How many square meters in a running meter. Running meter - how much? Consider in detail This unit measures
The correct answer is No, because a square meter and a running meter are units of measurement of different categories. Square meters measure the surface area, and running meters measure only the length of the product.
Below we will analyze the concepts of square and linear meter
Square meter (sq.m; m2) V international system units (SI) is the area of a square whose side is 1 meter. In square meters, the surface area of walls, floors, real estate objects is measured, where the area, for example, an office or apartment, is equal to the floor area. Or if you need to calculate the amount ceramic tiles on the wall or linoleum on the floor, you need to multiply the length by the height and get the surface area in square meters. Although linoleum itself is sold in running meters, more on that below.
Designations in square meters (m2) are used in…
- Measurement of buildings, houses, apartments, premises;
- Measurement of facing and flooring materials;
- Measurement of floor surfaces of roofs, floors;
- Measurement of the area occupied by equipment, furniture
The concept of a linear meter
Converting square meters to linear meters and just to meters is IMPOSSIBLE!
Linear meter(roll material, product, fence, furniture) is the length independent of the width. Since the price of the material is included in the cost of 1 running meter of carpet, linoleum or lining. A linear meter of linoleum with a width of 3 meters will naturally be more expensive than linoleum with a width of 2.5 meters.
Sometimes, in the manufacture of kitchen furniture, linear meters are also used for ease of calculation. For example, the manufacturer calculated that a kitchen cabinet 3 meters long and 60 centimeters wide with the required number of shelves, drawers, and doors would cost $1,200 at the rate of the National Bank. And as you know, the kitchens in our apartments are different, mostly small, so the manufacturer sets the price for 1 linear meter at $400. The customer only fits 2.5 meters. The standard equipment is discussed, the placement of shelves, boxes, and the price of $ 1,000 is displayed.
400$ x 2.5m = 1000$
Designations in linear meters are used to measure:
- Flooring roll materials (roll of fabric, carpets, linoleum…);
- Boards, lining, block house, plinths, sometimes pipes, fittings;
- Cost price of furniture (kitchen) with standard equipment and accessories.
How to calculate linear meters to square meters and vice versa
Example 1
To convert square meters to running meters, you need to know the length and width of the product (material) that is sold in running meters.
We need to lay 12 m2 of linoleum in the kitchen, and in the store they are sold by linear meters, but with a width of 2.5 m, 3 m or 4 m. It would be better to buy 4 linear meters of linoleum 3 meters wide or 3 linear meters 4 meters wide:
4m (length) x 3m (roll width) = 12 square meters
3m (length) x 4m (roll width) = 12 square meters
In this particular case 12 square meters is equal to 3 or 4 linear meters, but it is impossible to count this way, because the width must always be taken into account.
Example 2
Let's take the same example with kitchen furniture of 2.5 linear meters. We need to find out the floor area covered by our furniture in the kitchen. To do this, we multiply the length of 2.5 m by the width of the kitchen wall 0.6 meters, and we get 1.5 square meters - this is the area occupied by our furniture in the kitchen.
Example 3
To finish the bath, we need to buy 65 m2 of lining. It is sold in 3 meters long at a price per linear meter. It is necessary to calculate how many running meters you need for 65 m2. 
Our board (lining) has dimensions of 300 x 10 x 0.5 cm or 3m x 0.1m x 0.005m. We multiply the length by the width in meters and get the area of \u200b\u200bone board (0.3 m2):
3m x 0.1m = 0.3 m2
Now we will find out how many boards are needed for 65 m2. To do this, we divide 65 m2 by the area of 1 board:
65: 0.3 \u003d 216.67 or 217 boards (linings)
We have a 3-meter lining (board), which means we need to buy 651 running meters.
217 x 3 = 651 m/p
The concept of "linear meter" often confuses people. Although there is nothing mysterious, and even more terrible, in this phrase. Consider several options where this concept can be applied, and learn how to calculate the required number of running meters.
A running meter is the usual length in meters, but taking into account the width of any finishing or household material (carpet, linoleum, plastic or vinyl film). Let's say you have a room 4.5 meters wide and 6.0 meters long, and you are going to lay new linoleum in this room. In the store, you need to choose a material that is suitable in quality and pattern and be sure to pay attention to the width of the rolls. Linoleum width can be 1.5 meters, 2.0 meters or 2.5 meters. Since the width of the room is 4.5 meters, in order to cover it with linoleum, you will need to put a few pieces. It can be three pieces of 1.5 each (1.5m * 3 = 4.5m) or two - one with a width of 2.0 and the second - 2.5 (2.0m + 2.5m = 4.5m).At least three pieces of a smaller width, at least two of a larger one, should correspond in length to the length of the room (6 meters). This means that in order to cover a room with linoleum 1.5 meters wide, you need to buy 18 linear meters (6 * 3 = 18). If you decide to lay linoleum with a width of 2.0 and 2.5 meters, then you only need to buy 12 linear meters - 6 meters with a width of 2.0 and 6 meters with a width of 2.5 (6 + 6 = 12).
Any other rolled floor coverings are also sold in running meters. But to cover the floor with carpet, it is enough to buy as many linear meters as the length of the room. Carpet is usually not joined, as is done with linoleum flooring, so you need to choose the width that completely covers the floor.
By linear meters you can buy both a film for finishing greenhouses and a film for pasting any surfaces. You can calculate how much material is needed for pasting, for example, a door, in the same way as for laying linoleum. But in order to buy polyethylene for a greenhouse, you first need to draw on paper all its parts separately on a scale. Next, calculate the lengths and widths of all individual parts, and then calculate the running meters.
If you are going to buy ready-made kitchen furniture - it is also sold in running meters. You will only need to add up the lengths of all the walls along which the kitchen will be installed, and then only choose the appropriate furniture option. In the case of kitchen furniture, in addition to the standard width, the cost per linear meter will include kitchen facades, internal shelves and drawers, as well as fittings. Please note that the cost per linear meter does not include the cost of the hob, oven and dishwasher.
Running meters are considered to be a variety of cornices and pipes - all those materials that require docking with each other. And in running meters, any fences, for example, metal fences, are considered.
In order not to make a mistake with the calculation of linear meters, it is better to come to the store with a drawn room plan. It should indicate the length and width of the room, and if it is a kitchen, then the height and location of windows and doors. Good luck with the calculation and repair!
Running meter - how much? This is an analogue of the usual meter. The linear meter is used when measuring length in situations where the indication of width or height can be neglected for one reason or another.
In construction, there is such a thing as a "linear meter". For many, this measure of length remains a mystery for a long time. We hasten to reassure you, there is nothing terrible here, except for the expression itself.
Let's try to understand this concept and learn how to correctly calculate the required number of linear meters.
Running meter. How much is this?
This measure of length measures what is twisted into a roll: linoleum, corrugated board, fabric, carpet. This concept is also used to measure the amount of material needed in construction or it means the amount of work to be done. For example, a running meter of a kitchen, a pipe, a plinth, a fence, a tile, a foundation, and so on.
FAQ
How many mm in a linear meter?
As already mentioned in our article, to calculate a linear meter, the length of the material is required, since the width is already fixed and can be different. That is, in 1 meter 1000mm of the length of the product.
How many linear meters per ton of rebar?
Calculating the amount of reinforcement for the foundation in running meters. The measure of the amount of reinforcement is a ton. Therefore, you need to convert a linear meter into tons and even then look at the price. But how many meters of reinforcement are contained in a ton depends on its diameter: the thinner the reinforcement, the more meters in a ton.
Let's say you need lumber. In one square meter there can be a different number of linear meters for different materials (edge board, floor board, lining). This is because the number of square meters also depends on the width of the material.
For example:
The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. You need to calculate as follows:
Divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of linear meters.
1 sq.m. / 0.120 m = 8.33 l.m.
How much does a running meter of paint cost?
Most often, painters consider the volume of their work in square meters. That is, the length multiplied by the width of the surface.
One "linear meter" is equal to one meter?
Example - Structural Measurement
The second option for measuring the structure along the contour (outlining line) is chosen to calculate the cost of the work.
The length of the structure is measured with a tape measure.
What calculations are made in linear meters,
which ones are square?
If the amount of laminate, parquet or ceramic tiles required for flooring is calculated in square meters x, then the amount of linoleum or carpet is calculated in p / m.
The consumption of plaster, putty, primer, paint is calculated in kilograms per square meter. The consumption of wallpaper or drywall is calculated in p / m. To calculate the cost of work, calculate the cost of work per square meter.
The calculation of wallpaper for wall covering is similar to the calculation of linoleum.
On the calculator below, you can calculate the dimensions of window slopes, which are taken into account when calculating the cost of repairs and purchasing consumables.
We are all accustomed to consider the unit of measurement of distance or length - a meter. Then what is a running meter? How is it different from the usual? Yes, basically nothing. In running meters, it is customary to measure the length of any material. At the same time, its width or height is not taken into account. They are either standard, or, when measured, they do not have a significant value.
What is measured in linear meters
In running meters, you usually measure the fabric in the store. With a width of 1.5 m, a running meter will be considered a piece of fabric 1 m by 1.5 m. If you buy pipes, then, regardless of their thickness, the length of the pipe will be measured in running meters. So is the electrical cable. It doesn’t matter at all what its cross section is, whether it is thick or thin, the price for it is indicated per linear meter. The same situation is with skirting boards, linoleum, various heaters and seals, etc. And when the cost of a kitchen is calculated in running meters, what do you mean?
What is a running meter of a kitchen
In this context, the linear meter is used, rather, as a conditional value. For the convenience of calculations, it is considered that a linear meter of a kitchen is the furniture that is installed along a wall 1 m long from floor to ceiling, according to the design project. It can be tables, shelves, cabinets and other modules. Usually, the cost of the kitchen is indicated as such - per linear meter. It is so convenient to immediately calculate its approximate price by multiplying the length of the wall along which it will be located by the cost of one linear meter of the kitchen.
Each of us at least once in our lives had a chance to make repairs or purchase new furniture. And quite often, when buying certain building materials, we heard about such a unit of measurement as a running meter. Such a concept confuses almost everyone, and it is rather difficult to immediately determine how this value differs from a square meter. You cannot find out what a running meter is from a dictionary, because this concept was invented by manufacturers of goods. But in this material we will understand what this unit of measurement is.
This parameter represents the usual length of one meter for products with a certain width, such as fabric or linoleum. And it is much easier to calculate the cost of goods in linear meters than in square meters. For example, you need to buy a piece of carpet of a certain length with a width of 2.5 meters. In this case, it will not be very convenient to calculate square meters, because you will need to calculate the area of \u200b\u200bthe product, and then divide it into squares. In general, to carry out rather complex mathematical calculations.
With a running meter, everything is simple and in order to find out the cost of a product, you just need to multiply this unit of measurement by the length of the segment.
The linear meter is most often used to calculate the cost of such goods:
- textile;
- linoleum;
- carpet;
- finishing film and polyethylene for greenhouses;
- electrical cable;
- finished furniture;
- various cornices and pipes;
- railings and metal fences.
Most consumers believe that only roll materials can be calculated in linear meters. And such an assumption cannot be considered absolutely wrong, because in most cases we are faced with this measure when buying similar products with a specific width. But running meters quite often calculate the cost of furniture.
Let's consider an example for clarity. The furniture manufacturer approximately calculated that to fill the kitchen with a length of three meters, taking into account all the cabinets, shelves, doors and fittings, it would be necessary to use materials worth 30 thousand rubles. This means that one meter of furniture will cost 10 thousand - this cost is the price per linear meter. And thanks to such simple mathematical calculations, the manufacturer can immediately indicate to the customer how much this or that set of standard sample will cost him.
But there is one caveat here, the cost of a running meter includes the price of the cheapest material and accessories, and sometimes the latter is generally not taken into account. So if you see a too tempting offer, then you should learn more specifically about the content of the product. After all, this technique is often used only to attract new customers.
We know about what this unit of measurement is from the school desk. And remember that a square meter is needed to measure the area of various figures. And in fact, this measure is relevant for measuring any building materials and furniture. And if the width of the product practically does not affect the linear meter, then for a square this value is of great importance. For example, you need to lay linoleum in a room with a length of 3 meters and a width of 2.5. By simple mathematical calculations, we find out that the cut is 2.5 * 3 = 7.5 square meters.
This unit measures:
- area of the room;
- area of flooring surfaces;
- area of facing materials;
- area occupied by furniture.
As for furniture, this unit of measurement is especially relevant for small kitchens, where the area of \u200b\u200bthe headset plays a very important role.
Quite often, when buying certain materials, we need to convert one unit of measure to another and vice versa. But how to do this, because a linear meter is, in fact, a unit of length, while a square meter is an area. Do not despair, because it will be much easier to do than it seems.
In order to convert a linear meter to a square meter, you will need to know the exact width of the product, which the manufacturer takes as standard. And if everything is quite simple with the calculation of linoleum or carpet - we divide one linear meter by the width of the product and get the number of square meters, then with the calculation of furniture you will have to tinker a bit.
For example, in order to find out how many "squares" are contained in a standard kitchen 5 meters long. You will need to measure the width of the floor units, not the height of the kitchen unit. Let's say it is standard 60 cm (0.6 meters). Now you need to multiply these parameters among themselves: 5 * 0.6 = 3 square meters. In this simple way, you can calculate the area occupied by the kit and measured by "squares".
Everything is measurable. It is a fact. But the values used are different. Most of the products that are rolled up, which relate to fittings and kitchen products, are today measured in linear meters. To be more precise, a running meter is how many meters in length. The width is not taken into account.
In one store, these stripes are in this form. But in the other there is just one wide strip of 3 meters long 10 meters. In essence, this is what we need. Since the cost is indicated in linear meters, in the first store we will pay three times more than in the second. The savings are huge!
Remember, 1 linear meter is 1 meter of the product in length. And then it doesn't matter what the width is. The price will not change.
Carefully!
Very often, only the number of linear meters and the price are indicated in the product information card. This means that we do not know anything about the width of the product. If you buy everything in a store or market, you can bring your own tape measure.
On the Internet, such data is often hidden. You can not order a product without making sure of its parameters. It is worth calling the store and find out its width.
When you find two identical items with different prices, do not rush to order the cheapest one. It is possible that the width of that product will not suit you.
Marking the fabric is a matter, although not simple, but accurate. With kitchens, which are also measured in linear meters, everything is much more complicated. Usually, we take into account 1 meter of standard headset. That is, simple cabinets and tables are always used for miscalculations. All additional elements decorations are negotiated separately.
If you buy a ready-made kitchen, then information about running meters is not particularly important. You already see the finished price tag and decide whether the price is right or not. But with individual orders, you need to carefully consider everything.
It is important to emphasize that one can never know in advance the exact amount. We can only judge the minimum cost of 1 linear meter of your future kitchen.
There are two popular situations in which the answers are completely different:
1. Accurate calculation. You order an ordinary kitchen, where all drawers, cabinets and tables have standard sizes. You don't change anything. The final price may differ slightly from the planned one.
2. Completely inaccurate calculation. The kitchen is completely original. All cabinets and drawers are designed for your convenience and size of dishes and furniture. The headset fits exactly into the design of the room. The final price may be several times higher.
Why is the total going up?
It is difficult to translate linear meters. And for the sake of a new idea, you have to put up with the pricing policy. To cut costs, it is worth connecting different components. That is, it is necessary to use as many standard elements as possible, diluting them with custom ones. So you get a kitchen that fits well into the interior, and save your budget.
Don't forget that different materials and designer features add value. One linear meter of a locker can become more expensive if you decide to install not 4, but 5 drawers in it. Each detail requires additional expenses. Carving or decorative stickers are far from cheap.
Alternative to running meter
Many shops calculate the price based on ready-made kitchens. You choose the model you like, see its price, and then change it a little, if necessary. In such cases, it is easier to evaluate a future purchase.
As a result, we see that a linear meter is a value by which many goods are measured, from fabric to kitchen. It defines the length without specifying the width. In order not to make a mistake in the purchase, you need to clarify all the points. If the Internet refuses to tell you the width, then it's not worth the risk. After all, you can just lose your money.
Often, wanting to acquire certain Construction Materials and studying their prices, we are faced with the fact that different suppliers indicate prices in various systems units. For example, the question is often asked how many square meters in a running meter?
Let's say you're buying lumber. In one square meter of different lumber (edge board, floor board, lining, block house), it is likely that there will be a different number of running meters. Why? Because the number of square meters also depends on the width of the material.
Here's an example:
The edged board has parameters: 40x120, that is, its thickness is 40 mm, and its width is 120 mm. You need to calculate as follows:
Divide 1 square meter of edged board by 120 mm (product width), we get the value - 8.33. This is the number of linear meters.
1 sq.m. / 0.120 m = 8.33 l.m.
We multiply the number of running meters by the width of the product and get the number of square meters in a running meter.
For our example:
8.33 p.m. x 0.120 m = 0.9996 sq.m (1 sq.m.)
It turns out that for a given width of the product in one square meter there are 8.33 linear meters.
Another example:
The floor board has the parameters: 28 x 130, then:
1 sq.m. /0.130 m = 7.69 l.m.
Linear meter - indicates the length of the product, and square meters measure the area of \u200b\u200bthe product. Therefore, to determine the area of \u200b\u200bthe product, two parameters are needed - length and width.
Expert comment
Igor Voropaev - leading lawyer of "Prosper-Consulting"
PropertyExperts Portal Consultant
I worked for a finishing firm for several years, and I can say that at first, measurements were our biggest headache. Several times in a row, customers not only didn’t know what design they were interested in, they also didn’t want to hear about measurements, giving the standard answer “we will calculate everything ourselves and buy it.”
Since we couldn’t come to someone else’s apartment on our own and measure the amount of necessary products, the problem of constant errors in the volume of the room, the height of the walls and ceiling, the weight of the putty, the width of the linoleum roll, the size of the coating led to sad results - we already got used to it. Out of the first ten times, the results, equal to the accuracy of the cubic centimeter to those that exist, were obtained by the customer only two times.
There were also those who bought five meters more pipes than was necessary, also of a different diameter (they said that they measured conditionally), as well as those who brought a piece of fabric half as much as the designer requested (the furniture seller advised so, actually decided to save). The apogee was the case when customers managed to purchase rebar for the site per hectare more than they needed. After that, the concept of "independent measurement" for us immediately ceased to exist. We decided to accept orders only according to our understandable measures and we advise everyone to do so!
One who does not deal with sewing or furniture production, often asks the question: "1 linear meter is how much?" In fact, this is the same unit of measurement that everyone is used to dealing with every day. Most often, such a measure is used for orientation in the length of materials, most often fabrics.
Method of measurement with a running meter
Running meter - how much? In order to answer this question, you should know that such a measure has the same 100 cm. The only thing is that if it is used to count the fabric, then only the length is taken into account, while the width is not taken into account.
By the way, the same applies to the purchase of pipes or electrical cable. The direct length of the product is taken into account, without taking into account the diameter or section. The same system can be used for building materials such as linoleum or skirting boards. That is, a linear meter is used when other indicators do not matter, for example, for rolls.
But here you can often find on the price tags that the same sealant or insulation has a cost per 1 square, and not a running meter. How much does it come out then? Let's consider the difference between them.
A few words about the square measure
A square meter is an area, for example, of a land plot, premises, building and other materials measuring 100 x 100 cm. If the area has different digital values of the sides, then the length and width indicators are multiplied by each other and a measurement is obtained, which is indicated by square meters.
This measurement system is most often used specifically for living space, since rooms rarely have equal sides. Purchase facing material for the floor or ceiling, and for walls too, it is calculated from square meters.
What is the difference between a running meter and a square meter?
Square and running meter - how many in centimeters? In fact, the common moment in such measurements is only the length, which is 100 cm, and then there are differences. The fact is that the square value is intended to calculate the area, while the linear value affects only the length, without taking into account the other sides of the material.
You can only convert from one unit to another if you have a width value. Then, for example, if the fabric has a length of 1 linear meter (how many in centimeters? - 100), and a width of 2 meters, then these two numbers must be multiplied together. The result is the area of such a piece of matter.
Measuring for kitchen areas
As for the kitchen, this system is also applied here. A running meter of a kitchen is how much? And what can be measured there? In this case, the measure is applicable not to the area of \u200b\u200bthe room itself, but to the furniture set.
In this case, all elements that are located along the walls are taken into account, for example, a table or shelf, a cutting surface or a cabinet, and other modules. The price is indicated with the calculation for the entire set, with how much it will take up space in running meters. But there may be a cost of a separate unit, then in this case the figure is multiplied by the number of elements in the headset, and the final cost is obtained.
It’s worth mentioning right away that not all sellers indicate the full price. Therefore, you should immediately clarify whether furniture fittings are included in the indicated price, otherwise you may not calculate your finances.
Measure for tubular materials
Running meter of pipe - how much will it turn out? In this option, the weight of the products is often used, therefore the price tag has the appropriate designations. In fact, few are interested in why there is such a system of measurements.
Depending on the purpose, each pipe can have its own cross-section and wall thickness, in addition, the execution material itself can be different. But if you take two identical pipes with the same circumference, one meter long, but with different wall thicknesses, it turns out that they will weigh differently. Usually the weight category is assigned according to GOST. But rarely when the seller has such documents.
It is logical that the question arises: “For pipes, a running meter is how much? Will this information help calculate the weight? There is a formula for this:
The thickness of its walls is subtracted from the diameter of the product, then this value is multiplied again by the wall thickness, and then by 0.025 kg, as a result, the mass of the 1st running meter will become known.
For calculations, linear measurements are made in millimeters.
Rebar measuring system
Reinforcement serves to create a more reliable structure, especially with regard to country houses. It is also calculated using the running system.
To do this, all the necessary rods are measured in length (if they are different) and the resulting amount is multiplied by the mass of the 1 linear meter. To determine this value, there is a special table that will allow you to calculate in what percentage the building will be reinforced. For independent calculations, the formula is used: 1 m x (0.785 x diameter x diameter) = reinforcement volume. The numbers indicate the geometric area of the circle. The diameter is taken in meters. The resulting value must then be multiplied by the specific gravity of the reinforcement, which is equal to 7850 kg / m 3.
