1 linear. How to convert square meters to running meters and just to meters? Measuring for kitchen areas

The correct answer is No, because a square meter and a running meter are units of measurement of different categories. Square meters measure the surface area, and running meters measure only the length of the product.

Below we will analyze the concepts of square and linear meter

Square meter (sq.m; m2) V international system units (SI) is the area of ​​a square whose side is 1 meter. In square meters, the surface area of ​​​​walls, floors, real estate objects is measured, where the area, for example, an office or apartment, is equal to the floor area. Or if you need to calculate the amount of ceramic tiles per wall or linoleum per floor, you need to multiply the length by the height and get the surface area in square meters. Although linoleum itself is sold in running meters, more on that below.

Designations in square meters (m2) are used in…

• Measurement of buildings, houses, apartments, premises;
• Measurement of facing and flooring materials;
• Measurement of floor surfaces of roofs, floors;
• Measurement of the area occupied by equipment, furniture

The concept of a running meter

Converting square meters to linear meters and just to meters is IMPOSSIBLE!

Linear meter (roll material, product, fence, furniture) is the length independent of the width. Since the price of the material is included in the cost of 1 running meter of carpet, linoleum or lining. A linear meter of linoleum with a width of 3 meters will naturally be more expensive than linoleum with a width of 2.5 meters.

Sometimes, in the manufacture of kitchen furniture, linear meters are also used for ease of calculation. For example, the manufacturer calculated that a kitchen cabinet 3 meters long and 60 centimeters wide with the required number of shelves, drawers, and doors would cost $1,200 at the rate of the National Bank. And as you know, the kitchens in our apartments are different, mostly small, so the manufacturer sets the price for 1 linear meter at $400. The customer only fits 2.5 meters. The standard equipment is discussed, the placement of shelves, boxes, and the price of $ 1,000 is displayed.

400$ x 2.5m = 1000$

Designations in running meters are used to measure:

• Flooring roll materials (roll of fabric, carpets, linoleum…);
• Boards, lining, block house, plinths, sometimes pipes, fittings;
• Cost price of furniture (kitchen) with standard equipment and accessories.

How to calculate linear meters to square meters and vice versa

Example 1

To translate square meters in linear it is necessary to know the length and width of the product (material) that is sold in linear meters.

We need to lay 12 m2 of linoleum in the kitchen, and in the store they are sold by linear meters, but with a width of 2.5 m, 3 m or 4 m. It would be better to buy 4 linear meters of linoleum 3 meters wide or 3 linear meters 4 meters wide:

4m (length) x 3m (roll width) = 12 square meters
3m (length) x 4m (roll width) = 12 square meters

In this particular case, 12 square meters is equal to 3 or 4 linear meters, but this cannot be considered, because the width must always be taken into account.

Example 2

Let's take the same example with kitchen furniture 2.5 running meters. We need to find out the floor area covered by our furniture in the kitchen. To do this, we multiply the length of 2.5 m by the width of the kitchen wall 0.6 meters, and we get 1.5 square meters - this is the area occupied by our furniture in the kitchen.

Example 3

To finish the bath, we need to buy 65 m2 of lining. It is sold in 3 meters long at a price per linear meter. It is necessary to calculate how many running meters you need for 65 m2.
Our board (lining) has dimensions of 300 x 10 x 0.5 cm or 3m x 0.1m x 0.005m. We multiply the length by the width in meters and get the area of ​​\u200b\u200bone board (0.3 m2):
3m x 0.1m = 0.3 m2
Now we will find out how many boards are needed for 65 m2. To do this, we divide 65 m2 by the area of ​​​​1 board:
65: 0.3 \u003d 216.67 or 217 boards (linings)
We have a 3-meter lining (board), which means we need to buy 651 running meters.
217 x 3 = 651 m/p

The weight of the reinforcement is a very important parameter both for the construction and for the construction of various buildings (for example -). The mass of metal elements must be taken into account when planning the construction of the building itself. It determines the rods in free and stressed zones, the distance between the bars, etc.

In addition, the cost of construction will depend on the weight of a running meter of metal stubble. It is cheaper to purchase metal rods at wholesale depots, where the price is indicated per ton. The calculation in construction is made in running meters. Therefore, it is important to be able to calculate how many meters of rod are in one ton.

1 Correspondence table for reinforcement weights for different diameters

The standard mass of reinforcement of one or another diameter is regulated by GOST 5781-82 standards. The standard calculation table looks like this:

This table is absolutely easy to use. In the first column we select the diameter of the rod in mm, which will be used, in the second column we immediately see the weight of one linear meter of a rod of this type.

Third column shows us the number of linear meters of reinforcement in one ton.

1.1 Calculation of reinforcement weight

The first and easiest way to find out how much a meter of reinforcement weighs is to use an electronic calculator for similar calculations.

To work with it, you only need to know the diameter of the rod with which we will work. All other calculation parameters are already included in the program.

Two other ways to find out how heavy is the rebar meter, is somewhat more complicated. Let's look at them in order of increasing complexity.

Since reinforcement with a diameter of 12 mm and 14 mm is most often used in private construction, we will take just such rods as the basis for calculations.

1.2 An example of calculating the weight of reinforcement (video)

2 Calculation by standard weight

Calculate the amount of reinforcement, necessary for construction (provided that we have the table at hand).

1. Draw up a building construction plan, taking into account the creation.
2. Decide on the diameter of the rods.
3. Calculate the amount of reinforcement used in meters.
4. Multiply the mass of one meter of reinforcement of the desired diameter by the number of rods used.

Example: 2322 meters of reinforcing bars with a diameter of 14 mm will be used for construction. The weight of a running meter of such rods is 1.21 kg. We multiply 2322 * 1.21, we get 2809 kilograms 62 grams (grams can be neglected). For construction, we need 2 tons 809 kilograms of metal rods.

2.1 Calculation by specific gravity

This method of calculation requires certain knowledge, skills and labor. It is based on a formula for calculating mass, which uses quantities such as the volume of a figure and its specific gravity. To resort to this method of calculating the running meter of reinforcement it is worth it only if there is neither an electronic calculator nor a table with GOST standards at hand.

Everything is measurable. It is a fact. But the values ​​used are different. Most of the products that are rolled up, which relate to fittings and kitchen products, are today measured in running meters. To be more precise, a running meter is how many meters in length. The width is not taken into account.

In one store, these stripes are in this form. But in the other there is just one wide strip of 3 meters long 10 meters. In essence, this is what we need. Since the cost is indicated in linear meters, in the first store we will pay three times more than in the second. The savings are huge!

Remember, 1 linear meter is 1 meter of the product in length. And then it doesn't matter what the width is. The price will not change.

Carefully!

Very often, only the number of linear meters and the price are indicated in the product information card. This means that we do not know anything about the width of the product. If you buy everything in a store or market, you can bring your own tape measure.

On the Internet, such data is often hidden. You can not order a product without making sure of its parameters. It is worth calling the store and find out its width.

When you find two identical items with different prices, do not rush to order the cheapest one. It is possible that the width of that product will not suit you.

Marking the fabric is a matter, although not simple, but accurate. With kitchens, which are also measured in linear meters, everything is much more complicated. Usually, we take into account 1 meter of standard headset. That is, simple cabinets and tables are always used for miscalculations. All additional elements decorations are negotiated separately.

If you buy a ready-made kitchen, then information about running meters is not particularly important. You already see the finished price tag and decide whether the price is right or not. But with individual orders, you need to carefully consider everything.

It is important to emphasize that one can never know in advance the exact amount. We can only judge the minimum cost of 1 linear meter of your future kitchen.

There are two popular situations in which the answers are completely different:

1. Accurate calculation. You order an ordinary kitchen, where all drawers, cabinets and tables have standard sizes. You don't change anything. The final price may differ slightly from the planned one.

2. Completely inaccurate calculation. The kitchen is completely original. All cabinets and drawers are designed for your convenience and size of dishes and furniture. The headset fits exactly into the design of the room. The final price may be several times higher.

Why is the total going up?

It is difficult to translate linear meters. And for the sake of a new idea, you have to put up with the pricing policy. To cut costs, it is worth connecting different components. That is, it is necessary to use as many standard elements as possible, diluting them with custom ones. So you get a kitchen that fits well into the interior, and save your budget.

Don't forget that different materials and designer features add value. One linear meter of a locker can become more expensive if you decide to install not 4, but 5 drawers in it. Each detail requires additional expenses. Carving or decorative stickers are far from cheap.

Alternative to running meter

Many shops calculate the price based on ready-made kitchens. You choose the model you like, see its price, and then change it a little, if necessary. In such cases, it is easier to evaluate a future purchase.

As a result, we see that a linear meter is a value by which many goods are measured, from fabric to kitchen. It defines the length without specifying the width. In order not to make a mistake in the purchase, you need to clarify all the points. If the Internet refuses to tell you the width, then it's not worth the risk. After all, you can just lose your money.

The square meter (sqm) is a unit of area in the International System of Units (SI). It is equal to the area of ​​a square with a meter side. The area of ​​a rectangular () room is calculated as the length multiplied by the width (height).

Square meters are widely used in practice. For example, when it comes to selling an apartment of 46 sq.m, it means its floor area. When it is necessary to calculate the required amount of ceramic tiles for laying on the wall, it is necessary to find out the laying area, namely the length of the wall multiplied by the height of the room.

The concept and distinctive features of a running meter

The running meter is completely different from the square meter. It measures length, and a square meter measures area. These two units are not interconnected and it is impossible to convert meters into square meters without knowing the width of the product. For example, a piece of fabric with a length of 2 linear meters and a width of 3 meters will have an area of ​​2 * 3 = 6 square meters.

Many people are wondering how many centimeters are in linear. The answer is quite simple - a running meter is no different from a regular meter in length, i.e. it is 100 cm. But it is a kind of length without width. To determine linear meters, it is necessary to have information only about the length.

Linear meters measure the length of the product in the case when its width (or height,) does not matter, for example, a roll of fabric, carpet or baseboard. In other cases, square meters are used, for example, when measuring the amount of ceramic tiles, laminate, etc.

Linear meters often measure rolled Construction Materials. For example, in relation to linoleum, the price is often set in linear meters. This means that regardless of its width (it can be 3 m, 4 m), the buyer will pay only for the length he needs. The fact is that the width of the product is already initially included in the cost. But it happens that the cost of linoleum is indicated in square meters. Then it turns out that in order to buy 10 linear meters of linoleum 4 m wide, you need to pay for 40 sq.m.

For ease of calculation, the cost of furniture, such as a kitchen, is indicated in running meters. It means that regardless of the number of shelves and doors, the buyer will pay only for the length. In this case, we are talking about the standard version and standard fittings.

Often, linear meters are also used by builders when determining the cost of work. For example, for laying tiles on steps, installing skirting boards or grouting joints in ceramic tiles the price of services depends only on the length, and not on the area of ​​​​work. But most construction works calculated on the basis of the area of ​​​​the room (square meters).

Almost every person must have heard the expression "linear meter". For many, this definition remains quite complicated, since it is not at all clear what is the difference between sq. m. from the usual. What is the conversation about?

One linear meter equals the usual length of one meter. It is used to measure goods that have a certain width, for example, linoleum. It is much easier to calculate the cost of goods, taking running meters as a basis, than to calculate the cost of a square one.

For example, you need to buy carpet in the store, 2.5 wide and a certain length. Make a calculation of 1 m2, such a segment is not very convenient. To do this, you need to determine the area of ​​\u200b\u200bthe product. Then divide it into squares. In other words, it is necessary to perform complex mathematical calculations.

It's much easier to do calculations on a per-square basis. To determine the cost of the goods, you will need to multiply the length of the segment of the carpet by the number of meters.

There is enough big list goods in which the calculation of the cost is based on the number of running meters. These include.

• Fabrics.
• Linoleum.
• Carpet.
• Finishing film.
• Roll polyethylene.
• Electric wires.
• All kinds of pipes.
• Various fences.
• Fences.

Furniture calculation

A lot of consumers believe that the calculation by running meters applies only to roll materials. However, this opinion is not entirely correct. When buying a product, we often come across a certain roll width. Linear very often determine the cost of furniture.

To make it clear, let's look at the following example.

The furniture manufacturer made an approximate calculation. To completely fill the three-meter kitchen, taking into account all the details of the furniture, he will need 30,000 rubles. Therefore, the cost of 1 m of furniture will be 10,000 rubles. In other words, such a cost will correspond to the price of one running meter. Based on such fairly simple mathematical calculations, the furniture manufacturer can tell the customer what the cost of a set of furniture of the corresponding sample will be.

However, it is necessary to take into account one important nuance. When calculating the price m, only the cost of the cheapest fittings and material was taken into account. Sometimes the cost of fittings is not included in the calculation at all.

Therefore, if you are made a very tempting offer, you must definitely find out what material the product is made of, what accessories are installed on it. In this way, quite often attract new customers.

How many mm in a linear meter

As already mentioned, one linear meter is equal to one standard meter. This means that at 1 running meter 1000 mm.

cheat sheet

So, to make it easier to deal with units of measurement, they can be summarized in one table, in which their ratio will be visible, and it will be quite easy to convert one unit to another.

What does the term "square meter" mean?

This unit is designed to calculate the area of ​​a square, in which each of the sides will be 1 meter. To determine the size of the area, you need to multiply the height and length of the product. For designation, the short form is used - sq. m.

Today, this unit is found in our lives almost everywhere. by the most good example you can name the dimensions of the living space. In other words, if we are talking about an apartment of 16 m2, then the floor area is equal to this value.

The square meter is most commonly found in the construction industry. To determine the area of ​​a wall that is 6 meters long and 4 meters high, simply multiply six by four. It turns out that the area of ​​\u200b\u200bthe wall is 24 m2.