Submersible drainage pump caliber NPTs 750 5n. Loan from Tinkoff Bank

A mud pump with a float in a plastic case is used for pumping contaminated water from basements, wells, wells, ditches, etc. It can also be used for pumping water from tanks, pools, for irrigation and individual water supply. The float switch automatically turns off the pump if the water level falls below a predetermined level and turns it on when water enters, which protects the pump from overheating and combustion, prolonging the service life.

Characteristics

• Instrument Type Submersible Sewage Pump
• Power Consumption 750 W
• Mains connection 220 V ~ 50 Hz
• Maximum lifting height 9 m
• Maximum Suction Particle Size 5mm
• Maximum Capacity 210 l/min (12.6 m3/h)
• Float Switch +
• Cutting Mechanism -
• Fitting diameter 25/32 mm
• Supply Current AC
• EU plug
• Weight (Net) 5.6
• Weight (Gross) 5.62
• Packed Dimensions (LxWxH) 220x210x360

Characteristics

0 reviews for Caliber NPC-750/5N Centrifugal submersible pump

Delivery

Express delivery.

Moscow(within the Moscow Ring Road) when ordering before 15-00 on the next day*, later - on the following days. When ordering on Fri after 15-00 delivery on Tue.

Mon - Fri from 10 am to 6 pm - any 3-hour interval and from 6 pm to 11 pm. Sat from 10 am to 4 pm and from 3 pm to 6 pm.

• up to 3 kg - 250₽
• from 3 to 5 kg - 270₽
• from 5 to 10 kg - 320₽
• from 10 to 15 kg - 415₽
• from 15 to 20 kg - 475₽
• from 20 to 25 kg - 565₽
• from 25 kg - from 600₽

Moscow region up to 50 km: when ordering before 15-00 on the next day from 11:00 a.m. to 6:00 p.m. days. When ordering on Fri after 15-00 delivery on Tue.

• in addition to the tariffs in Moscow: 55₽ / 5 km.

Saint Petersburg(within the Ring Road) when ordering before 15, delivery is every other day *, after 15 - on the following days. When ordering on Fri after 15, delivery on Wed.
On weekdays from 10 to 21 - min. time interval 3 hours (from 18 to 21 with double tariff). On Sat from 10 to 18 - two intervals: before 14 and after.

• up to 3 kg - 250₽
• from 3 to 5 kg - 300₽
• from 5 to 10 kg - 380₽
• from 10 to 15 kg - 485₽
• from 15 to 20 kg - 600₽
• from 20 to 25 kg - 750₽
• departure outside the ring road up to 50 km: Mon - Fri from 10-00 to 18-00 - additionally 55₽ / 5 km.

! * subject to availability in stock. Some products are delivered on order from 2 to 7 days. Terms are specified when placing an order.

• orders weighing up to 15 kg are delivered to the door
• orders weighing over 15 kg are delivered to the entrance
• maximum courier waiting time - 15 minutes
• delivery to shopping centers is carried out to the main entrance

Before delivery, an SMS is sent to the client with the courier's phone number and order number; for convenience, the client can contact the courier on his own. The next day, 30-60 minutes before delivery, the courier calls the recipient and finally agrees on the delivery time. If the buyer cannot be reached during the day, the order is transferred to the next day. Upon receipt of the order, the buyer checks the completeness and integrity of the goods and pays the courier. The courier does not check the operation of the goods, and also does not provide consulting services.

Upon receipt of the order, the buyer must check it for damage, completeness and performance (except for gas tools). In accordance with Art. 459 part 1 of the Civil Code of the Russian Federation (also Article 211 of the Civil Code of the Russian Federation), claims for the quality of the goods delivered to the buyer can be presented only until the moment the goods are transferred to him by the seller (forwarder).

The procedure for the transfer of goods does not provide for its testing and waiting for the results by the courier. The courier most often is not a specialist in the equipment purchased in our store and the result obtained during testing cannot be qualified. Most technically complex products require you to read the instruction manual before using them. IN winter time year, the transfer of goods is associated with a sharp change temperature regime, therefore, the immediate inclusion of electronic equipment is a violation of the operating conditions.

Post office.

• You can calculate the cost of postal services using the Russian Post calculator.
• The order is sent only after full payment, we do not send cash on delivery!
• Standard postal items are accepted weighing up to 10 kg, no larger than 425*265*380 mm.
• The agency fee for a non-standard shipment is increased by a factor of 1.5 (if the sum of three dimensions of the shipment does not exceed 250 centimeters, and the maximum side length does not exceed 160 centimeters).
• The agency fee for a heavy shipment is increased by a factor of 1.5 (for a shipment weighing from 10 to 20 kg inclusive in a standard package with a maximum size of 425*265*380 mm).
• The agency fee for a non-standard (oversized) item is increased by a factor of 2.5 (with a item weighing from 10 to 20 kg, and the sum of three dimensions of the item does not exceed 250 centimeters, and the maximum side length is not more than 160 centimeters).
• The maximum possible weight of the item is 20 kg, and the sum of the three dimensions of the item does not exceed 250 centimeters, and the maximum side length is not more than 160 centimeters.

After receipt of payment to the account, the order is sent on the same day or the next (payment after 15-00), if the goods are under the order, the terms increase, in this case. negotiated separately. After sending, the tracking is sent the next day in the morning on weekdays. For example: on Mon. sent on Wednesday morning - tracking, on Thu. sent on mon. - tracking.

Transport companies.

The order is sent after full payment for the goods and delivery to the TC terminal in Moscow (according to delivery rates in Moscow), within 1~2 working days. Delivery to Shopping mall Business lines free of charge. The services of the transport company are paid by the buyer upon receipt of the order.
We send sl. transport companies:

• TC Business Lines (free of charge to the terminal)
• O-courier
• TC Veteran-Transit
• TK OOO Group ST
• Energy

Belarus and Kazakhstan.

In Belarus and Kazakhstan there are representative offices of transport companies PEK and Business lines or others from the above, it is possible to send through them.

EMS Russian Post. You will be able to place an order and we will deliver it by EMS Russian Post, after prepayment of the order. The shipping cost is calculated automatically during the ordering process and specified by the manager.

! Important. Upon receipt of the order, the buyer must check it for damage, completeness and performance (except for gas tools). In accordance with Art. 459 part 1 of the Civil Code of the Russian Federation (also Article 211 of the Civil Code of the Russian Federation), claims for the quality of the goods delivered to the buyer can be presented only until the moment the goods are transferred to him by the seller (forwarder). After receiving the order, claims for external defects of the goods, their quantity, completeness and presentation are not accepted.

Payment

Cash

You can pay for the order in cash directly to the courier when he delivers the order, or at the pickup point Grastin and Grastin partners in Moscow and the region, St. Petersburg and the region, Nizhny Novgorod, Belgorod, Krasnodar, Bryansk and Orel.

We ship to other regions after payment or cash on delivery (10% prepayment, 4% commission). When placing an order, you must specify an e-mail. After payment is received on the account, the order is transferred to the delivery service on the same or next day. day except holidays.

Bank card

upon receipt of the order.

All couriers accept credit cards. Payment by card is possible at almost all pickup points.

Visa, MasterCard, etc. are accepted. Payment by card upon receipt is negotiated in advance when placing an order. Some goods worth more than 10,000 rubles are paid with a minimum commission of 2.5%.

Online on site.

The buyer can pay for his order by card online. To do this, you need to make a purchase through the basket and specify PayKeeper when choosing a payment method. After checking the availability and delivery cost, the order will be transferred to the status "Confirmed" (all status changes will be notified by e-mail), after which the buyer will have access to the bank's page for payment plastic card.

Yandex money

An order in an online store can be paid in the Yandex.Checkout payment system - these are instant and secure payments. Min. order 1300 rub.

Payment methods:

• Payment from a Yandex.Money account 
• Payment from bank card 
• Payment by code through the terminal 
• Payment from account mobile phone 
• Payment from WebMoney account 
• Payment via Sberbank Online 
• Payment in Alfa-Click 
• Payment via mobile terminal (mPOS) 
• Payment via MasterPass 
• Payment through the Internet bank of Promsvyazbank 
• Payment via QIWI Wallet

Payment by receipt

Payment by receipt - for individuals- after placing an order and confirmation by a store employee, the buyer gets the opportunity to view and print an automatically generated payment receipt in his personal account or receive it by e-mail or fax. Validity of the receipt - 3 working days.

Cashless payments

We work according to a simplified taxation system, i.е. We do not allocate VAT.

After placing an order and checking it, an invoice will be sent to the specified e-mail. It is possible to independently print an automatically generated invoice in your personal account. Payment must then be made within 3 business days. If the order is placed after 18.30, it will be processed the next day.

Valid for all types of delivery. Order amount from 5000 rubles.

C.O.D

Only upon delivery by Boxsberry and Hermes transport companies, prepayment of 10% of the order value, cash on delivery surcharge of 4%.

Cash on delivery has a limit on settlements and amount. Min. order 3000 rub.

Loan from Tinkoff Bank

• Delivery in Moscow and region. when ordering before 15:00 on the next day, later - on the following days. When ordering on Fri after 15:00 delivery on Tue. In other cities, the interval increases by 1-2 days.
• Receipt of the order is possible from 13:00 the next day, after the transfer of the goods.
• Delivery of orders is made from 11:00 to 20:30 hours daily.
• Employees of the pickup point check the completeness of the order and issue it to the buyer, consultations on the goods are not made.
• Storage of goods is carried out within 7 calendar days.
• Maximum dimensions of one place: length up to 190 cm, width up to 50 cm, depth up to 70 cm, weight up to 25 kg.
• Bulky orders: maximum total order quantity up to 1 m³, maximum total weight of one order up to 60 kg.
• The buyer takes out the order from the premises of the point of issue independently.

Maximum length the sides of the package are 120 cm, the sum of the length of the width and the height is up to 250 cm. The maximum weight of the parcel is 15 kg.

The maximum length of a package side is 120 cm, the sum of the length of the width and height is up to 200 cm. The maximum weight of the parcel is 29 kg.

Submersible drainage pump Caliber NPTs-750/5N is a pump from the drainage systems, which is used for pumping lightly polluted water. Such pumps are most often used for pumping flooded rooms and niches. In addition, such a system can be used to water the garden or lawn on suburban area or in a country house.

Features of the drainage pump

The basis of Caliber NPTs-750/5N is a steel case. Stainless steel provides excellent protection internal system pump. Thus, the drain pump is protected from corrosion and external damage. The service life of this mechanism is significantly increased due to the integrity of all its components.

Advantages

• Work in automatic mode. This mode is available in the pump due to the float switching system.
• Strength and durability. Thanks to stainless steel, the pump retains its performance and flawless appearance longer.
• Ease and convenience. The mechanism is so simple and convenient to learn and operate that even a schoolboy can handle it.

Submersible drainage pump Caliber NPTs-750/5N is the maximum convenience with minimal time and effort. The cost of the pump is within the reach of the aisles, which means that everyone can purchase it. You can lower the device to a depth of 8 meters, and its maximum pressure is 10 meters. Such a system is installed directly on the bottom of a reservoir, well or other place where pumping of water is necessary. When buying a Caliber NPTs-750/5N, it is covered by a 12-month warranty. The pump is powered by electricity, so it must be grounded.

Palisad for easy work and pleasure

ADA measuring technology - synonymous with "extra precision"

"Red" Makita - budget tool of excellent quality

Spring has come into its legal rights, which means that very soon happy owners land "hundredths" will need tools, fixtures and materials to restore order in the areas, to horticultural work and for recreation fresh air after righteous labors and not only. All this can be selected here and now "with a few touches". presented in our hypermarket with tools for gardening, irrigation systems, greenhouses and greenhouses, garden decor, barbecues and barbecues, furniture and utensils for a picnic, etc.

We offer fast and convenient shopping, and Palisad- high-quality goods for easy work and pleasant rest.

The trademark ADA Instruments has been known in the market of measuring equipment since 2008. Under this brand there are measuring, diagnostic and other tools and equipment for construction and geodesy, non-destructive testing devices, contact and non-contact measurements, etc.

ADA is a guarantee of accuracy in the most difficult measurements, it is durability and reliability. Already today you can familiarize yourself with the PDF catalog of ADA products in the corresponding section of our hypermarket and place an order. More detailed information on each ADA commodity item will be posted a little later.

Follow our publications.

The blue Makita is most familiar to the domestic consumer, although on the Internet, on foreign sites, you can find Makita in various colors. Until recently, in Russia it was possible to meet a red instrument under the Maktec by Makita brand - in principle, the same Makita, only designed for the domestic consumer. But in February 2018, it was officially announced that sales of this brand's instruments in Russia would cease. Maktec tools still on sale - stock clearance.
The new "red" Makita is the MT Series tool, based on the Maktec brand and designed for DIYers. His distinguishing feature- budget simplicity with the same high quality Makita. The series is represented by mains and battery hand power tools for various purposes - drills, rotary hammers, planers, jigsaws, etc.

Due to its small size and weight, the manufacturer positions the router as an edge cutter, but in fact it is a universal tool for a wide range of jobs.

The model is made in a compact case and is equipped with a sufficiently powerful electric motor that allows milling to a depth of up to 35 mm. The versatility of the model is provided by a set of component bases. One base is intended for the actual processing of edges. The second provides a groove under certain angle. The third turns a compact tool into a full-fledged plunge router low power. The milling cutter is convenient both for processing edges and for grooving, for example, for cutting recesses and holes for hinges and locks when installing doors.

Two dust extraction accessories are used to ensure the cleanliness of the workflow when performing various tasks. For large volumes of work, you can use an industrial vacuum cleaner. The long network cable does not restrict the user's movement.

For accurate and high-quality work on materials of different densities, the Makita RT0700CX2 router has a smooth adjustment of the speed with a special adjusting disk. Setting the milling depth adjustment is simple and highly accurate. Thanks to the provided constant electronics, the revolutions under load remain unchanged, and the soft start system eliminates the jerk of the tool at the beginning of work and prevents shock loads on the mechanism and voltage fluctuations in the network.

Frazier Makita RP 2300FC equipped with a powerful and reliable electric motor and designed for efficient and high-quality work on the most different materials It's just a matter of equipment. The soft start system eliminates network overload at the moment the tool is turned on and protects the mechanism from shock loads, and during operation, the number of revolutions remains unchanged thanks to the provided constant electronics. Constant speed control contributes to high quality processing.

The motor of the router is protected against overload. This is expressed in the fact that when the permissible load is exceeded, its power is automatically reduced, thereby preventing overheating.

For high-quality work on materials of different densities and for different kind work, you can pre-set the optimal speed. The number of revolutions is regulated in six steps by a special adjusting disk located in the upper part of the body.

The presence of the letter "F" in the model name indicates the presence of a built-in backlight. LED lamp turns on simultaneously with the engine start and continues to shine for another 10-15 seconds. after it stopped. The router is characterized by a simple and precise adjustment of the working depth. The turret allows you to set three different milling depths without changing the position of the stop pin. To ensure the cleanliness of the process, an external dust extractor can be involved in the work: a special anti-dust nozzle is designed for this (not included in the delivery set).

The planing machine (thickness gauge) is designed for high-quality planing of narrow wooden blanks - boards or beams. The tool guarantees uniform chip removal along the entire length of the workpiece, which is not limited by anything. The maximum width of the processed board - 304 mm. The wider the board, the thinner the chips can be removed in one pass. The workpiece is pulled under sharp knives by white polyurethane rollers that do not leave dirty marks as a result of possible skidding of the feed bar. The feeding of the cutting block is characterized by high smoothness and is carried out by a comfortable handle. The handle is foldable for storage and/or transportation. Folding tables are stamped, made of thick metal and plated with nickel.

The thickness gauge has a self-supporting design: unlike other models, the side covers do not carry any functional load and can be easily removed, providing optimal access for servicing mechanisms. The carbon brushes are located behind removable covers: the degree of brush wear can be easily monitored and it is easy to replace them if necessary. As a cutting tool in this model, a pair of narrow disposable double-sided knives is used.

In general, the Makita 2012NB thickness gauge is simple and reliable in operation and can become a worthy "decoration" for a carpentry workshop of any size.

Logistics data

Weight, kg: 5,50