office with two doors leading to different parts of the yard - perfect solution this task.

White color in the interior rooms and plenty of sunlight give the room visual depth and spaciousness, creating a great atmosphere for creativity.

It was decided to turn the spaces between the rafters into original sources of artificial light. For this, special transparent panels and built-in models of LED lamps were used.

The facade of the building has lost its appeal over time. The same thing happened with the rear facade overlooking the backyard of the house. Agree that having a barbecue against the backdrop of dull dilapidated walls is not at all fun? I had to update the house and outside!

Large window decoration overlooking the courtyard, a bar counter, plants on the patio wonderfully transformed the exterior of the house.

BEFORE

The small living room looked uncomfortable and abandoned. Even a soft sofa and a TV did not save the situation.

AFTER

Drywall as new wall covering, large sofa, modern TV and electric fireplace in the interior gave the living room a new look. Now it is a favorite vacation spot of the owners of the house.

Built-in shelving original shelves as if specially created for designer accessories in the Greek style. New door leads to the bathroom. Stylish and practical, right?

The spacious bathroom is located at the back of the house. Now it has modern equipment installed, the minimalist finish has been updated in light colors, and large windows - including ceiling ones - fill it with sunlight.

A glass door from the bathroom leads to a secluded veranda with a cedar plank railing. Such a solution allows sunshine penetrate the room and at the same time protect from prying eyes.

Marble finishes, a comfortable snow-white bathroom, plenty of light and impeccable cleanliness - everything you need for a relaxing holiday in the "home spa-salon".

Categories:
Locations:

The style of "Ranch" in itself implies involvement in. It can be divided into two types: American and California. At one time (the fifties of the twentieth century), the ranch style was very popular. Later, its distribution reached Europe and Australia, although the latter also had its own version of the design of houses.

This version of architecture appeared when the development of the continent belonging to America was carried out. Some historians believe that the Spaniards were the first creators of the ranch, as there are some similarities with Spanish architecture in its details.

The main features of the American ranch

The building must be necessarily one-story, complete lack of symmetry, roof, present.

A large veranda should be attached to the house, be sure open type. The ceiling rests on thick ceilings or beams, there are deep vaults. . Sliding doors made of glass and leading to or courtyard. The walls are sheathed with ordinary, there is an imitation natural stone through .

The main elements of the decor are antique items: forged candlesticks, chests of drawers, armchairs, dishes. The fabric in the interior is distinguished by delicate shades and is natural. Around a lot of soft, pillows, carpets. Comfort is seen in everything. Do-it-yourself details are welcome and predominate. It can be furniture, forging, walls, wood panels. The main place in the house is the hearth, decorated with brick or natural stone.

Lighting and interior decoration

Previously, the main source of light in the American ranch was natural street light. That is why the windows were made so spacious. IN modern houses in the ranch style, this trend has continued, however, there are also artificial light sources. The most common are steel, sconces, copper lamps, forged candlesticks.

In our time, progress has stepped far forward, and consequently, the style of the ranch has undergone many changes. But its main features have been preserved. Many materials have been replaced with modern finishing components that mimic the ranch.

When building such a house, it is very important not to overdo it with modernity, since the ranch involves a complete immersion in antiquity. Therefore, more preference should be given to elements with antique finishes, but with modern functionality.