Making an advertising sign with your own hands. Original do-it-yourself sign How and from what to make a sign with your own hands

In recent years, people are increasingly trying their hand at opening their own business. Someone can invest heavily in the beginning and take risks, but not everyone has such an opportunity and a large scope is not always needed.

Let's say you want to set up a small repair shop. For a successful implementation, you need knowledge of the matter and a sign that informs people around you about your services. It doesn't have to be expensive, but your customers should notice it.

Now we will share a way how to make a sign with your own hands.

Types of signs

Now there are a huge number of ways to attract the consumer. The oldest of them is the sign. Looking at the photos of signs, you can see their diversity not only in the names and design, but also in the types of signs themselves.

So there are signs consisting of one name, and advertising signs, in which, in addition to the name, a brief essence of the services provided is given.

You can also distinguish signs by the method of manufacture:

• not light (ordinary);
• light (neon signs and LED);
• three-dimensional signs (boxes and letters).

Naturally, shop signs are most often used, but businesses never refuse to use this method of advertising themselves.

What you need to create a sign

To make a sign at home, you must first select the type of billboard. In our case, an ordinary non-illuminated sign was taken.

It is the easiest and fastest to make, and the workmanship will not be much worse than that of professionals.

What is required for this:

• steel sheet two meters (minimum thickness);
• self-adhesive in various colors;
• rag, wipe glued places;
• Double-sided tape
• scissors (ordinary and for metal);
• simple pencil;
• computer, preferably with a printer;
• tape measure or ruler (you can do both);
• plastic card (bank or discount card is suitable).

Making a sign

Let's prepare the base first. It will be a steel sheet measuring 1 by 2 meters. However, our sign will be 2 meters by 50 cm, and since the width of the self-adhesive film is 45 cm, we will reduce the width of the future sheet to this value and make 2 cuts.

As a result, we get 2 bases for future signs 200 cm by 45 cm. In order not to suffer with accurate and even cutting of metal, we recommend ordering its cutting at the store where it was purchased.

For accuracy, after cutting, you need to sand the edges with sandpaper or a file so that everything is even and smooth.

When the base is ready, we move on to creating templates for the name. They are usually made on a computer, and Photoshop or other graphics editors are used as programs. In them, select the desired font and enter the name of the future sign.

After that, print the letters on the printer and cut them out. You will receive layouts that need to be glued to the film, and then cut out along the contour.

The next step is to stick a background on the sheet. This is more difficult to do than it might seem at first glance.

In order for the self-adhesive film to stick to the metal correctly and without wrinkles, the paper is carefully torn off from the middle. After that, with someone's help, they begin to glue the film to the sheet, from the center to the edges.

Note!

Use plastic for leveling. You should not rush when doing it, it will have a bad effect on quality. The length of the film can be made slightly longer than the length of the sheet. This will allow you to bend its edges and, thus, fix the self-adhesive on the metal even more reliably.

The final step will be the even placement of the name of the sign on the base. To begin with, the letters are laid out on a sheet and roughly placed in the middle of the base.

After that, it is necessary to apply an alignment line so that the letters do not “jump” (only if this is not specifically intended). Then, the paper is torn off the film from the letters and strictly along the resulting line they are pasted onto the background of the sign.

To avoid swelling when sticking, as well as with the background, a plastic card is used. The final touch is the edging of the signboard.

As a rule, film cuts from previous stages of work are used on it. The optimal width is 2 cm. The edging is glued from the edge to the center, and it is located both in plain sight and on the reverse side of the base, to hide the uneven edges of the sheet. Accordingly, the width of the strip on the edge should be at least 4 cm.

After completing all the steps, you will get a beautiful and inexpensive sign made by you!

Note!

DIY signage photo

Note!

make a pillar, make a sign, make an advertisement,

Hello, and so let's proceed in order, you have created a business, the first steps are to give information about yourself on the Internet, then the production of outdoor advertising (the most popular pillar and signboard, signs), in order to save on the budget, consider the option of doing it yourself (free advertising is conditional of course :))) )), you need or how to make outdoor advertising. Let's break this down into a few paragraphs.

1. create a layout (requires the possession of graphic editors such as Coral Illustrator or Photoshop). otherwise, you will have to agree with a freelance designer at the company, they can tear off more expensive issue price from 500 rubles. for a simple layout, you can try cheaper. Here it is very important to consider * attract attention and not overload with information. on the street, a person sees ads on average no more than 3 seconds, then it’s superfluous, few people look at large-format “newspapers”, the money wasted. It is important to describe the product, service, in 2-3 words, you can add a fluorescent film ( for brightness, attention attracts checked), an image and a bit of description in small print, this is for interested potential customers. And so the layout is there, let's go to the next paragraph.

2. find a "printer" or, if it is a vector image, find a "floor polisher" where you can cut the film. We place an order, buy a film if it is not included in the service and wait a few days. in total, we have a blank image in our hands. average price from 200-600 rubles per 1 sq.m. depends on the quality of the print, for the street the average quality is enough "for the eyes" :))).

pavement sign (800-1000 rubles) and a sign - we buy a finished frame or we are looking for a welder and order a metal frame from prof. pipes. now you need to decide on the material for the background image, there are many options: galvanized steel 200-250r. per sq.m. this option can be considered anti-vandal, sheet plastics as the easiest option. we cut steel with scissors for metal, plastic with a jigsaw or a clerical knife, to the required size. the background is ready, it's time to roll the image. to help us with a squeegee, pour water and a couple of drops of detergent into the spray bottle. we irrigate the adhesive part and the background part where we will glue the advertisement, apply and expel water with a squeegee. ready. we give at least a day to dry, fasten with screws on the frame, ready!

4. A portable pillar is simpler, with a sign it is more difficult, you need to think over the place of attachment, the method of attachment in advance, coordinate with the building administration, and then proceed with installation.

in conclusion, I want to say before starting work, you need to weigh the pros and cons, so as not to catch the special. effects in the form of "crooked" images, wasted time and nerves. In fact, the simplest products are easier to order in advertising agency. But if you need a quantity, or large volumes of outdoor advertising, it is worth trying to make outdoor advertising yourself. Good luck and good luck in all your endeavors!!!

If the article turned out to be useful, gratitude is welcomed in the form of a click on the buttons of social networks :)))) Thank you!!! (at the bottom of the page)

0 730

A person who was able to organize a business can also think about making advertising with his own hands. Such a decision is especially relevant for those entrepreneurs who have just started organizing their own business and cannot afford expensive advertising. However, in a highly competitive environment, informing the buyer about their services and products using various advertising tools is the norm that allows them to survive in tough market conditions.

An advertising sign is one of the most effective ways to attract the attention of a potential buyer and briefly provide him with all the necessary information about a product or service. Everyone can make it with their own hands if they read the tips below.

Any man will not interfere with high-quality tools in the house. In the article “Choosing a drill: universality or specialization? » learn about the nuances of one of them.

To create an advertising masterpiece on your own, it is not enough to stock up on enthusiasm, you need to have some materials and tools at hand. Moreover, many tools do not even have to be specially bought, because they belong to the standard stationery that each company purchases: scissors, a ruler and a pencil. In addition, you should have a tape measure, discount or bank card (any, as long as it is plastic) and scissors that allow you to cut metal. It will also not do without technology, because a computer and a printer allow you to design an advertisement and print it.

• thin sheet of steel (preferably galvanized). The minimum sheet thickness must be at least 0.6 mm, the optimal format is 1000x2000 mm;
• self-adhesive film. It should be of several colors (any that you like best). It is better to choose an opaque and glossy film with strong adhesion;
• auxiliary materials include rags, double-sided tape and glue (hard).

After everything is ready, you can begin to implement the plan.

One of the ways to promote a new or old business is outdoor advertising. Some have the ability to invest heavily in "promotion", but others can only count on minimal investment. In such a situation, the question arises of how to make a sign with your own hands.

Before you start, decide what the banner should be. It is recommended to pay attention to three factors - availability (at the cost of materials), competent content and manufacturability.

Materials and tools

Answering the question of how to properly design a sign, consider the list of materials and tools needed for this.

Materials to make a beautiful sign:

• Galvanized steel sheets 100 * 200 cm (note that the minimum sheet thickness should be 0.6 mm);
• Self-adhesive film, made in several shades (pay attention to the opaque glossy film);
• Rags;
• Hard glue and double sided tape.

Tools to create signs:

• Stationery scissors;
• Scissors designed for cutting metal;
• Ruler with a simple pencil;
• Roulette;
• PC connected to the printer.

If you do not know how to choose a design or decide on colors yourself, then look at examples on the Internet or take the help of friends, relatives, etc.

Instructions for creating advertising

Step-by-step instructions on how to make a sign:

1. Decide on the parameters of outdoor advertising, and then put the markup on the steel sheet. To make a sign corresponding to the parameters of 200 * 50 cm, the sheet is cut into two parts. In this case, the base of the film must be made up of several segments, since the width of the film is usually 45 cm.
2. Cut the sheet according to the markup. Burrs remaining at the edges can be filed.
3. Make templates for cutting letters. This requires a PC and a printer. You can use any graphics editor. In it, decide what font and letter size is required.
4. All letters must be glued. Choose a film of the shade in which the letters should be made.
5. Roll out a roll of film of the desired color on a sheet of metal, then lay out the letters and decide on the order in which they are placed. Glue the letters carefully.
6. The final stage is edging. For this, hair of the same self-adhesive film can be used.

Now you know how to design a sign yourself.

When deciding how to make a light box, you should first of all study all the subtleties of this type of design. For example, for operation in more severe conditions (outdoors), it will be necessary to prepare a reinforced frame. For premises, a simplified frame is sufficient, in addition, the manufacture of a box with lighting for advertising in this case does not imply the use of a metal profile for installation as side walls.

Learn more about lightbox signs

To attract the attention of passers-by on the street or visitors to a shopping center, store, cafe, a more advanced type of advertising is used - one of the designs of which are boxes. In form, these are volumetric structures illuminated from the inside by light sources of various types. The simplest - rectangular lightbox designs can be made by hand.

The scope of such signs is very wide: from cafes to commercial enterprises. Basically, illuminated boxes are used for advertising, brand promotion or interior decoration. In the latter case, it is customary to use thin light boxes, their illumination is carried out using LED strips located around the perimeter.

View overview

For operation under certain conditions and in order to solve various kinds of problems, special-purpose illuminated boxes are usually used, which are characterized by individual design features.

Types of boxes

Their main varieties:

1. Unilateral.
2. Bilateral.

The first version of the advertising medium is used to install various objects on the facade, since only the front panel is illuminated. Illuminated double-sided boxes can be placed perpendicular to the facade of the building, illuminating both sides of the light box, which increases the effectiveness of advertising. In addition, there are performances that are different for their intended purpose:

• for internal use;
• for outdoor installation.

There is also a division according to the type of lighting: ultra-thin light boxes, thin designs, bulky structures of great thickness. The latest performances are usually used for advertising on the street. But the first two types are used in interior design. In such designs, the use of LED lighting around the entire perimeter of the panel is assumed.

Design and principle of operation

If we consider one-sided boxes, this type involves the use of a front panel to illuminate information, while the back panel is the base for installing lighting equipment. To increase the intensity of the glow, it is recommended to use milky acrylic in the manufacture of the front panel. But polycarbonate, banner fabric, composite can act as the main material.

Double sided device

Side panels are usually made of polymer or metal (steel, aluminum) profiles. The inscription is applied by means of a self-adhesive film. Double-sided boxes have two front panels. The principle of operation of such structures is simple: when turned on, the light sources illuminate the panel with the inscription. Versions operating on LEDs are energy efficient and have a long service life.

Stages of work in the manufacture of a lightbox

A reinforced frame is used for outdoor signs. Its manufacture involves the use of profile pipes of different sections, which is determined by the level of load: from 20x20 to 20-40 mm. All frames are welded from this material. In the future, they must be connected with many jumpers to obtain a frame of sufficient rigidity.

Further, the do-it-yourself construction is cleaned, primed and painted. A metal or polymer sheet is used as the back panel. The front wall is often made of acrylic, since cellular polycarbonate and polystyrene are not resistant to deformation when heated. In addition, these materials are prone to rapid contamination.

To ensure a high intensity of illumination of the sign, you need to calculate the number of LED modules based on their passport data. The manufacture assumes the need to use connecting wires for modules based on LEDs. They use a transformer to operate. The final stage is the installation of a front panel, pre-prepared with your own hands, with a self-adhesive film applied.

Installation and connection

The power supply is used for wiring. It is important that its power matches the number of LED modules used. The intensity of the glow is affected by the depth of the box, the thickness of the front panel, as well as the distance between the LED light sources. But first of all, when making with your own hands, it is important to correctly calculate the number of modules.

Brackets (for double-sided installation on the facade), hangers or support structures (separate installation) are used as signage fastening.

Thus, it is quite possible to make an advertising box with illumination on your own, which is often used as LEDs. They are selected based on the area of ​​the lightbox, the depth of the box, and also on the basis of the electrical parameters indicated in the passport of the light sources. Given the same parameters, the total number of LEDs is calculated.