Repair and service of gbo. Repair of gas equipment - what can go wrong? Gas stove repair service address

Recently, due to cost-effective conditions, the installation has gained great popularity. gas equipment on the car. LPG equipment (LPG) is a special device that allows you to store and supply gaseous fuel to the engine, due to which the car moves.

Brief description of gas equipment

The gaseous fuel for gas-balloon equipment is methane and propane-butane mixture. Depending on what fuel is selected, as well as what type of engine is installed, LPG equipment is divided into single-fuel, gas-diesel and dual-fuel with independent supply of only one type of fuel to the engine. Each of these fuel systems has its own specific features, but with all this, it also has common features. In the classification of gas-cylinder equipment systems, the term "generation" is used. To date, as such, there is no official international classification regarding gas-balloon equipment of cars. We will consider the principle of operation of one of the latest systems - the fourth generation of gas equipment.

In this case, the gas is injected either in parallel or sequentially, and this is ensured by electromagnetic injectors. Their work is regulated by a special gas control unit, which reads the signals that go to the petrol injectors. And, guided by them, it makes a calculation, and then sends the appropriate signals to the gas nozzles. The gas that flows from the reducer to the injectors is injected into the intake valves of the engine.

Disadvantages of LPG equipment:

- too expensive equipment;

Manufacturer's warranty expires upon installation;

The safety of operation is enclosed in a rigid framework;

Difficulty in finding gas stations;

Luggage space is sacrificed.

Advantages of gas-cylinder equipment:

- fuel economy;

The engine is operated in a softer mode;

Environmental friendliness.

Frequent malfunctions of gas equipment

In the first and second generations of gas-balloon equipment, the lack of supply gas mixture into the power plant is a consequence of the failure of the solenoid gas valve installed on. The high-speed valve sticks in the closed position. Pipeline clogged. The filter elements are clogged. The speed valve does not work. The flow valve does not open fully. The power plant of the car is muffled, gas continues to flow into the system for the reason that the switch is faulty, the gearbox is out of order, the gas solenoid valve of the carburetor is depressurized.

These difficulties associated with starting the power unit of the car arise as a result of a gearbox malfunction. The gearbox is incorrectly adjusted. The fuel mixture of gas and gasoline is simultaneously supplied. The increased consumption of the gas mixture during freezing of the reducer occurs due to depressurization of the reducer diaphragm. The cooling system is overflowing air mass. The coolant level is too low.

The presence of a gas smell occurs due to the fact that the exhaust gases in the exhaust system are in a leaky state. The solenoid valve of the carburetor is depressurized. There is a gas leak from the gearbox housing and other connections of the gas line. During the operation of the power unit in idle mode, the engine speed may stop developing due to a malfunction of the gearbox itself, the ignition system, or the fact that the air filter is clogged.

Also, the fuel consumption of the gas mixture may increase due to poor heating by the gearbox cooling liquid. Faulty gearbox. Reduced compression level on the engine cylinders. Reducer adjustment. Malfunctions in the ignition system. The air filter is clogged. Let's look at the typical causes of malfunctions that relate to the third generation of gas equipment. The car engine does not gain full power due to malfunctions in the regulation software. Lambda probe, stepper gas supply regulator, gearbox are faulty. Clogged gas lines and gas filter. The open throttle led to a failure due to the fact that the mixer was not selected correctly. The regulation of the entire system is broken. The sensor that detects the position of the throttle is faulty.

The engine, upon reaching the recommended temperature regime, does not switch to work with a gas mixture due to the fact that there are no indications of the tachometer operation at the speed of the power unit. Reducer temperature sensor is out of order. Pops appeared on the intake manifold, at the time of opening the throttle. This is due to a violation of the adjustments of the thermal valve clearances of the gas distribution mechanism. The timing and ignition system are faulty. The intake tract is depressurized, as a result of which air is sucked in. Gas is supplied incorrectly by the stepper regulator or an incorrectly adjusted system leans the fuel mixture.

The consumption of gas fuel increases due to disturbed adjustments of the control lambda system. In this case, the problem is a malfunction of the lambda probe and the stepper regulator that supplies the gas mixture. The compression level in the cylinders of the power plant decreases. There is a violation of the adjustments of the gearbox and the ignition system. And also due to the clogging of the air filter.

In the fourth generation of gas-cylinder equipment, the following malfunctions are typical. At idle, the power unit ceases to work stably. The reason for this is the disturbed adjustment of thermal gaps on the valves of the gas distribution mechanism. The gas distribution mechanism has some kind of malfunction. Reduced engine compression. The lambda probe is defective. The gas injection system is incorrectly adjusted. Malfunctions in the ignition system. Gas nozzles are not provided with normal operating conditions. The engine is not able to develop full power due to a clogged fine filter, gas filter and line. Malfunctions in the lambda probe and gas injectors. The gas injection system is adjusted incorrectly. Lowered level gas pressure reducer.

Upon reaching the required temperature regime the power unit does not switch to gas mixture supply. A discharged battery has a charge level of less than nine volts. The gearbox is not warm enough. The causes of this malfunction are the gas pressure sensor, reducer temperature and gas. There is no signal indicating the number of revolutions of the internal combustion engine.

The reason for the increased gas fuel consumption is incorrectly selected injector and calibration fittings. Reducer pressure level increased. Gas regulation broken. The probe lambda, gas nozzles, gearboxes and ignition systems are faulty. Lack of heating by the coolant of the gearbox. Low compression level in the cylinders of the power unit. Gearbox not adjusted correctly. The air filter is clogged.

With a sharp opening of the throttle valve, a failure occurs due to disturbed adjustments of thermal gaps on the valves of the gas distribution mechanism. Malfunctions of the gas distribution mechanism of the power unit of the car were found. Low engine compression. Faults in the ignition system and gas injectors were detected. Clogged fine gas filter, gas lines and gas filter. The pressure in the gas reducer is too low. Calibration fittings and injectors are incorrectly selected.

Gas injection spontaneously returned to the supply of gasoline fuel mixture. This is due to the fact that the temperature of the gas mixture is at a low level, which is manifested due to the fact that the gearbox does not have sufficient power. The battery is discharged, and the charge level indicator has dropped to less than nine volts. This happens due to a faulty gas pressure sensor, reducer and temperature. The signaling of the number of engine revolutions has been stopped.

Independent repair of gas equipment

If you decide to carry out the repair of gas-balloon equipment yourself, then you will have to follow the basic rules initially. The reasons why your equipment of any of the generations could fail were listed above. Therefore, let's look at the methods that solve them.

1) If the power unit does not want to start, or it turns off right while driving, then the problem is that the gas pumping to the mixer is suspended. The main reasons for this refusal are as follows:

- Frost forms on the evaporation basis and to solve this problem, it is necessary to start the engine on gasoline if the temperature outside is not lower than 5 degrees Celsius. And only at the moment of its warming up, at least up to 40 degrees, switch to gas fuel;

Air is trapped in the transmission of the heating system and evaporates due to the fact that the liquid level decreases. Here it is necessary to adjust the liquid level to the required amount.

2) If at the time of using gas fuel its consumption began to increase during engine operation, then the mixer should be replaced.

3) If the engine runs on gas, and gasoline is also consumed, then the problems are in the broken gasoline solenoid valve. The solution to this problem is to replace the valve.

4) When the engine has crossed the threshold of 45 thousand kilometers, the cause may be the wear of rubber gaskets. Locate and replace any defective rubber gaskets.

5) Engine power has decreased, along with it, the maximum speed of the car has decreased. The reason for this may be due to the following factors:

- malfunctions in the filter of the electromagnetic gas valve. To eliminate this error, it is necessary to close the valve cylinder. After unscrewing the nut from the gas valve nozzle, remove its cover. Be careful not to damage the seal while doing this. Dismantle the filter itself, disassemble it, and then wash it in a solvent. If it is very dirty, then replace it.

Turn off the valve of the second valve of the reducer-evaporator quite a bit. You need to slightly increase the gas supply by turning the regulator clockwise.

If the gas dispenser works unbalanced, then turn the reducer screw half a turn.

During the 16 years of existence of GARANT-GAZ, specialists have studied many designs of gas-balloon equipment from various manufacturers in the industry. Every day, gas equipment repairmen carry out up to 10 inspections of vehicles equipped with LPG. Today we are pleased to present you a range of professional services, including:

• installation of HBO on a car;
• diagnostics and maintenance;
• HBO adjustment;
• full repair of HBO;
• dismantling of equipment.

Even in the most technically difficult cases, the installation of LPG takes no more than 8-10 hours. Having visited our service center in the morning, in the evening you will be able to pick up your car with a fully assembled and tested gas system. The GARANT-GAZ company has the necessary devices and tools for diagnosing HBO on a car. After identifying defects and malfunctions in the system, full-time specialists will offer you inexpensive maintenance and adjustment of HBO.

Dismantling of gas equipment

Sometimes repairing old gas equipment is unprofitable from an economic point of view. Therefore, instead of servicing an HBO that has already served its time, it is more efficient to replace all components with new ones. Uninstallation of LPG systems is as fast as their installation upon purchase.

Repair of gas equipment on a car is an operational and quality process, which guarantees an increase in efficiency and the elimination of malfunctions that bothered you. Contact GARANT-GAZ to calculate the exact cost of diagnostics and repair of HBO on your vehicle!

Gas-powered vehicles are not uncommon today. This is an environmentally friendly and economical transport, which has already been appreciated by many drivers. But, like any equipment, HBO requires regular Maintenance and repair. Specialists of the Avtogaz salon are always ready to help customers in solving these problems. Their qualifications allow for quick and accurate diagnostics, the selection of optimal maintenance methods and prompt repairs.

Diagnostics of gas automotive equipment

Installing HBO has many advantages, but with wrong settings system, the exhaust valves may quickly burn out and require further repair or replacement of parts. Incorrect adjustment leads to rapid damage to the exhaust system and the exhaust group of an automobile engine. To eliminate such a problem, it is important to diagnose gas equipment in a timely manner.

An unscheduled inspection may be required in the following cases:

• Unstable and difficult engine start.
• Deterioration of vehicle dynamics.
• The appearance in the car of the smell of gas.
• Too fast catalytic converter wear.
• Reduced mileage with increased gas consumption.
• Overheating of the motor and the appearance of failures in its operation.
• Burnout of the exhaust valve seats and the valves themselves.

The diagnostics of gas equipment includes computer testing using specialized stands. During work, specialists check all HBO units. If deviations from standard parameters or malfunctions are detected, the system is sent for adjustment or repair.

Adjustment and repair of HBO

Gas-balloon equipment of cars needs constant care and control. Most often, the gearbox wears out in the systems, which is responsible for the injection of gas into the vapor phase, corresponding to the load of the car engine. The service life of the system and the smooth operation of the motor depend on its serviceability. In the gearbox, the diaphragm, which is responsible for the quality of the entire engine, is subject to damage. This element requires special attention from specialists and the owner of the vehicle.

HBO adjustment is necessary during the scheduled replacement of filters, during the installation or repair of the system. When it is carried out, several conditions must be taken into account. For example, temperature control. During the repair, specialists will replace the failed elements of gas equipment and return the entire system to full working capacity.

Diagnostics, maintenance and repair of gas automotive equipment in Avtogaz

Our specialists are highly qualified, allowing them to quickly carry out necessary work and identify problems if they exist. Many customers trust us to service their cars, knowing what we will offer them. best options in Moscow at competitive prices.

"A‑Iceberg" - 25 years with you. 5 million repairs completed.

Repair gas stoves at home on the same day! The master will arrive today and fix the breakdown of any complexity on the spot. We work daily.

Warranties for all types of work and spare parts

The best, certified masters

Original spare parts from the manufacturer

Qualified engineers of the A‑Iceberg Service Center will arrive at the request of the client in any area of ​​the city and repair gas stoves of various brands and models. We will fix the malfunctions associated with the complete inoperability of the equipment and fix minor flaws. In their work, our specialists use modern equipment and high-quality spare parts, which guarantees the correct functioning of the gas stove after the repair is completed for a long time. Departure on the day of treatment and the affordable cost of services are also considered our advantages.

Typical malfunctions of gas stoves

Repair of gas stoves is a complex technical process that requires significant skills and experience. Specialists of the A-Iceberg Service Center are able to quickly and efficiently eliminate any malfunction. Successful execution repair work possible with a thorough knowledge of the design features of equipment models. The traditional gas stove consists of the following modules:

• The number of burners depends on the brand and model of equipment, and the design of each element includes a divider and a reflector installed on the base
• The electric ignition function is present on almost all modern gas stoves, and the design may differ slightly
• The gas leakage control device is responsible for stopping the fuel supply when the flame is extinguished and ensures the safety of the use of equipment
• The oven is included with most appliances and can be either gas or electric, depending on the model.

Any of these elements of the gas stove can fail due to various factors. The main reasons may be improper operation of the equipment, non-compliance with the manufacturer's requirements. Intensive use entails the wear of the main elements of the system and the failure of equipment. It is also impossible to exclude a factory defect that manifests itself after the end of the warranty period.

The main breakdowns of household gas equipment, with which customers apply to the A-Iceberg Service Center, are:

In addition to these defects, gas stoves can break down and lose their characteristics in case of other malfunctions. Common damages include broken hoses, failure of fuses and incandescent rods, deformation of the seal on the oven door. Any damage is diagnosed by our masters at the first visit and immediately eliminated.

Served brands

Repair of gas stoves at home is a priority activity of the A‑Iceberg Service Center. In order to ensure minimal equipment downtime, our engineers eliminate almost any breakdown during a visit to the client. We work with equipment of various brands and models, effectively repairing the most complex breakdowns.

In the apartments you can find a large number of options for a variety of equipment, produced by world brands and unknown to a wide range of companies. We fix requests due to breakdowns of such popular brands as AEG, Ariston, Bosch and Ardo. The A-Iceberg Service Center is also called by the owners of the popular Korean technology Samsung and LG.

Troubleshooting requests are common. domestic models gas stoves, as well as equipment manufactured by neighboring countries. For each request, we work in individually performing repair and restoration work as quickly and efficiently as possible.

Repair cost

We use high-quality spare parts supplied directly from the manufacturer, and do not use the services of intermediaries. As a result, the price of repairs, even the most complex ones, is affordable for customers who contact us. At the same time, our masters guarantee the impeccable quality of work.

original spare parts

In order for the gas stove to serve as long as possible after repair, we install only original spare parts. This approach guarantees high level repair and long service life of equipment. Most of the required components and assemblies are constantly in stock, and in case of absence, we will quickly bring the necessary module and perform repairs. Affordable price of original spare parts and their constant availability are our competitive advantages.

Warranty period up to 2 years!

We carry out every repair with the highest quality and conscientiousness. Our task is to arrive at the appointed time and fix the problem on the spot. At the same time, each client seeks to avoid further problems with the equipment. Our experts carry out high-quality repairs and provide a guarantee for up to 24 months. The obligation applies to both work and replacement parts.

We employ only professionals

Each master is a professional in this field. Extensive experience, high qualifications and regular training in specialized centers allow engineers to carry out repairs of any level of complexity. Our experts are able to repair the gas stove of both well-known brands and models rarely found on the market. The quality of the work performed is beyond reproach.

Call a gas stove repairman

In order to quickly and efficiently restore the efficiency of the gas stove, each client just needs to call us or leave an electronic application on the website. Our masters will try to determine according to the client's data possible reasons faults and go for repairs with the necessary stock of spare parts.

We will arrive in any area of ​​the city at exactly the set time and repair the gas stove using original spare parts. A‑Iceberg Service Center is always high quality works, affordable prices and prompt response to any request. If the gas stove is out of order or its performance has become worse than the original, the help of our engineers will become great solution Problems.

gas stove idle a product that is in everyday use among the inhabitants of Russia. With the right use, imported and Russian gas stoves serve 10-15 years non-stop. Being prefabricated products with a low degree of rigidity, gas stoves are in dire need of technical examinations.Inspection and prevention plays a significant role in reliableand safe operation of the hob. This service does not attract enough attention of the owner and after a while the gas stoves break down, gradually stop working and completely fail.

The practice of daily inspections and repairs of plates shows the wear of the blocking device (gas control). Unskilled intervention in the automation of the oven disrupts the operation of the thermostat. The physical and mechanical properties of rotary mechanisms age and wear out. The buttons under the burner turn-on knob are oxidized, forcing the electric ignition to work constantly.

Breakdowns and malfunctions are divided into two types:

1. Mechanical wear of swivel joints and protective devices:
2. Penetration of grease and water into the hole of the nozzle and the electric ignition button.

Typical malfunctions of gas stoves

The execution by the locksmith of a complex for the prevention and repair of a gas stove depends on the level of knowledge and experience that helps to quickly determine the cause of the breakdown according to the client.

1. The burner switches off spontaneously - checking the functions of the burner. If the burner of the stove, including the oven, did not go into automatic mode after ignition, i.e., they go out after releasing the EMK button handle, it is necessary to check the thermocouple contacts of the burner that could not be ignited.

2. Electric ignition constantly clicks. Reason: closed block of electrical impulses; water spilled during washing; grease sticking to the power buttons. In any case, do not delay with a non-working stove. The right decision there will be an application to call an employee.

The list of malfunctions in the operation of old gas stoves refers mainly to defects detected during operation and eliminated during unscheduled repairs. The number of such repairs is large: the number of emergency calls exceeds 60% of the total number of applications to the service, viz.

• Replacing the thermostat - if the temperature in the oven has dropped;
• Replacing the heating element - if, when turned on, it knocks out the RCD;
• Replacing the spark plug - if the burner does not ignite;

All the breakdowns listed above, adjustment work and repair of the gas stove as a whole must be carried out by a specialist of the territorial gas economy during the installation of the stove and during operation at the request of subscribers. For this purpose, the company "GazService" was created, for the period of the post-warranty period of the plate, it provides the customer with spare parts and qualified assistance from the master.

Repair of gas stoves at home is possible until the end of this day!

The most acceptable form of service provision is on-site repair of gas stoves on orders, with the determination of the scope of work for the initial inspection. Performing restoration actions in relation to the breakdown of built-in gas stoves related to the adjustment of individual controls, replacement of faulty rotating assemblies and damaged parts, elimination of gas leaks.

How to repair the stove on the day of the call

Accepting applications for call a gas stove repairmancarried out by phone. At night, you can send a message to voice mail or use feedback form. When applying for gas stove repair indicate nature of the defect and product data: gas stove model; factory number; year of manufacture etc. . The order is transferred to the slab master, who, depending on the expected breakdown, will receive the necessary parts from the warehouse.

Note! Repair of gas stoves is a responsible business, therefore regular monitoring and maintenance of gas equipment should be carried out by an authorized specialist of the gas service or an employee of MOSGAZ. Unprofessional intervention by a private master from the Avito website can lead to serious danger and harm to health. When working with hazardous equipment, the main thing is to observe safety precautions and turn off the supply lines: electricity and gas. More in the section: