Gas boiler neva lux baltgaz turbo 24. Operating modes BALTGAZ TURBO
Gas wall-mounted boiler BaltGaz NEVA Turbo- a device of a new generation. Thanks to the use of a special coating on the internal surfaces of the casing, the noise level of the boiler during operation is minimized.
BaltGaz NEVA Turbo are double-circuit wall-mounted gas boilers economy class with a separate heat exchanger and forced removal of combustion products. High efficiency for boilers of this class corresponds to the level of three stars according to the European classification. The new system of protection against the formation of condensate in the pressure switch and the pressure switch tubes increases the service life and comfort of operation. Easily removable front cover with two screws and folding side walls make maintenance as convenient as possible.
Advantages of the gas wall-mounted boiler BaltGaz NEVA Turbo
- Double-circuit gas boiler
- Copper heat exchanger of our own production for the heating circuit
- Steel plate heat exchanger for hot water circuit
- Only European reliable components
- AURORA control system from HoneyWell
- Electronic self-diagnostic system with display of error codes on the LCD display
- Application in systems with separate smoke extraction
- Possibility of connecting boilers in a cascade
Benefits of switching to HoneyWell's Aurora system:
- Modern inverted display;
- Lack of manual adjustment of the gas valve, the possibility of adjustment from the control panel;
- Adjustable display backlight;
- The possibility of introducing a system without a pressure switch, control by ionization current and temperature;
- The impossibility of "sticking" buttons, specially designed ergonomics;
- Special "demo" operating mode of the board for outlets;
- Two levels of boiler control parameters (40 parameters are available for fine tuning the boiler for a specific heating system);
- A proven solution from a global manufacturer.
Reliability:
- Electronic system of self-diagnostics with an output of codes of errors on ZhK the display.
- Stable operation at low pressures water, coolant, gas and voltage drops.
- Stainless steel pipes with 5 times longer service life than copper pipes.
- All manufactured boilers are tested on test benches, test engineers are personally responsible for each product.
Safety:
- Stopping the gas supply to the boiler when:
- extinction of the burner flame;
- overheating of the coolant;
- violation of smoke removal;
- interruption of power supply;
- coolant pressure drop below the maximum allowable values.
- discharge of the coolant at a pressure in the heating system above 0.3 MPa (3 bar).
- Built-in anti-freeze function.
- Built-in automatic pump blocking protection.
- The function of checking the freezing of the heat exchanger when starting the boiler.
- The use of a system of two heat exchangers - copper for the heating circuit and steel for the DHW circuit significantly reduces the formation of scale and the cost of service.
- The expansion tank is located inside the chamber with front access, the nipple for air pressure control in the tank is located on the top wall of the boiler for easy maintenance.
- Burner with rear manifold for easy maintenance (cleaning) of the burner.
- The front and side walls are glued with 10 mm thick insulation, which significantly reduces the noise level of the operating boiler and the temperature of the external panels of the boiler.
- The sealed chamber is integrated with the front cover and side walls, which lightens the weight of the boiler and simplifies maintenance.
- The electronic board is located in plastic panel with easily removable back cover for easy access to the board. The electronic board is protected against splashes and jets of water according to IPX5D
- To access the components of the hydraulic group, the control panel is easily folded down.
- A new system of protection against the formation of condensate in the pressure switch and pressure switch tubes has been introduced:
- at the place where the tubes are connected to the fan, a special baffle is installed that protects against exposure to cold air;
- a nipple with a 1 mm hole is installed on the tube near the pressure switch for sucking air from the chamber and removing it into the fan along with condensate;
- the pressure switch is located in the corner of the combustion chamber and is as far away from exposure to cold air as possible;
- the pressure switch is located horizontally in such a way that a slope is formed towards the fan to drain condensate;
- short tube length.
Gas heating boiler, wall-mounted, double-circuit with forced circulation of the coolant with closed camera combustion BaltGaz Turbo 24, manufactured in accordance with TU 4931-011-26985921-2012 (GOST R 51733-2001, GOST 20548-87, GOST R 54438-2011, TR TS 016/2011, TR TS 004/2011, TR TS 020 /2011).
The BALTGAZ TURBO boiler is designed for heating residential and non-hazardous industrial premises area up to 240 meters. Also, the boiler is designed for hot water supply (hereinafter referred to as HWC) for sanitary purposes.
Wall-mounted boiler control BALTGAZ TURBO 24
The main control element of the boiler is an electronic board that controls the entire operation of the apparatus. The microprocessor of the electronic board collects and processes signals from control and safety sensors. All information about the state of the device is displayed on the LCD display in real time. All boiler control is carried out from the control panel. If a remote control is connected to the boiler, then the control is carried out from it, the control panel buttons are not active.
In the center of the control panel of the BaltGaz Turbo boiler there is a liquid crystal display that displays, during normal operation of the boiler, the temperature in the currently active mode (when operating in heating mode - the temperature of the water in the heating system at the outlet of the boiler, when operating in HWC mode - the temperature of the B C at the outlet of the boiler). In the event of a malfunction, an error code is displayed instead of the temperature value.
Technical characteristics of the wall-mounted boiler BALTGAZ TURBO 24
Technical data for the boiler BaltGaz 24 Turbo
The symbols on the display indicate the operating mode of the boiler. Around the display are 7 boiler control buttons. The purpose of the control buttons and the symbols displayed on the display are presented in the tables below.
BALTGAZ TURBO operating modes
The boiler can operate in the following modes:
- Standby mode;
- summer mode;
- winter mode.
When the boiler is connected to the power supply, it automatically enters the operating mode in which it was at the time of disconnection from the network.
To put the boiler into operation, press the button.
Standby mode:
The symbol is shown on the display while waiting for user commands. The boiler does not work, but it is still possible to turn on the anti-freeze function.
Summer mode:
In the "summer" mode, the boiler works only on the DHW system. The boiler ignores the signals of the room thermostat and the temperature sensor of the heating circuit. When operating in this mode, the display shows a flashing symbol of the current mode and the current temperature. Temperature control range hot water from +30 C to +60 C.
Winter mode:
In the "winter" mode, the boiler works both for heating and for DHW. When operating in this mode, the display shows a flashing symbol of the current mode and the current temperature. The DHW request is prioritized for the heating request.
ATTENTION!
The ability to maintain the set temperature in the HWC mode is limited by the minimum heat output of the boiler. Therefore, at an elevated water temperature at the inlet to the HW C circuit (in summer time) and its low consumption, the temperature of the water at the outlet of the DHW circuit can significantly exceed the set one.
Additional features of BALTGAZ TURBO 24:
The boiler is endowed additional features, which can be used in certain operating modes. These features provide additional safety and ease of operation and maintenance of the boiler.
Anti-freeze function:
The anti-freeze function is the boiler's built-in anti-freeze protection system. When the water temperature in the heating system drops below +7 °C, the pump turns on and when it rises above +7 °C, it turns off. If the temperature drops below +4 °C, the burner ignites, the boiler starts to operate at minimum power until the temperature reaches +25 °C.
This mode is activated automatically if the following conditions are met:
- the boiler is connected to the mains and to the gas supply line;
- the boiler is not in a blocked state due to a malfunction;
- the pressure in the heating system corresponds to the set parameters.
Heat exchanger frost test function:
The heat exchanger freeze check function prevents emergency when the boiler is switched on, when the heating circuit is possibly frozen (for example, after a long power outage). When the water temperature in the heating system is less than or equal to +3 °C, the pump is switched on for 3 minutes. If after 3 minutes of operation the temperature reaches +4 °C, the boiler will return to normal operation. If after 3 minutes of operation the temperature does not reach + 4 °C, the operation of the wall-mounted unit will be blocked.
Anti-lock function:
The anti-blocking function of the pump prevents blocking of the pump shaft during long periods of inactivity. This function only works in standby mode. Once a day, the pump starts for 15 seconds. Boiler operation in heating mode with an external (outdoor) temperature sensor.
For optimum regulation of the water temperature in the heating circuit, depending on the outside temperature, it is recommended to use an external (outdoor) temperature sensor. The board automatically recognizes the presence of an external sensor, provided that parameter P-1 is set to “1”. The heating water temperature is corrected according to the outside temperature, the room temperature and the heat dissipation factor (ch), which is set in parameter P-2. The display shows the desired room temperature.
Graph of the dependence of the temperature in the heating circuit on the external temperature at room temperature 20 °C.
Overall and connecting dimensions of the boiler BaltGaz Turbo 24
Caring for a BaltGaz wall-mounted boiler
Regularly, especially before the start of the heating season, clean the water filters of the heating system and HWC.
- The DHW filter must also be cleaned when the water flow in the DHW line decreases;
- periodically remove air from the heating system;
- complement up to desired pressure water heating system;
The BaltGaz Turbo 24 boiler should be kept clean, for which it is necessary to regularly remove dust from the upper surface of the boiler, and also wipe the lining first with a damp and then with a dry cloth. In case of significant contamination, first wipe the lining with a wet cloth moistened with a neutral detergent, and then with a dry cloth.
It is forbidden to use detergents strong action and containing abrasive particles, gasoline or other organic solvents for cleaning the housing and plastic parts.
Connecting the BaltGaz Turbo boiler to the mains:
The boiler corresponds to the I class of protection against damage electric shock. It is necessary to make sure that there is a single-phase AC network with a rated voltage of 220 V, a frequency of 50 Hz with a grounding contact. The boiler should be grounded through the grounding wire of the power cord, ensuring all grounding requirements in accordance with GOST 27570.0-87. It is forbidden to use water and gas pipelines, as well as radiators for grounding.
Gas wall boilers Neva Lux (Neva Lux) Turbo 24 Turbo - double-circuit devices for heating and hot water, closed combustion chamber, electronic control, display, automatic operation, modern design, compact dimensions, wall mounting.
Gas wall-mounted boilers Neva Lux (Neva Lux) Turbo are designed for heating residential and industrial premises with an area of 140-240 sq.m (depending on power), and also provide full hot water supply up to 14 l / min. Boilers gas Neva Deluxe series Turbo are the latest generation of boilers from this manufacturer, equipped with a bithermic heat exchanger, European components, a closed combustion chamber, which allows you to install the boiler in ordinary rooms, for example, in the kitchen. Electronic push-button control and an information display allow you to quickly and conveniently adjust the operation of the boiler, an electronic diagnostic system helps to monitor its serviceability.
The boiler provides automatic maintenance of the set temperature with an accuracy of ± 1⁰С, is characterized by high efficiency (up to 93%), low noise level, easy maintenance. Additionally, the Neva Turbo gas boiler can be equipped with a wired control panel, a room thermostat, an outdoor temperature sensor and a GSM module for remote control of the boiler via communication means. The compact dimensions of the Neva Lux (Neva Lux) 24 Turbo boilers allow them to be placed in a limited space, and the built-in protection systems provide safety and peace of mind for users.
The warranty period is 2 years.
Country of manufacture 24 Turbo - Russia.
- heating and hot water
- closed combustion chamber
- precise temperature control
- built-in security system
- electronic control
- display and remote control (option)
- wall mounting
- compact dimensions
- easy installation
- affordable price
Got questions? Write, we will answer immediately!
Main characteristics
Power 24 kW
Production 14 l/min
Dimensions 700x420x270 mm
Execution vertical
Type of shell
Installation wall
Ignition type electronic
The combustion chamber closed
Weight 28.5 kg
contours 2
additional characteristics
Power 24.0 kW
Nutrition 220 V
Height 700 mm
Width 420 mm
Depth 270 mm
Weight 28.5 kg
Protection class IPX5D
Control electronic
Mounting type wall
Max. operating pressure10.0 bar
Guarantee period 2 years/years
Country of OriginRussia
Ignition type electronic
Heating area240 m2
The combustion chamber closed
Availability of the display Yes
Integrated pumpYes
Built-in boilerNo
Chimney diameter60/100 mm
Work on liquefied gasNo
| Wall-mounted gas double-circuit boiler BaltGaz Neva 24 Turbo with closed combustion chamber. | ||
| The country of origin is the Russian Federation. | ||
| Trademark Neva BaltGaz group of companies | ||
| Detailed information about BaltGaz. | ||
| Appearance | ||
| New modern cladding and control panel design. | ||
| Removable front cover with two screws for easy repair and maintenance. | ||
| Hinged side walls for ease of repair and maintenance. | ||
| Informative display with blue backlight. | ||
| The control panel buttons are made of silicone. | ||
| The manometer is located at the bottom of the boiler. | ||
| Comfort in use | ||
| Display of water temperature on the liquid crystal display. | ||
| Automatic maintenance of the set temperature with an accuracy of 1°С. | ||
| Options and accessories: | ||
| connection of a wired control panel; | ||
| connection of a room thermostat; | ||
| connection of the outdoor temperature sensor; | ||
| GSM module connection for remote control and remote monitoring of the operation of the boiler through SMS commands; | ||
| channel separator for the use of a boiler with a separate chimney; | ||
| Reliability | ||
| Electronic system of self-diagnostics with an output of codes of errors on ZhK the display. | ||
| Stable operation at low pressures of water (from 0.015 MPa), gas (from 0.6 kPa) and voltage drops (from 185 to 250 V). | ||
| Stainless steel pipes with 5 times longer service life than copper pipes. | ||
| Service life 12 years. | ||
| All manufactured boilers are tested on test benches, test engineers are personally responsible for each product. | ||
| Safety | ||
| Stopping the gas supply in the boiler when: | ||
| extinction of the burner flame; | ||
| heating of the coolant above 95°С; | ||
| violation of smoke removal; | ||
| interruption of power supply; | ||
| coolant pressure drops below the maximum allowable values; | ||
| Discharge of the coolant at a pressure in the heating system above 0.3 MPa (3 bar) | ||
| Built-in anti-freeze function | ||
| Built-in automatic pump blocking protection. | ||
| The function of checking the freezing of the coolant when starting the boiler | ||
| Design | ||
| Convenient access to expansion tank when servicing the boiler. The nipple for air pressure control in the tank is located on the upper wall of the boiler, access to the nipple is carried out without dismantling the boiler. | ||
| The front and side walls are glued with thermal insulation, which significantly reduces the noise level of the operating boiler and the temperature of the external panels of the boiler. | ||
| The electronic board is located in a plastic case with an easily removable rear cover for easy access to the board. The electronic board is protected against splashes and jets of water according to IPX5D. | ||
| To access the components of the hydraulic group, the control panel is easily folded down. | ||
| A new system of protection against the formation of condensate in the pressure switch and pressure switch tubes has been introduced: | ||
| a special deflector is installed at the connection point of the tubes to the fan, designed to protect the connection point of the pressure switch tubes from cold air; | ||
| a special sleeve with a hole for removing condensate from the tube with combustion products is installed in the tube at the pressure switch; | ||
| the pressure switch, due to its location, is maximally protected from exposure to cold air; | ||
| pressure switch tubes are located with a slope towards the fan to drain condensate; | ||
| the short length of the tubes reduces the amount of condensate formed; | ||
| Heat exchanger (Italy) | ||
| Bithermic six-pipe heat exchanger manufactured using the most advanced technology. | ||
| The width of the combustion chamber is 225 mm. | ||
| The heat exchanger is covered with a silicate-aluminum compound for additional protection against external influences. | ||
| Burner (Italy) | ||
| Atmospheric 11-section burner of the latest generation. | ||
| Low level of harmful emissions and low level noise. | ||
| Cleaning of a torch is made without dismantling of gas communications. | ||
| The material of the burner sections is high-quality aluminized steel. | ||
| Hydrogroup (Italy) | ||
| The hydraulic group is being tested in Italy and additionally as part of the product at the BaltGaz Group plant. | ||
| The hydraulic group is equipped check valve to protect against leakage of the coolant from the heating circuit when the make-up tap is not closed and the water pressure in the DHW circuit is low. | ||
| The hydrogroup includes: | ||
| circulation pump WILO (Italy); | ||
| automatic air vent; | ||
| safety valve 3 bar; | ||
| pressure sensor in the heating circuit at 0.6 bar; | ||
| automatic bypass valve; | ||
| DHW flow sensor; | ||
| DHW flow limiter at 10 l/min; | ||
| heating circuit make-up tap with check valve; | ||
| valve for draining the coolant from heating; | ||
| Electronic board (Italy) | ||
| Built-in ignition transformer on the board. | ||
| The wiring of the board and the boiler is divided into two parts: high and low voltage to improve the stability of the electronic board. | ||
| Reliable 10A fan and pump relays. | ||
| A spare fuse is included under the cover of the control box. | ||
| The connector for connecting the remote control and the room thermostat is placed outside the panel housing for easy connection. | ||
| Fan (Italy) | ||
| Reliable Italian manufacturer, market leader in Europe. | ||
| Cast aluminum body. | ||
| Gas supply regulator (Japan) | ||
| Reliable manufacturer, one of the leaders in the production of gas valves in the world. | ||
| The connection of the gas line at the inlet and outlet is 3/4 inch, which ensures stable boiler power when the gas pressure drops. | ||
| Very reliable gas valve: more than 90% of gas valve failures are due to improper adjustment (use of a magnetic screwdriver). | ||
| Expansion tank (Italy) | ||
| The volume of the tank is 6 liters, which allows you to connect the boiler to a heating system up to 70 liters without an additional expansion tank. | ||
Communications to which the boiler is connected
Boiler piping diagram
All accessories imported (Italy, Holland) are available.
This equipment allows to reduce gas consumption by 15-25%.
Our experts will advise you on all issues, help you choose the equipment. Contact.
Video presentation of the Baltgaz Turbo boiler
