Paint shop with water curtain. Spray Booth with Water Curtain W3000 Water Curtain Booth
In organizations that paint cars, water curtain booths are often used. They are one of the most advanced options that allow you to create a coating for products of large dimensions, such as car bodies, parts, furniture, etc. Their design as a whole is a stainless steel room with ventilation of the supply and exhaust type, which operates on electric motors. The main working part is a heating element that heats the box to the required temperature and maintains the heat level during work. Lighting also plays an important role, because it should create an even, intense light space without shadows.
Painting booths
What is the difference between paint booths with a water curtain, as well as their advantage over traditional devices? In specially created conditions a fog of paint is formed, which then settles on the surface. But if in the usual cases there is a danger that toxic substances or vapors will still leave the room, then in such devices they are retained with the help of water. In addition, the liquid binds volatile ethereal substances that are present in such a chamber. Of course, this type of filtration is not yet a guarantee of the final disposal of harmful emissions, but still a significant reduction in their number.
Street spray booths
There are also spray booths operating in a closed air flow cycle; in this case, the air moves in a circle and is returned for reuse. And if it is not very well cleaned before starting a new process, then small droplets of dye will enter the room, which will polymerize. This can degrade the properties of the enamel, however, the curtain of water traps these residues.
Spray booths with a water curtain: stages of work
As already mentioned, this species cameras is similar to traditional devices. Air enters from the atmosphere into a limited space, while the suction is based on the operation of the fan. The air flow passes through many filters, and each of them performs a specific purification process. The quality of processing depends on the size of the holes in the filter material.
When the dyeing process begins, the air is heated by special heat elements. The temperature in the chamber rises. There are exit holes at the bottom of the device. They may be in different places. Through them, the air flow leaves the workspace, which is done with the help of fans. water curtain is placed directly in front of the line, which removes the exhaust atmosphere from the chamber. Thus, before leaving the box, the air crosses thin wall from water, retaining dense particles - they settle in the form of a suspension.
Actually, this design is a water filter. There are other possibilities when the air for cleaning is passed not through a wall of jets, but through a special container into which water is poured. At the same time, dense particles accumulate at the bottom, which then form condensate. In order for all harmful substances to precipitate faster, a reagent is added to such a container, which speeds up the processing processes.
The most advanced spray booths of this type have several levels of cleaning. The first of them is the passage of air through a continuous water curtain. This creates a wall of water, and its speed is always uniform. The second level provides better cleaning air masses from particles of dyes (internal cleaning). Here there is a complete liberation from impurities. The third level is the completion of the cleaning processes, which can be achieved through carbon based filters or other types of dry based filtration. At this stage, all paint particles disappear. Therefore, the fan will be protected from dye residues.
These are the main stages of operation of such cameras. This air cleaning system in water curtain spray booths helps to reduce toxicity to a minimum, and therefore the use of this type of equipment is considered mandatory in those industries where the use of liquid paints and varnishes is required.
Spray booths with a water curtain are perhaps the most advanced version of the design of painting systems. Equipment of this type is used for painting large-sized products, including car bodies, or individual body parts, various furniture structures, etc.
Any spray booth is based on the fact that air moves inside the system, which carries along a mist of paint, which evenly settles on the surface to be painted. And if in a traditional spray booth there is a possibility that harmful substances or paint particles will go outside the booth, then in booths with a water curtain, paint particles are retained by water. Moreover, molecules of harmful volatile substances bind with water molecules, which are in excess inside the spray booth.
Thus, the hit harmful substances into the surrounding atmosphere is drastically reduced. But it cannot be said that the water curtain gives a full guarantee that the release of harmful substances into the atmosphere is completely excluded.
In addition, there are chambers that operate on a partially closed cycle of air movement. In this situation, it turns out that the air that has already been in the chamber enters it on the next cycle. And if it is not enough to clean it before reuse, paint particles that have already begun to polymerize will enter the chamber along with air. And this can significantly affect the final quality of the coating. And the water curtain, which may have different design, delays paint residues.
How do spray booths with a water curtain work?
The spray booth with water protection is very similar in principle to traditional spray booths. Air is sucked in from the atmosphere into the closed space of the chamber. Air is sucked in by the fan. Air enters through a system of filters, each of which provides a certain level of purification. The smaller the holes in the filter material, the finer the cleaning.
The air during the painting stage is heated when passing through special heating elements. The temperature in the chamber starts to rise.
There are exit holes at the bottom of the spray booth. Moreover, they can be located in different places of the chamber (depending on the hole). Through these openings, the air, due to the operation of the exhaust fans, leaves the closed space of the chamber. And it is in front of the highway, which works to remove air from the chamber, that water curtains are installed, which can also have a different design. Essentially, air mixed with paint that exits the chamber passes through a thin wall of water. And all suspended particles remain in this water.
The water curtain can be considered as a water filter. Although there are options when the air does not pass through a wall of water, but through a special container with water. In this case, solid particles gradually accumulate at the bottom of the container, which then precipitate in a state of sediment to the bottom of the container.
In order to activate the process of binding by water of harmful substances in the air, a special reagent is added to the container, which is a catalyst for chemical reaction cleaning.
The most advanced water curtain spray booths support multiple levels of air purification. The first level is when the air passes through the frontal water curtain. The flow of water is a solid wall, and the speed of water movement is the same all the time. Water covers the entire surface of the front part of the curtain.
At the second level, there is a finer purification of air from paint particles. This is the so-called level of internal purification. According to experts, it is at this stage that the most complete air purification from paint impurities takes place.
The finest cleaning takes place on the final filters, which can be made on the basis of hydrocarbon technologies (carbon filters) or dry filters, which are made on a different basis. Here, literally all remaining paint particles are removed. Thus, the fan blades are protected from paint residues sticking to them.
The organization of the work of the spray booth involves the installation of cleaning systems, moreover, these systems take into account the main problem - the presence of paint residues in the exhaust air. Standard filtration methods are not effective, therefore, before entering the duct, the exhaust air passes through a water trap or curtain. In water, both fractions of the paint material and harmful impurities are best retained.
Features of water curtain chambers
The quality of applying paint in a garage with a brush and in a professional camera by spraying is very different. A high-quality coating can be achieved thanks to the unique microclimate, since the air in the working area is pre-cleaned and heated to the desired temperature. Dust ingress is critical for a freshly painted surface. Strict requirements for sterility and air humidity are observed in the room, but all this would be pointless if such chambers did not have effective ways fight against colorful fog - we are talking about fragments of paint that have not fixed on the surface to be painted.
For creating suitable conditions work, in such chambers an air circulation system is organized. At the entrance to the chamber there are filters that purify the air from large fractions, then the air is heated to a certain temperature and supplied to the working area. As soon as the painting process begins, some of the paint will lie on the surface and begin to set, and some will be in the air. Further, it all depends on whether the air will enter the filters in a natural or forced way.
Water, by its nature, cleans the air well from paint fractions, but special additives are added to the water to improve its properties. At the same time, it must also have dry filters operating in parallel. Water takes only fractions of the paint, but dry filters are no less important for the system, which purify the air before it enters the exhaust fan.
The principle of operation of the water curtain
A water curtain is commonly understood as a hydrofilter that cleans air flows from paint and harmful impurities. Separate cascade. injector and non-injector filters. The difference lies in the method of supplying the water flow for cleaning. When using a cascade filter, the curtain is produced by the shield; in nozzle filters, the curtain is created by nozzles. Vortex hydrofilters are used for active mixing of air with water.
Filters work like this:
- Exhaust air, where there are already paint particles, vapors and other harmful impurities, is fed to the screen. This can be done by a fan or air will get there naturally.
- Nanos is responsible for creating a continuous layer of water that is fed to the screen.
- As soon as the air stream collides with water, large particles are separated from it and enter a specially equipped bath.
- Then comes the second stage of purification, in which everything that remains after the first stage is removed from the air.
- Chaotic air currents are intercepted by the drop catcher.
Requirements
There is only one requirement - the system must cope with waste streams, respectively, it all depends on the intensity with which the spray booth works. If the load is large, then for better mist trapping, you can put an active water tray, which is a bathtub closed with a grate. The presence of nozzle filters obliges you to choose between screw or tangential nozzles:
- The presence of screw nozzles gives a more stable and stable water jet when colliding with air. But such systems are difficult to design.
- It is easier to make tangential nozzles, which have a less stable flame, but they are less likely to clog.
- The angle of the cone of the water jet should be in the range from 70 to 75 degrees, and the pitch of the nozzles will be determined from the angle.
The water flow is also regulated by the chamber owner. It depends on how quickly the water will pass over the screen or shields, as well as on the number of curtains. In such systems, the circulation of water is almost always closed, that is, for a certain time the same volume of water works in the system.
For high-quality separation of paint particles from water, with their subsequent removal, it is recommended to add impurities to the water. They turn paint residues into sludge that settles after a period of time. Antifoam agents should also be added, otherwise the water may start to foam.
Advantages and disadvantages
The advantage of such installations is that effective method there is simply no purification of exhaust air from specific fractions. The process is thought out to the smallest detail, including the subsequent purification of water from sediment. Another question is what needs to be worked out here effective scheme tailored to the needs of the camera. Impurities will need to be added to the water itself so that the water itself does not foam, and the paint sets better with the liquid, but does not clog into lumps. Water filters do not work separately from the main ventilation system, so you need to calculate exactly how much air should be removed from the chamber per unit of time.
The use of cameras with a water cleaning function is justified in all situations when it comes to professional painting. Since in this case you have to follow strict rules protection environment And sanitary standards. Equipping a water curtain for a non-professional camera is problematic both because of the price and because of the complexity of installation and further maintenance.
The use of spray booths with a water curtain allows you to improve the quality of the finish and eliminate the impact of harmful substances on humans and the environment, which is determined by various factors related to the size of the products to be painted, the volume and type of sprayed material, the duration of use of spray booths, environmental protection requirements, workers costs. For all cases, it is possible to select the appropriate spray booth with a water-filtered front suction system that ensures the sedimentation of solid particles. In this case, the product must be between the operator and the active curtain of the chamber. When choosing a stand, it is necessary to evaluate the size of the product to be painted and the need to use a cabin for the simultaneous work of several operators.
Distinctive characteristics:
- The camera is the leader in sales in Russia in this segment, occupying more than 40% of the market.
- Having all the necessary technical parameters, spray booths are 15-20% cheaper than analogues.
- They have all the necessary certificates for use in the Russian Federation.
- The long experience of operating this equipment in the Russian Federation (the first deliveries were made more than 5 years ago) speaks of high quality metal and a low level of corrosion of constituent elements.
- The optimal design of the chamber allows in the future to aggregate it with air injection and filtration systems to upgrade it into an overpressure chamber.
- The constant availability of equipment in stock and all the necessary spare parts allows you to immediately start operating this type of equipment and minimize the risks associated with its downtime.
- A wide product range allows you to choose the most optimal one depending on the width of the processed product or (if the product is much smaller than the width of the chamber) to use it simultaneously when working with several operators.
- To automate the painting process, the spray booth can be supplied with an automatic blank feeding conveyor (option), which leads to an increase in productivity by 2-3 times.
Basic equipment of the spray booth DF
The price of a spray booth with a pump
- load-bearing structure of the chamber, made of galvanized sheet metal.
- adapter flange for mounting the fan on the roof of the chamber
- a set of special dry filters for the aspiration unit.
- drainage hydraulic pump.
- hydraulic pump engine (Italy).
- connecting pipes and components for circulating water inside the chamber.
- frontal water curtain.
- a small raised settling tank located at the bottom of the chamber.
- fluorescent lamp - 2 pieces
- Electric control panel
- Supply voltage 380V/3/50Hz.
- mounting hardware kit.
- special electrical equipment
- further connection of an external air injection system is provided
The camera can be supplied with or without a fan. You can use your own fan of similar airflow capacity.
Compound: air aspiration unit with brass deflectors and standard motor (Italy)
- The back wall of the cascade type - the maximum spreading of water, i.e. no splashing.
- Ability to adapt to the dimensions of the room and non-standard execution.
- Fast delivery time - no more than a month.
- Constant availability of all components in stock - instant replacement in case of failure - extended warranty.
- The best prices On the market.
Convenient change of dry filters located above the water curtain.
The ability to quickly clean the camera, in an easily accessible way, as the rear lower part opens like a car hood.
A special drainage type pump in a special design that allows you to work even with water with large clots of paint.
Powerful explosion-proof fan, i.e. can work at a distance of 0.5 meters from working area cabins, 100% capture of all paint vapors, prevention of water dust on the product, the operator can work even without a mask. Even if you spray paint with a nozzle down from a meter height, the paint does not reach the floor and is completely captured by the water stand.
The principle of operation of water cabins:
With the help of a fan installed on the roof of the chamber, a vacuum is created, which ensures the suction of air, with the help of a water curtain (pos. 1), solid paint pigments are deposited. Washing with water and additional dry filtration (D) allows aerosols to be captured and deposited in the collection bath. The pump (pos.2) circulates water through the baths (A, B, C), overflowing from which forms water curtains. Some versions have two additional side curtains to optimize the first filtration stage. The chamber is made of galvanized metal panels bolted together. Side panels and partitions are load-bearing, a centrifugal fan is mounted on the roof. Execution in various modifications: only a suction front, a suction front with additional walls and an extended roof, plus bottom baths equipped with a grate, and there are also two height options. For fine cleaning chemical composition air, it is recommended to use a stand-alone KARB coal plant.
Accessories for water booths available on request:
- Engine power increase from 3 to 4 hp
- Explosion Proof Motor Italy
- Active floor (depth 280 mm, width 1120 mm)
- Side water curtains (for 2 pieces)
- Free standing water filtration unit (V standard equipment not required)
- Lamp design IP 55
- Version without roof, discount
- Version without side panels, discount for each
- Explosion and fireproof version of the control panel model "Standard-Eco"
- “Ecological” option (additional water curtain)
- Increase in working depth from 1.22 m to 1.5 m
- Increase in working depth from 1.22 m to 2 m
Specifications of DF Water Curtain Spray Booth
Characteristic name |
Characteristic value |
||||
External dimensions: |
2 600 |
3 100 |
4 100 |
4 400 |
4 600 |
Working height, mm |
|||||
Diameter of the exhaust opening on the roof of the chamber, mm |
|||||
Extraction capacity, m3/h |
|||||
Required fans, pcs. |
|||||
Fan power, hp |
|||||
Outlet, mm (L x W) |
|||||
Outlet fixture, mm |
|||||
Pump power, hp |
|||||
Unassembled camera dimensions for transportation, mm: |
2600mm |
3100mm |
4100mm |
4400mm |
4600mm |
Fan dimensions, m |
1.2 x 1.2 x 1.2 m |
1.2 x 1.2 x 1.2 m |
1.2 x 1.2 x 1.2 m |
1.2 x 1.2 x 1.2 m |
|
