EXPLANATORY NOTE

In accordance with the Procedure for training in labor protection and testing knowledge of the labor protection requirements of employees of organizations, approved by the Decree of the Ministry of Labor of Russia and the Ministry of Education of Russia dated January 13, 2003 N 1/29, the employer (or a person authorized by him) is obliged for all persons hired, as well as for workers transferred to another job, to instruct on labor protection.

All persons hired, as well as employees seconded to the organization and employees of third-party organizations performing work in a dedicated area, studying educational institutions of the corresponding levels, undergoing industrial practice in the organization, and other persons participating in the production activities of the organization, undergo primary briefing at the workplace, repeated, unscheduled and targeted briefings.

Primary briefing at the workplace, repeated, unscheduled and targeted briefings are carried out by the immediate supervisor (manufacturer) of the work (foreman, foreman, teacher, and so on), who in due course training in labor protection and testing knowledge of labor protection requirements.

Conducting labor protection briefings includes familiarizing employees with the existing hazardous or harmful production factors, studying the labor protection requirements contained in the organization's local regulations, labor protection instructions, technical, operational documentation, as well as the use of safe methods and techniques for performing work.

The briefing on labor protection ends with an oral test of the knowledge and skills acquired by the employee of safe working practices by the person who conducted the briefing.

Initial briefing at the workplace is carried out before the start of independent work:

With all newly hired employees, including employees performing work on the terms of an employment contract concluded for a period of up to two months or for the period of seasonal work, in their free time from their main work (part-time workers), as well as at home (home workers) using materials, tools and mechanisms allocated by the employer or purchased by them at their own expense;

With employees of the organization transferred in the prescribed manner from another structural unit, or employees who are entrusted with the performance of new work for them;

With seconded employees of third-party organizations, students of educational institutions of the corresponding levels, undergoing work practice (practical classes), and other persons participating in the production activities of the organization.

Primary briefing at the workplace is carried out by managers structural divisions organizations according to programs developed and approved in accordance with the requirements of legislative and other regulatory legal acts on labor protection, local regulations of the organization, instructions on labor protection, technical and operational documentation.

This on-the-job training program has been developed in accordance with the Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS) and taking into account the characteristics of the working conditions and safety of a mobile compressor operator.

The program contains a list of normative, reference, educational and methodological and other documentation on labor protection recommended for preparing for the briefing on labor protection at the workplace.

CHARACTERISTICS OF THE WORK OF THE ENGINEER OF THE MOBILE COMPRESSOR

Control of a mobile compressor with an internal combustion engine used in construction, installation and repair and construction works. Maintenance and preventive maintenance of a mobile compressor with an internal combustion engine.

Should know: the device of a mobile compressor with an internal combustion engine, the rules and instructions for its operation, maintenance and preventive maintenance; rules traffic when working with cars on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements to the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one rank below the level of a machinist; rules, regulations and instructions for labor protection and fire safety; rules for the use of primary fire extinguishing means; methods of first aid in case of accidents; internal labor regulations of the organization.

INSTRUCTION PROGRAM

3.1. Working conditions for a mobile compressor operator

Features and characteristics of the working conditions of a mobile compressor driver. Typical causes of accidents and occupational diseases among machinists of the mobile compressor. Examples of accidents in the maintenance of a mobile compressor.

3.2. General requirements labor protection

The procedure for admission of a mobile compressor driver to maintenance of vessels operating under pressure. Age restrictions. Preliminary and periodic medical examinations. No medical contraindications for health reasons.

Types of briefings on labor protection: introductory, primary at the workplace, repeated, unscheduled, targeted. Training, certification, testing of knowledge of the Rules for the Design and Safe Operation of Pressure Vessels. The amount of knowledge that a mobile compressor operator should have. Requirements for the presence of a certificate for the right to work as a driver.

Requirements for familiarization with the instructions on labor protection before admission to independent work. Rules for admission to work of increased danger.

Requirements for an internship under the guidance of an experienced mobile compressor driver to acquire practical work skills.

Dangerous and harmful production factors that may have an adverse effect on the driver of a mobile compressor during operation.

Adverse impact of hazardous and harmful production factors on the human body.

Production situations that pose the greatest danger to the driver of a mobile compressor: the possibility of an explosion of a system operating under pressure of compressed gas.

Actions of a mobile compressor driver in case of illness, poor health. Actions of a mobile compressor driver if an accident occurs with any of the workers. First aid methods. Use of a medical kit.

Labor and production discipline, internal labor regulations. Working hours and rest time.

Fire and explosion safety measures during the operation of a mobile compressor. Primary fire extinguishers.

Rules of personal hygiene during the operation of a mobile compressor.

Responsibility for violation or non-compliance with the requirements of labor protection instructions.

3.3. Occupational safety requirements before starting work

Actions of the mobile compressor driver before starting work.

Requirements for special clothing, special footwear and other personal protective equipment against exposure to hazardous and harmful production factors.

The device and principle of operation of mobile compressors with an internal combustion engine. Design features mobile compressor with internal combustion engine.

Equipment performance requirements.

Safety requirements for sites where the compressor is located.

Requirements for the presence and serviceability of shields protecting the moving parts of the compressor mechanisms.

Requirements for the serviceability of all its pressure gauges and safety valves.

Requirements for the presence and level of oil in the gearbox and air filters of the compressor.

The actions of the driver when installing the compressor in a new place after its relocation.

Faults in which the compressor equipment must not be allowed to operate. Prohibition to operate the compressor:

In case of malfunctions specified in the manufacturer's instructions for the operation of the compressor, in which its use is not allowed;

In case of untimely carrying out of the next tests (technical examination) of the compressor and receiver;

In case of malfunction of pressure gauges or safety valves in the compressor pneumatic system; pressure gauges and safety valves must be tested and sealed in a timely manner;

In case of insufficient illumination of the workplace and approaches to it;

In case of malfunction of the valves on the distributing comb.

Prohibition to operate the compressor of people who do not have the appropriate permission.

Prohibition to start work on untested or faulty compressor equipment.

3.4. Occupational safety requirements during work

Rights and obligations of persons responsible for the correct and safe operation of a mobile compressor with an internal combustion engine.

Safety measures when starting, stopping, regulating the operation of the engine.

Security measures when using instrumentation.

Safety requirements for refueling the engine, lubricating units and auxiliary mechanisms.

Safety measures when performing current repairs and engine repairs.

Precautions for opening, inspecting, assembling and disassembling the engine during revision.

Prohibition for the driver:

Start the compressor engine at a pressure in the air receiver above atmospheric;

Connect hoses directly to the line or tool without valves on the line;

Allow hoses to break, tangle and twist, as well as contact with hot and oily surfaces;

Direct the jet of compressed air towards yourself or other workers;

Change sharply the pressure in the pneumatic system;

Maintain the compressor, including cleaning, adjusting or lubricating individual parts during its operation;

Repair individual mechanisms, air ducts or hose connections with the compressor running;

Leave workplace with the engine running.

Safety requirements when working with metalwork tools.

3.5. Labor protection requirements in emergency situations

Actions of the mobile compressor driver in the event of emergency, upon detection of violations of labor protection requirements that pose a threat to health or personal safety. Malfunctions in the event of which the operation of the mobile compressor must be immediately stopped.

Actions of the driver of a mobile compressor in the event of a fire. The procedure for using primary fire extinguishing equipment.

Actions of a mobile compressor driver in case of accident, poisoning, sudden illness. Methods of providing first aid to the victim. Wound care and dressing.

3.6. Occupational safety requirements at the end of work

Actions of the driver of the mobile compressor at the end of work. The order of surrender.

Precautions for cleaning up the workplace and tools.

Requirements to proper storage and care for overalls, footwear and other personal protective equipment.

Requirements for reporting all problems and malfunctions of compressor equipment noticed in the process of work, as well as other violations of labor protection requirements to their immediate supervisor.

Rules for personal hygiene at the end of work.

4.1. GOST 12.2.016-81* SSBT. Compressor equipment. General safety requirements.

4.2. Safety requirements in the production of work using hand tools(collection of normative documents). - M.: NIC "Normative-Inform", 2004.

4.3. FNP "Industrial safety rules for hazardous production facilities that use equipment operating under excessive pressure", approved by order of Rostekhnadzor dated March 25, 2014 N 116.

4.4. Fire regulations in Russian Federation, approved by Decree of the Government of the Russian Federation of April 25, 2012 N 390.

4.5. Intersectoral rules for providing workers with special clothing, special footwear and other personal protective equipment, approved by order of the Ministry of Health and Social Development of the Russian Federation of June 1, 2009 N 290n.

4.6. Lists of harmful and (or) dangerous production factors and work, during the performance of which preliminary and periodic medical examinations (examinations) are carried out, and the procedure for conducting preliminary and periodic medical examinations (examinations) of workers engaged in heavy work and in work with harmful and (or ) dangerous working conditions, approved by the order of the Ministry of Health and Social Development of Russia dated April 12, 2011 N 302n.

4.7. The list of first aid measures and the List of conditions under which first aid is provided are approved by order of the Ministry of Health and Social Development of Russia dated May 4, 2012 N 477n.

Similar information.

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Mobile compressor driver with an internal combustion engine of the 5th category" belongs to the category "Workers".

1.2. Qualification requirements - complete or basic general secondary education. Vocational education. Training. Work experience as a compressor driver and a locksmith for the repair of construction or other machines of the 4th category of similar complexity for at least 1 year.

1.3. Knows and applies:
- device, principle of operation, specifications compressor;
- causes, methods of manifestation and troubleshooting;
- rules for the performance of work and technical requirements for their quality;
- lubrication regimes;
- consumption rates of fuel and lubricants, ways to save them;
- Plumbing for the repair of construction or other machines of similar complexity.

1.4. Appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. Reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. Supervises the work _ _ _ _ _ _ _ _ _ _ .

1.7. During the absence, he is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Manages a mobile compressor with an internal combustion engine during the production of compressed air for pneumatic mechanisms, mechanized tools and machines and devices.

2.2. Performs daily Maintenance compressor, participates in its scheduled preventive maintenance.

2.3. Manages a mobile compressor with an internal combustion engine with a capacity of 10 to 50 m3/min.

2.4. Knows, understands and applies the current regulatory documents relating to its activities.

2.5. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

The driver of a mobile compressor with an internal combustion engine of the 5th category has the right to:

3.1. Take action to prevent and correct any violations or nonconformities.

3.2. Receive all social guarantees provided for by law.

3.3. Require assistance in the performance of their official duties and exercise of rights.

3.4. Require the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. Get acquainted with draft documents related to its activities.

3.6. Request and receive documents, materials and information necessary for the performance of their duties and instructions of the management.

3.7. Improve your professional qualifications.

3.8. Report all violations and inconsistencies identified in the course of their activities and make proposals for their elimination.

3.9. Familiarize yourself with the documents that define the rights and obligations of the position held, the criteria for assessing the quality of performance of official duties.

4. Responsibility

The driver of a mobile compressor with an internal combustion engine of the 5th category is responsible for:

4.1. Failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. Failure to comply with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. Disclosure of information about an organization (enterprise/institution) that is classified as a trade secret.

4.4. Non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. Offenses committed in the course of their activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. Causing material damage to an organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. Unlawful use of the granted official powers, as well as their use for personal purposes.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Instructions for the position " Driver of a mobile compressor with an internal combustion engine of the 4th category", presented on the website, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. Issue 64. Construction, installation and repair and construction work. (Including additions approved: by order State Committee on construction and architecture N 25 of 08/08/2002, N 218 of 12/22/2003, N 149 of 08/29/2003, by letter of the State Committee for Construction and Architecture N 8 / 7-1216 of 12/15/2004 , by order of the Ministry of Construction, Architecture and Housing and Communal Services N 9 of 02.12.2005, N 163 of 10.05.2006 N 399 of 05.12.2006, by order of the Ministry of Regional Development, Construction and Housing and Communal Services of Ukraine N 558, 28.12.2010)", which was approved by order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on 13.10.1999 N 249. Agreed by the Ministry of Labor and Social Policy of Ukraine. Entered into force on January 1, 2000. The status of the document is "valid".

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Mobile compressor driver with an internal combustion engine of the 4th category" belongs to the category "Workers".

1.2. Qualification requirements - complete or basic general secondary education. Vocational education. Training. Work experience in a related profession as a machinist and mechanic for the repair of construction or other machines of the 3rd category of similar complexity for at least 1 year.

1.3. Knows and applies:
- device, principle of operation, technical characteristics of the compressor;
- causes, methods of manifestation and troubleshooting;
- rules for the performance of work and technical requirements for their quality;
- lubrication regimes;
- consumption rates of fuel and lubricants, ways to save them;
- Plumbing for the repair of construction or other machines of similar complexity.

1.4. The driver of a mobile compressor with an internal combustion engine of the 4th category is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. The driver of a mobile compressor with an internal combustion engine of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The driver of a mobile compressor with an internal combustion engine of the 4th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The driver of a mobile compressor with an internal combustion engine of the 4th category during his absence is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Manages a mobile compressor with an internal combustion engine during the production of compressed air for pneumatic mechanisms, mechanized tools and machines and devices.

2.2. Performs daily maintenance of the compressor, participates in its scheduled preventive maintenance.

2.3. Manages a mobile compressor with an internal combustion engine with a capacity of up to 10 m3 / min.

2.4. Knows, understands and applies the current regulatory documents relating to its activities.

2.5. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to take actions to prevent and eliminate any violations or inconsistencies.

3.2. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to receive all social guarantees provided for by law.

3.3. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his duties and instructions of the management.

3.7. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to improve his professional qualifications.

3.8. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The driver of a mobile compressor with an internal combustion engine of the 4th category has the right to get acquainted with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for disclosing information about an organization (enterprise / institution) that is a trade secret.

4.4. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for causing material damage to an organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The driver of a mobile compressor with an internal combustion engine of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

The compressor unit operator is a specialist who ensures uninterrupted operation, maintains it, prepares it for starts and stops. In work it is obliged to support the established technological rhythm.

With the help of automation, measuring and control devices, protection and alarm systems, as well as blocking, the compressor unit operator inspects the equipment and determines the causes of breakdowns, after which it eliminates them.

Requirements

The job description for a compressor unit operator describes a list of duties that require the absence of contraindications. If an employee has health problems, then it is strictly forbidden to work on this installation.

The compressor unit operator must have vision that is resistant to fatigue. Sharp vision with normal color discrimination is one of the important criteria.

Good hearing, a keen sense of smell, a developed memory are qualities that must be on high level.

Physically demanding work requires a lot of endurance. In case of health problems, as a result of which large physical exercise and monotonous work, the employee must be relieved of his post.

The ability to work in a large team is an important personal skill, without which it is difficult to imagine the work of a mechanic.

Contraindications to work in this position are violations of the vestibular apparatus, hearing and vision impairment, predisposition to colds.

Qualifications

This employee has a difficult and responsible job. The engineer of compressor units must have extensive knowledge in the field of chemistry, physics, and electrical engineering. Knowledge of types and species is required to perform quality work.

Knowledge technological processes used in production are the key to successful work.

It is also necessary to know the principles of operation of the installation, the design of the compressor, electric motors, as well as the instruments with which measurements are taken.

Discharges

According to the handbook, there are 5 categories of compressor unit operators. For each put forward their own requirements for professional training, as well as describes the duties that must be performed by an employee in this position.

In the ETKS classifier, machinists of the second, third, fourth, fifth and sixth categories are distinguished.

The highest is the second category, it is subject to the highest requirements for experience and skills. The sixth, respectively, is the lowest.

The ranks of the compressor unit driver are assigned according to work experience. Responsibilities depend on the category, as well as the level of remuneration.

Second rank

The driver of the compressor unit of the second category serves compressors with a working pressure of up to 10 kgf / cm 2 (1 MPa). The supply of this unit is 5 m 3 / min.

Duties include:

• start, stop and regulation of compressors;
• monitoring the operation of auxiliary equipment, as well as the compressors themselves;
• lubrication of parts of mechanisms experiencing friction;
• prevention of malfunctions in the operation of the compressor;
• troubleshooting;
• monitoring the operation of safety devices;
• repair of drive motors;
• filling oil into emergency tanks and consumable tanks, as well as pumping oil;
• participation in the repair of compressor equipment.

Knowledge for the second category

The compressor unit operator's instruction assumes the presence of professional knowledge, without which it will be impossible to perform direct duties.

The employee must know:

• principles of operation of a turbocharger;
• principle of operation of a piston compressor;
• operation of steam engines and turbocompressors;
• the principle of operation of electric motors;
• ways to troubleshoot engines and compressors;
• methods of using instruments for measurement and control, as well as the purpose of each instrument;
• station piping scheme;
• operating pressure and air temperature corresponding to each mode;
• permissible temperature to which the operating unit of the unit can be heated;
• ways to eliminate overheating, as well as measures to prevent overheating;
• grades of oils used in the installation for lubricating units.

Third rank

The compressor unit operator is trained not only in vocational schools or universities. There are advanced training courses, after passing which the student is issued a certificate of awarding him a higher level.

Turbocompressors and stationary compressors with operating pressure up to 10 kgf/cm 2 (1 MPa), flow - above 5 m 3 /min. and up to 100 m 3 / min. Or installations with a pressure above 10 kgf / cm 2 (1 MPa) and a supply of up to 5 m 3 / min. when working with non-hazardous gases driven by different engines.

For a specialist of the third category, the duties are:

• regulation and start-up of compressors, engines and turbochargers;
• maintaining the necessary parameters of the compressor;
• switching of various units;
• prevention of emergency situations in the operation of the station;
• Preparation technical documentation on the operation of the serviced equipment;
• taking part in the repair of units and parts of the station.

Knowledge for the third category

An employee with the third category must know:

• reciprocating compressors, internal combustion engines, electric motors, steam engines and installations;
• technical characteristics of the described units and rules for their maintenance;
• arrangement of control and measuring equipment, maintenance rules and technical specifications;
• installation piping scheme;
• documentation necessary for the operation of the installation;
• fundamentals of thermodynamics, as well as electrical engineering;
• properties of gases in compressor operation.

Fourth rank

A driver with the specified category serves turbochargers and stationary compressors up to 10 kgf / cm 2 (1 MPa). The supply in these plants is more than 100 m 3 /min.

The work is:

• establishing and maintaining an advantageous mode for the operation of the compressor;
• monitoring the serviceability of engines, instruments, mechanisms;
• participation in the inspection and repair of equipment (according to the qualifications of a locksmith with 3rd category).

Knowledge for the fourth category

To perform duties at a high level, you must know:

• design features, as well as the device various types compressors, internal combustion engines, turbochargers, electric motors, complex instruments for control and measurement, fittings and equipment, steam engines;
• layout of pipelines, steam pipelines, tanks and fittings;
• schemes according to which the automatic device for blocking the operation of the station is located;
• technical characteristics of the compressors that need to be serviced;
• electricity consumption rates for the normal operation of the station;
• consumption rates of materials for the production of gases or compressed air.

Fifth rank

The driver of the fifth category serves automated stations up to 100 m 3 / min.

His duties are:

• switching, as well as putting equipment into repair and standby state;
• regulation of technical processes;
• drawing up sheets of defects, as well as sheets for the repair of equipment;
• carrying out repairs of station equipment (qualification of a locksmith of the 4th category);
• repair of internal combustion engines and compressor units in field and emergency conditions.

Knowledge for the fifth category

A grade 5 mechanic should know internal organization good enough.

Required knowledge:

• kinematic diagrams of turbocompressors, electric motors, steam engines, internal combustion engines;
• high pressure compressors;
• operating rules and characteristics of auxiliary equipment, steam engines, electric engines, turbocompressor installations;
• technological processes of the station;
• Efficiency of the compressor and applied designs and systems.

Sixth rank

The work of a driver of the sixth category requires the greatest concentration, and knowledge must be supported not only by theory, but also by practice. Due to the fact that the serviced units have a large capacity, the employee must be able to carry out:

• observation of proper work equipment of the entire station;
• regulation of the process for the development of products of the station;
• drawing up defective statements;
• repair of equipment (qualification of a locksmith of the 5th category).

Knowledge for the sixth category

Knowledge is required:

• turbocharger designs;
• kinematic schemes;
• various power equipment: steam engines, electrical equipment, internal combustion engines;
• characteristics for the operation of compressor power plants.

Work safety

Occupational safety of a compressor unit operator is regulated by the current legislation of the Russian Federation. Labor legislation, as well as labor protection and life safety standards, establish permissible limiting operating conditions for mechanics. The mode of work is consistent with the qualifications and is based on the state of health of the employee.

Jobs

In Moscow, a compressor unit operator receives from 80,000 tr. An employee of this category is required at large manufacturing enterprises. To submit your resume for consideration, you need to monitor the labor market and keep track of emerging vacancies.

The issue is approved by the Decree of the Ministry of Labor and Social Development of the Russian Federation dated November 14, 2000 N 81

Mobile compressor operator

§ 10. Mobile compressor driver

Job Description. Maintenance of a mobile compressor unit, start and stop of a compressor, diesel engine. Laying communications, connecting them to the compressor unit and the wellhead. Carrying out work to increase the outflow of fluid from the well by creating a drawdown at the bottomhole, monitoring the inflow of fluid (oil). Adjustment of air supply during heat treatment of the bottomhole zone of the well. Participation in the work on the opening of productive layers with the use of gaseous agents and the elimination of complications in drilling. Adjustment of the operating modes of the compressor unit and diesel engine according to the readings of instrumentation. Monitoring the operation of all mechanisms and systems of a mobile compressor unit, establishing the main parameters of the unit in accordance with the technological regulations for drilling and testing (development) of wells. Identification and elimination of defects in the operation of the diesel engine, compressor and performance of current repairs of all systems of the compressor unit, including emergency protection systems, execution of documentation for the production of work and keeping a log of the operation of the unit. Driving.

Must know: methods of operation of oil, gas and injection wells; purpose, arrangement and operating rules of various systems of compressors, power equipment, automobile, instrumentation and automatic protection of the compressor unit; types of fuel, lubricants and cooling; methods for detecting and eliminating malfunctions in the operation of a mobile compressor unit; schemes for connecting communications from the compressor unit to the well; consumption rates of operating materials for the production of compressed air; basic information on heat engineering, electrical engineering, drilling and operational equipment, drilling technology, testing (development) and overhaul oil and gas wells; plumbing in the scope of work performed.

When working in exceptional cases (in wells that emit free hydrogen sulfide, wells with high wellhead pressure, etc.) on trailer or self-propelled mobile compressors under the guidance of a mobile compressor driver of a higher qualification - 3rd category;

when working on a trailed mobile compressor with a working pressure of up to 10 MPa (100 kgf / sq. cm) inclusive - 4th category;

when working on a trailed mobile compressor with a working pressure of more than 10 to 20 MPa (100 - 200 kgf / sq. cm) inclusive or on a self-propelled mobile compressor with a working pressure of up to 10 MPa (100 kgf / sq. cm) inclusive - 5th category ;

when working on a trailed mobile compressor with a working pressure of more than 20 MPa (200 kgf / sq. cm) or on a self-propelled mobile compressor with a working pressure of more than 10 MPa (100 kgf / sq. cm) - 6th category.