How to connect laminate flooring between rooms with and without thresholds. How to lay laminate on linoleum - some of the nuances of this infrequent, but quite possible work Features of docking with tiles and laminate

During repair work a huge variety of materials are used in an apartment or a private house. They need not only to be used correctly and efficiently, but also to be able to combine with each other, creating a single composition. One of the very popular types floor covering is linoleum, but this does not mean that only it should be used for laying on the floor.

If you combine this material, for example, with floor tiles or laminate, you can create not only a functional, but also a beautifully decorated floor.

To make the transition between different floor coverings, and even individual parts of linoleum invisible, special thresholds for linoleum are used. Let's figure out what their functions are, what types and sizes they are, what materials they are made of and how to install them correctly so that this element lasts for a long time.

Functions

The main functions of the nut:

Protects joints from dirt - if you install this element on the floor, your floor covering will be protected from dust, dirt and moisture. Thanks to this docking, linoleum will be protected from delamination, and mold will not form under it.
Protects linoleum from tearing at joints and joins.
Eliminates differences - during the connection of two floor coverings that differ in height, such a docking bar will smooth out height differences as much as possible and will not allow the material to delaminate. Such a threshold can be used to connect, for example, linoleum and laminate.
Acts as decorative element- even if you try to join individual elements as much as possible, a seam or junction will remain visible, which do not look at all aesthetically pleasing. To avoid this situation, you need to use a threshold for linoleum.
Improves the perception of various kinds of coatings. Thanks to this, various floor coverings look like a single element, without contrasting with each other in color, texture and shade.
A similar threshold is also used as a connecting strip between rooms.

Thanks to the listed functions of such planks, you will be able to create the perfect designer coating without even resorting to the help of specialists.

Types and sizes

Depending on the functional features, there are several types of thresholds for linoleum:

Direct (another name is single-level) - used to join one or more options various materials. Such floor coverings are located at the same level or have a minimum difference of no more than 1 mm.
Difference (the second name is multi-level) - is used to connect materials that differ in height. Similar strips are used to dock linoleum with floor tiles, laminate or parquet. They are able to level even significant differences in the height of floor coverings, the size of such a difference can vary from 0.3 to 1.8 cm.

Finishing - they are laid in the place where the linoleum ended, and docking with another coating is not carried out. Most often, such sills are used in doorways.
Corner (it is also called stair) - this plinth has an angular shape and acts as a fastener to dock and secure materials on the stairs. Such elements are very flexible, as they are made of rubber.
The final one is used to decorate the approach to the threshold or podium, which is characterized by a large difference in height.

Please note that sills for linoleum must be selected, depending on the flooring used, existing differences in height, put forward requirements for the service life. The service life of this product will be affected not only by the correctly selected type of nut, but also by the material from which it is made, as well as how correctly it was installed.

The dimensions of the sills can be both wide and narrow. Most often, wide sills are used to hide the resulting large gap between different floor coverings. A narrow plinth is less noticeable against the general background and does not attract much attention to itself.

Manufacturing materials and design

Laminate pads are made from a variety of materials. The most common options are:

metal;
plastic;
rubber;
cork.

metal

One of the most popular skirting boards are metal models, as they are characterized by a long service life and a presentable appearance. Such products are made either from brass or aluminum. Aluminum thresholds are more common than brass counterparts, as they are cheaper.

The main advantages of aluminum sills include:

They are lightweight and durable, so they will last a very long time, retaining the original appearance.
Used in both residential and non-residential premises, because they perfectly tolerate temperature changes, stress and high humidity.
Available in various sizes, both narrow and wide. If the aluminum threshold fits into the doorway, which is characterized by non-standard dimensions, then such a product is very easy to shorten, it is enough to use a hacksaw or a grinder.
The smooth surface helps to make even a significant difference in height less noticeable.

The only downside to this plank is that you can easily slip on it. This feature should be taken into account especially for those families where there are small children or the elderly. In order to avoid an unforeseen traumatic situation, it is better to opt for an aluminum plinth, which has a corrugated strip in the middle. Such a product can be placed even in the bathroom, where the floor is very often slippery.

During the production of metal thresholds, they can be painted in a variety of colors that replicate bronze, silver or gold. The use of lamination technology helps to produce a plinth, the finish of which will resemble wood, stone or other material in texture.

Plastic

For the production of such strips, polyvinyl chloride is used. The main advantage of plastic sills is the extensive color palette, which is obtained due to the fact that the paint is added to the original composition.

Most often, such products are used to connect various kinds of floor coverings, for example, linoleum with carpet.

An important advantage of plastic skirting boards is also high flexibility, which helps to decorate curved joints in floor coverings. It is worth considering, when choosing such a product, that its service life is limited, as it is fragile and may lose its ideal appearance over time. After a certain time, it will have to be replaced, but since the cost of plastic sills is small, you can do this without compromising the family budget.

Rubber

Such thresholds for linoleum are made in two versions:

completely rubber;
with an aluminum base.

They are used in finishing in order to minimize the slip of the floor covering.

Rubber skirting boards also perfectly connect curved seams.

Cork

Such strips are used to fasten linoleum, as cork has excellent cushioning properties. Due to this feature, they are also called compensation rails. Cork sills can be made in a variety of shapes and sizes.

A wide choice of materials and a variety of colors allows you to finish the floor covering for any, even the most fastidious taste.

Installation and mounting methods

In order to hide the joints between the laminate and linoleum, it is necessary to correctly install the threshold. The most popular method of its installation is fastening on dowels. In this case, a decorative plinth with an aluminum strip is used. Such a fastening is called hidden, since the dowels are hidden under the lining and do not spoil the aesthetic appearance of the floor covering.

In order to fix the strips correctly, carry out the process in stages:

measure the seams;
cut the nut to fit the right dimensions;
clean the seams from dirt and dust;
lay the planks, moving from the center to the seam with the marked place for laying;
mark where the dowels should be;
using a drill, make holes into which fasteners will be inserted;
further, you should screw the screws and install a decorative strip on top of them.

There are also little tricks how to fix when laying linoleum, which is distinguished by curvilinear or arcuate joints. There are two ways to fix the strips at such joints:

Soft joint - in this case, a flexible plinth is used, which is attached to the floor, and a decorative strip is put on top. Such products are very easy to bend. They are able to hide the joints between the laminate and linoleum by 1 centimeter on each side.
The aluminum profile is able to hide small joints (a few millimeters on each side).

The process of fixing the bar is as follows:

Drill holes in the floor for dowels.
Measure the threshold of the appropriate length, insert the dowels into the holes.
To give the profile the desired shape, it must be lowered into water heated to 70 degrees and left there for 20 minutes. After this time, the nut will become very flexible and easy to bend.
Next, you need to screw the plinth onto the screws and insert the plug from above.

The threshold to the balcony is most often attached to the mounting foam:

It is necessary to clean the base under the threshold from contamination.
Measure the opening and cut the sill to the desired length.
Next, you should put an even layer of mounting foam.
Place a threshold on top and put a load that will hold the structure in the desired position.
After the foam dries, the gaps formed at the joints should be closed with silicone sealant.
The ends of the nut are closed with special plugs.

The most commonly used flooring materials are laminate and linoleum. They differ in excellent appearance, durability, resistance to many types of influences. In addition, the cost of such coatings is quite affordable for any budget. But they do not always cover the entire floor in an apartment or house with any one material. For example, linoleum is used for corridors or kitchens, and laminate is used for living rooms.

Transition between different types flooring can become not only a functional technique, but also a design highlight of the interior.

To make the coating attractive and seem uniform, it is necessary to properly process all the joints. There are several options for performing such work. You can use special docking strips or do without them. The choice of one or another option depends on the decorative requirements, the installation conditions of the coatings.

Single-level and multi-level joints

A one-level joint is the most attractive, the floor looks uniform, and the joint itself is not noticeable if you do not use slats for this. To perform this mounting option, it is necessary to level the floor specifically for these coatings, since the laminate usually has a higher surface than linoleum.

Joints can also be multi-level, when the coatings differ in height. But in this case, there is nothing complicated, you can use special sills that allow you to connect two floor coverings with a height difference of one and a half centimeters.

The planks completely cover the joint, the special design makes it almost invisible and very neat.

Planks and sills for joints between linoleum and laminate

The most common material for the production of connecting strips is aluminum. This option allows you to imitate the surface of the part in bronze, gold or wood, which greatly expands the possibilities of decorating the flooring. Most often on sale you can find 2 options:

In some cases, simpler plastic slats are used, which are much cheaper. Their surface is laminated, strength and resistance to stress are lower than those of aluminum. It is usually not recommended to join laminate and linoleum using such elements, especially in rooms where there are increased loads. But they are indispensable when it is required to perform curved joints, radius connection. Brass sills are considered the highest quality and durable among all, but their cost is higher. Brass is not processed, it retains its natural color, but fades over time. This problem is easily solved, the bar is simply rubbed with felt to restore shine and color.

Ways of fastening connecting strips

All strips that can be used to decorate joints differ in the method of fastening. You can choose any convenient option which is suitable for a particular situation. Upon delivery, manufacturers offer complete sets to make such attachments. For example, for through, special self-tapping screws come with the planks.

Today, the following types of fastening are applicable:

Laying without slats

The joints between linoleum and laminate can be designed without special strips. This option is more expensive due to the fact that there will be more waste during cutting. When laying the material, it is necessary to ensure that the direction of the pattern and the board coincide. In this case, the styling will turn out not only smooth, but also very attractive. It is necessary to think over the direction in advance. For example, when laying in corridors or halls, it is necessary to ensure that the laminate boards run along, not across.

Laminate without thresholds is easy to install, but linoleum is almost impossible, since it is necessary to ensure maximum fastening of the edges. For example, when docking near doorways, you will not only have to make a careful and very even cut, but also ensure fixation to the floor. Usually, silicone transparent glue is used for this. After the linoleum at the junction with the laminate is glued to the surface, it is necessary to additionally fill the gap between them with this adhesive composition, but make sure that it does not get on the outer parts. For this, masking tape is used, which is first glued to the joint area. After it is processed, the tape is cut along the joint with a knife. Care here does not hurt, the coating should not be damaged. The entire joint is filled with silicone glue, the tape is carefully removed.

There was an opinion that laying a laminate floor is quite simple. We will not dispute it, but in the process of work, depending on the specific circumstances, certain difficulties may arise. The most common problem arises when it is necessary to connect one coating to another. A similar situation occurs even when the entire apartment is covered with the same laminated material. You still have to face the question of how to join the laminate between rooms, use a threshold or do without it. Here everything depends not only on the design solution, but also on the technical preparedness and expertise of the laying specialist.

The joint between laminate and laminate is made under the following circumstances:

With the combination of laminate, you can perform all sorts of design solutions. For example, it is possible to visually increase the size of the room. To do this, docking of the same coating in the room is performed without setting thresholds.

By combining different materials it is possible to create unique interior. It is possible to join laminated panels of different shades or textures in the space of one room. The connection of the boards is done in accordance with the overall design.

Note: at present, the combination of two floor materials in the design of a room is becoming an increasingly used artistic technique, as a result of which the interior design of a room acquires a special charm and originality.

Preparation for bonding laminate flooring

Recall that for laying laminated panels, the base must be well prepared, leveled and cleaned of all contaminants. For joining two floor materials, this condition is also necessary.

To join a laminate with a laminate, it must be foreseen that the panels can have different thicknesses, it is 6 - 12 mm. The best way is to purchase laminated boards, underlays of the same thickness, in order to avoid the slightest difference in the height of the surfaces. It is very good if materials from the same manufacturer are to be joined, so that they have the same type of locking joints, the same strength class, and hence the service life.

How to join a laminate with a laminate, with or without a threshold, and which profile should be used for the laminate joint?

There are several options for joining laminate to laminate. Consider the most common and less complex.

Most often, the connection of laminated surfaces occurs when moving from one room to another, i.e. in doorway. Here it is necessary to leave a technological gap. In its absence, the formation of deformation, swelling of the floor surface is likely. The gap left must be filled in some way. How to close the joints of the laminate?

Laminate joint in a doorway

To our joy, all these questions have been thought out for a long time, the answers to them have long existed, our task is to take turnkey solutions and apply them correctly. Coating manufacturers also produce a variety of components. These include: substrates, skirting boards, connecting strips for laminate. Planks for connection are also called threshold, molding, profile for connection. They vary in shape and are made from various materials.

Profile form

According to the forms, the docking strips for the laminate can be divided in this way:

The considered products carry a decorative load, but not only. When installing a laminated floor, a technological gap is required, which the connecting profiles make hidden, protect against damage and at the same time allow them to have an aesthetic appearance.

Threshold materials

Connecting profiles are made from various materials.

Laminated - made from compressed wood fibers, a laminated film with decoration is applied on top. A wide variety of colors and textures, so it is easy to match the decor of the joined laminate. The connection looks aesthetically pleasing and, with the right selection, is almost imperceptible. Often installed at the junction of a doorway.
Metal - aluminum, brass, steel; the top is covered with a decorative film. It is characterized by high strength, due to which it is installed in places with high traffic, for example: doorways.
PVC profile is a flexible joint profile for laminate, excellent for making wave-like joints. Available in a wide variety colors, i.e. well matched to the color of the joined surface. Relatively inexpensive.
Rubber - more often an angular profile for decorating stairs. They are anti-slip, increase the safety of walking on stairs.

There are several ways to design a seam line:

using thresholds, profiles;
use of a cork compensator;
use of building sealants.

With all its advantages:

ease of installation;
beautiful view of the joint;
no threshold - not used very often.

The point is their serious shortcomings:

after their application, it is impossible to dismantle the panels in contact with the connecting compound without damage;
when filling the joint with sealant or foam, the laminate loses its ability to expand, this can lead to damage to the coating.

Installation of connecting profiles

Aluminum moldings can be mounted in an open-mounted manner using dowels and self-tapping screws. On the aluminum bar there are already ready-made holes for self-tapping screws, accessories are sold together with a metal threshold.

Aluminum threshold, open fitting

Decorative fastening method - looks more attractive, fastening is not visible, it is hidden under a decorative nozzle.

The mounting profile is connected to the base with self-tapping screws. A decorative nozzle is laid on top, pressed until it clicks. It covers the traces of fastening, and the joint looks pretty.

How to attach a universal profile:

Docking laminate and linoleum

This combination of materials is quite common. Both coatings have high quality, but it is necessary to correctly and aesthetically arrange their joint. The strength of the floor covering and the interior of the room depend on this.

Consider the connection case: the thickness of the linoleum is much less than the thickness of the laminated panels with the substrate. There are two ways to connect in this case:

joint in one level;
joint at different levels of surfaces.

CONCLUSION

Now you know how to connect laminate with linoleum at the junction, how to connect laminate joints with laminate between rooms, it remains to translate all this into reality. Big problems when docking coatings will not arise if everything is done according to the instructions. If the connection line is complex or too long, it is better to entrust the connection of surfaces to specialists.

From such small but important points, as the design of the joints of the coatings, the level of repair and the general interior of the renovated premises largely depend.

The most popular floor coverings of the last decade have become laminate and linoleum. Owners furnish residential or commercial premises, fully trusting the reviews of these products. And rightly so, because they are beautiful, practical and durable. So why not use them when decorating an apartment or office. But which material should be preferred if they are both so good?

Experienced designers will immediately answer that it is convenient to use both materials at the same time. This will solve your problem but create a new one. How to perform correct docking laminate with linoleum, if you decide to delimit the room into zones in this way? It is worth considering that the junction of two materials on the floor is made in different ways, the choice is up to you.

Joining two materials

What is the difficulty of joining?

As mentioned above, the most popular floor coverings are linoleum and laminate. And if you decide to use them together, then you will have to study some of the nuances of docking.

The complexity of this event lies in the fact that the thickness of these two materials is different. Linoleum is thinner than laminate. Therefore, the main task is to make their joint as invisible as possible on the floor.

Scheme of laying laminate

This is easy to do if you know how to solve the problem.

Docking methods:

Aligning the height of the linoleum so that its surface is flush with the laminate.
Sealing the joint while maintaining the differential and using additional elements – aluminum profiles or thresholds.

In each case, it is worth approaching the solution of the issue from a practical point of view. After all, the aesthetic appearance of your premises depends on the correct connection of linoleum and laminate.

Single level joints

From the point of view of practicality, single-level joints of laminate with linoleum are the most profitable. The work uses overlays and moldings that make the joint on the floor between the two materials smooth and invisible. But it is recommended to take their choice responsibly, and check how they meet the requirements listed below.

Overlay requirements:

Waterproof, only in this case they will qualitatively connect two joints different material. Otherwise, if moisture enters the linoleum or laminate, it will deform, which will lead to damage to the floor.
UV resistant. The joints of linoleum or laminate are not always protected from this influence, therefore, when hit sun rays the overlay should not fade or deform so that the junction does not deteriorate.
Ease of installation, otherwise you run the risk of messing around with this event for a long time, pretty spoiling your mood.
Durability and wear resistance. These qualities will help to use pads to connect the joints of linoleum and laminate for many years.

Docking laminate and linoleum at the same level occurs as follows:

another dense material is laid under the linoleum to raise it to the same level as the laminate. Usually this material is multilayer plywood;
with the help of a special lining, two materials are joined.

Multi-level joints of laminate with linoleum are suitable if you want to level the floor from two levels. For these purposes, sills of various heights are produced.

Product types:

straight sills for joints of single-level floors;
transitional - to connect two levels of the floor;
final - to decorate the edges of linoleum or laminate;
corner or stair - to connect linoleum with stairs.

In a hardware store, you can easily find products for joining coatings. The only thing you have to decide is the material of manufacture. The most popular sills:

metal;
plastic;
cork;
rubber;
wooden;
laminated.

products are selected according to their external design. The width and color of such devices can also be any, so you have the opportunity to choose the product to your taste.

Advice! To make a multi-level floor joint aesthetic, it is recommended to use joint profiles or thresholds. They will protect the joints from moisture, and the floor will become even and neat.

Ways of fastening the thresholds

The joints are connected using special strips and sills, which are fixed in several ways:

Through connection. In this case, the connecting strip is superimposed on top of two materials - linoleum and laminate - and screwed to the floor with self-tapping screws.
Concealed connection with fixing strips. The back side of such a bar has special grooves. The front part is flat, which allows you to connect two materials without visible fasteners. Due to this, linoleum and laminate are on the same level.
Instead of connecting - gluing the coating to the floor. This method is less practical, but still it is sometimes used. For use liquid nails or transparent adhesives based on silicone. Such a connection is suitable for places with low traffic, otherwise the joints will be damaged sooner or later.

Planks and sills for joints

To connect the joints of the laminate and linoleum on the floor, sills or aluminum strips are often used. This is due to the fact that aluminum is a practical material that allows you to decorate the flooring depending on the color. Such planks are painted in bronze or gold, so the possibilities of design fantasies are unlimited.

The following types of slats are intended for connecting two materials:

Anodized, which are recommended for use in places with high traffic. Their coating is very resistant to abrasion, so the bronze-colored plank will please the eyes of the owners of the house for a long time.
Laminated, which are advised to be installed in rooms with low traffic. They are less resistant to stress, but do not lose their relevance.
Plastic. The cost of this material attracts many consumers, but you need to be careful with them. They cannot be used in places with high traffic, and they are not recommended to join the laminate with linoleum. But in the absence of financial resources, this option can also be considered.

It is important! Although plastic strips have several drawbacks, you can’t do without them when decorating curved joints of linoleum with laminate. Even a radius connection is within their power.

There are also brass sills, which are of high quality and durability. Accordingly, the cost of this pleasure is high, but if the price is not an obstacle, then it is impossible to think of another option. The only drawback of this material is darkening over time. This is because the brass used for these slats is not processed, so it darkens. But to solve this problem is simple - just rub the bar with felt, and it will play brighter than before.

Docking without straps

If you decide to connect linoleum with laminate without additional planks, you will have to be prepared for the fact that the costs of such work will be significant. To do this, you need to choose materials so that they completely coincide with each other. This applies to the directions of the laminate planks and the pattern on the linoleum.

It is important! With the right choice of material, your floors will always be smooth and beautiful.

But if you can do without thresholds when laying a laminate on the floor, then in the case of the second material you will have to try to provide good fastening edges so they don't curl. This is especially true in places where there is a large passage of people.

To ensure reliable fixation of linoleum to the floor, transparent silicone glue is used. The material is cut as accurately as possible so that the junction is barely noticeable. After connecting the two materials, the gap between them is filled with the same glue.

Advice! To prevent glue from getting on the front surfaces when joining the two materials, use molar tape.