"Bashregionkran" - Manufacture and sale of high-quality crane equipment. "Bashregionkran" - Production and sale of high-quality crane equipment Gantry crane mkks 32 14
Gantry crane KK-32 is a safe and reliable equipment designed for operation under increased loads in regions with a harsh climate. The high technical characteristics of the KK-32 gantry crane and its environmental friendliness correspond not only to domestic, but also to international quality standards, which is an indisputable advantage of this model of special equipment over similar installations.
Technical specifications
Specifications KK-32 are presented in the table.
| Parameter | Index |
| span | 32 m |
| load capacity | 32 t |
| Working mode | AZ/ZK group |
| Lifting height | 10 m |
| Speed: Boom/Trolley/Crane | 0.125/0.5/1 m/min. |
| Trolley gauge | 2.5 m |
| Console length | 2 m | 220 kN |
| Crane weight | 95 t |
| Type of current | Variable |
| Rail type | R 50 (according to GOST 7174-75) |
| Temperature regime | From - 40 o C to +40 o C |
A distinctive feature of the KK-32 gantry crane is the presence of anti-theft grips, which ensure the safety of operation of special equipment in regions with increased wind loads. If the pressure force of wind flows does not exceed 25×105Pa, then the unit is held in its original position by the brake system, which is located in the movement mechanism.
If the parameters of wind loads exceed the norm, the position of special equipment is regulated by means of anti-theft grippers, which are activated after a signal is transmitted from a sensor that responds to wind pressure and speed. The presence of special anti-theft equipment helps to prevent the occurrence of emergencies at the construction site.
Application of special equipment
Crane installation KK-32 is designed to perform high-rise installation and construction works. Design features crane installation allow you to perform tasks with maximum accuracy and accuracy.
The lifting mechanism of the crane is equipped with a “reduced speed to descend” function, the adjustment range of which is ¼. In addition, gantry cranes are widely used when performing unloading and loading operations in warehouses, docks and hangars.
The demand for special equipment is also due to the efficiency of the KK-32: the crane consumes a small amount of electrical energy.
Crane Special Goat KSK 32 meets not only all Russian, but also almost all international quality and safety standards. This means that the equipment is not only reliable, but also safe to use, and, moreover, very environmentally friendly. And, like any equipment designed to work in harsh Russian conditions, this gantry crane can withstand quite serious seasonal temperature fluctuations, working equally well in summer heat and winter cold.
Designed for installation on outdoors and performance of loading and unloading operations. The lifting mechanism has a reduced speed for descent with a regulation range of 1:4, which allows you to perform installation work with high precision. The design of the crane allows for its self-assembly.
Gantry cranes KSK-32 are used in construction, as well as during loading and unloading in hangars, docks and warehouses. They have high operational advantages and advantageous technical characteristics.
KSK-32 gantry cranes consume electrical energy economically, have a wider operating temperature range, and ensure smooth running.
| Characteristic | Meaning |
|---|---|
| Crane duty group according to ISO 4301/1 | A4 |
| Carrying capacity, t: | |
| - on the left console in the span, on the right console before departure 12 m | 32 |
| - on the right console from 12 to 16 m | 20 |
| Crane rail type according to GOST 7174 | P50 |
| Lifting speed, m/s (m/min) | 0,109-0,133(6,5-8) |
| Travel speed, m/s (m/min): | |
| - crane | 0,61(37) |
| - carts | 0,55(33) |
| Total rated power of electric motors installed on the crane, kW, not more than | 83 |
| Type of current | variable |
| frequency Hz | 50 |
| Voltage, V | 380/220 |
Appearance and overall dimensions of the KSK-32 gantry crane
| No. p / p | Span, Lk, m | Lifting height, m | Dimensions in mm | Weight, t, no more | ||||
|---|---|---|---|---|---|---|---|---|
| L1 | L2 | L3 | B | H1 | ||||
| 1 | 42 | 18/14 | 16000 | 18520 | 12000 | 12000 | 26910 | 94/91 |
| 2 | 3500 | 5710 | - | 12000 | 26910 | 88/84 | ||
| 3 | 32 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 89/86 |
| 4 | 3500 | 5710 | - | 10440 | 26910 | 83/79 | ||
| 5 | 26 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 86/83 |
| 6 | 3500 | 5710 | - | 10440 | 26910 | 80/76 | ||
| 7 | 36 | 18/14 | 16000 | 18520 | 12000 | 10440 | 26910 | 91/88 |
| 8 | 3500 | 5710 | - | 10440 | 26910 | 85/81 | ||
The company "Bashregionkran" specializes in the production and repair of crane equipment. Our company has been working in this field for more than 10 years, and is ready to offer its customers the manufacture of overhead, gantry and jib cranes.
Having our own production site located in the industrial area of Ufa, we sell products and provide additional services. We carry out qualified repair of cranes and provide professional technical support, which includes diagnostics and routine inspection.
If necessary, our specialists are ready to transport large-sized crane equipment across Russia, and perform work on its installation, dismantling or maintenance.
Production
We specialize in the manufacture of:
- Bridge overhead single and double span cranes.
- Overhead single girder cranes.
- Overhead double girder cranes.
- Gantry cranes.
- Console cranes.
- Traverses.
We offer a wide range of services in the field of maintenance of crane equipment:
- Installation and dismantling of crane equipment.
- Repair of cranes, as well as their examination and technical diagnostics using modern technology.
- Installation and repair of crane tracks.
- Installation and maintenance of various security devices.
Crane repair
For organizations that own lifting mechanisms, we offer technical support (preventive inspection, diagnostics) and qualified repairs of both equipment in general and its individual components and assemblies, including:
- repair of overhead cranes;
- repair of gantry cranes;
- repair of crane beams;
- repair of metal structures of GPM;
- repair of reducers, carts, winches;
- replacement of cable and rope products;
- replacement and repair of electric motors;
- production of overhead, gantry, console cranes;
- locksmith and turning works;
- repair of hoists with a carrying capacity from 0.5 tons to 16 tons;
- installation, repair, leveling, construction and replacement of crane runways for gantry and overhead cranes;
- dismantling, installation of cranes with commissioning.
- transfer of cranes from the cabin to the floor (with or without cabin dismantling)
Geography of coverage
Today we offer services for the sale and production of gantry, overhead and jib cranes not only in Russia, but also in neighboring countries.
Our equipment is successfully sold in the following regions:
- Russia. Republic of Bashkortostan (city of Ufa, Sterlitamak, Neftekamsk, Salavat), Republic of Tatarstan (city of Kazan, Almetyevsk, Naberezhnye Chelny, Zainsk, Yelabuga), Orenburg region (city of Orenburg and Buzuluk), Sverdlovsk region (city of Yekaterinburg, Nizhny Tagil, Serov, Kamensk-Uralsky), in the Perm region (the city of Perm, Solikamsk, Berezniki), the Chelyabinsk region (the city of Magnitogorsk and Chelyabinsk), the Tyumen region (the city of Tyumen, Surgut, Nizhnevartovsk). In addition, our equipment is purchased by enterprises operating in Moscow, Izhevsk, Nizhny Novgorod, Irkutsk, Omsk, Tomsk, Kurgansk and Krasnoyarsk.
- Kazakhstan. Almaty, Astana, Shymkent, Karaganda, Aktoba, Uralsk, Kostanay, Petropavlovsk, Zhanaozen.
- Etc.
