Detergent bottle. Crafts from plastic bottles - creative ideas for garden and home design (100 photos). Containers for cosmetics

Learn how to make beads with your own hands from different materials- wool, beads, leather, paper, and even T-shirts. And to help you - master classes and 53 photos!

How to make beads with your own hands from wool?

Felting technique is interesting and amazing. See what a beautiful decoration you can make with it. These beads are like rolls. Let others guess what these accessories are made of, and you do not immediately reveal the secret to them.

At first, only you will know what you need to make them:

• wool of various shades;
• bubble wrap;
• rubber mat;
• stationery knife;
• bamboo mat;
• small towel;
• mesh.

The presented technique allows you not to throw away the pieces of wool left from needlework, but to put them into action.

Pinch off small strands, arrange them evenly in one row. Pick by color scheme. For example, first lay lilac, blue, blue wool, then green, yellow, orange, red.

This blank canvas should have a size of 30x22cm.

The red stripe will be on the edge, it is slightly wider than the others, and why, you will learn about this a little later. In the meantime, we continue to make beads - an ornament that looks extraordinary.

Cover the resulting workpiece with a mesh, sprinkle with prepared soapy water, rub it with your hands.

Lay a thin layer of white wool on top, slightly stepping back from the edge. It will help separate the layers. To do this, you can use not only this, but also brown, black wool.

Cover the resulting workpiece with a mesh, sprinkle with water from a spray bottle, slightly press it with your hands. Cover with a pimpled film, wipe again through the mesh so that the layers are well attached to each other.

Wrap the resulting canvas with a roll.

It's time to reveal the secret of why we did not cover the red wool with white. When you rolled the canvas into a roll, a comma-like figure formed inside it.

Now you need to wrap the resulting "sausage" in a perforated film. Be patient, as this blank needs to be rolled for about 5 minutes. Then all the layers will adhere well to each other.

Remove the film, now you need to roll this blank on a rubber mat. Don't forget to seal the edges too. They should be conical. To do this, in the process of work, these parts need to be slightly pinched.

Wrap the resulting sausage in a terry towel, continue to compact it, rolling it already in the towel. To make it even denser, wrap it in a mat and roll it for another half an hour.

Now you can get this blank, rinse it well in warm water, then leave it to dry completely.

To avoid the smell of mustiness, you need to dry the felt in a warm, ventilated place. It is advisable to first thoroughly blot the workpiece with a towel.

When this part is completely dry, the fun begins. Take a stationery knife with a new sharp blade, chop this blank into circles 1 cm thick.

These are such beautiful rolls you get. It is good that some of them are of different sizes, when assembling the product it will be possible to place larger elements in the center, and small ones at the edges.

If you liked creating jewelry beads, then you can look at another interesting way that will allow you to get a different color scheme.

To do this, you will need wool in yellow, orange and red.

Lay a piece of this wool on your work surface. Moisten with soapy water, place a pimply film on top. Grind the workpiece, wrap it with a roll. Then proceed in the same way as in the first master class.

You can experiment with colors, make beads from wool of various textures and colors.

How to make beads from beads?

The next master class will help you create just such an airy decoration.

To make a necklace, you will need:

• fishing line;
• beads;
• hook;
• scissors;
• clasp.

Manufacturing sequence:

1. The decoration is very simple. First you need to string the beads on the fishing line. Then the resulting "thread" must be knitted, making a chain of air loops. But the loops are not the same. Some consist of 3-4 beads, others are empty (without beads), contain only a fragment of fishing line.
2. After you knit the entire fragment, finish shaping this blank by knitting 5 loops of fishing line at the end. Finish securing this piece by tying a knot here.
3. In the same way, make at least 10 elements, making each new component of the beads 5 mm longer than the previous one. It remains to thread all the ends of the lines into one fastener, fix them here.

To make the following beads from beads, the scheme will help.

Taking a thin wire, you need to string beads on it, form a flower frame from them, consisting of a core and four petals. Then, in the center of each petal, you need to fix a larger bead.

Make several of these blanks, fasten them together. This is the first row of the necklace. To create the second one, you need to make hanging loops from small and large beads. At the end of the process, attach the clasp.

The following bead weaving pattern will help you create similar ones. See how to make flowers from six beads by stringing them on a wire. Then twist it and put on the same number of beads here.

Then a third is added to these two petals, and so on. In total, this flower consists of six petals and a core. You need to complete several elements to get a necklace around your neck that will fit you. In conclusion, columns are created from beads on both sides. A fastener is put on the ends of the wire or fishing line, fixed.

And here are some other beaded beads you can make by taking elements of two colors.

Such neck jewelry can be created from the most unexpected things. Proof of this is the next master class.

How to make beads with your own hands from a T-shirt?

Such knitwear is just a storehouse useful ideas. To make beads, take:

• T-shirt
• metal ring;
• threads;
• needle.

If you are tired of the T-shirt or have become old, cut it into strips 2-3 cm wide and start creating.

If you need to lengthen the elements, you need to connect the ends of the two strips and sew them by hand or on a sewing machine.

Let's get down to some interesting work. Form a loop from each strip, attach it to the ringlet. It is necessary to braid it all with these elements so that the ring is not visible. To do this, attach the strips close to each other.

See what you get - front and back view.

If the ring is in front, then throw the ends of the ribbons over your shoulder and decorate them here by weaving two pigtails. Tie the rest of the ribbons, fix with a hair clip.

You can use not only a T-shirt, but also other things that are out of fashion and unnecessarily take up space in the closet. Cut them into strips and tie them to the ring.

And here's how to make beads from a T-shirt so that they are very elegant. Also cut it into strips. String a few large beads on each. Sew the strips so that the seam is at the back. Close it with a fragment cut out of a T-shirt. The photo shows how to make such beads.

They can be made from an unnecessary thing by decorating it in a certain way.

Cut out the triangle with ties right away or sew them on later. It remains to sew on beads or glue artificial pebbles and you can try on jewelry. Do not throw away the remaining pieces of leather from the needlework, take this material instead of the base.

How to make a necklace from various materials - a master class

An original decoration can be created from the most unexpected materials.

From metal circles

To make the next necklace you will need:

• metal mugs;
• ribbon;
• scissors.

Pass in the first metal blank place one ribbon, the second circle over the data and thread both ends of the ribbon into this detail.

Shade the ribbon. Pass the second tip as shown in the next photo to secure these two parts of the necklace.

Using this technology, attach the remaining elements, making the beads according to your size.

It remains to attach the clasp and try on a new decoration. If it is not a necklace, but beads of sufficient size, then you can not make a clasp, but put them on over your head.

Suede and rhinestones

How to make another necklace, the master class will show and tell. It is made in an interesting mosaic technique.

To create this, take:

• broken brooches, rhinestones;
• suede;
• fishing line;
• lining fabric;
• interlining;
• ribbon to match the fabric;
• threads.

Cut out the blank from suede. Lay out the remnants of jewelry and other jewelry you have on its front side. First, sew the largest ones using fishing line and thread, then place the smaller ones between them, also fasten them.

Trim the excess suede with nail scissors, leaving 3 mm of this material on the edges.

Glue interlining to the wrong side of the lining fabric, then glue this part to the main one.

Insert on one and the other side of the ribbon. Sew them on and stitch the edges of the product with small stitches.

If you didn’t have enough beads to decorate the necklace, then you can paint the plastic elements, buttons, shells with hairspray and use them.

From plastic bottles

This is very interesting option making jewelry from waste containers.

To make this type of decoration, you will need:

• plastic bottles, caps from them;
• metal knitting needles;
• scissors;
• buttons;
• hole puncher;
• dye;
• embroidery threads;
• building hair dryer;
• drill.

Use acrylic paint intended for plastic surgery. Apply it in several layers with a cosmetic sponge.

At plastic bottles cut the bottom, give these parts the shape of petals. Bring the blanks to the building hair dryer, heat them up so that they take the form of flowers. If you do not have such a device, hold the plastic parts over the flame for a few seconds. Then paint them in the desired color.

Cut out leaves from bottles, paint them in green color. On each such element, make a hole with a hole punch or awl.

Make daisies out of white caps by cutting out their petals with a knife. Hold them near the included building hair dryer so that the petals bend and take desired shape. Make a hole in the center of each daisy with a drill. Color the cores yellow.

String flowers from plastic bottles, daisies from caps and leaves from bottles on metal knitting needles so that you get a beautiful necklace or beads.

From paper

From this cheap material you can create very beautiful beads.

To do this, see the following diagram. As you can see, after cutting the strips of paper in a certain way, you need to roll them up, and you will get beads of various shapes.

For the first type of such blanks, you need to cut an elongated triangle, for the second, this triangle must be beveled. For the third, a strip with a narrowed end is cut out. The fourth is a wide strip, the 5th is narrow, the 6th is even narrower. Cut out the seventh and eighth element in an interesting way. First you need to make a fairly wide strip. For the seventh bead, stepping back a little from the top, you need to make a horizontal slot here. Further - from the left point, an oblique line is cut to the left, and from the right - to the right.

Let's look at an example of how to make paper beads. Cut the leaf into long, narrow triangles. Take the first one, wrap it around a wooden stick or a toothpick. Remove from it, you will get such a blank.

You need to make several of them.

Now connect the beads to get the original necklace. These skills will come in handy when you make another unusual piece of jewelry.

From pins

Make beads in the same way from paper strips. But do not close them yet, but wind each strip directly onto a specific pin. To make the necklace double-sided, wind a paper strip on each side of one pin.

Now you need to string the pins on a strong thread, thin elastic band or soft wire and decorate the necklace.

From shoelaces

The next decoration will turn out no less original.

To make it, you will need:

• laces of different colors;
• needle and thread;
• beads;
• glass pebbles;
• glue.

If you have a strip of thin beads, just sew them to the cord. If there is a scattering of beads, then they need to be taken here one at a time.

Sew the laces together to make a fairly wide strip of necklace. Glue the pebbles, sew on the clasp.

These are the beads you can make with your own hands from the most ordinary materials, but the jewelry will turn out to be extraordinary. If you are interested in this topic, see how to make beads with your own hands from fabric:

And here is how to make a necklace of crystals and beads:

Beads will never go out of fashion - this has already been proven by time. If earlier the beads were mostly made of natural stones or plastics, then today they are not made from anything. And modern craftsmen manage to make such beauty with their own hands from improvised materials that you simply marvel. Let's and we will find out how to make beads ourselves, but such that it was not a shame to wear.

First of all, think about how you imagine your beads. In this case, numerous sites on this topic will help you, and it will not be superfluous to go to a fashion jewelry store and look for a couple of samples for yourself. By the way, here is one of the interesting sites where you can choose several options for beads for a sample. Review your wardrobe and decide what kind of clothes you want the beads to go with and whether they will fit. Thanks to the chosen clothes, its style and color scheme, you will already be able to decide on the color, size and style of the desired jewelry. The most uncomplicated material for making beads is purchased beads, multi-colored beads, fishing line, leather cords and various accessories. You just need to come to the needlework store and choose the varieties of beads you like. The seller will help you determine the required quantity and tell you what material you still need. That's all, it remains to string the beads on a thread according to the planned pattern, attach the purchased accessories and do the most pleasant thing - fitting.

If you want to make something unusual and creative so that your jewelry attracts attention and surprises your friends, we suggest you make summer-like bright beads from polymer clay or salt dough. If for the manufacture of jewelry from polymer clay you have to spend a little money on the purchase of the clay itself, varnish, and accessories, then almost everything for a salt dough product can be found at home. The process itself is very exciting. Thanks to these methods, it will be possible to make whole sets of jewelry, which will also include earrings with a bracelet.

Having a little free time and a great desire to create something magical, you can make unique beads with your own hands, not only for yourself, but also as a gift.

History knows cases when gold was given for beads, people into slavery, expensive furs and even land! This is not surprising, because in ancient times, beads were endowed with many symbolic, and sometimes even mystical meanings. They were used as a talisman, personifying luxury, power and wealth, and used in witchcraft. They were treated for various diseases, and used as currency.

And only since the Middle Ages, beads acquired the status of an independent decoration. Fashionistas and fashionistas began to wear them for celebrations, and after a couple of centuries, beads became the subject of a daily wardrobe. Almost every stylish woman has beads these days.

But what if you want to have this beautiful accessory, namely those that you want are nowhere to be found and perhaps they don’t even exist, or their price is still equal to a bar of gold? There is a way out - make the beads yourself!

To date, there are many resources where you can find diagrams that will show step by step manufacturing beads with your own hands.

Books, magazines, publics and websites on the Internet - all this gives scope to the imagination, inspires and makes it possible to create your own unique design.

What kind of beads can be made?

Beads, pearls, amber, clay, stones, wood, glass, polymer clay, everything is used, and even sand! But before you choose the material, you need to decide on the theme of the accessory.

Yes, for marine style shells, stones, glass, amber are better suited. There is nothing better than pearl beads for going out. For everyday outfits, you can use beads made of felt, wood, clay, beads.

We will consider several options for making beads. Below will be a photo instruction on how to assemble beads from beads.

Beads are an easily accessible material that is also easy to work with. So what you need to make:

• thread (or thin fishing line)
• fittings
• needle
• beads

Also, in addition to beads, almost any additional elements which you want.

Measure the thread or fishing line of the desired length (calculate a small distance to secure the fittings at the ends of the thread). Thread a thread or fishing line into a needle of a suitable size. Pay attention to the fact that not only the eye of the needle should be comparable in size to the thread, but also that the width of the needle and its tip should be narrower than the holes in the beads.

String beads on the thread with a needle in the order you want. When all the beads are on the thread, remove the needle and fasten the accessories to the ends of the thread. Or you can tie two threads into one knot (if you have a long thread, or you use a stretching fishing line, or an elastic band). Your beads are ready!

You can also use a thread with beads strung on it as a working thread for crochet. In such cases, very beautiful openwork beads, collars or necklaces are obtained. Experiment and you will be surprised to see what unique decorations are obtained from ordinary beads!

On the Internet, you can see a master class on how to make beads from beads just in the form of an openwork necklace.

Polymer clay beads

Polymer clay is good because it can be molded into almost any shape. In addition, as a rule, polymer clay is painted in a very bright colors, which will make the beads a noticeable element in your outfit.

You will need:

• polymer clay
• awl (or thick needle, toothpick)
• needle for threading beads
• fittings for fixing the ends of the thread
• oven

Make blanks for beads from polymer clay. Use your imagination! Balls, stars, rhombuses, squares, hearts - any shape that can be pierced to thread a thread into it.

Do it carefully in each workpiece through hole. Try to maintain the originally conceived shape, as the clay may crumple during the piercing process. Bake your beads in the oven according to the instructions.

By the same principle as in the “beaded beads”, thread the thread into the needle and string the cooled beads on it. Fasten the ends of the thread with accessories.

Fabric beads

A huge variety of fabrics will allow you to create beads for each of your outfits.

What you need to make:

• Fabric (the desired length of the beads is doubled; scraps of fabric can be used)
• Thread for sewing on fabric for future beads and a needle
• Foam blanks (you can use any shape, you can use cotton wool or stuffing for pillows instead of foam blanks)
• Crochet hook
• accessories

Measure on the fabric the length of the desired beads. Draw a rectangle from it. Calculate the height based on the workpiece, which will be filled with beads.

If you have a foam blank, then you need to attach it to the edge of your line of the desired length, and bend the fabric so that both of its edges touch, and the blank is inside this "pipe". Fold the fabric back, measure the height, and add 1 cm for sewing the edge.

Cut out the measured rectangle. Fold it in half, and stepping back 1 cm from the edge, sew on a typewriter or manually from the wrong side with a regular running stitch, from beginning to end, the entire strip of fabric. You should get a through "pipe" of fabric.

If you sewed by hand, then before you tie a knot at the end, pull the needle inside the "pipe" and turn it inside out, right side out. If you sewed on a typewriter, then use a pin.

After you have turned the "pipe" inside out, you can fill it with blanks. Start from the very edge, so it will be more convenient for you to distribute the blanks.

After inserting one blank from the very edge, sew it on both sides so that the blank is in a separate cell. Continue like this, inserting blanks with a hook or any other object that is convenient for you. Sew all the blanks so that they are each in its own cell.

Insert and sew the last blank. Secure the ends with hardware. Designer beads are ready!

Beads, like any accessory, are subject to fashion influences. Therefore, you can create and wear beads from different materials, because some of them will always be in trend.

DIY beads photo

Adding a twist to your style is quite simple - it is important to use the right accessories. Handmade jewelry is sure to emphasize femininity and attract attention. Due to their uniqueness, they have a special charm and always remain in trend.

Pearl beads

Necessary materials:

• 50-60 pearl beads;
• silk threads;
• needle;
• carabiner with clasp;
• 2 end caps for attaching a clasp.

Beads are made in knot technique. You can, of course, just string beads on a thread, but there are 2 reasons to make a product using this technique.

1. The knots keep the beads from rubbing, thereby maintaining their luster.
2. Reliability. Even if the beads break, most of the pearls will remain in place and will not be lost.

To secure the trailer, pass the needle into the middle of the device and make a knot, then make another knot on top of it, close the device and start stringing pearls. This last knot is important, otherwise the extreme pearl will rub against the metal clasp.

To ensure that the knots after each pearl lie back to back, you can use silk threads, a large needle or an awl, this will help move the knot to the right place to tie there. It is problematic to do this with ordinary threads, they do not slip and are inferior in strength.

When all the pearls are strung, it remains to put on the second limit switch. To do this, pass the needle through the back of the device and tie a double knot.

To attach the carabiner, you will need round-nose pliers.

Beaded beads

Necessary materials:

• several types of beads;
• beads of different sizes;
• spool of fishing line;
• crochet hook;
• 40 sewing pins;
• 2 spiral limit switches;
• lock for jewelry;
• sheet of cardboard.

The more types of beads and beads of different sizes you can pick up, the more interesting the beads will look.

Collect the beads on the fishing line as you like. Do not cut the line from the reel. You need to fill in about 5 meters of fishing line.

When the fishing line is full, step back 15 centimeters from its beginning, take a crochet hook and knit a chain with air loops, while making sure that 1 bead fits into each loop, as shown in the photo.

Behind the last knitted loop, you need to tie a knot, after it, step back 15 centimeters and cut the fishing line.

At the next stage, the formation of a multi-level decoration begins. Pin 2 pins to a sheet of cardboard. The distance between the pins will be equal to the desired length of the beads. Stick the remaining pins in pairs under the first ones, all the time, slightly increasing the distance between them, as shown in the photo.

You will get about 16-20 rows in the shape of a trapezoid. Distribute them evenly. Where the air loops are in contact with the pins, you need to put them on, not the pins. It is not necessary to pull the fishing line, a smooth sagging should remain.

The air loops on the right should be collected from the pins on the hook. Through these loops it is necessary to stretch one of the "tails" left on the edge of the fishing line. Put a trailer and the corresponding part of the lock on it, tie a knot and melt it with a lighter.

Do the same with the air loops on the left.

Amber beads

• 3 types satin ribbons 5, 2.5 and 1.5 centimeters wide;
• amber beads;
• 2 decorative rings;
• 6 clamps;
• cabochon;
• jewelry cable;
• needle and thread;
• lighter;
• scissors;
• pliers.

Using the latch, fix the decorative ring on a piece of jewelry cable.

String beads of the desired length on the cable and fix the free edge of the cable on the second ring with another clamp. Run the second and third row of beads in the same way, but slightly shortening each subsequent row so that the tiers lie beautifully.

From a tape of greater and medium width, 7 and 6 strips are cut, respectively. The length of the segments is determined taking into account the splendor of the future flower: the longer the pieces, the more magnificent the decorative element will turn out.

With a needle and thread matching the ribbons, alternately string the pieces of ribbons folded in half. Start with the big ones, end with the smaller ones.

Tighten the thread so that the "petals" are tightly pressed against each other, and roll the blank into a flower shape.

Secure the flower with a couple of stitches, and decorate its middle with a cabochon.

Sew a flower to one of the decorative rings. From a thin ribbon, measure 2 strips of the same length, they will become strings for beads. Pass them through the rings, fold in half and tie at the back of the neck.

Beads from threads and beads

Required materials and tools:

• a set of identical beads;
• chain with large links;
• ribbon;
• yarn or floss threads;
• scissors, needle.

Wrap yarn around the back of a chair.

Having formed the winding of the required thickness, cut it from one end, while holding it behind the other so as not to crumble.

Having determined the middle, fix this place with a thread of the same color as the resulting “tail”. Divide it into 3 equal parts and weave into a tight braid.

Having obtained the desired length, shape the edges of the braid: make a dressing of the same thickness, and cut off the excess, ensuring that the free ends are the same in size.

With a needle and thread to match the braid, sew the weave with a chain.

Sew beads along the front edge of the braid in equal segments.

Instead of a lock, attach half of the ribbon to the chain on its extreme links with a hidden seam.

Chanel style beads

Required materials and tools:

• beads with a diameter of 14 millimeters - any quantity;
• pins 3 centimeters long by the number of beads;
• chain with large links;
• carabiner clasp;
• a pair of connecting rings;
• transparent beads;
• pliers, side cutters and round nose pliers.

String beads on each pin (stud), then a bead.

Having determined the desired length of the jewelry, cut off the chain. Pass the leg of the pin with the bead into the link of the chain and bend it with round-nose pliers in the form of a loop.

Attach several beads to each link of the chain (the number depends on the size of the link and the beads themselves). Having achieved the desired splendor of the decor, put on the details of the carabiner on the edges of the chain, using the rings as connecting elements.

Textile beads in African style

Required materials and tools:

• satin cords;
• waxed cords;
• a dozen separating beads;
• carbine;
• a pair of connecting rings;
• a pair of limit switches;
• scissors;
• glue.

From the cords (waxed, satin, soutache are suitable), prepare the base by folding the segments one to one. The thickness of the blank is determined taking into account the diameter of the separating beads.

With thinner cords of a contrasting color, tightly wrap equal intervals of the base base, carefully closing the ends under the winding layer. The beginning and end of the "insert" should be decorated by gluing separating beads.

Decorate the edges of the necklace with caps. Then attach parts of a miniature carabiner on the rings.

Necklace made of yarn and chains

Required materials and tools:

• chain;
• yarn 3 colors;
• scissors;
• side cutter

Take 2 unequal parts of a metal chain. You can connect them into one whole by fixing the ends of the shorter part to the edges of the longer one. Fixing with a thread or previously removed links.

From each skein of yarn, cut 3 threads 2 meters long. Knot the threads of the same colors from one end. Fasten the edges of the threads in the area where the chain segments are connected.

Weave a pigtail out of the threads, thread the extreme threads into the links of the chain so that both the metal and the soft component of the decoration form a beautiful braided crescent.

Having finished with the design of the chains, the remaining ponytails are woven into a pigtail of the desired length. The same pigtail is made from the other edge of the decoration.

Beads "Rainbow"

Required materials and tools:

• 2 clamps;
• toggle lock;
• colored beads 8 millimeters;
• yellow beads 10 millimeters;
• jewelry cable - 4 meters;
• side cutters;
• flat cutters.

Weaving pattern:

Fold a two-meter piece of cable in half, thread it through the ring from the toggle lock and fix it with a clip. Weave beads from colored beads, as shown in the diagram, it is important to observe the color sequence of the elements.

Having achieved desired length, fasten the cable according to the following algorithm: put on the latch, insert the edges of the cable into the ring of the second part of the lock, insert the tails into the latch. Clamp with pliers, and hide the edges of the cable inside the beads, cut off the rest.

To increase the beads by a couple of rows, you will need orange and yellow beads and the remaining length of the cable (2 meters). Having folded the cable in half, place an orange bead in its middle. Insert one end of the cable into the green bead on the decoration, and on the second end, first put on the yellow and then the orange beads. Insert the 2 ends of the cable inside the orange one and pull it up. The algorithm is repeated until the end of the necklace.

Fix the edges of the cable with a double knot, then pass them under a row of beads in a necklace and cut them off.

Beads "Blackberry"

Required materials and tools:

• beads 4 mm - 134 pieces;
• chain;
• pins with eyelets - 2 pieces;
• carbine;
• connecting ring;
• thin wire or fishing line;
• pliers, side cutters, round nose pliers.

First you need to make blanks from beads. Having fixed 12 beads on a wire according to the scheme, a berry blank is obtained. It is important to remember that the first bead in the workpiece is also the final one. Such blanks will need 11 pieces.

From a pin and a bead, a blank is made with 2 loops around the edges. You need 2 such parts. The chain is divided into 3 parts.

From one end of the chain you need to attach a bead with eyelets, and on the free edge - string all the "blackberry". After, if necessary, cut off the excess length of the chain and connect its edge with the loop of the second bead with a pin. The outer beads became fixators for the immobility of the central pattern.

Attach chains to free loops with the corresponding carabiner elements at the end.

Beads "Turquoise bouquet"

Required materials and tools:

• turquoise beads;
• black beads with a diameter of 6 millimeters;
• metal beads with a diameter of 3 mm;
• clamps;
• carbine;
• wire;
• connecting rings;
• round-nose pliers, side cutters, pliers.

Bend a meter piece of wire in half, fix it with a retainer on the connecting ring, decorate with a metal bead.

Put 3 turquoise beads on the ends of the wire, then cross the ends through the black bead. Repeat the algorithm, only at the next crossover of the wire, put on a metal bead instead of a black one. Next, put on 1 metal bead on each edge of the wire and connect the ends with the same bead. A pattern appeared. Repeating similar steps, weave the decoration of the desired length.

At the edge of the product, make a loop, as at the beginning of weaving. To the loops with the help of connecting rings, fasten the elements of the carabiner.