How to clean the bathroom from plaque. How to make a bathtub truly snow-white? Types of pollution and ways to deal with them. How to wash properly

A neat and clean bathroom will become the hallmark of every owner of a house or apartment. There are many options for cleaning the bathroom at home. By choosing the most effective method of the proposed, you can easily cope with the task. During the cleaning process, household chemicals or improvised means are used, which everyone can find in the house.

Cleaning products and folk methods for washing the bathroom

Before you decide how to wash the bathroom, it is important to consider the features of the coating of the product. IN special care acrylic models are needed, so not every tool is suitable for them. The use of powders or abrasive pastes for washing is not recommended, as they can leave scratches on the plastic. You can use acid detergents, but not too often. When dealing with rust ideal solution funds will become: "Mr. Chister", "Sanoks" and "Triton".

Do not forget that cast iron and acrylic baths are cleaned differently.

Enamelled steel and cast iron baths are washed with abrasive powders. When cleaning, it is better to refuse the use of caustic acids ("Adrilan") and the use of a metal brush. When choosing a detergent, carefully study the composition, as the regular use of aggressive chemicals can make plumbing rough and unpleasant to the touch.

Knowing which product will be effective for each type of soiling will make it much easier to deal with plaque in the bathroom. You can use at home not only professional, but also folk remedies that will help you quickly fix the problem at no extra cost. The methods listed below will allow you to effectively clean both walls and plumbing.

How to wash limescale?

Soda and vinegar will help to cope with this type of pollution. Process step by step:

Pre-mix half a cup of baking soda and water, and add ¼ tbsp. vinegar.
Treat the bathtub and walls with tiles with the prepared solution.
Wipe the plumbing with a damp sponge, and then additionally rinse the surface with water.
For acrylic models, use lemon juice instead of baking soda.

A solution of citric acid and soda will effectively deal with limescale on the walls and bath. Step-by-step instruction:

Pre-cook the pasta by adding a small amount of water to the baking soda.
Spread the consistency on the surface.
Dilute citric acid with water (in a ratio of 1: 1) and apply on top of soda.
After that, carefully wipe the problem area with a sponge and rinse with water.

When choosing household chemicals, give preference to the following products:

Ecover. You can safely use the liquid for a sink made of faience, an acrylic bath, ceramic tiles, porcelain.
Spray Comet. Suitable for removing limescale and rust on faucets, showers, tiles. It is not recommended to use for a bathroom with an enamelled bathtub and apply on walls made of natural stone.
Cilli Bang. Suitable for all types of bathtubs, tiled walls, sinks and toilets. The use of chemicals is not recommended for natural stone, copper and brass surfaces, galvanized products.

Before you clean plumbing fixtures or ceramics with one of the above products, carefully read the composition.

How to deal with mold and mildew

Using ordinary vinegar, you can wipe the mold from the joints between the tiles, as well as in the shower or on the side of the bathroom. In the process of cleaning, moisten the sponge in vinegar or, using a spray bottle, treat the problem area. Rinse off any dried residue with a damp cloth.

The real salvation against the fungus will be hydrogen peroxide or "Anti-fungus"

Pour the peroxide into a spray bottle and spray it onto walls, sinks, and showers. In the process of washing, do not forget to remove the remnants of fungus and mold with a damp sponge. Don't rub too hard on tile seams and dark plastics.

It will be possible to effectively clean the bathroom using professional tools:

Antiseptic "Dali". You can use the solution even when processing the kitchen and wooden surfaces. Due to the safe composition, it will help to effectively cope with the fungus.
"Anti-fungus". Helps to forget about any manifestations of fungus and mold.

Cleaning the bath of paint

It is necessary to wash the bath from fresh paint as quickly as possible, until the substance has had time to dry. Before using a cleaning agent, carefully remove adhering silicone or paint from the enamel with a blade. After that, put a lotion on the surface with a solvent, which is selected in accordance with the type of dye. It will be possible to remove the paint with the help of "White spirit" or another substance.

Cleaning of cement and primer

Before you clean tiles or plumbing from cement or primer, enlist the help of ATLAS SZOP. This chemistry will help to quickly cope with the task, however, it is not recommended to use it when working with acid-resistant surfaces.

It will be much easier to remove the primer while it is still fresh. When working with the consistency, use acetone or a special wash. Clean the bathroom to a shine and effectively deal with cement dust will help vegetable oil. Add a few tablespoons of oil to a bucket of warm water and wipe the surface with a damp cloth.

Cleaning the bathroom from glue and sealant

You can speed up the cleaning process if, before cleaning the walls in the bathroom detergent, first remove the adhesive base from the surface with a blade. Add a small amount of ammonia or vinegar to the water and leave the wet rag with the composition on the dried glue. The solution will quickly soften the product.

In the process of washing the sealant, try to pre-clean upper layer. In the event that a greasy mark remains on the bath (after removing the silicone), enlist the help of table salt. Moisten it and apply on gauze, wipe the problem area without strong pressure. With the help of "White spirit" and gasoline, the process of cleaning the bathroom will be significantly accelerated.

We remove rust quickly and efficiently!

While you are cleaning plumbing from rust, actively use household improvised means. Get rid of yellow spots lemon juice will help. Squeeze a few drops of lemon on the rusted area and wait 15 minutes. Rinse the area with a clean damp sponge.

A mixture of ammonia and hydrogen peroxide will help to cope with the problem. Mix 50 ml of peroxide and 100 ml of ammonia. Soak a rag in the solution and treat the problem area. Wipe the surface with a clean sponge after 15 minutes.

Make a paste by adding a small amount of water to the baking soda, then apply the gruel to the rust. Wait 10 minutes and rinse the tub with water. Do not use the consistency when cleaning an acrylic bath.

Still looking effective remedy against rust? "Kama" or powder "Surge" will be an excellent choice!

In the process of cleaning the bath from rust, you can safely use household chemicals that are affordable. Powder "Surge" and paste "Kama" will effectively cope with the task.

How to clean grout between tiles in a bathroom

To return the grout between the seams to its original appearance and effectively remove the remnants of soap and dirt, household chemicals will help. Use for the bathroom Silit, Fairy, CIF, AOS. Domestos and "Whiteness" will help to cope with the fungus and mold that has formed in the tile joints.

Still not sure how to quickly clean the dirt between the tiles? Then use a steam generator or prepare a mixture of baking soda and bleach!

A steam generator will help remove dirt without leaving stains and smudges on the tile. After hot steam cleaning, mold residues can be removed with a normal damp cloth.

If you mix bleach and baking soda, then you can clean the white grout between the seams. After applying the gruel, wait until it dries, and then sweep away the residue with a brush.

Seams can be treated with hydrogen peroxide. Dilute the liquid with water in a ratio of 1:2. The main plus is that you do not have to wash off such a tool. Mix water and vinegar in equal proportions, and then process the tiles and seams. Use toothbrush for better cleaning.

How to clean natural stone tiles

To care for this type of surface, as in the case of PVC panels in the bathroom, you need to be as careful as possible. It will be much easier to get rid of dampness if you wipe the natural stone with a rubber brush after completion. water procedures. Products that do not contain acids, as well as a solution of water with ammonia, will help to effectively remove the remaining foam. It is not recommended to use alcohol on a regular basis, as the stone may lose its brightness.

When caring for a stone, use Lindex spray, because it will help to effectively deal with stains. Brio Action is able to remove fungus and mold, Clean Ilpa is considered safe enough.
Before choosing an improvised product or household chemicals when cleaning the bathroom, be sure to consider the type of pollution. Gently clean the dirt from the acrylic bath and natural stone as these surfaces are easily damaged.

How nice to take a relaxing bath after a long hard day. Unfortunately, over time, even the newest and most beautiful bath can lose its impeccable appearance. There can be many reasons for this - hard tap water, frequent washing and washing. The problem of how to clean an old bath worries many housewives, and not in vain. Today, every store sells plumbing cleaners, but many of them are aggressive and can damage the enamel. In addition, household chemicals can be dangerous for young children. Is it possible to return the dazzling whiteness of an old bath, and will folk remedies help with this?

Every day the bath is exposed to minor pollution. These can include soap streaks, toothpaste marks, and water splashes. It is best to remove them regularly, so as not to be tormented by the question of how to wash the enamelled bath white. Before cleaning the bathroom, be sure to wet the surface so that the detergent can begin to work. After that, with a soft sponge, spread the product over the entire surface of the plumbing. If you use household chemicals, it is best to give preference to gels and pastes, as they work great and do not scratch the enamel. When you need to wash a very dirty bath, you can use a hard brush or an abrasive sponge surface.

When you start cleaning your bathroom, keep the following in mind:

If you need to clean an acrylic bathtub, buy a special cleaner from the store. Household chemicals for the care of acrylic are not cheap, but in this case it is better not to risk it.
Some category of household chemicals is used for gentle cleaning, so it will not help with rust and heavily stubborn stains.
Aggressive products based on acids and powders will solve such a problem as cleaning an old bathtub in just 2-3 applications, but at the same time they can damage the enamel.

Causes of pollution

The main factor in the appearance of plaque in the bathroom is prolonged exposure to hard water. Domestic water contains calcium salts, which leave an ugly yellow coating. Quite often, a bathtub can deteriorate due to old metal pipes, the water from which leaves traces of rust on the enamel.

An enamel bath often suffers due to untimely care. Remember that corrosion and limescale can strongly eat into the surface, and then you cannot do without it. On the other hand, aggressive cleaning can damage the surface of the plumbing, which will cost you a lot to restore. What means should be preferred to old bath shone white again?

We use household chemicals

Solving the problem of how to quickly wash the bath, many want to use the advertised chemicals, which promise to return the whiteness of plumbing after the first application. Today, supermarket shelves are literally littered with cleaning gels, powders, creams and pastes, so it's hard for a hostess to choose just one. Which of these really work, and which could be money thrown to the wind?

If you need to clean the rust of the bath, pay attention to the product called "Sanos". This liquid is great for strong dirt, but can damage the enamel, so it is suitable for use only in extreme cases.

Many housewives praise Cillit Bang, but this tool has a mild effect. To keep the bathtub always clean, it is recommended to use it at least once a week, and small dirt will not bother you.

Cleaning gels such as Comet and Ultra White will help remove stains on enamel. Domestos gel can also show good results, but this product has a strong smell of chlorine, so use it only in a ventilated area.

To clean the bath with special products should be as follows:

Wet the bath, then apply the product to the places of contamination.
Leave the gel or cream on the enamel for a while (usually it is indicated on the bottle).
After the time has elapsed, rinse off with warm water.
If cleaning does not bring the desired effect, repeat the procedure several times.

Be sure to protect your hands with rubber gloves when cleaning the tub. If the product is too aggressive and contains chlorine, ventilate the area or use a respirator. Please also note that the bath cannot be laundered, as they are more harsh and can scratch the fragile enamel of the bath.

Folk remedies will help

In search of a solution to the problem of how to wash an enameled bath, many turn to the proven recipes of our grandmothers for help. There are many reasons for this. Firstly, folk methods are much cheaper than store-bought products, and secondly, they are environmentally friendly and not so aggressive.

The most famous bath cleaner is ordinary soda. Pour the powder on the places of contamination, then carefully rub with a damp sponge. Baking soda is an excellent absorbent. It is able to pull stubborn dirt to the surface.

If the stains are too strong, after treating the bath with soda, after 15-20 minutes, apply vinegar mixed with chlorine bleach 1:1. Leave to act for another 40 minutes, and then rinse big amount water. This method allows you to quickly whiten the enamel, relieving it of unpleasant yellowness.

Vinegar will help answer the question of how to wash a cast-iron bath. Apply a little 9% acetic acid solution to the surface of the plumbing with a rag or damp sponge, leave until morning, and then rinse with warm water.

How can I clean the bath to make it shine? Citric acid will answer this question. For a complete cleaning of the bathroom, one package of the product is enough. Dissolve a lemon in a glass of water, then treat the surface of the plumbing with an acidic solution. Lemon acid perfectly fights yellowness, leaving no streaks on the enamel.

Turpentine will help get rid of rust spots and yellow streaks. Apply salt and a little turpentine to a damp sponge. Rub the product thoroughly into the stains until they begin to lighten. After that, rinse the bath with warm water, and the pungent odor can be removed with dishwashing detergent.

How to clean an acrylic bath? If not at hand, you can try to remove stains with non-aggressive home methods. The acrylic surface must not be treated with alcohol, gasoline or ammonia, as the bath can be permanently damaged. The use of washing powder will also lead to the formation of unaesthetic yellowness.

You can maintain the cleanliness of the acrylic bath with the help of liquid soap or gentle dishwashing detergent. Apply cleaners to a soft sponge or cloth and work the surface as it gets dirty. Wax polish, which is sold in many hardware stores, will help return the shine to the acrylic bathtub.

The enameled bathtub is highly wear-resistant, so abrasive substances can be used when cleaning it. However, you should not overdo it here either - hard iron brushes are not suitable for cleaning, as they will quickly spoil the enamel, and then it will be very expensive to restore it.

If the enamel bath is covered with rust, hydrochloric acid will help remove old stains. Gently apply it pointwise to the areas of contamination, and wash off after 15-20 minutes. Protect your skin when using hydrochloric acid.

The fight against limescale

How to wash the bath from limescale? This question is asked by many housewives, since hard water is a common problem in many cities. Getting rid of yellow stains on the bottom of the bathroom is almost impossible at home with regular cleaning. Do not despair - proven tools that are in every home will come to the rescue.

Helps fight limescale ammonia. Dissolve 20 ml of a pharmacy product in a glass of water, then spread it over the surface with a sponge and leave for 15 minutes. Rinse the surface with plenty of water, and the limescale will easily move away from the enamel. The ammonia has a pungent odor, so carry out manipulations in a ventilated area.

Coca-Cola will help remove limescale. Apply a small amount of fizzy drink to areas of contamination and leave to act for several hours. Rinse off the rest of the product, and you will notice how the bath acquires the desired cleanliness and shine. This is due to the fact that one of the components of Coca-Cola is phosphoric acid, which perfectly dissolves limescale.

Cleaning the bath from plaque can return the plumbing to perfect condition, if you follow a few rules. For surface treatment, it is not recommended to use substances such as alcohol, gasoline, acetone, chlorine or washing powder. For old dirt, it is not recommended to use metal brushes and wire dryers. They will damage the surface and will not bring the desired effect.

When cleaning the bath, take care to protect the skin of the hands and, in some cases, the respiratory tract. Turn on the ventilation or open a window when working with chlorine and acids. It may not be very convenient, but such precautions will protect against irritation and allergic reactions.

In order not to deal with strong old stains, do not neglect regular cleaning of the bath. Be sure to clean the surface of the plumbing with special products or get rid of dirt folk methods, and limescale will not settle on the bottom and walls. Rinse your tub thoroughly after each use. Do not be lazy to take care of plumbing, and it will serve you in excellent condition for many years.

A bath can lose its original beauty for various reasons. Affects long service life, quality tap water, its use is not only for its intended purpose, the lack of proper systematic care. Quite often, animals are bathed in the bath at home, washed, soaked, and bulky items are washed. In this case, aggressive agents are used that adversely affect the coating. There are many ways to give a damaged surface its former sparkling clean look. However, before you clean the bath, you need to determine:

type of coating of the inner surface of the bath;
what material it is made of;
type of pollution or damage.

Modern industry produces a huge range of bathtubs from the most different materials. These can be consumer goods or exclusive piece items. According to individual orders, bathtubs are made of glass and ceramics, wood and natural stone, cast marble and polymer concrete. These products are almost works of art, so they require special, special care.

But today we will talk about the products that are in almost every home. Bathtubs for a wide range of consumers are made from:

cast iron and steel with enamel coating;
acrylic is a polymer from which the entire bath can be made, as well as an acrylic insert for installation inside a steel or cast iron product;
kvarila - a material that has appeared on the plumbing market recently.

Quaryl is based on acrylic, supplemented with environmentally friendly polymer additives and quartz. These components give the material a truly unique performance. The surface of quaryl bathtubs is practically free of pores, so it does not need to be cleaned. It's easy enough to wash.

How not to wash and clean bathtubs

Before choosing a bath cleaner at home, let's go from the opposite. That is, we define what cannot be done categorically. The ban for all types of coatings and materials applies to:

Metal brushes, brushes, hard bristles. These items are sure to leave scratches invisible to the naked eye. In the future, under the influence of moisture, they will move into the category of cracks. And when their depth reaches the base material, restoration cannot be avoided.
Soaking laundry for a long time. As a rule, strong detergents are used for this purpose, which can destroy the coating.
Use for cleaning the bath of undiluted acids, alcohol, any solvents. Some owners use hydrochloric acid. It will clean any dirt instantly, but will also quickly “eat” the enamel.
Too sudden changes in temperature. Do not fill a heated bath with ice water.

Never use gasoline, acetone, chlorine-containing products, or products with abrasive particles to clean the bathtub. By following these simple rules, you will save it from global damage and significant damage. Otherwise, no household chemicals, and even more so home preparations, will not help. The container will not have to be cleaned, but restored or thrown away.

How to deal with various types of raids and stains

You can clean the bath at home different ways and means, including folk. First, let's talk about cleaning the enamel. The most common pollution:

Ordinary or everyday plaque forms after taking a bath. It consists of a soap solution filled with skin particles and human secretions. To clean it, it is enough to wash the surface well. hot water and a sponge or soft cloth. You can use light, non-aggressive detergents in the form of liquids and gels.
If cleaning is not performed every day, then soap deposits may accumulate on the surface of the bath. And when the water has increased hardness, then lime sediment will also be added to this. In this case, it is necessary to use acid-containing preparations. A saturated solution of citric acid, a mixture of vinegar and soda or borax will do. We apply the prepared composition to the stain or the entire surface, hold for 10-15 minutes and rinse with plenty of hot water.
Rusty smudges usually appear at the points of installation of taps and near the drain hole if the installation was carried out with a violation of the tightness of the joints. Such stains cannot be avoided with constant leakage of taps. In addition, water with a high iron content forms rust. You can clean the stains with ammonia and hydrogen peroxide, or lemon juice, as well as a mixture of table salt and vinegar.
Multi-colored spots appear as a result of careless handling of brilliant green, manganese, hair dyes. In this case, it is better to use special tools than to conduct experiments and violate the integrity of the coating. From folk remedies, solutions of hydrogen peroxide and lemons will help to wash the enamel coating. And brilliant green is best rubbed with diluted alcohol.
Baking soda or soda ash with vinegar will help get rid of yellowness. As well as bleach, if mixed with liquid soap.

However, all these methods are applicable only for those baths that are enameled in the factory using the appropriate technology. When the product has withstood restoration or is made in a handicraft way, then only gentle preparations should be used to clean the surface and the situation should not be started. Daily care is required.

Acrylic and quartz bathtubs are more whimsical, so you should take care of them constantly and carefully. Although dirt is easily removed from such a surface, since both types of products have an insignificant number of pores or none at all. It is strictly forbidden to use preparations containing acids, alkalis, alcohols, chlorine.

Everyday surface with a weak solution of ordinary detergent This is both care and prevention. If there are rusty or other stains, then try warm table vinegar with salt or turpentine. But first you need to test on an inconspicuous area of \u200b\u200bthe surface.

The industry has taken care to make it easier for housewives to care for expensive acrylic bathtubs. Use funds; Acrylan, Pani Vanna, SanKlin and others, then all problems with washing and cleaning will be solved and prevented.

(Visited 1 times, 1 visits today)

A snow-white bath is the pride of the hostess. Over time, on any surface, whether it be enamel or acrylic, limescale, ingrained dirt and rust appear. They not only spoil appearance the entire bathroom as a whole, but also create the basis for the development of bacteria. How and how to clean the bath quickly and efficiently? Consider the most effective and affordable ways.

Read this article:

Causes of the problem

The main reason for the appearance of yellowness and plaque on the surface of the bath is daily contact with water. It is intended for domestic purposes and contains salts and microorganisms, which, after evaporation of moisture, settle and eat into the surface. In advanced cases, you will have to make a lot of efforts to combat pollution and plaque, but everything is good in moderation. The enameled surface is easily scratched, so be careful with the force applied to the surface. Do not use hard metal brushes.

Cleaning methods without chemicals

The most effective bath cleaners can be found in any kitchen. These products do not cause allergies and are suitable for any surface. Acids are bad for the delicate skin of the hands.

Be sure to use rubber gloves.

soda and vinegar

Baking soda and vinegar will help clean your bathtub white. This cleaning takes place in two stages. First you need to apply a layer of soda on a damp surface and leave for about a quarter of an hour. Soda is a good absorbent. It draws out impurities from the enamel and whitens the surface, and also corrodes lime deposits.

On the first layer, after 15 minutes, apply a mixture of vinegar and bleach, mixed in equal proportions. After forty minutes, everything must be thoroughly washed off. This method is good for removing yellow plaque and lime, giving whiteness.

If the pollution is not strong, then only 9% vinegar can be used. It is ideal for cleaning cast iron bath. Moisten them with paper or rag napkins and cover the surface. Leave overnight and then rinse thoroughly with water.

Lemon acid

The first enemy of yellowness is citric acid. Wipe the surface of the bathtub with one sachet of the product dissolved in a glass of water and do not rinse for 30 minutes. The remaining stains are easily removed with soda. Citric acid is merciless to yellow plaque and rust, but absolutely safe for enamel.

Removing limescale

Limescale eats very deep into the surface, it is the most difficult to remove. But nothing is impossible! There are several effective means of combating this type of pollution:

Dissolve ammonia in water in a ratio of 3: 1 and thoroughly soak the plaque with it. Wash off the solution after half an hour along with limescale. It should be easily washed off with water. Otherwise, you will need to rub the surface with a brush with minimal effort.
Old plaque can be removed by mechanical action with a brush or sponge with the addition of a mixture of vinegar and ordinary salt (1: 1). It will take a lot of effort, but the result is worth it.
Citric acid or lemon juice will quickly dissolve limescale. The exposure time should be at least 15 minutes.

When choosing a product to clean the bath at home, remember that for different surfaces the same means and rules of care do not fit.

Removing rust

To remove yellow spots and rust, you will need turpentine. On a wet surface, apply a layer of salt and rub with a sponge dipped in turpentine. Wash the tub with water and any dish detergent.

Acrylic bath

Acrylic bathtubs are the most common. The surface does not withstand aggressive chemistry and quickly becomes unusable. When choosing cleaning products, exclude those that include alcohol, various acids and ammonia. Do not use washing powder, otherwise the bath will turn yellow and dull.

To care for the acrylic surface, you need to use liquid soap or dishwashing detergent. Use a soft sponge or cloth. Regular waxing will greatly extend the life of your bath and improve its appearance.

Enamel bath

Enamel is considered more wear-resistant. With timely cleaning, there will be no problems with it.

Do not use products with acids and chlorine in the composition.

Enamel quickly loses its luster from their exposure. Use a soft sponge to clean the enamelled tub. An iron brush scratches the surface, leading to further destruction of the coating.

Removing rust is much more difficult than preventing it. Places where it is just beginning to appear, treat with a technical solution of hydrochloric acid and wash off after 20 minutes. Avoid contact with skin and chrome parts!

Household chemicals for cleaning the bath

New household chemicals will help to wash the bath to white and properly care for it. These products are quite safe and effective, do not destroy the surface and give it a shine. They have passed numerous laboratory tests and safety tests.

The use of household chemicals eliminates the need for additional manipulations for mixing or diluting in water. They are immediately ready for use. You also do not need much effort in order to wipe off stains and plaque.

Carefully study the composition of the product and choose the one that is suitable for the surface of your bath. Detailed information is indicated on the label, so it is difficult to miss buying household chemicals. Gels or sprays are best for cleaning the bath.

The most common means: Cillit Bang, Comet, Cif, Domestos, San Klin, Pemolux.

Bath Care Rules

It's easier to prevent problems than to spend a lot of effort fighting them. The bathtub will last you much longer, keeping its appearance for many years. You only need to follow a few rules:

Wash your tub regularly with regular liquid soap and a sponge. This procedure will prevent the formation of limescale and prevent yellowing of the surface and the growth of bacteria.
Get in the habit of wiping down the tub and sink after use with a dry cloth. All the problems that arise are connected precisely with the contact of the surface with water.

By following these rules, you will save yourself from unnecessary problems and become the owner of a brilliant and beautiful bath that will serve your family for years to come!

Despite the many modern alternatives, the cast iron bath has been and remains one of the most sought after types of plumbing fixtures.

In many ways, this popularity is due to the durability and increased strength of cast iron. The material can withstand severe loads, is resistant to temperature changes, has a high heat capacity and good sound insulation properties.

However, the operation of such products has its own nuances, which mainly relate to the handling of the enamel coating. In the absence of proper care and prevention, it quickly loses its aesthetic appearance.

Enamel is a powder that is applied to the inner surface of a cast-iron bath container by applying the electrostatic method and subsequent “baking” in a special heat chamber.

And although cast iron itself serves from 25 to 50 years without problems, the enameled coating is much more sensitive to all kinds of external factors. That is why it needs careful and proper care.

Enamel is especially exposed to several types of pollution:

Rust.
Lime scale.
Fat layers.

The reason for the appearance of ugly brown smudges on white enamel is often iron salts, which constantly fall on the surface from old pipes. Sometimes the problem lies in a faulty leaking faucet, a metal chain for attaching the exhaust cap, which oxidizes when exposed to water.

As part of the enamel used in old cast iron baths, zirconium elements are usually present. They increase the strength, elasticity and heat resistance of the material, but are not able to resist rust. On such bowls, microcracks and scratches inevitably appear over time, through which corrosion acts directly on the metal.

The surface of a neglected cast-iron bathtub, which has ceased to shine and has become covered with numerous scratches, can be revived by polishing. This procedure refreshes the appearance of the enamel well.

Polishing works are carried out in the following order:

the surface is cleaned of contaminants by one of the methods proposed above;
the clean coating is rinsed and wiped with a dry cloth;
a special composition is applied to the enamel, designed for polishing paintwork surfaces, for example, car polish;
the coating is polished, preferably using grinder with a soft nozzle or manually with a microfiber cloth.

After the surface of the bath begins to shine, it is necessary to rinse it and wipe it dry.

You need to understand that only a new layer of enamel can return the product to its impeccable original appearance. But if you regularly care for the coating and do not place objects inside that can damage the enamel layer, then the bath will look perfect for ten or more years.

Conclusions and useful video on the topic

Video instructions for cleaning the bath at home using various improvised means:

Any kind of dirt that appears on the enamel coating of the cast iron bath during operation can be removed household chemicals or folk remedies. The most important thing is to prevent advanced cases, clean the bowl in time, and devote time to the prevention of stubborn dirt.

If none of the proposed means and cleaning methods helps to get rid of the problem, it is better to contact specialists. They will carry out a professional complex surface treatment and cover it fresh, after which the bath will be almost like new.

Perhaps you know others effective ways cleaning a cast-iron bathtub from plaque? Please tell the visitors of our site about them. Leave your comments, share your experience, ask questions in the block below.