Dimensions of corner sinks for the kitchen. Small corner sinks for the kitchen
Housewives spend most of their time in the kitchen. 70 percent of it they work near the sink. Therefore, it must be comfortable and reliable. What model is better to choose so that it is beautiful, comfortable, and lasts a long time? What sizes of corner kitchen sinks are suitable for a small room?
Requirements
The aesthetics of the sink is very important for creating a good mood for the hostess. Who can create a delicious dish near a peeling old sink?
It follows from this that the sink must be strong and reliable, not react to the effects of hot water, chemicals. It should be easy to take care of her.
It is desirable that the sink accommodates a lot of dishes, and at the same time does not take up much space. Reconciling these mutually exclusive requirements is not easy. That's what the corner sink is for.
What to Consider
In addition to the above requirements, it should naturally fit into the interior. The dimensions of the corner sinks for the kitchen largely depend on this. After all, various options for combining devices are possible. Before buying, they decide what additional elements will be present: for example, a filter or which is equipped with a corner sink for the kitchen. Dimensions also depend on the location of the mixer. If it is not placed very tightly against the wall, then detergents can be placed in the vacated space.
They are determined with the presence of additional bowls (for rinsing, defrosting food) and drying for dishes - spaces where you can put washed items so that water can be drained from them.
Corner sinks
Usually they are used for placement in After all, there every square centimeter of area matters. But even in a large room, they can be used to solve some problems, for example, to fill an empty corner.
It will help to imagine how exactly any corner sink for the kitchen saves space, photo. Its dimensions are dictated by the availability of free space. Often they are designed so that the sink bowl is in the very corner. On either side of it are surfaces on which you can put both dirty and clean dishes. In this case, there may be more space than with the usual location of the sink.
A cut at the corner near the bowl will make it easy to approach it.
The area under the sink is used to store various equipment such as a broom or a trash can.
When choosing a corner sink, pay attention to:
- Dimensions of corner sinks for the kitchen.
- The shape, the depth of the bowl.
- Material.
The depth of the bowl is of great importance for comfortable work. Experts consider 16-20 cm to be sufficient depth.
Sizes of small sinks
When choosing the size of corner sinks for the kitchen and considering the possibility of installing them, take into account the presence of nearby points of descent into the sewer and water supply. Here it may turn out that a deeper sink is easier to attach to a sewer pipe. After all, the distance from it to the sink will be less than that of a shallow one.
For a small cramped room, a corner sink with one bowl with a diameter of 40 cm is suitable. You can find small ones with two sections. The bowls can be side by side or at an angle.
If the house has a dishwasher, then a large sink is not needed there. But just where to put it in a small kitchen?
Form
A variety of forms of modern sinks can amaze the imagination of any hostess. Therefore, do not rush to buy the first one that comes across. Usually bowls are round. The latter often turn out to be more spacious than square ones of the same radius. There are oval and even triangular. When choosing, see which shape best matches the style of your kitchen furniture.
The shape of the sink itself depends on the number of bowls. Usually, if there are three containers, a small defrost bowl is located between the large ones. Such sinks are appropriate in large kitchens. They give complete freedom to the hostess. But the price of such sinks is higher.
For small kitchens, a round bowl is well suited. It fits perfectly into the corner. If the sink has 2 bowls, then an interesting option would be to combine a rectangular and triangular or round with an oval. A sink, where there is a large and a small bowl, is called one and a half. Now you can find options with three very small containers of various shapes.
A siphon and a pipe for draining water must be connected to each bowl. The more of them, the less space will remain under the sink.
Types of sinks
Overheads are convenient in that they are simply put on an existing cabinet, which does not require much effort and cost. What should be bigger: a cabinet or a corner kitchen sink? The dimensions of the cabinet should correspond to the size of the sink. Its edges usually overlap the junction, but it sits tightly. Standard cabinet dimensions: width 50 or 60 cm, length 50, 60, 80 cm.
Mortise is more difficult to install. To do this, you need the appropriate tool and certain skills. All cuts and joints are carefully sealed. set flush with the tabletop. This helps keep the workplace clean. They look beautiful, so they are very popular.
The undermount sink is installed using brackets in stone countertops. Its vertical walls form one plane with sink sections. You won't be able to do it yourself. It is not necessary to mount the sink in a material that imitates wood. After all, water will get into the tie-in. This will lead to rapid swelling and delamination of the countertop.
Often install corner cabinets under the sink for the kitchen. The dimensions of the sink must be at least 5 cm less than the width of the cabinet. This is due to the fact that it should not be located very close to the wall. There are recommendations for the distance from the front edge of the countertop to the bowl. It is desirable that she be at least 5 cm away so that the spray does not fly to the hostess.
But will such a kitchen sink built into the corner cabinet be convenient? The size of a small sink is inversely proportional to its depth.
When installing a corner structure, you first need to buy a sink, then select the countertop and furniture.
Material
Stainless steel sinks are very practical. There is no need to be afraid that the enamel will break off and a dark spot will appear, as happens with enameled ones. They have an attractive appearance. The dryer usually has a ribbed surface so that water does not linger under the dishes and drain into the sink. In addition, it is designed so that water does not flow over the edges. A stainless steel sink usually comes with a decorative cap made of the same material. It allows you to close unnecessary holes, if any. After all, sometimes taps come straight out of the wall without passing through the sink.
Depending on the location of the tap, the hole for it can be on the right, left side or in the center of the structure. This expands the possibilities of its connection to the finished water supply.
But they also have disadvantages. First of all, this is a strong noise emitted by water when it hits the bottom. But we have learned to deal with it. Thicker stainless steel is used. A soft sound-absorbing pad is attached to the bottom on the reverse side.
Of course, the quality of the material may be different. Usually it is steel type 18/10. This is reflected primarily in the price. And sometimes it turns out that it is not stainless steel at all. In order not to be deceived, use a simple method. Apply a magnet to the sink. If it sticks, then it's not real stainless steel.
Ceramic
The advantage of sinks made of sanitary ware is the appearance, resistance to scratches. They are not afraid of hot water. Glaze coating, often multi-colored, attracts the buyer. He forgets that such sinks are quite fragile. And violation of the integrity of the glaze will lead to their darkening. Therefore, it is better to install a sink made of porcelain stoneware. She is much more reliable.
Composite
They are created from stone chips, adding acrylic resin to it. These are corian and silacryl. It turns out strong and beautiful products of various colors, which are not afraid of mechanical stress, hot water, or chemicals.
The sound of water is absorbed by the surface of the sink. It is from this material that small corner sinks for the kitchen are often created. Their sizes are small, and the price is high due to the cost of the material.
