How to paint a veneered door, paneled, metal, primed, "Canadian" and others. All options for painting doors from different materials. High-quality painting of interior doors: painter's advice How to repaint a veneered door

To date, such doors are considered relevant. There is a huge selection of various designs, palettes and shapes. Wenge or walnut veneered doors are very popular.

How do these designs differ from other similar products? Veneer is wood cut into thin strips. The thickness of these strips is different and reaches 1 centimeter. Such sheets are used to decorate doors, the internal mass of which is made of pine, oak, etc.

The natural texture of the material is an important advantage

Veneer is considered a demanding material. And in order for the doors to get used to environment(temperature, moisture), it is brought into the apartment where it will stand a week before installation. If you handle such a door carelessly, scratches and scuffs may form on its surface. Such defects are not difficult to eliminate on their own. The question arises, is it possible to paint veneered doors? If yes, how can this be done? For such a case, use furniture varnishes, wax polishes. Such materials are transparent. It is necessary to apply varnish to the surface, and then rub with polish.

Pay attention to the damaged surface.

If the damage is not significant, then a layer of paint material can be applied only on it. But if the defect is very noticeable, then all doors should be updated. This method will not allow spots and intermittent sheen.

The door after applying the varnish will have a uniform shine and a beautiful appearance.

Veneer doors can also be painted with paint.

It is important to decide what we want: to leave the color as it was or completely change the painting. Also important is the degree of deformation of the surface of the doors and how they were painted before.

But, is it possible to paint veneered doors if varnish has been applied to them before? The previous layer of paintwork material should be removed with grinder using fine-grained tape.

If you decide to completely repaint the entire surface, then you need to be prepared for additional work. Only the work must be carried out very carefully, because the thickness of the wood is insignificant. If you are afraid that you will not be able to cope with this yourself, contact the experts.

The preparation of doors for painting includes: cleaning the surface from dust and dirt, covering irregularities with a special primer.

You can decorate a veneered door with water, glyptal, polyurethane paint. It is strictly forbidden to paint the veneer with nitro paints. There may be stains on the doors that spoil the appearance. by the most suitable option for painting veneer, water-based paint is considered.

Is it possible to paint veneered doors if they are made of artificial material? Theoretically, it is possible, but to achieve an excellent result is most of all that will not work. It is impossible to choose a paint that adheres strongly and does not roll off a very smooth base. And if you prime the surface, then the effect of natural wood will disappear.

Remember that you can paint veneer doors with varnish or paint.

If the original paint layer is changed with a chemical dye, there is a risk of destroying the environmental friendliness of the product.

Painting veneered doors is not difficult, you need to do it in the same way as wood products, because veneer is wood.

Before painting the doors, you need to process it with a sanding mesh. This work must be done manually if the veneer is peeled or sliced. You can use a grinder if we are preparing sawn veneer.

After grinding, the surface must be primed.

Thoroughly mix the prepared paint, and it can be: acrylic, enamel, pentaphthalic paints. They dry quickly and are easy to apply. You can paint with the finished color, or you can tint it yourself. But before painting, you need to make sure that the surface is completely dry. If the doors were in a damp room, then it is necessary to dry them.

The paint should be applied with a roller, brush or sponge. You can look at the instructions and read how it is recommended to apply the material.

After applying the coloring matter, you need to allow time for drying. During drying, protect the surface of the door from dust.

The ideal result can be achieved when applying paint with an airbrush. Indeed, in this case, the paint lays down in a thin layer and evenly, which affects the appearance of the door. But to use such a tool, you need to have certain skills.

Can the door color be changed?

When planning our interior, we try to think through everything to the smallest detail: what color will the walls, floor, furniture and, of course, doors be. But the creation of decoration exclusively to your taste is not always possible. Sometimes you have to work with ready-made furnishings, for example, after buying a finished house or apartment. And what to do if the color of the door panels does not suit you, does not match with other materials and interior details? There are some ways to restore doors, change their color and appearance in general.

Door leaf painting

This way of changing the appearance is not suitable for everyone. interior arch and doors. The canvas or portal structure must be made of natural wood. Most often, doors for painting are made from pine or other inexpensive wood species. To change the color use the following materials:

• alkyd enamel
• acrylic paint
• nitro paint.

These types of coloring compositions are suitable if you need to radically change the shade of the canvas. Usually use white paint, but some interiors require brighter details.

How and how to paint a veneered door

And the LKM market offers a wide range of tones. To give the canvas a natural color or a noble woody shade, the solid wood door is covered with varnishes or stains.

Lamination or wallpapering

You can change the image of the door not only with the help of paint. At home, it is quite possible to laminate the canvas yourself. The same applies to updating the arch in the apartment. For such a procedure, special adhesive paper is purchased, the pattern on which imitates the texture of wood. Wishing to get more original decorative element, can purchase photo wallpapers for pasting door panels. Such material usually has a bright expressive pattern, for example, a beautiful landscape, an architectural object, images of flowers, etc. Such a solution in the interior will look unusual, but it can get boring pretty quickly. Although, if necessary, the canvas can be restored again by pasting it with a new film.

Cloth decoration

Interior doors can be given a fresh new look with fabric. There are two ways to do this: pasting the canvas or its elements using the patchwork technique or locally with one type of fabric and the construction of curtains that are attached in place of the glass. To decorate the door with textiles, you need to carefully consider its color and print. Most successfully, this decor is in harmony with the interior style of Provence, shabby chic or country. For pasting, you need to choose a well-crafted dense fabric.

What is the best way to paint a veneered door?

How to repaint an interior door?

An important part of the repair is the replacement interior doors. However, if the doors have not lost their properties and are able to serve for more than one year, then it will be pointless to change them. In this case, to repair them, it will be enough to update the color by painting the doors. This procedure is not complicated, and you can do it yourself.

Preparing to paint interior doors

First of all, it is necessary to clean the surface, handles and glass inserts from dust. You should also remove the old layer of paint. It is not necessary to remove the door from the hinges; contact with a minimum number of surfaces allows you to get best quality staining.

Next, you need to remove the handle and lock, filling the resulting void with rags or cotton wool. To make it convenient to open and close the doors, stretch the wire instead of the lock. It is better to cover elements that will not be painted with polyethylene or glue a newspaper with toothpaste.

If it is inconvenient for you to paint a door that is in vertical position, then it can be removed and put on the table.

The choice of paint for interior doors

The main issue in the performance of these works is the selection of paint, which is carried out based on the material of the door and the nature of the old coating.

• The best option would be to use acrylic enamel, often used for painting rounded logs. Its advantage lies in the presence of a huge selection of colors, making the surfaces dull. Plus, it practically does not smell. Of course, the cost of such paint will be much higher than usual and additionally requires fixing with varnish or other hardening coating.

• Alkyd enamel is characterized by good strength, which is much cheaper than the previous version, but has a pungent odor, therefore, during the period of work, the room must be isolated from people.

• Even greater strength and long service life has nitro paint, which is also characterized by an unpleasant odor and toxicity.

  When working with it, it is important to strictly follow all safety measures and carry out painting when there are no people in the room.

Interior door painting tool

The result of the work depends not only on the choice of paint, but also on the tools used, the choice of which is carried out depending on the material of the door, on the paint used, as well as on the desired result.

So, when painting an interior door with enamel or varnish, you must use a brush. If it is important to preserve the natural structure of the wood, focusing on patterns, then a rubber spatula or sponge is the best option.

The roller is used when processing large areas.

The airbrush has found the most application when painting metal doors.

Self-painting interior doors

• On initial stage get rid of the old cover. This can be done by first washing the door with soapy water, and then treating it with paint thinner. If necessary, you can use sandpaper.

• Then the door is covered with putty, which can be purchased ready-made or prepared independently by mixing wood sawdust with PVA glue. After drying, go over the surface with sandpaper.

• It is better to start painting the door from the panel, making even strokes along the fibers with a brush. Then proceed to the processing of recesses. The ends are painted last.

• Painting the door alone will not give the desired result, as the coating appears to be unevenly applied. Therefore, you need to go over the surface again with sandpaper and apply a second coat of paint.

• For painting door frame, the walls adjacent to it must be sealed with masking tape, otherwise it may be necessary to re-paste the wallpaper. Paint, first, the vertical strips, then the top and platbands.

Topics for the following articles:

1. l shaped kitchen cabinet
2. solution for installing beacons
3. how to sheathe stairs with carpet
4. How to putty slopes?

Can veneered doors be painted?

Veneer - very demanding material. You need to decide right away whether to keep solid wood or completely repaint the door in a different color.

If there minor defects and scratches, you can do with the usual varnishing, and then carefully rub the door with a polish. In the event that for the interior of the room it is necessary to completely change the color of the door, then you must be prepared for additional work.

First you need to cover all the existing irregularities with a special primer.

Veneered doors can be painted with polyurethane, water-based or glyptal paints.

Nitro paints do not apply - they do not tolerate moisture, and your doors may become covered with dull spots. water paints in this case, the most suitable option.

Wait for the primer to dry completely and start painting.

To paint such doors, you can safely use compositions containing varnish and tone in one ( Lakobeits, for example). This will help to keep the structure of the door, and at the same time it will have a pleasant appearance.

The consistency of Lakobeits is liquid, so it penetrates deep into the pores of MDF, filling them and forming a uniform, thin and moisture-repellent layer.

It is convenient that the tone and varnish are mixed together, thanks to which the door does not need to be tinted first and then varnished.

Since this door has a certain panel pattern, and when painting with a roller or spray gun, it is very difficult to achieve a uniform varnish coverage, painting should only be done by a professional.

For painting with a brush, special skills are not needed. You just need to be careful and immediately remove small smudges.

It is quite easy to prepare MDV doors for painting. It is only necessary to thoroughly wipe the doors with a damp washcloth or cloth so that there are no unnecessary particles on the surface.

Painting panel doors

To date, there are two most popular methods for painting paneled doors.

• One of them is in applying paint first on the door ends themselves. Next, you need to carefully clean the damaged areas of the panel and carefully apply a new layer of primer. After it dries, you can safely apply paint, preferably in two layers.
• And here applying varnish or stain these doors must be carried out strictly according to the manufacturer's instructions. This method is mainly used for doors with a smooth surface.
• Another method is in tinting the door panel. It should be used if the surface has a wood texture.

To hide flaws with wooden surface, you can use a white primer based on shellac. You can create a color shade using a stain.

Painting any surface should be done only with high-quality fabrics or brushes.

How to paint an iron door?

In this case, you will have to face a number of problems, because Iron door in terms of painting whimsical.

The choice of paint is also a big problem. You should not experiment with interior paints - they will not paint iron doors with high quality.

Much greater effect in this regard will be from PF-ink. Although its color scheme is too simple, it will not give any gloss or shine, but it will almost completely paint over the door.

It would be better if, before applying the paint, apply a primer to match. The paint on the primer will lie better than on the iron itself.

Use a spray gun to paint- it will make the job easier.

Painted primed doors

Perhaps, The easiest way. The doors are almost completely ready for painting, it remains to prepare the necessary paint and tools.

Use a brush on uneven surfaces of the door pattern, on flat surfaces - a roller.

You need to be more careful with the doors into which the glass is inserted. Pre-glue the glass edging with paper tape to avoid getting paint on them.

Painting metal doors

If you want to improve your appearance metal door- it can be painted.

How to paint a metal door?

To start you need to remember some rules.

First of all, before painting, it is necessary to thoroughly wipe the door with a sponge soaked in solvent or gasoline.

If the doors have rust, it is best removed with a mixture of zinc and chromium salt.

Welding seams can be removed with a metal brush or a special file. Next, the surface of the door must be coated with a primer, which slows down corrosion and serves as a bond of paint to the surface.

The best paints for such a door are: pentaphthalic, enamel paint and acrylic enamel.
Tools: a special brush, or a spray can.

If you have to paint a smooth door, then you need to divide the entire surface into small squares and start painting from the upper left corner. The paint must be applied in three layers. In the case when the surface is embossed, painting is carried out from the inside to the outside.

How to paint a laminated door?

Since the laminated door has a smooth surface, the paint goes on easily, but it won't last long.

Therefore, first of all, you need to remove upper layer, having varnish and impregnation, using grinder and zero sandpaper.

Also, one must not forget that after the protective layer there is a chipboard, which will easily begin to crumble if deep enough processing is done.

The treated surface must be thoroughly wiped with a solvent and a layer of a mixture of antiseptic and primer applied. Let this protective layer dry thoroughly and feel free to start applying the first coat of paint.

Any paint will do, because after grinding you will have an ordinary chipboard that can be painted with any composition.

Apply paint with a spray gun or velor roller. After the first layer has dried, you need to repeat the coloring again.

After a day, apply a layer of transparent varnish, which will serve as protection during operation.

Painting doors "Canadian"

Painting these doors is best done with a spray gun.

If this is not possible, then you can use a roller or brush. Now to the question "how to paint the Canadian door"?

Usually, it is delivered immediately primed, but if you bought a different option, then it must be primed before painting.

In the absence of a primer mixture, use thinned paint. After priming, carefully sand the surface.

It needs to be done in two or three layers when wet, of course, if you use an airbrush; otherwise, you need to wait for it to dry.

Use alkyd enamel, as it does not fade in the sun and is quite durable.

Installation of the "Canadian" door should be carried out only after its preliminary painting.

As you can see, door color options from various materials enough. In this case, you need to be especially careful and follow all the above rules, and only then you will get an excellent result.

Sometimes it becomes necessary to paint veneered doors. Painting rules are different for different options and are largely determined by the degree of wear of the surface. Most often, such a need arises when buying a secondary home during repairs when the design of this furniture element does not match the overall interior.

Before you start painting veneer doors, you need to select the appropriate paints. For the restoration of doors, the following are recommended:

1. glyptal;
2. water dispersion;
3. polyurethane;
4. suitable for high moisture materials;
5. other materials for coloring veneer.

Interroom doors made of veneer are not recommended to be treated with nitro paints due to poor interaction with excess moisture, leading to the formation of matte spots when the surface is coated. It can cause poisoning due to the presence of toxic substances in its composition.

It is best to use wax polishes and furniture varnishes. First, a layer of varnish is applied, which is then rubbed with polish. But if you need to repaint the door, then you need to use paint.

Stages of self-coloring

Door painting should be carried out according to an algorithm that includes several stages:

• Removing a layer of old varnish or previous coating by treating the door with a soapy solution and a paint thinner. If necessary, it is possible to use sandpaper (without removing the base layer, you can do without if the coated canvas is not damaged).

• Puttying with a special solution that you can make yourself by mixing sawdust in PVA glue. After drying, you need to clean the surface with sandpaper.

• They start painting from the panel, making even brush strokes along the fibers, after which they process the recesses and ends.

• After the first painting of the interior door in the apartment, the coating will seem to be applied unevenly, therefore, a secondary application of paint is used after passing the sandpaper over the first layer.

• Before painting the door frame, masking tape is glued to the wallpaper adjacent to it to protect their surface.

Work on self-coloring is best done with the canvas removed from the hinges. Before starting, you need to inspect it for irregularities, which are sealed with a special primer.

In most cases, veneered doors have some kind of pattern, so painting with a spray gun is quite difficult and should be done by professionals. The choice of paint is determined by the old coating and available financial resources. The best option- the use of acrylic enamel, giving matte surfaces. But she's expensive. When using it, it should be noted that it must be fixed with a hardening coating.

When painting doors artificial materials it is better to turn to professionals, because due to paint dripping from the canvas, poor-quality staining is possible.

Actions in case of minor errors in the work

Small scratches or chips can be repaired by yourself. A transparent furniture varnish or wax furniture polish is selected. With a small area of ​​​​damage, only this surface is painted over. If the area with chips or scratches is visible at a distance of 1 m, then you need to paint the entire canvas to eliminate the shine.

Little nuances of the process

To paint a veneer door, you need to take a not very concentrated paint, because the higher its concentration, the more the pattern will be hidden. When painting, adhere to the following rules:

1. to preserve the texture and pattern, colored varnishes are used (you can choose a varnish taking into account the necessary haze);
2. to give brightness and saturation to the canvas, you need to use a stain, which is best applied with a spray gun, but it can also be done with a sponge and a brush;
3. surface treatment is carried out in a horizontal plane;
4. it is better to paint it in different shades.

When using a brush, it can leave streaks and streaks, so you need to fluff it up, remove loose and loose hairs. To smooth out irregularities, it is necessary to draw a brush along and across the canvas.

When painting a door White color it must be cleaned so that there is no dust or dirt left. Often the question arises what to do with the attachment points door handles. They need to be removed, because it is necessary to prime and impregnate the places under them.

How often the owners of an apartment or office space are faced with the need to change the entrance or interior door. There can be many reasons - from a change in the style and design of the entire room, to banal wear and tear. What to do if you don’t want to change a practically new door at all.

The way out is - traditional painting, able to "breathe" new life. It would be faster and more reliable to entrust such work to professionals, but you can cope with the work yourself. If you paint the canvas taking into account the material and the appropriate compositions, then the result promises to be more than excellent.

How to paint your own veneered door?

It should be noted right away that regardless of the material used, any doors are painted in accordance with the existing rules:

• Firstly, the structure is always removed from its hinges before painting.
• Secondly, the fittings must be removed from the canvas.
• Thirdly, all kinds additional elements(for example, decorative or glass inserts) are closed (glued) with a special protective film.
• Fourthly, the old coating is always removed in various ways.

You can see this process in more detail by watching the video ...

By itself, such material as veneer (photo) is rather “capricious” and demanding (in particular, in comparison with laminate). In practice, veneered doors are pre-brought into the room a week before the work is done - this is done so that the material can get used to temperature conditions and humidity.

What should I do if minor damage or scratches occur during handling?

Such "errors" are easily eliminated on their own with the help of transparent compositions (varnishes) for painting furniture. A wax furniture polish will also work.

If the damage is not very large, it is possible to paint over only the damaged areas with a layer of paint. When defects are visible from distances of more than 50-100 cm, then the structures need to be completely painted - this will prevent the formation of gloss, which is not evenly distributed.

Choosing the composition in order to paint correctly

The choice of paint is a serious matter and required composition must be purchased before the work is completed in the required quantity.

• polyurethane paints,
• water compositions - they are more practical,
• glyphthalic,
• compositions for coloring high level humidity,
• other varieties suitable for painting veneer.

Attention! It is not recommended to use nitro paints. The reason is that such compounds react very poorly to excess moisture, which leads to the formation of dull spots on the treated surface. In addition, nitro paint is toxic and can cause poisoning.

How to paint on your own

The work is carried out in several stages. The first step is to prepare the surface for painting. Preparatory stage It consists in cleaning the surface of all kinds of contaminants, as well as removing old varnish. There are situations when the color is completely new door does not fit at all and does not fit into the overall range in the interior. If the canvas is new and has no visible damage, then it is possible not to remove the base layer, but simply varnish the desired color.

Removal of old varnish or paint occurs with the use of special means for rinsing or fine-grained skins.

Attention! Some people make a big mistake using a grinding impeller - this is unacceptable. Such processing leads to the formation of dents due to high speed revolutions.

Deep chips or visible scratches are primed or leveled with wood putty, after drying, the treated areas are protected with sandpaper.

A little more difficult, if more difficult, the smoothness of the surface during production is ensured by polishing. In such a situation, preparation is carried out using zonal processing with a building hair dryer.

After the preparatory stage is completed, you can proceed to the direct coloring. Painting is the final step and it is very easy to carry out if the canvas is well prepared.

• It should be borne in mind that paints with good hiding power can hide the unique pattern on the surface, so it is recommended to use the least concentrated options.
• The use of colored varnishes will help to better preserve the natural beauty of the design, and in order to make the color more saturated, the use of stain is recommended.

• It is recommended to process the surface in a horizontal position, such painting will make the surface even and smoother.
• It is allowed and even recommended to use different shades of the sides of the canvas, which is especially effective when decorating the interior in different colors.
• Despite the huge range of colors for painting, sometimes you need to give a special tone or otherwise decorate a veneered door. In such cases, stains will come to the rescue. The best and more professional option for applying the stain is a spray gun, but if it is not available, a simple brush or sponge will do.

Veneered artificial door and its painting

To date, there is a huge selection of models of veneer. However, it is not always possible to distinguish (especially for non-professionals) artificial products from natural ones. The difference between artificial veneer is that in artificial versions special film coatings are used, created using 3D effect technologies. Artificial options are practically no different from natural wood products, since a natural pattern is completely created.

But, despite the visual appeal, faux veneer models will be much more difficult to paint. The problem lies in the runoff of paint from the surface of the door. Therefore, when staining, you should remember that the procedure will take a little longer. It is also necessary to approach more responsibly the choice of paint for such products. Therefore, it is recommended not to carry out such a procedure on your own, if you do not have the necessary experience. Turning to professionals will save you from gross mistakes and will allow you to get the most suitable result.

It often happens that when buying secondary housing, interior or entrance doors The apartment leaves much to be desired. For example, the color may not fit the general interior at all, while the structure as a whole is preserved. And because there is a desire to change the door. But why change when they are still solid, in an acceptable condition and can hang for more than one decade? There is a solution: you just need to paint the door.

Troubles will not appear, given the material that forms the basis of the design, and the degree of wear of the surfaces.

How to paint a door made of different materials? The rules for painting in each situation are different. Let's consider them in order.

Veneered doors

For clarity, let's clarify what veneered doors are. Interior veneered doors can be confused with natural solid wood products, although the former are much lighter and more functional. Why? For an answer, you can refer to the features of the technology for manufacturing veneer doors.

Veneer - the material is quite capricious and is nothing more than the thinnest cut of valuable tree species, intended for decorative finishes surfaces of the door frame and leaf. The veneered door conveys the texture and natural hue of natural wood.

Most often, the technique of connecting veneer with a panel structure is used. An MDF shield (modified wood) is glued to a blank made of wood bars (mainly coniferous species). Such a frame is responsible for the necessary geometry of the door, making it more resistant to negative influence humidity and temperature fluctuations. Following a special technology, a veneer coating is glued to the MDF board. That is, the hot pressing method is used.

The gluing of the finish with the base surface is carried out thanks to the resins released from the wood when heated. Synthetic products are not used. To ensure a glossy sheen, the structure is coated with the desired shade of varnish in several layers. He is responsible for the final color of the product. It is important to note that veneered models, as well as from solid wood, within the same delivery from the manufacturer, have significant differences in color from each other.

The reason here lies in the uniqueness of the pattern of the wood cut, as well as in its ability to refract light. Among other things, the panel is finished with more than one sheet of veneer, which complicates the task of harmonizing the pattern of stripes. Each model is unique and original. You can choose several products that are similar in color ratio, but they will still be different in texture and pattern.

Sometimes the internal space of the structure is filled with cardboard honeycombs, which makes it even lighter. This factor is important for an interior door: you don’t have to make efforts when opening and closing.

There are models that are covered not with a cut from a tree, but with films made using a special technology with a 2D effect (artificial veneer), imitating the texture and pattern of wood. Such doors are difficult to distinguish externally from interior veneered doors. Their advantage, in comparison with the latter, lies in a higher moisture resistance.

Veneered door care

The interior door will retain its original appearance for a long time only with careful and careful operation. It is not recommended to use abrasive products that can leave deep scratches to clean the door surfaces.

Liquid-based cleaners consist of chemically active ingredients that come into contact with the lacquer. The use of the latter can leave ugly bald spots on the varnish.

How to paint a veneered door?

Solving the dilemma as to whether to leave the color of the solid wood or completely change the color is the first thing to do. The choice of door restoration method is influenced by factors such as the magnitude of deformations.

When choosing the first option and in the presence of small scratches and defects, varnishing is dispensed with, after which the door is thoroughly rubbed with polish. It is possible to eliminate small scratches locally by applying colored varnish of the appropriate shade.

Sometimes, after buying a vending model of an interior door, it turns out that its color is not quite the one that was expected to be seen, and it does not match the color scheme of the interior. What can be done in this case? It is permissible to varnish a completely new (not used) canvas in a different tone without removing the previous layer of varnish. For this purpose, stable floor coverings do an excellent job, but not furniture!

The previous layer of varnish is removed with fine-grained sandpaper or a special remover. Here it is unacceptable to use a grinding impeller: due to the high speed grinding, dents can occur.

If it is planned to change the color of the door completely (damage is visible from a long distance with the naked eye), then you should prepare for additional types of work. The sequence of actions will consist of surface preparation and painting. Manipulations on natural veneer, due to its small thickness, should be carried out with extreme caution. In the absence of appropriate skills, it is more expedient to entrust all the work to professionals.

The surface is prepared by cleaning the dust and places of contamination, removing the layer of the previous lacquered coating.

The first step is to cover all the irregularities with a special primer. Veneer door can be decorated with polyurethane, glyptal or water-based paint. Nitro-paints for veneer cannot be used - matte spots may appear on it. The best option painting veneered doors - using water-based paints.

To paint the door, you should wait for the absolute drying of the primer.

Staining faux veneer doors is also theoretically possible. However, it is unlikely that the desired result will be achieved, since it is very difficult to pick up a paint that does not roll off a smooth surface and stays on it. And if the canvas is primed, the effect of the naturalness of natural wood will be lost. Holding quality repair faux veneer doors may be somewhat different. This circumstance is important to take into account if this particular model is purchased (or inherited along with the apartment).

We emphasize once again: before using veneer, you should decide how urgent it is to change the appearance of the product and which tool is better to use - varnish or paint.

By changing the composition of the surface layer through chemical dyes, it is possible to violate the environmental friendliness of the structure.

In many ways, consulting with a specialist in veneer doors will help determine this issue.

Painting panel doors

Today, panel doors can be painted in one of two ways.

Method one. First, the paint is applied to the ends. Then carefully clean the damaged areas of the cloth. A new layer of primer is applied to the cleaned surface. And paint is already applied to the primer, and twice. This method suitable for painting door surfaces with smooth surfaces.

Such doors are varnished or stained in strict accordance with the stated requirements from the manufacturer.

Method two. Toning the door panel and frame is used when the surface has a wood texture. To hide the flaws of the wood, you can resort to using a white shellac primer. Stain will help to achieve the desired shade. When painting any surface, only brushes and high quality materials should be used.

Painting laminated doors

On a smooth laminated surface, the paint lays perfectly, but it will not last long. Therefore, the first step is to remove the top layer of varnish with impregnations using a grinder and, if necessary, zero sandpaper.

We should not forget that directly under the protective layer there is a chipboard, which will easily begin to crumble if the processing is carried out at a sufficiently deep distance. The prepared surface is thoroughly wiped with a solvent and a layer of primer-antiseptic mixture is applied. Wait a while for the protective layer to dry, and apply paint.

Any paint can be purchased, since chipboard is unpretentious to the coatings applied to it.

The paint is spread over the surface by means of a spray gun or a roller with velor pile. After drying the 1st layer, apply the second. A day later, the painted door is varnished with a transparent composition, which will act as protection during operation.

Painting MDF doors

You can safely use such compositions that contain 2 components: varnish and tinting agent (for example, Lakobeits). The structure of the product will be preserved, and external neatness, of course, will be added.

The consistency of Lakobeits is liquid, which allows the composition to penetrate deeply into the porous surface of MDF, fill it, forming a uniform and thin layer. The latter is an excellent protection against moisture.

It is very convenient that the varnish and tonic are mixed and applied at the same time. There is no need to apply each layer in turn, waiting for the previous layer to dry.

You can paint with a brush, then special skills from an amateur painter are not required. The main thing is to monitor the absence of smudges.

When painting a door with a pattern with a roller or spray gun, it is difficult to achieve the necessary evenness of the layer. Only a professional should paint in such a situation.

Preparing MDF doors for painting is quite simple: they are wiped with a damp cloth or washcloth to remove excess particles.

Painting doors "Canadians"

Work on Canada is easier to carry out with a spray gun. In the absence of such, a roller or brush is used. Usually Canadians sell already covered with a primer. The only thing left is to apply the main layer of decorative coating.

But if this is not the case, then the product must be primed. Instead of soil is suitable diluted paint. At the end of the primer, the surface must be sanded. After that, staining is carried out directly. In a situation with an airbrush, the “wet” option is suitable, in other cases, the previous layer is expected to dry.

It becomes clear that there are plenty of ways to paint the door between rooms.

When choosing a particular one, do not forget to follow the staining technology and rules, then the result will certainly please.