The line is extension infusion. Connecting line Extender for infusion therapy
Extension tubes low pressure TRO-EXTENSOR Lp and high pressure TRO-EXTENSOR Hp, (length 150-300 cm)- used to connect the source of infusion (infusion set, infusion pump, perfusion pump) with an IV catheter (peripheral or central)
Description, properties:
Flexible, transparent extension tubes allow for infusion therapy, control the quality and condition of the injected solution, give the necessary shape to the infusion line, provide remote access to the catheter, facilitate all necessary manipulations at a distance from the vessel catheterization site, reduce the risk of infection and mechanical irritation of the vessel. They have Luer-Lock connections (male, female) adapted to injection needles, peripheral and central venous catheters. This type of connection provides a tight, safe and reliable connection of the elements of the infusion line, which prevents the risk of leakage of the infusion solution and its external contamination.
The product is sterile, non-pyrogenic, non-toxic.
There are two types of extension tubes available:
- low pressure (Lp), which are used for infusions to the patient due to the action of gravitational pressure, i.e. at low pressure up to 4 bar/60psi (inner diameter 3.0 mm, outer diameter 4.1 mm.)
- high pressure (Hp), which are used for infusions to the patient using infusion pumps and pumps, i.e. at higher pressures up to 55 bar/800 psi (inner diameter 1.5 mm, outer diameter 4.1 mm.)
Tube length: 10, 25, 50, 100, 150, 200 cm.line 5
Specifications:
Medical products of Troge Medical GmbH comply with international valid standards such as EP, BP, USP, as well as DIN EN and ISO.
Quality: CE
Material: PVC
Sterilization: ethylene oxide
best before date: 5 years
Package: individual, sterile
quantity per pack/box: 40/400
Manufacturer:
Troge Medical GmbH, Germany
Line to syringe dispenser price
RUB 18.00(d- 150 cm, low pressure (Lp)
RUB 23.00(d- 150 cm, high pressure (Hp)
Extensions (lines) for syringe dispensers - are intended for connection of devices for carrying out infusion therapy with the device of vascular access of the patient.
Available in two versions:
For use with special syringes for infusion pumps with a Luer-Lock connector. Consists of an extension tube, FLL connector and MLL connector.
For use with standard luer lock syringes. It consists of a connecting tube, a Luer connector and a tip with a plug.
Producer: "Viroban", Russia
Specifications:
Name | Ø internal diameter of the tube, (mm) | line length, (cm) | line filling volume (ml) | quantity in transport box (pcs) | Price with VAT (rub.) |
Extension for infusion therapy LuerLock / Luer-Slip 90 | 1,3 | 90 | 1,4 | 50 | RUB 21.50 |
LuerLock 150 Infusion Therapy Extender | 1,3 | 150 | 2,4 | 50 | |
LuerLock 250 Infusion Therapy Extender | 1,3 | 250 | 4,0 | 40 |
Line to syringe dispenser Luer-lock d-150 cm
Extension tubes for low pressure TRO-EXTENSOR Lp and high pressure TRO-EXTENSOR Hp, (length 150 - 300 cm)- used to connect the source of infusion (infusion set, infusion pump, perfusion pump) with an IV catheter (peripheral or central)
Description, properties:
Flexible, transparent extension tubes allow for infusion therapy, control the quality and condition of the injected solution, give the necessary shape to the infusion line, provide remote access to the catheter, facilitate all necessary manipulations at a distance from the vessel catheterization site, reduce the risk of infection and mechanical irritation of the vessel. They have Luer-Lock connections (male, female) adapted to injection needles, peripheral and central venous catheters. This type of connection provides a tight, safe and reliable connection of the elements of the infusion line, which prevents the risk of leakage of the infusion solution and its external contamination.
The product is sterile, non-pyrogenic, non-toxic.
There are two types of extension tubes available:
- low pressure (Lp), which are used for infusions to the patient due to the action of gravitational pressure, i.e. at low pressure up to 4 bar/60psi (inner diameter 3.0 mm, outer diameter 4.1 mm.)
-high pressure (Hp), which are used for infusions to the patient using infusion pumps and pumps, i.e. at higher pressures up to 55 bar/800 psi (inner diameter 1.5 mm, outer diameter 4.1 mm.)
Standard tube length: 150 cm.
Tube length: 10, 25, 50, 75, 100, 200, 250, 300, 600 cm - ordered and produced under ORDER!(opaque and transparent)
Type | Line Inner Diameter (mm) | Trunk length (mm) |
Pressure resistance ( bar) | Qty per box (pcs) | Price with VAT (rub.) / pcs. |
Low pressure (Lp) | 3,0 | 1500 | up to 4.0 bar / 60 psi | 40/400 | Not imported |
High pressure (Hp) | 1,5 | 1500 | up to 55.0 bar / 800 psi | 25.00 (remainders) |
Specifications:
Medical products Troge Medical GmbH comply with international valid standards such as EP, BP, USP, as well as DIN EN and ISO.
Quality: CE
Material: PVC
Sterilization: ethylene oxide
Best before date: 5 years
Package: individual, sterile
quantity per pack/box: 40/400
Manufacturer:
Troge Medical GmbH, Germany
Medical extender - infusion line MIM, Russia
Medical extender (infusion line) designed to connect the source of infusion (infusion set, syringe pump syringe) with an intravenous catheter.
Flexible, transparent tubing Extension line to syringe dispenser allow for infusion therapy, control the quality and condition of the injected solution, give the necessary shape and direction to the extension cord, provide remote access to the patient with a catheter, facilitate all necessary manipulations at a distance from the vessel catheterization site, reduce the risk of infection and mechanical irritation of the vessel.
Extension cords have "Luer-lock" tips (male and female) which are adapted to injection needles, venous catheters, Luer-lock syringes. This type of connection provides a tight, safe and reliable connection of the elements of the medical extension (infusion line), which prevents the risk of leakage of the medicinal product and its external contamination.
used for intravenous infusion of photosensitive medicines.
Specifications:
The extension can withstand pressure up to 4 bar.
Working length of the medical extension, mm: 1 500; 2500; 3500; 4500.
Inner diameter of the medical extension tube, mm: 1.5±0.1; 3.0±0.1.
The tube of the medical extension is made of high quality polyvinyl chloride approved for the manufacture of medical devices.
Extension type (infusion line) |
Inner diameter Ø extension (mm) |
Length extension cord (mm) |
resistance to pressure ( bar) |
Price with VAT (rub.) / piece |
ID-1.5mm | 1.5±0.1 | 1500 | up to 4 bar | 17,50 |
2500 | 31,05 | |||
3500 | 33,35 | |||
4500 | 38,00 | |||
ID-3.0mm | 3.0±0.1 | 1500 | up to 4 bar | 21,00 |
2500 | ||||
3500 | ||||
ID-1.5mm (lightproof) |
1.5±0.1 | 1500 | up to 4 bar | 23,00 |
ID-3.0mm (lightproof) |
3.0±0.1 | 1500 | up to 4 bar | 29,00 |
Package:
a sealed blister made of thermoformed film and gas-permeable paper or a special sleeve made of the same materials.
Extensions are sterile, non-pyrogenic, non-toxic
Sterilization gas: EO, ethylene oxide.
Best before date: 5 years from date of sterilization
Producer LLC "MIM", Russia
Infusion line - extension for a syringe pump (manufacturer: "Frebor", Belarus)
single use type PI 1.0 x 1.5 and 1.5 x 1.5(tube inner diameter in mm. X wire length in meters) are intended for long-term intravenous administration of liquid medicines using a syringe dispenser (pump).
Conductor infusion with a transparent tube designed to control air bubbles in the patient's venous bed. The small internal diameter of the tube ensures a minimum residual amount of injected drugs.
Infusion guide with opaque tube It is intended for the introduction of drugs that are destroyed by light. Conductors with light-tight tube for disposable use. The small internal diameter of the tube ensures the minimum residual amount of expensive drugs administered.
Conductor infusion connecting connector with a cone type "Luer-Lock" is suitable for injection needles, peripheral and central venous catheters, perfusors, the cones of the conductor are protected by protective caps, which ensure the sterility and non-pyrogenicity of the internal environment of the conductor.
The movable guide nut allows you to securely fasten the injection needle, catheter and other devices for injecting drugs.
Specifications:
Standard tube length: 1500 mm.
Working length can be (mm): 750, 1500, 2000, 2500, 3000, 6000
Tube Inner Diameter (mm): 1.0, 1.5 and 3.0
Transparent and opaque tube(for drugs that are destroyed by light);
Sterilization: Gas - Ethylene oxide (EO)
Package: Sealed bag made of thermoformed film and gas-permeable paper.
Best before date: 5 years from date of manufacture.
Manufacturer: JV "FreBor" (FREBOR), Belarus
Trunk type |
Line length (mm) |
Int. |
Line fill volume ( ml) | Pressure resistance ( bar) | Price with VAT (rub.) / pcs. | Qty per factory. pack. (PC) |
PI 1.0 x 1.5 |
1500±25 |
1,0 |
1.2 ± 0.2 |
16,50 |
320 | |
PI 1.0 x 1.5 (lightproof) | 18,00 | 250 | ||||
PI 1.0 x 2.0 |
2000±25 |
1,0 |
1.6 ± 0.2 |
|||
PI 1.0 x 2.5 |
2500±25 |
1,0 |
2.0 ± 0.2 |
|||
PI 1.5 x1.5 |
1500±25 |
1,5 |
2.6 ± 0.2 |
17,40 |
320 | |
PI 1.5 x1.5 (light-protective) | 20,00 | 250 | ||||
PI 1.5 x2.0 |
2000±25 |
1,5 |
3.5±0.2 |
|||
PI 1.5 x2.5 |
2500±25 |
1,5 |
4.4 ± 0.2 |
|||
PI 3.0 x0.75 |
750±25 |
3,0 |
5.3 ± 0.2 |
|||
PI 3.0 x1.5 |
1500±25 |
3,0 |
10.6 ± 0.2 |
21,50 |
300 | |
PI 3.0 x3.0 |
3000±25 |
3,0 |
21.2 ± 0.2 |
26,00 |
120 |
Extension line for syringe dispenser, Apexmed
Extension infusion line Apexmed- designed for intravenous infusion of drugs using a syringe dispenser in medical institutions. If necessary, it can be used to lengthen more complex infusion lines (for example, in hemodialysis). The light-tight infusion line is used for intravenous infusion of light-sensitive drugs.
The Luer-Lock connector is equipped with a union nut that allows you to fix it on the catheter or needle.
Extension line characteristics:
It has a luer lock on one end and a luer lock on the other.
- transparent material allows visual control.
- the connector is equipped with a union nut that allows you to fix it on the catheter or needle.
- made of implantation-non-toxic polyvinyl chloride.
- tube length 150 cm.
- inner diameter 3.0 and 1.5 ± 0.1 mm.
- protection of photosensitive preparations from UV rays with a wavelength of 290 - 450 nm (light protection line)
- quantity per pack/box - quantity per pack/box - 1.6 mm = 100/800 pcs, 3 mm = 60/480 pcs.
Types of extension lines:
Extended infusion line Apexmed |
Int. tube diameter (mm) | Ext. tube diameter (mm) | Length (mm) |
Estimated fluid pressure | Pack quantity / box (pcs) |
ID-1.5mm | 1.5±0.1 | 2,7 | 1500 | up to 4.5 bar | 100 / 800 |
ID-3.0mm | 3.0±0.1 | 4,1 | 1500 | up to 4.5 bar | 60 / 480 |
ID-1.5mm (lightproof) |
1.5±0.1 | 2,7 | 1500 | up to 4.5 bar | 100 / 800 |
ID-3.0mm (lightproof) |
3.0±0.1 | 4,1 | 1500 | up to 4.5 bar | 60 / 480 |
Manufacturer:
The Onlymed company is your guide to the world of quality medical products from top brands Europe, which have established themselves as the undisputed leaders in the production of high-quality products. These include products intended for infusion therapy, namely an extension infusion line. It is used for the introduction into the circulatory system of the patient drugs, strictly dosed and on a long-term basis.
Extension line: properties and applications
There are a number of standard requirements that such a product must meet. Among the main characteristics are the following:
- transparent polyvinyl chloride as a raw material for manufacturing, which allows you to constantly monitor the process of drug administration;
- disposable packaging with sterilized contents;
- non-toxic hypoallergenic materials;
- UV protection for preparations with high photosensitivity (dark amber color).
Extension infusion line
When using perfusion equipment for intravascular injection, it is necessary to provide a sufficient length of the line. For this, it is used extension infusion line. It allows you to ensure the normal operation of the syringe pump during the administration of drugs.
In the online store of medical equipment ARXIMED you can purchase extension lines different type at a favorable cost. We work directly with manufacturers of such tools, so we set favorable prices for our customers.
Features of the infusion extension line and product acquisition
We offer our clients all types of such instruments necessary for intravenous injections. Available in 150 and 200 cm lengths, orange and black. All models have an inner diameter of 1.5 mm and an outer diameter of 2.6 mm.
In addition, they have a number of features that provide convenient operation:
- Mechanical strength and elasticity. The line is not subject to breaks and kinks. Polyvinyl chloride deforms, but does not break under transverse impact or stretching.
- Versatility. The extension line can be used with any standard perfusion system. Standard luer-lock connectors allow this instrument to be connected to most known syringes, catheters and other infusion devices.
- Easy to fill and sealed. Due to the small internal volume, the line quickly draws liquid, displacing air upwards. At the same time, the tightness of the system is ensured by the infusion plug, which is supplied in the kit.
- Long shelf life. The line retains its operational characteristics for five years from the date of production.
Products are packed in sealed bags of one hundred pieces in one. Each one is labeled with the following information:
- date of manufacture of products;
- the number of lines in the container;
- manufacturing plant;
- specifications.
We can also supply you with bulk containers, each of which will contain 10 such packages. That is, in one box there are a thousand extension lines.
To order the required quantity of such products, simply select it from the catalog and add it to the "Cart" section. After this window contains the required number of extension lines and other tools that you need, place an order.
We are waiting for your applications!
Connecting line Dispomed. manufacturer Dispomed Witt oHG (Germany)
vendor code | Name | Number of pieces in a pack. / transport box | |
50152 | connecting line 150 cm | connecting line for infusion 150 cm, PVC, 1.5 x 2.6 mm, light-tight, orange, 5 bar, sterile. | 100/1000 |
50151 | connecting line 150 cm | connecting line for infusion 150 cm, PVC, 1.5 x 2.6 mm, light-tight, black, 5 bar, sterile. | 100/1000 |
50201 | connecting line 200 cm | connecting line for infusion 200 cm, PVC, 1.5 x 2.6 mm, opaque, black, 5 bar, sterile. | 100/1000 |
Connecting line "Acti-fine", M.Schilling GmbH Medical Products (Germany)
vendor code | Name | additional characteristics | No. of pieces per pack/transport box |
S700NC030 | connecting line "Acti-fine" 30 cm | connecting line for syringe pump, 30cm, DEPH-free, 1.5*2.65mm, 4 bar, sterile. | 200 |
S700NC075 | connecting line for syringe pump, 75cm, DEPH-free, 1.5*2.65mm, 4 bar, sterile. | 200 | |
S700NC150 | connecting line for syringe pump, 150cm, DEPH-free, 1.5*2.65mm, 4 bar, sterile. | 200 | |
S700NC200 | connecting line for syringe pump, 200cm, DEPH-free, 1.5*2.65mm, 4 bar, sterile. | 200 | |
S701PC015 | connecting line "Acti-fine" 15 cm | connecting line, 15cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterilized. | 200 |
S701PC030 | connecting line "Acti-fine" 30 cm. | connecting line, 30cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterilized. | 200 |
S701PC075 | connecting line "Acti-fine" 75 cm | connecting line, 75 cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterile. | 200 |
S701PC150 | connecting line "Acti-fine" 150 cm | connecting line, 150 cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterile. | 200 |
S701PC200 | connecting line "Acti-fine" 200 cm | connecting line, 200 cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterile. | 200 |
S701PC350 | connecting line "Acti-fine" 350 cm | connecting line, 350 cm, HD, 3.0*4.1mm, 4 bar, (gravity feed), sterile. | 50 |
S702NC090 | connecting line "Acti-fine" 90 cm | connect. line, syringe pump, 90cm, DEPH-free, 1.2*2.7mm, 4 bar, sterile. | 200 |
S702NC150 | connecting line "Acti-fine" 150 cm | connect. line, syringe pump 150cm, DEPH-free, 1.2*2.7mm, 4 bar, sterile. | 200 |
S702NC200 | connecting line "Acti-fine" 200 cm | connect. line, syringe pump, 200cm, DEPH-free, 1.2*2.7mm, 4 bar, sterile. | 200 |
S702NC300 | connecting line "Acti-fine" 300 cm | connect. line, syringe pump, 300cm, DEPH-free, 1.2*2.7mm, 4 bar, sterile. | 200 |
S703CO150 | connecting line "Acti-fine" 150 cm | connecting line for infusion, 150 cm, light-protective, 1.0*2.7 mm, 4 bar, sterile | 200 |
S703CO200 | connecting line "Acti-fine" 200 cm | connecting line for infusion, 200 cm, light-protective, 1.0*2.7 mm, 4 bar, sterile | 200 |
S704CP150 | connecting line "Acti-fine" 150 cm | connecting line for infusion, 150 cm, (PE 1.0*2.0mm, transparent), 4 bar, sterile. | 200 |
S704OP150 | connecting line "Acti-fine" 150 cm | connecting line for infusion, 150 cm, (PE 1.0*2.0mm, yellow), 4 bar, sterile. | 200 |
Payment is made only by bank transfer, transfer Money to the supplier's account.
Cashless rules!
Courier delivery in Moscow.
Courier delivery is carried out the next day after placing the order, if the goods are in stock. Courier delivery is carried out within Moscow and the Moscow region daily from 10.00 to 21.00. Orders over 10,000 rubles are delivered free of charge.
Shipping via enterprise:
Business Line
ZheldorExpedition
DHL
PONY EXPRESS
ZheldorAlliance
Convenient and fast way delivery to big cities Russia. The parcel is delivered to the office in your city. To receive it, you must present your passport and the number of the cargo declaration (our manager will inform you after sending).
Our company practices individual approach for each client, volume discounts are provided, so the final prices and terms of cooperation may pleasantly surprise you.
Click on the "GET PRICE" button and place a pre-order through the shopping cart - We will prepare a commercial offer for you!
The final price is discussed in each case.Infusion lines extension KD-Line (Germany) for a syringe dispenser of different sizes.
general information
Extension lines "KD-Line" are durable, reliable flexible tubes that provide highly efficient infusion therapy, or rather, long-term and strictly dosed infusions.
Highways also provide the opportunity to:
- To check and control not only the quality, but also the state of the solutions introduced into the patient's blood;
- Form an infusion line in a certain desired way;
- Providing access to catheters at a distance, the ability to perform all the required manipulations at a distance from the point of attachment of the catheter to the patient;
- A significant reduction in the risk of infection of the patient or mechanical irritation of the vessels.
Peculiarities
Extension lines "KD-Line" provide the possibility of intravenous and intra-arterial infusions. For their production, high-quality, durable transparent polyvinyl chloride is used, which is widely used in various branches of medicine. The same material ensures the presence of such a quality fixture as exceptional resistance to various kinds and degrees of kinks.
The main feature and advantage of the infusion lines is the presence on both sides of the Luer-Lok universal connections of the unisex type. They are adapted for use in conjunction with all kinds of injection needles, venous catheters of both types. "Luer-Lok" guarantees complete tightness, safety and reliability of the connection of the components of the infusion line - this allows you to ensure that there are no leaks of solutions and their external contamination.
These lines are type "Lp" or low pressure models. Their principle of operation is based on the force of gravitational influence. At the same time, the maximum indicator of resistance to pressure reaches 4 bar.
We offer
We offer you to buy extension lines of the KD-Line brand from a trusted and reliable manufacturer from Germany. Each unit of production is packed in an individual sterile package. The shelf life of the devices is 5 years.
The mains meet all modern international requirements and standards, are offered in assortment.