Decorative baguettes on the wall or ceiling, molding under the wallpaper or on them, gluing options in the kitchen, corridor. Options for non-standard use of a baguette in the interior How to glue baguettes to the ceiling and wallpaper

Baguettes on the ceiling are decorative plinths of different widths and appearance, which are used to aesthetically decorate the room and give it a harmonious look.

It is advisable to complete any repairs in the room with the installation of such skirting boards, because without them the ceiling joint with the wall will be ugly. The method of gluing baguettes is simple, but requires strict adherence to the instructions.

Properties and features of baguettes

Baguettes (other names: moldings, skirting boards, friezes, fillets) perform a number of practical and aesthetic functions. First of all, they are designed to elegantly design the transition from the wall surface to the ceiling. Also, baguettes perfectly mask small defects in walls and ceilings: drops, bumps, roughness. You can use baguettes with any type of finish: they are perfectly attached to concrete, putty, paint, wallpaper. The advantages of using skirting boards are obvious:

a large assortment in shape, color, size;
flexibility, the ability to bypass wall irregularities;
ease and speed of installation;
low price of most models;
used in all interior styles.

Calculating the required number of baguettes is very simple. It is necessary to measure the perimeter of the room and divide the figure by the length of one product (usually it is equal to two meters). The result should be rounded up and a couple of baseboards added for an unforeseen event, damage.

Types of baguettes

Depending on the material of execution, ceiling plinths are divided into the following types:

Foam. Polystyrene (polystyrene) is the cheapest and lightest material. Baguettes from it are attached to glue, putty and are securely held on the surface. Due to low moisture resistance, it is not recommended to use them in rooms with high humidity.
Polyurethane. These are expensive and high-quality baguettes. Polyurethane can be used in any operating conditions, it has a smooth surface, density, it can not be painted.
Gypsum. They are characterized by low moisture resistance and can be damaged by physical impact, but they are very beautiful, give the overall picture of the room an expensive look. Most often they are mounted in in public places, hotels, restaurants. For rooms with ceilings below 3 meters, the use of gypsum moldings is impractical.
Wooden. Lightweight baguettes can be attached with glue, heavier ones - only with self-tapping screws, screws. Wood products are allowed to be painted, they are resistant to mechanical damage, but are not suitable for the bathroom.
Plastic. This type of baguettes is not subject to staining, but practically does not react to humidity and can be installed in any room. Basically, plastic skirting boards are used complete with stretch ceilings.

For long narrow rooms a good option- wide baguettes. In a room with low ceilings, it is worth sticking thin skirting boards. For lush classic interiors large, pompous-looking stucco products are perfect, while for hi-tech and minimalism they buy modest white baguettes without relief and patterns. To make the walls taller, the baguette should match the color of the ceiling, and to visually lengthen the room, it is matched to the shade of the walls.

The choice of glue for a baguette

All compositions suitable for gluing can be divided into silicone, acrylic and polymer. First you need to purchase the skirting board itself and only then buy glue for it, because the composition should ideally match the finishing material. The cost of adhesives is varied, but there is no need to save too much: with low adhesion, the baguette will quickly come off, often this happens even during painting. Heavy fillets are additionally attached to self-tapping screws, the caps of which are then carefully covered and painted over.

Adhesive putty for plinth

The easiest way to use for gluing baguettes is the usual finishing putty or drywall finishing compounds, which often remain from the main repair. Acrylic mix, which is sold as a dry powder in bags, is best suited. This mounting method has a number of advantages:

quick adhesion to the base;
reliability, good adhesion;
savings (if putty was purchased for other work);
environmental friendliness of the composition;
no smell, the ability to apply without airing the room.

There are also disadvantages to using putty as an adhesive. Applying it in a very thin layer is quite inconvenient, because the baguette is narrow and long. Before use, each batch of dry mix will have to be diluted and the floor covered. The last point is related to the difficulty of removing dried material from any surface. With inaccurate application, pieces of putty can stick out from under the plinth, so you need to work carefully, without rushing.

Adhesives for special purposes: "Moment", "Titan"

Professional adhesives have a high viscosity and a sufficient degree of adhesion, do not spread and can hold heavy types of baguette. They are widely used by experienced craftsmen because they are easy to use, economical and dry very quickly.

Special adhesives also have disadvantages. Most of them contain solvents in the composition, so after gluing the baguettes there will be an unpleasant smell, and the room must be regularly ventilated. For brittle, thin foam that does not have polymer coating, such tools may not be suitable: they will spoil inner part plinth, dissolve it.

Liquid Nails

Glue of this type is perfectly combined with all types of ceiling baguettes. Due to the high adhesion and adhesion, liquid nails hold even heavy products on the ceiling without losing strength for many years. The skirting boards glued by them can be washed, repeatedly painted, the adhesion quality will not be disturbed.

For work with ceiling fillets, the following types of liquid nails are used:

Neoprene. Differ in moisture resistance therefore are recommended for work in damp rooms. The composition contains organic solvents, therefore they are harmful to health until completely dry and require regular airing of the room.
Acrylic. They are used only in dry rooms, because they are diluted with water and do not contain solvents. They are less resistant to the action of damaging factors, but they are considered environmentally friendly, they can be used even in children's institutions.

How to fix baguettes on the ceiling

There are two the right way gluing ceiling moldings. The first is attachment before wallpapering, the second is gluing directly to the surface of the wallpaper. The technology of carrying out the work, depending on the chosen method, will be different. In any case, before starting the installation of the baguette, you must wash your hands clean so as not to stain the snow-white products, and also take care of safety (put on a respirator, ensure the room is ventilated).

Surface preparation

If the base is clearly uneven, before gluing the fillets, it will have to be leveled with plaster, putty, which is especially important when working with gypsum and wooden skirting boards (they are less flexible). The closest attention is paid to the ceiling and walls in the corners: there all the irregularities after attaching the baguettes will become most noticeable. Minor Defects can be left unchanged, but then it is better to use polyurethane or polystyrene foam baguettes, which easily hide such shortcomings.

For puttying, a suitable dry mortar is purchased, a portion is diluted with water according to the instructions. Fill with a mass of recess. To give the wall a perfect evenness, a thin layer of putty is then applied over the entire area. Last layer make the finish by applying a fine-grained snow-white mixture and leveling the mass with a wide spatula. The ceiling is prepared in the same way (at least in the place where the baguette will come into contact with it). If the ceiling is even and painted, its preparation is not required.

It happens that the wallpaper is already pasted, and only the baguette needs to be changed. In this case, it is necessary to prime the areas that will be pasted over with a plinth, let the primer dry. After finishing the installation of the plinth, before painting, the part of the wallpaper in contact with it must be covered with masking tape so as not to mess it up.

For styling led strip it is recommended to make markings in advance, ensuring that the baguette does not fit tightly to the ceiling. Usually a line is drawn with a pencil 3 cm from the ceiling - the upper border of the baguette will pass along it. There is another marking option: drive in cloves at the right distance, pull a thread that you can navigate when installing the plinth.

Baguette preparation

Professionals immediately cut baguettes for convenience, then you do not have to be distracted by this process in the midst of work. But beginners should not do this, it is better to take all measurements and cuts directly during installation. If possible, baguettes are glued without joints, making them whole. Details in the corners (external and internal) are cut with a miter box, although experts often do this by eye.

Materials and tools

To work, you will need the required number of baguettes and glue, as well as some fixtures and tools:

brush or spatula for applying glue;
glue gun for liquid nails;
stationery knife;
miter box;
masking tape;
rags or wet wipes.

How to glue a polyurethane baguette

apply glue to the fillet (on a thin, light one - pointwise, on a heavier one - in several continuous lines);
wait the time specified in the instructions until some drying of the glue;
attach the part to the wall, press firmly with your palms, hold for a few seconds or minutes (depending on the type of glue);
moving further along the perimeter, each time accurately measuring the length of the next part, glue the plinth throughout the room.

After finishing the installation of the baguette, you need to let the glue dry completely, then putty the joints. Finished seams should be wiped with fine sandpaper, baguettes should be painted along the entire length.

Installation of wooden skirting boards

Typically, wooden baguettes are used for interior design in classic, eco and country styles. Such products look best with a wooden ceiling. They have a lot of advantages: environmental friendliness, attractiveness, resistance to mechanical damage. Usually, liquid nails are used to attach light wood baguettes, and work in this case is carried out in the same way as described above. Heavier products are fixed in a different way:

make a careful marking of the walls;
prepare the first baguette - cut it for a quality fit of the next one, measuring the angle in the miter box;
lubricate the wrong side with liquid nails for convenience;
apply a baguette to the wall;
securely holding the product, attach it with self-tapping screws, driving the hats as deep as possible;
fill the entire perimeter of the room with baguettes;
seal the caps of the self-tapping screws with wood putty, after drying, clean it with sandpaper;
the joints are also puttied, treated with sandpaper, varnished in the color of the baguette.

How to fix a pvc skirting board

Most often, such baguettes are used when decorating walls, ceilings. plastic panels in the kitchen, bathroom, veranda. Often they do come with panels in the kit, they have a special groove inside for fastening and are installed only at the moment of attaching the panels.

First, mount the frame under plastic trim, whose rail on the ceiling or wall will become the basis for baguettes. The latter are attached with staples or self-tapping screws directly to the frame, pre-measured to size and sawed with a hacksaw.

For the design of joints, corners, special connectors are used, which are put on glue for reliability. If the installation turned out to be inaccurate, and there are gaps between the skirting boards, they are smeared with transparent or white silicone sealant.

Fixing the ceiling plinth to the stretch ceiling

In this case, the baguette will close the junction of the wall and ceiling without being attached to the canvas. A small gap is left between the baseboard and the ceiling, or it is made larger for ease of installation of the backlight. The easiest way is to glue baguettes made of PVC, polyurethane or expanded polystyrene with a wide vertical side to the stretch ceiling. The only difference in the work will be that the glue is applied only to the vertical of the baguette, and the end in contact with the canvas remains clean. Otherwise, the technology is similar to that for attaching other types of baguettes.

The process of gluing the ceiling plinth

In each method of installing skirting boards, there are certain nuances and features that the master needs to take into account.

Skirting sticker over wallpaper

This method has to be applied if there is already wallpaper in the room, and only baguettes are to be replaced. The advantage is that they hide burrs, uneven edges of the wallpaper: all defects will be securely sealed. The technique also has a minus: if necessary, change the wallpaper, you will also have to tear off the ceiling plinth.

The order of work is as follows:

cut the ends of the baguettes with a miter box;
miss reverse side skirting boards with glue;
attach the product to the wall, adjusting to the ceiling;
press, hold as much as indicated in the instructions;
remove excess glue with a damp cloth;
glue the top of the wallpaper with masking tape;
seal the joints of the skirting boards with sealant, putty, completely paint the products.

Fixing the skirting board before wallpapering

The difference between this technique is that at first the baguettes are glued to the ceiling, then all seams and gaps are sealed with putty, sealant, and only after that they proceed to the final decoration of the walls with wallpaper. In order for the wallpaper line to be perfectly even, they are glued with a margin, and then carefully cut off with a sharp knife strictly under the baguettes.

Installation of skirting boards in corner joints

Docking baguettes in the corners is the most difficult stage of work. The overall appearance of the room, especially the ceiling, will depend on the quality of the trimming of the products. To cut the skirting boards, you will need a miter box, which you should practice with in advance on small unnecessary pieces. The plinth must be placed in the miter box as it will be located on the ceiling, the lower part should be pressed against the side of the tool. Make a cut to make a 45 degree angle. This is true for a room with even right angles (90 degrees). If the angle is not straight, it is adjusted to the desired value with a sharp knife by hand. Do not allow the appearance of burrs or immediately carefully cut them with a knife.

You need to glue the fillets in the corners like this:

lay the products together on the floor, check the accuracy of the joints;
cut with a knife interfering areas, if necessary;
grease the skirting boards with glue, attach them in turn to the wall surface;
press, withstand the prescribed time until the glue dries.

Baguette mounting technology

Depending on the type of skirting boards, there are a number of nuances that must be taken into account during installation.

Lightweight foam models

If there is concern that the plinth will not hold between the wall and the surface, and the base is defective, it is recommended to use expanded polystyrene models. They are so easy to work with that when gluing on the wallpaper, the base does not require any preliminary preparation at all.

Instructions for using light skirting boards:

mark the wall with a pencil, marking the bottom edge of the fillet;
take the details, cut them according to the size of the walls;
for cutting at the corners, use a miter box, a sharp knife, a special file for polystyrene;
in the absence of experience, you can draw the required angle on cardboard, and then apply it to the end of the product before cutting;
grease the back of the baguette with glue, let it dry a little;
attach the part to the wallpaper, aligning it along the drawn line;
immediately remove excess adhesive with a rag;
press well, fix the fillet;
glue all the remaining parts.

Heavy polymer products

Sometimes relief baguettes made of gypsum, polyurethane are attached between the wall and the ceiling. It is undesirable to glue them on the wallpaper, because the latter may not withstand such a heavy "burden". Therefore, the order of work will be somewhat different:

cut parts, including corners;
draw a line on the wall along which the lower edge of the plinth will pass;
slightly above this line (by 1-1.5 mm), with a sharp knife, cut through the wallpaper to the full thickness;
if the wallpaper is set under stretch ceiling, 0.5 cm below its level, also make an incision;
pry off the cut-out strip of wallpaper with a spatula, remove it (if necessary, additionally sprinkle the wallpaper with water);
it is good to clean the wall of paper residues and other contaminants, prime it;
stick the plinth in the standard way.

Wooden structures

Wood products are even heavier, so they need to be fixed much more reliably. Fragments of skirting boards are cut with a hacksaw according to the size of the walls, in the corners - by 45 degrees. The ends are sanded with sandpaper so that the joints are neat. Next, they make markings according to the width of the plinth around the entire perimeter of the room and drill the details with self-tapping screws, deeply sinking the hats.

Additionally, you can use gluing on liquid nails so that the baguettes are held on the wall and do not change position during drilling. After the skirting boards are sanded, puttied, varnished or painted.

How to glue gypsum baguettes on the ceiling

The procedure for working with such skirting boards will be similar to the previous options. The only difference is that the gypsum fillets are placed on a thick layer of gypsum-based finishing putty. The rest of the mass is removed with a spatula. It is important to cut the corners and ends very evenly, avoiding the appearance of notches, they will greatly spoil appearance finishes.

Over time, any skirting boards, even the most expensive ones, can turn yellow. Therefore, it is recommended to paint them in order to give a more aesthetic appearance, and also to hide all joints and defects for sure. So baguettes will look beautiful and last longer without requiring replacement during each repair.

Nothing makes the transition from the wall to the ceiling of a building more aesthetic than an exquisite frame made of aesthetically pleasing and practical plastic. The question of how to glue a plastic baguette is relevant and, if necessary, hide small imperfections after repair. The presence of such an interior detail opens up additional opportunities for improving the appearance of the room.

More practical than wood. This material is easier to clean and retains a presentable appearance longer without additional care. Plastic edging is much lighter in weight, so the installation of its design is technically easier. In addition, the price of plastic as a baguette material is significantly lower. This is especially important if ceiling frames are purchased for finishing office or public premises, and it is desirable to save on materials.

Stages and features of gluing plastic baguettes

The traditional technology for gluing a baguette frame for a ceiling includes several steps. This:

Preparing the surface for gluing.
Carrying out the necessary calculations.
cut desired length baguette blank.
Direct installation.

The technical nuances of baguette gluing may vary depending on the type of surface. If the baguette frame is glued to the wallpaper, it is necessary to apply a smaller amount of adhesive to avoid spots and softening of the wallpaper. When gluing under a stretch ceiling, it is best to attach the interior frame to the wall so as not to damage the delicate surface of the ceiling. Most practical option a baguette for most of these structures is a ceiling plinth.

In order for the baguette edging to hold securely and look flawless, installation must be performed correctly at all stages of work.

Surface preparation

The first step in gluing the baguette edging is to prepare the work surface. Before gluing the decorative panel, the surface must be well cleaned of dust, remnants of the old coating (paint, wallpaper, whitewash) and any gaps should be leveled with priming. In many cases, additional puttying is required.

The main task preparatory phase- increase in the bearing capacity of the surface on which the baguette panel will be held. Applying a coat of primer will greatly improve the adhesiveness, or adhesion. If you properly prepare the wall before gluing plastic baguettes, this will save a lot of adhesive consumption with excellent fixation of the frame.

Calculations and markup

If each corner of the working room is exactly 90 0, a standard cut with a miter box is sufficient. Markup work becomes more complicated if the task of the baguette panel is to hide the flaws of the room at the junction of the ceiling and walls. To calculate the required amount of material and markup in a room with non-standard angles, you need to attach a piece of baguette to the corner between the ceiling and the wall, and then draw lines along the bottom and top of the piece.

The main value to be guided by in this case is the intersection of solid lines on different sides of the corner. These places are indicated by marks on the baguette opposite the straight lines. The accuracy and aesthetics of the joints are important indicators of the quality of gluing.

Cut piece of baguette

To separate the desired part of the material for the decorative panel, you can use a plastic hacksaw or a knife with special blades.

After the necessary pieces are cut off, it is necessary to check the accuracy of the angle by folding two parts according to the marks drawn earlier (inner and outer corners). The slightest inaccuracy should be “smoothed out” with sandpaper or a knife, otherwise a gap may form. Also suitable for this purpose electric jigsaw, especially when working with "curly", three-dimensional panels.

It is also possible to cut baguette blanks when fastening, but it is much more difficult, time-consuming and effort-consuming. Therefore, it is better to glue pieces that fit perfectly to each other, and not to engage in correction during installation.

Installation nuances

It is best to start gluing the baguette edging from the corners of the room - this is the basic and most painstaking work. Straight details required size much easier to stick. When applying glue to the edges of the blanks, it is necessary to ensure that its excess protrudes outward. The more uniform the layer of applied adhesive, the better the plastic will “grab”. The surplus that comes out is evenly distributed along the edges with a brush, and the remnants are washed off with warm water and soap or solvent.

When the panels are already glued, you need to pay attention to the processing of the joints. They are lightly puttied and polished with sandpaper. After grinding and drying of the glue, if necessary, you can paint the mounted baguette.

The choice of glue for the baguette panel

How to glue a plastic baguette selected from the rich collection of the ART-BAGET online store? Many experts recommend using "liquid nails" for this purpose - a special construction adhesive that is designed for any weight of parts. "Liquid nails" are made on a neoprene or water basis. This adhesive is universally compatible with different surfaces. It is preferable to apply it with a gun.

Other options are glue "Dragon", "Moment", Bostik Vinycol 1520, "Khimkontakt-Desmokol" based on organic resin, specially designed for soft plastic "Second Vinyl". Regardless of which glue you prefer, you need to avoid getting it on the outside of the baguette.

Easy sticking and excellent results!

Reading time ≈ 3 minutes

A baguette is a plank for framing paintings, photographs, mirrors. It is also used as wall and ceiling decoration. This decor item can be single or consist of several elements, which makes it possible to apply different kinds ornaments.

In construction (depending on the purpose of use), baguettes are divided into decorative and fixing. Let us dwell in more detail on the use of decorative baguettes in interiors.

Even in ancient times, in temples, palaces and houses of wealthy people, mosaic drawings on the walls and ceilings were framed with a decorative baguette. To date, the use of a baguette in the interior of an apartment or house is not a luxury. Designers often use it to decorate interior elements and give the room a personality. Baguettes are made from various materials. It could be:

gypsum;
plastic;
tree;
aluminum;
polyurethane.

The price depends on the quality of the baguette and the material from which it is made. With such an abundance, the flight of fancy is simply limitless. Consider several ways how you can organically use a decorative baguette in the interior.

Mirror decoration

Most often you can find mirrors in a baguette. In the interior of any home, this is the easiest way to decorate. As you can see in the photo, the size of the mirrors is different, there are thousands of variations, so anyone can afford this type of decor. To give the interior gloss and high cost, massive frames made of expensive woods are used, the baguette is covered with gold leaf.

Making mirrors with a plastic baguette is the most affordable. To date, their color range is very wide, which allows you to choose the color and texture for the most bright interior. Mirrors in an aluminum baguette are most often found in the interior of bathrooms.

Recently, decorating with a baguette of paintings, engravings, tapestries, photographs is gaining popularity. This process is similar to decorating mirrors. The materials from which a baguette is made for such decor are practically the same.

Ceiling decoration

A special place is occupied by the use of a ceiling baguette in the interior. Today, a baguette instead of a plinth in the interior can be found enough. Also, this element of decor replaced the classic ceiling cornices and slats.

The most commonly used ceiling baguette made of polyurethane. Such material is produced in various widths and has a different relief. You can paint it in any color. It is very easy to install, attached to silicone glue or alabaster.

Gypsum baguettes, when decorating the ceiling, are used less often. They are more fragile, expensive, heavy. However, they also have their advantages - the compositions of gypsum baguettes look richer and more massive.

The most expensive is the baguette natural wood. It is used in the design wooden ceilings. He became very popular in country houses, because they try to use only natural materials in their decoration.

Modern designers often experiment with decorative elements, using them in the most unusual manifestations. So, the classic ceiling baguette, which is usually used to decorate the edges of the wallpaper, is now also used for wall decoration. Profiles are used as frames or to distinguish between two types of wallpaper. They look very original and bring fresh notes even to the most modest and discreet interior.

The lineup

All decorative baguettes for walls can be divided into several types:

wooden;
plastic;
aluminum.

The most convenient in the work is considered a wooden profile. It does not crack when fastened, ennobles, emphasizing the aristocratic taste of the owners. Plastic baguettes for walls are considered a budget option, but this does not make them less in demand. They usually have a wide palette of shades, and the relief is more complex and multifaceted. As for aluminum baguettes, they are ideal for modern interiors. The metallic gloss of the frames goes well with the chrome elements and the cold shine of the plasma TV.

Decorative baguette for walls in the interior

So, in what cases will this element be appropriate? There are several generic options:

Highlighting a specific area on the wall. This may be a place where a clock hangs or several photographs in strict frames. The baguette will draw attention to what is in the central part and slightly enliven the design of the room.
. If you want to pay attention to a niche in the wall, then trim its edges with a contrasting baguette. You can also frame the inside, complementing it all with lighting. It looks romantic and a little mysterious.
Wallpaper combination. To smooth the border between two types of wallpaper at the joints, you can glue frames. Thanks to this, the transition will be less noticeable, and the design itself will be more harmonious.
Mirror frame. The most ordinary mirror without a frame will become bright and attractive with a ceiling baguette. Paste it around the perimeter around the product and your interior will instantly change.

When using baguettes for wallpaper on the wall, it is also recommended to pay attention to its texture and color. If you are framing a picture, lamps or a mirror, then it is better to use classic panels without bends and carved details. For wallpaper decor, more elegant models with imitation of stucco or rich color are suitable.

With the help of a baguette, geometry is emphasized, which can be very diverse.

If earlier the joints between the walls and the ceiling were covered with a panel or a strip of embossed paper, now the curvature smooths out the baguette or baseboard better. It gives the room a unique look, hides some mistakes during repair work. This article will tell you how to glue baguettes, how to cut them and mount them in corners.

Features of use

Sticker. How to attach a baguette

When installing ceiling plinths, there are several of their advantages:

Ceiling baguette hides visible defects:

small irregularities;
some roughness;
grade fluctuations.

Decorates.
Simple and easy to install, no special skills required.
The material is lightweight and sometimes flexible.
Wide design choice.
Affordable price.

Tip: Before gluing, you need to know what are used to make them. various materials. Products come in different textures, widths, smooth or patterned. This affects the cost, purpose and application features for different interiors.

For the manufacture of molding, ceiling plinth or frieze, are used:

Styrofoam.
Gypsum.

The most popular products are made of foam and polyurethane. As for plastic products, they are used only for stretch and PVC panel ceilings. Wooden baguettes - with a wooden structure device.

What glue is used for mounting

Before gluing ceiling moldings, you need to think about adhesive composition. For each master, during installation, there is a glue that has been tested in the work.

He can be:

Polymeric. Such a composition has a weak adhesion. In order to glue a foam baguette with polymer glue, it will need to be held in the required position sufficiently long time, which is not very convenient for a two-meter product.
Acrylic.
Based on silicone.

Acrylic and silicone adhesives allow you to quickly and conveniently mount the ceiling plinth. They go on sale in tubes for a pistol. The composition is applied quite easily, and the diameter of the outlet nozzle controls its consumption.

How to glue a ceiling baguette with one or another composition, the attached to the material will tell you detailed instructions. The disadvantage of such adhesives is high price, this is especially noticeable when performing work in big apartment or home.

Note: The cheapest do-it-yourself gluing option is regular finishing putty or a drywall adhesive if used during repairs. Such a composition is more reliable, hardens faster, which allows you to paint the ceiling and baguettes in half an hour, without fear of damaging them with a roller.

The disadvantage of using putty as an adhesive is the lack of convenience when working with it. It is not very convenient to apply such building mixtures with a spatula in a thin layer on a baguette.

After gluing, the remaining putty or drywall adhesive will need to be carefully removed with a wet brush. Otherwise, clots of dry mixtures will become visible from under the paint.

How to glue the skirting board on the ceiling

Tip: Installation of the plinth should be started from any corner of the room.

Ceiling baguette can be attached in two ways:

over wallpaper.
Before wallpapering the walls.

Tip: Usually baguettes have White color therefore, before work, it is imperative to wash your hands well with soap and water to prevent contamination of products. Or, you need to work in clean gloves.

The gluing process is quite simple, but problems arise with trimming corners.

The subtleties of the technology of work:

Particular attention should be paid to cleaning the ceiling and walls from the presence of traces of glue. Acrylic and silicone compounds are removed with a rubber spatula and a damp cloth. When sticking a baguette on putty, the excess is removed with a small brush, well moistened with water.
All gaps between the baguette, ceiling and walls must be carefully filled with glue. The same should be done with the connections in the corners of the ceiling plinth.

Tip: You can’t expect that such cracks can be masked with paint or gluing wallpaper on the ceiling, this will not work. The glue smeared on the ceiling and walls must be carefully removed, as shown in the photo.

When joining straight sections, often when the glue dries, the edge of the baguette floats down and a step is formed. To avoid this, the joint of two adjacent skirting boards must be chipped in the desired position with needles, or fixed with masking tape.
After the glue dries, the needles are removed, and the resulting small holes and dents are carefully covered with the same glue or putty.
Baguettes are painted several times. The first layer - primer, allows you to hide all putty joints, and all other decorative layers are performed simultaneously with painting the ceiling. Finally, the excess glue on the baguette is cut off.

How to glue baguettes on wallpaper

Work procedure:

On the surface of the baguette, which are adjacent to the ceiling and wall, a thin layer of glue is applied.
The plank is applied to the wall and held according to the instructions for the adhesive.
Excess glue is removed with a clean rag or sponge.
All joints are carefully sealed with white sealant.
If necessary, the entire surface is painted with acrylic or water-based paint.

Tip: Painting the ceiling cornices should be carried out very carefully so as not to damage the glued wallpaper. It is best to do this before installation.

The main advantage of this method is that there is no need to adjust the wallpaper to fit the baguette. Framing will hide all existing burrs, distortions in the upper part of the wallpaper.

How a baguette is attached before wallpapering

This option can be found quite often. It is preferred by many professionals.

The order of work is as follows:

The walls and ceiling are carefully prepared, the surfaces are leveled with putty.
With the help of a miter box, the ends are cut.
A baguette is attached to the putty or drywall adhesive.
All the gaps formed between the baguettes, the ceiling and the walls are rubbed with putty.
Excess material is removed with a clean rag.
Subsequent work is stopped until the putty dries.
All surfaces are primed.
Painted in selected color.
Wallpaper is glued. At the same time, the overlap in the upper part is removed by applying a spatula and cutting off the excess with a clerical knife.

Tip: Painting a baguette with the same color as the ceiling gives the visual effect of a monolithic structure.

The main advantage of this method is that all defects are easy to fix, the frieze is painted at the installation site, and there is no fear of damaging the wallpaper.

How to glue a baguette in the corners

Preparing corners and joints is the most difficult and painstaking job of installing a frieze on the ceiling.

For work you will need:

Small spatula.
Sealant or putty in a suitable container.
Miter box.
Stationery knife or hacksaw.

Tip: Fitting the last plank should be done by cutting out the corner to avoid damage to the material when an error occurs.

For the correct trimming of the ceiling plinth in the corners, you must follow some rules.

If in the room all the angles are even and make up 90˚, then:

Right angles should be all:

between adjacent walls to each other;
between walls and ceiling.

Only in this case it will be possible to carefully cut the corners with the help of a miter box.

With the help of a miter box, the ceiling plinths joined in the corner are first cut.
Their ends are brought to the right sizes ordinary construction blade.
The gap is evenly distributed over the two lengths of friezes to prevent tooth defects.

Order of cutting corners:

In the absence of work experience, it is better to practice using small pieces of fillets.
The plank in the miter box is placed in such a way as it will be located on the wall.
The lower part of the baguette is tightly pressed against the wall of the miter box.

How baguettes are glued to the corners

The order of work is as follows:

The end is cut at the desired angle. For this, a knife or a saw is used; strong pressure on the surface of the baguette cannot be done, this can crumble the material. Typically the angle is 45°.
The cut edges are applied to each other.
The absence of gaps is controlled.
With a knife, if necessary, interfering parts are cut.
Fillets are applied to the installation site.
The final adjustment of the elements is in progress.
Parts are being installed.

The corners of the ceiling plinth are glued, as indicated on the product label, in the same way as the main profile. For those who are interested in gluing baguettes to the ceiling, the video presented in this article shows in detail the entire process from start to finish. After mounting the baguettes, you can give them an original decorative look using spray paint.