Producer brand polar bear. Hydrangea paniculata Polar bir: a polar bear in the garden. Use in landscape design

In 2013, a new unique variety of hydrangea appeared, surprising with its beauty and vitality even in the most severe frosts. Paniculata hydrangea Polar Beer was bred by Dutch gardeners-breeders. It is based on such well-known varieties of hydrangeas as the exquisite Grandiflora and the majestic Limelight. "Polar Bear" adopted them best qualities, having managed to quickly gain popularity among flower growers.

Hydrangea paniculata Polar Bear is a lush evergreen shrub up to 2 m tall, 1.5 m in diameter. Sometimes the shape may be more like a tree than a bush. The root system, like that of other representatives, is horizontal: the roots lie shallow under the surface of the earth and grow in breadth, and not in depth. Often the boundary of their distribution lies beyond the diameter of the crown. The branches of the plant are thick and stiff, but not prone to breaking off. The leaves are ovoid, about 10 cm long, bright green in color. The leaf arrangement is opposite: the leaves on the shoots grow in pairs opposite each other.

Description of inflorescences of hydrangea varieties Polar Beer: large, paniculate, cone-shaped, reach 40 cm in length and 30 cm in diameter. They grow evenly in the crown, which gives them the effect of light clouds. They are located on strong branches, which prevents them from breaking off, unlike the inflorescences of one of their "parents" - Grandiflora . There are two types of flowers on the inflorescence: fertile and sterile. Fruiting flowers are small, almost imperceptible, white color. They quickly fade and fall off. Infertile flowers are large, reach 3 cm in diameter, have 4 petals, are located close to each other on the inflorescence. Blooming in July, have a rich pistachio color. Toward the end of summer, it changes to white, a little later - to cream, and at the end of September it acquires a pinkish tint. Hydrangea usually blooms by early November.

The result of crossing two varieties, this hydrangea has inherited the best qualities of both. So, from Limelight, the "Polar Bear" inherited its vitality: the rigidity of trunks and branches, resistance to various kinds of pests, and even increased its extreme frost resistance. From Grandiflora, he inherited large and lush inflorescences.

"Polar Beer" is able to withstand temperatures down to -40 °C!

Due to its frost resistance, it is suitable for cultivation not only throughout Europe and in middle lane Russia, but even in such cold places as Siberia or the Urals.

Successfully used in apiaries as a honey plant.

Landing

In order for the plant to live for many years, not to freeze, and every year to please with the splendor of flowering, it is important to choose optimal location and time for planting a young seedling. It is also necessary to choose the right fertilizers.

Hydrangea loves moisture, so you should not plant it near trees that absorb water. When choosing a planting site, soil moisture must be taken into account. It is best to plant the plant in the shade, because Polar Beer is not a heat-loving plant.

Choice of time and place

Young plants of this variety are usually planted in the ground in autumn in warm climates or in early spring at colder. At autumn planting time needs to be guessed so that the plant has time to take root in a new place, but does not begin to grow, because in this case, the beginning frosts will destroy the young hydrangea. In such a situation, it is recommended to carefully insulate the "Bear" for the winter.

For planting paniculate hydrangea, semi-shady places are selected, illumination by direct sunbeams which does not exceed 6-8 hours. Excessive amount sunlight can cause problems with Polar Bear flowering.

For any variety of hydrangea, it is preferable to choose acidic or neutral, moderately moist soil.. The optimum pH level is around 5.5 - 6.0. Chernozem, loam, sandy loam is suitable for planting. The polar bear does not tolerate alkaline soils well, so they need to be acidified: this can be done using chemicals like ferrous sulfate, ammonium sulfate, or natural materials. For this purpose, peat or coniferous bedding is well suited.

The polar bear does not tolerate cold spring drafts, since the sap flow of this plant begins very early and there is a possibility of freezing of individual branches or even a whole bush. When choosing a landing site, you should make sure that there are none.

Planting process

For planting a seedling, the land must be prepared in advance. To do this, first of all, a hole is dug out with dimensions approximately corresponding to the area of \u200b\u200bthe root system of the seedling, usually about 40 * 40 * 40 cm, and watered abundantly. It is recommended to pour about 30 liters of water into the hole so that the soil is properly saturated. The hole is left overnight. During this time, water is absorbed and evenly distributed in the ground.

The next morning falls asleep in the hole fertile soil mixed with organic and mineral fertilizers. It is recommended to use soil, peat, sand and humus in a ratio of 2:2:1:1. Top dressing is added to the resulting mixture. When planting, it is recommended to use mixtures with potassium, urea (urea) and superphosphate.

A well-mixed soil mixture is poured into a moist hole in a "slide" so that there is room for planting a seedling.

The seedling is placed on a “hill”, the roots are gently straightened, after which they are sprinkled with the remaining soil mixture. The root neck does not deepen or does not deepen by more than 1–2 cm, otherwise it may begin to rot. The soil around the trunks is carefully compacted.

After planting, the hydrangea must be watered. Water is needed so much that it penetrates to the bottom of the former hole and properly saturates the entire soil mixture. 8 - 10 liters is usually sufficient.

To retain moisture after planting, it is advisable to mulch the ground in the near-stem zone. This should be done with sawdust, peat or tree bark. The ground is covered with them to the height of the thumb, about 9–11 cm in a radius around the trunks. After planting, young bushes are recommended to be covered from strong wind and direct sunlight.

If hydrangeas are planted in a row, it is recommended to keep the distance between individual bushes at least 1 m, and ideally 1.5–2 m. It is recommended to maintain a distance of 2–3 m from large bushes of other plant or tree species.

For the first time paniculate hydrangea bushes bloom 2-4 years after planting. If inflorescences are formed in the first year, they are recommended to be cut. So the plant will direct all the energy to the development of the root system and branches, which will provide more large size inflorescences in the future.

reproduction

Like any other plant, "Polar Bear" breeds different ways:

dividing the bush;
cuttings;
seeds;
layering.

Gardeners most often use the method of dividing an adult bush or cuttings. Other methods are less popular.

cuttings

The optimal time for cutting cuttings is the beginning of summer, June. At this time they are most viable. Usually they are cut so that 4 internodes remain on the handle. Sometimes they use the twigs left after the spring pruning of the bush.

Immediately after pruning, the cuttings are placed in water for 2-4 days. Their sections can be treated with a growth stimulator. Then the cuttings are planted in fertile fertilized soil. Here you can use the same soil mixture in which the seedlings are installed, or you can prepare another one: mix peat or humus and sand in a 1: 1 ratio, and then add mineral fertilizers. The soil mixture is watered abundantly, and the pot is covered with a cap or a special film to create a greenhouse effect. Humidity is an important component for the development of cuttings.

The cover from the pot must be removed from time to time to ventilate the small plant. Watering the soil too often should not be done - it is recommended to do this only as needed. IN open ground cuttings can be planted after two years. Usually, about 4–5 years pass from the moment the cutting is cut to the first flowering of the Bear.

The division of the bush

An adult hydrangea bush is undermined from one side.
Several trunks are carefully separated from the plant along with a piece of soil with part of the root system.
Delenka is planted in a prepared hole, sprinkled with soil mixture, watered and mulched.

Care

Caring for the "Polar Bear" is not difficult if all the rules were taken into account when planting a seedling. It includes regular watering of the plant, fertilizer, mulching and pruning.

In addition, hydrangea needs to warm the roots for the winter. This can be done by laying out peat fertilizer mixed with leaves.

Watering

This variety of hydrangea is quite moisture-loving, so the Polar Bear should be watered regularly. Watering is carried out in the region of the near-stem circle, every 3–5 waterings it is recommended to add potassium permanganate to the water: about 2–3 g per 10 liters of water. It is an antifungal agent, prevents the formation of rot, and also serves as an additional plant nutrition. Watering is usually carried out during a relatively cool time of day, usually in the morning or evening.

In a temperate, cool summer, it is enough to water the hydrangea once every one and a half weeks, pouring from 15 to 30 liters of water under the bush, depending on the amount of precipitation during this period and the size of the bush.

In hot summer conditions, watering should be carried out more often: 2-3 times a week for 15-20 liters.

If the summer is rather cool and rainy, you can reduce watering to 4-5 times for the entire season. It is necessary to pay special attention to watering in the fall, since the lack of moisture during this period can lead to a decrease in the winter hardiness of the plant.

Fertilizer

As a rule, hydrangea requires top dressing only in the second or third year after planting, when it begins to bloom.

Experienced gardeners have noticed that the brightness of hydrangea flowers directly depends on the acidity of the soil. The more acidic the soil, the brighter the color of the flowers of the paniculate hydrangea. Therefore, the following rule was derived: until July, during the period of budding and the beginning of flowering, acidifiers such as potassium or ammonium sulfates are used as fertilizers, and from July to the end of October, potassium-phosphorus fertilizers are used.

In May, the first plant feeding of the year is carried out. It must be complex in order to give strength to a plant that has weakened after winter. For these purposes, it is recommended to use special complex mineral fertilizers diluted in water. Usually 20–40 g of fertilizer per 10 liters of water is sufficient. This procedure is recommended to be carried out twice: the second time approximately two weeks after the first. This top dressing can be supported by laying organic fertilizers.

In early-mid June, “sour” top dressing is carried out, aimed at improving the flowering of the “Polar Bear”. The time is chosen two weeks before flowering, during the laying of buds. For this top dressing, potassium or ammonium sulfate (about 45 g) and superphosphate (about 70 g) are mixed. You can also add some urea. Fertilizers are diluted in 15-30 liters of water.

In order to prolong the flowering of hydrangeas and ensure a good laying of flower buds for the next year, it is recommended to repeat the “sour” feeding procedure in mid-late July.

The last stage of feeding the plant occurs in mid-autumn. It should help to accumulate enough nutrient material for the plant for the whole winter. Here it is recommended to use special fertilizers for hydrangeas. If these could not be found, fertilizers for rhododendron are also well suited, since their growth conditions are similar to those for hydrangeas.

Ash, chalk, dolomite (limestone) flour cannot be used as a fertilizer for hydrangea, as they are soil deoxidizers and will only harm the plant!

pruning

There are two types of panicle hydrangea pruning. They are suitable for two purposes:

1. Pruning for the purpose of thinning the bush.
2. Trimming for the purpose of rejuvenation.

In order to thin out the bush, pruning of the paniculate hydrangea is carried out only for 3-4 years of the plant's life, when it has grown sufficiently (with the exception of the removal of frozen twigs - this procedure is performed annually).

Pruned twice a year: in March and before the onset of cold weather. In the spring, all frozen branches are removed to the first living bud, and weak last year's shoots are completely cut off. The main 5–10 shoots are cut off by two thirds (up to 3–5 buds from the ground).

At the end of autumn, pruning is done to prevent branches from breaking off under the weight of snow or ice. Only browned inflorescences and, if necessary, strongly protruding young shoots are cut off.

If the hydrangea is not cut off, the inflorescences will grow smaller every year, and excessive thickening of the bush will lead to a lack of oxygen and light for individual shoots, which, in turn, can provoke various plant diseases.

For the purpose of rejuvenation, old plants are pruned in the spring. All old trunks are removed "under the stump", only young shoots are left. In 1-2 years they will grow and the hydrangea will again acquire a presentable appearance.

Warming for the winter

Since Polar Beer is an extremely frost-resistant variety of hydrangea, it does not require special measures to prepare for winter. It is enough to insulate the roots. To do this, the ground within the near-stem circle is mulched. Sawdust, dry grass, spruce or pine spruce branches, leaves or peat are laid in a layer of 15–20 cm.

In landscape design

Hydrangea can be planted in a variety of ways: as a single plant, as a kind of hedge, or in combination with other plants. With an effective landing, the height of the Polar Bira can reach more than 1.5 m.

Hydrangea "Polar Beer" in landscape design good for many reasons. It is malleable to create various shapes: if desired, it can be cut to look like a small tree or a neat ball. Polar Bear looks great as a center plant in small garden, as a zone separator plant for large gardens. With a dense planting of bushes to each other with this variety of hydrangea, you can achieve the effect of an uncut hedge.

The evergreen corner of the garden, the center of which is Polar Beer, looks very beautiful. Together with him, you can use low shrubs of rhododendrons and creeping perennials there.

Variety: Polar Beer ( polar bear)

To imagine what the Polar Beer hydrangea looks like, a photo is not necessary - just translate the name into Russian. Polar Bear - Polar Bear. Imagination will immediately give the right clue - large, strong, hardy. And, of course, in a luxurious white fur coat.

Characteristics

A magnificent variety, new, but already one of the most sought after on today's market. Height about two meters, width a little more. The crown is regular, rounded, medium spreading. Evenly filled, without voids, developed symmetrically from both the sunny and shady sides. This applies not only to foliage, but also to inflorescences. What is especially appreciated in landscape design: from whatever point you look, the bush is showered with flowers from top to bottom.

The leaves are opposite, simple, oblong, deep green in color. Rough, with stronger pubescence along the veins on the underside. They do not change their color in autumn.

Most often, gardeners, intending to buy Polar Beer hydrangea in a nursery or an online store, ask: judging by the name, is it frost-resistant? Yes, for cultivation in Moscow - more than. The Polar Bear hibernates without shelter, even those branches that are on top of a snowdrift can withstand minus forty. If the winter happens to be abnormally harsh, only the tips will be beaten, which are still subject to pruning.

Gas resistance is beyond praise: even in summer Moscow overloaded with transport, Polar Beer hydrangea looks fresh, grows vigorously and forms buds. They open in July and delight until frost.

Excellent, stable honey plant, can be grown near apiaries. The honey spirit attracts bees, bumblebees and butterflies, and they willingly fly to wallow in silky petals.

decorative

The blooms are great! Wide-round-conical, so long that they do not fit on the arm from the elbow to the fingertips. At first openwork, with a pale green top. Soon fertile flowers hide under a mass of large sterile ones with rounded petals. Panicles change from greenish to creamy and even plumper. In August, they are touched by a gentle pink blush.

Snow-white brushes keep freshness in a vase for a long time. They can be dried for winter bouquets. This is not difficult: the inflorescences are hung by the petiole where it is gloomy, dry and drafty, for example, in the attic.

Looks good both in solo plantings and in groups. Gets along with most ornamental plants, deciduous and coniferous. Under the crown, low perennials can be planted.

Like the real owner of the Arctic, the White Bear hydrangea gravitates towards water. It is beautiful near a reservoir - whether it be a pond, a fountain or any other source of life-giving moisture.

Paniculata hydrangea Polar Bear is a long-lived shrub. He will spend more than 50 years in your garden, so look for a place with all diligence. Basic landing rules:

placed under protection from the wind, in a sunny or slightly shady area with rich soils;
provide an acidic soil reaction by introducing peat and / or coniferous soil;
think over the method of watering - hydrangia are very greedy for water.

There must be a margin of space around the stem with a radius of at least a meter. Very soon, Hydrangea paniculata Polar Bear will turn from a seedling into an adult bush, and this variety does not like crowding.

Landing

Shrub tolerant of high levels ground water- the roots lie shallow and almost horizontal. Hence one of the main rules for planting paniculate hydrangeas: the pit is prepared shallow, but spacious in diameter (usually it is equal to twice the depth).

The process of planting seedlings with a lump is not difficult. The only feature: both the earth in the container and the hole are saturated with moisture to the maximum. The trunk circle is mulched, the seedling is first fixed with a peg. Having got stronger, your "bear cub" will hold itself, and hold the whole mass of flowers, without needing support.

Care

If you bought the Polar Beer hydrangea in our garden center, you don’t have to worry about top dressing for at least two years: the earth seedling is enriched with long-acting complexes. In addition, the soil and the plants themselves are completely free from pests and pathogens.

Shear in the spring, shortening by 2 - 4 knots, to strong buds. Pruning has a beneficial effect on the size and number of inflorescences. When there are enough shoots, they begin to thin out, leaving about a dozen of the strongest.

Looking for where to buy hydrangea seedlings Polar Beer? We have highly reliable planting material plus no trade markups. Own nursery in the Moscow region, fast delivery in the region. Lifetime guarantee.

My first order in Podvorye. Very good. Operatively. The packaging is beyond praise. Two roses Acropolis. Seedlings are strong, with barely swollen buds. I used the video on the site about saving sazhens ...

My first order in Podvorie. Very good. Operatively. The packaging is beyond praise. Two roses Acropolis. Seedlings are strong, with barely swollen buds. I used the video on the site about saving seedlings before planting and did everything according to the recommendation. Thank you! I am currently placing a new order.

I would like to purchase a paniculate hydrangea variety Vanille Fraise (Vanilla Fraise / Reni) for 830 rubles.

Good afternoon. I received the delivery seedlings in February (February 18), since my coltsfoot has already blossomed and the temperature at night is +2-+4, I planted them, having previously kept them in the fungicide for a day. I ordered Topalovich seedlings (not to be confused with the Topalovich Brothers) not happy, the root one is rather weak in my opinion. The packaging is excellent, the box is filled with styrofoam filler. Twice I received an SMS from the store, with the number of the departure and a notification of the receipt of the parcel at the post office. I recommend the store.

Order received, all good quality. Thank you!

Good afternoon A parcel came with gravel (a root in a bag of peat), but unfortunately one root rotted, there were two. What a pity

Thank you!

February 28, 2020 received the 1st order made by me in the Podvorye online store in the new season. Last year I also ordered plants, 90% of them were alive, except for the roots in the package "Echinacea purpurea Eccentric Yellow" at a price of 710 rubles, The package contained dry peat with dried roots. I did not write, although the price of echinacea was 12% of the cost of everything order. I want to say that the goods are packaged well, they reach the place of receipt 90% preserved. But this year I ordered roses from the Topalovich nursery with an open root system in a package, two of them have already arrived. In appearance, there were normal seedlings in the box, wrapped in a film, but when I unfolded, one of them (Floribunda rose Annie Duprey) turned out to be with very heavily chopped off roots (see photo), just empty peat imitating roots was rolled into plastic wrap. the roots occupied 1/4 of the package, the bark on the stem below the grafting site was already peeling off. It turns out from two plants one came guaranteed to be dead. I have ordered three more roses at a price of more than 1 thousand rubles each. Where is the guarantee that a dry stick in a bag will not come again? Roses should arrive in May, most likely I will write a refusal to order, it's already scary ...

Got another order, very happy with the plants! Everything is fresh and strong! Thank you!

Today I received the first parcel with roses from Topalovich. Well packaged as always. Roses are in good condition, there are small buds, but this is not critical. I sent them to “fill up” in the cellar (there are 0 ...

Hydrangea paniculata Polar Beer appeared in our gardens relatively recently, but due to its excellent frost-resistant properties, the plant quickly became popular among summer residents and experienced gardeners. Taking into account the fact that our winters do not cease to "please" with severe frosts every year, not all plants manage to survive the cold season. Even frosts of -40 ° C are nothing to this plant.

Let's figure out how Polar Beer differs from other hydrangea varieties, how to properly plant these plants and how to care for them throughout the year.

Show all

Features of the variety Polar Beer

Hydrangea is often used by gardeners in landscape design, because it is not only able to decorate any site, but also does not require painstaking care. This is especially true of paniculate hydrangea, because it is famous for its frost resistance. The ranks of varieties of this plant are constantly replenished. Not so long ago, a novelty appeared - Hydrangea Polar Bear, whose name in translation means "polar bear".

Breeders got this variety thanks to the two most common varieties of paniculate hydrangea: "Grandiflora" and "Limelight". The first has large flowers, but thin branches. Because of this, the plant must be constantly propped up, otherwise, under the weight of flowers, they may break. Especially often they break after rains.

The second variety has established itself as one of the most frost-resistant. Such plants do not have the largest flowers, but during the season they can change their color from pistachio to pink. Hydrangea variety Polar Bear combines the best qualities of parental varieties and at the same time gets rid of their shortcomings.

The inflorescences of Polar Bear can reach a size of about 40 cm, which makes this plant look very impressive among other flowers. They do not have a permanent color, during the flowering season the inflorescences can be pistachio, white, cream and slightly pinkish.

By the way, this variety of hydrangea is distinguished not only by the large size of the inflorescences, but also by the flowers themselves. As a rule, they exceed 3 cm in diameter. Due to the fact that the inflorescences are evenly distributed throughout the bush, the plant gives the impression of a large bouquet in a flower bed. An adult Polar Bear hydrangea bush can reach a height of 1.8 meters, and the diameter of the crown can be the same.

Hydrangea paniculata Polar bear loves sunny and semi-shady places. It begins to bloom in July, and its huge flowers will delight the eye until late autumn. This variety is not afraid of frost, so it is easy for it to endure temperatures even -40 ° C. Gardeners recommend planting Polar Bear hydrangea as a tapeworm or in tree and shrub compositions.

Where and on what soil to plant hydrangea?

Hydrangea Polar Bear does best in the south, but it must be ensured that a shadow falls on the landing site. It is extremely rare that hydrangea can bloom without problems in the sun, but only under the condition of enhanced watering. Young bushes are recommended to be protected from the afternoon sun and from strong winds. Since the hydrangea loves moisture, you should not plant this plant near trees that absorb water in large quantities.

Hydrangea Polar Bear is very demanding not only on soil moisture, but also on its richness. Gardeners recommend using humus, leafy soil, peat and sand for planting in a ratio of 2:2:1:1. This variety does not like lime, you need to consider this factor when choosing a place to plant. It is best that the soil is almost acidic, with a pH level of approximately 5.0.

In the northern regions, paniculata hydrangea is recommended to be planted in the spring, in the south this can be done in the fall. When planting Polar Bear, it is necessary to maintain a distance of 1 meter between plants. The root system of hydrangeas is shallow, but quite branched.

The size of the pits for young plants should be approximately 30 × 30 × 30 cm. In such holes, it is first necessary to pour 1/3 of a bucket of humus with peat. The root neck does not need to be deepened. When all the plants are planted, they need to be watered. It is advisable to use soft rain water rather than running water. After watering, the kidney must be loosened.

As for top dressing, it is carried out in 4 stages:

1 in the spring. Fertilizers are applied at the time of planting.
2 At the end of spring, when the buds appear. As fertilizers, you can use special mixtures with potassium, urea and superphosphate.
3 In the middle of summer. Complex fertilizers should be accompanied by abundant watering.
4 Late autumn. When the plants begin to prepare for winter, you need to use special fertilizers for hydrangeas.

Particular attention should be paid to top dressing in late May - early June. During this period, the flower buds of the next year are laid. You can enrich the soil with slurry mixed with mineral fertilizer. The solution should be prepared in a ratio of 1:10. For mineral fertilizer you can mix 20 g of superphosphate, 10 g of potassium nitrate and 10 g ammonium nitrate. Such doses are calculated for 10 liters of water. After the first top dressing in late spring, it is advisable to fertilize the soil again after 2 weeks. This will ensure the best flowering of hydrangeas in the current year.

Plant care rules

Since the Polar Bear hydrangea is very fond of moisture, about 15-20 liters of water should be poured under the bushes of this plant once a week. During the rainy season, you can limit yourself to one watering per month. To make plant shoots more durable, a weak solution of potassium permanganate can be used for irrigation.

Trunk circles must be mulched. To do this, you can use peat or humus. After digging, mulch is usually added. Hilling bushes must be done in the fall, hilling height should be approximately 20-30 cm.

Another hydrangea can be mulched with sawdust. In this case, the sawdust layer should be 6 cm. They should be left for the summer, raking a little from the hydrangea columns. Loosening should be carried out together with weeding, the loosening depth should not exceed 5-6 cm.

Hydrangea Polar Bear is especially spectacular when it blooms in large inflorescences. Naturally, it all depends on the type of plant, but an increase in buds can also be achieved with the help of proper pruning. In the spring, before the moment when the leaves begin to bloom, it is necessary to remove the weak branches of last year's growth. Those shoots that are well developed should be left and cut short. They should have 2-3 pairs of kidneys. When the budding period begins, it is recommended to cut off the weakest branches with inflorescences.

Polar Bear Hydrangea will not produce large flowers unless regularly watered. In hot and dry summers, without careful watering, this variety can produce small flowers.

Since this variety of hydrangea is highly frost-resistant, it is not necessary to cover the plant for the winter. Only in the first 2 years, the hydrangea needs to be mulched and hilled, then these processes are not so important.

Use in landscape design

Hydrangea Polar Bear can be propagated by green cuttings. This method is most often used by gardeners. To do this, cut the shoots of the current year.

Other hydrangea propagation methods:

winter cuttings;
division of the bush;
reproduction by layering;
seeds;
graft.

Due to its decorative effect, the Polar Bear hydrangea is used in landscape design in a variety of ways. It can be planted as a single plant, and in a mixboard, and as an uncut hedge.

Single plantings can be done against the backdrop of a lawn, but if the hydrangea is used in solitary groups, then it can frame tree plantations. In a mixboard, Polar Bear Hydrangea is best used in a mixed shrub composition. Herbaceous perennials will also be excellent neighbors. The only thing to consider when planting hydrangeas in a mixboard is enough space for full development. If the plants are crowded, then there will be no expected large flowers.

The Polar Bear hydrangea also looks impressive as an uncut hedge. As a rule, such a landing is used in the foreground of the site. If the hydrangea is planted in the garden, then its role is to separate the internal zones. The width of the flowering hedge can reach 1.5 meters.

Since the Polar Bear variety has appeared in gardens relatively recently, the positive and negative properties of this plant continue to manifest themselves in practice. Both amateur summer residents and experienced gardeners have already noted several features of this variety of hydrangeas that will help beginners grow spectacular flowers.

Hydrangea Polar Bear goes well with rhododendrons. These plants require the same soil, so it is best to plant them side by side.

Do not neglect pruning. If you do this annually, then the plant will be able to withstand even snowfalls, continuing to decorate the winter garden.

It is not necessary to loosen the soil for hydrangeas, since the root system is located close to the surface. Gardeners recommend replacing loosening with weeding and mulching.

Since Polar Bear hydrangea loves acidic soil, needles can be used to acidify.

If the hydrangea of this variety is frozen in winter, do not worry. She will fully recover in a season.

Enercom has been representing Polar Bear products in Russia since 2004. During its work, Enercom has earned the trust of customers with a deep understanding of needs and the ability to offer suitable solutions to the state and business. As a result, Polar Bear equipment has been supplied to many of the largest commercial and government facilities.

As part of the supply of Polar Bear equipment, Enercom offers:

1 year warranty on all supplied equipment
service and repair in the shortest possible time
minimum terms of delivery of equipment under the order
assistance in the selection and re-selection of equipment
maximum efficiency in the processing of applications
provision of necessary technical information and certificates
shipment of equipment by auto, railway transport according to a scheme convenient for you

Polar bear products

Company polar bear is one of the world leaders in the production of equipment for ventilation and air conditioning systems. Currently, Polar bear exports a record number of ventilation and refrigeration products worldwide every year. The products of the Polar Bear plant, due to their quality, have established themselves as perfect solution for organization modern systems ventilation both in small rooms (apartments, offices) and large facilities (concert and shopping halls, sports facilities, railway stations, airports, industrial premises etc.).

Company polar bear produces all the necessary equipment for the creation of ventilation and air conditioning systems of the high level. Polar Bear products are fully ISO 9001 certified.

Products supplied by Polar Bear:

polar bear

Company polar bear(Sweden) is currently one of the world's leading manufacturers of equipment for ventilation, heating and air conditioning systems. All Polar Bear equipment is easy to install and use. In a wide range of products you will find equipment for the automation of ventilation, air conditioning and heating systems (actuators, valves, controllers, temperature and pressure sensors, etc.), axial fans, air distribution devices, chillers and fan coil units, dehumidifiers and humidifiers. With a large number of products and rational management, Polar Bear maintains competitive prices. The main principle of work of the Polar Bear company is production of high-quality products. Polar bear pays great attention to environmental factor, in the production process it is allowed to use only the most modern and high-tech materials, with subsequent mandatory processing. Polar Bear's manufacturing processes minimize the impact on the environment.