Can be made from water pipes. Do-it-yourself pvc pipe products for summer cottages. Do-it-yourself furniture made from PVC pipes

With skill and a rich imagination, interesting and useful things can be made from any materials at hand, including plastic pipes.

plastic pipes different diameter sold at any hardware store for quite affordable prices. They are used in plumbing, sewerage, heating, irrigation systems, and after construction or repair, unnecessary trimming often clogs the site, while it can serve as an excellent material for creative crafts.

Do not rush to take construction waste to the landfill - we will tell you what can be done from a plastic pipe to turn excess residue into beautiful and functional interior items.

We will not talk about the direct purpose of the product, but about the convenience of using varieties of plastic pipes precisely as a material for crafts. Plastic pipes are light weight, strong and durable enough. They are resistant to dirt, do not collect dust and are easy to clean. Products made of plastic pipes are safe to use even by small children (they do not break, do not have a heavy weight, do not emit toxins).

For creative works PVC pipes are more often used, which are quite rigid and easily connected with special nozzles and "adapters", allowing you to get collapsible structures. Polypropylene pipes can also be used, but their connection will require a special welding machine or compression fittings, and finished products can no longer be disassembled.

Methods for connecting pipes in structures

From plastic pipes, you can make not only convenient household items, but also pieces of furniture. In order for such a home-made product to last a long time and be reliable in operation, care must be taken to properly connect the individual segments. Since about the connection polypropylene pipes has already been said, consider docking only pvc pipes.

PVC plastic pipes can be connected in the following ways:

in a bell with a rubber seal;
with the help of an adhesive composition;
bolts by drilling holes.

The first connection method is characterized by simplicity, but insufficient rigidity. Before connecting, it is recommended to clean the internal and external surfaces of the pipes at the joint from dust particles and treat the inserted part of the pipe with silicone grease. First, the pipe is inserted into the socket until it stops, after which it is carefully pulled back by 0.7 - 1 cm. The structures assembled in this way can later be dismantled, which is convenient for seasonal products.

The second method of assembling pipes is distinguished by reliable fixation and greater labor intensity. Work on connecting parts begins with the processing of the mating surfaces of the socket and pipe with sandpaper for better adhesion. Then they must be degreased with methylene chloride. Adhesive composition applied along the entire length of the prepared outer surface of the pipe and 2/3 of the length of the inner surface of the socket. Finally, the pipe is inserted into the socket until it stops and rotated a quarter of a turn. For gluing, it is required to press the parts for 1 minute. For good fixation, all operations to connect two segments must be carried out quickly enough. The connected elements are left for several hours until the adhesive composition dries completely.

The third method is more time consuming, as it requires marking and preparing holes, but allows you to get collapsible structures with a reliable connection.

For corner joints and connecting several segments at once in one node, it is convenient to use a variety of fittings. Plastic pipe structures can be of any complexity using numerous tees and fittings. Consider useful homemade in ascending order of complexity.

Original and functional little things for decorating the interior

Our review of interesting ideas is opened by the simplest products from a plastic pipe, which even novice masters of homemade art can make. In addition, such crafts require a minimum amount of material, and in some cases even the shortest trimmings can be used.

From scraps of pipes of large and medium diameter, you can make a convenient and practical organizer for your office or workshop.

There are two options available here:

fastening with self-tapping screws to a wall or table, for which one end of the segment is cut off at an angle - a stationary option;
gluing the segments together to form a stable figure is a portable option.

The segments can be left white or gray, or you can paint it in your favorite color. Such an organizer is indispensable for schoolchildren and people involved in creativity and needlework. With him, everything will always be at hand, and on the table - the perfect order.

Additional comfort on the desktop will be provided by a drawing tablet and a laptop stand, which can be made from small-diameter polypropylene pipes.

Bookshelves are a special element of the interior. Their presence in a certain way characterizes the landlord. High-tech style corner shelf will not go unnoticed.

From numerous short cuts of different diameters, you can make a patterned frame for a mirror or photograph. It is enough to glue the cut rings according to a pre-prepared layout, which can be applied to a sheet of cardboard. It can be floral patterns or something abstract. The dimensions of the frame will depend on the amount of suitable material.

Large diameter scraps can be used to create a comfortable shoe rack with multiple compartments. This design will not take up much space in the corridor and will ensure proper storage of shoes and a quick search for the right pair. The elements are connected using glue or self-tapping screws. To fix the shelf on the wall, you can use a plywood sheet, to which the assembled shelf is first glued.

Some crafts made from PVC pipes will really appeal to lovers of fresh flowers. A reliable flower stand is simple in execution and looks pretty.

For manufacturing flower pots small prunings are well suited for transplanting or breeding pets sewer pipes. Having shown imagination, such pots can be decorated with colored paper, paint or bright stickers.

It is easy to make a stylish vase for artificial flowers and dried flowers from elongated cylinders of medium diameter. If you approach the implementation of this idea creatively, then it may turn out original gift for a significant event.

Another extraordinary idea for the interior is homemade techno-style lamps. There are a lot of execution options, but they all adhere to the principle of minimalism: no unnecessary details.

With the help of unused scraps, you can also make useful things in the hallway or corridor: a hanger for clothes and bags and a holder for garbage bags.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developmental rug, an arena, a swing, a sled, a football goal, playhouse, outdoor shower and theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest. The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. Home theater develops the creative abilities of children and creates good conditions for a fun time.

We update the interior economically: furniture made of plastic pipes

Crafts from plastic pipes with their own hands can occupy a key place in the interior. Craftsmen share many extraordinary solutions that can save a lot family budget. Let's highlight the brightest of them.

The most common and sought after piece of furniture is a chair. Using pieces of plastic pipes and connecting elements, you can make high-quality chairs different types: for children, folding for hiking and fishing, armchairs and even highchairs for feeding.

Having mastered the assembly technique a little, you can proceed to more complex structures. A neat bunk bed made of polypropylene pipes is a good alternative for country house or cottages, when buying a ready-made crib is too expensive. Moreover, when the kids grow up, the material can be used to make other useful crafts.

Glass Coffee table with a PVC pipe base in the next photo can hardly be called an amateur homemade product, because it looks like a design work.

Another original idea is a shelving unit for a hallway or living room. Having independently designed a rack with the right number of shelves of the required size, you can not waste time shopping in search of something suitable.

Useful crafts for a country house and a summer residence

Unused and superfluous building materials will definitely find application in the summer cottage. Crafts from plastic pipes for summer cottages will make it much easier garden work, will make the rest more comfortable and help to avoid high material costs. At the same time, the designs look neat and stylish.

From small lengths and a few tees, you can get a nice dryer for clothes and towels. It is easy to clean and does not corrode.

Relaxing by the pool or in the shade of the garden is impossible to imagine without a sun lounger. The photo shows a chaise lounge, completely consisting of plastic pipes, but can also be combined with dense matter.

Carport - one more useful application PVC pipes. It will protect transport not only from a rain, but also from the scorching summer sun.

For garden decor, a garden arch is often used, which can also be made of plastic pipes. A new element appears in its design - bent arcs. You can bend pipes for an arched vault by heating with a gas burner or boiling water. You can also put the pipe on a metal rod and, sticking one end into the soil, bend it in an arc. This method requires some physical effort.

A simple and light gazebo will decorate the garden and protect from the sun and light rain. For the presented option, it is enough to fix a waterproof raincoat fabric on the pipes and bend them on reinforcing bars. To make the design reliable, you need to take care of good fixation of the rods in the soil.

The range of application of plastic pipes is truly huge and limited only by your imagination and needs. You need a small woodcutter, a gate, a cart or a fishing rod stand - take the required amount of pipe and bring your idea to life.

It is easy to make a convenient feeder for chickens from sewer pipes. It is very convenient to pour grain with it without going into the corral. Chickens cannot rake grain in such feeders, which saves feed.

A small greenhouse in a summer cottage can also be made from plastic pipes. The easiest option: make a rectangular frame and cover it with a film or agrofibre.

A more serious construction - a seasonal greenhouse - will require more time and material. It is better to connect the elements with bolts so that it is possible to disassemble the structure into winter period. The optimal shape of the greenhouse is arched. To create it, the ends of the pipes are put on half-meter metal bars driven into the sides of the future greenhouse every meter. The dimensions of the greenhouse depend on the intended use. The greenhouse can be installed on the foundation or on the ground. Film, polycarbonate or agrofibre can be used as a covering material.

Plastic sewer pipes can also become a container for growing flowers, herbs and vegetables. Very often they are used to create vertical gardens.

To fence the site, you can use a low fence made of plastic pipes, which is durable and minimum requirements in care (it does not need to be painted annually).

The use of plastic pipes is not limited to the ideas presented. This material is so versatile and easy to assemble (it is easy to cut, bend, has a variety of connecting parts) that it is simply impossible to ignore it in your home workshop.

August 1, 2016
Specialization: facade finishing, interior decoration, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Plastic pipes are an excellent material from which you can collect not only pipelines, but also all kinds of crafts. Moreover, working with them is quite easy and simple, not to mention the fact that this procedure is very exciting. As an example, in this article I will give 10 of the most interesting ideas for using plastic pipes.

Features of making crafts from plastic pipes

Plastic pipes and fittings (corners and tees) in the hands of the master turn into a real designer, from which you can assemble any frame structures. The only thing you need to pay some attention to is the choice of pipes. For example, metal-plastic is not suitable for these purposes, since its bending strength is very low.

Therefore, it is best to use the following types of pipes:

Before gluing the PVC pipe to the fitting, it must be chamfered to get rid of burrs that can scrape off the glue during the joining process.

Homemade options

Option 1: Laptop stand

Let's start with the simplest, but nevertheless very useful product - a laptop stand. In the photo below we see how to make a PVC pipe stand.

So, the instructions for its manufacture are quite simple:

first of all, measure your laptop so that the stand fits perfectly;
then cut the tubes according to the dimensions obtained:

2 tubes should be about 5 cm longer than the depth of the laptop;
1 tube should be 2-3 cm shorter than the width of the laptop;
2 short tubes - the height of the stand rise depends on their length;

now glue the corners to the two long tubes and connect them to the short tubes, resulting in 2 L-shaped parts;
after that, glue the corners to the short tubes and connect the parts with the longest tube, which should be perpendicular;
then glue the corners to the two ends of the L-shaped parts, which will serve as limiters so that the laptop does not move out of the stand;
at the end of the work, the product can be painted in any color you like with spray paint.

Now it will be more convenient for you to work with a laptop, besides, you can put it on a bed or sofa, and it will not overheat.

Option 2: sled for children

Sledges made of plastic pipes are a more complex design, however, they are made in almost the same way as a laptop stand. That's why every craftsman can cope with the task.

To make a sleigh, you will need the following materials:

two pipes with a diameter of 40 mm;
tips for pipes 40 mm;
pipes with a diameter of 25 mm;
tees and angles at 90 and 45 degrees for pipes with a diameter of 25 mm.

Sledges are made as follows:

start by preparing the drawing. At the heart of the design, use any sled in the photo above. The main task of the drawing is to indicate the dimensions of all parts, which will simplify and speed up further work.;
then make skids from magpie pipes. To do this, mark the places of their bending with a pencil and warm up for open fire, rotating the pipe along the axis. When the plastic softens, the ends should be bent so that the skids slide easily over the snow and do not burrow.
It is desirable to bend the skids not only in front, but also in the back. After that, plugs must be put on the finished runners;
now you need to assemble the upper part of the sled, i.e. frame to which the seat will be attached. The frame must have racks for connection to the skids.
This design is a rectangle with stiffeners in the form of jumpers. For mounting jumpers and racks, use tees;
if you go sledding Small child, also be sure to make a back. To do this, use short tube cuts and 45-degree corners;
when the frame is ready, you need to connect it to the skids. To do this, install it on the skids and markup, marking the holes into which the racks will be inserted;
now drill holes of the required diameter so that the racks can enter them;
after that, connect the runners with the uprights, inserting them into the holes until they stop. To fix the racks in the skids, use self-tapping screws;

at the end of the work you need to make a seat. To do this, you can use wooden slats that are screwed to the frame with screws or planks.

This completes the manufacturing process of the sled.

Option 3: shelving

Another simple and quite useful design in the household is a rack. It can come in handy in the garage, for storing all kinds of little things, in the country or even in the apartment, in order to conveniently arrange conservation in the pantry.

The process of making a rack is extremely simple:

start work by completing the drawing, indicating the dimensions of all parts;
then, according to the drawing, assemble the racks and tie them with jumpers using tees;
now install the rack and lay the boards on the lintels, which will serve as shelves;
if the rack turned out to be high, you need to provide brackets for attaching the structure to the wall.

Option 4: snowshoes

We figured out how sleds for children are made, now let's look at how to make snowshoes with your own hands from plastic pipes for adults. For this you will need the following materials:

2 pipes with a diameter of 20-30 mm, one and a half meters long;
a nylon cord 4-5 mm thick - 40-50 meters;
elastic band for fixing the foot.

The process of making snowshoes is as follows:

cut a piece 200 mm long from each tube;
mark on long blanks in the middle and heat them in this place over an open fire, for example, over a gas burner;

when the plastic softens, bend the pipes around a cylindrical object, for example, you can use a kettle for this purpose. Wherein in the process of bending, do not apply a lot of force, it is better to heat the workpiece again so that it does not crack;
reheat the resulting sock and give it an angle of approximately 120-130 degrees. Do the same with the ends of the pipes;

now both ends of the pipe should be connected. To connect pipes, you can use self-tapping screws;
after that, treat the frame of the snowshoes with sandpaper so that the surface is rough;

now you need to weave a mesh of nylon cord on the frame. You can connect nodes according to the diagram above.

In the process of making the grid, you need to tie a jumper to the snowshoes. When the product is ready, tie elastic bands to secure the snowshoes to the leg.

The size of snowshoes depends on the size of your foot. With a foot size 42, a snowshoe with a length of about 60 cm and a width of about 25 cm is sufficient.

Option 5: catamaran

lovers active rest in nature, it can be recommended to make a homemade catamaran from plastic pipes. This design is based on external sewer pipes of large diameter. Their length should be about two meters.

The manufacturing process of this product is as follows:

place three pipes at the same distance from each other and connect them with smaller diameter pipes using clamps or other fasteners. The distance between the two extreme sewer pipes should be about one and a half meters;
then glue plugs on both sides of the pipes. To reduce the resistance of the floats, “bend” them from the front using 45-degree corners;
on the base of the tubes connecting the floats, lay wooden shield, which will serve as a deck;
a seat should be fixed on the shield, which can be made from boards.

On this catamaran is ready. This swimming facility is perfect for fishermen, as well as just lovers of walking on the water.

To control the catamaran, use the oars from the kayak. Of course, if you wish, you can design and implement a more complex design with pedal-driven blades.

Option 6: tent

The tent is made according to the same principle as all other structures - it is based on pipes and fittings. The only thing is that the parts do not need to be glued or soldered to make the products collapsible. Another feature is that you will have to sew an awning, for example, from a tarpaulin or other suitable canvas.

The construction process looks like this:

to make it easier to work, draw a drawing indicating the dimensions of all parts and the location of the fittings. The design of the tent is quite simple - the base is a rectangle, to which four posts are attached at the corners.
From above, roofs are attached to the racks. If the roof is gable, then you will need fittings at 45 degrees to assemble it;

then cut the tubes into parts of the desired length;
now assemble the frame from the received parts and fittings according to the drawing;
Next, you need to make an awning. To do this, cut the material into canvases for each side of the tent, as well as the roof, and then sew them;
now put the resulting awning on the tent to make sure the job is done correctly.

For the tent, use quality fittings so that they hold the pipes firmly and do not crack.

Option 7: making a velomobile

Fans of designing and inventing can be recommended to make a velomobile. Is it true, keep in mind that for its manufacture you will need stronger pipes than for the products described above.

An excellent solution is PVC pipes with metal reinforcement with a diameter of 1/4 inch. However, it is almost impossible to find such material in the domestic market. It can be replaced with 40 mm PVC-U pipes intended for swimming pools, although their disadvantage is the high price of the fittings.

In addition, conventional polypropylene reinforced pipes can be used, inside of which metal tubes of a suitable diameter are inserted. Another option to increase the strength of pipes is to fill them with mounting foam.

The process of manufacturing a velomobile frame is not difficult. The design is assembled according to the same principle as all other products - the tubes are connected using fittings and thus the frame is assembled.

The most difficult thing when performing this task is to securely fasten the metal parts - the wheel axles, and the drive. To do this, use metal plates that can be fixed to the frame with bolts. To screw the bolt into the pipe, use the bushings that are glued.

As for the mechanical part, all parts are used from the bike. The only thing is that you can use the electric motor, as shown in the photo above. In this case, an electric drive is installed on one rear wheel, and a mechanical drive on the second.

To implement a mechanical drive, an axle with bends in the form of pedals should be placed in front, as in the photo below. This axle, in turn, transmits torque to the "sprocket", and then everything is like a conventional bicycle.

Here, in fact, are all the main nuances of making a velomobile. For other design tasks, you will surely find solutions yourself.

Option 8: zherlitsa

If you love fishing and experimenting with different gear, then you will probably be interested in this idea of using a plastic pipe, which is to make a summer vent. To do this, you will need a piece of sewer pipe with a diameter of 32 mm and a length of 10 cm, as well as a fishing line, a hook and a sinker.

A vent is made from a plastic pipe as follows:

remove the edges from both ends of the workpiece;
then drill a hole with a diameter of about 5 mm, retreating from the edge of about 1.5 cm. This hole will be used as a fishing line stopper;
now drill from the opposite side of the workpiece through hole, i.e. the tube should have two holes opposite each other;
now you need to equip the workpiece. To do this, tie a suspension from a fishing line to two opposite holes (for hanging a vent). The suspension should end with a noose;
now tie the fishing line to one hole and wind it around the tube. 10 meters will be enough;
at the end of the fishing line you need to put on a sliding sinker, and also tie a tee hook;
to fix the fishing line in the working position, put a tight rubber ring on the workpiece.

Now the tackle is ready, it remains to prepare the bait and go to the nearest suitable reservoir to check it in operation.

Option 9: folding chair

If you liked the previous option of using a plastic pipe, then the folding one will also come in handy. Moreover, it is made extremely simply and quickly:

assemble a rectangle with dimensions of approximately 40X30 cm from tubes and corners; if desired, you can make the chair even more compact;
now assemble the second same rectangle. Its height should be the same, and its width a few centimeters less so that it can fit snugly into the first rectangle;
now, in the center of the long sides of each rectangle, drill holes opposite each other;
then connect both parts with bolts;
at the end of the work, sew a rag seat, as in the photo above.

As a result, you have a light and compact chair that can even be put in a backpack.

Option 10: a waterfall for children

As you know, children are very fond of splashing in the water on hot summer days. Therefore, if you have a dacha, do not deny them such a pleasure and make a waterfall.

The design of this device is extremely simple. It is a U-shaped frame. In the crossbar of this frame from below, you need to drill small holes through which jets of water will fall down.

To keep the crossbar stable on the ground, attach the legs from below, perpendicular to the frame, as shown in the photo above. Attach a hose fitting or threaded fitting to one of the legs. Install plugs on the other ends of the legs.

Now the waterfall is ready, it remains only to connect water to it. For these purposes, you can use a tank from a summer shower or install a special container where the water will be heated under the rays of the sun.

Conclusion

From plastic pipes, as we found out, you can make a lot of interesting and useful crafts. We considered as an example only 10 options for their use. However, if you stretch your imagination a little, you will surely discover a lot of other equally interesting ideas.

From the video in this article, you can get Additional information about how sledges are made from plastic pipes. If some points are not entirely clear to you, ask questions in the comments, and I will be happy to answer you.

August 1, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

From PVC pipes. Namely, a foam cutter, a hacksaw for metal and a selfie stick. For the manufacture of these homemade products, the author needed the following tools: an industrial hair dryer, a pipe bending spring, a glue gun, a drill, pipe scissors, steel wire, a vise.

Styrofoam cutter.
For the manufacture of the cutter, the author used the following materials: plastic pipe, nichrome wire, power supply, two bolts with a hook, plugs for the pipe, wires.

cutting off desired length pipes, the author of the homemade product inserts a special spring inside it for bending pipes. So that the spring can be easily pulled out, a rope is tied at its ends.

Then he begins to heat the place of the fold with a hair dryer.

Bends the heated place, giving the pipe the desired shape.

Cut off excess length. Having drilled a hole in the bottom of the pipe, he pushes the wires into it. Pulls the black wire into one and the red into the other end of the pipe.

Drills holes in the plugs and inserts bolts into them.

Screw the ends of the wires to the bolts, clamp them with a nut.

Inserts plugs into the ends of the pipe.

For homemade, the author used an adjustable power supply. I put a heat shrink tube on the power supply output wires. Soldered with cutter wires.

I removed the heat shrink and warmed it up with a hair dryer.

He treated with hot glue the place where the wire entered the pipe.

Glues the handle to add strength.

Between the hooks, with tension, stretches a nichrome wire.

All the cutter is ready.

Since the power supply has an adjustment, by increasing or decreasing the voltage, you can control the heating temperature of the thread.

Hacksaw for metal.
For the manufacture of a hacksaw, the following materials are needed: PVC pipe, canvas, steel wire, two spring washers.
Cuts the pipe to size. Inserts a spring, heats with a hairdryer. Gives the pipe the shape of the letter C. The distance between the ends should be equal to the length of the hacksaw blade.

Whatever the hand slides, on the one hand it makes a handle. From the bend to the end of the tube, he winds steel wire around it.

The ends of the wire are fixed in a taut position.

When heated, the tube will try to take its original shape, so the author fastened the ends of the tube with electrical tape.

He heats the tube with a hair dryer, pulling the wire at the same time. Thus, it makes coils over the entire surface of the handle.

The ends of the hacksaw should be at the same level. Trims them with scissors. At the ends in the middle he makes cuts.

Inserts a hacksaw blade into the cuts. Insert spring washers into the holes in the canvas.

The hacksaw is ready.

Selfie stick.
For the manufacture of a selfie stick will be used: steel wire, plastic pipes two diameters, plugs, collar, bolt.
First, the author makes coils on one side of the PVC tube (larger diameter) using wire and a hair dryer.

On the other hand, he makes four cuts.

The smaller diameter tube should easily go inside the larger one, but not hang out in it. A hole is drilled at one end of the smaller tube. Then he heats the end with a hair dryer and flattens it.

The thread on the bolt must be the same as on the chamber. Having cut off a ring from a tube of a smaller diameter, he puts it on a bolt head. The bolt is clamped in a vise. Heating the ring with a hair dryer gives it the shape of a lamb.

Bends a thin tube, at a distance of 8-10 cm from the flat end, at a right angle. Insert a bolt into the hole.

Plastic pipes are successfully used in the installation of plumbing, sewerage, heating systems. They are usually bought in specialized stores. The cost and ease of processing made such materials popular. For building or repair work they are taken with some margin, and after completion, unnecessary pieces remain. So what can be made from these scraps of plastic pipes?

Material and its qualities

PVC pipes and the remaining mounting elements will be successful crafts. A zealous owner will not throw them away, litter their balcony or cottage with them. After the plumbing is done, the skill of processing and docking will appear. Why not use it in creating useful things, improving living space. Fantasy, skillful hands and ideas in our photo tube crafts will inspire you to create unusual items.

The main advantages of pipe materials:

price, PVC pipes are inexpensive, and you have already paid for trimming, you may have to buy connecting elements;
environmental safety, plastic water pipes are completely neutral, do not corrode;
the strength and light weight of the structures are ensured, which is undoubtedly convenient;
appearance, white plastic looks good in any modern interiors;
service life - manufacturers confirm the half-century life of pipes;
ease of assembly and disassembly, if necessary, repair of structural parts.

Processing features

The manufacture of any crafts requires accurate measurements and accurate cuts. This is mentioned in every pipe craft master class. Three rules for working with plastic must be observed:

Measure the length of the segment with a tape measure, be sure to mark with a marker.
Cut the marked area with a knife.
Fix the pipe before cutting it with a hacksaw or pipe cutter.

Connections are made easier if the pipes are cut at right angles. Fasteners that are sold in hardware stores are designed for such an angle.

Cut and clean the cuts so that there are no nicks and chips.

Pipes can be bent. To do this, they are heated with a building hair dryer or, with caution, with a gas burner. The heated pipe is bent according to the template, fixed and left to solidify in this form.

How and what to connect

PVC pipes have become popular due to the ease of installation and assembly work. To connect them, you need corners, couplings, crosses. They are fastened either by hot soldering using an “iron” or simply with glue and self-tapping screws.

If the design does not require tightness, then soldering the pipes is not necessary, and without it it is also easy to disassemble the structure. This technique is used when creating greenhouses, when they are mounted for the spring-summer period, and then disassembled for the winter and stored in this form.

Crafts from plastic pipes

Products made of PVC pipes according to the assembly methods are divided into two types:

collapsible, this is a kind of constructor that is assembled and disassembled many times;
not collapsible, they are assembled once.

In the first case, such structures are assembled for the season or if necessary. Interesting crafts from pipes for summer cottages - greenhouses, gazebos, pools, or folding chairs and tables for hiking in nature are examples of collapsible crafts. Lightweight, durable and useful products are easy to assemble and disassemble.

In non-collapsible crafts, pipes are fastened with glue or screws. Short cuts are easily connected into simple bookshelves, coasters. Try your hand at assembling elementary structures, look at the result and be inspired by it to create products in a minimalist style original ideas pipe crafts.

Armchairs, chairs will update the interior of the apartment. And if you have basic knowledge in the field of electrical engineering, then you can assemble unique lamps - a wall lamp, a table lamp, a chandelier or a floor lamp.

Very short remnants up to 10 cm long are well suited for designer organizers. Tools will find their place in them on the wall of the workshop, stationery trifles on desk, even cosmetics in the bathroom.

Assembly example

Let's show how to make crafts from pipes with your own hands using the example of a mobile clothes dryer. The simplest form resembles a folding easel. The dryer is made from two rectangles of the same height but different widths. The inner rectangle is already made by 10-12 cm. The widest place of the dryer was 80 cm, but you can do it at your discretion.

For its manufacture you will need:

all pieces of pipe with a diameter of 25 mm, legs 60 cm long 4 pcs, 20 cm 12 pcs, crossbars of the base 80 cm 4 pcs, crossbars of the inner rectangle 70 cm 3 pcs;
connecting corners 2 pieces;
tees 12 pcs;
clamps 2 pcs.

The procedure for assembling the structure

We make dryer racks from segments 20 cm long. To do this, we vertically connect 3 such pieces with tees. We get racks a little higher than 60 cm. Insert the legs from below, we get 4 racks 120 cm high. We connect two racks with a wide crossbar using corners.

We insert the crossbars into the free horizontal holes of the corners, we get the main and inner rectangle. With clamps we fasten the inner narrow rectangle to the upper crossbar of the base.

The dryer is installed as the letter “L”, for stability, you can adjust the angle of the rectangles. Laundry is hung on the crossbars, you can put the dryer in any convenient location. The assembled structure is easily hung on the wall in the pantry.

Important: Similar step by step instructions showing how to make pipe crafts are easy to find on the Internet. The use of leftover plastic pipes is not limited to the ideas presented, this material can really be used in your own home workshop.

Photo crafts from pipes

PVC pipes are the best option not only for plumbing, but also for making DIY crafts. How often does it happen after repairs that there are several segments that are a pity to throw away, and so they lie at home or in the country and wait in the wings? This situation is familiar to many, so we free up space and create original crafts from pipes for our house and plot.

Pipe connection options

Plastic pipes are a generic name for products for creating a plumbing, sewerage and heating system, which are made from various polymers, most often PVC or polypropylene. Such pipes differ in a lot of advantages, including high strength, lightness, durability, safety and ease of maintenance.

In order to carry out crafts of such a plan, it is important to know how to connect their individual parts to form the intended design. Polypropylene pipes are interconnected using a welding machine, which differs high cost, That's why the best option will be his rent. But you still need to learn how to work with such a device, so fittings are more often used for these purposes.

If we talk about plastic pipes, then most often they mean PVC products, which are connected by such options:

After familiarizing yourself with the technology of connecting plastic pipes, you can perform any craft. It is only important to initially draw a sketch of what you want to get in the end, indicating all the dimensions and design elements of the craft.

On your own, you can create unique crafts from pipes that will delight the owner with their appearance and practicality, and to a greater extent surprise guests.

Organizer

This craft is the most in a simple way use plastic pipes. If there are only small pipe cuts, then they will fit perfectly into the overall idea. To make a mobile organizer, you just need to glue pipe sections right size among themselves in the intended sequence and decorate the design. This storage option will always keep the workplace in order.

The second option for a craft organizer is a stationary one. In this case, the craft blank is mounted on a horizontal surface or wall. This is how you get niches for various little things, created with your own hands from pipes.

Frame or room divider

If there is a desire to decorate the wall of the house with a mirror, but it does not have a suitable frame, it is not necessary to spend money on buying a new one. To perform it, you will need to cut pipes of different diameters into thin rings. On paper, you need to draw a layout of the future craft in real size and collect it directly on it from pipe scraps. You can create both a strict geometric frame and a set of randomly scattered rings. As a result, the resulting pipe craft can be painted in the desired shade or decorated, depending on the owner's imagination.

Thus, it is easy to create a decorative partition from pipes, which can decorate not only the interior of the house, but also suburban area. Efforts, of course, will have to make more, but they are worth it.

Shoe rack or wine rack

The situation with a bunch of shoes in the corner of the hallway is familiar to many, but there is not always a place to install a full-fledged shoe cabinet. In this case, you can dream up and make a craft-shoe rack made of plastic pipes. To do this, you will need to take pieces of pipe with a diameter sufficient to fit a pair of shoes, and cut them into pieces about 30 cm long.

Important! It is best to connect the components of the craft with self-tapping screws, so that the design is as reliable and durable as possible.

The assembled product must be fixed on the wall to prevent falling. This shoe is compact and appearance no worse than store-bought shoe organizers.

This technology can be applied to the construction of bathroom shelves, a wine bottle holder and even a place to place children's toys.

Vases and planters

From scraps of sewer pipes, you can make craft pots that are perfect for planting flowers in them and placing them in a summer cottage. If you first attach the bottom to the blanks, for example, from a plastic bucket, or simply provide them with a stand, then you can even put such pots indoors.

Crafts-vases made of pipes of small diameter look stylish. When placing several blanks of different heights, decorated using the decoupage technique, you get a spectacular place for cut plants.

Stands and shelves

If country house or a garage needs to be equipped, then the creation of PVC pipe shelves will be an excellent alternative to buying massive wooden products. To form this kind of crafts from pipes, you will need to connect the segments in a certain sequence.

So, snake-shaped shelves are suitable for storing books and photo albums. It is also convenient to hang clothes or towels on them.

Crafts-stands for flowers look no less creative. In the manufacturing process, special attention is paid to the places of fixing parts to each other and the reliability of the structure. You will also additionally need pieces of plywood or other material to make countertops in fake pipes.

garden arch

Such products, entwined with plants, look sophisticated and elegant on the site. They are able to decorate even any celebration. For example, if you decorate such an arch with satin ribbons, flowers, tulle, then this will be an excellent decoration for an outdoor wedding ceremony or photo shoot. And making crafts does not take much time.

There are many options for arches, so the design of the craft is selected in accordance with the wishes of the master. The main difficulty in the formation of this craft is the need to bend some parts of the pipes. The easiest way to do this is to slightly heat the desired section of the pipe with a gas burner.

If this is not possible, then the connection of pipes for crafts is carried out simply at an angle. In this case, a trapezoid or a triangle is formed. They make an arch with two vaults so that there are transverse elements between them, which during operation will help the greenery to be distributed over the entire surface of this craft.

Alcove

Not only small products can be made from pipes. For example, a gazebo made of this material will be an excellent option to complement the resting place. To do this, you need to take long segments, form arcs from them and fix them in the ground. A dense awning fabric is stretched between them as a roof, and in the interior space to install dinner table or a bench to rest. So, without spending extra time and money, you can create a masterpiece gazebo that will save you from the summer heat.

Advice! You can connect the elements of the craft so that you get a house. It is too interesting option large crafts made of PVC pipes.

Plant containers

If the summer cottage does not have a sufficient area, then vertical plantings are the best option saving space. In this way, it is easy to grow greens, flowers, and even some varieties of berries.

To do this, you need to form a semblance of oblong flower pots from sewer pipes. You can get them by making holes along the craft and leaving enough space for the soil and plants. At the bottom of each craft, holes are made for the outflow of water. It is convenient to mount such planters on a pre-prepared wooden stand, directly on a wall or on a fence. If you connect these beds with a thick rope, you get a single structure that can simply be hung.

Lamp

For modern interiors interesting crafts that are made by hand are suitable. One of these interior details can be a lamp made of plastic pipes. The product may be completely different shapes, the main thing is the correct connection and the ability to connect electricity for crafts. It is worth taking on the formation of such crafts only if you have skills in working with electricity.

It is not even necessary to connect the elements of the craft with each other. If you take pipe sections of different lengths and cut holes of different configurations on them, you will get a unique lamp that will leave fancy patterns on the walls.

Coffee table

If you want to arrange a garden area or update the furniture of the veranda, plastic pipes can also become the base material. Craft coffee table of them is easy. First of all, they draw a draft of the future crafts and, following it, form the frame of the table. It can be different, both assembled from many parts, and representing several segments mounted on a stand.

As a countertop for crafts, as a rule, glass or a sheet of plywood is used. Decorate it as you wish. The glass top looks spectacular and stylish, but it will need to be additionally fixed to the frame.

Conclusion

Crafts from pipes are in a unique way design not only suburban area but even at home. There are many interesting ideas that deserve attention. If you spend a little time and effort, you can get almost anything from plastic plumbing or sewer products.