Do-it-yourself shower cabin repair

Shower cabins are gaining popularity every year. This trend is not surprising, since plumbing devices are compact in size and have good performance. The market offers a wide range of models equipped with mixers, siphons, hydromassage panels. But any fixture breaks, and the shower is no exception.

That's when the question arises: how to fix the damage? There are two options. The first is an appeal to specialists who charge a lot of money for services. And the second is the independent solution of all problems. Of course, repairing shower cabins with your own hands is a troublesome process. But if you have the knowledge and skills, you can fix the problem yourself, saving money on the services of qualified craftsmen.

The most common breakdowns: a brief overview

First you need to talk about why showers break. The main causes of malfunctions are poor-quality installation, non-compliance with operating rules, interruptions in the electrical network. All breakdowns are conditionally classified into three groups:

damage to body parts- failure of the hinges and rollers that open / close the doors, wear of plastic parts, cracks in the tray or glass elements.
malfunction of plumbing equipment- breakdown of the mixer, problems with the siphon, failure of the watering can and hose.
malfunction of electrical appliances- modern shower cabins are equipped with a variety of devices: lighting, radio, water level sensors, speakerphone, steam generator.

If the breakdown is serious, and you do not have practical skills and theoretical knowledge in the field of electronics, call a specialist. Illiterate actions can disable the entire system and harm users.

Do-it-yourself repair of shower cabins must be carried out with skill. To carry out a number of works, you will need different tools and materials: a hammer, glue, putty, plumbing sealant, a sharp knife, a set of screwdrivers, pliers, liquid acrylic, a hardener, a drill. If broken parts and accessories cannot be repaired, replacement is necessary.

Repair of a cracked pallet - fix the situation

The easiest way to solve this problem, many consider buying a new pallet. But everything is not so simple. Finding an identical acrylic liner is extremely difficult. If you do not have extra money, or if you did not find a part that is suitable in size, carefully read the following recommendations.

The elimination of a crack in the pallet is carried out in several stages:

first, the cab frame and pallet are dismantled;
then the cracked product is subjected to visual inspection;
at the next stage, the pallet is washed and thoroughly dried;
further it is necessary to make the jointing of the crack. To do this, you need to install a special nozzle on the drill and gently (a couple of millimeters) embroider the crack. So that in the future the crack does not increase, two shallow holes are made along the edges;
the work surface is thoroughly degreased. For this purpose, a solvent having an alcohol base is suitable. This is an important aspect since other substances can change the structure of the acrylic;
then you should prepare a mixture consisting of liquid acrylic and hardener. Do-it-yourself repair of shower cabins must be carried out in accordance with certain standards. Therefore, it is necessary to strictly observe the proportions indicated in the instructions;
the prepared mixture is applied to the surface. In this case, it is necessary to ensure that the solution fills all the cracks and that there are no cavities;
the pallet is taken out into fresh air, and after drying, the formed tubercles are cleaned with sandpaper;
at the final stage, a pallet is installed, all parts of the cabin are mounted and the tightness of the seams is checked.

And one more important point. If a through hole has formed in the pallet, it is necessary to additionally use epoxy resin and fiberglass. These materials are applied to the outer side of the acrylic liner in several layers. This procedure must be carried out quickly, because the resin hardens quickly.

Is it possible to protect yourself from the occurrence of cracks in the pallet during operation? Yes, for this you need to lay out a brick pillow under the bottom and fill the space with mounting foam. By following the above recommendations, you can easily repair shower cabins with your own hands. The main thing is to have the desire and the necessary materials, tools.

Broken door rollers - how to solve the problem?

The failure of the rollers is a key reason for the termination of the normal operation of the doors. A serious load is placed on small parts, so breakdowns occur often. If the rollers creak or the box doors begin to jam, replacement parts are necessary.

When buying spare parts, you need to pay attention to the diameter of the wheels. In this case, the difference in size should be no more than 5 mm. It is also necessary to have other information: the width of the groove, the distance that the box door goes inward. If you want to purchase high-quality rollers, give preference to products made of brass or stainless steel.
Wheels are replaced as follows:

dismantling of doors;
removing the rollers - for this process you will need a Phillips screwdriver and pliers;
at the next stage, new parts are installed and the fixing nuts are tightened;
door installation;
adjustment of the rollers - on how competently this process will be carried out, the tightness of the fit of the valves, the ease of their sliding along the guides depends.

Do-it-yourself repair of shower cabins (replacing rollers) is a simple job that any man can do. If you want to protect yourself from future breakdowns, you need to treat the wheels with an anti-corrosion agent. Then under the influence of water they will not rust.

Video: repairing a roller in a shower cabin quickly

A few words should be said about the fact that any metal parts of the booths become rusty. If you find a damaged area, follow these steps:

sanding the area affected by rust;
auto-spackling processing;
cleaning of the treated area;
surface degreasing - acetone, ammonia are suitable for this purpose;
staining damage - paint is used in spray cans.

The cabin is leaking - what to do?

In most cases, the cause of leaks lies in illiterate installation and poor-quality seam processing. To eliminate the problem, it is necessary to carry out work on sealing the components. This process goes as follows:

old sealant is removed from the cab - a sharp knife is used for this. You need to act as carefully as possible, trying not to scratch the surface;
disassembly of the cabin frame - the components are washed with soapy water, dried and degreased with a solvent;
the next step is to apply a new sealant;
a few minutes after applying the composition, you can begin to assemble the structure;
at the final stage, the joints are once again treated with sealant, and the excess is wiped off with a dry cloth.

When taking hygiene procedures, splashes of water fall on the walls and other elements. As a result, with improper care, limescale appears, the seals lose their elasticity, crack and begin to let water through. To prevent this from happening, you need to regularly use special care products. Then do-it-yourself repair of shower cabins will not interest you.

Problems with plumbing - the main aspects

During the operation of the shower stall, various troubles occur: faucets fail, a leak occurs in hidden pipelines, a siphon clogs. For troubleshooting, we advise you to pay attention to two important points:

breakdown of the watering can - it occurs due to the failure of the switch. The best option in this case is to replace the watering can;
clogged sewer siphon is the most time-consuming type of repair. To fix the problem, you need to dismantle the pan and remove the siphon. The parts are then disassembled and cleaned. Well, then everything is installed in its original place. To carry out this process, you will need rubber gaskets and a key.

Faucets are the weak point of showers. If the plumbing fixture is clogged with small particles, rust, it is necessary to clean the filter. Every man can cope with such a simple operation. If cracks appear on the mixer body, you can forget about repairs. The solution to the problem is unequivocal - replacing the crane.

During the operation of the mixer, users face other problems:

leak over switch- it occurs for several reasons: nuts are loosely tightened, rubber rings are worn out. Repair work consists in tightening the nuts and replacing the gaskets;
shower modes won't change- a similar problem occurs due to the appearance of a crack on the cartridge. To solve it, you need to replace the part.

With a competent approach to business, you can repair shower cabins with your own hands, saving the family budget. The main thing is to be careful and follow the advice provided in this publication.