Non-woven adhesive for paper wallpaper. What glue to glue paper wallpaper How to stick paper wallpaper

Updated:

2016-08-21

Today we will talk about how to properly glue paper wallpapers and what technologies and subtleties must be observed. The wallpapering process is not that complicated. But still we recommend that you study all the instructions in advance, understand the essence of the work, watch training videos. Only after that you can proceed directly to the procedure for applying the paper web on the surface of your walls.

The peculiarity of paper wallpapers is that they can be glued in any room where there is moderate humidity and air pollution. That is, they can end up in your bedroom, living room, office, and even a child's room.

If the room is damp or is associated with frequent contact with a humid environment, then we strongly advise you to refuse paper sheets. They are not particularly friendly with moisture, so soon the repair will have to be redone.

There are two types of paper wallpaper:

Simplex. Such canvases are created from one layer. For drawing drawing use technology of a deep or flexographic printing. Coloring elements are water-dispersed paints;
Duplex. There are at least two layers, plus the wallpaper is equipped with an additional protective coating. In the manufacture of several layers are connected by gluing. Such wallpapers are more resistant to moisture, wear, mechanical damage, sunbeams. But their price is much higher.

Advantages and disadvantages

Despite the abundance of alternative options for paper wallpapers, they still remain very popular. This can be explained by a list of advantages, which include:

Environmental friendliness. Paper wallpapers are completely safe for health, because they can be glued even in rooms where small children live;
financial availability. When compared with other types of wallpaper, paper ones are the cheapest;
Diversity. On the market today you can find paper wallpapers that have the most diverse color, structure, pattern;
Ease of use. From the point of view of pasting, paper sheets are almost the simplest. Even a beginner can handle them;
Breathability. The material is highly breathable, which makes the material breathable.

But do not rush to rejoice too much, because before repairing it is important to learn more about weaknesses ah one or another type of building, finishing materials. Not without flaws and paper wallpaper. Their negative aspects include:

Susceptibility to mechanical influences. Accidental scratches, impacts with hard objects will certainly leave their marks on the surface;
They are not "friends" with water. Once the paper canvas is wetted, it immediately swells, loses its shape, color. The consequences of contact with water may lead to the need to replace the wallpaper;
Relative fragility. Even if you choose high-quality paper-based wallpapers, they are suitable for use for no more than 7 years.

Sticking

Now directly about how to glue paper wallpaper. Many people have certain ideas about how this kind of work is done. But still we advise you to read the detailed instructions, watch the video tutorials.

A visual demonstration of all the nuances of the wall pasting process will allow you to do the job efficiently even for those who do not have experience in self-repair.

Wall preparation

It all starts with the preparation of the surface on which you will stick paper wallpaper.

Remove old canvases. Depending on the type of wallpaper you have previously used, the process for removing it may be slightly different. It is enough to moisten the paper ones with warm water, after which they can be easily removed with a sharp metal spatula. Moisten more durable canvases with soapy water and add a little glue there. The cleaning process can sometimes take a long time, but it is important to do everything carefully here.
Remove paint. There may be paint under the wallpaper. Or the walls themselves could be painted. If it is enamel or oil paints then sand the surface with coarse sandpaper. To remove whitewash and water-based emulsion, the walls are moistened with soapy water, then arm yourself with a spatula and remove the finish layer. Still easy with thin layers of whitewash. Arm yourself with a sponge and warm water, remembering to change the water to clean.
Get rid of existing defects. Treat all kinds of irregularities, cracks, chips with plaster, apply a layer of primer. This will make the walls stronger, plus provide better adhesion of the wallpaper to the surface.

Tools and materials

To prepare and paste over the wallpaper, you will need a certain set of tools. It includes:

Scissors or a sharp knife;
Pencil;
Roulette;
Brushes and roller for glue;
Capacity for the preparation of glue;
Sponge to remove excess glue;
Dry rag.

Working with rolls

Let's figure out how to glue paper wallpaper with everything you need to work.

Roll out the roll on a flat surface with the pattern facing down. It is best to do this on the floor.
Apply markings, taking into account the height of the walls.
Mark where the top and bottom are on the cut canvases. This is especially important if you need to follow the pattern when gluing.
The wallpaper should be cut off with a margin of about 10 centimeters. This is due to the height difference. The excess is then cut off or hidden under the plinth. Much more difficult when the length is small.
Mark the walls. Before sticking paper wallpaper, decide where you will start. Do it from a window. Try to make the most even markings for the first canvas, given the height of the ceiling and the width of the roll. Use a plumb line. The evenness of the entire wall pasted over with paper wallpaper directly depends on the even laying of the first canvas.
Prepare the adhesive according to the manufacturer's instructions. Glue choose exclusively for paper wallpaper.
Let the solution stand for a while, then apply it with a wide brush to the surface of the canvas.
A little glue is also applied to the wall. It largely depends on the type of wallpaper.
If we are talking about light paper wallpaper, then they can be glued with an overlap. Thicker, dense canvases are glued strictly end-to-end.
Fold the glued element into two parts so that the upper part occupies 2/3 of the length of the canvas, and the lower part 1/3. Let the wallpaper set.
Grasp the middle of the folded canvas, gradually detach the upper part, holding both ends of the canvas with your fingers.
The assistant, meanwhile, will detach the lower part. Since you will be in a chair or stepladder, help will be indispensable.
Attach the canvas to the surface, focusing on the applied markings.
After gluing the first canvas, smooth it with a dry cloth, go over the surface with a rubber roller, moving from the middle to the edges. So you can get rid of air bubbles that are sure to form under the wallpaper.
Then everything is simple - focus on the previous canvas, glue the second tightly butt to it. At the corners, it is easier to cut the canvas into the desired parts, although you can try to glue the whole canvas in the corner. This will require scissors and patience. Step by step, and you will be able to stick all the prepared canvases.
After completing the work, prevent the possibility of drafts, let the wallpaper dry. After that, the excess is trimmed, a plinth is installed.

Paper products have their pros and cons, but still their popularity clearly indicates that no one is going to refuse them. They are versatile and easy to work with. This is a budget repair option that everyone can afford.

For fast way interior renovations in the room most often resort to the use of wallpaper, since this type cosmetic repairs is the simplest and most affordable. The modern market offers many different color options that will satisfy any whim of buyers.

Sticking paper wallpaper is one of the ways to quickly update the interior of a room.

After a successful purchase, most of us are thinking about how to stick paper wallpapers with our own hands, because we want to reduce the cost of repair work. Self-sticking wallpaper is within the power of everyone, but first of all, it is necessary to study some of the nuances of this process.

To begin with, it is worth noting that the wallpaper is divided into several categories: non-woven, cloth, vinyl, paper, artistic and photo wallpaper. Certain varieties require a special approach when processing and applying to walls. In this case, the features of the surface for gluing are taken into account. Below is a detailed description of the process of pasting walls with paper wallpaper with a mention of all the nuances of this procedure.

Regardless of the wallpaper category, the first stage of the upcoming work is preparation for gluing, since this stage is considered conditionally the same for all varieties and does not have any differences. It is worth taking the preparation with all responsibility, since the final result of your efforts depends on it.

Preparatory work

For the upcoming work, it is necessary to prepare the following materials, tools and accessories:

a set of paper wallpapers;
wallpaper glue;
primer mixture;
3 spatulas of different sizes;
spray;
putty, sandpaper, dispersion paint (if necessary, wall treatment).

The preparation for wallpapering reflects 50% of the quality of the final effect. Neglecting this stage can easily nullify all your efforts, not to mention the fact that expensive building materials will be wasted. To prevent this, certain rules must be observed when performing work.

First of all, you need to thoroughly clean the treated coating. It should be uniform, dry and well impregnated. Do not reassure yourself that the flaws on the walls will hide under a layer of wallpaper. They will definitely make themselves felt in the form of non-glued sections.

To ensure uniformity, it is necessary to clean all existing cracks and loose areas. These places need to be puttied and sanded after a while. If you don't want to wait a long time, you can use a wet rag to clean off excess putty. Do this with extreme care, as the wet putty must not come off the surface.

If there are old wallpapers, they must be completely peeled off. Most often they are removed quite simply, but sometimes you have to tear off the wallpaper piece by piece. In this case, you should moisten the surface of the wallpaper with a spray gun and wait until they get wet. After that, the wallpaper is easily peeled off with a spatula. It is not necessary to remove small pieces, it is most important to remove large excesses from the old coating.

Upon completion of the removal of old wallpaper, it will be necessary to prime the walls. As a mixture, you can use wallpaper glue, which is diluted with ordinary water (the proportions are indicated on the package), or purchase a primer mixture for gluing, sold at any hardware store.

If the wall is concrete or has previously been plastered, it is necessary to putty, prime and paint the areas for gluing. This will prevent strong absorption of the wallpaper paste and will adapt the surface for wallpapering.

The painted or varnished surface must be thoroughly cleaned with emery and a spatula. After cleaning is completed, dispersion paint is applied to the smooth surface, which will ensure good adhesion to the adhesive. water-based paint can be washed off with plain water, and loose areas can be cleaned with a spatula.

Most optimum temperature for gluing - 20 ° С. If this threshold is exceeded, there is a risk of bubble formation and web edge peeling. When the temperature drops below 17 ° C, the wallpaper dries much longer. In this case, noticeable adhesive spots may appear on the canvas. Therefore, the room to be processed will have to be hermetically sealed in order to protect the surface of the walls from weathering during the drying of the glue.

In case of successful completion preparatory work the end result will be of high quality.

Back to index

To, first of all, you need to read the manual that comes with the kit. Any package indicates the necessary information that displays the features of gluing a particular type of wallpaper. For example, the combination of the pattern, if any, the type of glue and the principle of joining paper sheets.

Glue is recommended to be purchased immediately after selecting the wallpaper you like. Read the requirements on the packaging and contact a consultant at a hardware store. Paper wallpapers are not so demanding in this regard, so several types of glue are usually indicated on the roll, which are suitable for work.

Back to index

We prepare paper wallpapers

Before proceeding with gluing, you will need to carefully cut the canvas right size. If there is a compatible pattern, the size of all canvases is calculated by the distance from floor to ceiling with a 10-15 cm reserve.

If there is no pattern on the canvases, when cutting, you need to take into account the offset distance (rapport), which is indicated on the package. In this case, the pattern will shift on every second canvas. Do not forget that the roll must be untwisted in one direction. Finished canvases of the desired size are stacked on top of each other face down. The stack should not exceed 10 sheets, as they can be creased under high pressure.

Back to index

Apply glue to wallpaper

Make sure the wallpaper paste is the same brand as the one on the package. powder mixture it is necessary to mix with water in the right proportion (indicated on the package) in a small container and leave for a while so that the glue swells.

If the wallpaper is quite heavy, it is advisable to use a special type of glue intended for heavy canvases.

Depending on the basic composition of paper wallpaper, the method of pasting the room may change. The composition can be either completely paper, or with an admixture of non-woven fabric.

In the first case, the back of all segments is lubricated, after which they are stacked on top of each other with the back side, that is, the front part should be out. In this position, the glue swells for a certain period (indicated on the package). The duration of swelling depends on the thickness of the web. The thicker the layer, the longer it takes to swell.

The paper base implies an increased degree of fragility of the canvas. Therefore, in the process of applying glue and gluing to the wall, try to be more careful with wallpaper, as they are easily torn due to a small margin of safety. Paper canvases intolerant of high humidity, it is recommended to take care of this indicator in the renovated room.

It should be borne in mind that during the swelling process, the wallpaper is slightly stretched, so the exposure time should be the same for all paintings. The glue is applied in a dense layer both on the back of the canvas and on the wall for gluing.

In the second case, only walls are processed with glue, since non-woven wallpaper contains an adhesive base in its composition. The main advantage of this type of wallpaper is the absence of a period for exposure and impregnation. Wall treatment methods differ depending on the brand of wallpaper, so it is recommended to consult the instructions on the packaging.

Do-it-yourself repairs save cash and allows you to perform certain work more efficiently, because a person does everything for himself. There are many features in the wallpapering process that you should know in order to complete all the steps quickly and competently. We suggest that you familiarize yourself with the full instructions, supplemented by photos and videos so that your repair brings you only positive emotions, and the work performed is of high quality.

Preparatory work

Initially, a number of preparatory work should be performed, which can also include the choice of wallpaper, glue and the process of preparing the wall for applying the material. Initially, you need to study the wallpaper market in order to select options for color, size and special qualities.

Today, paper, non-woven and vinyl options are relevant. Paper ones are relevant for the reason that they are inexpensive, and the process of gluing them will be quite simple. Nevertheless, non-woven wallpaper one meter wide is considered a better and more rational option. These wallpapers are stylish, original, high quality. In addition, sticking them will not cause any special difficulties.

Adhesive selection

Very important element finishing works on pasting is glue. When choosing, you need to give preference to options with the following characteristics:

Chemical neutrality;
After drying, the glue should be transparent;
It must be environmentally friendly.

Depending on the type of wallpaper used, you can choose the right brand of glue. If it's paper wallpaper, normal fit glue that is diluted with water based on clear instructions (placed on the glue package). For paper-based synthetic wallpaper, it is recommended to purchase glue containing synthetic resin (the same glue is required for non-woven wallpaper). For wallpaper for painting, you should purchase a particularly strong adhesive - dispersed already in finished form. For velor options, a special adhesive is used.

Wall preparation

The preparatory process begins with the removal of old coatings from the wall. If the wall was covered with wallpaper, then they must first be wetted with water, for this it is better to use a sponge. You should wait until the wallpaper is saturated, after which it can be easily removed with a metal spatula.

If the walls have been whitewashed, they should also be wetted with water and removed with a metal spatula. To clean the wall of paint, the surface is initially treated with sandpaper (with coarse grain), after which the peeled paint is removed with a spatula.

After removal decorative coating you need to inspect the wall for defects. If there are cracks and chips, they must be puttied, then we carry out the process of priming and drying. Due to the fact that the wall will be initially primed, this will increase the level of adhesion and reduce the consumption of glue. For the initial treatment of the wall, it is better to take a special primer, or you can use glue diluted with water (no more than 30% water is added) and treat the wall.

What tools will be required?

To carry out the gluing procedure, you will need a set of such tools:

Stationery knife;
Roulette and plumb;
Scissors and bucket;
Roller and brush;
Clean rag (necessarily soft).

on paper and vinyl wallpapers glue should be carefully applied to the strips. If you are using non-woven wallpaper, then the glue is already applied to the wall. When you prepared the wall and prepared everything necessary tools, you can start wallpapering. It is recommended to turn off the electricity when working in the area of switches and sockets.

Step by step instructions

Step 1: Preparing the Wallpaper

If the wallpaper does not have a pattern, then the process of cutting the wallpaper will not be difficult. If there is a drawing, then you will have to immediately measure and fit, otherwise certain difficulties may arise in the pasting process.

Step 2: Start pasting

Start the pasting procedure should be exclusively from the window. In many rooms, the corners are not as even as they should be. Therefore, before gluing the first strip, it is necessary to draw a vertical line along the plumb line on the wall.

Step 3: Applying glue

Glue should be applied with a roller or a wide brush on a pre-prepared canvas. It is necessary to withstand a certain amount of time for the material to soak. So, paper wallpapers are impregnated within five minutes, if the material is dense - 7-8 minutes, after applying glue to textile wallpapers, it is necessary to withstand at least ten minutes. When using non-woven material, glue is applied to the wall, after which pre-prepared strips of material are glued to it. Be sure to make a slight overlap on the baseboard and ceiling, so that in the future it will be possible to carry out alignment if necessary.

Step 4: Smoothing

After applying a strip of material to the wall, smoothing is required. To do this, you can use a rubber roller or a dry, clean rag. If significant folds form, you need to tear off the strip and then carefully glue it back. Remember that you can not stretch the material by the edges, because after drying, you will get cracks at the junction.

Little tricks when sticking wallpaper

You need to start the pasting process from the window, finish above the door;
It is recommended to stick the strips vertically, while you can use a laser level or a plumb line to mark the boundaries of the intended location of the strip on the wall;
When carrying out the process of wallpapering in the area of \u200b\u200bswitches and sockets, it is recommended to remove them, so you can eliminate unnecessary difficulties with cutting holes inside the strip. First you need to turn off the electricity in the house;
If there is any excess (overlapping on the baseboard or ceiling), it is better to cut them off after drying.

We also recommend watching the instructional video - .

Probably, in our country it is impossible to find a person who has not tried to glue wallpaper on his own at least once in his life, because this process is an integral part of any repair. Despite the fact that today the construction market offers a huge range of wall paintings made from the most different materials, many people still prefer the classic paper cover. That is why quite often the question is asked how to properly glue paper wallpapers so that they do not bubble and move away from the wall.

Glue paper wallpaper (click to enlarge)

Varieties of paper wallpaper

Such a wall covering can be of several types and types, each of them has its own advantages and disadvantages:

smooth. Consist only of paper, without any impurities, can be either plain or with a pattern that is applied by printing;
duplex wallpaper. They are made of two layers by pressing, the first acts as a base, the second - as a pattern. A special protective coating is applied to their surface, which makes the canvases resistant to mechanical stress. This type of coating is considered one of the most reliable, since it is not afraid of moisture and is also not afraid of fading;
paper embossed. They are two-layer, differ in relief pattern;
Look at the types of wallpapers (click to enlarge)
embossed duplex. An environmentally friendly product that differs in the manufacturing method. Patterns are applied to the canvas with a special roller, while it is still wet. This coating is great for coloring, but is most often sold on the market in a white version;
structural. On their surface are added various materials(sand, shells, sawdust), which help to give the drawing an unusual look;
foam wallpaper. They have a thick layer and a three-dimensional pattern, are made using a special technology;
moisture resistant. The surface is treated with a special protective coating that prevents moisture from penetrating inside.

What is their advantage

Why are paper-based wallpapers so loved by people from all over the world and still do not lose their relevance. In fact, everything is explained by a number of the following advantages:

such canvases are environmentally friendly, they can be glued even in a children's bedroom;
suitable for finishing almost any type of premises;
have an affordable price;
sticking wallpaper of this type will not cause difficulties, even a beginner can cope with it;
allow walls to breathe and do not interfere with air circulation;
have little sound absorption capacity.

Watch the video to see the benefits

As for the weaknesses, they also could not do without them. Paper-based wallpapers are highly susceptible to moisture, they are not recommended to paste over the room if the humidity in it is more than 50%. Also, such canvases are not entirely suitable for finishing the kitchen, since they are not recommended to be washed, and they will constantly absorb third-party odors.

Required Tools

Sticking paper wallpaper should begin with preparation various tools, utensils and materials that may be useful during the repair. In order to do a quality job, you will need to acquire the following inventory:

Advice! There should not be a draft in the room in which paper wallpaper will be glued, otherwise all the work will go down the drain. Therefore, before proceeding with active actions, it is strongly recommended that windows and doors be tightly closed.

Wall surface cleaning

Before learning how best to stick wallpaper on concrete walls, it is necessary to prepare the surface in advance. From the walls it will be necessary not only to clean off the remnants of old wallpaper or paint, but also to prime and putty them. In no case should this stage be ignored, since it will help to achieve the best result, and the canvases themselves will firmly grasp the wall and will not bubble.

Learn more in the video:

If the old coating does not come off the wall, it will need to be wetted with a spray gun, and all this should be left to act for several minutes, after which the wallpaper should come off easily if you pick it up with a spatula. You can also facilitate the work with a special steamer or iron. When the wall is completely cleaned, it will need to be properly puttied (large recesses are best masked with plaster) and primed in 2 layers.

Take note! If the wall is too bumpy and uneven, it is better to glue duplex wallpaper, as they are voluminous and dense and can smooth out some of the bumps. If you glue paper-type wallpaper (standard), after drying, they will only emphasize the imperfections of the wall.

How to choose glue

What kind of glue to glue the wall cloths so that they are securely fixed and do not begin to move away over time? Experts say that paper wallpapers are good because they can be glued to virtually any type of composition, even non-woven, even vinyl. But if you have the opportunity to purchase a quality product designed specifically for fixing such material, then preference should be given to it.

Learn more from the video:

The best option is CMC glue, which is sold in powder form. This product has ideal adhesive properties and is quite affordable. It is also not difficult to dilute it, all that is required of you is to pour a small amount of powder with warm water according to the instructions, and then mix everything thoroughly. After that, the solution will need to be left to infuse for several hours and do not forget to stir occasionally.

Glue CMC (click to enlarge)

If the glue is over, and you have no time to go to the store, in extreme cases, you can use the usual paste, which is made from flour and water.

Wall marking

How to glue paper wallpaper on the wall? The gluing technology begins with marking the wall and cutting the canvas itself into strips. desired length. The roll will need to be rolled out and reverse side put marks on it for cutting strips, after adding 5 cm to each of them. If there is a pattern or pattern on the surface of the material, you will need to make sure that they match. If you are not sure that you can cut the wallpaper so that the pattern matches, preference should be given to plain canvases.

After that, using a plumb line and a pencil, the walls are marked. The main task is to draw a straight vertical line on the wall according to the plumb line. It is best to markup from the window, clockwise.

Canvas preparation

In order for the strips to be securely glued, they must be carefully coated with glue. Usually the canvas is simply rolled out on the floor, and the composition is applied to it from the back. Glue must be applied to the surface very carefully, trying not to get it on the floor and not stain the wallpaper on the other side. After 10 minutes, the canvas will be completely saturated and will be ready for use.

Take note! If you are gluing paper-type wallpaper for the first time, apply glue to the canvas in a fairly thin layer, otherwise it may simply start to open and become unusable.

pasting process

Whatever type of wallpaper is chosen, they begin to stick them from the window, while referring to the vertical plumb line. Subsequent strips are glued, referring to the previous sheet of wallpaper. When finishing the corner, the wallpaper must be cut a little along the vertical line from above so that they do not bulge and fit completely against the wall.

Watch the video to find out more:

After the work is done, the room will need to be closed with a door to completely eliminate the occurrence of a draft. After a few days, when the glue is completely dry, the repair will be completed.

Now you know how to glue paper wallpaper and achieve a good result at the same time. For the sake of justice, it is worth noting that this task is quite simple and, if desired, any beginner who first picks up construction tools can handle it.

Few people in our country have not tried at least once wallpapering. Of course, you can hire a designer, a team of finishers and return to a house smelling of fresh renovation. And you can go through the search for the right color yourself, disputes with your spouse, children about the pattern and tone, gluing, which dragged on until almost morning, and the first rays of the sun playing on a piece of wallpaper that has lagged behind the wall ...

How glue paper wallpaper and enjoy it, we will find out today.

History of paper wallpapers

Paper wallpapers have been used by man for decoration for many centuries in a row. For the first time, the Chinese began to paste over their homes with rice paper. Later, the secret of creating paper became available to the people of Japan. And around the XII century, the question "how to glue paper wallpaper" was also puzzled in Europe. Here they decided not to weave the pattern on the canvas, as on carpets, but to apply it to the finished surface.

And today, when the stores are full of vinyl, non-woven and other wallpapers, and fashion designers advise to simply paint the walls, paper wallpaper do not go out of fashion and do not become less popular than before. Why? The advantages are obvious:

Paper wallpapers are cheap and accessible to any pocket.
Anyone, even a teenager, can paste over a room with paper wallpaper, if desired and with some skill.
Paper wallpapers are easily glued in a room where the humidity is less than 40-60%, that is, almost everywhere in the house
Paper wallpapers are environmentally friendly, easily breathable, and have some sound-absorbing ability.

Of course, there are also disadvantages - paper wallpapers are fragile, quickly fade in the sun and absorb odors.

Preparing for wallpapering

There is nothing more difficult to repair than choosing wallpaper, especially if you do it together with the second half. As a rule, tastes differ and a compromise is impossible, and therefore the question “how to glue paper wallpapers correctly” sometimes freezes at the level of “how to choose them”. In this case, try to take into account the recommendations of the designer:

Paper wallpapers are made in one layer, drawing a picture from above, - simplex. The main plus here is the price and simplicity. Country option, if you do not have a chalet or a villa outside the city. Wallpaper composed from two layers - duplex- are more reliable, they burn out less and are forgiving to a wet wipe in case of contamination.
A large pattern looks great in a large room, but does not fit into a small room at all. The same with a small pattern, only exactly the opposite - in a studio apartment, for example, it will simply get lost and merge into one canvas.
We lighten dark rooms with pastel, warm wallpaper, and those facing the sunny side can be glued a little darker, adding a rich tone.
The interior should be in harmony with the wallpaper in the room, because the classic small flower will completely “kill” your high-tech headset. Textiles are also kept in tune with the general mood.
Shades of red are exciting, rich brown is depressing, turquoise is refreshing, yellow is uplifting, but if it is a poisonous acid shade, it causes irritation.

The next moment of preparation for gluing is cleaning the surface of the walls from old wallpaper, paint, putty and leveling, priming the walls. This stage is the most boring, tedious, but almost the most important - when paper wallpaper dry, all the bumps will immediately catch your eye.

Often old wallpapers do not want to part with the wall. They need to be wetted, wait a bit and clean off with a spatula. Sometimes such wallpapers are ironed with a hot iron through a wet cloth, and ammonia or soda is added to the water.

Before wallpapering, you need to turn off the electricity in the shield and remove the covers from the switches and sockets. We apply the canvas to the wall and make a cross-shaped incision in place of the outlet. So the paper strip will stick to the wall much better, and we bend the corners and, if necessary, cut them off a little.

If it is possible to remove the old plinth, it is better to do this, and after gluing the wallpaper, replace it with a new one. In this case, the bottom of the wall will look perfect.

What glue to glue paper wallpaper

What is good about paper wallpaper is its susceptibility to glue. There are few brands that this wallpaper will not succumb to. You can put paper wallpaper on non-woven glue - it won't fall off! If there is no glue or it has run out, and for some reason you can’t get into the store, you can glue the wallpaper with homemade paste: pour flour into the water, stir and bring to a boil. Remove immediately, mix, cool slightly. Thicker wallpapers with warm paste stick better.

However, if there is a special wallpaper glue the price of which suits us, we will use it. Most often use glue for paper wallpaper - CMC. Sold in powder form. If not left in a damp room, it does not deteriorate for a long time. Glue is poured with warm water and mixed thoroughly. Then they leave it in the room where the wallpaper will be glued for 10-12 hours, until completely dissolved. Periodically it is necessary to mix. We initially pour a little water, but later we add it to the state of jelly, while continuously stirring.

For paper wallpaper, the Bustilat glue, as well as Gumilaks, are also suitable. Cooking is about the same as CMC, but it’s also worth reading the instructions on the box before work.

How to glue paper wallpaper

Back in the store, you took into account all the signs, letters and numbers on the rolls of wallpaper, and now, having opened them before gluing, you see that they are the same in tone. Paper wallpapers are accompanied by an edge. Sometimes it goes only on one side, and sometimes on both. If the wallpaper is thin, then you can overlap, then cut the edge on only one side. If they are tight, this seam will become noticeable, so we cut off both edges and glue them back to back. We are very attentive to the window: we glue it from the window, on the right side, and cut it off on the right side too. And then it is more convenient to remove the edge from the left.

Cutting and trimming is a very important step. We measure the height of the space that we will glue, adding a little "in stock". If the drawing is small, this “reserve” is enough for 10 cm, but for a large one, all 30 should be added. Sometimes the floors and ceilings in apartments are so crooked that only a horizontal curb can correct the situation. In accordance with the first strip, we cut the second, with the second we level the third and further. It is very important not to confuse the direction of the wallpaper when cutting, it is especially easy to make a mistake if it is a floral pattern.

Ordinary scissors are absolutely not suitable for cutting wallpaper - the edge can turn out to be uneven. We take a special wallpaper knife, we measure a straight line by a level or a ruler with a triangle, mark it with a pencil, bend it exactly according to the markup and cut it.

The remaining trimmings must be rolled up and removed, as they will be useful for small areas near windows, doors, and later for minor “patching” repairs, especially if children grow up in the apartment.

Before gluing the first panel on the wall, mark a vertical line. For this you can use plumb line with cord, rubbed with chalk, and better - laser level. All subsequent canvases must be glued strictly vertically. We begin to glue the wallpaper from the window. Mark a vertical line on each wall.

It is especially difficult to glue the corner: we cut off the wallpaper in such a way that the overlap on the other wall in the widest place (our apartments usually have almost no even corners) is no more than 3-5 cm. We will make several cuts with scissors so that the panel lies on the wall without wrinkles . The next strip is glued immediately from the corner along the newly set vertical line.

The wallpaper will lie on the wall evenly, without bubbles, and will not fall off if you pre-lubricate the wall with glue at a distance of the strip, apply glue evenly on the panel and, after applying the wallpaper to the wall, go down the strip with a rubber roller or a soft clean napkin from top to bottom, smoothing every centimeter and expelling air from the middle of the cloth to the edges. If necessary, we coat the edges with a thin brush and again pass with a roller or napkin.

Glue that has appeared on the front side of the wallpaper must be immediately removed with a damp sponge, otherwise it will appear ugly on the wallpaper after drying.

Thick paper wallpaper should be folded into twos after spreading with glue and wait about five minutes until they get wet. Thin wallpaper is glued immediately.

Wallpapering is more of a collective thing than an individual one. Of course, one person with experience and dexterity will be able to paste over a room, but it is much easier for two people to do this. And if you let children spread glue on a wall or canvas, hard work will turn into family happiness!

In order for the wallpaper to dry faster and remain on the wall, hugging it tightly, it is necessary to exclude the slightest possibility of a draft. It is also better not to use an electric heater, so that drying takes place naturally.

If a paper border was planned, it can be glued only when the wallpaper is completely dry.

Sometimes trouble happens, and the new wallpaper is torn. This place can be sealed by picking up the pattern and using a sharp knife, cutting out exactly the piece from the patch that will be inserted into the damaged area. When the wallpaper is dry, you will not find trouble if everything is done carefully.

Let's summarize our conversation on how to glue paper wallpaper video by watching and noting for ourselves the nuances of future repairs: