Kitchen sink dimensions

03.09.2016 6421

What is a kitchen sink for? She is involved in the processes of cooking, cleaning, washing dishes, etc. More than half of the kitchen affairs are connected with it. Therefore, when choosing, attention is paid to functionality, practicality, reliability and durability.

A modern sink is more than just a sink. This is a work center where there are additional devices, such as graters, cutting boards or drying vegetables. Such accessories save space, facilitate the processes of cooking, cleaning, washing dishes, etc.

Types of kitchen sinks

Kitchen sinks are divided into types:

• With one bowl. A compact copy, offered in a rectangular, square or round shape (the latter is more spacious, with the same volume);
• With two or more bowls. They are performed next to each other in one line or at an angle, but not far from the crane. Available in rectangular only.
• One and a half. There are two bowls with unequal dimensions. The additional compartment is not used for its intended purpose, meat is defrosted in it, food is washed, etc.;
• Corner. Convenient when the headset is positioned in the same way. Otherwise undesirable for installation. It is made in the form of two rectangular bowls located at an angle to each other. The space between them is work surfaces (for drying dishes or cutting vegetables);
• With wing/wings. At the sink, continuation - work surfaces (for drying vegetables, dishes, etc.).

Regardless of the shape, the surface of the sink should be easy to clean from household waste, be resistant to chemicals from detergents and mechanical stress.

Dimensions

The minimum size of a kitchen sink depends on the preferences of the owners. However, the maximum dimensions cannot exceed the cabinet in any way. Therefore, to determine the size, 2 measurements are taken. First, the width of the cabinet is determined, then the length of the fragment or the entire countertop. A second measurement will be required if you plan to take a bowl with a wing/wings.

The sink for the kitchen is selected in accordance with the recommendations:

1. The sides of the product do not touch the wall, 3-5 cm are left in stock. If the dimensions of the cabinet are 50 cm, then the sink is 45 cm.
2. The front sides of the bowl are not chosen outward, they end 3-5 cm from the edge of the countertop. Then the water does not splash.
3. A snug fit of the bowl is allowed only at the apron. And then experts do not advise to install closely.
4. The overhead sink corresponds to the dimensions of the cabinet.

Kitchens with a prism-sink (a bowl combined with a cabinet or cabinet) are large-sized. The standard product size is 870×870. Those. 1 deals with the bowl. Although in this case the table is made together with the table top. Then the sink is suitable for medium-sized apartments.

The other side of the dimensions is the depth of the sink. Ideal is 16-19cm, water does not splash. When the depth is less, it is inconvenient to work. Therefore, the bowl is suitable for the bathroom. A depth of 20 cm is selected if they bake a lot - it is more comfortable to wash the baking sheets.

Sinks shape and dimensions

Size and shape are closely related concepts. The capacity of the sink depends on the first, the ease of use depends on the second. There are the following types:

• Square. Standard sizes: 50x50, 60x60, but there are others. Comfortable sinks, roomy, familiar to housewives. The market is presented in a variety of design, production material, functionality. Suitable for small kitchens
• Rectangular. Standard sizes: 50x125, 50x100, 50x80, 55x50. Suitable stainless steel kitchen tables are narrow but wide. Suitable for non-standard rooms and small kitchens. Come with two or more bowls;
• Round. Standard diameters: 45-51cm. Easy to use, easy care is noted. Suitable for different sizes of kitchens. The disadvantage is the lack of sections for accessories or drying dishes;
• Corner. Ideal for rooms where you need to save usable space;
• Pentagonal. , functional and practical. The dimensions of the table for the kitchen when using these bowls are large, so they are suitable for large rooms.

The shape is the only parameter of the shells, which is selected based on their preferences, because. it does not affect performance.

There are tips to follow to make the sink functional and comfortable to use:

Wings additionally protect the countertop, if available, you need to buy a sink with them.

materials

What to choose: ceramic, composite or metal kitchen sinks? You need to decide on the material after the kitchen is completed, or an exact design project has been created. Otherwise, the sink may not fit.

The choice of material is influenced by:

• Tabletop length. Some items are made too big or too small;
• Style. For the classics, an artificial stone is suitable. Modern style harmonizes with stainless steel. A cozy country - with metal products, artificially aged;
• preferred characteristics;
• Buyer's budget.

A cabinet with a kitchen sink does not necessarily match in terms of production materials, so a bowl is bought based on functionality, and a cabinet is selected for beauty or harmony with interior design.

Stainless steel

Stainless sinks for the kitchen - the first in terms of prevalence. Modern products differ in characteristics from those that were produced decades ago. They are better quality, but also more expensive.

Steel kitchen sinks contain nickel and chrome. Such materials protect against corrosion, create a glossy surface. But there are also disadvantages. The bowls are too noisy. Manufacturers suggest eliminating the effect by installing sound absorbers under the sink.

Sizes of stainless steel sinks start from 38 cm (sink - 31 cm, the rest sides) and above. They are given different forms. Sometimes the manufacturer applies a textured pattern to the bowl. There is a glossy and matte surface.

To check the quality of the bowl, you need to use a magnet. When it glides over the surface, the steel is good. If stuck in place, choose another sink.

Ceramics

Ceramic sinks are endowed with advantages. They are aesthetic, have a beautiful design, resistant to mechanical damage and household chemicals. There are wide and narrow sinks for the kitchen, different in shape. But finding a ceramic round bowl is difficult, if not impossible.

Other advantages include reliability. It is not scary to put a hot pan on the surface, it will not leave marks. It is easy to wash.

Large ceramic kitchen sinks are rarely hidden in a cabinet or under a countertop. They are so beautiful that they are flaunted. Therefore, when ordering or buying, you need to follow the style.

A narrow ceramic sink becomes a decoration of any kitchen. She is petite, but sets the accents. They make the property of the room out of it, when the equipment is built in, and the tools are packaged in cabinets.

Standard sizes of ceramic sinks are common. They are 40x45cm, 42x50cm, 60x90. There are products with two bowls, they are larger in size.

There is a drawback of a ceramic sink. She is vulnerable to hits. If you drop the dishes inside it, there is a risk of a crack, the bowl will leak.

Fake diamond

Sinks made of artificial stone are expensive, but they are environmentally friendly, beautiful, in harmony with all styles, and easy to clean. They are also not afraid of household chemicals. The noise characteristic is minimized, the splash of falling water is absorbed.

Composite shells are made from crushed stones, which are connected with resin with the addition of pigments. Therefore, the shape of the bowl is any, the manufacturer will not have problems making the product to order. There are several shades.

The hostess, as a future sink user, must choose between agglomerate and acrylic. In the first case, the sink is durable and beautiful. It is easy to operate, gives pleasure with its unpretentiousness.

Acrylic products are cheaper, but they are capricious. The stone reacts to mechanical impact, but by grinding it returns to its original state. It is undesirable to put hot dishes in the bowl or pour boiling water.

The depth of the sink for the kitchen made of composite materials is any (15-30cm). The choice is guided by personal preferences and concepts of convenience.

Installation

Installing a sink is not a difficult process, if you make the right choice of product, then they can handle it on their own. But there are a couple of categories that are recommended to be entrusted to professionals:

1. Built-in under countertop sink. Rare type, installation is carried out by plumbers. The cost of products is high. But maximum ease of use is guaranteed.
2. Built-in level with worktop. Installation is not complete without professionals, it has a high cost. Difficult to match colors and styles.

The rest of the sinks are mounted independently. This is easy to do if the length and width of the sink in the kitchen are correctly calculated. Then the product corresponds to a cabinet or countertop (depending on the place of installation).

The corner sink for the kitchen is also easy to install, but it is difficult to make cutouts on the headset. This process is preferably left to assemblers and/or furniture manufacturers.

Mortise sinks

For a stainless steel kitchen, they are often bought, because. the product is easy to install, endowed with high performance. For installation, it is required: to make a cutout in the countertop, corresponding to the dimensions of the sink and wings, if any. Then the sink is installed.

The dimensions of the mortise sink for the kitchen are minimal. Installation is suitable for kitchens where there is a common countertop. This indicates the small size of the room. Therefore, the sink is not large.

The tabletop is allowed from any material: granite, laminate, chipboard, steel, granite or wood. Mortise sinks are made only of stainless steel, so good parameters and hygiene are noted.

Overhead sinks

They put on a cabinet. They are provided with standard dimensions. Since they replace the worktop, the dimensions of the overhead kitchen sinks correspond to it. Sinks are ideal for an inexpensive set with separate cabinets, cabinets. The products themselves are also not very expensive.

The dimensions of the sink for the kitchen do not affect the installation, installation is simple and affordable. There are no complex manipulations with a table or cabinet.

If you install the sink correctly, then there are no cracks and gaps between the cabinets. Otherwise, moisture gets under the bowls, contributes to the appearance of rotting wood, MDF or chipboard.

Ease of installation is also ensured by the fact that overhead sinks are put on the selected module. It does not require pre-drilling holes or adjusting dimensions for a specific product.

WATCH VIDEO

The sink in the kitchen is involved in 2/3 of the affairs of the hostess. Therefore, her choice is made consciously, after considering possible options. And in modern times, it should be not just functional, but aesthetic, in harmony with the interior design. Now you know what sizes of kitchen sinks are.