Proterm 150 kW specifications. Design features Protherm KLO
Description
Protherm Grizzly 150 KLO is a floor standing gas boiler designed for heating and cooking hot water in residential premises. This configuration is intended for systems with closed coolant circulation. The Grizzly series includes high power boilers in the range from 65 to 150 kW, which the best way cope with the heating of residential premises of a large area and supply hot water in large volumes (requires an external boiler). These models have also proven themselves in the commercial field, being installed in industrial premises or warehouses.
Features of the boiler Protherm Grizzly 150 KLO
This model is easy to install and use. The design is distinguished by thoughtfulness and exceptional reliability: a cast-iron two-way heat exchanger, an atmospheric stainless steel burner, readiness for complex hydraulic conditions guarantee the long-term operation of the Protherm Grizzly 150 KLO boiler. In addition, the unit is equipped with an original system for uniform distribution of the heat carrier in the heat exchanger (RVTV), which provides high efficiency work.
As in many other Protherm floor standing gas boilers, all work processes of the Protherm Grizzly 150 KLO boiler are controlled by means of special indicators that display the temperatures and pressures of the coolant. The automatic diagnostic system controls the main processes, providing information about possible problems in the system or the need for preventive maintenance.
Also Protherm Grizzly 150 KLO is different high level safety: the boiler has overheating protection systems, protection of the cast-iron heat exchanger from condensate, the cooling circuit prevents the temperature of the coolant in the boiler from rising above 110C.
Technical description Protherm Grizzly 150 KLO
- Efficiency 91%;
- from 8 to 17 heat exchanger sections;
- electric ignition, control of all work processes using a microprocessor;
- two-stage regulation of boiler power;
- control of the presence of flame and draft in the chimney;
- control modes "WINTER-SUMMER".
To know Additional information about this model, as well as you can buy a floor-standing gas boiler Protherm Grizzly 150 KLO with the possibility of delivery to any region on our website or from sales staff. If necessary, our specialists are ready to perform a full list of works on
Single-circuit cast-iron gas floor boiler Protherm Grizzly 150 KLO with an open combustion chamber, 150 kW for heating and hot water preparation in an external boiler. Designed for installation in residential buildings, country houses and industrial premises.
Electric ignition and 2-stage power regulation of the Protherm Grizzly 150 KLO boiler for various modes of operation. Possibility to install a fan forced deletion flue gases.
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler. When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Grizzly boilers are the result of cooperation with several development centers and fulfill all market requirements. Countless options and capacity potential provides a wide range of applications. GRIZZLY opens new way to an easy solution for a boiler room at a reasonable price, while observing the demanding conditions of environmental protection.
The control panel is designed so that its control and management elements are clear and useful. Therefore, it is divided into a consumer part and a service part.
The boiler is equipped with a chimney draft control system. Control is provided by a combustion products thermostat, which is located in the draft interrupter. In the event of a decrease and complete cessation of the chimney draft, the gas path of the boiler will be closed and the boiler will stop working.
The burner is made up of several tubes, the number of which depends on the power of the boiler. Perfect ignition, solved with the help of a preignition burner, ensures a trouble-free start.
The cast iron heat exchanger is still the latest representative of the development trend. Thanks to new design maximum combustion efficiency is reached. In addition, the cast iron heat exchanger stands out for its long lifespan, unlike boilers equipped with a steel heat exchanger.
Each of a number of boilers "GRIZZLY" in the basic equipment has a power switch. This switch allows two-stage regulation, which helps to select the optimal boiler output. in case the power of one boiler does not meet the requirements for the total volume of the heated object, you can connect large quantity boilers in a cascade and equip them with a control unit capable of working with regulators built into the following boilers.
Technical Protherm features Grizzly 150 KLO:
Designed for systems with closed coolant circulation
Cast iron double pass heat exchanger
System for uniform distribution of heat carrier in the heat exchanger (RVTV)
Open combustion chamber
Possibility of preparing hot water in an additional storage boiler
Efficiency 91%
Atmospheric stainless steel burner
2-stage boiler power control
Electric ignition
Boiler control with built-in microprocessor
Possibility to connect up to 16 boilers in cascade (with Kromschroeder cascade regulators)
Control mode "WINTER-SUMMER"
Indication of coolant pressure in the heating system
Heat carrier temperature indication
Ability to work with weather-dependent automation
Protection of the cast iron heat exchanger against condensate
Chimney draft control
overheat protection
Flame control
Cooling circuit (prevents the temperature of the coolant in the boiler from rising above 110 C)
Resistant to difficult hydraulic conditions
Delivery of the boiler already assembled
Possibility to replace middle cast iron sections
Ease of installation, care and maintenance
Possibility of work on the main and liquefied gas
Floor standing cast iron gas boiler with a capacity of 150 kW for heating and hot water preparation in an external boiler.
Designed for installation in residential buildings, country houses and industrial premises.
Electric ignition. Two-stage power regulation of the boiler for various modes of operation.
Display of the temperature and pressure of the heat carrier from the heating system, which allows you to continuously receive information at any time during the operation of the boiler.
When connecting room regulators, the boiler control system allows you to maintain a comfortable microclimate in the premises.
Gas floor boiler heating Protherm Grizzly is a universal solution for comfortable heating of private houses, offices, warehouses, etc.
Key Features:
A gas boiler
Designed for systems with forced circulation of the coolant
Cast iron heat exchanger
System for uniform distribution of heat carrier in the heat exchanger (RVTV)
Open combustion chamber
Possibility of preparing hot water in an additional storage boiler
Power 150.0 kW
Efficiency 91%
Atmospheric stainless steel burner
2-stage boiler power control
Electric ignition
Boiler control with built-in microprocessor
Possibility of connection in cascade (with cascade controller E8.4401)
Indication of coolant pressure in the heating system
Heat carrier temperature indication
Protection of the cast iron heat exchanger against condensate
Chimney draft control
overheat protection
Flame detection
Resistant to complex hydraulic conditions
Delivery of the boiler already assembled
Possibility to replace middle cast iron sections
Ease of installation, care and maintenance
Warranty 2 years
Contact our experts and get advice on how to choose and buy a Protherm gas boiler, as well as order delivery and installation at the best price.
Our manager will orient you on the characteristics of the boilers, clarify prices and availability.
You can get a price discount if you buy from us gas boilers Protherm wholesale or order installation and maintenance services for the boiler room.
Ecolife specialists are ready to install the boiler according to best price. The approximate cost of installing the boiler can be viewed in the Heating installation section, as well as clarified by phone.
Ecolife Group professionally performs the installation of heating systems, taking into account the requirements of manufacturers of equipment and components, current regulatory documents and safety precautions. By ordering a turnkey heating installation from us, you can be sure of an excellent result!
OUR SERVICES
The PROTHERM manufacturer gives a 2-year warranty on its equipment, unless otherwise stated.
The manufacturer's warranty is valid only if the installation and commissioning were carried out by a certified employee of a specialized organization in accordance with the regulations in force in the territory. Russian Federation legislative and regulatory acts.
The specific conditions of the warranty and the duration of the warranty period are established and documented at the time of sale and commissioning of the machine. Pay attention to the need to fill in the "Sales Information" section, which contains the serial number of the device, sales marks and corresponding seals, sales dates and seller's signatures in the warranty cards located on the back of the product passport.
The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of the rules of transportation and storage, the use of non-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and / or commissioning, non-compliance with the instructions for installation and operation of the equipment and accessories to it and other reasons beyond the control of the manufacturer, as well as work on the installation and maintenance of the device.
The established service life is calculated from the moment of commissioning and is specified in the documentation attached to a specific product.
The Protherm factory guarantees the availability of any spare parts for this product for a minimum of 8 years after it has been discontinued.
For Protherm equipment and accessories, the manufacturer sets a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end user.
Spare parts are warranted for 6 months from retail date when spare parts are installed by a Protherm certified technician.
In case of partial or complete absence of information about the sale and / or commissioning, documented, the warranty period is calculated from the date of manufacture of the device. The serial number of the product contains information about the date of manufacture: numbers 3 and 4 - the year of manufacture, numbers 5 and 6 - the week of the year of manufacture.
- Delivery in Moscow 500 rubles
- Delivery within MO: 500 rubles + 50 rubles/km from Moscow Ring Road
- Delivery in Russia - transport companies
- Pickup: free
You can always specify a convenient delivery date for you (but not less than two working days) when agreeing on an order. Delivery of goods is carried out from Monday to Friday from 12:00 to 18:00
Delivery at a later or earlier time interval is agreed individually with the Buyer and is carried out for an additional fee.
Delivery on Saturday, Sunday and public holidays (as agreed)
Delivery on weekends and holidays is carried out at the request of the buyer, upon confirmation of the application for 2 working days.
Delivery on weekends and holidays is carried out at the request of the buyer for an additional fee, upon confirmation of the application for 2 working days.
Pickup
You can pick up the order yourself at the pickup point at Podymnaya St., 14 building 37.
Self-delivery of goods is carried out daily except Saturday, Sunday and public holidays after confirmation by the sales officer.
Delivery terms
Delivery of orders placed through the Ecolife online store is carried out to the entrance or to the place where a truck can easily drive up and where you can unhinder the unloading of goods, as well as to the points of acceptance of cargo by transport companies transporting to the regions.
The driver of the delivery service can provide the services of a loader only by prior arrangement for an additional fee.
Upon delivery to the Buyer, the seller is responsible for appearance goods until the moment of its acceptance and transfer to the Buyer. Claims for the appearance and configuration of the delivered goods, in accordance with Art. 458 and 459 of the Civil Code of the Russian Federation, it is possible to present only before the transfer of the goods by the Seller to the Buyer. From the moment of acceptance and transfer of the goods, the seller's obligation to transfer the goods is considered fulfilled. The fact of acceptance of the goods by the Buyer is confirmed by the signature in the "Purchase and Sale Agreement" in the column "Acceptance and Transfer Certificate". If the appearance or packaging of the goods do not correspond to the proper quality, the buyer has the right not to accept the goods and not to sign the documents.
Payment
Currently, the Ecolife online store offers the following payment methods for orders:
- Cash on delivery
Upon delivery of the order, as well as upon self-receipt of the goods at the pickup point, you can pay for the order in cash at the time of its receipt. - Payment by bank transfer
Payment by details to the company's account upon completion of the receipt in the bank or through the Internet bank. After placing an order, you will receive an invoice for payment and a receipt with our details. The prices indicated on the invoice are final and include VAT. The issued invoice is valid for 5 calendar days. This payment method can be used through any bank operating in Russia.
Note:
Banks charge transfer fees Money. Check with the bank where you plan to pay the receipt for information on the amount of the commission fee. When choosing this method payment, please wait for the invoice.
Please note that the manufacturer's warranty is valid only if the installation and commissioning were carried out by an employee of a specialized organization certified by the Protherm factory. At the same time, the presence of a Protherm certificate does not exclude the need for additional certification of the personnel of a specialized organization in accordance with the laws and regulations in force on the territory of the Russian Federation relating to the scope of activity of this organization.
The fulfillment of the warranty obligations stipulated by the current legislation in the region where the Protherm equipment was installed is carried out by the seller of your device or an organization associated with it, authorized by a special agreement to perform warranty and non-warranty repairs of Protherm products. Repairs may also be carried out by an authorized Protherm service center.
The company that performs warranty or non-warranty repairs of Protherm equipment during the warranty period will eliminate free of charge all the defects identified by it that have arisen through the fault of the manufacturer. The specific conditions of the warranty and the duration of the warranty period are established and documented at the time of sale and commissioning of the machine. Pay attention to the need to fill in the "Sales Information" section, which contains the serial number of the device, sales marks and corresponding seals, sales dates and seller's signatures in the warranty cards located on the back of the product passport.
The manufacturer's warranty does not apply to products whose malfunctions are caused by transport damage, violation of the rules of transportation and storage, the use of non-freezing coolants, contamination of any kind, including hardness salts, water freezing, unqualified installation and / or commissioning, non-compliance with the instructions for installation and operation of the equipment and accessories to it and other reasons beyond the control of the manufacturer, as well as work on the installation and maintenance of the device.
The established service life is calculated from the moment of commissioning and is specified in the documentation attached to a specific product.
The Protherm factory guarantees the availability of any spare parts for this product for a minimum of 8 years after it has been discontinued.
For Protherm equipment and accessories, the manufacturer sets a warranty period of 2 years from the date of commissioning, but not more than 2.5 years from the date of sale to the end user.
Spare parts are warranted for 6 months from retail date when spare parts are installed by a Protherm certified technician.
In case of partial or complete absence of information about the sale and / or commissioning, documented, the warranty period is calculated from the date of manufacture of the device. The serial number of the product contains information about the date of issue: numbers 3 and 4 - the year of manufacture, numbers 5 and 6 - the week of the year of manufacture.
An organization that is an authorized Protherm service center has the right to refuse the end user warranty repair of equipment commissioned by a third party if the authorized service center specialist finds the above reasons that exclude the manufacturer's warranty.
