DIY foam sculpture. Do-it-yourself garden figures from polyurethane foam. Video: garden decor master class

Polyurethane foam - unique construction material, which is widely used for mounting, sealing structures and increasing their thermal insulation. Lovers of garden decorations have expanded the scope of this building material. Garden figures from polyurethane foam each owner can easily do it with his own hands country house or suburban area. In this article you can see photos of finished crafts, as well as popular foam sculptures.

1. Light weight.
2. Ease of use (applied to any surface, easy to cut).
3. Ability to make crafts of any size.
4. The finished product is not affected by precipitation and temperature changes.

Terms of use of mounting foam for garden sculptures

If you have never worked with mounting foam, we recommend that you read the instructions from the manufacturer. Do not forget that the foam inside the balloon is a liquid mass, and when it comes into contact with air, it begins to harden. Complete solidification occurs after 10-12 hours. When working with foam, use personal protective equipment. It is not advised to carry out work at sub-zero air temperatures.

Shake the can well before each use of the mounting foam. During operation, hold the can with the cap down so that the gas does not escape from it and all the foam can be used. Do not immediately apply many layers, as the uncured will fall off. Do everything gradually, apply the next layer at least 10-15 minutes after the previous one. For ease of application, use a special gun.

The appearance of the polyurethane foam figure directly depends on the type of frame. You should first find a picture of the figure or make a sketch to take into account all the nuances and the finished product looked like a wooden or plaster sculpture.

For the manufacture of the frame, you can take different materials, for example, plastic bottles or iron cans are suitable. You will also need wooden planks, rebar and wire. To make the sculpture stable, you need to fill it with sand.

Now you can start decorating crafts with mounting foam. Evenly distribute the foam over the frame, taking into account the future reliefs of the craft. When it completely hardens, it will be possible to remove unnecessary parts with a clerical knife and correct defects. If necessary, add foam to places where you forgot or want to fix something in the craft.

A layer of putty will help protect the mounting foam from destruction. To garden craft turned out smooth, grout with sandpaper. Now take acrylic paints and cover the figure. Preferably two layers or more. To prolong the life of the future masterpiece, it is varnished on top.

Garden figures can be additionally decorated with the most different materials such as beads, flowers or make LED backlight so that the sculpture glows at night.

To make a garden snail, you will need half a can of foam. Cover the table with oilcloth and start applying foam for the base of the snail. When the first layer dries a little, apply a second one and insert a kefir bottle in order to make a snail's neck. Cover the neck with foam too and shape the head with your hands.

Make snail horns and a slightly elongated muzzle. After that, you can start making the shell. To do this, a round hill of foam is applied to the body of the snail. Now insert a bucket that will be designed for flowers and turn the garden craft into an original flower bed.

With a marker, mark where your snail shell begins and ends, and make curls. When the foam is completely dry, sand the product. It remains to decorate the snail and the garden craft is ready.

Materials:
- an old saucepan;
- can:
- oil or acrylic paint;
- foam bottle;
- wire;
- beads.

1. Separately fill the pot and jar with foam and let dry.
2. The jar is the head, and the pan is the body of the frog. Fasten these parts with wire and fix with foam.

3. In the place where the frog handles should be, fix the wire and also cover it with mounting foam.
4. Now shape the head and torso to look like a frog. Make the lower legs as well.
5. Paint the craft with paints and then insert the eyes. The frog is ready, now it can be placed near the pond in the garden or near the pool.

To make a garden fox figurine, you will need plastic bottle. Fill it with sand or pebbles, then the wind will not be able to turn your product over. Foam the bottle, but not immediately with a thick layer, but gradually, pausing for about 15 minutes to set the foam.

For the manufacture of paws, you can use a rubber tube. To make the paws flexible, insert a wire into the tube. The tail can also be made from a tube, which will need to be well lathered. For the neck, use a cardboard cylinder from under the toilet paper. On it, install some kind of round blank for the head.

Propene everything well and give the sculpture appearance foxes. After that, paint the figure with oil paints and varnish. Keep in mind that if the paint is white, then the varnish will give it yellowness.

A plastic ball can be used as the frame of the kolobok. Place it on some kind of support, such as a jar or bowl. Apply foam now, waiting for each layer to dry. To make handles, insert wire.

Also form a scarf out of foam, and you can make ears out of cardboard. When the foam is completely dry, cut out the eyes, mouth and nose with a clerical knife. Make legs out of wooden planks. It remains to color the craft and the gingerbread man - ready!

It is interesting that not only garden figures can be made from polyurethane foam, but also an original lantern that will give your backyard a touch of exclusivity and help decorate the garden in Japanese style. To make a lantern stand, take a pipe that needs to be foamed from the underside and set on a flat wooden base. For the bowl of the lantern, you can use a plastic bowl, which must be fixed on top.

Now pour the foam in layers, waiting for the partial drying of each layer. Come up with a picture for the design of the lantern, draw a diagram and embody the idea with the help of mounting foam. Make a hole in the center of the bowl so that you can secure the lid with screws. Insert the bars into the bowl and froth them.

Attach the lid to the bowl with screws. Now cut out a smaller square from the chipboard. On one side, foam it, and on the other, fix the racks. In the center of the squares, you need to make a hole in order to insert a solar-powered lamp into it later. Hide the wires.

After that, a roof is made from a large piece of plywood, which is installed on racks. To make the relief pattern beautiful, first draw it with a marker on the surface of the lantern, and then gently cover it with foam.

Garden figures from polyurethane foam master class

The finished product is completely painted. To install it, you need to dig a pipe into the ground a little or make a small flower bed around the lantern.

Do-it-yourself polyurethane foam figures help transform any garden plot. Even without the skills of a sculptor and artist, you can make a beautiful sculpture that will enliven your exterior.

from polyurethane foam can also be used to decorate rooms or facades of buildings.

Dacha is a place where we relax and enjoy life. But decorations for the garden and yard cost a lot of money. Therefore, some owners make crafts from polyurethane foam, which are in no way inferior to expensive figurines made of plastic, metal and wood.

To decorate your household plot, you do not need to complete art courses and have "golden hands". A small set of tools, a little diligence and abstract thinking will allow you to get gnomes, frogs, sheep and Christmas trees from quite affordable material.

Do-it-yourself technology for making figures from building foam

First things first, stock up necessary materials and tools. This will determine how well and quickly the manufacturing process will go:

For the frame of the product, plastic bottles filled with sand, boards, metal objects and thick wire are suitable. Even an ordinary brick can become the basis for a future mushroom on its site!
Mounting foam.
Foam gun.
Gun cleaner.
If you plan to grow flowers in sculpture, then in the center of it you need to mount some kind of container such as a bucket, tin can or the same plastic bottle.
Varnish, paint and brushes for them.
Stationery or other knife.

The very process of creation garden figures consists of two successive processes. First, we apply foam to the base and let it harden a little. Then we apply again and so on until we approach the shape we need.

After that, extra protrusions are removed with an ordinary clerical knife, the sculpture takes on a finished shape and can be covered with paint. The whole work can take from an hour to several days, depending on the size of the figure and the thickness of the applied layer. All this is desirable to do in a separate dry room, where there is no excess dust and children do not run.. Otherwise, you will have to wash with gasoline or acetone an extremely sticky substance, which is polyurethane foam.

Sculptures and products for the garden

Below are a few examples of different figures that even a beginner can create on his site. The main thing is to strictly follow the sequence of all operations. And in a few hours you will definitely feel like a real creator, from whose hands an excellent decoration for a summer cottage comes out!

Christmas tree

Making a Christmas tree out of polyurethane foam is easy. To do this, you need to collect twigs and attach them to an iron pipe. This can be done with tape or wire.

After that, it is necessary to wet the workpiece from the spray gun so that the foam “sticks” to the base more firmly.

Acrylic green paint is great for creating a Christmas mood with simple things like stick trims, twigs, polyurethane foam and fishing line.

You will find all the information about paths from corks from plastic bottles.

Ball

The ball is the easiest figure to make. It is recommended to start your creative experiments with it, and after that move on to more complex decorations and sculptures.

We take a can of paint and fill it with sand;
Layer by layer we apply mounting foam;
Upon reaching the required size and more or less spherical shape, we remove the excess parts with a knife;
We cover the product with varnish;
We choose the paint for our decoration, depending on our preferences;
If this is a bun or the head of some animal, we make eyes, a nose and a mustache from buttons, fishing line and wire.

It is possible that the material about will be useful to you.

Ram and sheep

We make a ram and a sheep:

First, let's make a frame. We take several plastic bottles and fasten them with tape. It will turn out something like the "skeleton" of the animal. The lower "limbs" can be filled with sand to make the figure more stable.
Next, you can already apply the foam. But to save it, it is better to wrap the frame with isolon or other polymeric material. The first layer of polyurethane foam - you already have a rough idea of what will happen in the end!
We make ears from pieces of skin. You can also make them from plastic bottles by preheating and bending them.
We process the muzzle with a knife, carefully giving it the necessary features.
We cover the product with varnish.
With paint we draw eyes, a mouth and other "features" of our sheep or lamb!

Scheme for making sheep.

Goat

Step by step how to make a goat:

We make a frame of thick wire, with which we wrap several plastic bottles.
As a frame for legs (bones), it is better to take metal pipes. They can be welded to a pedestal, dug into the ground, or secured with bolts. Your figurine must endure wind and rain, so be sure to securely fasten the base.
We apply one or two layers of mounting foam.
We make horns and a tail from wooden sticks or plastic cuts and fix them.
After applying the last layer, cut off all unnecessary and wrap the product with a sickle or fishing line.
We cover the surface with a primer and paint. You can choose any color, because it is completely your creation!
We make eyes from buttons.
We place our goat next to a pond, in a clearing, in the company of other decorations, etc.

In total, this sculpture will take from one to two weeks to make, as each layer of foam must harden. As a result, from unnecessary pipes, plastic bottles, wire scraps, other "garbage" and several cylinders of mounting foam, you get an excellent decoration for your summer cottage!

What is a plastic curb for tracks will tell you.

Crafts for the New Year

Even if you don’t have anything on hand except a wire and a can of mounting foam, you can create a great decor for the New Year. Various ornaments, Christmas decorations, simple and complex figurines - all this is accessible and simple!

For example, you can make a snowflake. We take a wire of such thickness that it can be bent without effort. We make the frame of the future snowflake out of it. Gently apply one or two layers of foam. While it has not hardened, we achieve even and smooth surfaces. If something goes wrong, you can always add a little foam and cut off the protrusions with a regular clerical knife.

The Christmas ball is made even easier. Tennis ball covered with foam. After hardening, we apply a layer of paint and decorate our New Year's toy in bright and positive colors!

A simplified version of the Christmas tree is made using cardboard or isolon, wound on a rigid base in the form of a cone. Even a child can apply several layers! We level the surface, paint and put it in a prominent place.

How to make a swan from a tire is set out.

Basic rules for working with mounting foam

Shake the bottle periodically.
The ideal temperature for work is room temperature.
Mounting foam does not like straight lines Sun rays. Therefore, it is necessary to work in the shade, and cover the finished product with paint.
The setting time of the foam will vary depending on the manufacturer, temperature and speed of operation.

Important Points

The paint with which the finished product is coated must not contain nitrocellulose. Otherwise, the mounting foam will soften and the decoration will lose its shape.
Gloves are required element work. Without them, washing hands will take much more time than the process of making crafts.
Polyurethane foam is a very light material. Therefore, heavy objects must be placed inside any product made from it. It can be a jar of sand, a plastic bottle filled with water, an iron base, metal pipes fastened with wire, and other massive things.

Video: garden decor master class

This video shows a master class on how crafts are made from construction foam:

Conclusion

You can give your summer cottage beauty and originality without spending a lot of money on it. Foam crafts are easy to make, non-toxic, and can have the most different forms. Starting from a simple ball and ending with figures of animals, birds, gnomes and even people!

For most owners, the dacha is a place to relax. However, in order to arrange the site properly, you need to spend quite a lot of money. In this regard, some summer residents are looking for opportunities to save money, which is why they are trying to create crafts from polyurethane foam that look no less aesthetically pleasing than figures made of plastic, metal and wood. And today, this option continues to compete with another equally common method - creating crafts from plastic bottles.

Each person who does not have special skills and knowledge is able to make his personal plot more attractive. The main thing is to have abstract thinking, be patient and prepare minimum set of tools. All this will be enough for cheerful gnomes, frogs, lambs and Christmas trees to appear on the backyard territory, the creation of which will require quite affordable materials.

Manufacturing technology

The first issue that must be resolved by the summer resident is the preparation of materials and tools, without which it will be impossible to make crafts from polyurethane foam. Moreover, you should not neglect any element of the list, since this will subsequently affect the quality of the work and the time that they will require.

To make a product frame, you can use plastic bottles, which are pre-filled with sand, boards, metal objects and thick wire. In some cases, you can use ordinary brick to create the basis for the future mushroom on your site.

mounting foam;
foam gun;
gun cleaner.

It's a good idea to use sculpture for growing flowers. But for this, in its center you will have to install a certain container, like a bucket, a can or the aforementioned plastic bottle.

varnish, paint and brushes for them;
clerical or other knife;
several pairs of gloves. They must be present with you, as this will help protect your hands from mounting foam, which quickly and firmly sticks to your hands.

If we consider in more detail the process of manufacturing garden figures from polyurethane foam, then two stages can be distinguished in it, which are carried out in a certain sequence.

work begins with covering the base with a layer of foam, after which they wait for a pause, which is necessary for the material to harden;
then we apply the next layer of foam and so on until we achieve the desired shape of the product.

When the desired result is achieved, we take an ordinary clerical knife and use it to cut off the extra protrusions. In the process of such work, we give the sculpture the desired contour, after which you can proceed to its coloring. To complete all the work, you will have to spend from 1 hour to several days. The specific period is determined by the size of the product and the thickness of the applied layer.

It is recommended to engage in the manufacture of garden figures from polyurethane foam in a separate dry room which must be clean and have limited access for children. Otherwise, you will have to spend a lot of time and effort to remove the mounting foam from the surfaces, and for this you will need gasoline or acetone.

Manufacturing examples with instructions

Next, examples of various foam garden figures that can be made without even having experience in this matter will be considered. But in order to achieve the desired result, it is necessary to perform all operations in the exact sequence. It will take a couple of hours, and you will feel like a real creator, in whose hands an ordinary polyurethane foam turns into real masterpieces of art.

Christmas tree

The master class on making a Christmas tree from polyurethane foam is quite simple and understandable. Pre-required prepare twigs to be fixed to the iron pipe. As a fixer, you can use tape or wire.

Then, using a spray gun, the workpiece is moistened, which will improve adhesive properties foam when applied to the substrate.

After that, we proceed to the processing of the structure with mounting foam, in this matter you can completely rely on your imagination.

Having at hand such affordable things as cutting sticks, twigs, mounting foam and fishing line, it will not be difficult for you to do it yourself Christmas tree. And to give a natural look, the Christmas tree can be painted. acrylic paint Green colour.

Ball

If you are afraid to take complex garden figures from polyurethane foam, then you can choose the simplest product, which is a ball. For those who do not have experience in making figures from polyurethane foam with their own hands for decorating a garden, it is recommended to take the first steps in creating this particular figure. And, having stuffed your hand, you can try to create more complex decorations and sculptures.

The master class itself includes the following actions:

first we need a paint can in which we need to pour sand;
then we take mounting foam and cover our blank in layers;
when the product is purchased required dimensions, A initial form changes to spherical, take a knife and cut off the excess parts;
we process our ball with varnish;
we complete the work on making the ball by coloring, for which you can use the colorful material that you like best.

Ram and sheep

A master class on the manufacture of this garden figure from polyurethane foam with our own hands begins with the creation of a frame. To do this, we need several plastic bottles that need to be connected to each other. with tape. As a result, the craft should resemble something like the “skeleton” of an animal. To give our figure more stability lower limbs can be filled with sand.

After that, you can begin to process the craft with foam. To avoid waste of material, it is recommended to wrap the frame with isolon or other polymeric material. After covering the figure with the first layer of mounting foam, it should already be clear to you what should happen upon completion of this work.

To create the ears, we use pieces of skin. You can also use plastic bottles for their manufacture, which will first have to be heated and bent.

To make a muzzle, you will have to use a knife, forming the necessary features with it.

To make our animals look beautiful, they need to varnish.

Goat

To make the frame, you will need a thick wire, which you need to wrap several plastic bottles around.

To make a frame for the legs, it is recommended to use metal pipes. They are attached to the pedestal by welding, after which they are fixed to the ground, or they can simply be bolted. Make sure that the base of the figure is firmly fixed, otherwise it will fall to the ground from wind or rain.

Then the craft is necessary cover with 1-2 layers of polyurethane foam.

To make the horns and tail, we take wooden shelves or use plastic cuts and attach them to the base.

Having finished applying the last layer, it is necessary to remove the excess parts, after which we wrap the product with a sickle or fishing line.

We finish the work with staining, but first you need to apply a layer of primer. When choosing a color, you can completely rely on your own preferences, because this is your creation and you can show all your imagination here.

We use buttons to make eyes.

Now our goat is ready and can be installed where you see fit - next to a pond, in a clearing, surrounded by other design elements.

Keep in mind that the process of making this craft will take you 1-2 weeks, since you will have to wait for a pause so that each layer of foam can harden. Thus, using orphan pipes, plastic bottles, pieces of wire and other debris and a couple of cylinders of foam, you can easily create beautiful decorative elements for your backyard.

New Year crafts

If you only have wire and a balloon of mounting foam at your disposal, then only with their help are you able to make beautiful New Year's decorations for the garden. These materials will be enough to make a variety of ornaments, Christmas decorations, as well as crafts of varying degrees of complexity.

A good idea is to create a snowflake. For it, you need to take a wire of a certain thickness so that you can easily bend it. It will serve as material for creating the frame of the future snowflake. We begin to cover it with 1-2 layers of foam. Immediately needed correct the shape, giving it a flat and smooth surface, and this must be done before the foam hardens. If any part of the figure turned out wrong, then at any time you can add a small amount of price and remove unnecessary parts with a clerical knife.

You will have even less difficulties when making a Christmas ball. The master class on the implementation of this idea will boil down to the following. For him, you need to take a tennis ball and apply a layer of foam. When the material hardens, we paint the craft, adding bright and positive colors to create a New Year's mood.

You can offer a simpler version of making a Christmas tree. It will require cardboard or isolon, which is wound on a rigid base, giving it the shape of a cone. You can easily apply a couple of layers of mounting foam. Next, it remains to give the craft a flat surface, paint and find a suitable place for the Christmas tree.

Conclusion

In order to make your backyard more attractive, it is not necessary to go to the store and buy special decorative ornaments. It is within the power of any owner of the site to make beautiful crafts for the garden on their own. Moreover, for this you can use the most affordable materials, one of which can be polyurethane foam.

It's easy enough to work with her., so even the owner, who has never had to deal with such a thing, can easily cope with this task. It is enough to study the master class on creating figures for the garden, and you will succeed.

Large garden sculptures look unusually beautiful and “status”. And everyone understands that in order to furnish the garden with even a few sculptures, you needed a lot of money .... What can we say when your garden is densely "populated" with different figures, wild animals and fairy-tale characters. And it's good that many are unaware: these figures are crafts made of polyurethane foam and made by your own hands ... and they are quite inexpensive!

Absolutely accessible to everyone, both financially and creatively. For this you need quite a bit.

Necessary materials for crafts from polyurethane foam

thin household gloves
foam gun
the actual mounting foam in the cylinder
sharp utility knife
Oil paint
thick brushes
polyurethane foam cleaner
putty
gauze bandages

After you buy everything you need and prepare workplace, you just have to decide what you will produce. You can start your own not with sculptures, but with decoration. It's a little easier, since you don't need to create a frame for the sculpture and do the calculations.

The most obvious is to decorate flower pot or a large vase. So you will not only learn how to properly dose the mounting foam, but also try to make various curly elements and patterns.

However, you can start simply with simple crafts. For example, Gingerbread Man from polyurethane foam or Mushrooms.

How to make a figurine from polyurethane foam with your own hands

The basis for the figurines can be found in any home: an old ball or ball for Kolobok and a plastic bottle for the mushroom. The main thing is to follow certain rules for working with mounting foam.

It is better not to save on foam. As practice shows, the cheaper the sample, the worse it keeps its shape.
Mounting foam is non-toxic, but, nevertheless, you can only work in a well-ventilated area or outdoors in dry weather. You need to work with gloves, because. mounting foam sticks to hands and is very difficult to clean. True, in some cases, when you need to correct the shape of the figure, you will have to work with your hands, after wetting them with water. But it is possible to “correct” the foam only when it is already slightly dry and a thin “crust” forms on it.
For work, use a special gun. If you just apply foam from a balloon, polyurethane foam figures will not work, because only a professional gun allows you to adjust the volume of extruded foam.
basis for foam sculptures you must certainly make it heavier, otherwise the product will turn out to be light and will not stand. As a weighting agent, it is best to use ordinary sand.
If your future sculpture should have “paws” or “tail”, you must first make a wire frame for them. And already apply the required amount of foam to the wire.
Mounting foam for crafts should be applied gradually, building up layer by layer. In this case, each layer must be allowed to dry. In time, it takes no more than 10-15 minutes.

You can cut out shapes or their elements from mounting foam. To do this, you only need a sharp clerical knife - it does an excellent job with foam. However, you can edit the figures only after they are completely dry.
After drying, it is imperative to putty the finished and dried figure. You can do this with tile adhesive. But then there is a risk that the sculpture will soon crack. Craftsmen advise using acrylic Supermastic paste with dry mortar or just acrylic putty. You can also lay the figure with gauze bandages soaked in a cement solution - they will perfectly protect the product from cracking.
Before painting, you need to let your foam sculpture dry for 3-4 days. Then paint with acrylic or oil paint in several layers, allowing each layer to dry properly. Spray paint for coloring foam crafts it is impossible, because it destroys the structure of the foam, as if "eats" it. For strength and shine, you can cover the figure with polyurethane varnish (for concrete floors).

You can safely put your crafts from polyurethane foam on the street. If everything is done according to the rules, neither rain nor sun are afraid of them. However, for the winter it is better to remove them somewhere indoors. Before the beginning holiday season, the sculptures are worth inspecting and restoring, if necessary: repair cracks (if they did appear), freshen up the paint.

How nice to surprise: friends, acquaintances, work colleagues or just neighbors with amazing crafts in your garden .. We will make a Frog from polyurethane foam!. Speaking about the frog, it will be green and smile slightly. As for the location of the frog, it will sit by the pool next to the Swamp, where it belongs.

So, you should immediately pay attention to the fact that any summer resident can make a Frog. Also note that the first attempts to make a frog may not be successful, because working with polyurethane foam requires skill and patience. The fact is that when the mounting foam dries, it slightly deforms and changes its design, so the initially made outline (silhouette) of the frog may differ from your expectations after a few hours, and this is how much the mounting foam dries.

Please note that the mounting foam dries for several hours, so do not rush to proceed to the next step until the foam is completely dry.

Required inventory

Cylinder of polyurethane foam;
Old bucket (Which we will douse with mounting foam);
Green paint, as well as the paint necessary for painting the eyes;
Wire;
Brush or color (for painting).

Step-by-step instructions for making a Frog

The next step is to paint our frog. But note that before painting, it should dry properly in a dry room for at least 2-3 days.

Please note that the frog can be seated either on or near the site. In conclusion, I would like to note that it is best to plant a frog under a canopy, because under the influence of water and wind, the mounting foam can deform, and the paint can begin to peel off.

Join our Vkontakte group or remember our website and stay up to date with interesting articles!